Guys, when i put a JB ROM, when i make one call, the screen turns black, and the proximity sensor don't work. I only have this black screen, and i'm unable to use the keyboard and even hang up. Sometimes i have to press the power button until the phone turn off.
How to solve this ?
marioneri said:
Guys, when i put a JB ROM, when i make one call, the screen turns black, and the proximity sensor don't work. I only have this black screen, and i'm unable to use the keyboard and even hang up. Sometimes i have to press the power button until the phone turn off.
How to solve this ?
Click to expand...
Click to collapse
Sounds like this issue:
http://forum.xda-developers.com/showthread.php?t=2199788
THANK YOU!
Silellak said:
Sounds like this issue:
http://forum.xda-developers.com/showthread.php?t=2199788
Click to expand...
Click to collapse
Man.... Thank you very much! Worked very well!!!! Thank you again!
marioneri said:
Man.... Thank you very much! Worked very well!!!! Thank you again!
Click to expand...
Click to collapse
No problem! Glad it worked - I remember how frustrating it was when I stumbled across this issue myself.
Out of curiosity, did you end up using the same settings I used? Or did you have to use something different?
for me worked well in PS1 50 and PS2 60.
Related
Hi,
I just upgraded my ROM by my problem is when charging, it can't seem to charge the phone fully, the batt status is charging forever. I figure I have to hard reset my device but I don't know how.
Also, I want to know if there a handsfree mode for talking on the phone or do I need to install an appropriate software? THanks
well the manual should tell how to but
here is it anyway
http://forum.xda-developers.com/viewtopic.php?t=6023&highlight=hardreset
Re: How to hard reset AND Softwarehow to use phone hands-fre
pjfuerte said:
Also, I want to know if there a handsfree mode for talking on the phone or do I need to install an appropriate software? THanks
Click to expand...
Click to collapse
Try pressing, and holding it for 2 secs or so, the green call button during a call!! It will work..
Thanks for the reply.
j_metselaars: It doesn't work. It's the green handset button right? Not the one on screen. Can you help me? Thanks.
pjfuerte said:
Thanks for the reply.
j_metselaars: It doesn't work. It's the green handset button right? Not the one on screen. Can you help me? Thanks.
Click to expand...
Click to collapse
My XDA 2 has no problems with this. It is stated in the maual anyway! But during a phonecall, you press and hold the green hardware button!!! Just as long as it takes to give you a certain Icon in the start bar.... It states speakerphone enabled...
That workes on my XDA 2 and should also work on XDA 1!!!
Now I know there is no notification light for the G2x (ordered mine today- and backordered) but is it possible to have one of the capacitive touch buttons flash to let you know you have a message? such as the home button flashing 2 times a minute or something like that?
I'm no Dev, but just an idea.
Coming from a rooted G1, i'm more than willing to let go of the LED light but this could be a cool concept, if it worked....
wow, already done! http://forum.xda-developers.com/showthread.php?t=1045982
wbales said:
wow, already done! http://forum.xda-developers.com/showthread.php?t=1045982
Click to expand...
Click to collapse
It's half complete. The screen must be active for the LED to work.
Try Noled , free in the market. It places different color icons on your screen when there is a message lots of custom settings and easy on the battery. Works fine on miy G2X
jir591 said:
Try Noled , free in the market. It places different color icons on your screen when there is a message lots of custom settings and easy on the battery. Works fine on miy G2X
Click to expand...
Click to collapse
Simple and does it's job!
Define "active"
bighulk666 said:
It's half complete. The screen must be active for the LED to work.
Click to expand...
Click to collapse
What do you mean by "active"? I have it installed and it works perfectly when the screen is off.
Yatyas said:
What do you mean by "active"? I have it installed and it works perfectly when the screen is off.
Click to expand...
Click to collapse
Yeah, I have no idea what he's talking about either. Works wonderfully for me as well.
Hi. I Have no clue why this this started happening but when i press the power button sometimes it doesn't respond, sometimes it is as if it was pressed twice and sometimes it works ok.
What things can I check?
IceMan6969 said:
Hi. I Have no clue why this this started happening but when i press the power button sometimes it doesn't respond, sometimes it is as if it was pressed twice and sometimes it works ok.
What things can I check?
Click to expand...
