Related
hi all xda community !
So here is the situation :
HBOOT Screen :
***UNLOCKED***
pyramid pvt ship s-off rl
HBOOT-1.27.0000
Radio-11.21.3504.13_2
OpenADSP-v02.6.0.226.00.0104
eMMC-boot
Symptom:
I'm Stuck in a bootloop after i flash the 3.24 firmware and the Elegancia ROM.
First Time the roms boot normaly, then i reboot with the USB Cable attach.
And here come the BootLoop
Try to go to recovery, but bootLoop too.........
So I can go in Hboot, i can do FASTBOOT command and that all.
I try to flash CWM from fastboot -- > Ok for flash but wont go in recovery..
Try to flash 1.17 firmware then flash ROM.zip from 1.35Ruu Europe release --> Bootloop
Try to Flash 3.24 Ruu Same BOOTLOOP..
So what can I do community ?
What Solution i have ?
Why i cant flash a recovery since i Have S-OFF ??
MAYBE :
- Maybe i flash a Ruu who was Corrupt
- Maybe the radio don't match the Ruu i Tried to flash
- Maybe i'm just a simple mind guy
It seems that the 3.24 Firmware from SebastianFM with hBoot unlock have some problem, cause it seems that i'm not the only one who got several problem after flash this Firmware.
toowave said:
hi all xda community !
So here is the situation :
HBOOT Screen :
***UNLOCKED***
pyramid pvt ship s-off rl
HBOOT-1.27.0000
Radio-11.21.3504.13_2
OpenADSP-v02.6.0.226.00.0104
eMMC-boot
Symptom:
I'm Stuck in a bootloop after i flash the 3.24 firmware and the Elegancia ROM.
First Time the roms boot normaly, then i reboot with the USB Cable attach.
And here come the BootLoop
Try to go to recovery, but bootLoop too.........
So I can go in Hboot, i can do FASTBOOT command and that all.
I try to flash CWM from fastboot -- > Ok for flash but wont go in recovery..
Try to flash 1.17 firmware then flash ROM.zip from 1.35Ruu Europe release --> Bootloop
Try to Flash 3.24 Ruu Same BOOTLOOP..
So what can I do community ?
What Solution i have ?
Why i cant flash a recovery since i Have S-OFF ??
MAYBE :
- Maybe i flash a Ruu who was Corrupt
- Maybe the radio don't match the Ruu i Tried to flash
- Maybe i'm just a simple mind guy
It seems that the 3.24 Firmware from SebastianFM with hBoot unlock have some problem, cause it seems that i'm not the only one who got several problem after flash this Firmware.
Click to expand...
Click to collapse
Follow this thread .
http://forum.xda-developers.com/showthread.php?t=1480061
I doubt you may have to look the highlighted red text.
hi & thks
I already read this thread, problem is that i can't flash anything except Ruu Roms with fastboot or maybe i can but i don't know how to do ..
i already try to flash recovery (CWM) but bootloop when i want to go to recovery
if you now how i can have a recovery to work, or maybe if i can wipe everything with fastboot i would appreciate
toowave said:
hi & thks
I already read this thread, problem is that i can't flash anything except Ruu Roms with fastboot or maybe i can but i don't know how to do ..
i already try to flash recovery (CWM) but bootloop when i want to go to recovery
if you now how i can have a recovery to work, or maybe if i can wipe everything with fastboot i would appreciate
Click to expand...
Click to collapse
I got you. Actually you do not have any custom recovery installed. Actually if you flash any RUU it will wipe your recovery partition and install stock recovery. So first you flash a custom recovery. I know you tried to flash CWM.But you got bootloop. Did you delete the file PG58IMG.zip from sdcard after flashing CWM ???? Please redo the following steps.
STEPS TO FOLLOW:
1. Download recovery v5.0.0.8 for the Sensation here .
2. Copy the PG58IMG file into the Root folder of your SD card (The main Folder of your Memory Card)
3. Turn off your phone.
4. Remove the battery.
5. Wait a minute.
6. Put the battery again.
7. Press Power + Volume Down key together.
8. The phone will boot into bootloader.
9. Press Volume up to Accept when it asks" Do you want to start the update"
10. Press Power Off to Reboot back to android after installation is successful (normal screen with homescreen)
11. It may not boot . Do not worry because you may have wiped out evrything.
12. Power off your phone.
13. Delete PG58IMG from your memory card .
14. Download your favorite custom ICS ROM.
15. Put it on the root of your SDCARD.
16. Remove the battery.
17. Wait a minute.
18. Put the battery again.
19. Press Power + Volume Down key together.
20. The phone will boot into bootloader.
21. Select "Recovery" by pressing Volume Down Key.
22. Press Power button after selecting Recovery.
23. Your phone will reboot into clockworkmod recovery.
24. Wipe system, boot, cache, data , and dalvik cache
24. Install your ROM from SDCARD.
25. Wait at least 7 to 10 minutes for first boot
26. Your phone will be normal now.
NOTE:
******* You must be SuperCID to do the above. Please also note , from your preveous post, I understand that you have V3.24 Firmware. Remember only ICS rom will work with this firmware. So do not flash Gingerbread ROM.**********
hi help is appreciate,
`So i tried to follow your step 3 times . One with 1.17 Firmware 3.12 & 3.24.
every time after flashing the recovery, i reboot and when i go to recovery the phone go into boot loop.
toowave said:
hi help is appreciate,
`So i tried to follow your step 3 times . One with 1.17 Firmware 3.12 & 3.24.
every time after flashing the recovery, i reboot and when i go to recovery the phone go into boot loop.
Click to expand...
Click to collapse
Which ROM you want to flash ??
Why did you try all three firmware ???? You should choose your firmware according to your ROM you want to flash.
