Related
Hey guys. A question for you. I'm coming from galaxy s. I'm no noob. With the sgs you could restore your backup in clockwork if you screwed up. Can't you do this with o3d (reading about people bricking their device) . If not, what's the point with a backup?
Sent from my LG-P920 using Tapatalk
Bump...
Sent from my LG-P920 using Tapatalk
Where did you hear the backups aren't working?
Works fine, no bricks. I used the backups a lot when I'm tweaking my phone.
I believe the people who were getting bricked phones from cwm are just using a different recovery. Something like thrill using Optimus 3D's recovery
Sent from my LG-P920 using XDA App
DevJackey said:
Where did you hear the backups aren't working?
Works fine, no bricks. I used the backups a lot when I'm tweaking my phone.
I believe the people who were getting bricked phones from cwm are just using a different recovery. Something like thrill using Optimus 3D's recovery
Sent from my LG-P920 using XDA App
Click to expand...
Click to collapse
Just what i thought from reading the "unbrick" thread.
So like with other devices if can get in to CWM and have a backup im "safe"?
borelis said:
Just what i thought from reading the "unbrick" thread.
So like with other devices if can get in to CWM and have a backup im "safe"?
Click to expand...
Click to collapse
Most users don't have a bricking problem. Yea CWM works like its supposed to. For example, yesterday, I was changing build.prop. Caused a boot loop. Pulled battery, Went to recovery, restored backup.
Never bricked my phone, but there are many reasons for bricking, you'll be fine.
Sent from my LG-P920 using XDA App
DevJackey said:
Most users don't have a bricking problem. Yea CWM works like its supposed to. For example, yesterday, I was changing build.prop. Caused a boot loop. Pulled battery, Went to recovery, restored backup.
Never bricked my phone, but there are many reasons for bricking, you'll be fine.
Sent from my LG-P920 using XDA App
Click to expand...
Click to collapse
hey just out of curosity what are the most common ways to brick the LG? just want a heads up on what to avoid doing, because i bought my lg 3d from a friend already rooted cwm and aura rom. Just wondering if i wanted to go back to like rogers stock what would i have to do?
The "bricking" with CWM is caused when you update the system with an LG Rom via OTA or Web Updater and you have the CWM recovery partition instead of the LG original one.
If you install the same ROM from a zip via CWM backup recovery it works like a charm.
Sent from my LG-P920 using Tapatalk
Beriaru said:
The "bricking" with CWM is caused when you update the system with an LG Rom via OTA or Web Updater and you have the CWM recovery partition instead of the LG original one.
If you install the same ROM from a zip via CWM backup recovery it works like a charm.
Sent from my LG-P920 using Tapatalk
Click to expand...
Click to collapse
Thank you
Sent from my LG-P920 using Tapatalk
sorry i'm a newb
how do i install 4.1.2 stock with odin without wiping my phone?
I can't use kies because for some reason it won't recognize my phone
Read the stickies in the development section on how to flash roms. There are a number of steps you have to take and if you don't educate yourself first your going to be sorry.
Sent from my SGH-I727R using xda app-developers app
jd1639 said:
Read the stickies in the development section on how to flash roms. There are a number of steps you have to take and if you don't educate yourself first your going to be sorry.
Sent from my SGH-I727R using xda app-developers app
Click to expand...
Click to collapse
flashing a rom is the same as flashing the stock 4.1.2?
Yes. Have you tried to upgrade your phone with kies? Where did you get the 4.1.2 file from, what file format is it?
Sent from my SGH-I727R using xda app-developers app
jd1639 said:
Yes. Have you tried to upgrade your phone with kies? Where did you get the 4.1.2 file from, what file format is it?
Sent from my SGH-I727R using xda app-developers app
Click to expand...
Click to collapse
I can't upgrade via kies because it won't even recognize my phone, tried on 2 diff computers.
got it from this http://samsung-updates.com/
ANigerian said:
flashing a rom is the same as flashing the stock 4.1.2?
Click to expand...
Click to collapse
Please read the stickies in the development section like you were advised.
ANigerian said:
I can't upgrade via kies because it won't even recognize my phone, tried on 2 diff computers.
got it from this http://samsung-updates.com/
Click to expand...
Click to collapse
Do you have an i727 skyrocket?
