After a lot of tries I have successfully flashed JaggyDzire V2.I want to make sure that the Mount2SD (flashable Zip) work on JaggyDzire V2?
Anybody using it with Mount2SD??
Lay_13591 said:
After a lot of tries I have successfully flashed JaggyDzire V2.I want to make sure that the Mount2SD (flashable Zip) work on JaggyDzire V2?
Anybody using it with Mount2SD??
Click to expand...
Click to collapse
Hi bro.
Considering JaggDzire is a Sense 4.0a based ROM , you cannot flash a memory increasing script( you can but it will mess things up and maybe you will end in bootloop ). This is cause Sense 4.0a has its own memory increasing script which it uses to move its system apps to sd ( as 235 of NAND memory is not enough for it ). So if you want more internal memory increase your SD partition size and reflash.
Related
Hi ,
I bought new htc explorer and successfully rooted it.
I am tring to increase my internal memory by this script : http://forum.xda-developers.com/showthread.php?t=1932874
i just partitioned my 8gb card to 4,4 both primary , 1 fat32 and 1 is ex2.
I implememted all ways, installed and all terminal steps worked fine.
But my internal storage didnt increase sill 9mb remaining , but yes SD card is showing the 4 gb storage but how i can attach the other 4gb storage to internal memory
i also tried 2nd options also ,flash that recovery file after 1st options but both are not working although my explorer is rooted. In boot mode it says installed successfuly but internal memory donot increase.
Then i came to know that i hadnot enable init.support in the stock rom as above process requires this , so i tried this step
http://forum.xda-developers.com/showthread.php?t=1422061
and getting error :
exit value : 0
stdout : M2SD has already been loaded. Canceling Second Run.
so how i can enable init support in my pico to execute the script to increase memory
Thanks
Dude the best advice i can give you is to try a custom stock based rom like Nextgen 1.5. It has m2sd preconfigered so you wont have any probs.
Sent from HTC Explorer powered by Nextgen v1.5
make a setup of my official rom
satvik7star said:
Dude the best advice i can give you is to try a custom stock based rom like Nextgen 1.5. It has m2sd preconfigered so you wont have any probs.
Sent from HTC Explorer powered by Nextgen v1.5
Click to expand...
Click to collapse
Can you tell me how i can make a setup of my official rom so that whenever i want to install the official (stock)rom again after custom rom. I can easily transfer.
This Rom you shown is using android 2.3. I am thinking to shift to 4.0. can you please tell me disadvantage if there any also can it support ? and work fine.
Thank You
shanalikhan said:
Can you tell me how i can make a setup of my official rom so that whenever i want to install the official (stock)rom again after custom rom. I can easily transfer.
This Rom you shown is using android 2.3. I am thinking to shift to 4.0. can you please tell me disadvantage if there any also can it support ? and work fine.
Thank You
Click to expand...
Click to collapse
1. Go to recovery then backup & restore then select backup
It will create clockworkmod folder on your sdcard and you can restore it by using the restore option.
Make sure u hav suff. space on sd card. I make with > 1gb free
2. Its your choice. If you want the stock exp.then go with the rom i told. For me HTC Sense is very imp. so m sticking wid nextgen.If you want something new then go wid CM9 or 10 or whatever rom.
Personal exp.- I just missed sense after switching to a non-sense rom
Hope it helps
Sent from HTC Explorer powered by Nextgen v1.5
I have tried the INT2EXT+ for CM10 as well as Mount2sd for increasing internal memory in the new CM10 Build 3 but non seems to be working.I have everything i.e. Busy box as well as init.d support which is required for Mount2SD but every time I flash it, it gets stuck on the HTC logo.And, INT2EXT+ isn't working as well.The phone does boot properply in INT2EXT+ but doesn't show any increase in memory.
Do you have an EXT partition on your SD card?
SifJar said:
Do you have an EXT partition on your SD card?
Click to expand...
Click to collapse
Yes I do.Should I try re-partitioning it and make partition again and than try Mount2SD again? Not only me few others are also having problems in increasing the internal memory in CM10 beta 3
I'd say you maybe should try formatting the card again in recovery and making ext partition while doing so, in case there is a problem with your partition. It's probably something else entirely, but may as well completely eliminate this option. (Of course, doing this will wipe everything from your SD card; back it up first).
M2SD working like awsome
M2Sd working like awsome in my Cm10beta3 as well as CM9.1build11 nothing seems to be lag...
which m2sd u followed and how u make a partition on ur sd card..?
