Database Info

[S4] Flashing from CM10 to TrickDroid 7.1 does not work

Hey Guys,
yesterday I wanted to revert my ROM from CM10 to TrickDroid 7.1. In TWRP 2.2.1 I wiped caches and did a factory reset and then flashed TD 7.1 following torxx's instructions (wipe, install ROM, flash boot.img with his boot flash script, let the ROM boot). After the reboot the phone hang. The startup sound came through but then no further action for about 7 Minutes.
Was that too little time waiting? Or is there any other issue interfering the boot process after reverting from Android 4.1.1 to 4.0.4 Sense?
If anyone can help is much appreciated. Even if I look stupid afterwords
Burkhard

herzbert said:
Hey Guys,
yesterday I wanted to revert my ROM from CM10 to TrickDroid 7.1. In TWRP 2.2.1 I wiped caches and did a factory reset and then flashed TD 7.1 following torxx's instructions (wipe, install ROM, flash boot.img with his boot flash script, let the ROM boot). After the reboot the phone hang. The startup sound came through but then no further action for about 7 Minutes.
Was that too little time waiting? Or is there any other issue interfering the boot process after reverting from Android 4.1.1 to 4.0.4 Sense?
If anyone can help is much appreciated. Even if I look stupid afterwords
Burkhard
Click to expand...
Click to collapse
Perhaps your hboot does not allow flashing or boot.img? Have you tried the fastboot method of flashing boot.img? How about reverting to a nandroid of a sense based ROM, then flashing TD?

el_smurfo said:
Perhaps your hboot does not allow flashing or boot.img? Have you tried the fastboot method of flashing boot.img? How about reverting to a nandroid of a sense based ROM, then flashing TD?
Click to expand...
Click to collapse
Prior to CM10 I was on latest stock ROM. Before that I had custom ROMs. HBoot on my phone after the OTA update is 1.14. Flashing the boot image of CM10 was no problem.
In order to use the phone I reinstalled CM10 and it works.
The boot images were flashed within fastboot. I do not know any other way to flash a boot image.
I dont have a nandroid backup.

Checked MD5?

torxx said:
Checked MD5?
Click to expand...
Click to collapse
They correspond.
If nothing else helps I will try to install the latest RUU and then flash a ROM. But I wanna circumvent the relock and unlock procedure.
Btw: Did anybody notice that the unlock code changes after an update of HBoot? Nobody mentioned that when the new base was released.

Same here... But fine now
herzbert said:
They correspond.
If nothing else helps I will try to install the latest RUU and then flash a ROM. But I wanna circumvent the relock and unlock procedure.
Btw: Did anybody notice that the unlock code changes after an update of HBoot? Nobody mentioned that when the new base was released.
Click to expand...
Click to collapse
Hey there,
I was having the same problems as you messioned. I flashed the boot.img through fastboot myself and some how it then worked Did not have an problems with flashing the boot.img before. But maybe its worth a try.

Of course you need to use fastboot!!

Did not try yet to flash the RUU. There was an update of CM10 yesterday. The heavy battery drain is gone with this update and there is no urgent need to go back to TrickDroid right now.

herzbert said:
Prior to CM10 I was on latest stock ROM. Before that I had custom ROMs. HBoot on my phone after the OTA update is 1.14. Flashing the boot image of CM10 was no problem.
In order to use the phone I reinstalled CM10 and it works.
The boot images were flashed within fastboot. I do not know any other way to flash a boot image.
I dont have a nandroid backup.
Click to expand...
Click to collapse
HBoot 1.14 is the problem. Anything above 1.09 needs special steps to flash unlike simply flashing with twrp as with 1.09 and below.
Sent from my HTC VLE_U using Xparent SkyBlue Tapatalk 2

LikeaG2root said:
HBoot 1.14 is the problem. Anything above 1.09 needs special steps to flash unlike simply flashing with twrp as with 1.09 and below.
Alright, so, what are these special steps? Can you tell? If its not flashing the within recovery and push the boot.img via fastboot to the phone I would be very interested. My previous HBoot version was 1.13. Flashing ROMs was never a big deal. Also not going to CM9 and back to sense based ROMs.
Click to expand...
Click to collapse

I am on hboot 1.14 and it worked via fastboot. Like you mentioned yourself you reinstalled CM10 and it booted, therefore your previous flash of the boot.img didn't work. So just flash the boot.img via bootloader and fastboot and you should be good...