Sent from my SGH-I727R using xda app-developers app
Read all the stickies you can before doing anything. Vincom has posted a few, read them all, read them till you feel confident you can do this. Once you understand what you are doing, the skyrocket is a really easy phone to work with. I would start with this http://forum.xda-developers.com/showthread.php?t=1773659
livefree79 said:
Read all the stickies you can before doing anything. Vincom has posted a few, read them all, read them till you feel confident you can do this. Once you understand what you are doing, the skyrocket is a really easy phone to work with. I would start with this http://forum.xda-developers.com/showthread.php?t=1773659
Click to expand...
Click to collapse
This. All of this.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
jd1639 said:
Do you have an i727 skyrocket?
Sent from my SGH-I727R using xda app-developers app
Click to expand...
Click to collapse
yeah the one from rogers
ANigerian said:
yeah the one from rogers
Click to expand...
Click to collapse
Do you know of Odin recognizes your device?
God promised men that he'd put beautiful women in all corners of the world. Then he laughed and laughed and made the world round
ANigerian said:
yeah the one from rogers
Click to expand...
Click to collapse
1 Download the Jellybean Rogers rom from here https://mega.co.nz/#!kNpxDS4Q!J1tf-jp6ppfevvxNMqxsDQAGI48p9Zz0jnfokgeCeXo
2 Wipe DATA/SYSTEM/DALVIK in CWM.
3 Flash tar as PDA in Odin 3, download Odin here http://file.jayceooi.com/2012/05/Odin3-v3.04.zip.
4 Flash old recovery tar as PDA in Odin 3. Link http://d-h.st/Z97 .
5 Flash new recovery zip in old recovery. Link http://forum.xda-developers.com/showthread.php?t=1777970 .
6 Done.
0 (you will have to root this yourself, read the stickies or this whole thread!!!).
For prerooted and improved Rogers JB (get CWM here http://d-h.st/Z97 ) .
1 Download rom here http://forum.xda-developers.com/showthread.php?t=2158262.
2 Download radio of your choice, or don't (radio for above rom https://mega.co.nz/#!FchjUArZ!QPtwwGvt0KPNE9LFkj9lhTObUSZ1MtI-vKeQxdiefU8 ) Flash radio in CWM.
3 Wipe DATA/SYSTEM/DALVIK in CWM.
4 Flash rom then radio from old recovery / new recovery (<--link).
5 Done.
PS. If you use google backup (in settings/accounts) all your phone numbers and most other settings will remain. There are other ways but i don't care about them. ds.
Finally i would like to join the crowd and say READ THE STICKIES. They exist so that you won't have to waste your own time making threads like this.
Good luck :good:
OP, I think you should stay on ics until you can get kies to work. Your going to end up losing everything on your phone at best and bricking it at worst.
Sent from my SGH-I727R using xda app-developers app
I am trying to revert from an ics rom to a gingerbread rom via cwm. Is there anything special I have to do?
Sent from my SGH-T999 using xda premium
Assuming your cwm is up to date just wipe cache and system then flash. But ALWAYS remember to make a backup first.
On a side note, ever use twrp?
Sent from my GT-N7100 using xda premium
Ummm, its a little more complicated than Flashing.Lol
You are reverting system files and such. Grab you a STOCK image from Sammobile than flash in Odin following the steps outlined in konanes thread in the dev section. Don't ever flash backwards between versions of android in cwm, you'll soft brick your phone. Bad advice ^^^^dude
jbats said:
Ummm, its a little more complicated than Flashing.Lol
You are reverting system files and such. Grab you a STOCK image from Sammobile than flash in Odin following the steps outlined in konanes thread in the dev section. Don't ever flash backwards between versions of android in cwm, you'll soft brick your phone. Bad advice ^^^^dude
Click to expand...
Click to collapse
Really? Good thing it didn't soft brick my mom's phone. Went from P.A to Blaz3r...
im_awesome_right? said:
Really? Good thing it didn't soft brick my mom's phone. Went from P.A to Blaz3r...
Click to expand...
Click to collapse
I'm talking about going from firmware versions not ROMs. Going GB to ICS is fine. ICS to GB takes odin
Bml /mtd The partitions are changed from GB to ICS .
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Hmm, guess I learned something today.
I've never had a problem going from jb to ics. But I've never flashed back to gb
Sent from my SAMSUNG-SGH-T769 using xda premium
Hi guys,
my rooted 4.2.2 rom'd gs3 has a finicky usb port and will not charge. I need to return the phone for a warranty exchange, but is there a way I can do that when the usb port is damaged and is not recognized by the pc? thanks for the help, it is greatly appreciated!