Click to collapse
you mean when you wanna wake up the phone/turn it off? do you feel i slight click when you press it?
When I want to wake it up I just need to press hard and it works.
To turn the screen off a lot of the times it turns off and lights up again.
I do feel a slight click when I click it but it seems that I need to press it harder to make it respond.
Sometimes I feel the click and it doesn't seem to receive it.
IceMan6969 said:
When I want to wake it up I just need to press hard and it works.
To turn the screen off a lot of the times it turns off and lights up again.
I do feel a slight click when I click it but it seems that I need to press it harder to make it respond.
Sometimes I feel the click and it doesn't seem to receive it.
Click to expand...
Click to collapse
would you open the back cover and try pressing it directly? you might not find it quick, but it's up there. does it respond normally now?
same...
IceMan6969 said:
same...
Click to expand...
Click to collapse
i fear there's a problem with the button then... if you're under warranty that shouldn't be a big issue...
The problem is that my screen broke a week after this problem started and I'm pretty sure fixing my screen will remove the warranty :-\
IceMan6969 said:
The problem is that my screen broke a week after this problem started and I'm pretty sure fixing my screen will remove the warranty :-\
Click to expand...
Click to collapse
can't both issues be taken as one and fixed the same time?
arabology said:
can't both issues be taken as one and fixed the same time?
Click to expand...
Click to collapse
because it will cost more I though maybe before I send it for repair I'll try and fix this one by myself (repairing the screen seems like a lot of work that can mess up my device for good...
hey man, read through this thread?
http://forum.xda-developers.com/showthread.php?t=1235382
also check this:
http://forum.xda-developers.com/showthread.php?t=1271185
as it seems, this issue is software related. i'd suggest you to flash a custom ROM and try, but you need to take the phone for repair...that will remove your warranty :/
arabology said:
hey man, read through this thread?
http://forum.xda-developers.com/showthread.php?t=1235382
also check this:
http://forum.xda-developers.com/showthread.php?t=1271185
as it seems, this issue is software related. i'd suggest you to flash a custom ROM and try, but you need to take the phone for repair...that will remove your warranty :/
Click to expand...
Click to collapse
Yeah. seems like i'm not the only one with the problem... will try and flash a different rom after fixing my phone Thanks for the help!
I have been using Screenshot by Kastor Soft for a while now. However, it doesn't seem to work on my new Mini. When it takes a picture, the picture is blank. :crying:
Can anyone recommend a screen shot app that is known to work with the new Motorola's?
Volume down and power dont work for you??
faded03cobra said:
Volume down and power dont work for you??
Click to expand...
Click to collapse
Wow, it does. Never knew about that. Thanks. :highfive:
I guess I usually fall asleep before reaching page 74 in the manual.
Hey folks,
I'm almost going nuts with this topic, can't find anything useful on the internet.
Is there any way to activate the Smartwatch 2 without the power-button? Yes, you can activate the back-light by double-tap, but you can't unlock the display without pushing the power-button (and wiping).
Double-tap and then be able to wipe would be nice. Or if I take a look at the watch the back-light goes on and then I already want to have the possibility to wipe the lock screen away. Is that somehow possible?
Regards
scotty86
Gravity Screen is an app which could be help you to asleep your cellphone without touch the physical button... it works easily. I hope help you.
Sent from my SGP512 using Tapatalk
not possible right now, would be nice though, double tap to wake, just like on my G3
try and contact Sony, wish you luck though, i never get answers from them
Prome7eo said:
Gravity Screen is an app which could be help you to asleep your cellphone without touch the physical button... it works easily. I hope help you.
Click to expand...
Click to collapse
#
That's only for phones? I want my smartwatch to turn on
JarlSX said:
not possible right now, would be nice though, double tap to wake, just like on my G3
try and contact Sony, wish you luck though, i never get answers from them
Click to expand...
Click to collapse
Thanks for the answer, but I don't believe in Santa anymore.
Edit:
But maybe the easter bunny exists and I gave it a try: http://talk.sonymobile.com/t5/Wirel...creen-without-power-button/m-p/819109#U819109
i got a few posts on that forum as well, never got a reply from Sony
crossing my fingers the easter bunny will wake up soon
gravity screen is for your phone indeed, not for the watch