HighRoIIer said:
I am on hboot 1.14 and it worked via fastboot. Like you mentioned yourself you reinstalled CM10 and it booted, therefore your previous flash of the boot.img didn't work. So just flash the boot.img via bootloader and fastboot and you should be good...
Click to expand...
Click to collapse
I did also flash the boot.img via fastboot. Why do you say that anyway? Is there another method to flash a boot.img?

you didn't mention wiping System as part of the full wipe--needs done

Partially solved
rugmankc said:
you didn't mention wiping System as part of the full wipe--needs done
Click to expand...
Click to collapse
Right, I did not mention it because system is wiped by TWRP during flashing the ROM. So there was no need to wipe it seperately. But maybe my mistake was not to wipe data and the new "asec" folder messed things up.
I'll never know because yesterday I did a complete wipe including the SDCard. Afterwards I was able to install TrickDroid flawlessly.
Thank you all for your efforts.

{HELP} device is keep booting into recovey -- SOLVED --

To the Guru of this forum. After my last rom flashing my device is keeping booting into recovery :crying:. Is it briked ? If so my only hope is the unbricking project ? Thanks in advance.

What recovery are you running?
Can you use the power menu within recovery to boot into bootloader?
Also, please provide as much pertinent info as possible, ie: rom you flashed, firmware, s-off or s-on, locked or unlocked. With your description it's basically like saying, "my car makes a noise all the time. what is causing it?".

Its not bricked.If u can enter recovery
Sent from my HTC sensation

Sorry you are right:
What recovery are you running? 4Ext
Can you use the power menu within recovery to boot into bootloader? yes
The device is HTC unlocked with S-On.
Rom JBMIUI v4.1 2.8.31 R2.
HBOOT 1.27.0000
firmware 3.33.401.6
I've format everything but SD. Restored the most recent back up done today before flashing. Once it reboots HTC logo comes up once, black screen, HTC logo, 4Ext is coming up saying that smartflash it is set to update the boot partition on next system start asking if this should be removed.
I've downloaded and installed again PG58IMG *different files using bootloader
I've founded a 3.33.401.6-Unsecured-Boot.img,+Root+Busybox zip file that can be installed via recovery but it did not help.
At this point I need a bit of help to look into the right direction and I'm not sure that Unbrick_Pyramid is the right way.
Thanks again.

Try turning off smartflash and flash a 3.33 stock rom to see if it will boot.
What was your last working setup, and what were you trying to install?
Sent from my HTC Sensation 4G using Tapatalk 2

Hi. Manage to flash a stock 3.33.
It stopped to reboot straight into recovery.
Sits now on HTC logo now for about 10 mins. I plan to let him run for 1 hr and see what happens.
Was thinking to install CWM on the basis that could be a 4ext recovery issue, toughs?
GROGG88 said:
Try turning off smartflash and flash a 3.33 stock rom to see if it will boot.
What was your last working setup, and what were you trying to install?
Sent from my HTC Sensation 4G using Tapatalk 2
Click to expand...
Click to collapse

If you can install clockworkmod that may help.
Tge device isnt getting the message that it has already booted into recovery once. So something may be jacked up with 4ext.
Clockwork may bypass all that when it doesnt know what to do with that signal to run smartflash.
Worst case scenario...put a full pm58img containing a rom and recovery on the sf card and flash that through bootloader.
You should still be able to get to bootloader as the device looks for that option first.
Sent from my HTC Sensation using xda app-developers app

Hallo. Ok installed CWM. Can please direct me to a full pm58img as you mentioned ? Thx.
Skipjacks said:
If you can install clockworkmod that may help.
Tge device isnt getting the message that it has already booted into recovery once. So something may be jacked up with 4ext.
Clockwork may bypass all that when it doesnt know what to do with that signal to run smartflash.
Worst case scenario...put a full pm58img containing a rom and recovery on the sf card and flash that through bootloader.
You should still be able to get to bootloader as the device looks for that option first.
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse

DiscreteTask said:
Hallo. Ok installed CWM. Can please direct me to a full pm58img as you mentioned ? Thx.
Click to expand...
Click to collapse
And did that help? Are you able to get into recovery without errors now? If so you should be able to flash a fresh version of any ROM.
Try that first. Get any ROM. Flash it. See if it boots.
If you have successfully replaced 4EXT I will bet a fresh flash of a ROM will now boot.
Also worth a shot is replacing or upgrading the firmware, as that could be what's sending the phone into recovery on each boot (though this is less likely that 4EXT just being broken)
Flash a firmware PM58IMG like 3.32 or 3.33 and see if that helps.
But for starters, put a fresh ROM on the SD card and flash it with CWM. (BE SURE IT'S A ROM THAT DOESN'T REQUIRE 4EXT!!)
Once you've got it all fixed you can switch back to 4EXT. I have a feeling it was just the copy you were running that got botched. The software itself is solid and stable. A new copy shoudl work fine now.

CWM v5.0.2.0 was installed fine.
3.33 firmware installed once again.
Using this I've installed ROM that I already did in the past w/o luck, they all sit on the HTC logo. Is like the initial boot sequence is broken. Is boot.img part of the firmware or ROM ?
Trying to download some additional ones.
Thanks,
Skipjacks said:
And did that help? Are you able to get into recovery without errors now? If so you should be able to flash a fresh
version of any ROM.
Try that first. Get any ROM. Flash it. See if it boots.
If you have successfully replaced 4EXT I will bet a fresh flash of a ROM will now boot.
Also worth a shot is replacing or upgrading the firmware, as that could be what's sending the phone into recovery on each boot (though this is less likely that 4EXT just being broken)
Flash a firmware PM58IMG like 3.32 or 3.33 and see if that helps.
But for starters, put a fresh ROM on the SD card and flash it with CWM. (BE SURE IT'S A ROM THAT DOESN'T REQUIRE 4EXT!!)
Once you've got it all fixed you can switch back to 4EXT. I have a feeling it was just the copy you were running that got botched. The software itself is solid and stable. A new copy shoudl work fine now.
Click to expand...
Click to collapse

DiscreteTask said:
CWM v5.0.2.0 was installed fine.
3.33 firmware installed once again.
Using this I've installed ROM that I already did in the past w/o luck, they all sit on the HTC logo. Is like the initial boot sequence is broken. Is boot.img part of the firmware or ROM ?
Trying to download some additional ones.
Thanks,
Click to expand...
Click to collapse
The more details you give, the better the answers will be. Don't consider any detail too small.
What do you mean you installed ROM's that you had done in the past? Do you mean you are trying to restore a backup made with 4EXT?
That won't work. You need to flash a fresh version of the ROM after wiping.
Also, CWM won't install some ROM's that you may have used in the past. What ROM are you trying to install?
The HTC logo that first pops up when you hit the power button is part of the firmware.
Make sure you do a full wipe of everything but the SD card from within CWM. Get whatever's causing the problem off that way. Then flash a fresh install of a ROM from scratch.

Hi.
I did not use any backup only fresh ROMs: ARHD, Elegantia, but also stock ROMs I could find.
I've tried also some PG58IMG with ROM included.
Cheers.
Skipjacks said:
The more details you give, the better the answers will be. Don't consider any detail too small.
What do you mean you installed ROM's that you had done in the past? Do you mean you are trying to restore a backup made with 4EXT?
That won't work. You need to flash a fresh version of the ROM after wiping.
Also, CWM won't install some ROM's that you may have used in the past. What ROM are you trying to install?
The HTC logo that first pops up when you hit the power button is part of the firmware.
Make sure you do a full wipe of everything but the SD card from within CWM. Get whatever's causing the problem off that way. Then flash a fresh install of a ROM from scratch.
Click to expand...
Click to collapse

Arhd and elegencia wont work with cwm. So there is your isdue. Try cm9 or 10 to see if you can boot one of those.
Sent from my HTC Sensation using xda app-developers app