You may get boot loop after flashing recovery as there might be no rom installed.
So as I said after flashing recovery you should power off your device. Then boot into bootloader by the preveous method. ( Step 3 to 7 ).Selct recovery by volume down key. Then press power button. You will be in recovery. And flash your ROM. But your ROM should match with the firmware.
Ok but How could i flash a ROm if i can't go to recovery ...
Ok maybe you miss understand, i got boot loop when i want to go to recovery too
Please tell me what ROM you want to flash. Post the link here. And once again you give the details of your boot loader screen. Do you have fastboot/adb set up on your PC?
Sent from my HTC Sensation XE with Beats Audio using Tapatalk
Android Revolution : http://forum.xda-developers.com/showpost.php?p=14192842&postcount=4
Seem to be a good Base.
I can Do fast boot command, but no adb .
HBOOT Screen :
***UNLOCKED***
pyramid pvt ship s-off rl
HBOOT-1.27.0000
Radio-11.21.3504.13_2
OpenADSP-v02.6.0.226.00.0104
eMMC-boot
toowave said:
Android Revolution : http://forum.xda-developers.com/showpost.php?p=14192842&postcount=4
Seem to be a good Base.
Click to expand...
Click to collapse
Ok you want arhd 6.2.1 . Tell me your cid. And where is the details of your current boot loader screen?
You did not tell me whether you have adb/fastboot set up..
Sent from my HTC Sensation XE with Beats Audio using Tapatalk
Ok i edit my previous response, with the informations you want.
And i'm super CID.
other Things, the phone won't want to charge cause he repeatedly try to boot.
toowave said:
Ok i edit my previous response, with the informations you want.
And i'm super CID.
other Things, the phone won't want to charge cause he repeatedly try to boot.
Click to expand...
Click to collapse
So, Let fix the recovery first.
Download this attatched recovery (4Ext Touch).
MD5 Checksum : d31d7df8d275f7234416af6a2e8b1c73
Check the md5check sum after download. If it matches , go to the next step else redownload.
Put the downloaded recovery.img in the directory of your fastboot binary.
Connect your phone with pc via usb cable.
Reboot your phone into bootloader.
Open fastboot command from your pc.
Now type the following command in fastboot.
" fastboot flash recovery recovery.img "
After flashing type " fastboot reboot"
Now try to go to recovery. If it is successfull then I will tell you the ROM flashing part.
Please come on gtalk . My gtalk id is musarraf172
ok i'm on gtalk wait for ya
so i'm still in the BOotLoop mode.
i've tried almost everything who was in the forum.
i'm aware of the noob style problem(Firmware not updated, still got PM58IMG.zip in SDcard, wrong Rom--firmware etc ..) and i'm not in this case !!!!
I think the device is brick but maybe someone with good knowledge, and experience can help me.
For now i got the last Hboot, i can flash recovery from fastboot , the command return OK but recovery wont boot.
Ruu flashing run nice with no problem but don't Boot (.exe and PM58IMG.zip).
when i try to unlock bootloader (who is already mark S-OFF but just for try)
with the HTCDEV method i'm stuck on the Unlock bootloader screen and i can't click YES.
it seems that my data partition have disappear ...
I here if you need more information.
Maybe someone can tell me if it's possible to FullWipe from fastboot ?
toowave said:
so i'm still in the BOotLoop mode.
i've tried almost everything who was in the forum.
i'm aware of the noob style problem(Firmware not updated, still got PM58IMG.zip in SDcard, wrong Rom--firmware etc ..) and i'm not in this case !!!!
I think the device is brick but maybe someone with good knowledge, and experience can help me.
For now i got the last Hboot, i can flash recovery from fastboot , the command return OK but recovery wont boot.
Ruu flashing run nice with no problem but don't Boot (.exe and PM58IMG.zip).
when i try to unlock bootloader (who is already mark S-OFF but just for try)
with the HTCDEV method i'm stuck on the Unlock bootloader screen and i can't click YES.
it seems that my data partition have disappear ...
I here if you need more information.
Maybe someone can tell me if it's possible to FullWipe from fastboot ?
Click to expand...
Click to collapse
if yo can go in fastboot your likley not bricked.
you can always flash the original or similar ruu (not a rom) you phone came with in fastboot.
so you will go to stock with your hboot and recovery and to see if it boots.
then do the whole process over. s-off, then root.
then check your mid and cid if its supported.
and only then update to ics.
btw whats the type of phone? branded or og htc
my phone is from vodaphone so branded.
What do you mean by flashing your original or similar Ruu ?
The one coming with the phone out of box ?
i flash via command, .exe or PM58IMG.zip ?
i don't write my original cid is it bad ?
thks
toowave said:
my phone is from vodaphone so branded.
What do you mean by flashing your original or similar Ruu ?
The one coming with the phone out of box ?
i flash via command, .exe or PM58IMG.zip ?
i don't write my original cid is it bad ?
thks
Click to expand...
Click to collapse
Come on g talk
Sent from my HTC Sensation XE with Beats Audio using Tapatalk
toowave said:
my phone is from vodaphone so branded.
What do you mean by flashing your original or similar Ruu ?
The one coming with the phone out of box ?
i flash via command, .exe or PM58IMG.zip ?
i don't write my original cid is it bad ?
thks
Click to expand...
