Related
Hi guys, I'm using the CM9 ICS with my transformer and I was trying to install a different kernels without any success at all. I've booted into CWM (V5) and installed from sd card but when I restart the machine, It's always with the same kernel. Can someone suggest how to make it work?
How long does the install take? That should give some insight onto what it is doing
yosi199 said:
Hi guys, I'm using the CM9 ICS with my transformer and I was trying to install a different kernels without any success at all. I've booted into CWM (V5) and installed from sd card but when I restart the machine, It's always with the same kernel. Can someone suggest how to make it work?
Click to expand...
Click to collapse
Just to be sure, CWM v5 will not read external uSD card, only the internal storage /sdcard. May I know the kernel you are installing?
It takes about a minute to install.
I've tried a few:
TesteyMeh ICS 0.7
Blades
Others...
All of them seem to install fine but when rebooting I see the same kernel version and I cant OC.
have u tried wiping the cache and dalvik before flashing them?
scottyf79 said:
have u tried wiping the cache and dalvik before flashing them?
Click to expand...
Click to collapse
Yes I have... no good
yosi199 said:
It takes about a minute to install.
I've tried a few:
TesteyMeh ICS 0.7
Blades
Others...
All of them seem to install fine but when rebooting I see the same kernel version and I cant OC.
Click to expand...
Click to collapse
A minute is way too long. Kernels only take like 3 seconds cuz they are small.
Try mount /system under mounts and storage before flashing the kernel.
yosi199 said:
It takes about a minute to install.
I've tried a few:
TesteyMeh ICS 0.7
Blades
Others...
All of them seem to install fine but when rebooting I see the same kernel version and I cant OC.
Click to expand...
Click to collapse
Flashing a new kernel takes a few seconds. After reboot please pay attention to the blue indicator below the Android figure. It this not appears something went wrong with the first stage of the flashing process, invalid image/zip file etc.
Please use the customized CWM version, just not the flashed one from the Rom manager. I'v good experiences with the R2 (internal sdcard only) as well with the R1 (external micro-sdcard only). I preferred the R1 version.
Btw I'v have the best experiences with my TF101G with the CM9 build of March 29 combined with the quevor-test8 (just NOT from the guevor thread but ONLY from the thread of Richard because it's compiled for CM9) kernel, no reboots and no deep sleeps anymore while 3G and Wifi is working fine. Please do not wipe or clear something before flashing the new kernel to prevent Wifi problems. And I'v the best experiences not using the reboot system now from CWM but using power down and switch on the TF manually.
antond57:
i too have been having trouble getting kernels to allow overclocking...i flash one, all looks ok but when i get to tablettop the kernel info appears unchanged and setcpu wont clock past 1000.
could you maybe please post links to the rom and kernel you used? im having trouble locating the Richards R1 and R2 versions. i would like to see if i can repeat your success w/ these versions.
much appreciated.
I have same issue except worse yesterday. I'm on latest CM9. I tried to flash guevro test 9 and I did wipe both cache. Using roach 2 recovery. Just stayed on Asus screen. Blue bar did pop up and take a second or so but nothing. Checked md5 and all was good.
I had to totally flash ROM again after a full wipe because even a restore from recovery wouldn't go past very first Asus screen. I'm not sure what happened but I'm definitely now worried about trying a new kernel again
Sent from my Transformer TF101 using xda premium
eminembdg said:
I have same issue except worse yesterday. I'm on latest CM9. I tried to flash guevro test 9 and I did wipe both cache. Using roach 2 recovery. Just stayed on Asus screen. Blue bar did pop up and take a second or so but nothing. Checked md5 and all was good.
I had to totally flash ROM again after a full wipe because even a restore from recovery wouldn't go past very first Asus screen. I'm not sure what happened but I'm definitely now worried about trying a new kernel again
Sent from my Transformer TF101 using xda premium
Click to expand...
Click to collapse
Yap, I have the same problem. Nandroid restore did not restore to the previous state. For me, re-flash the ROM fixed the problem (no full-wipe).
