Database Info

(OC)Official GingerBread Kernel/**Multitouch fix added Aug 08**/Ring no Fade updated

********* OFFICIAL FOR USE ONLY ON GINGERBREAD ***************
Special thanks to PaoloM70.
Personal Thanks to Andy, Mik_os, Franciscofranco, Ciaox, Noejn and all other devs.
AmonRA to flash it with the need to disable the verification of signatures.
Overclocking
Smartass
Smoothass
Cifs
Supports EXT4
+upstream to 2.6.35.13
+oc, interactive, smartass, smoothass, cifs, ext4
+governor added SavagedZen
+autogroup scheduler (the patch of 200 lines)
+ smoothass smartass with a capped rate (standby) to set minimum
V3 Kernel -Old kernel:
ADB Bugfix for device
Reconfigured various kernel parameters (For better power management, CPU profiles)
-Added for the inversion axes Sippola in the new touch screen driver.
-Simple-inserted I / O scheduler (sio)
-Included various other patches 5-6
-Removed references-debug (smaller kernels)
-Small fix to reduce the impact on the CPU more pressure on the display (you can check with Neocore first ... the difference came in 8-well 9fps now settles down to 2-3fps)
******Updated 25 July*********
Magazine-routine to increase the stability and overclocking performance, cameraflick is absent up to 729mhz
Touch-fix which decreases the occupation of the CPU when you press your finger on the display (should no longer have the lag that had the first version of V4 (I hope))
Magazines-and reinsert all the previous patches (66 patches in total)
Inserted by the kernel-2.6.36 backport of block, and mtd workque
Backport-inserted by the kernel 3.0rc6 and cpufreq of cpuidle
http://www.mediafire.com/?g8r37pzsr3ig21j
+same kernel but without the fix for employment cpu (maybe better in the scroll lag if you have one) **No touch fix kernel***
http://www.mediafire.com/?bed0ht9kcz0071c
******Updated 08 Aug*********
Touch V6 2.6.35.14
V5-like, but updated to version 2.6.35.14
-Added 2.6.36 kernel backported from the i2c
-Support Module tun.ko
-Vsync enabled
http://www.mediafire.com/?otpne0w1v8bhnp8
If you want to try the version NoTouch kernel
http://www.mediafire.com/?4wuiscjcu5xal58
After flashing, wipe cache and davlik.
If you have a2sd then run the following in terminal:
su
a2sd cachesd
The phone will reboot automatically.
Download Ringing with No fade :Now supports Gingerbread 2.3.3 :
http://www.mediafire.com/?1xqcc0jppl2w9ic
Flash and enjoy
To know more the original idea, please visit the thread here :
Special Thanks to Januka for the idea.
For devs :
I/Paolo doesn't have a repository, So its uploaded here :
Kernel Ginger Source
http://d-h.st/jvn
u only need to change one line in Makefile
at line 193 change from
Code:
CROSS_COMPILE ?= /home/paolo/x-tools/arm-spica-linux-uclibcgnueabi/bin/arm-spica-linux-uclibcgnueabi- #CROSS_COMPILE ?= arm-eabi-
to
Code:
#CROSS_COMPILE ?= /home/paolo/x-tools/arm-spica-linux-uclibcgnueabi/bin/arm-spica-linux-uclibcgnueabi- CROSS_COMPILE ?= arm-eabi-

Yes, I know I should use search, but please, can anyone explain to me how do smartass and smoothass work in comparison to, for example, conservative and ondemand?
And massive thanks to you mansirawat!

If you already know that you should use the search function, maybe you don't know HOW to use it...
Here's a "tutorial": http://lmgtfy.com/?q=android+governors
Otherwise, you're just plain lazy... which one is it?

Ciaox should see this thread , he is waiting for GB OC Kernel
P.S : Thank you for the Kernel

Otherwise, you prefer wasting perfectly good post space in order to lecture me. Just like half the members of XDA. And the fact that you supposedly come from Romania as well just shows...nah, why bring that up here, all foreigners know it already.

Great! Awesome! Pure awesome!
Thanks a lot!

Stock rooted GB with this kernel (652/320)-> 1152 in quadrant. I don't care too much about those points, but my phone is smoother.

Working fine with void forever...yeah its smooth ...got 2020 in quadrant at 806 MHz
Sent from my LG-P500 using XDA App

do i have to flash a new baseband before flashing this on any custom rom? thanks

Flashed it,let's see!
Thanks!

Best!
Great!
Awesome!
Pure awesome!

mansirawat said:
********* OFFICIAL FOR USE ONLY ON GINGERBREAD ***************
Special thanks to PaoloM70.
Overclocking
Smartass
Smoothass
Cifs
Doesn't support EXT4
Click to expand...
Click to collapse
Hey mansi hows the performance??? If its good then it will be included in my new ROM.
CWM can also be used to flash this zip. Tested(CWM 3.1.0.0) and worked.

sajjan said:
Working fine with void forever...yeah its smooth ...got 2020 in quadrant at 806 MHz
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
Why would you use this on a custom rom? We have Francisco's kernels for that.

devlin2427 said:
Why would you use this on a custom rom? We have Francisco's kernels for that.
Click to expand...
Click to collapse
its because krant,andy,mik's kernel are made of CM7 sources LG's are diff.
If you flash franco's kernel it will mk ur phone choppy. but you can try. if francos doesn't work you can flash this.....

