[q] help somebody please! - HTC Pico (Explorer)

I downloaded Pimp My ROM from PS and after that my phone doesn't go past the HTC scree. Whenever I boot into recovery, the TWRP logo gets stuck. Help me!

Try removing SD card and booting into recovery
LâTêS†↭ⓛⓘⓝⓚⓢ™CM10 HTC A310E.
If I haven't given you link, it's above. Just click it

Try Re flashing the recovery through adb fastboot ..........!!

Can you please send me the download link for the drivers needed? My PC isn't detecting fastboot.

Farzan Hussain said:
Can you please send me the download link for the drivers needed? My PC isn't detecting fastboot.
Click to expand...
Click to collapse
here :http://forum.xda-developers.com/attachment.php?attachmentid=1765764&stc=1&d=1361981170
just copy your recovery.img in that folder

Never mind, got it to work thanks!
Sent from my HTC Explorer A310e using xda app-developers app

Related

[Q] can't start my phone it shows ==> fastboot udc_start()

please help
1st I am new at this so please answer me in details
Problem : after I got my root access to my phone LG p500 I have installed the ROM manger at my phone
I have tried to back up my ROM from it and my phone restarted and shows me a black screen written inside
-fastboot mode started
-udc_start ()
I have tried to remove my battery but it didn't work , I have tried also to to press power+home+V.up but also
it didn't work .
So please is there any one can help me without removing my App especially the Ndrive because i have no back up for it.
please help me and thank you alot . ))
Re: [Q] can't start my phone it shows ==> fastboot udc_start()
It's a failed recovery installation. U will have to use fastboot method to get a recovery for ur phone
Sent from my LG-P500 using xda premium
thanks but how i can do it ??
allenwalker1998 said:
It's a failed recovery installation. U will have to use fastboot method to get a recovery for ur phone
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
thaanks but how I can do it and it will remove my App or not ???
majdikabb said:
thaanks but how I can do it and it will remove my App or not ???
Click to expand...
Click to collapse
U, know that xda is all about searching so search it will help u a, lot and ya u will lose everything, which is in your phone
Re: [Q] can't start my phone it shows ==> fastboot udc_start()
Just search for installing recovery in fastboot, then reboot into recovery and backup
Sent from my LG-P500 using xda app-developers app
use this. its easy.
http://forum.xda-developers.com/showthread.php?t=1827723
I have tried but my phone was not detected by the program I have tried this and it worked for me
http://forum.xda-developers.com/showthread.php?t=1318750
savagephoenix said:
use this. its easy.
http://forum.xda-developers.com/showthread.php?t=1827723
Click to expand...
Click to collapse

[Q] HTC Explorer boot loop Problem

i have htc explorer (Pico), it was damaged lcd and digitizer. i replaced both but phone is not working it shows HTC logo for 8-10 sec. then restarts. loop until battery removal.
i tried to boot into recovery mode but it also not working. no cwm menu it shows HTC logo for 8-10 sec. then restarts.
i unlocked Bootloader and installed CWM ( file from clockworkmod.com ) but problem not solved. i am not able to getinto recovery mode, so i can't install any zip files or rom files.
please help me.
Download recovery by Yannou90,
Put your phone in fastboot volume down power button*
Connect to the pc run .bat file in Yannou recovery , now you have working cwm recovery.. flash Rom by gamersab don't forget to follow the instructions.
Sent from my HTC Explorer A310e using xda app-developers app
Gamersab said:
Download recovery by Yannou90,
Put your phone in fastboot volume down power button*
Connect to the pc run .bat file in Yannou recovery , now you have working cwm recovery.. flash Rom by gamersab don't forget to follow the instructions.
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
Tried installing recovery by Yannou but problem exists, i think problem in hardware do you think so?
umeshp said:
i have htc explorer (Pico), it was damaged lcd and digitizer. i replaced both but phone is not working it shows HTC logo for 8-10 sec. then restarts. loop until battery removal.
i tried to boot into recovery mode but it also not working. no cwm menu it shows HTC logo for 8-10 sec. then restarts.
i unlocked Bootloader and installed CWM ( file from clockworkmod.com ) but problem not solved. i am not able to getinto recovery mode, so i can't install any zip files or rom files.
please help me.
Click to expand...
Click to collapse
try installing TWRP recovery....
http://forum.xda-developers.com/showthread.php?t=2123503

