After I rooted my pico and installed CWM and took a nand backup. After that i tried Jaggy Dzire rom which installed perfectly but i don't know how it got bootloop. so i restored my backup and now i can't install any other rom than stock.. even if i try it will get stuck at boot logo or will go in bootloop.
i also managed to get lastet asia_india stock rom and to my wonder it works very well although i can't get link2sd work even if i try different 2nd partition formats( fat, fat32, ext3/4). on doing ext2 it will get stuck on boot.
and i'm curious about do i have nand burnt? ( pico is barely 1 week old).
and would also like to get a better ics/sense rom to use with and yeah, no overclock and stuff. as i can't get anything else than stock rom or my nand back up to boot normally !!.
Current Setup : Philz CWM || pico_asia_1.43.720.2_rev3 (rom).
Qmarks said:
After I rooted my pico and installed CWM and took a nand backup. After that i tried Jaggy Dzire rom which installed perfectly but i don't know how it got bootloop. so i restored my backup and now i can't install any other rom than stock.. even if i try it will get stuck at boot logo or will go in bootloop.
i also managed to get lastet asia_india stock rom and to my wonder it works very well although i can't get link2sd work even if i try different 2nd partition formats( fat, fat32, ext3/4). on doing ext2 it will get stuck on boot.
and i'm curious about do i have nand burnt? ( pico is barely 1 week old).
and would also like to get a better ics/sense rom to use with and yeah, no overclock and stuff. as i can't get anything else than stock rom or my nand back up to boot normally !!.
Current Setup : Philz CWM || pico_asia_1.43.720.2_rev3 (rom).
Click to expand...
Click to collapse
Nope no band burnt
U need to flash recovery again ( I recommend latest twrp )
And try formatting everything
But don't format sd card
Then flash the rom and u will be good to go
Sent from my HTC Explorer using xda premium
I got my phone working again. Running Cyanogenmod 9 with TWRP Recovery.
Here's what i did.
Installed pico_asia_1.43.720.2_rev3.
Installed twrp-2.5.5.0.
then copy-pasted flash_erase file in system/xbin and did ADB command.
reboot.
formatted partitions all of them ( except SDCARD and SD-EXT, can't format it, error occurs as "can't mount SD-EXT || can't format with mk2fs" ).
Installed cm-9-20130304-UNOFFICIAL-pico. and reboot.
And now, Working like a charm.
Thanks for Replying.
Great Work Guys
Qmarks said:
I got my phone working again. Running Cyanogenmod 9 with TWRP Recovery.
Here's what i did.
Installed pico_asia_1.43.720.2_rev3.
Installed twrp-2.5.5.0.
then copy-pasted flash_erase file in system/xbin and did ADB command.
reboot.
formatted partitions all of them ( except SDCARD and SD-EXT, can't format it, error occurs as "can't mount SD-EXT || can't format with mk2fs" ).
Installed cm-9-20130304-UNOFFICIAL-pico. and reboot.
And now, Working like a charm.
Thanks for Replying.
Click to expand...
Click to collapse
So there is no need of ClockWorkMod Recovery to flash CM9 or 10? I thought that was necessary. I never tested cyanogenmod because I never had CWM Recovery installed. But maybe I will give a try. Now I am on NextGen 1.5 and is running great. I changed it 3 days ago. Back than I had derefas's HTC Sense 4.0a Build #8, but had some problems with this and because I have 0 Thanks, I can't post in the actual thread. I would appreciate everyone giving me some "Thanks", if that's possible, so I can post in developement threads. Anyway, wainting for akya's new build. For me it's the best ROM, although it's GingerBread, but hey, it works flawlessly. I begin to think that HTC know what they are doing since they didn't updated the Pico's software to ICS. Gingerbread run's great. Anyways, appreciate derefas, shekhutanwar, Apex-Predator and other's efforts for trying to bring ICS to Explorer. Great work guys. Keep it up!