Well I tried it out of curiousity ....and if not better it's definitely at par.....I still have to check battery life....
Sent from my LG-P500 using XDA App

cyber_avijit said:
its because krant,andy,mik's kernel are made of CM7 sources LG's are diff.
If you flash franco's kernel it will mk ur phone choppy. but you can try. if francos doesn't work you can flash this.....
Click to expand...
Click to collapse
does this kernel require a new baseband?thanks

roi14 said:
does this kernel require a new baseband?thanks
Click to expand...
Click to collapse
Yes, of course.

cyber_avijit said:
its because krant,andy,mik's kernel are made of CM7 sources LG's are diff.
If you flash franco's kernel it will mk ur phone choppy. but you can try. if francos doesn't work you can flash this.....
Click to expand...
Click to collapse
I'm afraid you didn't understand my question. I was asking why would he flash this kernel instead of Francisco's on void#forever.

devlin2427 said:
I'm afraid you didn't understand my question. I was asking why would he flash this kernel instead of Francisco's on void#forever.
Click to expand...
Click to collapse
ya you can use franco's kernel on any custom ROM other then those which are built from official 2.3.3

doktornotor said:
Yes, of course.
Click to expand...
Click to collapse
No. kernels have nothing to do with baseband. I flashed on v20g and its improved performance and another guy flashed on void forever and it improved performance.

[kernel][3.0.46][ics] •∞ CYMBALINE •∞ RD04 •∞ 2.8 •∞ [16-OCT-2012]

