[Q] Help with Recovering my phone after an OTA update. - AT&T, Rogers HTC One X, Telstra One XL

Hey, First post and it going to be about whether my phone is bricked for good or not. =/ I'd really appreciate some help as I've clearly not researched enough into this.
-My Rogers HTC One X had previously been rooted and unlocked to hboot 1.09 with cyanogenmod.
-I wanted to install Android Revolution HD, so i figure I needed an hboot update. I went ahead and flashed the phone with the 'firmware.zip' in 'OTA_EVITA_UL_JB_45_S_Rogers_WWE_3.17.631.2_0.23a.32.09.29_10.128.32.34a_release_299850qstr7rxdbfuofl6j.zip' (HUGE MISTAKE)
-After flashing, I tried to install Android Revolution HD but it had crashed mid way.
-Im able to access hboot and Im also able to go into fastboot and recovery (recovery-clockwork-6.0.2.8-evita).
-Rebooting the phone results in a blank screen after the HTC loading screen. So no adb.
My hboot shows this:
UNLOCKED
EVITA PVT SHIP S-ON RL
HBOOT - 2.14.0000
RADIO - 23a.32.09.29
OPENDSP - v31.1.0.45.0815
eMMC-boot
Nov 26 2012,18:37:14:-1
I've tried locking it, flashing it with PJ83IMG.zip but it says: 'FAILED (remote: 44 hboot version check fail)'.
I've tried running 'RUU_Evita_UL_Rogers_WWE_1.94.631.3_Radio_0.18as.32.09.28L_10.103.32.24L_release_268972_signed.exe' but it gets half way and has Error 155.
Can anyone recommend a rom that will work in this configuration?
Any chance that I can still get S-off on the phone?
Any way to recover the phone at all? Just to be clear, I've flashed my Rogers phone with a Rogers OTA.
Thanks!

Dude you are ****ed! no way to recover from that!..
J/K
All joking aside.
Download TWRP 2.3.3.1 It is compatible with the most ROMS and isn't buggy. Check MD5 and fastboot flash recovery twrprecovery.zip <-- replace with actual zip file name.
then fastboot erase cache
Boot to recovery
Wipe cache dalvik system and factory reset and flash any ROM designed for evita.
Because you're S-ON and on an HBOOT >= 1.14, you'll also have to extract the boot.img from the rom and flash it separately "fastboot flash boot boot.img", unless otherwise indicated on the ROM's thread, usually in the OP.
As a side note, you shouldn't have rooted, you have a lot of reading to do.

Nevermind
Sent from my One XL using XDA Premium

Also that Rom is for the international HTC one x if the install hadn't crashed it would have bricked your phone
Sent from my HTC One X using Tapatalk 2

exad, Thanks for taking the time to write up the instructions for me. I've been able to get the phone to boot again. =) I do have some reading to do haha.
Given whats already done, did I put my phone in a situation where I've limited myself for future modding? What I'm really wondering is if I should be trying to get S-off so I can downgrade my firmware? Will I run into any issues with just running the phone as it is?

certitude said:
exad, Thanks for taking the time to write up the instructions for me. I've been able to get the phone to boot again. =) I do have some reading to do haha.
Given whats already done, did I put my phone in a situation where I've limited myself for future modding? What I'm really wondering is if I should be trying to get S-off so I can downgrade my firmware? Will I run into any issues with just running the phone as it is?
Click to expand...
Click to collapse
If you are going to s off, no need to really downgrade. This because you are turning security checks off. So it actually makes things a bit easier, and decreases the chances of bricking. I'm s off and on hboot 1.14 and was able to flash plenty of roms without a computer.
Sent from my Carbon-ize Evita using xda-developers app

You're not limited. You just need to fastboot flash boot boot.img any time you flash a ROM. If you're not a flashaholic like most of us, it's no big deal.
I wouldn't RUU with S-ON though, even though you didn't supercid, I bricked without supercid running an RUU after rooting.
So, if you don't plan to RUU you don't need to S-OFF either.
If you do intend to S-OFF, since you didn't need to supercid to unlock your bootloader, you would need to hex edit your CID to 11111111 if you wanted to S-OFF.
If you have any other questions, don't hesitate to ask but I suggest reading the stickies in all the sections. Good Luck

Thanks for the info everyone. I'll be keeping that in mind.

exad said:
Dude you are ****ed! no way to recover from that!..
J/K
All joking aside.
Download TWRP 2.3.3.1 It is compatible with the most ROMS and isn't buggy. Check MD5 and fastboot flash recovery twrprecovery.zip <-- replace with actual zip file name.
then fastboot erase cache
Boot to recovery
Wipe cache dalvik system and factory reset and flash any ROM designed for evita.
Because you're S-ON and on an HBOOT >= 1.14, you'll also have to extract the boot.img from the rom and flash it separately "fastboot flash boot boot.img", unless otherwise indicated on the ROM's thread, usually in the OP.
As a side note, you shouldn't have rooted, you have a lot of reading to do.
Click to expand...
Click to collapse
I got a Telus HTC one x yesterday. Spent all day reading about rooting etc and finally went ahead and did it. The unlocking part went without a hitch. I then went to install the clockwork recovery and I think I used an outdated one, because after I did it, it wouldn't boot into recovery. I could get into the bootloader, but checking anything else it wouldn't do anything. At that time I was still able to boot up my phone as normal. I then saw an updated clockwork recovery and tried that one, and it still wouldn't respond when I clicked on recovery. Now I can't do anything except get into the bootloader. My screen says the exact same thing as the original poster in terms of
UNLOCKED
EVITA PVT SHIP S-ON RL
HBOOT - 2.14.0000
RADIO - 23a.32.09.29
OPENDSP - v31.1.0.45.0815
eMMC-boot
Nov 26 2012,18:37:14:-1
I'm so upset right now. I read your instructions on what you suggested to the OP but theirs was Rogers and mines Telus, and I never did have a custom ROM on there, and I don't have a clear cache option, just a 'clear storage'
Even selecting the 'reset phone' doesn't work. I'm ready to cry lol. I don't want to touch anything without guidance so I don't screw it up even further. I know this is the rogers forum but it's what came up when doing a google search.
Please help me. Please tell me this can be fixed. :crying:

