Database Info

[Q] Stuck at boot loader, reboots to recovery

Hi all,
I'm trying to help a friend update his Sensation to bruce2728's CM10 beta. I started from scratch on an updated-to-4.0.3 device with this phone and have done a fair amount of research. So far, I have done the following:
1.) Unlocked my boot loader via HTCDev
2.) flashed a custom recovery via fastboot - it's CWM-based 6.0.0.0. I can boot into recovery and back up the ROM and restore it
3.) Rooted with the CWM-flashable SuperSU 0.9.6 and verified root.
4.) used the JuopunutBear method to enable S-OFF. This is verified by booting to the boot loader, it says S-OFF and hboot version 1.27.1111
5.) Flashed a custom ROM
And #4 is where I run into problem.s I started with the CM10 beta mentioned above. It seems to install OK, and then I install G-apps, wipe data/cache, and reboot. I get to an htc logo and then it goes black and boots into recovery automatically. Tried wiping /system along with another wipe of data/cache and same result.
Thinking I had a bad download, I re-downloaded. Same results
Well maybe his Sensation is screwy, I wonder, so I grab the official CM9.1 release. Exact same procedure, exact same results.
So now I'm wondering, what can I do? Right now it's back to running the stock but rooted ROM. So it's not the end of the world. Just trying to figure out what I did wrong or what I can do to fix it. Should I get the official 5.0.2.0 or touch 5.8.0.9? I see both of those on the ClockworkMod ROM manager website, and I own ROM Manager Premium, so I can do all that if need be. Thanks in advance.

You might want to try 4ext recovery it is probably the most used recovery for the sensation. Then wipe every thing except sd . Then flash the ROM then gapps. But make sure you have a working nandroid first.
Sent from my HTC Sensation using xda app-developers app

I do have a working Nandroid. I'll check into 4EXT, as well. Thanks for the assist.

Will you think less of me if I pay $2.82 for the automated installer? :lol:
No, I'm not going that route, just wondering.
edit 10:01pm Central - that did it. Booted into bruce2728's CM10 beta. Sweet!

[Q] Boot loops after flashing ANY rom

I have S3 right here and I tried flashing Trickdroid ICS, JB as well as JellyBean Official TWRP zip.
It is S-ON, so after flashing the zip, I go to fastboot and flash boot.img.
I did it already 2-3 times with every rom, but every time I get boot loop. Phone restarts as soon as the first HTC logo disappears.
What is wrong with that?

Do you have the latest TWRP 2.4.1.0 ? (did you try reflashing your recovery?)
What android did you have before unlocking your bootloader? 4.0.3 or 4.0.4?
(and don`t panic If nothing works there is always a solution by relocking your phone and flash the ruu for your phone from here)
http://www.androidfiles.org/ruu/?dir=VilleC2
take a look here:
http://forum.xda-developers.com/showpost.php?p=37498221&postcount=309

impactor said:
I have S3 right here and I tried flashing Trickdroid ICS, JB as well as JellyBean Official TWRP zip.
It is S-ON, so after flashing the zip, I go to fastboot and flash boot.img.
I did it already 2-3 times with every rom, but every time I get boot loop. Phone restarts as soon as the first HTC logo disappears.
What is wrong with that?
Click to expand...
Click to collapse
What's was you on before flashing a custom rom? because just a guess but I think it was 4.0.3 if that is so then try TrickDroid for S3 and get v3 which is 4.0.3 so should work.

It was stock, but I didn't check the version before flashing.
So, TD 3.0, then TD 5.0 and it will work?
By the way, what is better? TD 5.0 or JellyBean Official TWRP?

impactor said:
It was stock, but I didn't check the version before flashing.
So, TD 3.0, then TD 5.0 and it will work?
By the way, what is better? TD 5.0 or JellyBean Official TWRP?
Click to expand...
Click to collapse
No only v3 but if you can get an RUU thats more up to date then do that and the v4/5 should work.

So you didn't install a custom kernal before
Sent from my KFTT using xda premium

KindleFireGuy said:
So you didn't install a custom kernal before
Sent from my KFTT using xda premium
Click to expand...
Click to collapse
Em what he said he did.