[kernel][3.0.46][ics] •∞ CYMBALINE •∞ RD04 •∞ 2.8 •∞ [16-OCT-2012]
PLEASE READ THE ENTIRE POST #1 and POST #2, UNDERSTAND, READ IT AGAIN, BEFORE YOU DECIDE TO FLASH.
* THIS KERNEL IS ONLY FOR ICS (Android 4.0.x) TouchWiz (Samsung/ATT ICS releases, i.e any UCLF6, UCLF5, UXLF3, UCLD2, UCALC2) ROMS. It is NOT for after market ROMS like CyanogenMod or AOKP.
* The ONLY device that it has been tested is ATT SGH-I727 and Rogers SGH-I727R.
* CYMBALINE 2.X is a complete overhaul from 1.X series, if you have been using 1.X series, I would strongly recommend to upgrade to 2.X series.
Click to expand...
Click to collapse
DISCLAIMER
Click to expand...
Click to collapse
KERNEL FLASHING, OVERCLOCKING, UNDERVOLTING, ETC CAN POTENTIALLY DAMAGE YOUR PHONE. YOU ARE SOLELY RESPONSIBLE FOR FLASHING THIS KERNEL.
​
TUNING SCRIPTS
Click to expand...
Click to collapse
For Gov/OC/UV/UC tuning scripts for various governors. If you don't like to use an app (as lot of them cannot do fine grained tuning) you would like to use init scripts, then please see @ReedX50v scripts in this thread. The only requirement is "busybox run-parts init.d supports", most custom ROM's with modified Ramdisk kernel image should have that built-in. If it not, then bang your ROM author to provide one.
* For Cymbaline 2.6 and above (any ramdisk version, i.e. any of the RDNN) use the information in following post #574. You might also read the post #249, for some background information. Please thanks ReedX50v.
* For Cymbaline 2.5 and BELOW (any ramdisk version). use the scripts (again thank Reed50Xv). Use the scripts from the following post #249.
​
​
FEATURES/CHANGELOG
Click to expand...
Click to collapse
You can use 3rd Party APPS for CPU and Voltage Control. For Voltage, it is using the Faux VDD tables, so the app MUST be able to understand that. (See ADDONS section below).
[RD04][2.8]
updated to linux 3.0.46 upstream.
Experimental, ported CM10 bln with blink support (updates your lights lib in ROM). Not sure how great this is but feedback is appreciated.
WiFi sensitivity restored to stock.
[RD04][2.7]
updated to linux 3.0.42 upstream.
Ramdisk updated to support boot sounds. (remove /system/etc/PowerOn.ogg if you don't want it)
merged to latest (09/09/2012) CAF relevant changes.
[RD03][2.6]
Changed Ramdisk (def. governor changed from "ondemand_sammy" to "ondemand".
updated to linux 3.0.40 upstream.
updated WiFi stack to 1.15.55
Skipped internal releases 2.4 and 2.5.
FIX: Now overclock should be fully supported.
[RD02][2.3] Minor release, only one version now. Hacked to ensure that the max. boot ramp up is only 1.566GHz. If your phone can't handle that, sorry return it .
Added two more governors as modules : "savagedzen" and "hotplug"
Unified release, hack in place to not ramp up to the MAX allowed i.e. (1.836Ghz) so all phones should boot, as the boot max is set to 1.566GHz.
merged some bt code from Cymbaline 1.5 branch.
[RD02-2.2] Please note RAMDISK change, see below
Samsung ondemand governor moved as "ondemand_sammy", did this so that I can merge the standard ondemand and mods w/o creating a merge headache. Due, to this, the SAMMY settings in the RAMDISK modified to reflect the new name.
using linux ondemand with faux mods. (thanks faux123)
added faux's intellidemand as a built-in gov, since I like it (thanks faux123).
reverted the wi-fi optimization, which was causing tethering issues. (hopefully this is fixed)
pre-emptive strike: merged all Govs from 1.5. Please don't complain that I am missing one. As usual all these are in /system/lib/modules. so you would need to "insmod" (see ReedX50v scripts for samples). Here is the remaining ones (please see RD01-2.1 ChangeLog for others)
Code:
/system/lib/modules/cpufreq_brazilianwax.ko
/system/lib/modules/cpufreq_lionheart.ko
/system/lib/modules/cpufreq_lulzactive.ko
/system/lib/modules/cpufreq_ondemandx.ko
/system/lib/modules/cpufreq_wheatley.ko
[RD01-2.1]
BLN Fix: reverted 2.0 changes, should work now
Providing two CWM flashable zips. One OC to 1.8366GHz and another with OC Capped at 1.566GHz.
Upped the voltage to 1350mV as per ReedX50v testing results and recommendation (hit his thanks button).
IMPORTANT: ALL CUSTOM GOVERNORS are compiled a Kernel Modules. Please use init script to enable the ones you want. I have done this so as to eliminate any interference from them.
This version has the following Governors: (Please see Post #420)
Code:
/system/lib/modules/cpufreq_adaptive.ko
/system/lib/modules/cpufreq_badass.ko
/system/lib/modules/cpufreq_lagfree.ko
/system/lib/modules/cpufreq_lazy.ko
/system/lib/modules/cpufreq_pegasusq.ko
/system/lib/modules/cpufreq_smartass2.ko
[RD01-2.0] Major version change. REMOVED SOME GOVERNORS, please restore to stock ondemand before flashing (i.e. disable init scripts or apply on boot settings in whatever app you are using).
Updated to upstream Kernel 3.0.38
Bunch of NetFilter kernel modules in /system/lib/modules for the interested users.
I have removed some governors, please reset to default governor "ondemand", before flashing.
cherry-picked key changes from CAF.
GPU OC (NOTE: please use sysfs interface to change the frequency the default is stock values, see post #2)
3D Mode: 320000000, 300000000, 266667000, 228571000, 200000000, 177778000, 27000000
2D Mode: 266667000, 228571000, 200000000, 160000000, 96000000, 27000000
Cherry Picked various bits from Samsung Code released for our device.
CPU OC: 192KHz - 186300KHz.
Cleaned up BLN code.
Added some WiFi fixes.
This is mainly a release based of the major overhaul.
Added more I/O Schedulers: BFQ (v3r4), Simple I/O, VR.
[1.5] Please see the posts for the evolution of this version, the last post should detail the final changes (208) #151 , #161 and #208
[1.4] Scaled down the defaul ondemand governor to 1.566 (slight oc). Should perform really well for people satisfied with the defaults.
[1.4] Added more governors for people to play around with, note, I would like to trim it down in futures versions of cymbaline. The newly added ones are (thanks to whoever developed them):
brazilianwax
ondemandx
lionheart
SavagedZen
wheatley
scary
[1.4] Moved init.qcom.post_boot.sh into the ramdisk, to not depend on ROM variances. You should use the /system/etc/init.d hook (of course busybox must be installed).
[1.3] bugfix: the max. freq. was not enabled in 1.2, fixed in this release.
[1.3] some compiler tweaks added building this version of kernel.
[1.2] Restored settings to Stock Governor & I/O scheduler.(ondemand/cfq)
[1.2] BUGFIX: BLN and TouchKey backlight interactions for the "on" settings were conflicting. restored to UCLD2 behavior.
[1.1] Default Governor is tegraks lulzactive.
[1.1] Default CPU Scaling Max. is 1.566MHz.
[1.1] Available Governors (Most governors tuning via sysfs interface please google)
smartass V2
badass
lazy
intellidemand
lagfree
interactive
lulzactive (default)
[1.1] Using Faux's CPU and Voltage table
[1.1] Faux's GPU Overclock (not tunable from userspace)
[1.1] Max Overclockable Frequency: 1.728MHz
[1.0] BLN support.
[1.0] UTF-8 Support.
[1.0] Kernel symbols enabled (some apps require it)
[1.0] init.d: via busybox run-parts, place your scripts in /system/etc/init.d/ (chown root.shell) (chmod 755)
[1.0] insecure (ro.secure=0)
[1.0] adb root
[1.0] adb default shell bash.
[1.0] All IPV6 options enabled.
[1.0] CIFS is a kernel module (/lib/modules/cifs.ko)
[1.0] bootanimation support, drop your favorite bootanimation.zip in /system/media.
[0.0-0.6] Front Camera fully functional WITHOUT any lib hacks for Skyrocket ICS ROMS. Which means keep dont change the libs.
[0.0-0.6] Back Camera working.
[0.0-0.6] Completely removed MMC_ERASE capability, that means with the running kernel any erase to internal sdcard will error out. This is implemented as per the "brickbug" recommendation.
[0.0-0.6] General code merges and cleanup.
​
DOWNLOADS
Click to expand...
Click to collapse
Always, download the latest one, unless you have a need to be on a older version.
[16-OCT-2012] [RD04][2.8] Please read the changelog above.
CYMBALINE-RD04-2.8-cwm5.zip
[16-SEP-2012] [RD04][2.7] Please read the changelog.
CYMBALINE-RD04-2.7-FINAL-cwm5.zip
[12-AUG-2012] [RD03][2.6] Please read the changelog, this post again and post #2 again.
CYMBALINE-RD03-2.6-cwm5.zip
[09-AUG-2012] [RD01-2.3] Please read the changelog, this post again and post #2 again.
CYMBALINE-RD02-2.3-cwm5.zip
[07-AUG-2012] [RD01-2.2] Please read the Changelog and post #2. Again providing two versions, if the 1.8366GHz causes problem booting (e.g. bootloops) flash the 1.566GHz one..
CYMBALINE-RD02-2.2-cwm5-1.836GHz.zip
CYMBALINE-RD02-2.2-cwm5-1.566GHz.zip
[06-AUG-2012] [RD01-2.1] Two versions available for download. If your phone cannot handle the 1.8366GHz (bootloop) then flash the 1.566GHz version
CYMBALINE-RD01-2.1-cwm5-1.836GHz.zip
CYMBALINE-RD01-2.1-cwm5-1.566GHz.zip
[06-AUG-2012] [RD01-2.0] No Overclock version. That is max. CPU is capped at 1.512GHz, use this if you are having bootloops flashing the overclockable to 1.83GHz version. CYMBALINE-RD01-2.0-NO-OC-cwm5.zip (1.512GHz Max.).
[05-AUG-2012]: [RD01-2.0] CYMBALINE-RD01-2.0-cwm5.zip. Please see the change log. (Overclockable upto 1.836GHz).
[27-JUN-2012]: (3.0.8-1.5) CWM Flashable (TouchWiz based ROMS only). Download
[24-JUN-2012]: (3.0.8-1.4) CWM flashable. ICS ROMS (SAMSUNG TouchWiz based) ONLY. NOTE: THIS WILL REPLACE YOUR /system/lib/modules with a symlink to kernel modules (Please see revert section). (installation, just flash in CWM nothing else). CYMBALINE-1.4-cwm5.zip
REVERTS
Click to expand...
Click to collapse
[STOCK-UCLF6] (Official Samsung/ATT Stock Kernel). CWM5 flashable. kernel-sgh-i727-UCLF6-cwm5.zip
[STOCK-UCLE2]: CWM flashable. ATT SKYROCKET, ICS BUILDS ONLY. Download
KNOWN ISSUES/BUGS
Click to expand...
Click to collapse
None as of now.
ADD ON/APPS
Click to expand...
Click to collapse
​
As far as I know (not tried it), only SystemTuner provides the "lipstick" for reading the voltage table and allowing you granular control of the voltage for each frequency.
Most of the other apps, can I believe allow you to change the CPU/IO scheduler/Govs, safely.
Or, if you are hardcore, please see this post 249 by ReedX50v (hit his thanks button), for graciously providing flashable init scripts, you can use one as a template to what works for you.
SOURCE AND OTHER INFO
Click to expand...
Click to collapse
As per GPL requirements, I will post the source as soon as I have me repo setup. The current version is built straight from SAMSUNG Sources for the Korean SKYROCKET LTE. You can build it yourself from here:
Source Git Hub Repo: https://github.com/mohankr/android_kernel_samsung_msm8x60.git
CREDITS/THANKS
Click to expand...
Click to collapse
Although, there was a lot of effort involved in bringing this kernel, but without the following people doing the heavy lifting, it would not be possible..to bring it so quickly.
Faux123 (for majority of the heavy lifting) (gov, oc, uv and gpu). I just ported it over to our device kernel.
tegrak (lulzactive governors)
creams (bln)
romanbb (bln)
DaG (bln)
ReedX50v for providing flashable scripts.
samsung, for at least releasing the source for a similar device, so i could bring this..
whoever were the original authors for the governors included, that were not part of the source.
Click to expand...
Click to collapse

