Database Info

[Q] TF101 Won't connect via USB

I'm quite confused with this one. Here's what's happened so far.
I was on AOKP Build 31 with CWM touch 5.8.2.1 and decided I want to go back to stock and start fresh. I found a mostly stock 9.2.1.17 from a thread in XDA titled "[ROM] TF101 Rooted Stock 9.2.1.17 + bootloader + modded recovery US and WW" (sorry, can't post links). I downloaded, checked the MD5, made a nandroid, wiped data/cache/Dalvik and installed the ROM. After doing that, I have been unable to get my device to connect to any computer via USB. I tried restoring my backup and also re-flashing a fresh copy of AOKP Build 31. I am able, however, to connect via ADB using TCP/IP. When I plug the device into my Windows 7 Pro, 64-bit I don't get any sort of notification or sound. When I plug the device into my Ubuntu 11.10, 64 bit I also don't have a connection showing up using the 'sudo lsusb' command. The strangest thing is that when I plug the device in the screen turns on, so clearly the USB cable is not the cause. I've tried two different Win. 7 computers, my Ubuntu box and a Fedora box (and multiple USB ports on each computer). Any suggestions?

Try this, Settings> Storage> hit the 3 dots sign at top right corner, hit USB computer connection,
Un check the MTP box and check it again. If that don't work try turning off USB debugging

Try this, Settings> Storage> hit the 3 dots sign at top right corner, hit USB computer connection,
Un check the MTP box and check it again. If that don't work try turning off USB debugging
Click to expand...
Click to collapse
Tried that on one of the Win. 7 boxes and the Ubuntu box, no success.

Have you tried reinstalling the drivers? I had to do that when I went from stock to custom rom.

This happens a lot. Something to do with the bootloader not getting flashed properly or something.
Get the full ICS ROM from Asus website and flash it.

horndroid said:
This happens a lot. Something to do with the bootloader not getting flashed properly or something.
Get the full ICS ROM from Asus website and flash it.
Click to expand...
Click to collapse
Just did that... lost root -.- stock and no usb >:/
Does anyone have any ide how i can root it now?

Get the full ICS ROM from Asus website and flash it.
Click to expand...
Click to collapse
I also tried doing this, without success. I'll try a few other things, thanks for the help though all!

You can root it (rather painfully and obscurely) by using an update.zip with the version of the firmware Razorclaw needs to work, and root in tablet and then flash in tablet. Downgrading to the required honeycomb might fix the usb too. I've never had to use ADB to do anything on my tf, aside from developing

Thing O Doom said:
You can root it (rather painfully and obscurely) by using an update.zip with the version of the firmware Razorclaw needs to work, and root in tablet and then flash in tablet. Downgrading to the required honeycomb might fix the usb too. I've never had to use ADB to do anything on my tf, aside from developing
Click to expand...
Click to collapse
How can i downgrade to honeycomb? without recovery?? and where can i find the ww version of it?

baseballfanz said:
Try this, Settings> Storage> hit the 3 dots sign at top right corner, hit USB computer connection,
Un check the MTP box and check it again. If that don't work try turning off USB debugging
Click to expand...
Click to collapse
Ive rooted a bajillion devioces and never thought to look there when my tf101 stopped connecting, ive rebooted my pc and it a hundred times
Thanks for the DOH! moment !!

ASUS TF300TG not detect USB Cable for data but charge is ok

hi 2 all
ASUS TF300TG stick in asus logo after rooting and not detect USB Cable for data by computer and just charge is ok.
no fastboot no recovery...no Power+VolDown...plz help to solve this

pc_helper said:
hi 2 all
ASUS TF300TG stick in asus logo after rooting and not detect USB Cable for data by computer and just charge is ok.
no fastboot no recovery...no Power+VolDown...plz help to solve this
Click to expand...
Click to collapse
It will be good to tell more about your root.
How do you root ?
Which guide have you use ?
Which version of your TG ? before the root?
etc, more infos will be good for a good help

ASUS tf300t fix root permissions error
this was the best place i could think to post this.
I can see that you are somewhat versed with my series of tablet so im hoping maybe you can help me.
I previously had rooted my device and did so pretty easily (fastboot flash CWM-Touch, root-signed.zip) yadda yadda.
Then I deciced i wanted to install CM 9.1(stable)[or so it said]
Downloaded the build onto sd card, wiped my caches and data and all that...CWM install .zip,(good), reboot, stuck at inital cold-boot screen with ASUS and TEGRA powered by NVIDIA logos.
Found a solution to that problem @ transformerforums.com- did a fastboot: flash system blob w/original JB OTA build (took forever, i even thought it froze my computer) i had to download from the asus support site and got the tablet up and running again....BUT, and this is the kicker, no root. I tried using CWM-touch to reinstall root-signed.zip, successful. Hit reboot and CWM popped up with your user su binary may be damaged. Repair? yes. Reboots fine, but then i tried to access a program that needed root, ERROR! IS DEVICE ROOTED? pops up... I checked my /system/xbin/su. still there but couldnt do anything with it...
ANY SUGGESTIONS TO HELP WOULD BE AWESOME. This isn't the first device ive cracked so im not exactly new but dont know enough about this to try fix anymore than what ive done and ive searched the forums over for the past four days and cant find anyone or anything that is similar to whatim experiencing...
please help.
Sincerely, SIK
P.S.-DONT USE CWM-TOUCH V6.0.3 ON THIS TABLET. YOU CANT MAKE RECOVERIES!!! IT SAYS IT DOES BUT DOESNT BUILD ANYTHING!
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app