Have you tried mobile odin app.
Sent from my GT-P5113 using xda premium
amotamatapia said:
Hi guys,
my rooted 4.2.2 rom'd gs3 has a finicky usb port and will not charge. I need to return the phone for a warranty exchange, but is there a way I can do that when the usb port is damaged and is not recognized by the pc? thanks for the help, it is greatly appreciated!
Click to expand...
Click to collapse
1. Mobile odin, however I've personally never used it. There are probably guides out there somewhere how to return the phone to stock.
2. You may still be under samsung's warranty period, they don't care if your phone is rooted and will fix hardware problems. They will flash the most recent stock rom and firmware they have to your phone so you'd have to re root it.
Sent from my SCH-I535 using Tapatalk 2
I have not tried the mobile odin app (did not know it existed). I will try that and post back results in a little while. Thanks everyone
Its pretty straight forward. It does cost you a few bucks but its always nice to have and support a great developer.
Sent from my GT-P5113 using xda premium
I downloaded the 1.2gb file which was supposed to flash the stock ROM and lock the boot loader, but all it did was wipe my current ROM? Can anyone help me understand what I did wrong? Thanks again! I used the mobile Odin app and it all seemed OK ...md5 sum was good too
bbqsfire said:
Its pretty straight forward. It does cost you a few bucks but its always nice to have and support a great developer.
Sent from my GT-P5113 using xda premium
Click to expand...
Click to collapse
Posted above this the issues I'm having. Thanks for your help
What exactly do you mean wiped your current rom. Does it boot, you get anything to happen or just blank.
Sent from my SCH-I535 using xda premium
amotamatapia said:
I downloaded the 1.2gb file which was supposed to flash the stock ROM and lock the boot loader, but all it did was wipe my current ROM? Can anyone help me understand what I did wrong? Thanks again! I used the mobile Odin app and it all seemed OK ...md5 sum was good too
Click to expand...
Click to collapse
What guide did you follow? You could've done a number of things wrong, try to boot into recovery or download mode to see if you're hardbricked.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
What guide did you follow? You could've done a number of things wrong, try to boot into recovery to see if you're hardbricked.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Looks like I cannot boot into recovery. Download mode is fine. .the phone just boots into the 4.2.2 ROM I had. I was using this guide to revert back to stock
http://forum.xda-developers.com/showthread.php?t=1762709
bbqsfire said:
What exactly do you mean wiped your current rom. Does it boot, you get anything to happen or just blank.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
It did a data wipe of the ROM I currently had
amotamatapia said:
It did a data wipe of the ROM I currently had
Click to expand...
Click to collapse
Ok I read your post from earlier. What file did you try to flash. Was the old 4.1.1 or one of the newer 4.1.2 img files
Sent from my SCH-I535 using xda premium
bbqsfire said:
Ok I read your post from earlier. What file did you try to flash. Was the old 4.1.1 or one of the newer 4.1.2 img files
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
it was this one: COMBINATION_I535VRBLK3_I535VZWBLK3_381038_REV09_u ser_low_ship_NOWIPE_FIXED.tar.md5
which is 4.1.1 i believe
amotamatapia said:
it was this one: COMBINATION_I535VRBLK3_I535VZWBLK3_381038_REV09_u ser_low_ship_NOWIPE_FIXED.tar.md5
which is 4.1.1 i believe
Click to expand...
Click to collapse
Correct it is the 4.1.1 img. I am away from my home computer but I think that might have been the wrong file since you want to go back to stock. I will try to search the thread for the file I used during my training
Sent from my SCH-I535 using xda premium
---------- Post added at 09:52 AM ---------- Previous post was at 09:43 AM ----------
amotamatapia said:
it was this one: COMBINATION_I535VRBLK3_I535VZWBLK3_381038_REV09_u ser_low_ship_NOWIPE_FIXED.tar.md5
which is 4.1.1 i believe
Click to expand...
Click to collapse
The link below should take you to the mb1 file. This will wipe everything and should take you back to stock 4.1.2. I have not done this method in a while so if something borks im sorry for mentioning it.
http://forum.xda-developers.com/showthread.php?t=
Sent from my SCH-I535 using xda premium
bbqsfire said:
Correct it is the 4.1.1 img. I am away from my home computer but I think that might have been the wrong file since you want to go back to stock. I will try to search the thread for the file I used during my training
Sent from my SCH-I535 using xda premium
---------- Post added at 09:52 AM ---------- Previous post was at 09:43 AM ----------
The link below should take you to the mb1 file. This will wipe everything and should take you back to stock 4.1.2. I have not done this method in a while so if something borks im sorry for mentioning it.
http://forum.xda-developers.com/showthread.php?t=
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Thanks for your help I was able to get a usb connection enough and I used Odin on my laptop. The only problem I have now is that the custom unblock symbol appears when I boot up the phone. Any idea how to remove that now that root is gone? Ignore the following words...my phone won't let me edit them out. Thanks again.