A custom recovery is must, it's upto you which one you choose. I have TWRP because it's recommended here for our pico and is really easy to use. CWM is none less though and I forgot to mention that I had CWM prior to flashing pico_asia_1.43.720.2_rev3 and after it I flashed TWRP. And as for CM, I used to have it on my Galaxy Note and have liked it since I noob-ly flashed it on my Galaxy Y. CM is way better than Sense/Touchwiz ( although Sense has more appealing UI and TouchWiz is just b.llsh.t). Anyway, Its upto you to decide and yeah, thanks to all our devs here for there precious works.
Qmarks said:
After I rooted my pico and installed CWM and took a nand backup. After that i tried Jaggy Dzire rom which installed perfectly but i don't know how it got bootloop. so i restored my backup and now i can't install any other rom than stock.. even if i try it will get stuck at boot logo or will go in bootloop.
i also managed to get lastet asia_india stock rom and to my wonder it works very well although i can't get link2sd work even if i try different 2nd partition formats( fat, fat32, ext3/4). on doing ext2 it will get stuck on boot.
and i'm curious about do i have nand burnt? ( pico is barely 1 week old).
and would also like to get a better ics/sense rom to use with and yeah, no overclock and stuff. as i can't get anything else than stock rom or my nand back up to boot normally !!.
Current Setup : Philz CWM || pico_asia_1.43.720.2_rev3 (rom).
Click to expand...
Click to collapse
By which method you made your sd-ext partition
Bcoz it seem to like, there is some problem with your sd-ext partition
Sent from my HTC Explorer using xda premium
At first I tried it with MiniTool Partition wizard( Space>512 Mb and tried all recommended partition format. didn't worked) and then again tried through CWM also this time it didn't worked.it showed that partition creation was successful but upon loading the card on my pc it would still displayed as 1 single partition having all the available memory space ie. 1.83 gb.
but then after installing TWRP and CM9 , I tried again through TWRP and made ext3 partition sized 512 MB and using Link2SD .working good since then.
i suppose its an issue on cwm side and the rom which was not able to detect and mount second partition.
Related
Currently I am in a soft brick state- I cant remember which CM- 9 either cm-9-20120614-EXPERIMENTAL-skyrocket-alpha5.zip, or cm-9-20120709-NIGHTLY... (I can see that those are the only two I have on my sd card. I am on an ATT GS2 skyrocket
If I boot normally - it stays stuck on the CM9boot screen.
I can use the 3 finger method to boot into CWM 5.8.4.3
While searching for answers I read that this CWM is broken.
Initially I was trying to go back to an earlier recovery. CWM would see the recoveries on the SDcard, but when I tried to recover- it would not mount from the SD card.
I got to CM( by using odin to put an earlier CWM, and superuser on the phone, then installed Rom manager, then used rom manager to flash CWM (via tmobile sgs2) then updated to CWM touch...
When I tried using the CWM to factory restore and cache wipe it starts then hangs I cant install zips from the external SD card, or any recoveries...
I'm figuring worst case - I can go back to ODIN, and do stock recovery http://forum.xda-developers.com/showthread.php?t=1342348 , then flash the non touch CWM, superuser http://forum.xda-developers.com/showthread.php?t=1340526, then flash a recovery from my sd card??
Is there something else I might have missed in trying to get back to a functional state without going to odin?
Many thanks in advance for any assistance
Ihab
ihabelnaccash said:
Currently I am in a soft brick state- I cant remember which CM- 9 either cm-9-20120614-EXPERIMENTAL-skyrocket-alpha5.zip, or cm-9-20120709-NIGHTLY... (I can see that those are the only two I have on my sd card. I am on an ATT GS2 skyrocket
If I boot normally - it stays stuck on the CM9boot screen.
I can use the 3 finger method to boot into CWM 5.8.4.3
While searching for answers I read that this CWM is broken.
Initially I was trying to go back to an earlier recovery. CWM would see the recoveries on the SDcard, but when I tried to recover- it would not mount from the SD card.