TF300TG
philos64 said:
It will be good to tell more about your root.
How do you root ?
Which guide have you use ?
Which version of your TG ? before the root?
etc, more infos will be good for a good help
Click to expand...
Click to collapse
i dont know about root version,just i know that user attempt to root this device but not success,i am good about installing Official rom or custom rom on asus tf300tg but just problem is USB for data mode not define by cumputer & not working for fastboot & just work for charging,plz help

[Q] TF101 not recognized by PC (Windows 7/8 x64)

OK. First of all, although I'm using the TF101 for the first time, I'd like to say that I've done a fair bit of rooting, troubleshooting and customizing various Android devices (HD2, Desire, SE x10, SGS2, SGSN, SGSN2...). So I ensure you, any lack of knowledge regarding the TF101 is not caused by ignorance. I'm trying to find out the cause for my problem for few days now, but can't find something to catch on. There are many similar problems with TF101 not being recognized by PC, but they all offer solutions which don't work, I don't understand them, or which make no sense.
Let's start at the beginning.
I have gotten my hands on Asus EEE Pad Transformer TF101. It was really cheap. I was told it came form USA.
It's obviously rooted, has a custom rom and recovery (ClockworkMod Recovery v3.2.0.1. roach2010-tf101-r1)
This is waht it says in Settings>About:
Model Number:
Transformer TF101G (although I think it is actually just a Wi-Fi model - TF101, it has no SIM slot)
Android version:
3.2.1
Baseband version:
Unknown
GPS version:
V5.5.8
Wi-Fi version:
V5.2.65
Bluetooth version
v6.24
Kernel version:
2.6.36.4-g6aa10ba
[email protected] #20111023
Build number
HTK75.prime_epad-2.1.0-20111105
Mobile Dock version:
Not available​
It seems to be working fine, except for being totally filled up with apps, bloatware and data. Natural instinct was to install a clean ROM. I wanted to go with CM, and a newer Recovery, but I got stuck on the first step. I can't get it recognized on any of my computers. Both Windows 7 and 8.
However I plug it in, I get; USB device not recognized. One of the USB devices attached to you computer has malfunctioned... This happens when I connect the USB cable when Android is booted up, when in recovery and also in APX mode, providing I have entered it (I'm not really sure because the display is always black).
In Device Manager, I can see only one exclamation icon (I did enable show hidden devices) in Universal Serious Bus Controllers called Unknown Device, which seems to be from the TF101. I tried uninstalling it. Restarting both the tablet and the computers. I tried to manually override those Unknown Device drivers with ASUS Android USB drivers for Windows and Universal_Naked_Driver_0.72 and ventana apx driver, but it wouldn't take any of them. I also tried installing them manually by right clicking on the INF files, and still nothing.
Then I thought I could mount the sdcard or USB mode in recovery, but that wouldn't work either.
Any solutions?

Do you have the stock USB cable? Are you plugging in to a usb3 slot?
Does the rom have fast charge enabled? I think that's what it's called but it allows USB charge rather than seeing your files and such.
Do you have mtp mode or mass storage mode options on the tablet?
Sent from my SGH-T999 using Tapatalk 2

Yes, I have stock USB cable. At least I think so. I'm not the first owner. How can I be sure? It seems to be charging fine on the wall charger. It doesn't charge thru PC though.
If you are asking me if I tried it on USB 3.0; yes I did. Both 2.0 and 3.0. Not recognized.
I don't know if the ROM has "fast charge". I'm new to the TF101, and Honeycomb in general, and I didn't notice such an option. Where can I look?
I also didn't see any MTP/Mass storage modes in settings. Where would they be?

estugarda said:
Yes, I have stock USB cable. At least I think so. I'm not the first owner. How can I be sure? It seems to be charging fine on the wall charger. It doesn't charge thru PC though.
If you are asking me if I tried it on USB 3.0; yes I did. Both 2.0 and 3.0. Not recognized.
I don't know if the ROM has "fast charge". I'm new to the TF101, and Honeycomb in general, and I didn't notice such an option. Where can I look?
I also didn't see any MTP/Mass storage modes in settings. Where would they be?
Click to expand...
Click to collapse
Lol I don't know on honeycomb. It's been a long time but these threads are filled with fast charge and the other issue as well. Do some more searches it's bound to give you something.
Sent from my SGH-T999 using Tapatalk 2

TomTcom said:
Lol I don't know on honeycomb. It's been a long time but these threads are filled with fast charge and the other issue as well. Do some more searches it's bound to give you something.
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
I did look around. I read a ton of posts here and elsewhere. There is nothing to the point. People at transformer forums are actually advising to just forget about the usb and use wireless transfer instead, since there are so many people with this problem who can't solve it. That would be fine with me, but I'm especially stuck because I can't flash anything since my USB connection is not working, and current CWM recovery doesn't seem to support flashing from internal memory/sd card.