Edit: it looks like the file I used was a 4.0.4 image. For return purposes is it fine if it's the older version? There should be no signs of root now. I'll keep checking for updates though
amotamatapia said:
Thanks for your help I was able to get a usb connection enough and I used Odin on my laptop. The only problem I have now is that the custom unblock symbol appears when I boot up the phone. Any idea how to remove that now that root is gone? Ignore the following words...my phone won't let me edit them out. Thanks again.
Edit: it looks like the file I used was a 4.0.4 image. For return purposes is it fine if it's the older version? There should be no signs of root now. I'll keep checking for updates though
Click to expand...
Click to collapse
You should be able to go into settings and factory reset your phone and then try taking the ota.
Sent from my SCH-I535 using xda premium
bbqsfire said:
You should be able to go into settings and factory reset your phone and then try taking the ota.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Thanks for your help throughout this process. I definitely was pretty frazzled at the whole thing !
bbqsfire said:
You should be able to go into settings and factory reset your phone and then try taking the ota.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Phone isn't wanting to update the android version...should I be worried for warranty exchange periodpurposes?
amotamatapia said:
Phone isn't wanting to update the android version...should I be worried for warranty exchange periodpurposes?
Click to expand...
Click to collapse
I would, if you have an ics rom they will be able to tell something is off. It should accept an OTA update. If you can odin again, use the vrblk3 image and accept the ota to vrbmb1. It may not be updating due to to the jump from ics to the most recent base. That will make sure you're completely back to stock, with a locked bootloader, and a stock recovery.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
I would, if you have an ics rom they will be able to tell something is off. It should accept an OTA update. If you can odin again, use the vrblk3 image and accept the ota to vrbmb1. It may not be updating due to to the jump from ics to the most recent base. That will make sure you're completely back to stock, with a locked bootloader, and a stock recovery.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I can only find 4.1.1 files...and the link posted earlier in the thread doesn't work. Any idea where to find a 4.1.2 version?
I bought a galaxy s 3 and wanna root it preferably with cyanogenmod because of being a fan of vanilla android. Im new to rooting but trying to learn as much as I can about it. I figured if it works I'll switch to it from my note 2 and show it off a bit...thanks for anu assistance and btw...im new to this site
Sent from my SCH-I605 using xda app-developers app
If ur fone has the 4.3OTA then u won't be able to flash that rom or custom roms aosp aokp Cyanmode
twistedillutions said:
If ur fone has the 4.3OTA then u won't be able to flash that rom or custom roms aosp aokp Cyanmode
Click to expand...
Click to collapse
Just to be clear, if your gs3 has the official 4.3 on it, you CANNOT unlock the bootloader. You WILL brick your phone if you try.
Safer not to mess with it at this point imho
Sent from my SCH-I535 using XDA Premium 4 mobile app
Well that sucks...is there anything I can do with my s3?? Thanks for the answers bte
Sent from my SCH-I605 using xda app-developers app
xopterdoc415 said:
Well that sucks...is there anything I can do with my s3?? Thanks for the answers bte
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Everything is here:
http://forum.xda-developers.com/showthread.php?t=2575661
Lots you can do, xposed, safestrap, custom 4.3 touchwiz roms. Unfortunately no aosp.
Sent from my SCH-I535 using Tapatalk 2
I definitely appreciate but cyanogrnmod is why I bought the phone. .. I'd there a way to possibly uninstall the update in that case or would I pay much have to wait till cyanogenmod comes or with something to get around Knox? Truthfully a good reputable stock android feel Rom installer would be nice but I'm super noob status when it comes to this and would appreciate any assistance
Sent from my SCH-I535 using xda app-developers app
xopterdoc415 said:
I definitely appreciate but cyanogrnmod is why I bought the phone. .. I'd there a way to possibly uninstall the update in that case or would I pay much have to wait till cyanogenmod comes or with something to get around Knox? Truthfully a good reputable stock android feel Rom installer would be nice but I'm super noob status when it comes to this and would appreciate any assistance
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
So far no one has been able to unlock the bootloader. Not even downgrade ur fone also results in hard brick
Well definitely appreciated...what would be a good rom that y'all would suggest for me in that case...can I still root this phone or its that screwed due to the 4.3 update??