Don't use CWM, use TWRP instead. Find version 2.3.3.1 at goo.im (just Google TWRP 2.3.3.1 evita download). Check the md5 of the download is correct. I'm assuming you have fastboot on your pc.
Put the TWRP recovery.img in your fastboot folder
Boot phone into bootloader, wait for it to say "fastboot usb" on the screen of your phone
Open a command prompt in that folder on your pc
Type in the following command:
fastboot flash recovery openrecovery-TWRP-2.3.3.1-evita.img (whatever the name of the recovery image is, I think that's right)
It will now write the recovery to your phone, wait for it to finish, it should only take a few seconds
Now type the following command in:
fastboot erase cache
fastboot reboot-bootloader
Now you should be able to disconnect your phone and flash superuser.zip in your new recovery and have root access.
Sent from my HTC One XL using xda premium

omg!!!!! TY TY TY TY TY!!!!!!!!
It flashed into recovery!!!!!
I can't find where my superuser went...is there a way I can get it onto my phone? At this point I'm so nervous about screwing anything up that I'm afraid to play (which is rare for me as I'm normally quite good at all this stuff)
Do I really need the superuser? I'm planning on putting the ViperXL 3.2.7 rom on my phone. Can I just go straight to installing the rom?
I know where I went wrong now though. I used the international root instructions and not the AT&T ones as I assumed since I was Telus instead of Rogers or AT&T that that was the one I needed. Ugh! I feel like such an idiot!! I had android for quite a while then went to iphone for a little while (mistake) and had gotten so good at doing everything with those and forgot most of the steps involved with rooting android and the terminology. I'm happy to be back home with android!

You can just go ahead and flash ViperXL, that is pre-rooted so you'll be good to go. I just assumed you had a ROM running, so flashing the superuser zip would have just given that ROM root access.
Now, just make sure you stay here in the One XL (AT&T) forum. Make sure you only flash ROMs from here, because flashing one of the International ROMs can brick your phone, and we don't want that.
Sent from my HTC One XL using xda premium

I will be staying here!! lol
Just to be sure I have this correct...
I downloaded Viper and the boot img.
I'm going to go back to my cmd prompts, install the boot img
I'm getting hung up with understanding how to place the zip on my phone storage...My computer isn't showing it as being a separate drive.
I keep getting 'failed' errors with everything in TWRP. If I try to mount as USB storage, my computer says it needs to be formatted...
When I try to do anything else it shows up with failed.

Ok here's what you'll need to do:
Boot your phone into the bootloader (hold power and volume down key together, release power after a second but keep holding volume down until you're in bootloader)
Select recovery
Once recovery boots up, connect to pc with usb cable, select mount in recovery menu, then select mount storage
Your phone should now show up on your pc as a drive, copy the entire ROM zip to your phone
Once it's copied, do eject and safely remove the drive from your pc, and hit unmount on your phone screen
Hit the home button (little house on bottom left) in recovery
From main recovery select wipe, once in wipe menu you must wipe cache, dalvik cache, factory reset, and system
Once you've wiped all those, hit the home button again
Select install from the main recovery menu, then find the ROM you previously copied to your sd card and select it, then swipe to install, let the install finish (please note: if you're installing viper, it will have a few options to select during the install, select the ones you want. But right at the end of the install process there will be a checkbox for "reboot device now" and it will be checked, make sure you uncheck that before you hit finish/done)
Now you'll see two options, wipe cache/dalvik is one, do that, once that's done hit the home button again
From the main menu, hit reboot, and then bootloader, your phone will now boot back into the bootloader and fastboot usb should show up in red text on your screen if your usb cable is still connected
Now back to the pc, Copy the boot.img from the ROM zip and place it in your fastboot folder
Make sure you're connected with usb and fastboot usb is showing on your phone screen
Open a command prompt in your fastboot folder on pc and type in:
fastboot devices
You should see a device number return in the command prompt, if that shows up you're connected properly, so now type in the following command:
fastboot flash boot boot.img
This will flash the boot.img to your phone, let it finish
Once that's done you can reboot and you should be able to reboot into your new ROM
Sent from my Evita

It's not mounting...just keep getting a message from my computer that the drive needs to be formatted before I can use it...
btw, ty for all your help on this you've been amazingly helpful!

You may have corrupted your sd card. You'll have to format it, which means you'll lose all your data off it unfortunately. Do that first and then start again.
Sent from my Evita

It worked!!!!!! It booted up into Viper!!!!! TY a million times over!!!!!!!!!!