Before you do anything else, install TWRP recovery before you brick your TF with CWM
Install Goo Manager here
https://play.google.com/store/apps/details?id=com.s0up.goomanager
Tap the menu dots at the top right of the app and choose "Install OpenRecoveryScript"
That should flash the latest TWRP recovery for you

estugarda said:
OK. First of all, although I'm using the TF101 for the first time, I'd like to say that I've done a fair bit of rooting, troubleshooting and customizing various Android devices (HD2, Desire, SE x10, SGS2, SGSN, SGSN2...). So I ensure you, any lack of knowledge regarding the TF101 is not caused by ignorance. I'm trying to find out the cause for my problem for few days now, but can't find something to catch on. There are many similar problems with TF101 not being recognized by PC, but they all offer solutions which don't work, I don't understand them, or which make no sense.
Let's start at the beginning.
I have gotten my hands on Asus EEE Pad Transformer TF101. It was really cheap. I was told it came form USA.
It's obviously rooted, has a custom rom and recovery (ClockworkMod Recovery v3.2.0.1. roach2010-tf101-r1)
This is waht it says in Settings>About:
Model Number:
Transformer TF101G (although I think it is actually just a Wi-Fi model - TF101, it has no SIM slot)
Android version:
3.2.1
Baseband version:
Unknown
GPS version:
V5.5.8
Wi-Fi version:
V5.2.65
Bluetooth version
v6.24
Kernel version:
2.6.36.4-g6aa10ba
[email protected] #20111023
Build number
HTK75.prime_epad-2.1.0-20111105
Mobile Dock version:
Not available​
It seems to be working fine, except for being totally filled up with apps, bloatware and data. Natural instinct was to install a clean ROM. I wanted to go with CM, and a newer Recovery, but I got stuck on the first step. I can't get it recognized on any of my computers. Both Windows 7 and 8.
However I plug it in, I get; USB device not recognized. One of the USB devices attached to you computer has malfunctioned... This happens when I connect the USB cable when Android is booted up, when in recovery and also in APX mode, providing I have entered it (I'm not really sure because the display is always black).
In Device Manager, I can see only one exclamation icon (I did enable show hidden devices) in Universal Serious Bus Controllers called Unknown Device, which seems to be from the TF101. I tried uninstalling it. Restarting both the tablet and the computers. I tried to manually override those Unknown Device drivers with ASUS Android USB drivers for Windows and Universal_Naked_Driver_0.72 and ventana apx driver, but it wouldn't take any of them. I also tried installing them manually by right clicking on the INF files, and still nothing.
Then I thought I could mount the sdcard or USB mode in recovery, but that wouldn't work either.
Any solutions?
Click to expand...
Click to collapse
Are those drivers signed? I know 7 will reject an unsigned driver for security reasons.
Nexus 4 CyanogenMod 10.1.0RC2
---------- Post added at 02:04 PM ---------- Previous post was at 02:01 PM ----------
estugarda said:
Yes, I have stock USB cable. At least I think so. I'm not the first owner. How can I be sure? It seems to be charging fine on the wall charger. It doesn't charge thru PC though.
If you are asking me if I tried it on USB 3.0; yes I did. Both 2.0 and 3.0. Not recognized.
I don't know if the ROM has "fast charge". I'm new to the TF101, and Honeycomb in general, and I didn't notice such an option. Where can I look?
I also didn't see any MTP/Mass storage modes in settings. Where would they be?
Click to expand...
Click to collapse
It should be somewhere in "storage" in settings.
Nexus 4 CyanogenMod 10.1.0RC2

Here you go hope it helps
Nexus 4 CyanogenMod 10.1.0RC2

*Detection* said:
Before you do anything else, install TWRP recovery before you brick your TF with CWM
Install Goo Manager here
https://play.google.com/store/apps/details?id=com.s0up.goomanager
Tap the menu dots at the top right of the app and choose "Install OpenRecoveryScript"
That should flash the latest TWRP recovery for you
Click to expand...
Click to collapse
Unfortunately, GO Manager wouldn't install OpenRecoveryScript. It says something along the lines of "No Recoveries were found for your device..."
ryaniskira said:
Are those drivers signed? I know 7 will reject an unsigned driver for security reasons.
Those from Asus websites are signed 100%.
Nexus 4 CyanogenMod 10.1.0RC2
Click to expand...
Click to collapse

estugarda said:
Unfortunately, GO Manager wouldn't install OpenRecoveryScript. It says something along the lines of "No Recoveries were found for your device..."
Click to expand...
Click to collapse
You might need to update to ICS first then, maybe Honeycomb is too old
CWM has a habit of boot looping devices, I would try updating to an ICS ROM and then trying Goo again before going for a Jellybean ROM
EDIT - You might have more luck getting TWRP installed using Easyflasher
http://forum.xda-developers.com/showthread.php?t=1688012