Hallo, after trying all option the following did work for me:
- re-lock bootloader via fastboot oem lock
- apply stock ROM founded in this list http://forum.xda-developers.com/showthread.php?t=1074559
- rebooted fine
I guess that HTC RUU had some superpower and erase and installed whatever file(s) were corrupted.
Now I'm on stock 3.6 - fw 3.33.401.106 - radio 11.76A.3504.00UU_11.24A.3504.31_M
HBOOT 1.29 - S-ON - Relocked.
Standard Recovery.
Now I'm reading how to return my device to S-OFF w/o damaging it again.
Many thanks to skipjacks & groog88 :good:
Skipjacks said:
Arhd and elegencia wont work with cwm. So there is your isdue. Try cm9 or 10 to see if you can boot one of those.
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse

[Q] Boot loops after flashing ANY rom

I have S3 right here and I tried flashing Trickdroid ICS, JB as well as JellyBean Official TWRP zip.
It is S-ON, so after flashing the zip, I go to fastboot and flash boot.img.
I did it already 2-3 times with every rom, but every time I get boot loop. Phone restarts as soon as the first HTC logo disappears.
What is wrong with that?

Do you have the latest TWRP 2.4.1.0 ? (did you try reflashing your recovery?)
What android did you have before unlocking your bootloader? 4.0.3 or 4.0.4?
(and don`t panic If nothing works there is always a solution by relocking your phone and flash the ruu for your phone from here)
http://www.androidfiles.org/ruu/?dir=VilleC2
take a look here:
http://forum.xda-developers.com/showpost.php?p=37498221&postcount=309

impactor said:
I have S3 right here and I tried flashing Trickdroid ICS, JB as well as JellyBean Official TWRP zip.
It is S-ON, so after flashing the zip, I go to fastboot and flash boot.img.
I did it already 2-3 times with every rom, but every time I get boot loop. Phone restarts as soon as the first HTC logo disappears.
What is wrong with that?
Click to expand...
Click to collapse
What's was you on before flashing a custom rom? because just a guess but I think it was 4.0.3 if that is so then try TrickDroid for S3 and get v3 which is 4.0.3 so should work.

It was stock, but I didn't check the version before flashing.
So, TD 3.0, then TD 5.0 and it will work?
By the way, what is better? TD 5.0 or JellyBean Official TWRP?

impactor said:
It was stock, but I didn't check the version before flashing.
So, TD 3.0, then TD 5.0 and it will work?
By the way, what is better? TD 5.0 or JellyBean Official TWRP?
Click to expand...
Click to collapse
No only v3 but if you can get an RUU thats more up to date then do that and the v4/5 should work.

So you didn't install a custom kernal before
Sent from my KFTT using xda premium

KindleFireGuy said:
So you didn't install a custom kernal before
Sent from my KFTT using xda premium
Click to expand...
Click to collapse
Em what he said he did.

You cannot flash S4 roms with an S3 phone, have you made sure that the Roms you flash are specifically assigned for S3? Cuz most are S4

Thanks, guys. That was HBOOT problem. I flashed latest RUU and then I was able to use JB roms.

I am terribly sorry to bump this thread but it is EXACTLY what I need. I read through it and am slightly confused with what you guys said.
Here's my situation:
I have a HTC Evo 3D and have tried running multiple ROMs and on every ROM I run into a boot loop. I use TWRP 2.2.0 and boot that onto my phone using the code "Fastboot boot twrp-shooter.img", then from there I go into TWRP and add the ROM to the root of my SDcard. Then I use TWRP to wipe my cache, delvik cache, system, and do a factory reset. Then I go to install from SDcard and install my desired ROM that I am trying. It is successful and when I reboot it shows the HTC logo, then the loading screen for the ROM, then it goes black, then back to the HTC logo and it continues to loop the same booting sequence over and over.
Am I doing something wrong? Is there something different that I should use or do?
I've been trying to figure out this issue for more than 36 hours and I am borderline psycho right now, I really need answers!

