Ok so I do a fair bit of IT support work these days and thought about all the nice little possibilities it would open up if I could connect my Touch Pro to the network or other devices directly via ethernet.
If you can get USB Network dongles these days, I don't see why you can't have a mini-usb one, but I don't see many around. Does anyone know of a product like this?
If there isn't one, perhaps you could ues a regular USB Network stick/dongle, and use a USB to mini-usb converter. Then I guess it would be a case of someone making a driver or app, right?
Any solutions or suggestions appreciated.
Thanks.
Have the same problem.
Lately I was wondering about the same thing. I've found some USB to RJ45 converters, and was wondering about drivers or app, have you finger something out?
"You care incorrect, sir." -Ed McMann
Take a good look at any USB cable: the two ends are different. One end is for a USB Host (desktopPC/Laptop/Mac). The other end is for a USB **Device** (thumb drive, wireless network dongle, **YOUR PHONE**). Trying to plug two USB *Devices* together would be like trying to plug two USB thumbdrives together to swap files... or more acutately, pluging a USB Network dongle to your thumbdrive to access it over teh internets. ooh, it would be sweet if it were possible.
well that's a bummer. I was thinking that the phone can act as a host when you use the internet connection sharing....
yeah, different kind of host. Actually trying to get that second type of host working myself (Internet Sharing): The USB connection is the bad guy here, by design it's either host or device.
Now you migth find *bluetooth* RJ45 device, but why not just buy a wireless router for your network and use your Fuze's Wifi capabilities? If you plugged a USB Wifi dongle into your desktop, that should be enough to use your fuze's wifi to connect... activsync style. don't ask me how to use it via Internet Sharing, still trying that.
Hallo everybody!
Some days ago my HI802 wich is a rebrand of gk802 android dongle arrived with dhl.
I order with aliexpress.com for $ 99,-
The HI802 has
- SoC – Freescale i.MX6Q Quad Core Cortex A9 Processor with Vivante quad GC2000 GPU,
· System Memory – 1GB RAM
· Storage – 8GB NAND Flash Memory (on a exchangeable micro SD card)
- micro SD card slot for card up to 32 mb
· Video Output – HDMI
· Connectivity – Built-in Wifi 802.11 b/g/n and Bluetooth
· USB – USB Host + USB OTG
The Hi802 was delivered together with an 2000 ma wallplug, and a proprietary! usb to micro-usb cable.
After unpacking the dongle and connecting it to the supplied charger with supplied usb to micro-usb cable, connecting it to my tv with a hdmi-cable, and plugging in the Mele F10 airmouse dongle into the HI802's usp-port the Hi802 booted up, so i thought erything would be ok.
Unfortunatly the airmouse was not recogniced and i couln't see any mouse-pointer on my tv.
So i tried some normal wired usb-mice, but also with the same effect, also no keyboard worked with the HI802.
After a lot of emailing with the dealer (kimdecent) and searching a lot of other places on the internet, i finally got my HI802 to work with mice and keyboards and also my Mele F10 flymouse:
The usb to micro usb-cable that was deliverd with my device is a proprietary one and non-standard.
After replacing the cable with a standard-cable, all wireless mice and keyboards worked.
Also chargers that can deliver 2000 ma or more work with that device.
The firmware can be updated very easy:
1. Copy all image-files to the external sd-card.
2. Insert the end of a paper-clip into a little whole besides the micro-usb, and then connect the stick to the power-supply.
3. The stick will then boot into recovery-mode and with a connected mouse or keyboard you can select 'update all system files' from menu.
4. Update needs a few minutes
5. Select 'reboot'
I updated the firmware to a rooted version: rc2V1.65.3 without any problems.
The wireless connection of the stick is quite good.
I connected to my router which is about 30 feet away and have 2/3 signal strengh and can download with about 20 - 25 mb/sec and is sufficient to watch most movies.
I already downloaded a lot of Apps, nearly everything works fine, a lot of apps can be moved to internal SD card to save free space.
Also XMBC works like a charme, I watch a lot of videos and movies over wireless NAS.
Some issues i still have:
The HI802 doesn't work with active (powered) usb-hubs, nothing connected to these hubs works, so you should use passive hubs only.
Using an external sd-card with the HI802: The external sd-card seems to get mounted read only with wrong rights, so you can' use it with your apps (i tried to use Backup and Restore to backup).
