Related
For the past week I have noticed a strange thing on my S2, in when I try to take an HR (Heart Rate) reading in which the app and Widget have disappeared!
If I restart the S2, then everything is back to normal, I have a Galaxy Note 4 (T-Mobile) with an SM-R730T T-Mobile S2 smartwatch.
I have also noticed in when I go to the Samsung Gear app Store in that it's not on the applications list viewed on the Galaxy Note 4?
Anyone see this happen before?, I've searched the Threads hoping to find a similar problem... but no.
If I can't figure this out I will just do a Hard Reset on both Galaxy Note 4 & S2...
But would prefer to identify this problem with a reason beforehand in especially if it becomes seen again with other users?
Hello from Bulgaria.Some one have had a problem with 4g network.Samsung S7 when he was lte \ 3g \ 2g after 30-40 minutes , scope disappears and receives a missed call notification.The problem gone after restart the device and after 30-40 minutes is same situation.If a phone is an 3g\2g no problems.
Sorry for my bad english.
Same here
My cousin bought an S7 Edge, but it had the same problems as listed. She then proceeded to change the phone, yet the other S7 Edge had the same problem. What could be the solution to this problem, and what caused it?
I change 3 phone 2 black and now give to me gold,for now i don't have a problem with the gold piece. Everything work fine.
Gachev said:
I change 3 phone 2 black and now give to me gold,for now i don't have a problem with the gold piece. Everything work fine.
Click to expand...
Click to collapse
We changed two gold ones, awaiting for the third. Problem seems to be persistent.
Hi!
Go to settings and find your APN-settings. Remove IPv6 and save it. Then everything should work fine.
I'm having the same problem. I'm sitting beside my friend with his ip6s+ and he's not having trouble connecting with the lte. just saying that this might not be just a network problem.
I've read about multiple people, including me having this issue, for some the APN IPv4 switch seems to work, but not for everyone. So what is this? Is it related to the phone hardware or software? Or is it a network problem? And will it be fixed? As this is starting to irritate me a bit..
Many People in my country (indonesia) is having similar problem. The signal somehow stuck in 3g. Forcing it to use LTE only using the app "4G LTE Switch) makes the signal gone, emergency only mode. Only a reboot would bring 4g back.
However it only acts up when using one specific mobile provider (telkomsel). Switching to my second sim, also by the same provider, didnt help. But if I switched to another provider, the problem doesnt happen.
Widespread issue in Germany as well. It's carrier independent. Had to exchange one unit. The new S7 Edge I got works fine so far, but has a pink hue on the display. Samsung QA! -.-
Any solutions or updates?
Solved?!
Hi,
I had the same problem in bulgaria with telenor.
Yesterday i got an update on my s7 edge to XXU1APCH and it seems to solve it.
This night it stayed connected. Normally i had the no service available in the morning.
Anybody else see the same?
heinda said:
Hi,
I had the same problem in bulgaria with telenor.
Yesterday i got an update on my s7 edge to XXU1APCH and it seems to solve it.
This night it stayed connected. Normally i had the no service available in the morning.
Anybody else see the same?
Click to expand...
Click to collapse
Havent got any updates here in my country.
Would u be so kind to upload the firmware using this method
here
and
here
heinda said:
Hi,
I had the same problem in bulgaria with telenor.
Yesterday i got an update on my s7 edge to XXU1APCH and it seems to solve it.
This night it stayed connected. Normally i had the no service available in the morning.
Anybody else see the same?
Click to expand...
Click to collapse
Downloaded bulgarian firmware,, XXU1APC8 is the only one available. Tried to check for update, nothing yet to xxu1apch...
Update:
Emailed Indonesian Samsung Support, they came up with a temporary solution:
go to phone, dial *#9900#
select debug level disable/low
change to mid
wait for phone to reboot.
2 hours past no signal lost yet
update: 3rd hour signal gone again
hi,
has anyone found a solution for the problem above?
in my case I have really slow internet (mobile data) on 2,3 or 4G, it's like it freezes when I try to open a page
when I connect to 4G it maybe works for a second and then nothing else, it's like 2G, very slow (wifi works normal)
can it be hardware problem? I already cleared cache and reset the phone, but it's still the same..
At me the phone can not change back to 2G from LTE, if 3G network is unavailable.
If I use LTE/3G/2G option and somewhere is not 3G network I can't receive or make voice calls.
Phone only works with 3G/2G option in network mode.
But in this case I only can use edge if somewhere only 2G and 4G networks are available.
If I use LTE network, the phone doesn't receive incoming calls.
I bought my samsung s7 gold one month ago in Lebanon (Middle East). I faced exactly the same problem, I couldn't receive any phone calls. Went to the store and they told me to switch from LTE/4G to 3G. Now my phone is always on 3G and working ok so far. But I can't put it on 4G !!!
get new simcard will fixed problem
Hi, is there a solution to this?
got info that there is a patching from samsung for this issue but since i am using custom rom, i cannot confirm this.
anyone has any update?