In the same boat
estugarda said:
OK. First of all, although I'm using the TF101 for the first time, I'd like to say that I've done a fair bit of rooting, troubleshooting and customizing various Android devices (HD2, Desire, SE x10, SGS2, SGSN, SGSN2...). So I ensure you, any lack of knowledge regarding the TF101 is not caused by ignorance. I'm trying to find out the cause for my problem for few days now, but can't find something to catch on. There are many similar problems with TF101 not being recognized by PC, but they all offer solutions which don't work, I don't understand them, or which make no sense.
Let's start at the beginning.
I have gotten my hands on Asus EEE Pad Transformer TF101. It was really cheap. I was told it came form USA.
It's obviously rooted, has a custom rom and recovery (ClockworkMod Recovery v3.2.0.1. roach2010-tf101-r1)
This is waht it says in Settings>About:
Model Number:
Transformer TF101G (although I think it is actually just a Wi-Fi model - TF101, it has no SIM slot)
Android version:
3.2.1
Baseband version:
Unknown
GPS version:
V5.5.8
Wi-Fi version:
V5.2.65
Bluetooth version
v6.24
Kernel version:
2.6.36.4-g6aa10ba
[email protected] #20111023
Build number
HTK75.prime_epad-2.1.0-20111105
Mobile Dock version:
Not available​
It seems to be working fine, except for being totally filled up with apps, bloatware and data. Natural instinct was to install a clean ROM. I wanted to go with CM, and a newer Recovery, but I got stuck on the first step. I can't get it recognized on any of my computers. Both Windows 7 and 8.
However I plug it in, I get; USB device not recognized. One of the USB devices attached to you computer has malfunctioned... This happens when I connect the USB cable when Android is booted up, when in recovery and also in APX mode, providing I have entered it (I'm not really sure because the display is always black).
In Device Manager, I can see only one exclamation icon (I did enable show hidden devices) in Universal Serious Bus Controllers called Unknown Device, which seems to be from the TF101. I tried uninstalling it. Restarting both the tablet and the computers. I tried to manually override those Unknown Device drivers with ASUS Android USB drivers for Windows and Universal_Naked_Driver_0.72 and ventana apx driver, but it wouldn't take any of them. I also tried installing them manually by right clicking on the INF files, and still nothing.
Then I thought I could mount the sdcard or USB mode in recovery, but that wouldn't work either.
Any solutions?
Click to expand...
Click to collapse
Have exhausted all resources all so if you find out anything please pm me. In the mean time I am still looking and I will keep you posted if I find out anything.

philseven said:
Have exhausted all resources all so if you find out anything please pm me. In the mean time I am still looking and I will keep you posted if I find out anything.
Click to expand...
Click to collapse
My guess is a bad USB cable. I had my USB cable stop working for ADB/APX/MTP/PTP but it still works with the Asus wall wart for charging. New USB cable fixed it straight away.

Solution
hi. if you cannot enter apx mode. try flashing a new rom of the tf101 or reflashing your current recovery

Soft brick Asus transformer tf101,None boot stuck\no USB
Hello I'm having the same problem with my tf101 but I can't get windows 7 64bit too load a driver for it, tried them all? Mine is soft bricked and there's no recovery file to restore. getting file not found.
Only shows CMW Based recovery v 5.5.0.4 roach-tf101-r2, also won't see SD card to re flash a rom or recovery.img, seems everywhere I turn I hit a wall on getting it back to working again, just hangs on Asus Logo?
please help? do I need to use a terminal program? is there a way to force a driver to load and see it long enough to reimage?
Thanks tons for any help.:crying:

rmontgo3Denver said:
Hello I'm having the same problem with my tf101 but I can't get windows 7 64bit too load a driver for it, tried them all? Mine is soft bricked and there's no recovery file to restore. getting file not found.
Only shows CMW Based recovery v 5.5.0.4 roach-tf101-r2, also won't see SD card to re flash a rom or recovery.img, seems everywhere I turn I hit a wall on getting it back to working again, just hangs on Asus Logo?
please help? do I need to use a terminal program? is there a way to force a driver to load and see it long enough to reimage?
Thanks tons for any help.:crying:
Click to expand...
Click to collapse
Same problem here... Tried Naked Driver and still got nothing. The Tablet just won't get recognized by the computer (Windows 8.1).
Did you have any luck unbricking it?
I've been through soft bricks before but this time, it seems to me that I've hit the bottom... I just can't think of anything else... any help??