My ubislate 7c+ stuck in recovery bootloop and the hardware keys are not working..hel

Hi there I installed a cwm recovery on my UBISLATE 7c+ device and it,s stuck in a recovery BOOTLOOP and the worst part is that the harware keys I.e the volume keys which are used to move up and down in cwm are not working so I cant flash any fix... Please tell me some method to unbrick my device using adb cuz adb is working nd device shows up in cmd prompt but attached as recovery... P.s. This device doesnt have a fastnboot mode...Any help would be very much appreciated...
Sent from my GT-P3100 using xda premium
d3mondroid said:
Hi there I installed a cwm recovery on my UBISLATE 7c+ device and it,s stuck in a recovery BOOTLOOP and the worst part is that the harware keys I.e the volume keys which are used to move up and down in cwm are not working so I cant flash any fix... Please tell me some method to unbrick my device using adb cuz adb is working nd device shows up in cmd prompt but attached as recovery... P.s. This device doesnt have a fastnboot mode...Any help would be very much appreciated...
Sent from my GT-P3100 using xda premium
Click to expand...
Click to collapse
same problem here?
i try all options given here but nothing
d3mondroid said:
Hi there I installed a cwm recovery on my UBISLATE 7c+ device and it,s stuck in a recovery BOOTLOOP and the worst part is that the harware keys I.e the volume keys which are used to move up and down in cwm are not working so I cant flash any fix... Please tell me some method to unbrick my device using adb cuz adb is working nd device shows up in cmd prompt but attached as recovery... P.s. This device doesnt have a fastnboot mode...Any help would be very much appreciated...
Sent from my GT-P3100 using xda premium
Click to expand...
Click to collapse
Never mind sold that piece of crap for junk.. ????

[Q] cant able to enter recovery

i try to install clockworkmod recovery using mobileuncle tools
bt after that i reboot into recovery mood
bt now everytime i try to enter in recovery mood
it's showing white screen nd restart my mobile
i have backup file in .backup format
bt can't also able to restore that
need urgent help
my mobile walton primo c2
android 4.2.2
kernel 3.4.5
ruhul0 said:
i try to install clockworkmod recovery using mobileuncle tools
bt after that i reboot into recovery mood
bt now everytime i try to enter in recovery mood
it's showing white screen nd restart my mobile
i have backup file in .backup format
bt can't also able to restore that
need urgent help
my mobile walton primo c2
android 4.2.2
kernel 3.4.5
Click to expand...
Click to collapse
is ur mobile turning on??0r its been bootlooped?
siva aggzz said:
is ur mobile turning on??0r its been bootlooped?
Click to expand...
Click to collapse
yes its turning on
bt can't able to access is recovery to restore .backup file
ruhul0 said:
yes its turning on
bt can't able to access is recovery to restore .backup file
Click to expand...
Click to collapse
Try to reflash your recovery , It could be that the flashing has failed..
Fantassy123 said:
Try to reflash your recovery , It could be that the flashing has failed..
Click to expand...
Click to collapse
how to do that?
i try temporary recovery mood
bt it jst show usb transferring
nd than it doesn't show recovery
I too have issues I need help with. I have spent the last two days reading this forum with little joy, wish a Mod would approve my account so I can get into the right section and post my findings.
ruhul0 said:
how to do that?
i try temporary recovery mood
bt it jst show usb transferring
nd than it doesn't show recovery
Click to expand...
Click to collapse
Bro ... Flash the recovery using sp tools or uncletools... It will solve your problem...
Hit thanks rather posting thanks
SENT FROM MY LAVA IRIS 455 using xda developers app
siva aggzz said:
Bro ... Flash the recovery using sp tools or uncletools... It will solve your problem...
Hit thanks rather posting thanks
SENT FROM MY LAVA IRIS 455 using xda developers app
Click to expand...
Click to collapse
in sp tools cant able to get Scatter
nd i use mobileuncle tools to recover bt it also failed
i want to get cwm recovery
siva aggzz said:
Bro ... Flash the recovery using sp tools or uncletools... It will solve your problem...
Hit thanks rather posting thanks
SENT FROM MY LAVA IRIS 455 using xda developers app
Click to expand...
Click to collapse
i try temporary recovery
in that its showing
usb transfering...
4kb/s anmission ok time:424ms vel:2034
Try changing cables bro... Cz 4kb/s is really somethng very bad issue wth the cable and also try swtchng to dffrnt port ...may b it can hlp yu
SENT FROM MY LAVA IRIS 455 using xda developers app
terminal emulator
ruhul0 said:
i try to install clockworkmod recovery using mobileuncle tools
bt after that i reboot into recovery mood
bt now everytime i try to enter in recovery mood
it's showing white screen nd restart my mobile
i have backup file in .backup format
bt can't also able to restore that
need urgent help
my mobile walton primo c2
android 4.2.2
kernel 3.4.5
Click to expand...
Click to collapse
Do you have terminal emulator installed on phone? if you dont have it, download and install it.
Launch terminal emulator app then type this..
su (then press enter)
reboot recovery (then press enter)
it should put your phone on recovery.