Click to collapse
yes the rom the phone came with or close to it (any with recent ota`s).
always flash the ruu.exe because it wil recover the hboot, radio and recovery to stock. (zipfiles can be easily corrupted)
so go in fastboot usb (via power and volume button) and run the ruu.exe
then s-off/root the device
when s-off you should be able to install recovery within the original rom like cwr or ext4 updater tool, backup, then check your mid and cid, get a correct zipfile for the ics firmware update, flash arhd (it includes the lastest ext4 recovery). then change roms if you like.
you then also can check if the phone is working correctly.
if you already changed to supercid, i think its oke.
if not, on the forum there is al list of cid`s from different countrys and brands.
also there is al list of originals ruu the devices came with.
i assume you have done custom roms before ics came out?
so the cupercid was applied correctly?
i never supercid my devices (on a personal note)
and always flashed the testroms (to get the latest firmware) with no probs.
but if your branded its mandatory.
i've already flash 3 Ruu from this thread : http://forum.xda-developers.com/showthread.php?t=1074559
and all finish in a bootloop with no stock recovery... almost all Ruu run fine with no alert
ruu i flashed already :
RUU_Pyramid_HTC_Europe_1.27.401.3_Radio_10.42.9007.00P_10.11.9007.
RUU_Pyramid_HTC_Europe_1.35.401.1_Radio_10.43a.9007.00U_10.51.9007.
RUU_PYRAMID_LE_ICS_35_S_HTC_Europe_3.25.401.101_Radio_11.68.3504.00U_11.21.3
Aplogies if this is not the best starting point but have been reading for 10 hours and am reluctant to take a next step after failure of s-off that has stuck phone in bootloader.
Details
Copied all SD card data to PC
Rooted phone as described by HTCdev
Used SKG utility to attempt s-off
Controlbear got stuck in some strage loop waiting for device after process had started. Never even got prompted to try the wire trick :-( 30 mins later I had to pull the pin
rebooting phone gave me the Controlbear black screen with Green arrow but could now not connect to the device using controlbear just said waiting for device then press any key to exit
Phone will not boot to android OS
when USB connected to phone in bootloader it says FASTBOOT USB and
fastboot devices lists my connected device so USB is OK
Followed instructions at unlimited.io/troubleshooting to try to recover controlbear -f seemed to do somthing so then did
fastboot flash boot recovery_backup.img
which failed could not find image !!!!! der
downloaded 4ext recovery.img
fastboot flash boot recovery.img
worked
Now have
Details of boot
*** UNLOCKED ***
Pyramid PVT SHIP S-ON RL
HBOOT 1.27.0000
Radio 11.24.3504.10_M
OpenADSP-v)2.6.0.2226.00.0131
cMMC-boot
CID reported by fastboot getvar cid is BM__001
Just tried everything from bootloader but always got back bootloader screen no Controlbear screen with arrow as before
At a whim I ran the controlbear -f again and whammo it came up with the 4ext recovery which I was happy to see. Despite doing a backup before starting anything 4ext says no backup present :-(
How can I recover device? I have downloaded the Bell stock RUU which should be correct for this device. Running it says device image version is 3.32.666.13Hesitant to try anything without some good advice. Hopefully I can recover and try the s-off agin but it's been a painful ride. Is it just as simple as clicking update on the RUU exe?
thanks
The backups are not present its saying when you are doing controlbear -f
That means you have no backup present in that controlbear folder
This can be either because of
1.you have another copy of controlbear folder where you done the soff process and where the controlbear saved the backups
(there will be boot_backup.img, recovery_ backup.img)
2.you deleted those images from the controlbear folder
Now what you can do is
1.just find the boot_backup.img and flash it via bootloader
fastboot flash boot boot_backup.img
That will get you out of the Juopunutbear screen..
No need to run the ruu in this case
Edit: and with regards to the 4EXT backup.. The backup will be stored in sdcard and during soff process the sdcard will be wiped.. That's why 4EXT said no backup present.. Just format your sdcard again.. Copy the sdcard backup from your pc (at least copy the Clockworkmod/backup folder to sdcard with the same path in sdcard... It holds your rom backup if you did any)
Then try the 4EXT backup
Sent from my pyramid.. Through blazing fast sonic waves
If your problem was solved, it's a good idea to add [SOLVED] to the topic.
Still in trouble
HI thanks for the advice. Went to the io help and they said relock boot and reflash RUU. Now I have not RUU'd at all as have not been able to find a suitable one. But did fastboot oem lock as suggested. Can I now unlock it again as your post made way more sense and I found the recovery stuff you are speaking of. Just need to unlock and I should be able to recover. is there an unlock command?
markwatson said:
HI thanks for the advice. Went to the io help and they said relock boot and reflash RUU. Now I have not RUU'd at all as have not been able to find a suitable one. But did fastboot oem lock as suggested. Can I now unlock it again as your post made way more sense and I found the recovery stuff you are speaking of. Just need to unlock and I should be able to recover. is there an unlock command?
Click to expand...
Click to collapse
Copy the unlock_code.bin to the folder with adb & fastboot.
Then
Code:
fastboot flash unlocktoken unlock_code.bin
Also, please come down to this channel for support. (I'm only going to help there because you used the tool)
SOLVED
Solved Problem
Hi All Thanks to some sterling efforts by KGS1992 my problem was solved. Take care ye all to ensure that you ensure you get the correct version of controlbear there are many and you need the correct one for your android version. I'll post a detailed summary tomorrow I'm bushed.
Hey, First post and it going to be about whether my phone is bricked for good or not. =/ I'd really appreciate some help as I've clearly not researched enough into this.
-My Rogers HTC One X had previously been rooted and unlocked to hboot 1.09 with cyanogenmod.
-I wanted to install Android Revolution HD, so i figure I needed an hboot update. I went ahead and flashed the phone with the 'firmware.zip' in 'OTA_EVITA_UL_JB_45_S_Rogers_WWE_3.17.631.2_0.23a.32.09.29_10.128.32.34a_release_299850qstr7rxdbfuofl6j.zip' (HUGE MISTAKE)
-After flashing, I tried to install Android Revolution HD but it had crashed mid way.
