i can not root my mobile micromax a110 i used Root_with_Restore_by_Bin4ry_v15 but it says succes in desktop but in mobile its not rooted
then i tried(pressed vol up+down+power button and in recovery mode)UPDATE-SuperSU-v1.04.zip also but it says installation aborted please help me to root
in down i have submitted bin4ry and update zip
i used this properly as mentioned in website
Related
i tried to root my Micromax A110 with official Jelly Bean with this guide
DRoidiser.com/2013/02/root-jelly-bean-updated-Micromax-a110
i have done everything they said i clicked download and clicked yes for new window and i connected my phone with out battery
but the flashing ended with an error SOC verification failed
please help
i have also tried to root with Bin4ry it showed everything successful but phone was not rooted.
bro try with battery... may b working....if not sure working say me ur flash tool version and use windows xp or windows 7????... nd upload screen shot....
dibinvm said:
i tried to root my Micromax A110 with official Jelly Bean with this guide
DRoidiser.com/2013/02/root-jelly-bean-updated-Micromax-a110
i have done everything they said i clicked download and clicked yes for new window and i connected my phone with out battery
but the flashing ended with an error SOC verification failed
please help
i have also tried to root with Bin4ry it showed everything successful but phone was not rooted.
Click to expand...
Click to collapse
you have rename the file to recovery.img when selecting, and properly follow those steps provided.
I have rooted my device from there only,
Alright so I tried rooting my micromax a110 (canvas 2) . At first I used bin4ry. I followed all instructions properly and after the message shows have fun and phone rebbots but no super su binaries are installed. I uesd root checker to see if device is rooted but it shows that its not rooted !! I even used SP flash tools , when i boot into cwm recovery to manually install super su from sd card , it starts installing but after 2 seconds it shows "installation failed" I am new to android rooting and all so please help ! And also can you install a prerooted rom without rooting your device .!
If u are unable to root with the software via debugging mode than only option left is via recovery mode.......this happened with me also.....if u have already cwm recovery then rename the downloaded su zip file as update.zip and place it in SD card...... boot into cwm recovery mode choose the option install zip and select SD card and then update.zip.....it will be successfully installed......
And answer to ur question ...
It does not matter on which rom u are ....if the zip u download is pre rooted and cwm flash able just place it in zip card and follow the steps..
Wipe data/ factory reset;mounts and storage-->format system;clear all cache ....then choose install zip.....after installation come back to cwm recovery and again clear all cache ......u r ready to go...
Hit thanks if helped....
Sent from my Micromax A110 using xda app-developers app
Try it!!!!!!!!
jkinny1 said:
Alright so I tried rooting my micromax a110 (canvas 2) . At first I used bin4ry. I followed all instructions properly and after the message shows have fun and phone rebbots but no super su binaries are installed. I uesd root checker to see if device is rooted but it shows that its not rooted !! I even used SP flash tools , when i boot into cwm recovery to manually install super su from sd card , it starts installing but after 2 seconds it shows "installation failed" I am new to android rooting and all so please help ! And also can you install a prerooted rom without rooting your device .!
Click to expand...
Click to collapse
do the procedure told by pragun1993. if not successful then download supersu from playstore and open app and install binaries using that app or flash old version of supersu (namely supersu).........
It is running stock Android 4.1.1 out of the box.
Root_with_Restore_by_Bin4ry_v31 ends up with "mount: permission denied (are you root?)" in "Normal" mode. On going through it step by step, I found that this error occurs on the line where the "/system" partition is being remounted as RW.
Found "Poot" somewhere on the internet, tried and ended up with "Error Code 18: su binary was not written". I think it doesn't work with Jelly Bean anyways...
Tried "Motochopper" too, the phone restarts during "/data/local/tmp/pwn" execution...
Tried searching here and there but no success.
Any suggestions?