Lay_13591 said:
I have tried the INT2EXT+ for CM10 as well as Mount2sd for increasing internal memory in the new CM10 Build 3 but non seems to be working.I have everything i.e. Busy box as well as init.d support which is required for Mount2SD but every time I flash it, it gets stuck on the HTC logo.And, INT2EXT+ isn't working as well.The phone does boot properply in INT2EXT+ but doesn't show any increase in memory.
Click to expand...
Click to collapse
hey i'm also on cm10 beta 3, and tried flashing int2ext zip from recovery but it doesnt work ssays process aborted after a while...so i extracted my zip file in pc itself and copied 40int2ext file located in system/etc/init.din the Zip to same location in phone's system and then reboot normally...worked for me
The ROM with the script....
Go here : http://www.mediafire.com/?w5hbhl9795syl0s
The file is the Cyanogenmod 10 beta #3 by liverpool-fan.
I got permission from him and have also posted in my blog, along with installation details.
,,,,
try using Yannou's recovery instead of CWM......CWM has problems with mounting sd partition...
had same problem..........worked for me.... :fingers-crossed:
hit thanks if i helped :good:
this should work
Lay_13591 said:
Yes I do.Should I try re-partitioning it and make partition again and than try Mount2SD again? Not only me few others are also having problems in increasing the internal memory in CM10 beta 3
Click to expand...
Click to collapse
try using Ungaze script.. it worked for me.. http://forum.xda-developers.com/showthread.php?t=1874121
I just Downloaded a rom wih htc sense 4.0a which had apps in extfolder in its zip file...... but after installing it io am not able to pass the htc quietly brilliant screen.....and not only this rom but roms like bulletsense final and htc sence 5.0 also has same problem...Can any1 Help?
Also I have partiioned my sd card using cwm recovery and other rom line cm10.1 supports and runs well plz help:crying::crying::crying:
ankrocks said:
I just Downloaded a rom wih htc sense 4.0a which had apps in extfolder in its zip file...... but after installing it io am not able to pass the htc quietly brilliant screen.....and not only this rom but roms like bulletsense final and htc sence 5.0 also has same problem...Can any1 Help?
Also I have partiioned my sd card using cwm recovery and other rom line cm10.1 supports and runs well plz help:crying::crying::crying:
Click to expand...
Click to collapse
Have u partitioned any kind of ext2 or ext3 or other formats?
Does ur rom use any init scripts that link apps to the secondary partition?
Hit thanks rather than typing it
i am new as user in forum but an avid reader of many threads regarding PICO, firstly i am thanking all the developers here as only for their post am able to experiment with my excellent PICO.
here is my dissatisfactions: 1. sense 5 build 5 installed nicely but internal memory still showing 150mb. And with the installation of apps it is decreasing gradually. i manually have to transferred the apps to usb storage wherever applicable.
pertinent here to say that i have ported many sense roms and cm9 as well and my PICO ran nicely, i loved sense rom and currently staying with it.
i have gone through many threads and learned that internal memory will not decrease as i have made a sd-ext partition of 2 gb out of my 8 gb sd card. it was done through cwn recovery6 of nannou90. previously i had ported sense 4.0 and it was showing 2gb internal memory nicely.
in sense 5 when installing mount2sd it was sending the apps to sd but after restart it was hanging on boot time animation.
just tell me me what is happening and how i will see sd-ext size as internal memory as like as sense 4.0 rom?
however i had unlocked my pico as per the instructions shown in htc dev and facing no problem except this one as mentioned above.
In sense 5 data is in internal to get more performance,use fly script to move data to sd-ext
Or use diff sense Rom with cute prince overclock method
Sent from my HTC Explorer A310e
will mount2sd work with sense 5 EX build 5
m2sd only used GB or CM or MIUI etc... bcuz its support only small size memory near 150mb ..
sense 5 EX has different script bcuz its default installation around 350mb . thts why sense 4.0 had mv2ext or a2ext or flyscript.
thts why we dont use m2sd in sense 4.0
I am using htc explorer pico.Recently i installed flyrom v4 redefined Rom in it.i did not remove the previous partition of 250mb ext2 file system in it.it is of 4gb card.now i am unable to install any apps,cause its showing no space to install even though i have enough memory in internal storage.
How install apps in my device now and also should i install patch3?
venkatsai00 said:
I am using htc explorer pico.Recently i installed flyrom v4 redefined Rom in it.i did not remove the previous partition of 250mb ext2 file system in it.it is of 4gb card.now i am unable to install any apps,cause its showing no space to install even though i have enough memory in internal storage.
How install apps in my device now and also should i install patch3?
Click to expand...
Click to collapse
if you don't have much knowlage about partitions.. i would suggest you to flash a stock rom and then again flash your desired custom rom
btw check out my signature for AWESOME SMARTPHONE LIFE HACKS