-Im able to access hboot and Im also able to go into fastboot and recovery (recovery-clockwork-6.0.2.8-evita).
-Rebooting the phone results in a blank screen after the HTC loading screen. So no adb.
My hboot shows this:
UNLOCKED
EVITA PVT SHIP S-ON RL
HBOOT - 2.14.0000
RADIO - 23a.32.09.29
OPENDSP - v31.1.0.45.0815
eMMC-boot
Nov 26 2012,18:37:14:-1
I've tried locking it, flashing it with PJ83IMG.zip but it says: 'FAILED (remote: 44 hboot version check fail)'.
I've tried running 'RUU_Evita_UL_Rogers_WWE_1.94.631.3_Radio_0.18as.32.09.28L_10.103.32.24L_release_268972_signed.exe' but it gets half way and has Error 155.
Can anyone recommend a rom that will work in this configuration?
Any chance that I can still get S-off on the phone?
Any way to recover the phone at all? Just to be clear, I've flashed my Rogers phone with a Rogers OTA.
Thanks!
Dude you are ****ed! no way to recover from that!..
J/K
All joking aside.
Download TWRP 2.3.3.1 It is compatible with the most ROMS and isn't buggy. Check MD5 and fastboot flash recovery twrprecovery.zip <-- replace with actual zip file name.
then fastboot erase cache
Boot to recovery
Wipe cache dalvik system and factory reset and flash any ROM designed for evita.
Because you're S-ON and on an HBOOT >= 1.14, you'll also have to extract the boot.img from the rom and flash it separately "fastboot flash boot boot.img", unless otherwise indicated on the ROM's thread, usually in the OP.
As a side note, you shouldn't have rooted, you have a lot of reading to do.
Nevermind
Sent from my One XL using XDA Premium
Also that Rom is for the international HTC one x if the install hadn't crashed it would have bricked your phone
Sent from my HTC One X using Tapatalk 2
exad, Thanks for taking the time to write up the instructions for me. I've been able to get the phone to boot again. =) I do have some reading to do haha.
Given whats already done, did I put my phone in a situation where I've limited myself for future modding? What I'm really wondering is if I should be trying to get S-off so I can downgrade my firmware? Will I run into any issues with just running the phone as it is?
certitude said:
exad, Thanks for taking the time to write up the instructions for me. I've been able to get the phone to boot again. =) I do have some reading to do haha.
Given whats already done, did I put my phone in a situation where I've limited myself for future modding? What I'm really wondering is if I should be trying to get S-off so I can downgrade my firmware? Will I run into any issues with just running the phone as it is?
Click to expand...
Click to collapse
If you are going to s off, no need to really downgrade. This because you are turning security checks off. So it actually makes things a bit easier, and decreases the chances of bricking. I'm s off and on hboot 1.14 and was able to flash plenty of roms without a computer.
Sent from my Carbon-ize Evita using xda-developers app
You're not limited. You just need to fastboot flash boot boot.img any time you flash a ROM. If you're not a flashaholic like most of us, it's no big deal.
I wouldn't RUU with S-ON though, even though you didn't supercid, I bricked without supercid running an RUU after rooting.
So, if you don't plan to RUU you don't need to S-OFF either.
If you do intend to S-OFF, since you didn't need to supercid to unlock your bootloader, you would need to hex edit your CID to 11111111 if you wanted to S-OFF.
If you have any other questions, don't hesitate to ask but I suggest reading the stickies in all the sections. Good Luck
Thanks for the info everyone. I'll be keeping that in mind.
exad said:
Dude you are ****ed! no way to recover from that!..
J/K
All joking aside.
Download TWRP 2.3.3.1 It is compatible with the most ROMS and isn't buggy. Check MD5 and fastboot flash recovery twrprecovery.zip <-- replace with actual zip file name.
then fastboot erase cache
Boot to recovery
Wipe cache dalvik system and factory reset and flash any ROM designed for evita.
Because you're S-ON and on an HBOOT >= 1.14, you'll also have to extract the boot.img from the rom and flash it separately "fastboot flash boot boot.img", unless otherwise indicated on the ROM's thread, usually in the OP.
As a side note, you shouldn't have rooted, you have a lot of reading to do.
Click to expand...
Click to collapse
I got a Telus HTC one x yesterday. Spent all day reading about rooting etc and finally went ahead and did it. The unlocking part went without a hitch. I then went to install the clockwork recovery and I think I used an outdated one, because after I did it, it wouldn't boot into recovery. I could get into the bootloader, but checking anything else it wouldn't do anything. At that time I was still able to boot up my phone as normal. I then saw an updated clockwork recovery and tried that one, and it still wouldn't respond when I clicked on recovery. Now I can't do anything except get into the bootloader. My screen says the exact same thing as the original poster in terms of
UNLOCKED
EVITA PVT SHIP S-ON RL
HBOOT - 2.14.0000
RADIO - 23a.32.09.29
OPENDSP - v31.1.0.45.0815
eMMC-boot
Nov 26 2012,18:37:14:-1
I'm so upset right now. I read your instructions on what you suggested to the OP but theirs was Rogers and mines Telus, and I never did have a custom ROM on there, and I don't have a clear cache option, just a 'clear storage'
Even selecting the 'reset phone' doesn't work. I'm ready to cry lol. I don't want to touch anything without guidance so I don't screw it up even further. I know this is the rogers forum but it's what came up when doing a google search.
Please help me. Please tell me this can be fixed. :crying:
Don't use CWM, use TWRP instead. Find version 2.3.3.1 at goo.im (just Google TWRP 2.3.3.1 evita download). Check the md5 of the download is correct. I'm assuming you have fastboot on your pc.