reserved
1) ROM Developers Info.
If you are planning to bundle this kernel in your ROM. The Samsung init.qcom.post_boot.sh has been disabled and moved to the ramdisk. Your changes should be incorporated in /system/etc/init.d scripts (of course need busybox installed). NOTE: the init scripts always execute after the above script, so you can always override the values there.
2) How do I find the available governors?
Below adb command, will tell you what the available governors in the kernel are (assumes adb/rooted) (shown in 1.4 kernel):
Code:
$ adb shell cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors
brazilianwax ondemandx SavagedZen wheatley scary smartassV2 badass lazy intellidemand lagfree lulzactive interactive conservative ondemand userspace powersave Lionheart performance
3) Sysfs interface for GPU OC?
The GPU OC Modes are supported:
Available frequencies:
Code:
3D: 320000000, 300000000, 266667000, 228571000, 200000000, 177778000, 27000000
2D: 266667000, 228571000, 200000000, 160000000, 96000000, 27000000
The default (and the default in CYMBALINE Version 2.0 and above) stock values are:
Code:
3D @266MHz and [email protected]
To change the values use the sysfs interface here are the relevant samples to max it all out. (you can make an init script to make it permanent)
Code:
#!/system/bin/sh
echo "Overclocking GPU"
echo 320000000 > /sys/devices/platform/kgsl-3d0.0/kgsl/kgsl-3d0/max_gpuclk
echo 266667000 > /sys/devices/platform/kgsl-2d0.0/kgsl/kgsl-2d0/max_gpuclk
echo 266667000 > /sys/devices/platform/kgsl-2d1.1/kgsl/kgsl-2d1/max_gpuclk
echo "End"
exit 0
4) Why does the CPUSpy show reaching max. CPU frequency, even though the bundled values 1.52GHz?
This is caused by SAMMY ROM ramping up the CPU's to the Max. during boot. I am looking for a clean way for this to not happen, once I find the source (I have few things narrowed down)...