had this problem for 2 years now. started off off like that, now it doesnt recognize at all. if it's rooted, flash a recovery using a terminal emulator. (there are instructions on team win's website on how to flash it to the appropriate block). then, just install a ROM with twrp. mine is in a permaloop. wiping data, rebooting, doing it again. if you get it to work, don't tinker with it any more. that's from my experience.
Sent from my LG-LG870 using Xparent Blue Tapatalk 2

tf101
hi, my asus tf101 has a same issue,my laptop don't recognized my asus,i dont know if the problem is in the cable or what,.i tried already what i saw in youtube but nothing happen.,the sdcard slot is not working,i used cwm v5.8.1.8 touch ,.but i want to change it into original stock version..now ,im working on how my device will recognize...is there a solution to bringback the original recovery base without using computer?..thank you..
---------- Post added at 03:08 PM ---------- Previous post was at 03:04 PM ----------
fabioporto said:
Same problem here... Tried Naked Driver and still got nothing. The Tablet just won't get recognized by the computer (Windows 8.1).
Did you have any luck unbricking it?
I've been through soft bricks before but this time, it seems to me that I've hit the bottom... I just can't think of anything else... any help??
Click to expand...
Click to collapse
got a same issue here,with my asus tf101,i regret to changed my recovery base into cwm touch v5.8.1.8.. it didn't show my ext sdcard file to change it again..i want to bring back the old one..but i don't know how..please please please..need help..
---------- Post added at 03:13 PM ---------- Previous post was at 03:08 PM ----------
James130201 said:
hi. if you cannot enter apx mode. try flashing a new rom of the tf101 or reflashing your current recovery
Click to expand...
Click to collapse
hi sir,..i have the same problem above,.my data cable doesn't work ..the cwm i used now doesn't show my ext sd card,.only clockworkmod file,.is it possible to flash the old rom without computer?..how..please reply ,..thanks,

Don't wanna be the bearer of bad news but, I gave up trying to recover that thing a long time ago buddy. My advise to you would be: let go of it. The way I see it, the only way you could do it would be if you could replace the connection port and regain access to you tablet through you computer - considering the problem is being caused by that port.
Another way of doing that would be if you could actually have access to the tablet's internal storage and then place a ROM there so you could flash that using CWM.
Those are the only two options I didn't try, and now I can't, since I gave mine away to someone I thought could try one of those things, but not even an eager 17 year old boy could do it.
So, good luck with that.

USB not recognized + no Recovery

Hi All,
It has been a time that I unlocked my TF700t then followed the CM10 documentation to install 10.0 using CWM.
Recently I wanted to upgrade to 10.1 but it didn't work and ended with my tablet rebooting undefinitely.
I reverted then to install back the ASUS stock Rom from their website :
- I downloaded the file
- unzipped it (since it contains another zip)
- put it on a micro SD
- Booted into CWM
- installed the zip
I ended with a working tablet on the stock rom JB 4.1 but know I wanted to try again CM but I cannot access recovery anymore. I can access the bootloader but when I select RCK I get the droid laying on his back with the warning sign.
I thought I would need to flash another recovery (TWRP or other) using fastboot but now when I plug the tablet to my PC it keeps telling me that the device is not recognized. I tried to install the USB driver but it doesn't get detected.
Can anyone please help ? The tablet is working but I am afraid that it has lost some of its capabilities.
Thanks
Nacef

nacef_l said:
Hi All,
It has been a time that I unlocked my TF700t then followed the CM10 documentation to install 10.0 using CWM.
Recently I wanted to upgrade to 10.1 but it didn't work and ended with my tablet rebooting undefinitely.
I reverted then to install back the ASUS stock Rom from their website :
- I downloaded the file
- unzipped it (since it contains another zip)
- put it on a micro SD
- Booted into CWM
- installed the zip
I ended with a working tablet on the stock rom JB 4.1 but know I wanted to try again CM but I cannot access recovery anymore. I can access the bootloader but when I select RCK I get the droid laying on his back with the warning sign.
I thought I would need to flash another recovery (TWRP or other) using fastboot but now when I plug the tablet to my PC it keeps telling me that the device is not recognized. I tried to install the USB driver but it doesn't get detected.
Can anyone please help ? The tablet is working but I am afraid that it has lost some of its capabilities.
Thanks
Nacef
Click to expand...
Click to collapse
Go to your system setting and select storage. Click the 3 dots in the upper right corner and tick the box which is Media device (MTP).. Good luck..

LetMeKnow said:
Go to your system setting and select storage. Click the 3 dots in the upper right corner and tick the box which is Media device (MTP).. Good luck..
Click to expand...
Click to collapse
I just tried that but it did not work, windows is still displaying USB device not recognized.

nacef_l said:
I just tried that but it did not work, windows is still displaying USB device not recognized.
Click to expand...
Click to collapse
What Windows version are you running?
You may have to uninstall the drivers for your MTP device before installing new ones as well as disabling Windows to automatically install drivers for a new device, then manually point it to the Universal Naked Drivers folder.
Or downlaod Android SDK tool ad through it the Platform Tools and USB drivers.
BTW: When you flashed the stock firmware you lost your custom recovery. That's why you see the dead Droid - it's the stock recovery.
If you can't get fastboot to work you can use Motochopper to root your JB 4.1 stock firmware and then GooManager to install the latest TWRP recovery.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 4