You have to mount it with r/w-rights in root-explorer manually ( that's the /mnt/external_sd/ folder)
When i connect usb-sticks or harddrives over a passive hub, FAT32-formatted media can be mounted, but the HI 802 can't read from those media, althought the files show up with root-explorer. (I will ty to fix this issue with root explorer in the next days!)
I also couldn't get the HI802 to work with NTFS, also apps that normally mount NTFS-sticks (chainfires stickmount) on other devices without any problems did not work. (maybe also munted r/o ?)
Did anybody of you also have the same problems?
Sadly these are no longer available at this time from Aliexpress. I'm very interested in playing with the quad core model.
We seriously need some more distributors in the US.
Unfavorable review of GK802
There is a Youtube review portrays the GK802 graphics performance as substantially inferior to the MK808. I can't post the link as I do not have sufficient posts but if you google "SZEALZ GK802 Quad-core HDMI Stick PC -- Graphics Tragedy" you will find it. It seems difficult to understand or am I missing something?
re: review
Well the Vivante quad GPU used in Hi802/GK 802 may not be as fast as a Mali400, but it is definitly fast enought to play most games and to decode nearly all videos in hardware up to 1080p.
I tested a lot oft different 1080p videos in avi, mkv etc., and all oft them were played fine without any dropped frames or lags.
When configured correctly (large network-buffering and using hardware-acceleration), you can use mx-player, bs-player and even xmbc to play nearly all video formats.
The only problem at the moment is the missing support for harddrives and thumbdrives, not all nas can deliver 10 MB/sec over wifi.
Is it true that there are some physical differences between the gk802 and the hi802, or both of them are exactly the same? I'm asking this because I remember I read somewhere that gk802 has a heatsink while the hi802 does not..can anyone confirm this???
Hi802/GK802
As far as i know, there are no physical differences, everything is the same, even both devices run with the same firmware.
I only have the HI802 and have only seen pictures of the GK802.
There is no heatsink, the heat is dissipated away from the processor over the metal shelf of the dongle.
This seems to be sufficient for the 10 watts the dongles are consuming.
I just got my gk802 today from geekbuying for $99
I plugged in a 32gb jump drive and the device found all my media and played it with no problem. My RC11 air mouse remote was found and it works fine. I plugged in a logitech 260 cam to the usb hub and the pictures/video were great. However, when I record sound I get a buzzing sound even with the cam unplugged which has a mic. Also, I have nube problem. I can't figure out how to move an app using the
RC11. I can't move it from the home screen even an inch let alone to another screen. It is not like my Android phone and like I say, I am a nube.
NOTE=werttrewis;36396614]Hallo everybody!
Some days ago my HI802 wich is a rebrand of gk802 android dongle arrived with dhl.
I order with aliexpress.com for $ 99,-
The HI802 has
- SoC – Freescale i.MX6Q Quad Core Cortex A9 Processor with Vivante quad GC2000 GPU,
· System Memory – 1GB RAM
· Storage – 8GB NAND Flash Memory (on a exchangeable micro SD card)
- micro SD card slot for card up to 32 mb
· Video Output – HDMI
· Connectivity – Built-in Wifi 802.11 b/g/n and Bluetooth
· USB – USB Host + USB OTG
The Hi802 was delivered together with an 2000 ma wallplug, and a proprietary! usb to micro-usb cable.
After unpacking the dongle and connecting it to the supplied charger with supplied usb to micro-usb cable, connecting it to my tv with a hdmi-cable, and plugging in the Mele F10 airmouse dongle into the HI802's usp-port the Hi802 booted up, so i thought erything would be ok.
Unfortunatly the airmouse was not recogniced and i couln't see any mouse-pointer on my tv.
So i tried some normal wired usb-mice, but also with the same effect, also no keyboard worked with the HI802.
After a lot of emailing with the dealer (kimdecent) and searching a lot of other places on the internet, i finally got my HI802 to work with mice and keyboards and also my Mele F10 flymouse:
The usb to micro usb-cable that was deliverd with my device is a proprietary one and non-standard.
After replacing the cable with a standard-cable, all wireless mice and keyboards worked.
Also chargers that can deliver 2000 ma or more work with that device.