I got to CM( by using odin to put an earlier CWM, and superuser on the phone, then installed Rom manager, then used rom manager to flash CWM (via tmobile sgs2) then updated to CWM touch...
When I tried using the CWM to factory restore and cache wipe it starts then hangs I cant install zips from the external SD card, or any recoveries...
I'm figuring worst case - I can go back to ODIN, and do stock recovery http://forum.xda-developers.com/showthread.php?t=1342348 , then flash the non touch CWM, superuser http://forum.xda-developers.com/showthread.php?t=1340526, then flash a recovery from my sd card??
Is there something else I might have missed in trying to get back to a functional state without going to odin?
Many thanks in advance for any assistance
Ihab
Click to expand...
Click to collapse
Hi there,
I recently experienced the same thing, and it was a hassle to fix--but I have got my phone working each time. The downside being that I /had/ to switch over to Odin. Mind you, I am not necessarily experienced with Android, so I can't really say that this is the only way.
At any rate, here's what I did to get it back to normal:
Load up Odin
Put it in download mode -- I assume you know to hold the volume keys and then plug in the USB.
Flash either the ICS leak or the stock 2.3.5 Gingerbread.
You should be back to good. I hope you backed everything up in either Kies or some other resource...else you're in for a hell of a time setting stuff up.
Oh: bad news about the 2.3.5 stock is that, as far as I can tell, you're unable to upgrade to 2.3.6. In turn, you're then unable to update to the official ICS through Kies or OTA. I assume you don't mind, considering you're trying to flash a new rom anyway.
Anyway, I do hope there is some bit of clarity on getting CM9 on the Skyrocket. As of now I have still been unable to do it. Just as you, no matter the settings I try, I end up being stuck at that screen. The only difference between your method and mine is that I completely did mine through CWM...nothing through ROM Manager. (Actually, I believe I tried a few differing methods involving the CWM touch and non-touch...followed many different guides but still no good.)
Hope you get it back to a functioning state. If you get CM9 working on the Skyrocket, I'd appreciate you sending a bit of details on how to do so.
EDIT: I am now on CM9. Through magic, ponies and friendship I have failed to accomplish this feat. But by pure science and the blood of a pony, I have successfully installed CM9.
After you've restored to 2.3.5 or the ICS leak (the one I was on), do the following:
- Grab the recovery-clockwork-touch U27 described below. Flash it.
- Download both the newest CM9 build from their website, as well as Google Apps, and then copy those to your external SD.
- Follow this guide: http://www.teamchopsticks.org/p/install-guide.html. Here's what's relevant to you:
Wipe data/factory reset.
Format /system (mounts and storage->format /system).
Install the CM9 zip from SD card.
Install the gapps zip from SD card.
ONLY IF YOU ARE ON TOUCH CWM RECOVERY: Format /cache (mounts and storage->format /cache)
Reboot. Let it sit for a few minutes after the first boot. Be patient.\
Click to expand...
Click to collapse
After ~10 minutes you should be fine. Mine took less, but I'd bet it could take longer. Please follow those directions above EXACTLY. I'll be happy to help you in any way I can if you reply to this thread/ send me a PM.
When I softbricked with the latest CWM I wasn't able to return back since it wouldnt detect my SDcard so I just loaded up odin and used recovery-clockwork-touch-5.8.1.3-hercules.tar and was able to read my SDcard again which had all my backups and CM9 files. I have flashed every version of CM9 every since and still using this CWM version and havent had any problems. :good:
All better now- I used ODIN to restore to stock, then used it again to put CWM (non-touch) back on, then added superuser, then just did a restore from SDcard! Muchas Gracias all!
Should I be able to then use a restore of when I had a working CM9 (and backed up with CWM)? Or would I have to do all the cache wiping/ factory reset like I did to install it the first time before using such a recovery? (and I will try that recovery- clockwork touch hercules... latrer tonight from home)
ODIN tar to restore back to factory. I got the boot loop too. Only until after I flashed CM9 then flashed dark side wipe cache only would CM9 work for me. Only on regular CWM though. Try and give that a go.