pcout64 said:
I am terribly sorry to bump this thread but it is EXACTLY what I need. I read through it and am slightly confused with what you guys said.
Here's my situation:
I have a HTC Evo 3D and have tried running multiple ROMs and on every ROM I run into a boot loop. I use TWRP 2.2.0 and boot that onto my phone using the code "Fastboot boot twrp-shooter.img", then from there I go into TWRP and add the ROM to the root of my SDcard. Then I use TWRP to wipe my cache, delvik cache, system, and do a factory reset. Then I go to install from SDcard and install my desired ROM that I am trying. It is successful and when I reboot it shows the HTC logo, then the loading screen for the ROM, then it goes black, then back to the HTC logo and it continues to loop the same booting sequence over and over.
Am I doing something wrong? Is there something different that I should use or do?
I've been trying to figure out this issue for more than 36 hours and I am borderline psycho right now, I really need answers!
Click to expand...
Click to collapse
1. check if you are s-on or s-off. If you are s-on, you will also need to flash the kernel (boot.img) from a computer (after you flash the zip)
2. make sure your rom is compatible with your phone

asdfasdfvful said:
1. check if you are s-on or s-off. If you are s-on, you will also need to flash the kernel (boot.img) from a computer (after you flash the zip)
2. make sure your rom is compatible with your phone
Click to expand...
Click to collapse
I already know that I am s-on, and that all I need is the RUU because all I want is to get right the hell back to stock. The problem is that I can't find a RUU that is compatible with my phone!! Your help searching for one would be amazing!!
HTC Evo 3D CDMA Sprint
Mainver: 2.95.652.5
CID: SPCS_002

pcout64 said:
I already know that I am s-on, and that all I need is the RUU because all I want is to get right the hell back to stock. The problem is that I can't find a RUU that is compatible with my phone!! Your help searching for one would be amazing!!
HTC Evo 3D CDMA Sprint
Mainver: 2.95.652.5
CID: SPCS_002
Click to expand...
Click to collapse
Still new to xda, but check this out?
http://forum.xda-developers.com/wiki/HTC_Evo_3D/CDMA
(ctrl + f and find "ruu")

My mainver is not listed, I have already seen this page
The page was last edited in November of 2012, I think it's a bit out of date

Stuck HTC Logo Viper 3.2.6

TWRP 2.4.4.0
CID 11111111 (super cid)
hboot 1.14
S-OFF
I just tried updating to Viper 3.2.6 from 2.4.0
Got S- Off, proceeded to install it.
Wiped Cache, Dalvik and System.
Install
Restart.
Stuck at logo.
Tried flashing boot.img from fastboot. still stuck
Code:
fastboot erase cache
still stuck.
Any help would be appreciated.
While writing this I'm going to attempt going back to 2.4.0 Viper but I would like guidance on making sure I can make it onto 3.2.6.

divertedmind said:
TWRP 2.4.4.0
CID 11111111 (super cid)
hboot 1.14
S-OFF
I just tried updating to Viper 3.2.6 from 2.4.0
Got S- Off, proceeded to install it.
Wiped Cache, Dalvik and System.
Install
Restart.
Stuck at logo.
Tried flashing boot.img from fastboot. still stuck
Code:
fastboot erase cache
still stuck.
Any help would be appreciated.
While writing this I'm going to attempt going back to 2.4.0 Viper but I would like guidance on making sure I can make it onto 3.2.6.
Click to expand...
Click to collapse
How long have you waited? Sometimes the first install takes a long time to load. To be sure give it maybe 10mins to load. Then if that doesn't work make sure it wasn't a bad download by comparing the md5. If that is good try a different recovery. TWRP 2.4.4.0 is know to have issues. Try an earlier version like 2.3.1 and see what happens.

ImagioX1 said:
How long have you waited? Sometimes the first install takes a long time to load. To be sure give it maybe 10mins to load. Then if that doesn't work make sure it wasn't a bad download by comparing the md5. If that is good try a different recovery. TWRP 2.4.4.0 is know to have issues. Try an earlier version like 2.3.1 and see what happens.
Click to expand...
Click to collapse
Thanks. Will check if my download went bad and will also try changing back to 2.3.1 recovery. Thanks for the heads up !
Also btw just to confirm, Does 3.2.6 have a custom load up screen like 2.4.0/2.4.1 did ?
Because I do get stuck at htc logo + red text. just covering my bases.