Awesome, so glad to see you got it going :thumbup:
And no problem at all, my pleasure, this is what XDA is all about.
Sent from my Evita

Related

stuck in bootloop help plz

Hello,
I'm really hoping you can help me out, for I have got myself into a bit of a pickle.
I have been eagerly awaiting ICS, and downloaded mrT69's PG58IMG.zip ics.
Now my phone is stuck in a loop of booting, I'll hear the music start up and quietly brilliant screen and it just keeps repeating. I've tried a system recovery from the hboot menu no dice, I've tried recopying pg58img.zip and receive an error wrong CID or similar, I'm a total plonker for bothering and now i'm just desperate to simply get my phone back working.
Anyway help would be great,
The details I got from my phone are
HBOOT 1.27 000
10.14.9035 01 M
Jan 13 2012 17:33
* My phone is totally stock, this was the first thing I've attempted on it, and will be my last.
Please oh please help you're my only hope.
Cheers
What software version were you on before attempting all this? This is the most important thing to know before you try anything as it helps you find the RUU for you phone
Thanks for your reply,
Is there an easy way to find out what software?, I backed up my sdcard, if the info is stored, but it was the latest gingerbread I think, totally stock and the phone is a white sensation from asia, z710e I beleive, as you can tell I'm pretty hopeless with this stuff.
If you have done the flash please reboot to RECOVERY and WIPE the CACHE partition. After this reboot again to RECOVERY and you will see that everything is on ext4.
I'm working on a solution but I can't provide this at the moment to cover this problem during the flash process.
I would try this if you haven't already!!
shanman-2 said:
If you have done the flash please reboot to RECOVERY and WIPE the CACHE partition. After this reboot again to RECOVERY and you will see that everything is on ext4.
I'm working on a solution but I can't provide this at the moment to cover this problem during the flash process.
I would try this if you haven't already!!
Click to expand...
Click to collapse
When I select Recovery, I get the green circle arrow icon then a red triangle with exclamation mark, and nothing else.
*** I've now read up and now know that's normal, I've cleared the cache, same looping.
WatkinTench said:
Hello,
I'm really hoping you can help me out, for I have got myself into a bit of a pickle.
I have been eagerly awaiting ICS, and downloaded mrT69's PG58IMG.zip ics.
Now my phone is stuck in a loop of booting, I'll hear the music start up and quietly brilliant screen and it just keeps repeating. I've tried a system recovery from the hboot menu no dice, I've tried recopying pg58img.zip and receive an error wrong CID or similar, I'm a total plonker for bothering and now i'm just desperate to simply get my phone back working.
Anyway help would be great,
The details I got from my phone are
HBOOT 1.27 000
10.14.9035 01 M
Jan 13 2012 17:33
* My phone is totally stock, this was the first thing I've attempted on it, and will be my last.
Please oh please help you're my only hope.
Cheers
Click to expand...
Click to collapse
Repeating means rebooting ?
Your device was S-OFF?
It happened to me as well (or something like that) when installing a theme not suitable for GB, i am not going to tell you that i have the right solution but here what i did (and it worked!!) to recover my Sensation:
Look for and store in you sdcard:
- PG58IMG.zip (i add the file, it converts HBOOT version into 1.17.000)
- ROM Real_Stock_Experience (can give you dropbox link to download when you do not find it, it is 354MB)
Flash HBOOT 1.17.0000 from Recovery (when your device enters in HBOOT should ask you to appy update automaticly) and after that flash that ROM (it is a zip file), device shuold start normally, after that you can flash latest RUU.
Hope it helps.
Rgds,
francescrm said:
Repeating means rebooting ?
Your device was S-OFF?
It happened to me as well (or something like that) when installing a theme not suitable for GB, i am not going to tell you that i have the right solution but here what i did (and it worked!!) to recover my Sensation:
Look for and store in you sdcard:
- PG58IMG.zip (i add the file, it converts HBOOT version into 1.17.000)
- ROM Real_Stock_Experience (can give you dropbox link to download when you do not find it, it is 354MB)
Flash HBOOT 1.17.0000 from Recovery (when your device enters in HBOOT should ask you to appy update automaticly) and after that flash that ROM (it is a zip file), device shuold start normally, after that you can flash latest RUU.
Hope it helps.
Rgds,
Click to expand...
Click to collapse
thanks for replying,
I tried using the pg58img.zip you linked but I get the error
CID incorrect! Update fail! press Power to reboot.
WatkinTench said:
When I select Recovery, I get the green circle arrow icon then a red triangle with exclamation mark, and nothing else.
*** I've now read up and now know that's normal, I've cleared the cache, same looping.
Click to expand...
Click to collapse
wiggshome is having same problem on dev thread, keep an eye there as I have no other thoughts on your problem
WatkinTench said:
thanks for replying,
I tried using the pg58img.zip you linked but I get the error
CID incorrect! Update fail! press Power to reboot.
Click to expand...
Click to collapse
That is probably because you have got an Asian ROM, i can only suggest you to make your device SuperCid (11111111), that will allow you to flash it. Look in ROM forum to find out how, now i remember i also had to do it, done it with device in HBOOT and connected to PC via USB, you need to enter certain commands in DOS.
Rgds,
well, I've tried for the last hour or so to get it going, and no luck, I'm more than likely going to throw the phone into the wall, at least I'll have some satisfaction.
i've tried using adb and adb devices in cmd, but it won't find the device, It also was a major pain to get the drivers to work, it seems to have but it doesn't want to cooperate, also it's mentioned to enable usd debugging, how on earth do I do this when the phone won't even boot?, I'm really running out of patience with the damn thing,
I reliase a solution could be changing to superCID and installing that fix, but I can't even get the phone to be recognized in windows to change it?
so I'll try and provide more info, it's an Unbranded white sensation from Hong Kong, I simply want to get it back again, can I find a firmware that is for the cid and flash it to accept?,
I just don't know what to do now, certainly didn't think this would be my evening tonight, lesson learnt,
It only uses adb when the phone is booted, so that won't work
Go into HBOOT and let us know what it says above 1.27.0000
http://forum.xda-developers.com/showthread.php?t=1542555
Well I took a big punt and downloaded a ship rom i didn't know what ara meant but do now, my phone has turned a little middle eastern but I easily changed to english, which I remembered I had to do for my phone when I first purchased.
I made sure to get the same radio version, and have tested wifi and receiving calls, so as far as I can tell it functions again.
A very stressful evening,
but at least it's back and running,
appreciate everyones assistance
WatkinTench said:
I reliase a solution could be changing to superCID and installing that fix, but I can't even get the phone to be recognized in windows to change it?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1192300
IF it doesn't you can Manually put the phone in the bootloader/hboot mode
Did you follow Step 4 ?
Rgds,
WatkinTench said:
Well I took a big punt and downloaded a ship rom i didn't know what ara meant but do now, my phone has turned a little middle eastern but I easily changed to english, which I remembered I had to do for my phone when I first purchased.
I made sure to get the same radio version, and have tested wifi and receiving calls, so as far as I can tell it functions again.
A very stressful evening,
but at least it's back and running,
appreciate everyones assistance
Click to expand...
Click to collapse
Which one did you download?
RUU_Pyramid_HTC_ARA_1.45.415.5_Radio_10.56.9035.00U_10.14.9035.01_M_release_220005_signed
is the one I got, interesting enough, I tried the asian one afterwards and got a cannot update error, have tested phone and still works, so it didn't do anything but I must had some luck to download one that the phone liked.
Use 1.50.401.1 (latest unbranded EU RUU)
Fixing boot loop issue after "Incorrect CID" error
Thanks to "xl VipeR lx" for the SuperCID guide and Joaquinf's guide on How to flash ICS 3.32 firmware.
Okay. Here's a step-by-step guide to fixing this boot loop if you're in a confused state:
The issue is due to problems with your CID, which means we'll have to fix that. First, plug your SD card into the computer and delete the PG58IMG.zip file from your root, then put the SD card back into the phone and keep it turned off.
1) Download the ADB tool from http://forum.xda-developers.com/attachment.php?attachmentid=672540&stc=1&d=1312138079
2) Make a folder named "adb" on your C:\ drive, and unzip the file into this folder (the path should look like this: C:\adb)
3) Open command prompt and type: cd c:\adb (keep command prompt open)
4) Reboot the phone into fastboot and then connect it to your PC
(in a second, your fastboot screen should show "fastboot USB")
5) Enter the command "fastboot oem writecid 11111111" in command prompt
6) Enter the command "fastboot reboot-bootloader"
7) Enter the command "fastboot getvar cid" (make sure your CID is now 11111111)
8) Enter the command "fastboot reboot"
9) Turn off your phone, put the SD back in your PC and copy the v3.32 PG58IMG.zip back onto the root, then reinsert it into the phone.
10) Reboot back to fastboot and the firmware should now install without error.
11) Now you need to plug the SD back in the PC and delete the PG58IMG.zip from your root, then reinsert it into the phone again.
11) Finally, boot back into fastboot and you could now go on to Superwipe and then install your ICS ROM as you'd originally intended.
you have to install htc sync to use adb commands