I have tested it on WinXP, Win7, Ubuntu and another box with Win XP. Always same thing the device is not recognized.
When I try to update the driver and point it manually to the naked drivers it cannot detect them.
I guess that even for running Motochopper I will need to get USB working to be able to root my device.
Any help please ? I am stuck with a sluggish stock mod that buries the perfs of my device.

nacef_l said:
I have tested it on WinXP, Win7, Ubuntu and another box with Win XP. Always same thing the device is not recognized.
When I try to update the driver and point it manually to the naked drivers it cannot detect them.
I guess that even for running Motochopper I will need to get USB working to be able to root my device.
Any help please ? I am stuck with a sluggish stock mod that buries the perfs of my device.
Click to expand...
Click to collapse
You do have USB debugging enabled in the Developer settings, do you?
Sent from my DROID4 using Tapatalk 2

berndblb said:
You do have USB debugging enabled in the Developer settings, do you?
Sent from my DROID4 using Tapatalk 2
Click to expand...
Click to collapse
Yes checked and double checked that

nacef_l said:
Yes checked and double checked that
Click to expand...
Click to collapse
Then it's a driver problem and it's solvable. What do you see in Device Manager under Portable Devices with your tablet connected? Did you uninstall the driver and re-install it?
Did you try to install Asus Sync (which should give you compatible drivers for the TF700)?
So many driver problems lately... there's got to be a pattern to it, but what it may be beats me :what:
Sent from my ASUS Transformer Pad TF700T using Tapatalk 4

berndblb said:
Then it's a driver problem and it's solvable. What do you see in Device Manager under Portable Devices with your tablet connected? Did you uninstall the driver and re-install it?
Did you try to install Asus Sync (which should give you compatible drivers for the TF700)?
So many driver problems lately... there's got to be a pattern to it, but what it may be beats me :what:
Sent from my ASUS Transformer Pad TF700T using Tapatalk 4
Click to expand...
Click to collapse
In the Device Manager I have nothing under Portable Devices, but under USB devices it appears an Unrecognized USB Device and a bubble notifying about an unrecognized USB device keeps popping in the task bar. Even after installing ASUS Sync it is not detected.

nacef_l said:
In the Device Manager I have nothing under Portable Devices, but under USB devices it appears an Unrecognized USB Device and a bubble notifying about an unrecognized USB device keeps popping in the task bar. Even after installing ASUS Sync it is not detected.
Click to expand...
Click to collapse
You don't connect your tablet to the PC through the dock USB port, do you?? Just had that in another thread....
If you connect the tablet directly, I'm stumped. No idea why it's not recognized...
Sent from my DROID4 using Tapatalk 2

berndblb said:
You don't connect your tablet to the PC through the dock USB port, do you?? Just had that in another thread....
If you connect the tablet directly, I'm stumped. No idea why it's not recognized...
Sent from my DROID4 using Tapatalk 2
Click to expand...
Click to collapse
I don't have a dock and I am connecting directly with the cable. I have just reflashed it to stock rom again hoping it resolves itself but nothing.
It's driving me crazy. The stock rom is really sluggish and I want to flash it to CM

Sounds like a windows driver issue to me. You need to force windows to use the right usb drivers. You normally do this by upgrading thenm in device manager. You may have a borked windows installation to fix as well..
Try the ones I have attached.

sbdags said:
Sounds like a windows driver issue to me. You need to force windows to use the right usb drivers. You normally do this by upgrading thenm in device manager. You may have a borked windows installation to fix as well..
Try the ones I have attached.
Click to expand...
Click to collapse
I have tried different windows installations with the different drivers that you provided me, still nothing. It seems to me that the device is not even sending proper ids to the system. Can it be caused by a damaged cable ?
Sent from my iPhone using Tapatalk - now Free

Had the same problem.I fixed it by uninstalling the faulty usb device. Then disconnected the usb cable. Reconnected. And the drivers installed.

nacef_l said:
I have tried different windows installations with the different drivers that you provided me, still nothing. It seems to me that the device is not even sending proper ids to the system. Can it be caused by a damaged cable ?
Click to expand...
Click to collapse
Im having the same problem and after one day of research I could not find a solution. I bought a use TF700 with a standard andriod on it, no mod, not unlocked, no root. When I connect it to the pc I get the same error, meaning just a USB Device showing up. Tried different PC's with different types of OS, no success.
Did you manage to fix the problem ? I would really appreciate some help because now I can't use that tablet in debug mode to test my android applications and that's all I bought it for. By the way, is there a adb tool that works wireless and doesn't neet root access or can I get root access without connecting my pad to my pc ?
Thanks for the help !