Put the TWRP recovery.img in your fastboot folder
Boot phone into bootloader, wait for it to say "fastboot usb" on the screen of your phone
Open a command prompt in that folder on your pc
Type in the following command:
fastboot flash recovery openrecovery-TWRP-2.3.3.1-evita.img (whatever the name of the recovery image is, I think that's right)
It will now write the recovery to your phone, wait for it to finish, it should only take a few seconds
Now type the following command in:
fastboot erase cache
fastboot reboot-bootloader
Now you should be able to disconnect your phone and flash superuser.zip in your new recovery and have root access.
Sent from my HTC One XL using xda premium
omg!!!!! TY TY TY TY TY!!!!!!!!
It flashed into recovery!!!!!
I can't find where my superuser went...is there a way I can get it onto my phone? At this point I'm so nervous about screwing anything up that I'm afraid to play (which is rare for me as I'm normally quite good at all this stuff)
Do I really need the superuser? I'm planning on putting the ViperXL 3.2.7 rom on my phone. Can I just go straight to installing the rom?
I know where I went wrong now though. I used the international root instructions and not the AT&T ones as I assumed since I was Telus instead of Rogers or AT&T that that was the one I needed. Ugh! I feel like such an idiot!! I had android for quite a while then went to iphone for a little while (mistake) and had gotten so good at doing everything with those and forgot most of the steps involved with rooting android and the terminology. I'm happy to be back home with android!
You can just go ahead and flash ViperXL, that is pre-rooted so you'll be good to go. I just assumed you had a ROM running, so flashing the superuser zip would have just given that ROM root access.
Now, just make sure you stay here in the One XL (AT&T) forum. Make sure you only flash ROMs from here, because flashing one of the International ROMs can brick your phone, and we don't want that.
Sent from my HTC One XL using xda premium
I will be staying here!! lol
Just to be sure I have this correct...
I downloaded Viper and the boot img.
I'm going to go back to my cmd prompts, install the boot img
I'm getting hung up with understanding how to place the zip on my phone storage...My computer isn't showing it as being a separate drive.
I keep getting 'failed' errors with everything in TWRP. If I try to mount as USB storage, my computer says it needs to be formatted...
When I try to do anything else it shows up with failed.
Ok here's what you'll need to do:
Boot your phone into the bootloader (hold power and volume down key together, release power after a second but keep holding volume down until you're in bootloader)
Select recovery
Once recovery boots up, connect to pc with usb cable, select mount in recovery menu, then select mount storage
Your phone should now show up on your pc as a drive, copy the entire ROM zip to your phone
Once it's copied, do eject and safely remove the drive from your pc, and hit unmount on your phone screen
Hit the home button (little house on bottom left) in recovery
From main recovery select wipe, once in wipe menu you must wipe cache, dalvik cache, factory reset, and system
Once you've wiped all those, hit the home button again
Select install from the main recovery menu, then find the ROM you previously copied to your sd card and select it, then swipe to install, let the install finish (please note: if you're installing viper, it will have a few options to select during the install, select the ones you want. But right at the end of the install process there will be a checkbox for "reboot device now" and it will be checked, make sure you uncheck that before you hit finish/done)
Now you'll see two options, wipe cache/dalvik is one, do that, once that's done hit the home button again
From the main menu, hit reboot, and then bootloader, your phone will now boot back into the bootloader and fastboot usb should show up in red text on your screen if your usb cable is still connected
Now back to the pc, Copy the boot.img from the ROM zip and place it in your fastboot folder
Make sure you're connected with usb and fastboot usb is showing on your phone screen
Open a command prompt in your fastboot folder on pc and type in:
fastboot devices
You should see a device number return in the command prompt, if that shows up you're connected properly, so now type in the following command:
fastboot flash boot boot.img
This will flash the boot.img to your phone, let it finish
Once that's done you can reboot and you should be able to reboot into your new ROM
Sent from my Evita
It's not mounting...just keep getting a message from my computer that the drive needs to be formatted before I can use it...
btw, ty for all your help on this you've been amazingly helpful!
You may have corrupted your sd card. You'll have to format it, which means you'll lose all your data off it unfortunately. Do that first and then start again.
Sent from my Evita
It worked!!!!!! It booted up into Viper!!!!! TY a million times over!!!!!!!!!!
Awesome, so glad to see you got it going :thumbup:
And no problem at all, my pleasure, this is what XDA is all about.
Sent from my Evita
I am SO Freaking lost..... My problem is my phone will freez at the HTC splash screen, and the only things I can get into is bootloader and 4ext recovery. I can't flash any images they don't want to be flashed with the PD98img.zip I can't do anyting my phone is empty with no android os.. I am stuck. I can't seem to do much with fastboot with images either.
AlphaOmegaPrimus said:
I am SO Freaking lost..... My problem is my phone will freez at the HTC splash screen, and the only things I can get into is bootloader and 4ext recovery. I can't flash any images they don't want to be flashed with the PD98img.zip I can't do anyting my phone is empty with no android os.. I am stuck. I can't seem to do much with fastboot with images either.
Click to expand...
Click to collapse
can you give some background as what you did to get the phone into this state?
http://forum.xda-developers.com/showthread.php?t=1208507 I tried this to restore my phone thinking it would fix all my problems instead I must have messed something up, and now i'm pretty sure my phone is a paper weight. I managed to run fastboot oem rebootRUU and installed htc_inspire4g_att_RUU_3.20.502.52_US.exe but it hangs at white screen with HTC logo.
Did you try both flash packages?
Sent from my SAMSUNG-SGH-I527 using XDA Premium 4 mobile app
jzsidebott said:
Did you try both flash packages?
Sent from my SAMSUNG-SGH-I527 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I'm a NOOB, I have no idea what you mean by that. Sorry
AlphaOmegaPrimus said:
I'm a NOOB, I have no idea what you mean by that. Sorry
Click to expand...