[Q] Problems with Leedroid 2.0

Hi,
i came to the screen install form zip on sdcard
but then it starts installation
and shows : installation aborted
now i cant start the phone i always get tothis screen
with the red text this build is for ....
what can i do?
edit: now i am again there where i can install zip from sdcard, but now it doesnt recognize the sdcard. What can I do, because i the phoen does not take a microsdcard where I could put a new rom.
how can i get access to the internela storage now wihtour a os?
How did this happen ? Selecting a ROM to flash in recovery cant really cause so much damage if it fails. They usually fail because of a md5 mismatch or something.
try to mount the sd card and you can use adb to push files to it..
you could also try a full wipe..
I did several things. I rooted and unlocked the device
and now it does not boot.
Everytime I tired to flash leedroid or stock rom with choosing install form zip
installation get aborted.
I am only able to get into the boolloader and into the recovery.
how can i restore the phone?
wipe and recovery is not possible i always end in this screen
with the red text.
edit: i think i try to get into booloader and copy another file version with adb to the sd card and hope it was a download error.
but why the hell then did both the leedroid 'AND the stock rom fail?
did you flash the boot.img BEFORE flashing leedroids ROM ??
If not i suggest trying that, If that fails, Just run an RUU and start from the beginning
Thanks for the Idea,
my problem is that i cant get access to the memory wihtout a working rom
on it And now i also dont get into the recovery CWMS.
I thouzhg power+vol up would do it but it doesnt work
I think i destroyed my brand new phone.
but thanks for helping.
It's not broken.
Try Power + Vol. down. Possibly you need to retry this several times to get into the bootloader.
its not destroyed dont worry..
Run an RUU and all will be good again. Whats your CID ?
That is the problem I cannot put up software on the device
so how should i run a ruu?
Where can i get the CID from wihtout starting the phone?
I hope you have a trick how I can save the device.
angeloski said:
That is the problem I cannot put up software on the device
so how should i run a ruu?
Click to expand...
Click to collapse
You run it from your Windows desktop. Download your appropriate RUU here for example (as it takes a loooooong time).
Connect your phone to your computer via USB.
Double Click the RUU-file.
Answer the Questions and the update will start.
Remember: Your device will be reset to factory default and your data on sd card will be gone so.
Edit: You will still have to start it with power + vol. down buttons pressed (as far as I remember).
angeloski said:
That is the problem I cannot put up software on the device
so how should i run a ruu?
Where can i get the CID from wihtout starting the phone?
I hope you have a trick how I can save the device.
Click to expand...
Click to collapse
To get into the bootloader try this.
Press and hold volume down, then power. Hold both down together for 5 secs, let go of the power button then press the power button several times. This always works for me.
If this works then your phone is easy to fix.
Maybe you could try to reflash the boot.img from leedroid via fastboot.
Then flash a proper recovery.img via fastboot (I use clockworkmod)
As I heard you could then push the rom.zip via Adb the sdcard while in recovery. Last step would be install zip from sdcard.
Sent from my HTC One S using XDA
Have you installed supersu via install ZIP from sdcard? I think this needs go be installed before installing the Rom. I Don't Know it exactly. But like this it worked for me when coming from stock rom. Thats how it worked for me:
1. Unlock bootloader via HTCDev
2. flash recovery image via fastboot
3. Install SuperSU from zipfile in recovery
4. Flash boot.img from Leedroid
5. Install Leedroid from sdcard
So maybe you missed one of the steps.
Sent from my HTC One S using XDA
to get CID go into fastboot and type in cmd window ''fastboot getvar cid''
If your phone is branded, you will need that branded RUU, So i assume you will need o2 Germany RUU
Reflash recovery in fastboot, should give you access to sdcard back.
Sent from my HTC One S using xda premium
i did the same thing to my one s yesterday... followed all the steps for leedroid n got same frustration u have...
theres a nandroid file in the dev section... fastboot the boot.img and the recovery.img
ya phone WILL boot back up
ok guys ty for cheeering me up.
i wil try it with a ruu, where can i find a ruu for my htc one s.
the link in the previuos post ist offline.
i think it was 1.78.407.x when i looked the last time in my handy.
thanks
so my cid is
C:\Android\android-sdk\platform-tools>fastboot.exe getvar cid
cid: O2___102
finished. total time: 0.003s
Like i said it is a O2 i hope this helps finding the ruu
well check the Shipped ROM thread.. If its not there you can ask the OP Football if he has it or can get it..
Some RUU's cost $13 so if you know someone else who wants it, you could split the cost ?
so far, now am in the recovery flash but it is the same
count mount /sdcard
how can i put a file onto the sdcard when i have no access?
partionoing sdcard doesn't help
i was looking for this boot.img and recovery.img which was posted before
i dont find it can someone link me to it if he knows what was meant?
thanks
edit: i was desperate and tried:
fastboot oem enableqxdm 0
fastboot oem eraseconfig
but the second order was not successful
ist there another way to fix this usb brick
and to get access to /sdcard
new edit: now i write also in the help thread (noob friendly) i hope that is ok.
Did you already try this
http://forum.xda-developers.com/showthread.php?t=1667929
Or this
http://forum.xda-developers.com/showthread.php?t=1630459
Sent from my HTC One S using XDA