You cannot flash S4 roms with an S3 phone, have you made sure that the Roms you flash are specifically assigned for S3? Cuz most are S4

Thanks, guys. That was HBOOT problem. I flashed latest RUU and then I was able to use JB roms.

I am terribly sorry to bump this thread but it is EXACTLY what I need. I read through it and am slightly confused with what you guys said.
Here's my situation:
I have a HTC Evo 3D and have tried running multiple ROMs and on every ROM I run into a boot loop. I use TWRP 2.2.0 and boot that onto my phone using the code "Fastboot boot twrp-shooter.img", then from there I go into TWRP and add the ROM to the root of my SDcard. Then I use TWRP to wipe my cache, delvik cache, system, and do a factory reset. Then I go to install from SDcard and install my desired ROM that I am trying. It is successful and when I reboot it shows the HTC logo, then the loading screen for the ROM, then it goes black, then back to the HTC logo and it continues to loop the same booting sequence over and over.
Am I doing something wrong? Is there something different that I should use or do?
I've been trying to figure out this issue for more than 36 hours and I am borderline psycho right now, I really need answers!

pcout64 said:
I am terribly sorry to bump this thread but it is EXACTLY what I need. I read through it and am slightly confused with what you guys said.
Here's my situation:
I have a HTC Evo 3D and have tried running multiple ROMs and on every ROM I run into a boot loop. I use TWRP 2.2.0 and boot that onto my phone using the code "Fastboot boot twrp-shooter.img", then from there I go into TWRP and add the ROM to the root of my SDcard. Then I use TWRP to wipe my cache, delvik cache, system, and do a factory reset. Then I go to install from SDcard and install my desired ROM that I am trying. It is successful and when I reboot it shows the HTC logo, then the loading screen for the ROM, then it goes black, then back to the HTC logo and it continues to loop the same booting sequence over and over.
Am I doing something wrong? Is there something different that I should use or do?
I've been trying to figure out this issue for more than 36 hours and I am borderline psycho right now, I really need answers!
Click to expand...
Click to collapse
1. check if you are s-on or s-off. If you are s-on, you will also need to flash the kernel (boot.img) from a computer (after you flash the zip)
2. make sure your rom is compatible with your phone

asdfasdfvful said:
1. check if you are s-on or s-off. If you are s-on, you will also need to flash the kernel (boot.img) from a computer (after you flash the zip)
2. make sure your rom is compatible with your phone
Click to expand...
Click to collapse
I already know that I am s-on, and that all I need is the RUU because all I want is to get right the hell back to stock. The problem is that I can't find a RUU that is compatible with my phone!! Your help searching for one would be amazing!!
HTC Evo 3D CDMA Sprint
Mainver: 2.95.652.5
CID: SPCS_002

pcout64 said:
I already know that I am s-on, and that all I need is the RUU because all I want is to get right the hell back to stock. The problem is that I can't find a RUU that is compatible with my phone!! Your help searching for one would be amazing!!
HTC Evo 3D CDMA Sprint
Mainver: 2.95.652.5
CID: SPCS_002
Click to expand...
Click to collapse
Still new to xda, but check this out?
http://forum.xda-developers.com/wiki/HTC_Evo_3D/CDMA
(ctrl + f and find "ruu")

My mainver is not listed, I have already seen this page
The page was last edited in November of 2012, I think it's a bit out of date

[Q] upgarde snaufu...

was running viperXL 3.2.5 and wiped and went to cm10.1 now i used goo manager to download xhata (sorry i butchered it) now i can only boot into spash screen and bootloader. i used fastboot to reflash twrp and still only boots to the custom spash... hboot 1.09 s-off..... im kinda lost here. should have syuck with viper, why screw with perfection.