Root and CWM for Karbonn Smart A26
Use the following post
http://forum.xda-developers.com/showpost.php?p=38337401
I used it and I have CWM and Root on my Karbonn Smart A26
In brief:
Generate Recovery image (attached)
Flash Recovery Image with SP FlashTool
Boot in Recovery mode
Connect to MTK Droid Root & Tools
Go to "root,backup,recovery" tab and install Root and choose Super user app
revant said:
Use the following post
http://forum.xda-developers.com/showpost.php?p=38337401
I used it and I have CWM and Root on my Karbonn Smart A26
In brief:
Generate Recovery image (attached)
Flash Recovery Image with SP FlashTool
Boot in Recovery mode
Connect to MTK Droid Root & Tools
Go to "root,backup,recovery" tab and install Root and choose Super user app
Click to expand...
Click to collapse
Thank you so much!
Cant find the drivers.... pls help
hey guys. i was also trying to root my Karbonn Smart A26... but m unable to find the drivers for my device. even d karbonn homesite is not displaying the drivers... n due to this, while flashing recovery using SP flash tool, the procedure gets stuck up at searching. Pls help.. thanks in advance...
mtorero4 said:
hey guys. i was also trying to root my Karbonn Smart A26... but m unable to find the drivers for my device. even d karbonn homesite is not displaying the drivers... n due to this, while flashing recovery using SP flash tool, the procedure gets stuck up at searching. Pls help.. thanks in advance...
Click to expand...
Click to collapse
Mediatek VCOM Drivers Check out here : http://forum.xda-developers.com/showthread.php?t=2206421
Important Note: Your phone should be OFF before connecting it to the computer, after pressing Download button in SP Flashtool. OFF means pull out battery and put it in again. This ensures the phone is OFF. If switched OFF phone is connected for charging/usb the phone turns ON; phone is not fully OFF even if nothing is shown on screen. So pull out battery. ONLY If you connect the OFF phone to computer you will be able to detect the device and install Mediatek Vcom drivers as well as use flashtool.
revant said:
Use the following post
http://forum.xda-developers.com/showpost.php?p=38337401
I used it and I have CWM and Root on my Karbonn Smart A26
In brief:
Generate Recovery image (attached)
Flash Recovery Image with SP FlashTool
Boot in Recovery mode
Connect to MTK Droid Root & Tools
Go to "root,backup,recovery" tab and install Root and choose Super user app
Click to expand...
Click to collapse
I still wonder how you got the recovery image...
My phone is rooted successfully thanks to your help, but I would love to learn more.
team.radiant said:
I still wonder how you got the recovery image...
My phone is rooted successfully thanks to your help, but I would love to learn more.
Click to expand...
Click to collapse
Follow step 7 of the thread I posted before: http://forum.xda-developers.com/showpost.php?p=38337401
In brief :
Generate ROM_ with SP FlashTool
Prepare ROM_ in MTK Droid Root & Tools
Build CWM
USB Drivers
revant said:
Use the following post
http://forum.xda-developers.com/showpost.php?p=38337401
I used it and I have CWM and Root on my Karbonn Smart A26
In brief:
Generate Recovery image (attached)
Flash Recovery Image with SP FlashTool
Boot in Recovery mode
Connect to MTK Droid Root & Tools
Go to "root,backup,recovery" tab and install Root and choose Super user app
Click to expand...
Click to collapse
Can U Please Attach the USB Drivers For Karbon A26
mukesh kitty said:
Can U Please Attach the USB Drivers For Karbon A26
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2206421
help
I flashed cwm but it doesn't reboot to recovery plz help,!!!!!
team.radiant said:
It is running stock Android 4.1.1 out of the box.
Root_with_Restore_by_Bin4ry_v31 ends up with "mount: permission denied (are you root?)" in "Normal" mode. On going through it step by step, I found that this error occurs on the line where the "/system" partition is being remounted as RW.
Found "Poot" somewhere on the internet, tried and ended up with "Error Code 18: su binary was not written". I think it doesn't work with Jelly Bean anyways...
Tried "Motochopper" too, the phone restarts during "/data/local/tmp/pwn" execution...
Tried searching here and there but no success.
Any suggestions?
Click to expand...
Click to collapse
hi bro
can u pls anyone share me the original "void.fstab" file of karbonn smart A26 mobile which willl be in system/etc folder...
As i tried swapping for low storage problem,from then it was corupted and now i want to replace it with original file as i havnt backuped it.
---------- Post added at 05:24 PM ---------- Previous post was at 04:39 PM ----------
team.radiant said:
It is running stock Android 4.1.1 out of the box.