This is really exciting! Read about this in your other thread and started to pitch a tent.
Bluetooth is not a deal breaker for me so let me know if you need a tester for camera.
Can test on whatever rom needed. Stock, etc.
Sent from my SAMSUNG-SGH-I727 using xda premium

Can't wait to download this when Bluetooth & camera are fixed.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

Some more great work from you mohan. Have you been looking for any possible bln/overclock patches now that you have the source? I'm happy to help in any way I can.

jomeister15 said:
Some more great work from you mohan. Have you been looking for any possible bln/overclock patches now that you have the source? I'm happy to help in any way I can.
Click to expand...
Click to collapse
Thanks. Yes, those will be the first in the TODO list..Also, people have pointed to other interesting kernel mods (like siyah)..Once the source is up I am hoping it will spur involvement from everyone, that will be great..

BLN support?

raviluke said:
BLN support?
Click to expand...
Click to collapse
Umm, look up one post?

The cm9 and aokp guys are gonna love this.
Sent from my SAMSUNG-SGH-I727 using xda premium

if da_G or faux123 does their magic with the kernel for aokp/cm9 now that teh source is avail that would be lovely .
truly

Those guys are long gone..
Sent from my SAMSUNG-SGH-I727 using xda premium

Well, good thing folks like the OP are still around then...

Thought I was noticing a theme in your rom/kernel names and was going to ask if this (and Embryo) were named for Pink Floyd songs.
But then I thought I'd use Google before asking and I found your post stating that Embryo was in fact named as a dedication to the Pink Floyd song (here: http://forum.xda-developers.com/showpost.php?p=25925976&postcount=287 ).
Would love to see you do something -- anything -- with the song, "Several Species of Small Furry Animals Gathered Together in a Cave and Grooving with a Pict"

ReedX50v said:
Well, good thing folks like the OP are still around then...
Click to expand...
Click to collapse
Agreed
Sent from my SAMSUNG-SGH-I727 using xda premium

mindmajick said:
Those guys are long gone..
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Da_g is gone, he got a g-note i believe? But i'm sure faux will make an ICS kernel once the official i727 kernel source is released.

T989 source is here.
http://opensource.samsung.com/reception/receptionSub.do?method=search&searchValue=SGH-T989
3rd one down.
Sent from my SAMSUNG-SGH-I727 using xda premium

Wow thanks, mohan you rock

mindmajick said:
T989 source is here.
http://opensource.samsung.com/reception/receptionSub.do?method=search&searchValue=SGH-T989
3rd one down.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Thanks..let's see if they left the the key bluetooth files..i got camera to work w/o preview..
EDIT: cool..the bits are there ..now to compile and boot..

oh crap I forgot about mohan . apologies

Nice. Nice. Nice. Nice. Nice.
Uc/UV here we come
sent from my I727 TROLLING DEVICE using XDA premium.

[FIRMWARE] List of kernals by devs for Galaxy R

Ice Cream Sandwich Kernals (4.0.4) (EMMC_BUG_FIXED)
Ardatdat ICS kernel 4.1 [ICS][CWM]
Kernel v4.1 features:
- OC to 1.32Ghz, including 1.1Ghz and 1.2Ghz
- Added the tweaked deadline scheduler
- Added SIO v2 scheduler
- Fine tune the auto-brightness logic, same as previous GB kernel
- Enable NTFS, but not auto-mount (need some time to research on that)
- Only root if you have no su in /system/bin nor /system/xbin/.
- Before rooting, remove YouTube.apk (could be installed on Google Play), SecretWallpaper... in /system/app/ in order to free space for rooting
- Increase vm.min_free_kbytes to 12MB to increase stability
- tcp: Proportional Rate Reduction for TCP
Download
Click to expand...
Click to collapse
Horsepower 1.0.9 by fuss
Kernel can be used on:
Features:
- GPU at 400mhz
- CPU OC to 1.2 Ghz
- prerooted
- init.d script support enabled
- updated tegra drivers
- many governors like:
savagedzen governor
sakuractive governor
brdzilianeax governor
minmax governor
abyssplug governor
lulzactive governor
lazy governor
pegasusq governor
smartassv2 governor
scary governor
HYPER governor
wheatley governor
Changelog (1.0.9):
increase free ram to 835mb *)
overclock the gpu to 400mhz *)
enabled lower 1.2ghz oc
Download
Click to expand...
Click to collapse