What is xhata? Is it a rom?
I'm not sure we can install roms with Goo Manager on this phone.
If you installed a rom for the quad-core Tegra One X, your phone will not boot and you're lucky you didn't get a brick. You need to do a full wipe and reflash.

first off not a noob. it was the evita rom. i still have bootloader access and can get half way into recovery( spash screen then twrp spash...) then reboot into custom splash. it was the rom... http://forum.xda-developers.com/showthread.php?t=2075783 so if anyone has any ideas please help, just dont start with the usual u screwed up flashing roms i know better. and the odd part is after reflashing the recovery via fastboot i get Twrp spash before going back to the phone main splash and boot looping.... and yes im s-off

No need to be so defensive. If we don't know exactly what you flashed, all we can do is ask. Its not meant as an insult. But its always better to ask the seemingly "obvious" questions first, get them out of the way.
If there is a "usual thing" that gets mentioned, its because the mistake of flashing ROMs for the ENDEAVORU in fact happens so often. Downloading from GooManager is not a great idea either, and often a red flag that someone installed a ROM for the wrong version of the phone.
Did the phone operate properly when you were on CM10.1?
What version of TWRP, and what fastboot command did you use to flash it?

I asked the "usual" questions because:
-You have less than 100 posts. That's often a sign of someone who is new to this.
-You used a rom name I've never heard of, and suggested you weren't sure of the name yourself. That's usually a big red flag for someone who flashed some random rom they found via Google.
-You mentioned using Goo Manager. That's a non-standard method for this phone, and an awful lot of people have bricked their phones trying to flash roms through apps that aren't well-supported. CWM Touch was notorious for this when the One X first came out.
If you don't want people to assume things, you need to state them up front.
On topic: There appears to be a bug in the latest TWRP that causes issues for some people. Try rolling back to an earlier version.

iElvis said:
On topic: There appears to be a bug in the latest TWRP that causes issues for some people. Try rolling back to an earlier version.
Click to expand...
Click to collapse
Yeah, I saw that too, and why I asked the OP what version of TWRP.

i had problems with that rom on version 4.0.1 and 4.1.0 had alot of errors and trouble. i haven't tried 4.2.0 though, i have been having better luck with rom after clearing out recovery cache running "fastboot erase cache" and running only twrp 2.3.3.1.

i flashed the second to last release of twrp (latest gave mount issues), viper was running great, cm 10.1 avatar was running fine just didnt like how plain it was so i used goo manager to download hatkaXL and when the download finished i picked select and flash.. then the usual warning about flashing and it rebooted, hit spash screen where it still is hours later. i then tried manually boot into recovery, it hit the bootloader i selected recovery and it seemed to try and load. next step was back to fast boot and to reflash twrp (fastboot flash recovery recovery.img ) flashed 100% success and still wont boot into recovery just the bootloader, and i wasnt trying to get all defensive, i sent first post using the wifes phone and posted quick, had a guy hooking up my satellite at same time as phone crashed. has anyone tried the new version of cwm for the evita? maybe flashing that may get me back, i have roms and backups on the pc that i can seem to side load but never boot as well.

well after repeated flashing of recovery and (fastboot erase cache) it finally booted to recovery, now to see if my backup will load.

[Q] Can't Get Rom to Boot

I was able to get my wife's phone unlocked over the weekend. I threw twrp 2.5.0.0 on there and tried to flash cleanrom. The phone was on the newest bootloader, so I tried flashing the boot.img in fastboot. It just stays on the boot screen forever. I found that there may be issues with newer twrp versions so I tried installing 3 different older version of twrp and all were unresponsive to touch. I could press power once and the twrp lock screen would come up, but that was it. I put 2.5.0.0 back on and it became usable again. Unfortunately I'm not S-Off yet because it says you have to be rooted and my plan was to put CleanRom on and then S-Off. I've verified the MD5 of the ROM zip on the phone. When I am going through the rom install though, and I go through all the options and it starts to install, it literally takes a tenth of a second and says successful. Then when I go to reboot to bootloader, it asks me if i'm sure since i don't have an OS installed. I figured that's just because I haven't flashed the boot img yet, but I am used to rom installs taking a couple seconds on my One XL. I've tried installing the boot.img with Hasoon's all-in-one and it says successful. I've tried installing the bulletproof kernel both via zip format and the boot img and still nothing boots up. What else can I try guys? The wife goes out of town tomorrow morning and needs a working phone. Thanks for your help.
edit: i found the log of the cleanrom install which appears to show the install failing.