Root_with_Restore_by_Bin4ry_v31 ends up with "mount: permission denied (are you root?)" in "Normal" mode. On going through it step by step, I found that this error occurs on the line where the "/system" partition is being remounted as RW.
Found "Poot" somewhere on the internet, tried and ended up with "Error Code 18: su binary was not written". I think it doesn't work with Jelly Bean anyways...
Tried "Motochopper" too, the phone restarts during "/data/local/tmp/pwn" execution...
Tried searching here and there but no success.
Any suggestions?
Click to expand...
Click to collapse
hi bro,can u pls give me karbonn a26 vold.fstab orginal file
Custom Recoveries are Here!
Gello! Karbonn A26 Users Here are the Custom Recoveries For Karbonn A26 Ported Be Me...
Includes:-
★Philz
★TWRP
★CWM
★Carliv
★Cannibal
etc...
Please Press Thanks If this Post Helped!
Here is the Download Link To The Thread :- :good:
★http://forum.xda-developers.com/android/development/karbonn-a26-custom-recoveries-t2828608★
Try VROOT
VROOT works with this device...
VROOT is very good software !!!!
download from my signature
:good::good::good::good::good::good:
How to install recovery.img ?
revant said:
Use the following post
http://forum.xda-developers.com/showpost.php?p=38337401
I used it and I have CWM and Root on my Karbonn Smart A26
In brief:
Generate Recovery image (attached)
Flash Recovery Image with SP FlashTool
Boot in Recovery mode
Connect to MTK Droid Root & Tools
Go to "root,backup,recovery" tab and install Root and choose Super user app
Click to expand...
Click to collapse
Hello Friend, can you tel me how to install recovery image that you have generated?
How to increase incoming call volume in custom rom lollipop in karbonn a26
Dear All,
I have installed custom ROM lollipop in my karbonn A26.
but incoming ring volume is very low so please help me how to increase volume with Es file explorer or terminal command.
I PURCHASED CELKON A9+
ANDROID VERSION : 4.0.3
BASEBAND VERSION : BASE_W12.17 sc6820_sp6820 04-20-2012
KERNEL VERSION : 2.6.35.7
SOFTWARE VERSION : W22.20_P20
HARDWARE VERSION : S8-20-GB-V2.1
Chipset Spreadtrum SC6820
CPU 1 GHz
Internal 512 MB ROM, 256 MB RAM
I WANT TO INSTALL ROOT AND CWM
PLEASE TELL HOW TO INSTALL THE ABOVE
ALSO I ATTACHED MY MOBILE PHOTO
Also help to recover my firmware
Please tell how to recover my current firmware on CELKON A9+
or where to download the firmware and the tool how to flash
rooting celkon a9+
hey same prob here..i am also trying to root my celkon a9+...i ve tried all methods...but all my efforts are vain..i think it is unrootable...:crying:
same to me
I tried Z4root, Framaroot, unlockroot pro and more still nothing to work for root
Hai can you tell, is any where celkon A9+ firmware exist to flash and the tool to flash etc
any way thank you for replay, it's a good budget mobile
no luck
hey..any luck rooting your phone..please inform me yar.. :good:
New Improvemnt
Root on Celkon A9+
download
Root Android Build Binary
http://www.mediafire.com/download/v8l49avrytwg46f/Root_Andro-Build_Binary.7z
Universal Android USB Driver
http://adbdriver.com/downloads/
To Practical
install Universal Android USB Driver
step 1) Enable USB Debug (setting/Application/Development)
step 2) switch off mobile and remove battery
step 3) after 10 seconds re-insert battery and wait for 10 seconds
step 4) Activate download/Recovery Mode by hold volume down + power (then you can see android logo there)
step 5) plug USB and wait to install complete
step 6) open device manager (in windows 7 open control panel/device manager) and drag down Universal Serial Bus Controllers check spectrum device emulator is there
step 7) extract Root_Andro-Build_Binary.7z on C:\Root
step 8) open RunMe.bat (on extract folder)
step 9) press 1 for Normal and Enter to Continue and Please wait the process complete
step 10) you phone will flash and reboot the process
step 11) if it complete remove battery and reinsert and wait for 10 second to power on
congratulation you ROOTED
complete your celkon A9+ rooted and superuser can see on application
open superuser and install binary
that's all
you can more root option on http://www.srsroot.com/ (but experimental)
continue
after root complete open superuser and install su binary after that, restart
and take a factory data reset (setting/backup and reset/factory data reset default password is 1234, it will not work, but redirect to recovery option)
take wipe data/factory reset and also take backup on CWM menu (backup means "backup your firmware" using cwm recovery option)
after that you can save your firmware for your future use
thank you
Omg..Tq man ..i love u..:laugh:
hey..could u send me a video tutorial..plzz..m a nube
software download A9+
:victory::victory:
baludock said:
Please tell how to recover my current firmware on CELKON A9+
or where to download the firmware and the tool how to flash
Click to expand...