Buddy... Can u tell me what is the purpose in havin a new thread in listing all kernels here when u hav all the threads in dev section ??
Sent from my GT-I9103 using Tapatalk 2

vipul12389mehta said:
Buddy... Can u tell me what is the purpose in havin a new thread in listing all kernels here when u hav all the threads in dev section ??
Sent from my GT-I9103 using Tapatalk 2
Click to expand...
Click to collapse
Just to bind up all the kernals in one .... and we could easily comapre ....

already we are having thread in Dev section & XDA WIKI page also for the same thing...

vipul12389mehta said:
Buddy... Can u tell me what is the purpose in havin a new thread in listing all kernels here when u hav all the threads in dev section ??
Sent from my GT-I9103 using Tapatalk 2
Click to expand...
Click to collapse
ohh sorry i'll shift it there

krookedsgr said:
ohh sorry i'll shift it there
Click to expand...
Click to collapse
Please search before creating a new thread, Reported to Justin he will decide what to do....

mj.vikram said:
already we are having thread in Dev section & XDA WIKI page also for the same thing...
Click to expand...
Click to collapse
yea sorry my mistake..

It's no worries mate. Appreciate you trying, but I will go ahead and close this for now
Thanks!
Closed.

[KERNEL] [Linux 3.0.100][AOSP][-O3] Aries PLL2 OC Kernel v3.5 {22/10/13}

hey,this is my custom kernel for AOSP 4.3.x rom's
v3.5 Changelogs:
Compile with -O3,properly
Disable ARM_UNWIND
Update wifi driver to match aosp
Kernel now boots up at stock frequencies,use app or CM performance settings to overclock.
cgroups: introduce timer slack controller
Update BFQ to v6r2
Set CFQ I/O as default
arm/crypto: Add optimized AES and SHA1 routines
lib/int_sqrt.c: optimize square root algorithm
msm_serial_hs: Cleanup regarding usage of clock enable/disable apis
msm: board-msm7x27a: Increase Idle timeout
V3 changelogs
* SYNC with joilaroi
*Update to Linux 3.0.100
*SmartassH3 governor
V2 changelogs
added 900 mhz frequency step(note: will not work for everyone
update to linux 3.0.89
various update from android_linux-3.0(nl80211,network etc)
1 mb more ram reserved for audio heap
htc perflock **** removed from cpufreq driver
bt driver update from msm-3.4
cpufreq updates from ics_chocolate
netfilter: xt_qtaguid: update to msm-3.4
enable FIFO net scheduler
MMC_PERF_PROFILING disabled
Some networking options that are useless for Android disabled
INITIAL RELEASE
Linux Kernel 3.0.87
cute_prince overclock method upto 878 Mhz PLL2 (read this guide: http://forum.xda-developers.com/showthread.php?t=2337886)
Compiled with Google GCC 4.7
Wifi drivers from HTC One V,more stable
Hell lotuva Makefile optimizations
Full compatibility with 4.2-based roms,as i am the one who maintains CyanogenMod 10.1.Always up-to-date
Slub memory allocator and Compaction for better memory management
drivers/staging/android from Linux 3.8 ,more ram available to user
Ondemand governor has boostpulse interface,goes well with my custom power HAL
Row I/O scheduler
BT drivers from jb_mr1_chocolate
Shi**y debugging and bloat removed
And various other optimizations and bugfixes i can't even remember

Download
v3.5 oc: http://www.mediafire.com/?ygnd952de8zdnv8
V3 OC: http://www.mediafire.com/?1n31pjq0ftdbg6b
Download V2:
OC : http://www.mediafire.com/download/p7v5pghkknr3cja/aries_kernel_oc_v2.zip
NON-OC : http://www.mediafire.com/download/ch6ogny00b5icfs/aries_kernel_no-oc_v2.zip (no need to partition sd for this)
Download V1:
OC : http://www.mediafire.com/?gopl9l84m8l8x7q
NON-OC: http://www.mediafire.com/?3g4uwe63onhpuad (no need to partition sd for this)
Source Code: https://github.com/sakindia123/android_kernel_htc_pico

Ah, New stuff :good:

Awesome! You should also make a non OC one with your optimizations! Just a suggestion!

7alvi said:
Awesome! You should also make a non OC one with your optimizations! Just a suggestion!
Click to expand...
Click to collapse
that's already being used in my CM10.1 builds

can i use this kernel directly without sd-ext partion？

What is the order of partitions we have to use?

Tips : Sd card > sd data (1gb) > sd cache (80mb) .
This is order for the partitions.
sakindia123 u dont make for 4.1.2 base aosp rom?
Sent from my HTC Explorer A310e using xda premium

+1 @sakindia123

@sakindia123
Great job man

Will try this out:good:

non-oc version online as well!

sakindia123 said:
non-oc version online as well!
Click to expand...
Click to collapse
If you are using HTC one V wi-fi stack then don't you think we need HTC one V firmware files too that are in etc folder??