utdps said:
I was able to get my wife's phone unlocked over the weekend. I threw twrp 2.5.0.0 on there and tried to flash cleanrom. The phone was on the newest bootloader, so I tried flashing the boot.img in fastboot. It just stays on the boot screen forever. I found that there may be issues with newer twrp versions so I tried installing 3 different older version of twrp and all were unresponsive to touch. I could press power once and the twrp lock screen would come up, but that was it. I put 2.5.0.0 back on and it became usable again. Unfortunately I'm not S-Off yet because it says you have to be rooted and my plan was to put CleanRom on and then S-Off. I've verified the MD5 of the ROM zip on the phone. When I am going through the rom install though, and I go through all the options and it starts to install, it literally takes a tenth of a second and says successful. Then when I go to reboot to bootloader, it asks me if i'm sure since i don't have an OS installed. I figured that's just because I haven't flashed the boot img yet, but I am used to rom installs taking a couple seconds on my One XL. I've tried installing the boot.img with Hasoon's all-in-one and it says successful. I've tried installing the bulletproof kernel both via zip format and the boot img and still nothing boots up. What else can I try guys? The wife goes out of town tomorrow morning and needs a working phone. Thanks for your help.
edit: i found the log of the cleanrom install which appears to show the install failing.
Click to expand...
Click to collapse
Did you flash boot boot.img?

Crypto66 said:
Did you flash boot boot.img?
Click to expand...
Click to collapse
I've narrowed down the issue to the install of CleanROM failing. This may be to twrp 2.5.0.0 but as I've said, earlier versions such as 2.3.3.0 aren't responding to touch for some reason. I don't think 2.5.0.0 is my problem though. I can see it if it didn't wipe properly, but the install is failing due to I/O errors.
But yes, I have tried flashing boot.img. twrp tells me I don't have an os when I try to reboot though, so that's the issue.

Try going to the advanced tab and fix permissions.
Sorry for slow responses, I've got to wait 5 minutes in between posts.

Crypto66 said:
Try going to the advanced tab and fix permissions.
Sorry for slow responses, I've got to wait 5 minutes in between posts.
Click to expand...
Click to collapse
Fix permissions won't work without a rom installed. It fails. And from what I understand anyways, fixing permissions is mostly for apps anyways.

Problem solved. Everyone make sure to use TWRP 2.3.3.1 and only that exact version. Older has touchscreen problems and newer has install issues. Man, this stuff can be frustrating at times.

That's not exactly true. Older versions work just fine, I'm using version 2.2 and it has never failed me.
Older versions aren't working for you because you have a newer touchscreen firmware, you would need to downgrade your touchscreen firmware in order to have touch response. For the same reason, you would not be able to run aosp roms until downgrading. Just thought I'd clear that up.
Sent from my One XL using XDA Premium

[Q] Bricked?

I unlocked and installed the CWM recovery. The ROM manager confirmed this was installed.
Following the guide at teamadroid.com for the twistedkat 4.4.2 ROM.
I flashed a new boot.img (from the twistedkat ROM).
Now I just see the "Only for internal use" red letters, and cannot invoke the CWM recovery for installing the ROM.
Any help would be appreciated on how to install the ROM or get back to stock.
EDIT: I progressed from this situation by re-flashing the CWM recovery, even though this emitted an error indicating that the file could not be validated or such. After this I can enter the CWM recovery.
Thanks!

qabi said:
I unlocked and installed the CWM recovery. The ROM manager confirmed this was installed.
Following the guide at teamadroid.com for the twistedkat 4.4.2 ROM.
I flashed a new boot.img (from the twistedkat ROM).
Now I just see the "Only for internal use" red letters, and cannot invoke the CWM recovery for installing the ROM.
Any help would be appreciated on how to install the ROM or get back to stock.
EDIT: I progressed from this situation by re-flashing the CWM recovery, even though this emitted an error indicating that the file could not be validated or such. After this I can enter the CWM recovery.
Thanks!
Click to expand...
Click to collapse
Do you have Ville (S4) or Ville C2 (S3) model?
If you have S4 ( I suppose due to te fact you installed TwistedKat) install this recovery --> http://goo.im/devs/philz_touch/CWM_Advanced_Edition/ville/philz_touch_6.19.3-ville.zip
The recovery provided by rom manager does NOT support Android 4.4.2 KItKat roms !!!
PLS check if you have S3 or S4