Click to collapse
I have rooted celkon A9+
I have rooted my frnd's celkon A9+ mobile guys.. just taken 2min to root.:laugh::laugh::laugh::laugh::laugh:
Try VRoot app guys.. Download it from google.
1. download and install vroot on your pc and launch it..
2. Then connect your celkon A9+ with your original celkon usb cable to your system.
3. It wil detect your device automatically.
4. Then click Root button, thats it.
Your device will reboot in few seconds.. then you can see super user on your device.
App itself display you the msg after your device got rooted. you can also check with root checker app.
you can find it on play store.
celkon recovery mode
thanx for the rooting procedure i need some help....
i have rooted my celkon a9+ but i am unable to enter the recovery mode i tried to switch off my phone then switching it on by pressing the volume down button and powsr button but it showed a triangle and a phone i thing its an error symbol then after some time it reboots to nprmal mode but dosnt goes to the recovery mode pls help me... rply soon pls...
Please post cwm recovery and stock rom for my celkon a40.please I lost my stock recovery. Please help me.
Sent from my TA-FONE A37 HD using XDA Premium 4 mobile app
There is no official Recovery cmw or twrp are developed fr celkon A9+..
Please Help Me
Please any one help me to root my celkon millenium vogue Q445 mobile.
I tried many apps and softs to root but no result.
Once i tried with Mobogenie but it showed as Your Device is successfully ROOTED. As I checked with ROOT CHECKER app It showed me as "SORRY YOUR DEVICE IS NOT ROOTED PROPERLY".
So please help me to root my android Celkon Millenium Vogue mobile properly with SU Permissions.
please help me.pls....pls........plssss....................:crying:
Rooting for celkon A9+
abhisheka9 said:
hey same prob here..i am also trying to root my celkon a9+...i ve tried all methods...but all my efforts are vain..i think it is unrootable...:crying:
Click to expand...
Click to collapse
1.install VRoot software on your PC
2.connnect your celkon device to PC
3.VRoot software will detect your phone
4.after that select Root option in VRoot software...click on it.
5.your device will be rooted.....
try framaroot app to root
select barahir exploit in that and it wil restart saying android is upgrading in booting and u vil see supersu new app created after it started and its rooted
---------- Post added at 08:32 AM ---------- Previous post was at 08:28 AM ----------
down with vol down button and the vol up is select button vol up is also the back button when u r on the first line
Celkon Ringtone file
anilkumargaru said:
select barahir exploit in that and it wil restart saying android is upgrading in booting and u vil see supersu new app created after it started and its rooted
---------- Post added at 08:32 AM ---------- Previous post was at 08:28 AM ----------
down with vol down button and the vol up is select button vol up is also the back button when u r on the first line
Click to expand...
Click to collapse
Guys if you can help me wit the ringtone files of Celkon can any Of you share the default ringtone files of Celkon mobile Phone ??? Please!!!!
Hello,
I have micromax a110 mobile. I have rooted the device but does not have CWM installed. I tried to install it through terminal emulter,it was not succesfull, it booted toboriginal recovery present in mobile. Later I tried to install it through mobile uncle tools as suggested on xda website by one of the user. After that my phone not boting to recovery mode only. It reboots and then the screen gets turned off. I think original recovery is also gone. Can anyone pls help me to install CWM in my phone!!!.