Sent from my SAMSUNG-SGH-I727
I hate to post this but after 3 days of trying to get this damned phone serviceable I am seeking higher powers.
I have viewed just about every thread I can, and everytime i think I'm getting close only to be disappointed.
I was attempting to root a Rogers HTC One X for a friend. Ive rooted 3 other devices prior to this one without issue and constantly custom rom my own device (HTC Raider).
As of now, I CAN: Boot to Hboot (1.11.000), Flash Custom Recovery (Have tried TWRP and CWM, can enter successfully cant do much else), flash things via fastboot.
I CANNOT boot to OS. Its apparently gone. so as such, i have no access to the SD-ext. I CAN mount USB in TWRP but while it shows up in windows as a storage device, I CANT see it on the phone, so i cant flash it. I CANNOT mount in CWM.
I have attempted to RUU via fastboot. I have gotten errors for signature, size and model. Even the stock, non-root one (1.94) stated that the size is incorrect. Im also seeing alot of Errors regarding android-info.txt.
I really desperately need to get this running. Which ever rom. i dont care. If i can get stock, fine, if not Custom rom/kernel.
My biggest issue is not having access to the sd-ext and this phone, for some stupid reason, does not have a microSD slot, which would have made this whole issue alot easier.
I dont know if im missing a file or a step. Im really not sure where to go next.
If you have files that will work and can tell me how to do it, I will forever be in your debt.
It seems to me that i SHOULD be able to run fastboot update xxx.zip and just have it fix it but thats when im getting the android-info.txt errors.
If i could manually flash the 3 files through fastboot (system and boot more than recovery), i would think it would work but nooooooo.
Is there any way any of you know how to get me to atleast being able to see my sd-ext on both windows and TWRP so i can flash it that way? ANYTHING?
So, Got it up and running with Team Nocturnals Rom.
What I had to do was wipe SD and caches in TWRP. Flashed CWM from fastboot. Wiped SD and cache AGAIN. Flashed back to TWRP. Wiped SD and Cache. Rebooted to fastboot. Flashed the boot.IMG. Rebooted to recovery. Mounted USB. Windows detected it. Formatted to fat32. Copied the .zip to SD and installed. Problem solved.
Stock 2.20 Rom that's around didn't work, deodexed rooted stock didnts, nor did Android Revolution HD.
I still thank all of you, because even though I got this working myself, it was bits and pieces of every other thread that got me to that point. Thank you all.
Sent from my HTC Velocity 4G X710s using xda app-developers app
Kesler84 said:
So, Got it up and running with Team Nocturnals Rom.
What I had to do was wipe SD and caches in TWRP. Flashed CWM from fastboot. Wiped SD and cache AGAIN. Flashed back to TWRP. Wiped SD and Cache. Rebooted to fastboot. Flashed the boot.IMG. Rebooted to recovery. Mounted USB. Windows detected it. Formatted to fat32. Copied the .zip to SD and installed. Problem solved.
Stock 2.20 Rom that's around didn't work, deodexed rooted stock didnts, nor did Android Revolution HD.
I still thank all of you, because even though I got this working myself, it was bits and pieces of every other thread that got me to that point. Thank you all.
Sent from my HTC Velocity 4G X710s using xda app-developers app
Click to expand...
Click to collapse
Ummmm android revolution is for the international one x.... Maybe that's how u f'd it up in the first place? Idk just be careful the threads are kinda similar ...
No, I didn't even touch Revolution until it was already not working. I was originally just rooting the stock. It wasn't until it softbricked that I attempted any customs.