Sent from my SCH-I605 using xda app-developers app
xopterdoc415 said:
Well definitely appreciated...what would be a good rom that y'all would suggest for me in that case...can I still root this phone or its that screwed due to the 4.3 update??
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
I literally linked the thread for you where to look. Read the discussion op, yes you can root. Everything you need is in that thread.
Sent from my SCH-I535 using Tapatalk 2
So did the fone did take the 4.3 OTA
Yes it did take the new update didnt.think anything about it till now
Sent from my SCH-I605 using xda app-developers app
xopterdoc415 said:
Yes it did take the new update didnt.think anything about it till now
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Nothing you can do right now as far as custom rom. Currently a few folks are working on a patch for safestrap in order to flash custom rom (currently only able to flash custom TW rom). You can follow this http://forum.xda-developers.com/showthread.php?t=2618887 to see the status.
Much appreciated...lije I saud im new to this so I'm a lil hard headed...ty everyone that has helped the info was helpful
Sent from my SCH-I605 using xda app-developers app
Now final question...can I root this phone just root it even though I cannot flash the cyanogenmod??
Sent from my SCH-I605 using xda app-developers app
xopterdoc415 said:
Now final question...can I root this phone just root it even though I cannot flash the cyanogenmod??
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
yes you can root the 4.3 http://forum.xda-developers.com/showthread.php?t=2565758 pretty simple.
Thank yall kindly if I cannot do cyanogenmod I can at least root...good sh...stuff..ty
Sent from my SCH-I605 using xda app-developers app
I have just received a replacement phone. I have gone about the ways I rooted previously and none of them are working. This did NOT come with 4.3 from the factory, and the 4.3 update is not installed. I reverted back to stock from android recovery, so 4.0.4 is on there right now. But no matter what I do, whether it's the one click method, the GS3 toolkit format, or manually trying to gain root through recovery, nothing works. On the "downloading" screen that you need during use of ODIN, it says "SECURE CHECK FAIL", and it'll either have "boot" after it, or "kernel". Anyone have any ideas? As of this moment I have no working phone. Looking for some help asap. Thank you guys.
xgerryx said:
I have just received a replacement phone. I have gone about the ways I rooted previously and none of them are working. This did NOT come with 4.3 from the factory, and the 4.3 update is not installed. I reverted back to stock from android recovery, so 4.0.4 is on there right now. But no matter what I do, whether it's the one click method, the GS3 toolkit format, or manually trying to gain root through recovery, nothing works. On the "downloading" screen that you need during use of ODIN, it says "SECURE CHECK FAIL", and it'll either have "boot" after it, or "kernel". Anyone have any ideas? As of this moment I have no working phone. Looking for some help asap. Thank you guys.
Click to expand...
Click to collapse
Try to Odin flash factory 4.1.2 and see if the secure check turn to "enabled". If it's then try to root again.
I just Odin flashed a stock 4.1.2 ROM actually. It's booting up normally now. It honestly seems like they added a layer of protection on the newly distributed handsets. I will try to go through the normal 1 click method again and see if that works. How would I check if the secure check is still enabled?
Actually, no, it's still 4.0.4 but I'm going to try the same thing just with a different 1 click method.
Looks like the really old way worked. With the ez-unlock and ez-recovery. I had to completely demolish what was there when it was sent to me, though. So anyone who gets a replacement, the best bet is to flash a fresh 4.1.2 ROM or 4.0.4 ROM immediately, boot back up and go from there.
xgerryx said:
I just Odin flashed a stock 4.1.2 ROM actually. It's booting up normally now. It honestly seems like they added a layer of protection on the newly distributed handsets. I will try to go through the normal 1 click method again and see if that works. How would I check if the secure check is still enabled?
Actually, no, it's still 4.0.4 but I'm going to try the same thing just with a different 1 click method.
Looks like the really old way worked. With the ez-unlock and ez-recovery. I had to completely demolish what was there when it was sent to me, though. So anyone who gets a replacement, the best bet is to flash a fresh 4.1.2 ROM or 4.0.4 ROM immediately, boot back up and go from there.
Click to expand...
Click to collapse
Nice! just ignore the security check enable statement, I misread your post..