Same problem! I'm from Mexico and i just bought my pink s7 Edge on sunday, i've been going everyday to the carrier store and yesterday they finally gave me another one but im having the same issue! I can't take it anymore i don't know what should I do Maybe all the pink ones have the same problem? They have already changed my SIM Card, i have tried with another one and it still happens
This sounds very similar to the LTE problem on the Nexus 6P I wonder if it is actually the same problem.
Did anyone get a new Gear S3 update this morning? According to Sammobile, Samsung released a new update this morning. I didn't get it on mine yet.
No update for me either (TMobile). My G S3 Frontier (SM-R765T) says my current version is: R765TUVU1APJ9
My AT&T SM-R765A says R765AUCU1APJ8. Does anyone know what the keyboard does when you click on the software version? on my watch a keyboard pops up. Not sure what you're supposed to do there?
I haven't gotten it on my WiFi only model, but saw that it had two tweaks - fixing a time zone in Russia, and "improved GPS performance".
http://www.phonearena.com/news/Samsung-Gear-S3-gets-a-firmware-update-in-the-US_id88441
I haven't get the update too
Got my update on my WiFi Frontier - although it's PK7, not PK6...
Just manually checked for updates, PK7 is now being installed.
Can you notice any new features with pk7?
rob77 said:
Can you notice any new features with pk7?
Click to expand...
Click to collapse
Must have been some last minute adjustment to the PK6 update, because it said the same thing - just fixing some Russian time zone and improving GPS. Nothing noticeable.
arl16 said:
Must have been some last minute adjustment to the PK6 update, because it said the same thing - just fixing some Russian time zone and improving GPS. Nothing noticeable.
Click to expand...
Click to collapse
Thanks
Am I correct in assuming that carrier specific LTE versions (T Mobile in my case) will be delayed pending carrier approval etc...
matguard said:
Am I correct in assuming that carrier specific LTE versions (T Mobile in my case) will be delayed pending carrier approval etc...
Click to expand...
Click to collapse
Yes, AT&T and T-Mobile will have separate updates. It was the same way with the Gear S2's, the builds are different for each carrier.
Sword Fish said:
Did anyone get a new Gear S3 update this morning? According to Sammobile, Samsung released a new update this morning. I didn't get it on mine yet.
Click to expand...
Click to collapse
No update yet in Australia (Frontier Bluetooth/WiFi)
Did anyone install the new PK7 watch update on their Gear S3? Any issues with AOD? Like AOD not working or turning off despite the AOD setting being on?
Sent from my SM-G935P using Tapatalk
Verizon offered me a $100 off code for the gear S3. So I'd be able to get it off contract for $300 before fees. I already have the gear S3 with only wifi. Should I consider it? I'm really curious as to whether anyone has tried using it as a standalone device and if it is really practical.
nascar48 said:
Verizon offered me a $100 off code for the gear S3. So I'd be able to get it off contract for $300 before fees. I already have the gear S3 with only wifi. Should I consider it? I'm really curious as to whether anyone has tried using it as a standalone device and if it is really practical.
Click to expand...
Click to collapse
It should work fine only thing you'll have to worry about is updates. I have the WiFi gear s3 classic so I only have to wait for samsung to release an update to the US while on carrier you probably have to wait for them to send out the update. Of there than that every thing else should work fine
zune70 said:
It should work fine only thing you'll have to worry about is updates. I have the WiFi gear s3 classic so I only have to wait for samsung to release an update to the US while on carrier you probably have to wait for them to send out the update. Of there than that every thing else should work fine
Click to expand...
Click to collapse
Except S voice doesn't work like it should after it's last update which I think has been about two months ago.
droidrev71 said:
Except S voice doesn't work like it should after it's last update which I think has been about two months ago.
Click to expand...
Click to collapse
S voice hasn't worked properly since launch for a lot of people so that's not a problem. I have problems with my Galaxy s5 too
zune70 said:
S voice hasn't worked properly since launch for a lot of people so that's not a problem. I have problems with my Galaxy s5 too
Click to expand...
Click to collapse
I just bought the watch yesterday and S Voice was functioning just fine. Then I took a software update and it killed half the functionality. I can't reply to text messages with S voice unless I change my language to English UK. Then Everytime she talks to me she has an accent. There's a thread that many others have shared the same exact issue. I'm going to be returning mine. I love it except for S voice.
droidrev71 said:
I just bought the watch yesterday and S Voice was functioning just fine. Then I took a software update and it killed half the functionality. I can't reply to text messages with S voice unless I change my language to English UK. Then Everytime she talks to me she has an accent. There's a thread that many others have shared the same exact issue. I'm going to be returning mine. I love it except for S voice.
Click to expand...
Click to collapse
Yeah in my opinion s voice was going to be crappy from before the watch got launched. S voice in general is crap. It needs to updated to Bixby in the future hopefully that will help if not then a different voice system
Software version: R760XXU2CRK2/R760OXA2CRK2
Tizen: 3.0.0.2
Size: 10.17 MB
Change Log:
Update: R760XXU2CRK2
What's new
Fixed an issue of sudden battery drain when connected to certain smartphone models.
