my sensation experience a problem, it's stuck on EDGE network, no matter what the operator i've tried
tried change radio with matching RIL, also try changing firmware, but still no change
try flashing other ROM, but no result
even my friend's sensation with same provider getting HSDPA signal
anyone can help me?
thanks
kairanz said:
my sensation experience a problem, it's stuck on EDGE network, no matter what the operator i've tried
tried change radio with matching RIL, also try changing firmware, but still no change
try flashing other ROM, but no result
even my friend's sensation with same provider getting HSDPA signal
anyone can help me?
thanks
Click to expand...
Click to collapse
Mhhmmmm .... may be a baseband/hardware problem...
For example, I live in Colombia (south America) and I've a HTC Sensation 4G (T-Mobile) and my signal is 2G/EDGE always, because the HSPA/3G band in this phone is not supported in my country
Isn't supported, why? I don't know... What I know is this problem is a hardware issue (search in another threads) and for the moment there aren't solution.
-----------
MAYBE the 3G frequencies of your phone isn't supported in your zone/area
kairanz said:
my sensation experience a problem, it's stuck on EDGE network, no matter what the operator i've tried
tried change radio with matching RIL, also try changing firmware, but still no change
try flashing other ROM, but no result
even my friend's sensation with same provider getting HSDPA signal
anyone can help me?
thanks
Click to expand...
Click to collapse
Hi,
Try this:
Take off the back cover.
At the bottom of the phone there are 2 gold pins.
These are your phone radio connectors.
Lift them GENTLY up,so that they make a better connection to the back cover.
kairanz said:
my sensation experience a problem, it's stuck on EDGE network, no matter what the operator i've tried
tried change radio with matching RIL, also try changing firmware, but still no change
try flashing other ROM, but no result
even my friend's sensation with same provider getting HSDPA signal
anyone can help me?
thanks
Click to expand...
Click to collapse
Have you tried selecting gsm/wcdma auto in the network menu? You haven't made it clear whether you've tried this. Your settings may be stuck on gsm only.
icanttinkofaname said:
Have you tried selecting gsm/wcdma auto in the network menu? You haven't made it clear whether you've tried this. Your settings may be stuck on gsm only.
Click to expand...
Click to collapse
Sometimes WCDMA Preferred is a good setting. Then it'll try for 4g and default to lower speeds if the network isnt available
malybru said:
Hi,
Try this:
Take off the back cover.
At the bottom of the phone there are 2 gold pins.
These are your phone radio connectors.
Lift them GENTLY up,so that they make a better connection to the back cover.
Click to expand...
Click to collapse
i have lifted it, and still the same
but a very strange thing happened. after i take off my back cover, it's momentarily jump to HSDPA, and then no signal
icanttinkofaname said:
Have you tried selecting gsm/wcdma auto in the network menu? You haven't made it clear whether you've tried this. Your settings may be stuck on gsm only.
Click to expand...
Click to collapse
tried *#*#4636#*#* , still no go
but if i tried to turn off radio from here, exit, and dial this command again, my network is on CDMA/LTE auto
it's so strange
________________________________________________________________________________
update : i also noticed that my phone don't have any gps reception too
so strange, i just put my phone in airplane mode in car dashboard and driving for about 8 hours nonstop and this problem occured
Related
So I decided to Root, S-Off and flash Coredroid v4.7 on my Inspire, but I leave it with the stock radio (12.39.60.19P_26.06.04.06_M), but the signal seems pretty weak even on places where my Nexus one was at full strength my Inspire seems to only be able to grab 2 bars at much, and the WiFI connection seems week too, on my N1 I used to be able to get full signal from more than 20 meters, but my Inspire seems to lose it after 15 meters.
I read some posts and other blogs/forums and some attribute those issues to the radio version, so I hope someone can give me an opinion and tell me if I should Update the radio and to which version if so.
Thanks in advance.
Try this
For phone signal, try *#*#4636#*#* in the dialer. This will bring up a screen that has 5 options, I went to phone and scroll to the bottom. Under the preferred network I changed it to GSM only as its an AT&T phone anyway, I was getting 1 or 2 bars at home and was missing calls left and right. after setting this, back out and shut the phone down then restart. I have all 4 bars now. It would also eat the battery, mine was on WCDMA preferred and I think it was searching for that signal constantly. There is a screen for wifi also but there is nothing adjustable there.
wby300 said:
For phone signal, try *#*#4636#*#* in the dialer. This will bring up a screen that has 5 options, I went to phone and scroll to the bottom. Under the preferred network I changed it to GSM only as its an AT&T phone anyway, I was getting 1 or 2 bars at home and was missing calls left and right. after setting this, back out and shut the phone down then restart. I have all 4 bars now. It would also eat the battery, mine was on WCDMA preferred and I think it was searching for that signal constantly. There is a screen for wifi also but there is nothing adjustable there.