Rooted 2.20 now cant boot my phone

Hi Everyone,
So i followed all the steps to temp root 2.20 including successfully installing TWRP (Team Win Recovery Project). I then downloaded the CM10 rom and extracted the boot.img as per posts and rebooted into the bootloader and flashed the boot.img from CM10 via Fastboot. However after doing then rebooting to Recovery mode in order to flash the ROM, i get stuck in the red text where it gives you a warning about it being in development mode or something.
I am able to successfully boot into the bootloader via Power+down volume. Additionally I am able to boot into the TWRP recovery just fine, however I am lost and have no clue how to restore my phone to either the CM10 ROM or most importantly at least to stock working condition.
When i got to mount the SDCARD via twrp normally i would get a pop up on my screen and allow me to access my SD card, now i get a pop up just telling me that i need to format my SD card first. I'm afraid some how my SD card got wiped or something.
Can someone please walk me through the steps on how to restore my phone. Please if possible i would appreciate using LAME terms as i do not have any experience as you can tell i screwed up :/ Can you please listed step by step instructions including commands for Fastboot/adb etc etc if needed. Thank you very much for your help and support.
I've typed and retyped a response to help. I'm so tired and my brain is mush. (More so than normal) if you can't find any resolution by morning? Pm me and I'll try and help. Something about pluggin the USB in The back of your pc something something....... snore
Sent from my One X using xda premium
subarudroid said:
I've typed and retyped a response to help. I'm so tired and my brain is mush. (More so than normal) if you can't find any resolution by morning? Pm me and I'll try and help. Something about pluggin the USB in The back of your pc something something....... snore
Sent from my One X using xda premium
Click to expand...
Click to collapse
I know you tried to help, but it appears now I have bricked the phone. Hopefully i can fix it as i still have access to Bootloader and TWRP recovery. I'll PM you in the morning, thank you.
dont factory reset in bootloader. only factory reset in twrp. sometimes evita has a hard time getting into recovery from bootloader. just keep trying to get into recovery from bootloader. also even if your phone doesn't boot all the way adb sometimes still works. so try "adb reboot recovery" while its trying to boot.
if you did corrupt your sdcard try this method to get it fixed without having to run ruu.
[How to] Fix corrupt/unmountable internal storage on the HTC One X/XL
when you get your sdcard fixed remember to wipe everything and then copy cm10 and gapps to your sdcard and flash. since boot.img is already flashed you shouldn't need to do it again.
you did flash boot.img as "fastboot flash boot boot.img"? i made the mistake of flashing boot.img to recovery instead of boot. i was freaking out. just to make sure flash recovery again "fastboot flash recovery openrecovery-twrp-2.3.1.0-evita.img"
DvineLord said:
dont factory reset in bootloader. only factory reset in twrp. sometimes evita has a hard time getting into recovery from bootloader. just keep trying to get into recovery from bootloader. also even if your phone doesn't boot all the way adb sometimes still works. so try "adb reboot recovery" while its trying to boot.
if you did corrupt your sdcard try this method to get it fixed without having to run ruu.
[How to] Fix corrupt/unmountable internal storage on the HTC One X/XL
when you get your sdcard fixed remember to wipe everything and then copy cm10 and gapps to your sdcard and flash. since boot.img is already flashed you shouldn't need to do it again.
you did flash boot.img as "fastboot flash boot boot.img"? i made the mistake of flashing boot.img to recovery instead of boot. i was freaking out. just to make sure flash recovery again "fastboot flash recovery openrecovery-twrp-2.3.1.0-evita.img"
Click to expand...
Click to collapse
Yes i did fastboot flash boot boot.img from within the Bootlader. FYI that boot.img was from inside the CM10 zip file. I belive my SD card is corrupt i will check out that link. FYI I am able to get into Recovery mode form the Boatloader if i chooser recovery. However since the SD card seems messed up i can't access it currently. Also I tried to use the method to install the CM10.zip file using TWRP recovery. That recovery has a GUI and you can click on the INSTALL button and choose the zip file you want to install, however it errors out.
What is the proper way to flash a rom when i am in the TWRP recovery? Can you provide me with the commands/steps? Thanks for all your support guys.
movadoevo8 said:
Yes i did fastboot flash boot boot.img from within the Bootlader. FYI that boot.img was from inside the CM10 zip file. I belive my SD card is corrupt i will check out that link. FYI I am able to get into Recovery mode form the Boatloader if i chooser recovery. However since the SD card seems messed up i can't access it currently. Also I tried to use the method to install the CM10.zip file using TWRP recovery. That recovery has a GUI and you can click on the INSTALL button and choose the zip file you want to install, however it errors out.