LS.xD said:
The recovery provided by rom manager does NOT support Android 4.4.2 KItKat roms !!!
Click to expand...
Click to collapse
Thanks for your suggestion.
Actually I don't know. I think only one HTC One S was ever in my market (Denmark).
In the meantime I succeeded installing the TwistedKat ROM and have it running now.
Does anybody know of a tutorial for resetting to stock ROM? (Just in case I want to revert).
-qabi

Unable to enter clockwork recovery?
I installed clockwork recovery and actually managed to install TwistedKat (what seems to be an old version).
But I am unable to enter the clockwork recovery in order to reflash to another ROM. Choosing RECOVERY from HBOOT just shows the warning screen and then halts the phone.
I have been reding through a ton of threads mentioning similar symptoms, but with no solution found.
Any help would really be appreciated!

qabi said:
I installed clockwork recovery and actually managed to install TwistedKat (what seems to be an old version).
But I am unable to enter the clockwork recovery in order to reflash to another ROM. Choosing RECOVERY from HBOOT just shows the warning screen and then halts the phone.
I have been reding through a ton of threads mentioning similar symptoms, but with no solution found.
Any help would really be appreciated!
Click to expand...
Click to collapse
I get this as well. Try it twice. For me the second time always boots up into CWM.
Can you tell me what you did to get rid of the red letters/HTC??? Did you flash boot.img again???

808phone said:
I get this as well. Try it twice. For me the second time always boots up into CWM.
Can you tell me what you did to get rid of the red letters/HTC??? Did you flash boot.img again???
Click to expand...
Click to collapse
Which recovery do you use? Are you S-OFF // SuperCID // HBOOT 2.15??

808phone said:
I get this as well. Try it twice. For me the second time always boots up into CWM.
Can you tell me what you did to get rid of the red letters/HTC??? Did you flash boot.img again???
Click to expand...
Click to collapse
The "red letters" have nothing to do with kernel. To get rid of them you must be S-Off and flash a moded hboot/firmware. There is one in the firmware thread that has the red warning removed.
@qabi: don't use CWM. Flash latest TWRP 2.7, you should be able to flash any ROM with it except the ones for 2.16 hboot
Sent from nowhere over the air...

Rapier said:
The "red letters" have nothing to do with kernel. To get rid of them you must be S-Off and flash a moded hboot/firmware. There is one in the firmware thread that has the red warning removed.
@qabi: don't use CWM. Flash latest TWRP 2.7, you should be able to flash any ROM with it except the ones for 2.16 hboot
Sent from nowhere over the air...
Click to expand...
Click to collapse
Rapier, can you explain this? A while back I loaded TWRP (S-ON) then loaded one of the CM series (either 11 or 10, can't remember). Then after I flashed boot.img, I was stuck in boot loop with HTC/red letters.
The reason I was asking what he did was I never did get to stop the boot loop myself. I paid to get it fixed, but I would like to know what I should have done to fix the boot loop after flashing the boot.img and having the problem. Seems like a lot of people get this so, so would be nice to know.
I was basically following everything listed on a web page and everything was working. Unlocked boot loader, SuperSU, TWRP etc... the last thing I did was flash the boot.img and then the problems occurred.
As far as the double try for CWM, I am S-OFF, 2.15 and I noticed it happens every now and then. I don't have this issue with TWRP at all.

It is hard to say why, apparently you did all right. What I can think off is a bad download or a bad flash or you could have used a wrong TWRP version. Also that ROM you have tried could have issues. It is very hard to know why without some logs that shows what went wrong
Sent from nowhere over the air...

LS.xD said:
If you have S4 ( I suppose due to te fact you installed TwistedKat) install this recovery -->
Click to expand...
Click to collapse
After much mucking about I flashed the "philz" recovery. That helped alot - I can now enter recovery every time. So apparently the original CWM recovery has problems on the HTC one S.
Thanks for your suggestions guys!

qabi said:
After much mucking about I flashed the "philz" recovery. That helped alot - I can now enter recovery every time. So apparently the original CWM recovery has problems on the HTC one S.
Thanks for your suggestions guys!
Click to expand...
Click to collapse
I think so. I am running the latest CWM and never had problems before this.