[Q] micromax a27 bricked need help!!!!!!

i just tried to install dreamboltx on my micromax a27 and it just got bricked that means when i turn it on it just shows up a black screen and vibrates plz help me.......the only thing i can access is fastboot mode plz help
Akshay kapoor said:
i just tried to install dreamboltx on my micromax a27 and it just got bricked that means when i turn it on it just shows up a black screen and vibrates plz help me.......the only thing i can access is fastboot mode plz help
Click to expand...
Click to collapse
Download The stock rom from this link https://drive.google.com/uc?id=0B6-h6iUVgfhJMW8yejZybFlfMXc
And put it in your sd card...
Go to recovery mode and flash this zip file from there...
And don't forget to press thanks if I helped...
but the device is not turning onn so how to go recovery mode
Akshay kapoor said:
i just tried to install dreamboltx on my micromax a27 and it just got bricked that means when i turn it on it just shows up a black screen and vibrates plz help me.......the only thing i can access is fastboot mode plz help
Click to expand...
Click to collapse
N'ayam Amarsh'e said:
Download The stock rom from this link
And put it in your sd card...
Go to recovery mode and flash this zip file from there...
And don't forget to press thanks if I helped...
Click to expand...
Click to collapse
but how to access recovery mode if device is not turning onn
Akshay kapoor said:
i just tried to install dreamboltx on my micromax a27 and it just got bricked that means when i turn it on it just shows up a black screen and vibrates plz help me.......the only thing i can access is fastboot mode plz help
Click to expand...
Click to collapse
Check out this link
http://forum.xda-developers.com/showthread.php?t=2520719
Scroll down to micomax a27 title
Sent from my LG-E610 using xda app-developers app
atulkris said:
Check out this link
http://forum.xda-developers.com/showthread.php?t=2520719
Scroll down to micomax a27 title
Sent from my LG-E610 using xda app-developers app
Click to expand...
Click to collapse
I think you should give it to svc if you are in warranty...
This is simple bro. Just download the stock rom from above link & unzip it, you will find system.img file copy it to your computer's fastboot folder & boot your phone to fastboot & give this command in command prompt "fastboot flash system system.img" and press enter. Then your phone will be ok. If any problem feel free to reply @ my email [email protected].
Sent from my Micromax A27 using xda app-developers app
Akshay kapoor said:
but how to access recovery mode if device is not turning onn
Click to expand...
Click to collapse
flash stock backup via SP flash tool
Hello...
were you able to resolve this?
I m also stuck on this after I messed up my phone OS while playing with it.
---------- Post added at 11:52 AM ---------- Previous post was at 11:42 AM ----------
Can we somehow extract the img's from the .pac file and then use fastboot?
The phone is going into fastboot mode only and doesnt respond to this flashing tool at all.
Please suggest.
I cn help u...i tried to instal dreamvolt in my a27 nd its bricked.nobody give me right solution for it. So i tried myself nd find the solution.
First extract dreamvolt zip nd copy boot.img file into fastboot folder nd goto fastboot mod
Type cmnt " fastboot flash boot boot.img .after losding this file ur phone turn on nd off after showing main page of ur phone then restarts.dnt panic nw ur phone cn flash through sp upgrade tool
Open sp upgrade tool nd load the ".pac" file then goto backup option inthe tool and untic all.nw press ok and press the play butten.reimsert ur phones battery and press vol down , connect usb cable .nw u cn see flashing starts on pc.wait to complete the process.good luck.if its helpful to u pls mail me [email protected]

Categories

Resources