Click to expand...
Click to collapse
Odd that it would have WCDMA preferred as default. I just adjusted this as well and it improved the signal in my office. Good catch.
Gsm only does not work for me, my lame carrier runs on gsm but their mobile internet runs on their 3g so I need to connect to both. Setting it to wcdma/gsm auto seems to have improved the signal
Sent from my Desire HD using XDA App
Arcano30 said:
Setting it to wcdma/gsm auto
Click to expand...
Click to collapse
You saw this option in the phone menu after dialing *#*#4636#*#* ?
SysAdmNj said:
You saw this option in the phone menu after dialing *#*#4636#*#* ?
Click to expand...
Click to collapse
That's it.
Sent from Desire HD or Inspire 4G or whatever this thing is called via premium XDA app.
Hey all, I'm on AT&T running radio 26.06.04.06_M. Any specific recommendations? GSM/CDMA Auto (PRL) seems to give me the best service based on bars, but that doesn't necessarily mean much (I'm on an HSDPA connection with 3/4 fluctuating right now).
Also, I think I might not have HSUPA enabled with this radio, I'm only getting .56Mbps upload and around a 2.79 download (Whereas on standard 3G with my old iPhone I typically pulled around a 1.2). HSDPA is without a doubt enabled and it shows that I'm connected on that network, but is there a better radio I should try out?
SysAdmNj said:
You saw this option in the phone menu after dialing *#*#4636#*#* ?
Click to expand...
Click to collapse
I meant GSM/CDMA
Arcano30 said:
I meant GSM/CDMA
Click to expand...
Click to collapse
Thats what i thought and when I tried that it only gave me an "E" signal so I went back to how it was WCDMA
Nice just changed mine and full signal now. Thanks guys.
Sent from my Desire HD using XDA App
My HTC Desire S seems to be connected on the Internet on 3G (H) but nothing comes through. The 2 arrows also blink but the connectivity does not seem to take place.
If i turn WIFI on it works and when i switch off WIFI - the internet get stuck
I have done hard reset, restored to factory settings and problem persists.
I tried the sim card in another phone the and internet seems to work there on 3G suggesting it is not a network or sim issue.
I wonder if there is any setting that needs to be rectified.
Any idea?
Thanks
M
what rom/kernal are you using?
You've already tried most of things that I'd normally suggest, so don't think that I can help very much.
Sounds like it could be APN issue (which I now little about), where do you live and what network are you on? As this will help others to possibly assist further.
Does your network provider have the function where they can send your phone network settings, if so possibly try this?
I'm on three and live in London, UK.
rom 2.3.3. kernel 2.6.35.10
ghislandi said:
I'm on three and live in London, UK.
rom 2.3.3. kernel 2.6.35.10
Click to expand...
Click to collapse
Sounds like the stock (standard - out if the box) phone in which case call 3 or take it into a shop, not that there likely to be able to help but...
Sent from my HTC Desire S using xda premium
ghislandi said:
I'm on three and live in London, UK.
rom 2.3.3. kernel 2.6.35.10
Click to expand...
Click to collapse
does 3 UK use 900 / 2100 band for 3g?
if it doesn't you may have to change to a different provider
Im looking for some help to try and resolve the poor signal i have on my handset.
The problem is, at home-
-if im on GSM only (settings-Mobile networks-network mode) i have no 4-5(FULL) bars signal no problem.
-If i am on WCDMA i have no signal-1 bar.
-if i am on GSM/WCDMA auto i also have no signal-1 bar.
So what i am asking is- does anyone know how or where to alter the threshold for when the phone switches from GSM to WCDMA when in a low WCDMA signal area. I think the threshold is set more towards WCDMA and i would like to at least fiddle with the values to make it more usable.
I could just leave the phone on GSM but i lose out on high data speeds if i am in a good signal area.
Also for reference i am in the UK on O2. I previously had a desire and never had signal issues. I have also tried a new back cover on my phone to check that the anteneas were working- and it was the same with the other cover (genuine HTC not from fleabay).
I have also tried a few different roms, Different radio's & matching rils and i still have poor signal so this is my last idea really.
Any and all help with this issue is much appreciated.
Thanks
What type of case do you have ... That can make a big differences man .... In poor signal ...
Sent from my HTC Sensation 4G using xda premium
ufokid22 said:
What type of case do you have ... That can make a big differences man .... In poor signal ...
Sent from my HTC Sensation 4G using xda premium
Click to expand...
Click to collapse
i dont have any case on!