The firmware can be updated very easy:
1. Copy all image-files to the external sd-card.
2. Insert the end of a paper-clip into a little whole besides the micro-usb, and then connect the stick to the power-supply.
3. The stick will then boot into recovery-mode and with a connected mouse or keyboard you can select 'update all system files' from menu.
4. Update needs a few minutes
5. Select 'reboot'
I updated the firmware to a rooted version: rc2V1.65.3 without any problems.
The wireless connection of the stick is quite good.
I connected to my router which is about 30 feet away and have 2/3 signal strengh and can download with about 20 - 25 mb/sec and is sufficient to watch most movies.
I already downloaded a lot of Apps, nearly everything works fine, a lot of apps can be moved to internal SD card to save free space.
Also XMBC works like a charme, I watch a lot of videos and movies over wireless NAS.
Some issues i still have:
The HI802 doesn't work with active (powered) usb-hubs, nothing connected to these hubs works, so you should use passive hubs only.
Using an external sd-card with the HI802: The external sd-card seems to get mounted read only with wrong rights, so you can' use it with your apps (i tried to use Backup and Restore to backup).
You have to mount it with r/w-rights in root-explorer manually ( that's the /mnt/external_sd/ folder)
When i connect usb-sticks or harddrives over a passive hub, FAT32-formatted media can be mounted, but the HI 802 can't read from those media, althought the files show up with root-explorer. (I will ty to fix this issue with root explorer in the next days!)
I also couldn't get the HI802 to work with NTFS, also apps that normally mount NTFS-sticks (chainfires stickmount) on other devices without any problems did not work. (maybe also munted r/o ?)
Did anybody of you also have the same problems?[/QUOTE]
Which firmare version do you have?
I am using the lates 1.65.4 rooted version for the gk802, which works quite well and is really fast, but I am still having no success to access any files on ecternal harddisk and thumbdrives, although the latest firmware should have fixed that.
Do you use any apps to mount your drives, or are they automatically mounted?
The Hi802 comes with android 4.0.4.
Normally you just open the apps-screen by clicking the ... menu on the right upper side.
Than you can drag and drop your apps to the homescreen.
jcburkha said:
I plugged in a 32gb jump drive and the device found all my media and played it with no problem. My RC11 air mouse remote was found and it works fine. I plugged in a logitech 260 cam to the usb hub and the pictures/video were great. However, when I record sound I get a buzzing sound even with the cam unplugged which has a mic. Also, I have nube problem. I can't figure out how to move an app using the
RC11. I can't move it from the home screen even an inch let alone to another screen. It is not like my Android phone and like I say, I am a nube.
NOTE=werttrewis;36396614]Hallo everybody!
Some days ago my HI802 wich is a rebrand of gk802 android dongle arrived with dhl.
I order with aliexpress.com for $ 99,-
The HI802 has
- SoC – Freescale i.MX6Q Quad Core Cortex A9 Processor with Vivante quad GC2000 GPU,
· System Memory – 1GB RAM
· Storage – 8GB NAND Flash Memory (on a exchangeable micro SD card)
- micro SD card slot for card up to 32 mb
· Video Output – HDMI
· Connectivity – Built-in Wifi 802.11 b/g/n and Bluetooth
· USB – USB Host + USB OTG
The Hi802 was delivered together with an 2000 ma wallplug, and a proprietary! usb to micro-usb cable.
After unpacking the dongle and connecting it to the supplied charger with supplied usb to micro-usb cable, connecting it to my tv with a hdmi-cable, and plugging in the Mele F10 airmouse dongle into the HI802's usp-port the Hi802 booted up, so i thought erything would be ok.
Unfortunatly the airmouse was not recogniced and i couln't see any mouse-pointer on my tv.
So i tried some normal wired usb-mice, but also with the same effect, also no keyboard worked with the HI802.
After a lot of emailing with the dealer (kimdecent) and searching a lot of other places on the internet, i finally got my HI802 to work with mice and keyboards and also my Mele F10 flymouse:
The usb to micro usb-cable that was deliverd with my device is a proprietary one and non-standard.
After replacing the cable with a standard-cable, all wireless mice and keyboards worked.
Also chargers that can deliver 2000 ma or more work with that device.
The firmware can be updated very easy:
1. Copy all image-files to the external sd-card.
2. Insert the end of a paper-clip into a little whole besides the micro-usb, and then connect the stick to the power-supply.