Sent from my HTC Velocity 4G X710s using xda app-developers app
RESOLVED
This is 4th brick and i normally know how to fix it but this time i cant fix it
Ok so one day my phone was acting up it wouldn't turn on
I flashed repartioned and flashed csc/phone/froyo from hawk (ODIN) - everything was ok
Then i flashed gingerbread (odin)- phone turned on everything worked
Afterwards i rooted it (super one click)- it worked
got sgs kernel flasher
Flashed antonx kernel for gb
when i tried to install cm9 it didnt work i checked logs and got this (im using cmr 6.0.1.2)
I: Cant partition unsafe device: /dev/block/mmcb1k0p
I:Cant format unknown volume :/external_sd
I: cant format unknown volume: /emmc
Any ideas?
Also i was trying to do this
flash froyo + everything from hawk
Flash gingerbread
root
get sgs kernel flasher
flash kernel
install cm9
install cm10
restore my cm10 backup
That's a lot of steps that aren't needed.
http://forum.xda-developers.com/showthread.php?t=1358498 2nd post, eollie's one click to stock.
1)Run that, you have stock GB, root, and CWM all in 1 click.
2)Reboot to recovery, wipe and install CM9
3)Profit??
Ill try that
getochkn said:
That's a lot of steps that aren't needed.
http://forum.xda-developers.com/showthread.php?t=1358498 2nd post, eollie's one click to stock.
1)Run that, you have stock GB, root, and CWM all in 1 click.
2)Reboot to recovery, wipe and install CM9
3)Profit??
Click to expand...
Click to collapse
Thanks for the quick reply ill try that
What CM where you trying to install? Are phone doesn't use /emmc or /external_sd. That's why it failing. Wrong zip from the wrong phone. Look under your battery and tell us what the model number says before you go any further and end up with a true brick.
cmr
... after i installed antonx's kernel i tried to install cyanogen mod 9 and i was using the recovery included in that
And yes i know what phone i have.. sgs4g (sgh-t959v)
What Cm9? It's trying to write to partitions that this phone doesn't use. Link the ROM please.
link
Here you go
http://forum.xda-developers.com/showthread.php?t=1730954
That's really weird that your getting those errors. We don't use emmc or external_sd. Heimdall will get you set back up but I've never seen ANYONE in all the time I have had this phone report that error. That's why I was trying to make sure you had the right phone and ROM before you went any further.
now what?
hechoen said:
That's really weird that your getting those errors. We don't use emmc or external_sd. Heimdall will get you set back up but I've never seen ANYONE in all the time I have had this phone report that error. That's why I was trying to make sure you had the right phone and ROM before you went any further.
Click to expand...
Click to collapse
Ok so im back onto stock 2.3.6 and rooted... what kernel do i install? oh yea and hermdal doesnt want to work something net framework isnt installing (keeps on failing) and ive tried downloading it from microsoft too
Well, since antons didn't seem to work for you, flash the other one. lol
http://forum.xda-developers.com/showthread.php?t=1828171
-
how do i go from stock to mtd rom? (im on the "other one" i have a 32 gig sd card with EVERY single rom on that list, every kernel, every modem so basicly i dont have to download them)
before i just installed it through cmr but is that right?
I want to go from stock to cyanogen mod 9 MTD
Im creating a backup right now incase i mess up later
That's will work as long as the recovery is CWM 5.x or later. You used to have to flash CM7 first but I'm pretty sure Team Acid fixed it in the new CM9 build. Just check the MD5 of that zip you where trying to flash. Those errors are very strange and I'm thinking you might have accidentally gotten the wrong CM9.
hechoen said:
That's will work as long as the recovery is CWM 5.x or later. You used to have to flash CM7 first but I'm pretty sure Team Acid fixed it in the new CM9 build. Just check the MD5 of that zip you where trying to flash. Those errors are very strange and I'm thinking you might have accidentally gotten the wrong CM9.
Click to expand...
Click to collapse
Ok im installing..
Also if this works can i just restore my cm10 backup? or do i have to install cm 10 then the backup?
You can try to restore it. If it's the same version of CWM that you backed up from it should work. Just do all the wipes including system and data before you restore. If that doesn't work for some reason just flash CM10 than do an advanced restore of data only.