I have since discovered, i went into the phone config secret menu (*#*#4636#*#*) and the network selection was WCDMA prefered. When i compared this to my girlfriends samsung galaxy W (stock) her's was set to GSM/CDMA (PRL) so i swaped mine to match her's and it has helped a bit but the setting seems to revert back to WCDMA prefered when i reboot.
Does anyone know where or how to set this permanently? Built.prop or something?
Thanks
I struggled with signal I bought a case mate protective cover for the back, and from time to time I stretch the pins under the battery cover, my signal is pretty strong normally get 3-5mb down speed aswell, wcdma preferred is the right option IMO, have you tried your sim in another phone? Sometimes sims need replacing
Sent from my HTC Sensation Z710e using xda premium
# Default network type.
# 0 => WCDMA preferred.
ro.telephony.default_network=0
Can anyone tell me why, if i change this value using es file explorer to
ro.telephony.default_network=3
it is still WCDMA prefered after a reboot. i even tried wiping cache and dalvik?
Might be an issue with the radio. If you are on a custom ROM, make sure you flash the recommended radio.
I just got an otterbox box case and my signal got better ...
Sent from my HTC Sensation 4G using xda premium
Same problem
This dude(beady) has literally given detailed description of the problem im facing aswell..
-good network in GSM mode(only edge no HSDPA)
-very poor network in WCDMA mode(HSDPA) with a lot of drop calls ...
im not rooted..In India Dehradun on Vodafone with Samsung Galaxy S3(pebble blue)
is it a hardware problem??..software problem??
please help..i need good data speeds with a good network to take calls aswell(what phones were originally meant for ..)
what to do..nobody still seems to have given substantial answer.
Have you tried the generic ICS radio/ril? I know you tried different radios but have you tried those?If you want you can change radio /ril and find one that provides a better signal. Radio /ril is something that you really have to find out for yourself as to which one is best because we all live in different areas and our signals will be different. Best place to start would be generic ICS radio and ril . They have several different ones available. It will take some experimenting on your part to see which radio and ril files will provide the best signals for your area. This is a option. I've done this myself. I was lucky, the first radio and ril files I flashed Madre a great difference for me. But start out looking in the generic ICS radio / ril files.you should have success there. Remember to flash BOTH radio AND ril. The ril is flashed the regular way , the radio is flashed like pg58img file through bootloader. Also remember to DELETE the pg58img file after it updates or it will continue to try to update over and over. Hope this helps! Best wishes!
Sent from my Sensation Z710e using xda premium
Try this, on dialer type in '*#*#4636#*#*' without the quotes.
Click Phone Settings.
Select 'GSM Auto(PRL)' under the list to choose from.
Don't touch anything else.
No reboot required. A reboot restores what you've done. So, if you have more problems then reboot.
Sent from my HTC Sensation using xda premium
go to www gsminstallaktions co uk
solve any problems with weak GSM coverage. to enter:
ww.gsminstallations.co.uk
D00mSlayer,
With your advice I changed a $40 worthless brick into a $40 super buy!
Thank you sir for your post!
my phone will drop connection and then not reconnect. no voice, no data. (wifi still works)
what I've tried:
1. Different radios/firmware
2. different roms
3. different preferred network types
4. switching airplane mode on and off
what I haven't tried:
1. different sim
2. calling tmobile for suggestions
What else could cause this problem?
it could be a hardware issue
Hello,
I have the same issue than you !
I am facing issues such as call drop and no 3G data connection in some area in my region since I have 5 signal bar and H letter displayed (HSDPA connection)...
I have found a workaround consisting in:
1 - Switching to GSM Only mode (2G Only)
2 - Desabling Mobile Data Connection
Then it works, I can pass and receive voice call ...
Regards,
Nino
I'm new to the Sensation and having the exact same issue.
Followed the stickies in the Dev section to S-OFF, root and bypass SIM lock and then once the SIM card is inserted I get only GSM and no data.
If you use *#*#4636#*#* in the Dialer and go to Phone Information do you notice that it always switches to WCDMA preferred? I change to GSM/CDMA auto PRL like all my other Android devices (on Rogers Wireless) and it disconnects, reconnects but only for GSM and no data. It sometimes says it's connected to EDGE or HSPA but no icon at the top right and then it reverts back to GSM.
I have also tried flashing virtually every firmware, ensuring that the radio and RILs match (I had an HTC Desire Z so the HTC phones are not new to me entirely). I don't know what else to do. I tried a Bell SIM card and tried all of the same options to no avail.
I really hope someone can figure this out. I don't want to have destroyed a phone that I just bought for my wife. Her Atrix broke and I purchased that outright as well, so this is really killing my wallet. I've been through about 10 Android devices and I wouldn't say I'm a newb, but I really do feel like one right now. This sucks!