@rcane said:
If you are using HTC one V wi-fi stack then don't you think we need HTC one V firmware files too that are in etc folder??
Click to expand...
Click to collapse
nope.the bcmdhd driver isnt really dependent on the wifi fw.

hello
can you please make one for (ics cm9) and (jb 4.1 cm10) roms?

after using this kernel will wifi hotspot work properly in CM10.1 beta4??

kunaltyagii said:
after using this kernel will wifi hotspot work properly in CM10.1 beta4??
Click to expand...
Click to collapse
No

hi
very very thanks wifi region problem in some Countries complatly fix with this kernel.
:good::fingers-crossed:

sakindia123 said:
non-oc version online as well!
Click to expand...
Click to collapse
i'm sorry inform you that the phone cannot reboot to system after flashing the zip non-oc kernel。
can u check it？

Its working good man. I m using this kernel on my CM 10.1.2 rom by sakindia.
U probably have flashed on a wrong rom.
Sent from my HTC Explorer A310e using xda premium
---------- Post added at 11:02 AM ---------- Previous post was at 10:58 AM ----------
kunaltyagii said:
after using this kernel will wifi hotspot work properly in CM10.1 beta4??
Click to expand...
Click to collapse
Sachin Thomas said:
No
Click to expand...
Click to collapse
Its good that we r living india. Here mobile internet is worst so u cant dare to use your mobile as wifi hotspot.....
Sent from my HTC Explorer A310e using xda premium

[KERNEL][3.0.101][GT-S7562|S7560/S7560m] KyleOC2 Kernel r2

KyleOC2 Kernel Release 2
This is a Kernel for the Samsung GT-S756X devices aka S DUOS / Ace II x / Trend
for Stock or Stock-based Custom ROMs no CM support.
Kernel version 3.0.101
ZRAM using LZ4 fast compression/decompression algorithm
Frandom module // initialized on boot
CPU OC 1305MHz or 1228MHz or 1113MHz
lowest frequency 61MHz
GPU OC 300MHz
build with Sabermod-Toolchain 4.7
Changes to r1
O3 + additional architecture specific optimization flags applied // gain performance
Lowmemorykiller updated to 3.4 Kernel version
dynamic file-sync
Deadline scheduler enabled (thanks Codename13)
fixed some compile warnings
different approaches to improve performance (commit history)
Kernel Source on Github:
https://github.com/KlinkOnE/kyleopen-kernel.git
Downloads:
KyleOC2-r2
KyleOC2-r1
cortex-a5 optimized toolchain
Instructions:
(optional) backup your modules before flashing!!! How to thanks to coolamit.
flash through recovery
(optional) fix permissions (CWM)
Issues:
using CrossBreeder with KyleOC2 will break entropy generation and may force errors
you tell me
Thanks to:
Cheatman
Codename13
Sadman2
psndna88
Mohitash
Feel free to post suggestions for new features here. I will try to look at it and implement if my time allows. If you are experiencing bugs please report them in a qualified way. I am no developer I just learned how to use Github and like to read a lot.
...enjoy

Changelog
r1
based on the kyleopen-kernel source by Cheatman (includes all previous features)
Kernel version upgraded to 3.0.101
ZRAM using LZ4 fast compression/decompression algorithm
Frandom module added // initialized on boot
CPU OC 1305MHz or 1228MHz or 1113MHz
lowest frequency 61MHz
GPU OC 300MHz
SmartassV2 values tuned
various small changes
compiled with Sabermod-Toolchain 4.7.4
works on GT-S7560(m)
+++ r1-PRIME only
CPU OC 1344MHz
GPU OC 333MHz
adaptive voltage scaling enabled (may or may not work) // more stability

Awesome!
I have no problems so far. Actually amazed how smooth the device runs on the SmartassV2 governor, kinda choppy on the 'ondemand' though. And I didn't have to change the modules. Great work! Hope there is more to come :good:. Maybe you could also compile another version that is OC'd at 1228 MHz or something, not for me but maybe for others. Mine can't handle anything more than 1.113 GHz.

Is it compiled with Sabermod 4.7? Other than that, it looks really great, even better than BA2X 2.0. The only thing I could ask for more in an S Duos/Ace II X/Trend kernel is undervolt. We'll have to try that out sometime.

Can somebody please post guide to back-up and install modules as I'm not sure how to do it
Sent from my GT-S7562 using XDA Free mobile app

pravin.narote said:
Can somebody please post guide to back-up and install modules as I'm not sure how to do it
Sent from my GT-S7562 using XDA Free mobile app
Click to expand...
Click to collapse
Backup/Restore modules for S Duos S7562

Codename13 said:
Is it compiled with Sabermod 4.7? Other than that, it looks really great, even better than BA2X 2.0. The only thing I could ask for more in an S Duos/Ace II X/Trend kernel is undervolt. We'll have to try that out sometime.
Click to expand...
Click to collapse
You are right it is compiled with sabermod 4.7.4 from your github. Is there any better?
Gesendet von meinem GT-S7562