Works
ok it works... cid kinda scares me
I guess im going to restore my cm10 backup then...
And thanks for all the help
wow i have to wait five minutes between posts that sucks
restore
got an err when trying to restore E:/format_volume: format_rfs_decive failed on system
Guess im going to install cm10 then restore
What an exciting day... i went from froyo to gingerbread to ics and now to jb
Ahh
Ok so i found out that when i flashed kc1 to kc6 on odin i left the repartiton checked... so some files were missing and i guess that was the problem... what is phone efs clear on odin again? isnt it have to do with something with celluar communications
ok everything is back to normal (except a few apps) And thanks for helping out!
Some apps don't restore. Like xda for example. If I restore a backup it will say app not installed. When I reDL it from Play all my settings are still there though. So it's saving the cache and not the app. I've never really cared enough to look into it. lol
I Flashed derefas built Sense 4.0a Bulid#7 lite last night, it didn't boot and got stuck at beat audio screen. Tried nearly ten times, flashed two versions of TWRP and even latest CWM6. Then for a cross check booted CM10, even that gets stuck at cynogenmod boot animation.
Tried "fastboot flash boot boot.img" even, for flashing the kernel separately which i came to know via XDA forums, even then no use.
Bootloader Unlocked, S-ON.
SD Card: 8GB Class 4, even changed SD Cards and SD-Ext types ext2,3,4.
Not overclocked even once.
Is the phone's final destination is to some garbage after this(hard-bricked) or what?
easygo:) said:
I Flashed derefas built Sense 4.0a Bulid#7 lite last night, it didn't boot and got stuck at beat audio screen. Tried nearly ten times, flashed two versions of TWRP and even latest CWM6. Then for a cross check booted CM10, even that gets stuck at cynogenmod boot animation.
Tried "fastboot flash boot boot.img" even, for flashing the kernel separately which i came to know via XDA forums, even then no use.
Bootloader Unlocked, S-ON.
SD Card: 8GB Class 4, even changed SD Cards and SD-Ext types ext2,3,4.
Not overclocked even once.
Is the phone's final destination is to some garbage after this(hard-bricked) or what?
Click to expand...
Click to collapse
Have you tried doing a FACTORY RESET. If not, no ROM will ever boot on your phone. Either do this from your recovery or HBOOT.
easygo:) said:
I Flashed derefas built Sense 4.0a Bulid#7 lite last night, it didn't boot and got stuck at beat audio screen. Tried nearly ten times, flashed two versions of TWRP and even latest CWM6. Then for a cross check booted CM10, even that gets stuck at cynogenmod boot animation.
Tried "fastboot flash boot boot.img" even, for flashing the kernel separately which i came to know via XDA forums, even then no use.
Bootloader Unlocked, S-ON.
SD Card: 8GB Class 4, even changed SD Cards and SD-Ext types ext2,3,4.
Not overclocked even once.
Is the phone's final destination is to some garbage after this(hard-bricked) or what?
Click to expand...
Click to collapse
well heres a story for you, i obviously have a HTC Explorer (pico) and so does my partner (bought at the same time same place), so i flashed my phone with Sense4.0a Build#7, rebooted afew times but worked fine (all features everything) so then i followed same procedure to flash other pico (she loves sense) and yet it has same results as yours (sometimes got to the homescreen) and some others on the forum, make a logcat of sense rom through adb..........your phone is not bricked.........clean all phone wipe the lot and reflash cyanogen rom, should be fine...............
Re: [Help] [Q] No ROM boots! Phone stuck on boot animation of custom rom.
Same problem in my phone but i am re create sdext part..rom is working
Sent from my HTC Explorer using xda premium
Re: [Help] [Q] No ROM boots! Phone stuck on boot animation of custom rom.
My explorer can't run any oc kernel, don't know why. while my friend explorer supports .is it problem of hardware??