Try Using clockwork recovery
I have just flashed guevor kernel as well with no problems. I'm using clockwork mod recovery. Have you tried it?
I Flashed derefas built Sense 4.0a Bulid#7 lite last night, it didn't boot and got stuck at beat audio screen. Tried nearly ten times, flashed two versions of TWRP and even latest CWM6. Then for a cross check booted CM10, even that gets stuck at cynogenmod boot animation.
Tried "fastboot flash boot boot.img" even, for flashing the kernel separately which i came to know via XDA forums, even then no use.
Bootloader Unlocked, S-ON.
SD Card: 8GB Class 4, even changed SD Cards and SD-Ext types ext2,3,4.
Not overclocked even once.
Is the phone's final destination is to some garbage after this(hard-bricked) or what?
easygo:) said:
I Flashed derefas built Sense 4.0a Bulid#7 lite last night, it didn't boot and got stuck at beat audio screen. Tried nearly ten times, flashed two versions of TWRP and even latest CWM6. Then for a cross check booted CM10, even that gets stuck at cynogenmod boot animation.
Tried "fastboot flash boot boot.img" even, for flashing the kernel separately which i came to know via XDA forums, even then no use.
Bootloader Unlocked, S-ON.
SD Card: 8GB Class 4, even changed SD Cards and SD-Ext types ext2,3,4.
Not overclocked even once.
Is the phone's final destination is to some garbage after this(hard-bricked) or what?
Click to expand...
Click to collapse
Have you tried doing a FACTORY RESET. If not, no ROM will ever boot on your phone. Either do this from your recovery or HBOOT.
easygo:) said:
I Flashed derefas built Sense 4.0a Bulid#7 lite last night, it didn't boot and got stuck at beat audio screen. Tried nearly ten times, flashed two versions of TWRP and even latest CWM6. Then for a cross check booted CM10, even that gets stuck at cynogenmod boot animation.
Tried "fastboot flash boot boot.img" even, for flashing the kernel separately which i came to know via XDA forums, even then no use.
Bootloader Unlocked, S-ON.
SD Card: 8GB Class 4, even changed SD Cards and SD-Ext types ext2,3,4.
Not overclocked even once.
Is the phone's final destination is to some garbage after this(hard-bricked) or what?
Click to expand...
Click to collapse
well heres a story for you, i obviously have a HTC Explorer (pico) and so does my partner (bought at the same time same place), so i flashed my phone with Sense4.0a Build#7, rebooted afew times but worked fine (all features everything) so then i followed same procedure to flash other pico (she loves sense) and yet it has same results as yours (sometimes got to the homescreen) and some others on the forum, make a logcat of sense rom through adb..........your phone is not bricked.........clean all phone wipe the lot and reflash cyanogen rom, should be fine...............
Re: [Help] [Q] No ROM boots! Phone stuck on boot animation of custom rom.
Same problem in my phone but i am re create sdext part..rom is working
Sent from my HTC Explorer using xda premium
Re: [Help] [Q] No ROM boots! Phone stuck on boot animation of custom rom.
My explorer can't run any oc kernel, don't know why. while my friend explorer supports .is it problem of hardware??
I always ended up burning my nand.build #7 also contain oc kernel I think.
after waiting for 15 min I flashed cm9, I came to know that I burnt my nand as I got fc's
LiVeRpOoL-FaN said:
well heres a story for you, i obviously have a HTC Explorer (pico) and so does my partner (bought at the same time same place), so i flashed my phone with Sense4.0a Build#7, rebooted afew times but worked fine (all features everything) so then i followed same procedure to flash other pico (she loves sense) and yet it has same results as yours (sometimes got to the homescreen) and some others on the forum, make a logcat of sense rom through adb..........your phone is not bricked.........clean all phone wipe the lot and reflash cyanogen rom, should be fine...............
Click to expand...