What is the proper way to flash a rom when i am in the TWRP recovery? Can you provide me with the commands/steps? Thanks for all your support guys.
Click to expand...
Click to collapse
install/install from zip/browse to your zip/slide to flash (they really should patent that)
now most of us, to do a clean flash, we'd go into the "wipe" menu in TWRP before flashing , factory reset, wipe cache, wipe dalvik cache, wipe system. then we flash our rom.
hope that cleared it up!
Sent from my One X using xda premium
You won't be able to flash anything until you fixed your sdcard using the method in that link.
Ptesmoke where have you been? DvineLord is the only one been helping here. The Q&A thread is a mess. where is edditsync chongo, rohan and the other superhero's. I feel like Hawkeye trying to shoot sh#@ down with a bow and arrow. Waiting for ironman, hulk, Thor and the other avengers to get real sh#@ done. I'm tired going to sleep now.
Sent from my One X using xda premium
ptesmoke said:
install/install from zip/browse to your zip/slide to flash (they really should patent that)
now most of us, to do a clean flash, we'd go into the "wipe" menu in TWRP before flashing , factory reset, wipe cache, wipe dalvik cache, wipe system. then we flash our rom.
hope that cleared it up!
Sent from my One X using xda premium
Click to expand...
Click to collapse
I tried to fixed corrupted SD card as per video. however after flashing the recovery.img via fastboot when it wants me to do a factory reset instead of doing the factory reset it just goes back to the HTC brilliant screen with the red warning text and sits there. If i go to twpr recovery and click on install i can't access me zip currently due to sd card issues.
Is there a way to format via PC since it lets me as long as I am in twpr and just put stock files/folders onto the SD card? Or is it possible to install the 2.20 ruu again? I re-downloaded it form HTC's site while I am in twrp however I cannot install it won't detect my phone. Thanks for your help.
"fastboot oem lock" then run ruu. ruu gets run in fastboot.
after the ruu, reunlock bootloader and flash twrp, copy cm10 and gapps to your sdcard, flash boot.img in fastboot, wipe everything except for external storage in twrp, flash cm10 and gapps in twrp, then reboot.
If you can get into twrp and go to mount, mount usb storage and connect your phone windows should prompt you to format the SD card.
Once that's done you can drag and drop the rom you want to flash then boot into fastboot and flash the boot.img.
If you want to run the ruu you need to relock the bootloader first.
To do that you must go into fastboot usb and then type fastboot oem lock.
Sent from my HTC One XL using xda premium
DvineLord said:
"fastboot oem lock" then run ruu. ruu gets run in fastboot.
after the ruu, reunlock bootloader and flash twrp, copy cm10 and gapps to your sdcard, flash boot.img in fastboot, wipe everything except for external storage in twrp, flash cm10 and gapps in twrp, then reboot.
Click to expand...
Click to collapse
I'm sorry i'm not too tech savy. Can you clarify how to Fastboot OEM lock. Assuming i just need to be in fastboot mode and run a command in command prompt?
Also once that is done how can i run RUU via fastboot? Right now i have HTC RUU for 2.20 from august that i downloaded from their site and not sure how i can have it detect my phone. If you could clarify and explain those steps in Lame terms i would greatly appreciate it, thanks in advance.
movadoevo8 said:
I'm sorry i'm not too tech savy. Can you clarify how to Fastboot OEM lock. Assuming i just need to be in fastboot mode and run a command in command prompt?
Also once that is done how can i run RUU via fastboot? Right now i have HTC RUU for 2.20 from august that i downloaded from their site and not sure how i can have it detect my phone. If you could clarify and explain those steps in Lame terms i would greatly appreciate it, thanks in advance.
Click to expand...
Click to collapse
That's the command you do and the ruu is an exe file so get into fastnoot on your phone from bl and run the ruu after you've locked the bootloader
Thank you both will try that now.
Hey guys thanks for all your help and your support it worked. I had the wrong CM10 file instead of Evita i had the other one :/ That was the issue all along ugh... but all resolved could of not have done it without your support. Thanks!! I can now finally go to bed.. been at it since 10pm, now 3:11am
Maybe you can help me . I'm having the same problem. The problem is, everytime I try to use any fastboot commands, it'll say "waiting for device". I'm stressing out.
marcur12 said:
Maybe you can help me . I'm having the same problem. The problem is, everytime I try to use any fastboot commands, it'll say "waiting for device". I'm stressing out.
Click to expand...
Click to collapse
Make sure you have the right drivers installed, download the latest htc sync from htc's website.
Install HTC sync connect phone and let the drivers install, then make sure you close htc sync from the system tray and try again.
Like DvineLord said below make sure you're in the bootloader then select Fastboot once selected it should say in red writing Fastboot USB.
fastboot only works in bootloader btw
Hit the thanks button for the people helping you fix your boo boos.
If you can type it, click it for them, least you can do in return.
WR
Sent from my HTC One X
Sent from my HTC One XL using Tapatalk 2