Well did you install adb fastboot drivers on the PCs you tried? Did you try it under Linux? Do you have the original Asus cable you connect it with?
adb over network is an option under Developer Options in Omni and Omni based roms - at least the LP roms. I don't think you can get that with an app you install. Probably needs to be baked into the kernel.

berndblb said:
Well did you install adb fastboot drivers on the PCs you tried? Did you try it under Linux? Do you have the original Asus cable you connect it with?
adb over network is an option under Developer Options in Omni and Omni based roms - at least the LP roms. I don't think you can get that with an app you install. Probably needs to be baked into the kernel.
Click to expand...
Click to collapse
First of all thanks a lot for your response, didn't think anyone would still react on that post because it's quite old. Yes I did install adb fastboot drivers, the device only shows up in the usb section saying usb device not recognized. I tried nearly every driver I found, installed the Andriod SDK, the Asus Sync Tool, the naked drivers... then removed them all (including the hidden ones) and installed just the adb fastboot -> no success. I have not tried it on linux, but on windows 7, 8 and 10. Android version is 4.2.1 and Build is 10.6.1.14.10. I now unlocked it using the apk provided by asus (version 7 , 8 did not work). Still for rooting I need pc connection, so I ordered a new cable today (cable is original Asus though).
I installed the Rom Manager and that tells me the ClockworkMod Recovery and TWRP are already installed. I also tried that recovery (power + vol) and got the same result as nacef meaning " I can access the bootloader but when I select RCK I get the droid laying on his back with the warning sign." Thing is, I don't know what the previews owner did, so it might be the reason he sold the Tablet. Can I get anywhere form that Bootloader ? Maybe boot as a Superuser and then use wireless adb to root the device ?
Thanks a lot for your help, Im feeling that I have wasted the money and the only way to get rid of that feeling is to fix the problem

Grab the Puppy Linux live CD from here: http://www.transformerforums.com/fo...t/46090-guide-adb-fastboot-linux-live-cd.html
It has adb fastboot already installed. If you don't get a connection with that one the problem would be tablet side, not Windows related.

I booted using that Puppy Linux and followed the Guide but no success. After entering "adb devices" I get the output "list of adb devices attached" and than a blank space. So I tried booting in fastboot like you described in your guide and entered "fastboot devices" but that also gives me nothing. Fastboot works though (as it's already included in that image) so I tried a bunch of other fastboot commands but that just results in "waiting for the device".
I don't know what to do now, it has something to do with the tablet itself. Im waiting for the new cable but don't think thats gonna change anything.

You are not trying to do this through the dock port, right? You are connecting the tablet directly to the PC?
The only answer I have left is either a broken cable or one of the pins in the port is bent or broken. Get a magnifying glass and check them out.

[HELP] PC not detecting my Asus TF300TG

Some days ago i flashed CROMI-x 5.2.2 on my ASUS tf300tg... after some days i tried to transfer some files to my tab via USB data cable from my PC,,,, but my pc did not detect anything even no pop up in windows device manager, next day i bought new data cable but still same issue.. even though i have tried on several Pcs,, win 7/xp everything but nothing to see... My tab is as new ... Charging is perfect so there is nothing wrong with the USB port. All sorts of Asus drivers i have tried but still no luck.....today i managed to factory reset but still the same problem.....now root and TWRP both gone :crying:.......Any solution please

jaffer707 said:
Some days ago i flashed CROMI-x 5.2.2 on my ASUS tf300tg... after some days i tried to transfer some files to my tab via USB data cable from my PC,,,, but my pc did not detect anything even no pop up in windows device manager, next day i bought new data cable but still same issue.. even though i have tried on several Pcs,, win 7/xp everything but nothing to see... My tab is as new ... Charging is perfect so there is nothing wrong with the USB port. All sorts of Asus drivers i have tried but still no luck.....today i managed to factory reset but still the same problem.....now root and TWRP both gone :crying:.......Any solution please
Click to expand...
Click to collapse
It sounds like it's a windows driver issue mate. Remove the asus drivers and install the naked drivers found on xda. I think they are up to version 0.73 now.
Also CROMi-X 5.2.2 is old. Please upgrade to 5.3 once you get the drivers sorted.

Well Dear,, I have tried this too, but still no progress ,, As i have described that my pc does not show any popup while attaching the USB, even nothing comes in Device manager,,, neither in Bootloader.
Honestly I am eager to Flash your CROMi-X 5.3 but i got the hurdle of this USB mess,,Before it was CROMi-X 5.2.2 in my ASUS tab...

If it is not the cable and you are sure that you installed the right USB drivers, it could be your PC USB port or (worst case) your tablet.
I am afraid you have to keep trying: use another USB port in your PC, use another PC, ...
Sent from my TF300T using XDA Premium HD app

Linux
Go get Linux and all your problems will melt away...:silly:

lj50036 said:
Go get Linux and all your problems will melt away...:silly:
Click to expand...
Click to collapse
Also true for linux on VirtualBox. Once, I successfully flashed recovery with virtualboxed xubuntu 13.10 on Windows 7 while Windows have no drivers for tablet.

let me try this...

Will i have tried in linux on different platform....but still the same...no luck....