Click to collapse
Actually, I tried GB Sense based ROMs too, its stuck at HTC initial screen itself. No other rom boots either. How to take logcat? I read a common tutorial and did, but the terminal said as device not found like that. If u've tutorial pls post!
I've not tried O.C so far on my device.
I too facing the same problem after installing latest build..stuck on htc screen..after that i tried restoring my old mini c9 rom..cant get get past the htc screen
i faced same problem when trying to install ruu with different radio version...
even i was unable to boot into recovery...so i flashed a custom recovery through bootloader...wiped everything and installed a new custom rom
^^ so u fixed it or what..can u please elaborate what you did..
:crying:
:crying: same problem wid me bro nw wat to do..... plz helpp...
help
easygo:) said:
I Flashed derefas built Sense 4.0a Bulid#7 lite last night, it didn't boot and got stuck at beat audio screen. Tried nearly ten times, flashed two versions of TWRP and even latest CWM6. Then for a cross check booted CM10, even that gets stuck at cynogenmod boot animation.
Tried "fastboot flash boot boot.img" even, for flashing the kernel separately which i came to know via XDA forums, even then no use.
Bootloader Unlocked, S-ON.
SD Card: 8GB Class 4, even changed SD Cards and SD-Ext types ext2,3,4.
Not overclocked even once.
Is the phone's final destination is to some garbage after this(hard-bricked) or what?
Click to expand...
Click to collapse
hey bro nw how to get our cell to normal bcoz same as happend wid me:crying:
Try cute prince nand erase method.
Install sense (gb) like ateeq Rom then follow here
http://forum.xda-developers.com/showthread.php?p=37805882
Scroll down and see there is a topic named 'Recovering from an oc nand wipe'.
Then try flashing cm rom..
9282gkg said:
hey bro nw how to get our cell to normal bcoz same as happend wid me:crying:
Click to expand...
Click to collapse
I went on to Flash RUU and got stuck at htc logo with four warning symbols /!\, hope thats the end of my phone.
Edit: As far as helps, I dont think no one(including devs) would coming to help us! We're totally !!!!
same problem
i have same problem. i tried flash RUU but now, my phone's screen is black with 4 triangles in corner.
Here is a simple solution
If u can go to recovery
Wipe everything ( by mounting system , data ,cache etc )
Wipe dalvik cache
Then reboot into recovery again
And again wipe everything
( this will clear ur phone problems and will clean the phone )
Now I recommend to flash cm9.1
And that's it u got ur working phone again
sent from Apex Rom Series ( aokp )
ok guys you need to unlock bootloaders again i guess because flashing RUU locks the bootloaders....flash a new recovery of your choice CWM/TWRP Wipe system,boot,dalvik cache,cache and last factory rest and flash a rom like CM9/MiniCM9/CM10/CM10.1 and reboot and make sure your ext2/3/4 partition in sd card is properly formatted before you flash a new rom and after flashing wait for 10 min atleast
---------- Post added at 08:46 PM ---------- Previous post was at 08:44 PM ----------
WARNING never flash RUU in any case because you never know what may happen !!
easygo:) said:
I went on to Flash RUU and got stuck at htc logo with four warning symbols /!\, hope thats the end of my phone.
Edit: As far as helps, I dont think no one(including devs) would coming to help us! We're totally !!!!
Click to expand...
Click to collapse
If you locked the bootloader unlock it, flash custom recovery like TWRP like you did initially. Boot to recovery, flash any rom, choose something stable I suggest flash cm9 build 11 then flash gapps, but remember before flashing rom wipe dalvik cache, factory reset, wipe system, reboot phone if still doesn't boots and you get something weird flash another ruu, choose the right ruu for your country, lock bootloader flash ruu repeat from start if everything works hit thanks keep pressing it lol.