Improved reliability of downloading app from
Old Updates
Update: R760XXU2CRH1
What's new
Improved battery charging algorithm and stability.
Security enhancements for features/apps in Gear S3.
Update: R760XXU2CRG3
What's new
Improved battery charging algorithm and stability.
Update: R760XXU2CRE3
What's new
Visual Accessibility Feature Improvement
Added feature to answer incoming call by Rotating Bezel.
I got same..... Korea version.... others soon...
Code:
key[error] val[-27] error message: :Side loading error
key[end] val[fail]
Looks to me they have again increased f%$ing Security...
Best Regards
crunchybutternut said:
I received a new update for my Gear S3 Frontier this morning.
The new Software version is R760XXU2CRE3, but still Tizen 3.0.0.2.
[/LIST]
Click to expand...
Click to collapse
XAR
Has anyone gotten the new 'rotate bezel to answer calls' function to work? I have a regular wifi S3, not the LTE one... I can't find a setting on the watch or in the gear app.
Aside from that, so far the update doesn't seem to screw anything up (so far)
Where can I download it to put it by netodin ?? I appreciate it.
Change your CSC to XAR, make the update than revert to your CSC.
badmania98 said:
Change your CSC to XAR, make the update than revert to your CSC.
Click to expand...
Click to collapse
This is not for the TMobile Frontier, it's still on CRD2.
This is not for the TMobile Frontier, it's still on CRD2.
Click to expand...
Click to collapse
Important is to differ between LTE devices... most in USA, Singapore, Korea, New Zealand... nowhere else...
Examples...
Gear S3 Frontier LTE series:
USA
Code:
SM-R765A ATT USA -> ATT
SM-R765T TMB USA ->T-Mobile
SM-R765V VZW USA ->Verizon
Korea:
SM-R765 ->
Code:
SM-R765L
SM-R765K
SM-R765S
Singapore:
Code:
SM-R765F
New Z.
Code:
SM-R765N
+++++++ PLUS Classic range... SM-R775...
But this Thread is SM-R760 related... without eSIM... without LTE...
Also SM-R770 received R770XXU2CRE3
SM-R760 and SM-R770 are same family/group...
LTE devices are """different""" and have """different" Firmware with """different""" funny names...
Also LTE devices receive new Firmware update AFTER SM-R760/SM-R770...
NO idea why... ask Samsung...
For me LTE devices look more expensive as SM-R760/SM-R770...
Only as hint.
Best Regards
Edit 1.
SM-R760 and SM-R770 related...
Like last time...
They launched this Firmware only for 3 CSC/Sales Code:
Code:
KOO Korea
XAC
XAR USA
All other have to wait...
No idea how long... 1 week maybe...
Avail211 said:
Has anyone gotten the new 'rotate bezel to answer calls' function to work? I have a regular wifi S3, not the LTE one... I can't find a setting on the watch or in the gear app.
Aside from that, so far the update doesn't seem to screw anything up (so far)
Click to expand...
Click to collapse
doesn't seem to be a setting for it.... it just works when you turn the bezel
edwardob said:
doesn't seem to be a setting for it.... it just works when you turn the bezel
Click to expand...
Click to collapse
Gotcha, tested it out a min ago, definitely just turn it clockwise a couple times to answer!
Works for me, maybe half turn and it answers or hangs up. My battery life on this thing is pathetic and I can't even use it anymore. Hard reset, everything off except BT, chronograph+ watch face and nothing else loaded. Did this firmware in hopes but off the charger at 7am and by 4pm it's dead.
edwardob said:
doesn't seem to be a setting for it.... it just works when you turn the bezel
Click to expand...
Click to collapse
Sent from my SM-G965U using Tapatalk
Any link to download this rom?
R760XXU2CRE3
I have had this setting since i bought the watch....nothing new here
wait. this answer phone has been on the wifi frontier since day 1. I've done it forever. wtf are they talking about?
Sent from my Pixel 2 using Tapatalk
Is there anyway to downgrade from this update???this just [email protected]#ed up the wgt sideloading for gear s3....
Avail211 said:
Has anyone gotten the new 'rotate bezel to answer calls' function to work? I have a regular wifi S3, not the LTE one... I can't find a setting on the watch or in the gear app.
Aside from that, so far the update doesn't seem to screw anything up (so far)
Click to expand...
Click to collapse
A bit confused as this feature worked for me by default when I bought the watch, any clue what the hell they are talking about?
I found new roms at https://easy-firmware.com/home/browse/category/id/18006/ but didn't test them.
artur.r said:
I found new roms at https://easy-firmware.com/home/browse/category/id/18006/ but didn't test them.
Click to expand...
Click to collapse
you have to subscribe prior payment to be able to download the rom. ???
CRE3 is now for nearly all CSC/Sales Codes available...
Only 3 or 4 missing from over 80...
Best Regards