3. The stick will then boot into recovery-mode and with a connected mouse or keyboard you can select 'update all system files' from menu.
4. Update needs a few minutes
5. Select 'reboot'
I updated the firmware to a rooted version: rc2V1.65.3 without any problems.
The wireless connection of the stick is quite good.
I connected to my router which is about 30 feet away and have 2/3 signal strengh and can download with about 20 - 25 mb/sec and is sufficient to watch most movies.
I already downloaded a lot of Apps, nearly everything works fine, a lot of apps can be moved to internal SD card to save free space.
Also XMBC works like a charme, I watch a lot of videos and movies over wireless NAS.
Some issues i still have:
The HI802 doesn't work with active (powered) usb-hubs, nothing connected to these hubs works, so you should use passive hubs only.
Using an external sd-card with the HI802: The external sd-card seems to get mounted read only with wrong rights, so you can' use it with your apps (i tried to use Backup and Restore to backup).
You have to mount it with r/w-rights in root-explorer manually ( that's the /mnt/external_sd/ folder)
When i connect usb-sticks or harddrives over a passive hub, FAT32-formatted media can be mounted, but the HI 802 can't read from those media, althought the files show up with root-explorer. (I will ty to fix this issue with root explorer in the next days!)
I also couldn't get the HI802 to work with NTFS, also apps that normally mount NTFS-sticks (chainfires stickmount) on other devices without any problems did not work. (maybe also munted r/o ?)
Did anybody of you also have the same problems?
Click to expand...
Click to collapse
[/QUOTE]
werttrewis said:
Which firmare version do you have?
I am using the lates 1.65.4 rooted version for the gk802, which works quite well and is really fast, but I am still having no success to access any files on ecternal harddisk and thumbdrives, although the latest firmware should have fixed that.
Do you use any apps to mount your drives, or are they automatically mounted?
The Hi802 comes with android 4.0.4.
Normally you just open the apps-screen by clicking the ... menu on the right upper side.
Than you can drag and drop your apps to the homescreen.
Click to expand...
Click to collapse
I will be honest, I really don't know much about what I am doing. But, here it goes. I am using version 4.0.4 Android ICS Build version is R13.4-RC2V1.65.3. As far as the drives go, I plugged in the powered hub that I bought with the unit along with a cam that I had and a 32gb jump drive (w/ movies and music). That is it! The GK802 found everything and I didn't have to mount anything. Even the camera video worked fine. The sound is great except for when I try to record audio, all I get is buzzing. I even downloaded xbmc from the geekbuying.com website and it works without a hitch. If it was not for the buzz I get, I would be a happy person. PS - I also plugged in a wireless mouse to the same usb hub because I found that I could not do some things with the air mouse remote alone. (like moving apps and playing angry birds) Everything is fine with it.[/QUOTE]
I have nothing but problems with my newly purchased hiapad hi-802. I bought a mele f10 wireless air mouse with it. The mouse works perfectly with the supplied micro-usb charger. However any video I play freezes and crashes after 30 seconds to 1 minute. Also Bs player is the only video decoder that works. Everything else crashes. I bought a second charger 5v/2000ma and it works except the mele f10 mouse doesn't work. I updated the software to 1.65.4 and I applied the usb fix on hiapad site but the mouse only works with their supplied charger. So I can either use the mouse with no video playback, or video playback but no way to get to the videos... Any suggestions?
Sure. Just ditch the airmouse and use an android phone or tablet with droidmote. Much cheaper, easier and - I think, never having tried one of those airmice - probably also better!
hiapad 802 usb fix file
Hi, they removed the usb fix from their website and I need to download a working firmware.
Do you still have that file?
I've built an AOSP android image for it but I need to be able to compare both boot logs.
rahul1023 said:
I have nothing but problems with my newly purchased hiapad hi-802. I bought a mele f10 wireless air mouse with it. The mouse works perfectly with the supplied micro-usb charger. However any video I play freezes and crashes after 30 seconds to 1 minute. Also Bs player is the only video decoder that works. Everything else crashes. I bought a second charger 5v/2000ma and it works except the mele f10 mouse doesn't work. I updated the software to 1.65.4 and I applied the usb fix on hiapad site but the mouse only works with their supplied charger. So I can either use the mouse with no video playback, or video playback but no way to get to the videos... Any suggestions?