Stuck in bootloop/No ROM boots

So long story short, I got my One x today (AT&T) & since this is my 2nd One x (my first won got destroyed in a car crash) I decided to root/flash it. I'm assuming just like all the other new comers to this forum, I used the Toolkit by Hasoon. I was able to unlock the phone along with flashing Clockworks touch recovery. Now here's where things got all ugly and just fustrating; I flashed a ROM (Carbon's most recent ROM) and then rebooted just like you would any other ROM, but it didn't boot. I Tried flashing another ROM (Scrosler Clean ROM) & the same thing. Now my phone isnt bricked; I can mount my sd via recovery & whatnot & also use the bootloader menu (fastboot). Now I've been trying to bring my phone back to life via the RUU's, but idr what version I had. I just tried 2.20 & it failed.
Heres my Bootloader info
****TAMPERED****
****UNLOCKED****
EVITA PVT SHIP S-ON RL
HBOOT-1.14.0002
RADIO-0.19AS.32.09.11_
OpenDSP-v29.1.0.45.0622
eMMC-boot
June 11 2012, 14:36:28
Any help would be appreciated!
thanks :good:
Extract boot.IMG from ROM and flash in fastboot. I highly recommend s-off to negate that issue altogether.
Sent from my One X using xda premium
How would I flash the boot.img in flashboot? & I'm not sure I'm rooted
Boot Image Flashing
Hey man I had the same problem..I'm kinda new too this as well. I used the boot image flashing tool from Team Win. You extract the ROM somewhere like your download dir into it's own folder. Then I copy and paste the boot image into the folder of the team win flashing tool, You'll see it's really self explanatory. Put the phone in fastboot usb and the click where it says "run me from fastboot" it will flash the boot img for you. then go back into recovery and flash the rom. or the other way around. Pretty sure I've done it both ways on accident. I just recently did the facepalm s-off, and that wasnt too hard just copy and paste. I havent tried flashing anything since the s-off but I cant wait to see how it goes! Hope this helped. You probably got it all figured out by now. Good luck.
Edit; Ok, so attached to this post is the zip file you will need. I downloaded the 2.3.3 twrp img file, since that is the most stable for me. If you want to upgrade to 2.5, then be my guess, but others say it is a problem. i have flashed sense roms and aosp roms with no problems. also, pleae read both paragraphs before attempting to do something. if you do not understand, feel free to comment or pm me. i tried to make it as simple as possible.
So first off download the zip, and extract the folder to a simple location (desktop or c:\). i am going to assume you extracted it to c:\. open up a command prompt by going to Start and typing in "cmd" a black window should pop up. type in "cd c:\rootevita." you are already rooted, but it was already the name of my folder. anywho, turn your phone completely off, and go into the bootloader. i assume you know how to do this, since you were able to read off your hboot details. it is the white screen with colorful text. then select fastboot in red. once a usb connection is plugged in, it should turn to fastboot usb. now in the command prompt (black window on the pc), you need to type fastboot flash recovery openrecovery-twrp-2.3.3.0-evita.img (hint: you can type open and hit tab, and it will finish it for you). now you have twrp installed. now boot into recovery, and start flash a rom.
if you were on hboot 1.14 or higher, then you also need to flash the boot.img file. the boot.img is found within the zip rom file that you download. just drag that out, and put it in the rootevita folder. repeat above steps to get into fastboot usb, but this time, type in fastboot flash boot boot.img and once it says OKAY, then just reboot into the system, and it should boot up. the initial start up is ALWAYS long, so don't panic. also, I recommend flashing some gapps. can't remember which rom you wanted, but im pretty sure you need gapps.
DollarStrawz said:
Hey man I had the same problem..I'm kinda new too this as well. I used the boot image flashing tool from Team Win. You extract the ROM somewhere like your download dir into it's own folder. Then I copy and paste the boot image into the folder of the team win flashing tool, You'll see it's really self explanatory. Put the phone in fastboot usb and the click where it says "run me from fastboot" it will flash the boot img for you. then go back into recovery and flash the rom. or the other way around. Pretty sure I've done it both ways on accident. I just recently did the facepalm s-off, and that wasnt too hard just copy and paste. I havent tried flashing anything since the s-off but I cant wait to see how it goes! Hope this helped. You probably got it all figured out by now. Good luck.
Click to expand...
Click to collapse
That's what I'm talking about. A new person helping another new person. With correct info.
Any who, to op. You may want to download twrp. Or team win. Don't have a link at the moment, but I'm sure its somewhere on this forum. Then go back to your boot loader select fastboot, and go to the tool and flash the recovery IMG. Then like everyone says, fast boot the boot image as well. When I get to my PC, I will upload a zip for you that helped me out
Sent from my Carbon-ize Evita using xda-developers app