However,,,one developer told me to flashing kernel may solve this problem...well i am on Stock Rom ww 10.6.2.11... and i have downloaded 10.6.2.11 KERNEL .....now any one can explain how to flash it with usb Support????

jaffer707 said:
However,,,one developer told me to flashing kernel may solve this problem...well i am on Stock Rom ww 10.6.2.11... and i have downloaded 10.6.2.11 KERNEL .....now any one can explain how to flash it with usb Support????
Click to expand...
Click to collapse
You can't flash the kernel like that. That is the source code. Either use my kernel flasher from the CROMi-X thread post 2 to change kernels or you'll have to flash the Asus stock firmware. It includes the kernel blob which will get flashed at the time.
IMO it is unlikely flashing the kernel will fix your issue but you can try it and find out yourself It's much more likely to be your PC.

sbdags said:
You can't flash the kernel like that. That is the source code. Either use my kernel flasher from the CROMi-X thread post 2 to change kernels or you'll have to flash the Asus stock firmware. It includes the kernel blob which will get flashed at the time.
IMO it is unlikely flashing the kernel will fix your issue but you can try it and find out yourself It's much more likely to be your PC.
Click to expand...
Click to collapse
As far as your roms are concerned,,,,i found them Best!!!!! comparing other Customized Roms for TF300TG....absolutely bug free.. and lots of good things....Installation Wizard is tremendous!!!!!!!!!!!!!!!!! :good:...
Regarding my issue it is clear now, that Stock rom does not need separate Kernels.
Now i want to get rid out of this USB problem.....As far my ability is concerned,,, you may call me "developing developer",, As couple months ago i unbricked one of my friend's TF300, through fastboot commands ( erase commands) in few seconds ,, That TF300 was stuck on boot logo...due to wrong firmware flashing....Even the Asus service center here in Pakistan quoted him for motherboard replacement. later on i flashed exact firmware,, Recovery, Root and then your CROMI-X rom and CROMI-X colour theme.....:good:
Just now i plugged his tab with "my" cable on "my" pc.....it detected in seconds
why not mine:crying:

jaffer707 said:
As far as your roms are concerned,,,,i found them Best!!!!! comparing other Customized Roms for TF300TG....absolutely bug free.. and lots of good things....Installation Wizard is tremendous!!!!!!!!!!!!!!!!! :good:...
Regarding my issue it is clear now, that Stock rom does not need separate Kernels.
Now i want to get rid out of this USB problem.....As far my ability is concerned,,, you may call me "developing developer",, As couple months ago i unbricked one of my friend's TF300, through fastboot commands ( erase commands) in few seconds ,, That TF300 was stuck on boot logo...due to wrong firmware flashing....Even the Asus service center here in Pakistan quoted him for motherboard replacement. later on i flashed exact firmware,, Recovery, Root and then your CROMI-X rom and CROMI-X colour theme.....:good:
Just now i plugged his tab with "my" cable on "my" pc.....it detected in seconds
why not mine:crying:
Click to expand...
Click to collapse
Don't know - very odd. What are you running on your tab currently?

sbdags said:
Don't know - very odd. What are you running on your tab currently?
Click to expand...
Click to collapse
Well.....Latest JB stock rom in on my Tab,,,bootloader is unlocked...charging ,,,apps,,,everything is perfect except USB:crying:
Well I heard in Q&A forum that motochopper can root over WIFI!!!!!!!!!!!!!!!!!!!!
will it be possible.???????????
if yes then what will be the method????
Can you explain me in details,,,how to do it over wifi....though i have tried it before but not get through
My Desktop pc is cabled with adsl WIFI modem and my ASUS TF300Tg is on WIFI on same modem.
it happened like that :
[*]
[*] Motochopper: Android root exploit (Windows version)
[*] v1.0
[*] by Dan Rosenberg (@djrbliss)
[*]
[*] Tested on the Motorola Razr HD, Razr M, Razr Maxx HD, and Atrix HD.
[*] Supports lots of other devices as well.
[*]
[*] Before continuing, ensure that USB debugging is enabled, that you
[*] have the latest USB drivers installed, and that your phone
[*] is connected via USB.
[*]
[*] WARNING: This will likely void the warranty on your device. I am
[*] not responsible for any damage to your phone as a result using this
[*] tool.
[*]
[*] Press enter to root your phone...
DNS name does not exist.
[*]
[*] Waiting for device...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
that's it......

First you have to enable TCP mode for ADB on your tablet in developer options ("ADB over network"). It is a big security risk, if you are not in your own WLAN, so it is disabled by default. Will also automatically be disabled on next reboot.
Then you need to connect the daemon on your PC:
adb tcpip YOUR_TABLET_IP
Once the adb daemon is connected, try running motochopper. It should work, though I never tried myself.
Sent from my TF300T using Tapatalk

I could'nt find "TCP mode for ADB" on TF300TG settings in developer options... where it is???

jaffer707 said:
I could'nt find "TCP mode for ADB" on TF300TG settings in developer options... where it is???
Click to expand...
Click to collapse
Settings > System > Developer options > Debugging > ADB over network
Sent from my TF300T using Tapatalk

f69m said:
Settings > System > Developer options > Debugging > ADB over network
Sent from my TF300T using Tapatalk
Click to expand...
Click to collapse
This facility is only on Rooted Device:crying:

jaffer707 said:
This facility is only on Rooted Device:crying:
Click to expand...
Click to collapse
Oops, sorry, didn't know that.
Sent from my TF300T using Tapatalk