Click to expand...
Click to collapse
I'm thinking about getting a Shield, but I've never bothered with wifi connectivity on my desktop PC. Can I still use the Shield as a USB gamepad? What about the streaming functionality?
Thanks for any answers!
Its not immediately clear *exactly* what you are asking here.
You can stream to the PC as long as you are on the same LAN, so if you connect the shield via wifi to your router and the PC has an ethernet connection to the router then that will work. Or you can use a USB-OTG adaptor in the shield with a USB ethernet adaptor to connect the shield to a router via ethernet too. If your desktop doesnt meet the requirements you can use splashtop instead of the official NVidia stuff.
The USB port on the shield though, well, its a regular android device. Its no different from plugging your phone into the PC. You can't use the shield as a USB gamepad like that. Best off just buying the wired version of the xbox controller if you want a PC gamepad, they aren't the cheapest (but they are far from the most expensive) but they are reasonably good quality and well supported
Just as a side note regarding Ethernet over OTG cable. Some apps (like the Play Store) won't connect unless you are using WiFi or mobile connection.
It's not the Shield's fault, just the app when it enumerates the network connectivity.
So far I only found the Play Store to ignore the network connection over Ethernet, same is true on all the devices I tested so far: TrimSlice (Tegra 2), TF201 (Tegra 3), My Touch 4G, Samsung Galaxy SIII and the Shield.
The Trimslice is the only one with a dedicated hardware Ethernet over PCIe, the others I used an OTG cable and hooked a USB HUB with Ethernet built in.
I don't stream PC games but when Nvidia was demoing the Shield's streaming capabilities they were using an Ethernet dongle so they didn't have to fight for WiFi connections from the attendees at the conferences they were presenting at.
To clarify, I was hoping I could simply plug in a Shield to my USB port and use it as a USB gamepad, but by the sounds of it that doesn't seem very likely.
Can't you just connect ps3 controllers to it over bluetooth? If you can't do that yet I'm sure you will be able to
gilrad said:
To clarify, I was hoping I could simply plug in a Shield to my USB port and use it as a USB gamepad, but by the sounds of it that doesn't seem very likely.
Click to expand...
Click to collapse
No, you cannot unfortunately. If that is what you require, buy a wired xbox controller.
When you set a device to USB tether, it adds another USB profile that creates a network connection over the USB - with some hacking it might be possible to use this connection. I think adb can also do some kind of port-forwarding to allow communication between the device and the computer.
It might be possible to get something working, both for controller input and streaming, but not sure how difficult this would be or what the performance would be.
But I don't think any of this will work very easily out of the box unfortunately!
~Troop
Hi guys. I'm getting stuck with this problem. I don't have a good house network (my isp is terrible) so I started using my Smartphone (huawei nova 5t) to play with my xbox on online games. Until now i've been using the Hotspot (wifi),but it's instable and it pings a lot. So I was wondering how could I use a cable to use my LTE connection on my xbox via ETHERNET using the USB Thetering . I bought from amazon an adapter that's Type C-Ethernet. It's a really good one,but when I plug it to my phone,my Huawei doesn't let me use the USB thetering,I can't activate it. So I was asking if there is a way,an external app or something that could make me do that. My idea is LTE---> Otg Type C Ethernet---> Xbox one. I found nothing on the internet about this,all the threads are about using that OTG to connect my phone to a router and using the router internet,and it works perfectly that way,but I wanna use the cable in the opposite way. I wanna share my smartphone connection with my xbox. Can I do that with that otg or it's just impossible..? Thanks forward.
Hi there. I need the same thing! Sorry to bump late but at least there's only 2 of us.
I think it's called
REVERSED TETHERING via an ETHERNET dongle. (or HOST mode?)
It should be technically possible because ethernet dongles are supported by a lot of ROMs but this function is usually going in the other direction.
Tetrd is another useful search term.
Did you get further with this since you last posted this?
This could be related:
https://android.stackexchange.com/q...-hotspot-and-usb-tethering-so-that-they-are-i
If you can put a windows device between the set up, you can use the program Connectify to make your windows machine a router and choose the ethernet out and plug it into the xbox. And then usb tether the phone into the computer. Connecitfy works with speedify too so if you have multiple hotspots you can bond them together and get a more reliable connection.
Or, I suppose, a Raspberry Pi