Click to collapse
In the link you provided, on the first page, there were two seperate downloads, depending on when the phone was developed. "Download (restores to official Froyo 2.2.2) (315MB)" and also "Download (restores to official Gingerbread 2.3.3) (309MB)". Was just wondering which one you tried if any at all.
The only thing I can boot into is the 4ext Recovery Touch & hboot Can someone send me stock inspire 4g rom 4ext backup files they are *.tar files [email protected] Or [email protected]
Would that restore my system ?
the phone is
*** Unlocked ***
ACE PVT SHIP S-ON RL
HBOOT-2.00.0030
MICROP-0438
RADIO-26.17.14.11_M
eMMC-boot
If this helps
The 4ext Touch Recovery says under info
system ext3 549.2mb 504.9 free
data ext3 1.1gb 1.0 free
cache ext3 140.4mb 127.6 free
sdcard fat32 1.9gb 1.9 free
http://forum.xda-developers.com/showthread.php?t=1208507
4.Reboot to HBOOT: Shutdown completely (disconnect USB if connected and pull battery if necessary) then while holding down the VOL-DOWN key, press the POWER key for about half a second. The phone should boot into HBOOT, check the PD98IMG.zip for consistency, then prompt you to install. Select VOL-UP to install.
5.Once installed, HBOOT will prompt you to reboot by pressing the POWER button. Do this
I can get to step 4 and instead of flashing the PD98IMG.zip is says parsing and just goes back to hboot. I can't flash anything.
I have been making some MAJOR progress on my phone.. after messing around with a lot of fastboot commands, I found this with helped .. fastboot -c "lge.kcal=0|0|0|x" boot customrecovery.img if forces some images to boot.
Also the link I posted above only will work if my phone is relocked. I can't even make post in the Inspire 4G Android Development , because i'm "too new " to ask a question. But I managed to get his program to run again and I've noticed something. on step 7
7.Once successfully completed, the phone will automatically reboot to HBOOT and begin the process of installing the RUU. The only thing you have to do at this point is acknowledge the prompt to install by pressing VOL-UP. (Note: the RUU install may skip a couple of images during the install but this is normal.
IT FAILS to copy the RUU to the sdcard. and that's what has left my phone without an OS. I've also got the stock RUU htc_inspire4g_att_RUU_3.20.502.52_US.exe to run and complete But my phone hangs after the HTC logo..
So i'm headed in the right direction. Any ideas ???? ~ T
SO I've made a HUGE step in progress yesterday, I installed JellyTime rom and inspire mod and gapps. and forced the boot.img file to boot using fastboot -c "lge.kcal=0|0|0|x" boot boot.img it made the boot.img to run and start JellyTime. I've got android installed on the phone now. The only problem is I need to S-OFF so I can fastboot flash boot boot.img. It won't do it right now, As of now the phone will bootup and hang on the White HTC logo screen, Every attempt to S-OFF the phone has failed so far. Any Ideas ?
Your phone is bricked?
Try flashing this ROM
http://forum.xda-developers.com/showthread.php?t=996368
AlphaOmegaPrimus said:
SO I've made a HUGE step in progress yesterday, I installed JellyTime rom and inspire mod and gapps. and forced the boot.img file to boot using fastboot -c "lge.kcal=0|0|0|x" boot boot.img it made the boot.img to run and start JellyTime. I've got android installed on the phone now. The only problem is I need to S-OFF so I can fastboot flash boot boot.img. It won't do it right now, As of now the phone will bootup and hang on the White HTC logo screen, Every attempt to S-OFF the phone has failed so far. Any Ideas ?
Click to expand...
Click to collapse
You don't need S-Off to fastboot flash boot.img. Just an unlocked bootloader.
bayartiesto said:
Your phone is bricked?
Try flashing this ROM
http://forum.xda-developers.com/showthread.php?t=996368
Click to expand...
Click to collapse
This is not at all helpful. He is asking for boot.img or S-Off help. If he can't do that his ROM is irrelevant.
OMG. this is the worst place for help ever. I have Jelly time installed and I can get into it But only AFTER forcing the boot.img to boot. I CANNOT boot into jellytime by it's self normally. BECAUSE I cannot flash the boot.img file I get an error message. Because I need S-OFF to be off. right now it's on. Everything I've tried has failed.
AlphaOmegaPrimus said:
OMG. this is the worst place for help ever.
Click to expand...
Click to collapse
This is just about the worst way to start a post where you're asking for help.
AlphaOmegaPrimus said:
I have Jelly time installed and I can get into it But only AFTER forcing the boot.img to boot. I CANNOT boot into jellytime by it's self normally. BECAUSE I cannot flash the boot.img file I get an error message. Because I need S-OFF to be off. right now it's on. Everything I've tried has failed.
Click to expand...
Click to collapse
Did you even read what I wrote before??
bananagranola said:
You don't need S-Off to fastboot flash boot.img. Just an unlocked bootloader.
Click to expand...
Click to collapse
Also, you haven't told us what error message you get when you try to flash the boot.img. And is your bootloader unlocked??
AlphaOmegaPrimus said:
OMG. this is the worst place for help ever. I have Jelly time installed and I can get into it But only AFTER forcing the boot.img to boot. I CANNOT boot into jellytime by it's self normally. BECAUSE I cannot flash the boot.img file I get an error message. Because I need S-OFF to be off. right now it's on. Everything I've tried has failed.
Click to expand...
Click to collapse
What does forcing the boot.img means? there is no other way to flash a boot.img that in fastboot if you are S-ON. There is no need to be S-OFF to fastboot flash. In fact, having S-OFF is not enough to enable flash commands in fastboot (you actually need ENG S-OFF for that).