[Q] [HELP] Another soft-bricked AT&T HTC One X

So my son rooted his AT&T HTC One X (Evita) and put AOKP 10.something (doesn't remember) but never got 4G data to work. He lived with it that way for a while because WiFi works and he has plenty of access at college. But recently he got fed up and wanted to go back to his stock rom to get 4G working again. He doesn't remember exactly what he did but he recalls going into recovery, wiping the cache, then updating TWRP to 2.5. That's when things went wrong. We get:
HTC
quietly brilliant
This build is for development purposes only...
It sits this way for a few minutes then the screen goes blank, but it appears the phone is still on because, when plugged-in to the USB port on my PC I don't get the alert sound that USB has disconnected. Then it reboots. Does this over and over.
I can get into the bootloader by holding-down power and volume-down.
Bootloader tells me:
*** TAMPERED ***
*** UNLOCKED ***
EVITA PVT SHIP S-ON BL
HBOOT-1.14.0002
RADIO-0.19as.32.09.11_2
OpenDSP-v29.1.0.45.0622
eMMC-boot
June 11 2012, 14:36:28
HBOOT​
I can also get into TWRP, but can't find any ROMS to install.
I've rooted a few of my androids and can follow instructions, but I'm not real familiar with all the tools and acronyms. Also, I have zero experience with the HTC One X. If there's a newb's guide for unbricking the Evita please point me in the right direction. Otherwise, please be gentle with me and I'll try not to make an ass of myself. ;^)
So far I've downloaded HTC Sync and Minimal ADB/Fastboot. The phone is plugged-in and charging. So I plan to pick up on this tomorrow night. If I understand things:
Install the drivers
Connect the phone
Pray that it is still in USB Debugging mode
Verify ADB detects the phone
Use ADB to push my choice of ROMs to the root of the sdcard internal storage device
Go into TWRP
Wipe the entire phone including system
Install the ROM
Wave dead chicken over head while singing the theme song from Evita
Reboot when done
Is that right?
Or should I use flashboot (never have before)?
Does "*** UNLOCKED ***" on the bootloader screen mean the bootloader is unlocked (as opposed to carrier unlock)?
Should I update TWRP to 2.6 first? If so, can I just push with ADB and Install with TWRP 2.5??
Do I need to S-OFF to flash TWRP or ROM? If so, how?
What the heck is an RUU file and do I need one?
And finally for tonight, while I know there's no such thing as the "best" ROM, which ROMs should I look at if my priorities are stability, functionality and battery life (most to least important)? I tend to put a ROM on my phone and not change for months, even years.
Thanks in advance for any assistance.
http://forum.xda-developers.com/showthread.php?t=1671237
That will help you
Sent from my HTC One XL using xda premium
Adb won't work because that requires the ROM to be booted into an os. You don't need it yet anyhow. You will need fastboot though. You'll want to get rid of TWRP 2.5 because it's full of bugs. Here's how to install TWRP 2.6:
Download TWRP 2.6 from here. Put the file in your fastboot folder. Connect phone in fastboot mode, open command prompt from within fastboot folder, issue the following commands:
Code:
fastboot flash recovery "filename.img"
(the exact filename, minus the talking marks)
Code:
fastboot erase cache
Code:
fastboot reboot-bootloader
Now you can enter recovery on your phone. Select mount from the menu, then mount usb storage while connected to a pc, it will now show up as a removable drive so you can copy a ROM to the device. For stability, stock ROMs are the best option, you'll find those here.
One you've downloaded a ROM, you need to extract the boot.img from the root of the zip and place it in your fastboot folder on your pc, we'll come back to that later. Now copy your entire ROM zip onto the phone. Enter recovery, do a full wipe (cache/dalvik cache/factory reset/system), go to install menu, install ROM.
Now, reboot to bootloader, connect to pc, make sure it shows fastboot usb on the screen. You now need to flash the boot.img because the phone is s-on. Do that by entering this command:
Code:
fastboot flash boot boot.img
Now you should be able to reboot the phone into the ROM.
Sent from my Evita
Thanks both Ken and Timaaa. You guys rock.
I'm leaning towards giving utkaar099's Stock/Deodexed JB 4.1.1 ROM and the HTC ATT 3.18 radio a try. I haven't figured S-OFF yet but once I get the ROM on and working I'm sure I'll figure it out.
I wanted to say thanks again for the help. The phone is now running again with the stock/deodexed JB 4.1.1.
I haven't tried flashing a radio file yet. I'm unclear if I have to S-OFF before flashing the radio. Still reading, but if you have a chance to answer this question I'd appreciate it.
S-off isn't required for flashing radios, you can just flash them in recovery. Just make sure you don't flash radio+RIL, or the cm radios, and you'll be fine.
Sent from my Evita
Thanks again timmaaa.
My pleasure :thumbup:
Sent from my HTC One XL using XDA Premium 4 mobile app

Categories

Resources