KlinkOnE said:
KyleOC2 Kernel Release 1
This is a Kernel for the GT-S7562 also known as Galaxy S DUOS.
based on the kyleopen-kernel source by Cheatman
Kernel version upgraded to 3.0.101
ZRAM using LZ4 fast compression/decompression algorithm
Frandom module added // initialized on boot // fix needed if using Crossbreeder http://forum.xda-developers.com/showthread.php?p=52123039#post52123039 BA2X_2.0 also
CPU OC 1305MHz or 1113MHz // lowest frequency 61MHz
GPU OC 300MHz
SmartassV2 values tuned
various small changes
should work on GT-S7560m ACE2X too (not tested)
Kernel Source on Github:
https://github.com/KlinkOnE/kyleopen-kernel.git
Download:
1305MHz OC http://d-h.st/WNc
1113MHz OC http://d-h.st/sbp
Instructions:
backup your modules before flashing!!!
flash through recovery
Thanks to:
Cheatman
Codename13
Sadman2
psndna88
Mohitash
Feel free to post suggestions for new features here. I will try to look at it and implement if my time allows. If you are experiencing bugs please report them in a qualified way. I am no developer I just learned how to use Github and like to read a lot.
...enjoy
Click to expand...
Click to collapse
GREAT! can you please compile a 1152 mhz version and if possible WITHOUT the zram? I want the 128 mb of zram will be added to the total ram, thanks

Finally some one updated kernel developer for our s duos.thanks
.is zram beneficial.......release a kernel without that if possible thanks.anyways I will try this today
Sent from my GT-S7562 modded ics 1.2 ghz using Tapatalk 2

ZRAM?
Thanks for the suggestions regarding the use of ZRAM.
First of all this is not a new feature in the kernel as the stock kernel makes use of it too. Whats new is that the drivers are updated and the LZ4 algorithm is used for compression/decompression instead of LZO.
Why do we need ZRAM?
Simply we do not have that much RAM and swapping to disk is slow.
When the device is going out of RAM the ZRAM expands the amount of available RAM by compressing unused data in the RAM itself. This benefits in avoiding slow I/O processes caused by swapping to disk. LZ4 is a very fast compression algorithm with up to 3 times faster decompression than LZO. Of course this doesnt come out of nowhere and some cpu cycles must be used for compression and decompression. But after all i would say it is worth the price for a bit of snappier performance.
How much RAM does the ZRAM use?
Only the amount of compressed data is used from available RAM. So when there is no data compressed in ZRAM the device can make use of the full inbuilt RAM.
Does deactivating ZRAM increase RAM?
No
...I'll stick with it for now. Time will proof.
If you really want to deactivate maybe ask @holymoz he can guide you.

KlinkOnE said:
You are right it is compiled with sabermod 4.7.4 from your github. Is there any better?
Gesendet von meinem GT-S7562
Click to expand...
Click to collapse
That's what I use for BA2X 2.0 and my CM10.2 kernels. I don't think there's anything quite better at the moment. However, I've seen tutorials on how to build toolchains from source, and optimizing them for a specific architecture. I'm thinking of building Sabermod's toolchain sources (on Github, I think they're called toolchain_build) after optimizing them for cortex-a5, which is what our device has. I'm just not sure how exactly to proceed with building the toolchain.

anyone tested on ACE2X GT-S7560m?
Gesendet von meinem GT-S7562

I have tested on 7562 but how to check gpu
Sent from my GT-S7562 using XDA Free mobile app

IjazCI said:
Suggestion for next release
compile An Oc kernel with 1.2 ghz cpu and 300/350 mhz gpu
with 1.2ghz, 1.15ghz, 1ghz, 600mhz, 245mhz as default frequencies. Also make init.d support.
Click to expand...
Click to collapse
init.d is already supported and ill definetly think about the frequencies...
pravin.narote said:
I have tested on 7562 but how to check gpu
Sent from my GT-S7562 using XDA Free mobile app
Click to expand...
Click to collapse
hm maybe try antutu or kernel tuner dunno what you mean with check
Gesendet von meinem GT-S7562

KlinkOnE said:
anyone tested on ACE2X GT-S7560m?
Gesendet von meinem GT-S7562
Click to expand...
Click to collapse
Yes i have tested it on my trend (S7560(M)) and its very very smooth better than kernels that are especially made for ace2x/trend (my opinion).
---------- Post added at 07:52 PM ---------- Previous post was at 07:45 PM ----------
Codename13 said:
Is it compiled with Sabermod 4.7? Other than that, it looks really great, even better than BA2X 2.0. The only thing I could ask for more in an S Duos/Ace II X/Trend kernel is undervolt. We'll have to try that out sometime.
Click to expand...
Click to collapse
Ive been searching and this is the best that i could found:http://forum.xda-developers.com/nexus-s/development/hack-overclocking-undervolting-kernels-t876244

All I mean to say was its showing gpu 200 in antutu
Sent from my GT-S7562 using XDA Free mobile app

pravin.narote said:
All I mean to say was its showing gpu 200 in antutu
Sent from my GT-S7562 using XDA Free mobile app
Click to expand...
Click to collapse
Can't see gpu frequency in antutu. You don't mean adreno 200? Do you?
Gesendet von meinem GT-S7562

It's showing cpu frequency only...nowhere it showing gpu frequency
Sent from my GT-S7562 using XDA Free mobile app

pravin.narote said:
It's showing cpu frequency only...nowhere it showing gpu frequency
Sent from my GT-S7562 using XDA Free mobile app
Click to expand...
Click to collapse
download android tuner from playstore it will show you the gpu freq.

Using this.really nice and stable than other all s duos custom kernels..battery back up is not as stock but not bad atall.but I recommend this kernel to all s duos users..great work
Sent from my GT-S7562 modded ics 1.2 ghz using Tapatalk 2