I suggest that you give detail information about the errors and what you are doing if you want to get helped.
Hello,
I have htc inspire. My phone was new sept 2011 and worked until july 2012. My phone was set to charge only and usb debug disable and was never rooted. One night I put the phone to charge and the next day it I turned it on but it never made past the white screen. I have tried to put the rom on sd card as PD98IMG. I tried RUU. The phone lists:
ACE PVT SHIP S-ON RL
HBOOT-0.85.0024 MICROP-0438
RADIO-26.10.04.03_M
eMMC-boot
Apr 12 2011,00:55:45
When I try using RUU it gets stuck on reloading bootloader
When I try the PD98IMG method using a goldcard, it gets stuck:
parsing...[SD ZIP]
[1] BOOTLOADER -UPDATING
[2] BOOT
[3] RECOVERY
etc
Please help
Not sure but What helped me get past the HTC logo screen is just recovering the old Stock of the phone.
The link provided is to return back to old stock AT&T Roms.
http://forum.xda-developers.com/showthread.php?t=1385016
Boot your phone in Bootloader mode (PWR + VOL DOWN).
Run the RUU Installer.
For S-Off, Advanced Hack Kit (AAHK) was quite a big help to me.
My problem is I have s-on. Phone freezes when I try pd98img on sd goldcard. I can connect with fastboot but I am not sure how to use it. The phone was in charge only & usb debug off when it use to work.
ACE PVT SHIP S-ON RL
HBOOT-0.85.0024 MICROP-0438
RADIO-26.10.04.03_M
eMMC-boot
Apr 12 2011,00:55:45
Any help would be greatly appreciated
Hi, at first i would say sorry for my english
So, i want install on my htc sensation custom rom, so i unlock bootloader on htcdev website, everything gone perfectly
Second step was installing CWM recovery and phone rooting, thats gone good too. Tutorial for CWM and root install i have take from this: theunlockr.com/2012/09/20/how-to-root-the-htc-sensation-on-hboot-version-1-27-0000
In next step i did wire-trick on ControlBear 0.5 beta, but phone don't want to reboot and make JuopunutBear logo, so i try to find 0.6 beta, but i can't found it. I found 0.7 beta, and on this wersion i did wire-trick, i miss a little bit with wire (wait too long) and program send me an error, i must click Enter for exit, and i clicked. From that moment my phone don't want to boot, all time i have JuopunutBear screen. I can go in bootloader, but my recovery don't want to start, so i install recovery and root again and try to restore backup from recovery, but system still don't want to boot.
At this moment i can go to bootloader and i have unlock bootloader with htcdev, recovery and probably root, i haven't s-off. My HBOOT version is 1.27.0000
Please help me, i don't know what i should do. Maybe i still can do wire-trick? I don't know :crying: I tried to find RUU, but two RUU don't want to open, and third send me info that they can't update soft and i should download correct program for update ROM memory.
Please help me!:crying:
Hi.
Run your phone's appropriate RUU, care for the region and the model as well, to be exact. For sensation XE, it has an extra LE in its name.
Sent from my HTCSensation using Tapatalk
install 4ext recovery and then enable smartflash then restore the rom backup youve got ..(step #2 and step #3 ..from this guide)
if phone still not booted then do the extra #1 step from the same above guide ...but use the boot.img from the backup you've done (will be available at /sdcard/clockworkmod/backups)
Thanks @ganeshp !!! Phone is booting and android works Thanks a lot :* You're my hero
btw, i used method with flashing my boot.img, becouse restore from 4ext didn't work
cocaine01 said:
Thanks @ganeshp !!! Phone is booting and android works Thanks a lot :* You're my hero
btw, i used method with flashing my boot.img, becouse restore from 4ext didn't work
Click to expand...
Click to collapse
Where did u go wrong? Are you s off now?
I'm not on s-off, , becouse controlbear (0.7 beta) send me an error and i must click enter for exit, after exit my sensation don't want to boot. Probably i have waiting too long for second wire "click" on sdcard, and program send error. Now i have unlock bootloader, 4ext recovery and root, i dont know which version of controlbear i need for wire-trick. If you have good version please send me a link to download
Send from my HTC Sensation
22
I got a link for 0.5beta, I'll pm you incase in case you want to try it (I haven't. Just got it yesterday, havent had a chance)
edit:used the one click tool to root, controlbear worked like a boss, took a few tries with a wire trick, phone rebooted once but no harm done
So if my phone don't want to boot system and stuck on JuopunutBear screen i can unplug my phone, plug in again and still try to do wire-trick, for that moment when phone will have s-off?
cocaine01 said:
So if my phone don't want to boot system and stuck on JuopunutBear screen i can unplug my phone, plug in again and still try to do wire-trick, for that moment when phone will have s-off?
Click to expand...
Click to collapse
you can always try the wire trick multiple times ...even when the phone is stuck at juopunutbear screen.
however if you want ..you can revert back the phone to working condition too (except sdcard) ..controlbear has this functionality too
check troubleshoot point #4 from my soff guide for further details ( link in my signature )
This is the answer for 10 points
This is what i need. Thanks a lot. I will try to do wire-trick again in future (now i know what i need to do when phone is stuck on that screen )
Thanks a lot
Edit, If i have rooted phone, i haven't use temproot.bat ?
Hi, it's me ... again..
I have done wire-trick today, but i have problem I done it, but controlbear send me text that they can't find device after wire-trick, i have unplug phone and try to restart them. I saw joupunutbear screen - again. So first what i have do i opened troubleshot and made 4. a), but phone still stuck on this screen. so i want to go to recovery, but i havent it I have try to flash recovery, but i recieved text that is unavailable or something. So i try to flash boot.img, but i can't do it too I have opened my Bootloader in sensation and i saw that i have ***LOCKED*** and under that S-OFF RL. So if i have ***LOCKED*** bootloader i can't flash anything, right? (boot.img, recovery, itp) I should unlock bootloader again or what? I'm stuck on joupunutbear logo already and have in bootloader ***LOCKED*** and S-OFF (if it's true) Please help me ... again It's possible i haven't root
cocaine01 said:
Hi, it's me ... again..