Yes it does.
It sounds like a bad file or bad flash. Twrp has issues with wiping. Go back to 2.3. Then do a fresh install check md5 as was said. It's also a good idea to flash the one x full wipe tool.
Sent from my HTC One X using xda app-developers app

Thanks all. Redownloaded 3.2.6. Did the hash check. Didn't realize my network was messing up my downloads so badly. I'm going to have to do some tests when I get home. ^_^
Solved.

[Q] Htc One X Unique problem

So as a n00b, I posted in the wrong forum earlier, lol
Anyways , long story short, htc one x evita, unlocked bootloader, tampered, rooted, will not flash past htc splash screen, when I try to restore, it does nothing, when going into folders there is NOTHING there, so random, I did clear my caches as instructed, maybe I am n00bish and deleted the wrong things, I can read the phone in adb, will go into teamwin screen,
REgardless, If I can get this fixed, I will not be messing with it again, lol(as all noobs say)
IS there anything I can do at this point before I throw my hands in the air and throw my phone at a wall?

Far from unique. It's possible that you've accidentally wiped the sd at some point, or did you possibly do a factory reset from the bootloader? Why haven't you just copied a ROM to the device to flash?
Sent from my Evita

timmaaa said:
Far from unique. It's possible that you've accidentally wiped the sd at some point, or did you possibly do a factory reset from the bootloader? Why haven't you just copied a ROM to the device to flash?
Sent from my Evita
Click to expand...
Click to collapse
HI, I may have wiped the sd, let's say sure to this..lol..
I have tried to copy a rom, I had Viper somewhat load, then it flashes back to htc splash, then to twrp,
Any insite to one that may possibly work?(the others will not load at all, they all fail install)

I need a bit more background on the device, please post your bootloader details (the first five lines). What TWRP version are you using? What had you done to the device directly before encountering this problem?
When you say you had Viper somewhat load what do you mean? Did it boot into the ROM at all? Or did it only boot as far as the Viper boot animation? Or did it only make it as far as the HTC splash screen?
I can't really say what's going to work until we figure out exactly what's wrong. Make sure you answer all the above questions with as much relevant detail as possible and we'll see if we can sort it out.
Sent from my Evita

timmaaa said:
I need a bit more background on the device, please post your bootloader details (the first five lines). What TWRP version are you using? What had you done to the device directly before encountering this problem?
When you say you had Viper somewhat load what do you mean? Did it boot into the ROM at all? Or did it only boot as far as the Viper boot animation? Or did it only make it as far as the HTC splash screen?
I can't really say what's going to work until we figure out exactly what's wrong. Make sure you answer all the above questions with as much relevant detail as possible and we'll see if we can sort it out.
Sent from my Evita
Click to expand...
Click to collapse
First off, thank you for your prompt replies
Venom loaded splash screen, then reboot to htc splash with the red developer on the bottom
twrp is the newest one
first 5 lines are you meaning?
*** TAMPERED ****
*** UNLOCKED ****
Evita put ship s-on rl
hboot-2.14.0000
radio-0.23a.32.09.29
??
Well I tried to load the stock RUU from rogers, (ota one)
then after rooting,unlocking bootloader, I tried to load a custom rom(slimkat IIRC)
then IT shut down, I left it for the night, and then nothing, so I tried to install slimkat again, nothing, so I tried venom, and I had the splash screen for the rom, now I am basically back at square one, nothing lol