Get a new sim from tmo if it's over 2 phones old.
Sent from my HTC Sensation 4G with Beats Audio using Tapatalk
mrbkkt1 said:
Get a new sim from tmo if it's over 2 phones old.
Sent from my HTC Sensation 4G with Beats Audio using Tapatalk
Click to expand...
Click to collapse
Exactly. Although I got it before I saw your post, you were completely correct.
definitely try a new sim card.
bongd said:
I'm new to the Sensation and having the exact same issue.
Followed the stickies in the Dev section to S-OFF, root and bypass SIM lock and then once the SIM card is inserted I get only GSM and no data.
If you use *#*#4636#*#* in the Dialer and go to Phone Information do you notice that it always switches to WCDMA preferred? I change to GSM/CDMA auto PRL like all my other Android devices (on Rogers Wireless) and it disconnects, reconnects but only for GSM and no data. It sometimes says it's connected to EDGE or HSPA but no icon at the top right and then it reverts back to GSM.
I have also tried flashing virtually every firmware, ensuring that the radio and RILs match (I had an HTC Desire Z so the HTC phones are not new to me entirely). I don't know what else to do. I tried a Bell SIM card and tried all of the same options to no avail.
I really hope someone can figure this out. I don't want to have destroyed a phone that I just bought for my wife. Her Atrix broke and I purchased that outright as well, so this is really killing my wallet. I've been through about 10 Android devices and I wouldn't say I'm a newb, but I really do feel like one right now. This sucks!
Click to expand...
Click to collapse
I've tried 5 different SIMs now. It's not a SIM issue. The other poster has a different issue but mine's identical to the OP's.
bongd said:
I've tried 5 different SIMs now. It's not a SIM issue. The other poster has a different issue but mine's identical to the OP's.
Click to expand...
Click to collapse
have you tried allowing data roaming in settings? I'm sure you have...
stonew5082 said:
have you tried allowing data roaming in settings? I'm sure you have...
Click to expand...
Click to collapse
Haha yup, thanks though! I know, it could always be something so tiny and stupid too, eh.
Someone posted in my own thread and said to do the following. Will by trying it once I get home. Could the OP please try this and report back? I sure hope it works!
johnerz said:
first open the dialer
Type *#*#4636#*#*
select phone info
look for the only drop down box - hit it - choose wcdma prefered - hit back 3 times
Go to menu settings woreless and networks
hit mobile network - it need to be ticked
hit mobile networkS hit APN or Access point names - hit the menu button - choose reset to defaults
go back to mobile networks - choose network mode, select wcdma only - look for the 3G or h sign when it shows go back and choose gsm/wcdma auto
if that fails do a manual net work selection - choose your networks 3G option
Click to expand...
Click to collapse
bongd said:
Haha yup, thanks though! I know, it could always be something so tiny and stupid too, eh.
Someone posted in my own thread and said to do the following. Will by trying it once I get home. Could the OP please try this and report back? I sure hope it works!
Click to expand...
Click to collapse
I did try every setting in there. The new sim card fixed it! So I guess our problems are different.
Whenever my phone is connected to wifi it switches the phones network setting into GSM only. It essentially drops all cell signal. It still works over the wifi obviously, but I'm curious as to why this is happening?
As soon as I disconnect from the wifi, it immediately swaps back to the wcdma/gsm auto.
I cannot attribute it to any apps, or my ROM specifically (ARHD 6.7.2) because it was happening before I wiped and flashed the phone.
I don't think this is normal. Does anyone else seem to be having this issue?
z4ckm0rris said:
Whenever my phone is connected to wifi it switches the phones network setting into GSM only. It essentially drops all cell signal. It still works over the wifi obviously, but I'm curious as to why this is happening?
As soon as I disconnect from the wifi, it immediately swaps back to the wcdma/gsm auto.
I cannot attribute it to any apps, or my ROM specifically (ARHD 6.7.2) because it was happening before I wiped and flashed the phone.
I don't think this is normal. Does anyone else seem to be having this issue?
Click to expand...
Click to collapse
Same here. 6.7.2 and older
Losing gsm signal when wifi transmitting data
Different kernels no improvement
sp5it said:
Same here. 6.7.2 and older
Losing gsm signal when wifi transmitting data
Different kernels no improvement
Click to expand...
Click to collapse
Same. I tried different Kernals and different Radios as well.
I tried different ril/radio sets. Didn't work
I have to try stock RUU.
Thats normal nothing to worry about keep in mind our devices is infact GSM
Sent from my HTC Sensation 4G using xda premium
I solved the problem. I cleaned contact pads inside back cover with alcohol and cotton earbud. Cleaned also contact springs.
Problem is gone since over week now.
Mike