I have done wire-trick today, but i have problem I done it, but controlbear send me text that they can't find device after wire-trick, i have unplug phone and try to restart them. I saw joupunutbear screen - again. So first what i have do i opened troubleshot and made 4. a), but phone still stuck on this screen. so i want to go to recovery, but i havent it I have try to flash recovery, but i recieved text that is unavailable or something. So i try to flash boot.img, but i can't do it too I have opened my Bootloader in sensation and i saw that i have ***LOCKED*** and under that S-OFF RL. So if i have ***LOCKED*** bootloader i can't flash anything, right? (boot.img, recovery, itp) I should unlock bootloader again or what? I'm stuck on joupunutbear logo already and have in bootloader ***LOCKED*** and S-OFF (if it's true) Please help me ... again It's possible i haven't root
Click to expand...
Click to collapse
just remove the temp root with remove bat.file or whatever it is called
Ok, i have used this, but phone still is stuck on joupunut screen.
While i do wire-trick i haven't use temp-root, becouse i had unlock bootloader via htcdev, i had root and recovery - now i havent anything
cocaine01 said:
Ok, i have used this, but phone still is stuck on joupunut screen.
While i do wire-trick i haven't use temp-root, becouse i had unlock bootloader via htcdev, i had root and recovery - now i havent anything
Click to expand...
Click to collapse
check only step 2 from here(flashing a recovery)
http://forum.xda-developers.com/showthread.php?t=1631861
edit: first do this
flash jb hboot from unlimited.io site(it is unlocked patched)
http://unlimited.io/jbhboots.htm
download the one for sensation(the ics one)
then flash the recovery.img
When I type this:
sudo ./fastboot erase cache
Click to expand...
Click to collapse
into CMD, they send me text that "sudo" isn't recognizable as command or program Maybe i'm too tired...
EDIT: Okay, i'm so stupid :/ i type that without "sudo ./" and now i have hboot 1.27.1111 and i have flashed recovery 4ext. Now i can make root again and install ROM from SD card like this one: http://forum.xda-developers.com/showthread.php?t=2531054 ?
EDIT2: recovery display info that i must do full wipe and microsd card wipe. So i can't restore backup from sd now, right? I must do full wipe with sd card too and install ROM from sd card?
cocaine01 said:
When I type this:
into CMD, they send me text that "sudo" isn't recognizable as command or program Maybe i'm too tired...
EDIT: Okay, i'm so stupid :/ i type that without "sudo ./" and now i have hboot 1.27.1111 and i have flashed recovery 4ext. Now i can make root again and install ROM from SD card like this one: http://forum.xda-developers.com/showthread.php?t=2531054 ?
EDIT2: recovery display info that i must do full wipe and microsd card wipe. So i can't restore backup from sd now, right? I must do full wipe with sd card too and install ROM from sd card?
Click to expand...
Click to collapse
first: if you are willing to flash a custom rom then there is no need to root your current one
all custom roms comes pre-rooted
second: there is no need to wipe your sdcard.where did you see that?
just make a nandroid backup from recovery just in case
then format all partitions except sdcard from recovery
flash the new rom
done
Ok, i have one backup (i made it about 2 weeks ago, when sensation worked normally), so i think i haven't make second. And my recovery is now in safe-mode, so when i wipe partitions it will be normal, right?
Tomorrow i will download Vipers 5.0.0 JB and install it Thanks a lot
cocaine01 said:
Ok, i have one backup (i made it about 2 weeks ago, when sensation worked normally), so i think i haven't make second. And my recovery is now in safe-mode, so when i wipe partitions it will be normal, right?
Tomorrow i will download Vipers 5.0.0 JB and install it Thanks a lot
Click to expand...
Click to collapse
post results
by the way what do you mean by safe-mode?
rzr86 said:
post results
by the way what do you mean by safe-mode?
Click to expand...
Click to collapse
While recovery is booting, every times when i open it, it boot from 0, for second i can see something like "can't mound sd" or something.
when boot is done, recovery recieve me text:
"ATTN: recovery is in safe mode this is because the following partition is not accessible: "cache"
Please enter the wipe menu and wipe cache!
If you changed hboot you should choose to format all partitions (except sdcard)
Afterwards please reboot recovery"
And above "reboot now" i can see " ! SAFE MODE ! "
When i go in Power Menu and chose power off, i can see:
"You are currently in safe_mode.
You means that your internal partition are not accessible.
please wipe all partitions and then reboot recovery!
reboot recovery now? "
Yes or No, i can't power off device, i must take out battery.
cocaine01 said:
While recovery is booting, every times when i open it, it boot from 0, for second i can see something like "can't mound sd" or something.
when boot is done, recovery recieve me text:
"ATTN: recovery is in safe mode this is because the following partition is not accessible: "cache"
Please enter the wipe menu and wipe cache!
If you changed hboot you should choose to format all partitions (except sdcard)
Afterwards please reboot recovery"
And above "reboot now" i can see " ! SAFE MODE ! "
When i go in Power Menu and chose power off, i can see:
"You are currently in safe_mode.
You means that your internal partition are not accessible.
please wipe all partitions and then reboot recovery!
reboot recovery now? "
Yes or No, i can't power off device, i must take out battery.
Click to expand...
Click to collapse
i am seeing this for the first time
ok then wipe cache.it won't harm the device
also did you reboot recovery?
does it show you the same message?