If it doesn't make a video to explain what is happening, but don't worry don't loose hope
Sent from my HTC Explorer A310e using xda premium
DanceOff said:
If you locked the bootloader unlock it, flash custom recovery like TWRP like you did initially. Boot to recovery, flash any rom, choose something stable I suggest flash cm9 build 11 then flash gapps, but remember before flashing rom wipe dalvik cache, factory reset, wipe system, reboot phone if still doesn't boots and you get something weird flash another ruu, choose the right ruu for your country, lock bootloader flash ruu repeat from start if everything works hit thanks keep pressing it lol.
If it doesn't make a video to explain what is happening, but don't worry don't loose hope
Sent from my HTC Explorer A310e using xda premium
Click to expand...
Click to collapse
Htc phones never bricks
There r always many solution
sent from Apex Rom Series ( aokp )
Bro phone is stuck on boot animation so cnt use that method if der is anther methd dan plz help
Sent from my GT-I9082 using xda premium
Clean everything install twrp 2.4.0.1 , mount everything and install cm 9.1
Sent from my HTC Explorer A310e using xda app-developers app
hi
i have a optimus 3d p920 on orange (uk) (just unlocked to any network)
android version- Gingerbread 2.3.5
software version- V20d june 2012
everytime i try and put a rom on, the phone goes into boot loop (lg logo then unlit black screen)
i root using megatron
install ROM manager
install clockwork recovery 6.0.1
I download zip
plug in phone
cody zip to sd card but NOT external sd card (filemanager shows it as /mnt/sdcard)
go on ROM manager
click on boot in recovery
already done back up of original rom saved on sd card clockworkmodrecovery file
i wipe data/format
i wipe cache partition
then go i go into advance then wipe cache dev
then i go back on to menu
click on install rom from sdcard
find the zip then click yes to install
says its installed then i click reboot and then it becomes stuck
sometimes it would install CM10 or PACMAN (after turning it on and off for a while) then after about 5 mins would reboot its self and get stuck again
so i will then unplug battery, hold Vol up connect usb and open up lg support tool and then recover as carnt get into cwm recovery and install backup from sd card.
i have noticed in the mount/format tab that only the /data is mounted and not (as follows)
/external sd card
/sdcard
/system
/emmc
as they have mount next to them...
its driving me mental
so please help
(if posted in wrong section then sorry im new)
dont bother with GB, we have ICS!!
its much smoother and touch response is way better than GB. Just follow this link
http://forum.xda-developers.com/showthread.php?t=1963847
([ROM][ICS][P920/P925]XBSA ICS V7.2 Custom Full 3D ROM (V28B))
please click on thanks if you think I helped.
schubeir
schubeir said:
dont bother with GB, we have ICS!!
its much smoother and touch response is way better than GB. Just follow this link
http://forum.xda-developers.com/showthread.php?t=1963847
([ROM][ICS][P920/P925]XBSA ICS V7.2 Custom Full 3D ROM (V28B))
please click on thanks if you think I helped.
schubeir
Click to expand...
Click to collapse
Thank you I got the same result when trying your last rom version 6.
But il try this using TeamWin recovery not cwm and defo not ROM Manager (is it a common problem with ROM Manager)
Thank you
I flashed v28b.bin and the .fls through smartflash tool and il installed and then went into twrp recovery to install the ROM after.
I wiped everything and installed the rom rebooted all installed but now i dont have any network or imei.
Baseband now says omap4430/xmm6260 but no service only wifi.
Also the device kept on rebooting after a while to lg boot screen then the
Screen would go dodgy before reloading back to o.s.
So i restored just the v28b but still no network.
Iv just read i should have hardboot after flashing v28b and before install the rom (would that have caused the problems)
After I rooted my pico and installed CWM and took a nand backup. After that i tried Jaggy Dzire rom which installed perfectly but i don't know how it got bootloop. so i restored my backup and now i can't install any other rom than stock.. even if i try it will get stuck at boot logo or will go in bootloop.
i also managed to get lastet asia_india stock rom and to my wonder it works very well although i can't get link2sd work even if i try different 2nd partition formats( fat, fat32, ext3/4). on doing ext2 it will get stuck on boot.
and i'm curious about do i have nand burnt? ( pico is barely 1 week old).
and would also like to get a better ics/sense rom to use with and yeah, no overclock and stuff. as i can't get anything else than stock rom or my nand back up to boot normally !!.