Yes those are the bootloader details I needed. When you say the latest TWRP I'm assuming you mean 2.6.3.0? There are two versions of 2.6.3.0, the official version and the modified version.
Official version
Can flash any ROM except 4.4 ROMs. If you're using this one it is why SlimKat (plus any other 4.4 ROM) is failing to install.
Modified version
This is required to flash 4.4 ROMs. It does work on some pre 4.4 ROMs but it doesn't on others.
The most common cause for your current situation to happen is that you've forgotten to flash the boot.img with fastboot. Your phone is s-on, this means that the boot.img is unable to be flashed during the recovery install due to security restrictions on hboots equal to or greater than 1.14. So, make sure you're using the correct recovery for the ROM you want to flash (official 2.6.3.0 for Viper, modified 2.6.3.0 for 4.4 ROMs), and make sure you flash the boot.img with fastboot. I have detailed instructions on how to flash a boot.img in my How-To Guide For Beginners thread, link in my signature.
Do that and report back with how you go.
Sent from my Evita

timmaaa said:
Yes those are the bootloader details I needed. When you say the latest TWRP I'm assuming you mean 2.6.3.0? There are two versions of 2.6.3.0, the official version and the modified version.
Official version
Can flash any ROM except 4.4 ROMs. If you're using this one it is why SlimKat (plus any other 4.4 ROM) is failing to install.
Modified version
This is required to flash 4.4 ROMs. It does work on some pre 4.4 ROMs but it doesn't on others.
The most common cause for your current situation to happen is that you've forgotten to flash the boot.img with fastboot. Your phone is s-on, this means that the boot.img is unable to be flashed during the recovery install due to security restrictions on hboots equal to or greater than 1.14. So, make sure you're using the correct recovery for the ROM you want to flash (official 2.6.3.0 for Viper, modified 2.6.3.0 for 4.4 ROMs), and make sure you flash the boot.img with fastboot. I have detailed instructions on how to flash a boot.img in my How-To Guide For Beginners thread, link in my signature.
Do that and report back with how you go.
Sent from my Evita
Click to expand...
Click to collapse
Thank you so very much, once again with the quick replies and the "dumming" it down for me,
I will try in a little bit, to be honest, im not sure what twrp it is, I know its 2.3.6.0, it was the newest one,
in your instructions is there a way to boot just back to stock rom as well?(my pc is horrible, if I load more then one page it dies off lol) I will try this when I get home in a little bit herre.

I can almost positively say you're on the official version of TWRP, you'd need to go out of your way to find the modified one usually. With your phone in its current state you can't use an RUU to go back to stock. The latest Rogers RUU is older than your current firmware and you can't run an older RUU while s-on. If you made a TWRP backup of your stock ROM before wiping you could restore that backup though.
Your best and easiest option right now is to just flash a ROM. Once you've gotten a custom ROM booted up my guess is you won't want to go back to stock
Once you've gotten a ROM booted you can get s-off on your device which will make life a lot easier for you. It means no more flashing a boot.img, you'll be able to flash radios, you can run any Evita RUU (forwards or backwards, and from any carrier), and more benefits. But for now just concentrate on getting the ROM booting.
I'm assuming you have adb/fastboot installed on your PC already? If not you'll need to do that first, Google search "minimal adb and fastboot", the first result should take you to a thread that can get it done with very little effort.
Sent from my Evita

timmaaa said:
I can almost positively say you're on the official version of TWRP, you'd need to go out of your way to find the modified one usually. With your phone in its current state you can't use an RUU to go back to stock. The latest Rogers RUU is older than your current firmware and you can't run an older RUU while s-on. If you made a TWRP backup of your stock ROM before wiping you could restore that backup though.
Your best and easiest option right now is to just flash a ROM. Once you've gotten a custom ROM booted up my guess is you won't want to go back to stock
Once you've gotten a ROM booted you can get s-off on your device which will make life a lot easier for you. It means no more flashing a boot.img, you'll be able to flash radios, you can run any Evita RUU (forwards or backwards, and from any carrier), and more benefits. But for now just concentrate on getting the ROM booting.
I'm assuming you have adb/fastboot installed on your PC already? If not you'll need to do that first, Google search "minimal adb and fastboot", the first result should take you to a thread that can get it done with very little effort.
Sent from my Evita
Click to expand...
Click to collapse
Yes I have a basic Adb/fastboot setup already, is there a particular rom you recommend?(I will trust your best judgement here) I am home now, I will try and let you know
Thank you again