I always ended up burning my nand.build #7 also contain oc kernel I think.
after waiting for 15 min I flashed cm9, I came to know that I burnt my nand as I got fc's
LiVeRpOoL-FaN said:
well heres a story for you, i obviously have a HTC Explorer (pico) and so does my partner (bought at the same time same place), so i flashed my phone with Sense4.0a Build#7, rebooted afew times but worked fine (all features everything) so then i followed same procedure to flash other pico (she loves sense) and yet it has same results as yours (sometimes got to the homescreen) and some others on the forum, make a logcat of sense rom through adb..........your phone is not bricked.........clean all phone wipe the lot and reflash cyanogen rom, should be fine...............
Click to expand...
Click to collapse
Actually, I tried GB Sense based ROMs too, its stuck at HTC initial screen itself. No other rom boots either. How to take logcat? I read a common tutorial and did, but the terminal said as device not found like that. If u've tutorial pls post!
I've not tried O.C so far on my device.
I too facing the same problem after installing latest build..stuck on htc screen..after that i tried restoring my old mini c9 rom..cant get get past the htc screen
i faced same problem when trying to install ruu with different radio version...
even i was unable to boot into recovery...so i flashed a custom recovery through bootloader...wiped everything and installed a new custom rom
^^ so u fixed it or what..can u please elaborate what you did..
:crying:
:crying: same problem wid me bro nw wat to do..... plz helpp...
help
easygo:) said:
I Flashed derefas built Sense 4.0a Bulid#7 lite last night, it didn't boot and got stuck at beat audio screen. Tried nearly ten times, flashed two versions of TWRP and even latest CWM6. Then for a cross check booted CM10, even that gets stuck at cynogenmod boot animation.
Tried "fastboot flash boot boot.img" even, for flashing the kernel separately which i came to know via XDA forums, even then no use.
Bootloader Unlocked, S-ON.
SD Card: 8GB Class 4, even changed SD Cards and SD-Ext types ext2,3,4.
Not overclocked even once.
Is the phone's final destination is to some garbage after this(hard-bricked) or what?
Click to expand...
Click to collapse
hey bro nw how to get our cell to normal bcoz same as happend wid me:crying:
Try cute prince nand erase method.
Install sense (gb) like ateeq Rom then follow here
http://forum.xda-developers.com/showthread.php?p=37805882
Scroll down and see there is a topic named 'Recovering from an oc nand wipe'.
Then try flashing cm rom..
9282gkg said:
hey bro nw how to get our cell to normal bcoz same as happend wid me:crying:
Click to expand...
Click to collapse
I went on to Flash RUU and got stuck at htc logo with four warning symbols /!\, hope thats the end of my phone.
Edit: As far as helps, I dont think no one(including devs) would coming to help us! We're totally !!!!
same problem
i have same problem. i tried flash RUU but now, my phone's screen is black with 4 triangles in corner.
Here is a simple solution
If u can go to recovery
Wipe everything ( by mounting system , data ,cache etc )
Wipe dalvik cache
Then reboot into recovery again
And again wipe everything
( this will clear ur phone problems and will clean the phone )
Now I recommend to flash cm9.1
And that's it u got ur working phone again
sent from Apex Rom Series ( aokp )
ok guys you need to unlock bootloaders again i guess because flashing RUU locks the bootloaders....flash a new recovery of your choice CWM/TWRP Wipe system,boot,dalvik cache,cache and last factory rest and flash a rom like CM9/MiniCM9/CM10/CM10.1 and reboot and make sure your ext2/3/4 partition in sd card is properly formatted before you flash a new rom and after flashing wait for 10 min atleast
---------- Post added at 08:46 PM ---------- Previous post was at 08:44 PM ----------
WARNING never flash RUU in any case because you never know what may happen !!
easygo:) said:
I went on to Flash RUU and got stuck at htc logo with four warning symbols /!\, hope thats the end of my phone.
Edit: As far as helps, I dont think no one(including devs) would coming to help us! We're totally !!!!