Current Setup : Philz CWM || pico_asia_1.43.720.2_rev3 (rom).
Qmarks said:
After I rooted my pico and installed CWM and took a nand backup. After that i tried Jaggy Dzire rom which installed perfectly but i don't know how it got bootloop. so i restored my backup and now i can't install any other rom than stock.. even if i try it will get stuck at boot logo or will go in bootloop.
i also managed to get lastet asia_india stock rom and to my wonder it works very well although i can't get link2sd work even if i try different 2nd partition formats( fat, fat32, ext3/4). on doing ext2 it will get stuck on boot.
and i'm curious about do i have nand burnt? ( pico is barely 1 week old).
and would also like to get a better ics/sense rom to use with and yeah, no overclock and stuff. as i can't get anything else than stock rom or my nand back up to boot normally !!.
Current Setup : Philz CWM || pico_asia_1.43.720.2_rev3 (rom).
Click to expand...
Click to collapse
Nope no band burnt
U need to flash recovery again ( I recommend latest twrp )
And try formatting everything
But don't format sd card
Then flash the rom and u will be good to go
Sent from my HTC Explorer using xda premium
I got my phone working again. Running Cyanogenmod 9 with TWRP Recovery.
Here's what i did.
Installed pico_asia_1.43.720.2_rev3.
Installed twrp-2.5.5.0.
then copy-pasted flash_erase file in system/xbin and did ADB command.
reboot.
formatted partitions all of them ( except SDCARD and SD-EXT, can't format it, error occurs as "can't mount SD-EXT || can't format with mk2fs" ).
Installed cm-9-20130304-UNOFFICIAL-pico. and reboot.
And now, Working like a charm.
Thanks for Replying.
Great Work Guys
Qmarks said:
I got my phone working again. Running Cyanogenmod 9 with TWRP Recovery.
Here's what i did.
Installed pico_asia_1.43.720.2_rev3.
Installed twrp-2.5.5.0.
then copy-pasted flash_erase file in system/xbin and did ADB command.
reboot.
formatted partitions all of them ( except SDCARD and SD-EXT, can't format it, error occurs as "can't mount SD-EXT || can't format with mk2fs" ).
Installed cm-9-20130304-UNOFFICIAL-pico. and reboot.
And now, Working like a charm.
Thanks for Replying.
Click to expand...
Click to collapse
So there is no need of ClockWorkMod Recovery to flash CM9 or 10? I thought that was necessary. I never tested cyanogenmod because I never had CWM Recovery installed. But maybe I will give a try. Now I am on NextGen 1.5 and is running great. I changed it 3 days ago. Back than I had derefas's HTC Sense 4.0a Build #8, but had some problems with this and because I have 0 Thanks, I can't post in the actual thread. I would appreciate everyone giving me some "Thanks", if that's possible, so I can post in developement threads. Anyway, wainting for akya's new build. For me it's the best ROM, although it's GingerBread, but hey, it works flawlessly. I begin to think that HTC know what they are doing since they didn't updated the Pico's software to ICS. Gingerbread run's great. Anyways, appreciate derefas, shekhutanwar, Apex-Predator and other's efforts for trying to bring ICS to Explorer. Great work guys. Keep it up!
A custom recovery is must, it's upto you which one you choose. I have TWRP because it's recommended here for our pico and is really easy to use. CWM is none less though and I forgot to mention that I had CWM prior to flashing pico_asia_1.43.720.2_rev3 and after it I flashed TWRP. And as for CM, I used to have it on my Galaxy Note and have liked it since I noob-ly flashed it on my Galaxy Y. CM is way better than Sense/Touchwiz ( although Sense has more appealing UI and TouchWiz is just b.llsh.t). Anyway, Its upto you to decide and yeah, thanks to all our devs here for there precious works.