Asking for a ROM recommendation isn't allowed on XDA so I can't answer that question, here's why. To say one ROM is better is to infer that the others are inferior in some way. This is disrespectful to the devs who spend their spare time bringing us these awesome ROMs free of charge.
Each user has different tastes anyway. Some people like Sense ROMs, some like aosp ROMs. Personally I'm an aosp guy, aosp ROMs are generally a bit snappier, plus you can run the latest version of Android (Sense ROMs are limited to 4.2.2 for our device). I'd suggest having a look at the ROMs on offer, check out their features and pick one to flash. If you don't end up liking it you can always just flash another, and that's half the fun.
As a side note, getting s-off via Rumrunner s-off seems to work better on Sense ROMs. I know someone very recently got s-off while on the Kickdroid ROM so if you do want to get s-off I'd suggest flashing that ROM purely for the s-off process. You might like it and want to stay on it, if not just flash away.
Sent from my Evita

timmaaa said:
Asking for a ROM recommendation isn't allowed on XDA so I can't answer that question, here's why. To say one ROM is better is to infer that the others are inferior in some way. This is disrespectful to the devs who spend their spare time bringing us these awesome ROMs free of charge.
Each user has different tastes anyway. Some people like Sense ROMs, some like aosp ROMs. Personally I'm an aosp guy, aosp ROMs are generally a bit snappier, plus you can run the latest version of Android (Sense ROMs are limited to 4.2.2 for our device). I'd suggest having a look at the ROMs on offer, check out their features and pick one to flash. If you don't end up liking it you can always just flash another, and that's half the fun.
As a side note, getting s-off via Rumrunner s-off seems to work better on Sense ROMs. I know someone very recently got s-off while on the Kickdroid ROM so if you do want to get s-off I'd suggest flashing that ROM purely for the s-off process. You might like it and want to stay on it, if not just flash away.
Sent from my Evita
Click to expand...
Click to collapse
I understand and apologize, Never thought of it that way,
Anyways an update, I followed your tutorial, and I am not having much luck here, It still maintains to say NO OS installed (through twrp when rebooting after I do adb and such)
maybe I am missing something ?

Adb or fastboot?
Sent from my Evita

timmaaa said:
Adb or fastboot?
Sent from my Evita
Click to expand...
Click to collapse
Fastboot,
Small update I did manage to get a rootbox rom to load, but its not stable by anymeans...Ugh super frustrated with it

Are you wiping in TWRP before flashing? It's very important to wipe system/factory reset/cache/dalvik cache before installing a ROM. Just never do a factory reset in the bootloader, that'll corrupt your sd card.
Sent from my Evita

timmaaa said:
Are you wiping in TWRP before flashing? It's very important to wipe system/factory reset/cache/dalvik cache before installing a ROM. Just never do a factory reset in the bootloader, that'll corrupt your sd card.
Sent from my Evita
Click to expand...
Click to collapse
Yes to wiping before flashing in TWRP just those ones mentioned, (if you do sd you loose your flash right?), anyways the rom I flashed yesterday was super unstable, just trying a few diff. ones out and trying to find one that will continue to stay working lol!! Your tutorial in your signature is very helpful
thank you so much for all your help,and patience

Yeah you don't want to wipe sd card/internal storage or you'll lose all of your personal data like images, music, ROM zips, backups.
Sent from my Evita

timmaaa said:
Yeah you don't want to wipe sd card/internal storage or you'll lose all of your personal data like images, music, ROM zips, backups.
Sent from my Evita
Click to expand...
Click to collapse
Oh this is a clean phone, I already backed up on pc Before lol
Question though, I installed Viper again(just to try it) and it loads a menu showing ram, one of the memory sections shows -1? is this correct?

On a side note, I got Venom up and running and WOW!!!
once again, a super thank you for your patience and help all along Timmaaa,

I'm not sure what you're talking about, is that after booting into the ROM? Can you show me a screenshot?
Sent from my Evita

timmaaa said:
I'm not sure what you're talking about, is that after booting into the ROM? Can you show me a screenshot?
Sent from my Evita
Click to expand...
Click to collapse
it was while I was installing, everything seems fine, still no wifi(original issue)
im thinking the logic board may be buggered...sad day...lol
But, it is fast as heck now, running venom rom, I will try to get S-off and then maybe try to get it so I can load up the 4.4X roms
Thanks for all the help