Click to expand...
Click to collapse
If you locked the bootloader unlock it, flash custom recovery like TWRP like you did initially. Boot to recovery, flash any rom, choose something stable I suggest flash cm9 build 11 then flash gapps, but remember before flashing rom wipe dalvik cache, factory reset, wipe system, reboot phone if still doesn't boots and you get something weird flash another ruu, choose the right ruu for your country, lock bootloader flash ruu repeat from start if everything works hit thanks keep pressing it lol.
If it doesn't make a video to explain what is happening, but don't worry don't loose hope
Sent from my HTC Explorer A310e using xda premium
DanceOff said:
If you locked the bootloader unlock it, flash custom recovery like TWRP like you did initially. Boot to recovery, flash any rom, choose something stable I suggest flash cm9 build 11 then flash gapps, but remember before flashing rom wipe dalvik cache, factory reset, wipe system, reboot phone if still doesn't boots and you get something weird flash another ruu, choose the right ruu for your country, lock bootloader flash ruu repeat from start if everything works hit thanks keep pressing it lol.
If it doesn't make a video to explain what is happening, but don't worry don't loose hope
Sent from my HTC Explorer A310e using xda premium
Click to expand...
Click to collapse
Htc phones never bricks
There r always many solution
sent from Apex Rom Series ( aokp )
Bro phone is stuck on boot animation so cnt use that method if der is anther methd dan plz help
Sent from my GT-I9082 using xda premium
Clean everything install twrp 2.4.0.1 , mount everything and install cm 9.1
Sent from my HTC Explorer A310e using xda app-developers app
1 - i apologies in edvense for my multi post, i cant post in the relevant tread until i have 10 posts
2 - and for my poor English and horrendous spelling errors
i have a p500h (OldBB)
using "arnab321-Tasssadar-MultiROMMgr-v5.1" i dual boot
wen the story start i have CWM Recovery v5.0.2.0 CM10.2 on internal and CM7.2 on sd-ext
first i flashed mukulsoni`s flashable CWM Recovery v6.0.4.6
booted to CM10.2, works fine
booted to CM7.2, works too :laugh:
No, this recovery for KitKat only, as you must be aware that KitKat ROM flash on "Set_Metadata_Recursive" and all previous JB and others were using SET_PERM_RECURSIVE.
The update can take backup and restoration of sdext, which was disabled in previous one. Enjoy....
Click to expand...
Click to collapse
stage 2 installing CM11
i installed CM11
installed arnab321-Tasssadar multi rom
i had to restore my sd-ext partition, it was formatted during the CM11 install
and rebooted to CM7.2
still working
next test will be installing CM7.2 on the internal and see if its somting speceal in the rom i use or the arnab321-Tasssadar multi rom
road block
i cant flase the cm7.2 rom i get an error
format() expects 5 args got 3
and wen i try to flash CWM Recovery 5.0.2.0 i get install abortend
from log
I:Cant`t partition non-vfat: /storage/sdcard0 (vfat)
ill try using an app
end
i used an app to get back to 5.0.2.0
flashed my CM7.2 rom
flashed 6.0.4.6
boot
and CM7.2 runs
next try: slimrom v1.3-oldBB (an old rom from rec v4 days)
cant flash inn 6.0.4.6 "format() expects 5 args got 3" error
using an app to got back to recovery 5.0.2.0
flasing the slimrom
flasing 6.0.4.6
boot
slimrom runs whit no problem
my congloson: ther is no problem booting to old android like 2.3.7 (didnt test ICS and JB but i think thy will boot to)
the only problem is in the install scrips
the old probably wont get an updated scrips but ther is still work on 2.3.7 roms that mite get install scripts that can work in 6.0.4.6
that 4 postes 6 more to go
p.s.
i use a 2.3.7 rom called nexusme-kitkat
i understand it has some paid apps in it
can any on tell me wat thy are id like to pay for them
and id like to know what camera is in ther
thank for any help