Qmarks said:
After I rooted my pico and installed CWM and took a nand backup. After that i tried Jaggy Dzire rom which installed perfectly but i don't know how it got bootloop. so i restored my backup and now i can't install any other rom than stock.. even if i try it will get stuck at boot logo or will go in bootloop.
i also managed to get lastet asia_india stock rom and to my wonder it works very well although i can't get link2sd work even if i try different 2nd partition formats( fat, fat32, ext3/4). on doing ext2 it will get stuck on boot.
and i'm curious about do i have nand burnt? ( pico is barely 1 week old).
and would also like to get a better ics/sense rom to use with and yeah, no overclock and stuff. as i can't get anything else than stock rom or my nand back up to boot normally !!.
Current Setup : Philz CWM || pico_asia_1.43.720.2_rev3 (rom).
Click to expand...
Click to collapse
By which method you made your sd-ext partition
Bcoz it seem to like, there is some problem with your sd-ext partition
Sent from my HTC Explorer using xda premium
At first I tried it with MiniTool Partition wizard( Space>512 Mb and tried all recommended partition format. didn't worked) and then again tried through CWM also this time it didn't worked.it showed that partition creation was successful but upon loading the card on my pc it would still displayed as 1 single partition having all the available memory space ie. 1.83 gb.
but then after installing TWRP and CM9 , I tried again through TWRP and made ext3 partition sized 512 MB and using Link2SD .working good since then.
i suppose its an issue on cwm side and the rom which was not able to detect and mount second partition.
1 - i apologies in edvense for my multi post, i cant post in the relevant tread until i have 10 posts
2 - and for my poor English and horrendous spelling errors
i have a p500h (OldBB)
using "arnab321-Tasssadar-MultiROMMgr-v5.1" i dual boot
wen the story start i have CWM Recovery v5.0.2.0 CM10.2 on internal and CM7.2 on sd-ext
first i flashed mukulsoni`s flashable CWM Recovery v6.0.4.6
booted to CM10.2, works fine
booted to CM7.2, works too :laugh:
No, this recovery for KitKat only, as you must be aware that KitKat ROM flash on "Set_Metadata_Recursive" and all previous JB and others were using SET_PERM_RECURSIVE.
The update can take backup and restoration of sdext, which was disabled in previous one. Enjoy....
Click to expand...
Click to collapse
stage 2 installing CM11
i installed CM11
installed arnab321-Tasssadar multi rom
i had to restore my sd-ext partition, it was formatted during the CM11 install
and rebooted to CM7.2
still working
next test will be installing CM7.2 on the internal and see if its somting speceal in the rom i use or the arnab321-Tasssadar multi rom
road block
i cant flase the cm7.2 rom i get an error
format() expects 5 args got 3
and wen i try to flash CWM Recovery 5.0.2.0 i get install abortend
from log
I:Cant`t partition non-vfat: /storage/sdcard0 (vfat)
ill try using an app
end
i used an app to get back to 5.0.2.0
flashed my CM7.2 rom
flashed 6.0.4.6
boot
and CM7.2 runs
next try: slimrom v1.3-oldBB (an old rom from rec v4 days)
cant flash inn 6.0.4.6 "format() expects 5 args got 3" error
using an app to got back to recovery 5.0.2.0
flasing the slimrom
flasing 6.0.4.6
boot
slimrom runs whit no problem
my congloson: ther is no problem booting to old android like 2.3.7 (didnt test ICS and JB but i think thy will boot to)
the only problem is in the install scrips
the old probably wont get an updated scrips but ther is still work on 2.3.7 roms that mite get install scripts that can work in 6.0.4.6
that 4 postes 6 more to go
p.s.
i use a 2.3.7 rom called nexusme-kitkat
i understand it has some paid apps in it
can any on tell me wat thy are id like to pay for them
and id like to know what camera is in ther
thank for any help