I recently picked up a TF300TL off my local craigslist for $200.00. I've searched here as well as Google a lot and have not been able to come up with anything from someone who has installed Jellybean on a US TF300TL. Is there any custom rom that will work? How about root? I've found several threads but they all have warnings about it being untested on the TF300TL.
I'd just like to get Jellybean on here and am looking for some type of guide or walkthrough that could help me minimize the risk of bricking it, especially since it appears that the TF series has some specific steps that are required when updating.
Thanks!
krichek said:
I recently picked up a TF300TL off my local craigslist for $200.00. I've searched here as well as Google a lot and have not been able to come up with anything from someone who has installed Jellybean on a US TF300TL. Is there any custom rom that will work? How about root? I've found several threads but they all have warnings about it being untested on the TF300TL.
I'd just like to get Jellybean on here and am looking for some type of guide or walkthrough that could help me minimize the risk of bricking it, especially since it appears that the TF series has some specific steps that are required when updating.
Thanks!
Click to expand...
Click to collapse
https://www.asus.com/Tablets_Mobile/ASUS_Transformer_Pad_TF300TL/#support_Download_32
The manual that shows how to flash is there also.
Downloaded the toolkit from this thread: http://forum.xda-developers.com/showthread.php?t=2052779
I have the AT&T SGH-I317... unfortunately, the toolkit lists the Android version of my phone as 4.1.1, but my phone automatically downloaded and installed 4.1.2 the first time I used it the other day. My question is, do I need to wait for the toolkit to be updated with 4.1.2 for my specific phone, or alternatively, would it be safe to use the 4.1.1 version in the toolkit, or use one of the other ones listed as version 4.1.2.
I'm perfectly happy to wait if necessary. Don't want to take any chances of messing up my new phone. This will be my first rooting or unlocking of any kind. I'm an adept PC user but phones are new territory for me.
So, if someone knows how I should proceed, I'd be very grateful for the assistance. I'm asking this here because I'm a new member and can't yet post in the developer forums.
Thanks!
I haven't tried the toolkit since the latest update. I know the Sprint version has CF-Auto root. Check your thread for that one. It worked for me after the 4.1.2 update with no issues.
Edit: link http://forum.xda-developers.com/showthread.php?t=1980644
Sent from my SPH-L900 using xda app-developers app
Greetings....
Assembling a list of all RUU/firmware threads so that users no longer have to dig to find what's needed. Support for each will be found in the linked thread itself while general questions like "which one is applicable to my situation?" can be handled in this thread.
If you are S-ON
Your options are somewhat limited.. naturally.
RUU (4.4.2, 4.4.3, 4.4.4, 5.0.1, 6.0) in EXE/ZIP format
- http://forum.xda-developers.com/verizon-htc-one-m8/general/official-ruu1-55-605-2-t2883845
If you are S-OFF
RUU 6.0 zip thread
- http://forum.xda-developers.com/ver...pment/stock-m-firmware-nand-recovery-t3330972
RUU 5.0.1 (comes pre-rooted (EXE/zip support)
- http://forum.xda-developers.com/ver...zip-ruu-m8vzw-5-0-1-s-off-onlynewest-t3047103
RUU 4.4.4 (comes pre-rooted) (EXE/zip support)
- http://forum.xda-developers.com/ver...ent/ruu-m8vzw-4-4-4-s-off-onlynewest-t2914914
RUU 4.4.3 (comes pre-rooted) (zip support)
- http://forum.xda-developers.com/ver...ent/ruu-m8vzw-4-4-3-s-off-onlynewest-t2873144
RUU 4.4.2 (comes pre-rooted) (zip support)
- http://forum.xda-developers.com/showthread.php?t=2727831
Firmware only
4.4.3/4.4.4/5.0.1 Stock Recoveries, Stock kernels (boot), Stock ADSP, and many more....
- http://forum.xda-developers.com/showthread.php?t=2723159
4.4.2/4.4.3/4.4.4 Radios
- http://forum.xda-developers.com/verizon-htc-one-m8/development/radios-0-89-20-0222-t2824882
Note.... If you are needing to go back to locked and S-on for warranty purposes but are too leery to do it yourself, help is available via pm. Don't let your s/lock status from getting proper hardware RMA'S!
If you have bricked one beyond fixing and can't get it replaced, please consider donating it rather than throwing it in a desk drawer, shooting it, or whatever other crazy idea comes to mind. I can almost always put a bricked phone to good use.
Anyone who would like to use fastboot/adb for this device please use the following version fastboot/adb. It's HTC's own version. It works on pc's with less ram and it automatically breaks up a single zip into pieces for transfer. It also reflashes automatically if needed.
USE IT!
https://www.androidfilehost.com/?fid=95784891001612150
https://www.androidfilehost.com/?fid=95784891001612150
Looks good bro.
Great job!
Sweet! Thanks bro =]
Nice! I admit that the firmware was confusing for me on this phone, but thanks to dottat's posts, I figured it out.
This clears things up a lot and should help quite a few people.
Thanks!
xdadevnube said:
Nice! I admit that the firmware was confusing for me on this phone, but thanks to dottat's posts, I figured it out.
This clears things up a lot and should help quite a few people.
Thanks!
Click to expand...
Click to collapse
What was so confusing?
You are the MAN dottat!! Thanks!
Tigerstown said:
What was so confusing?
Click to expand...
Click to collapse
I managed to figure out the firmware largely due to dottat. There were multiple threads of various age, some with seemingly conflicting advice. This goes for most device forums I follow. There was no authoritative resource, IMO, until this thread.
The search feature was key, I am pretty thorough before embarking in firmware upgrades.
xdadevnube said:
I managed to figure out the firmware largely due to dottat. There were multiple threads of various age, some with seemingly conflicting advice. This goes for most device forums I follow. There was no authoritative resource, IMO, until this thread.
The search feature was key, I am pretty thorough before embarking in firmware upgrades.
Click to expand...
Click to collapse
@xdadevnube what could I do better in my OP of Vzw m8 firmware thread? I would like your input if you have ideas that would help make it easier for new comers to Xda? I would gladly make positive changes to my op to make it a easier an smoother experience. So feel free to tell me your ideas you/anyone might have that would help everyone..thanks I appreciate it.
Tigerstown said:
@xdadevnube what could I do better in my OP of Vzw m8 firmware thread? I would like your input if you have ideas that would help make it easier for new comers to Xda? I would gladly make positive changes to my op to make it a easier an smoother experience. So feel free to tell me your ideas you/anyone might have that would help everyone..thanks I appreciate it.
Click to expand...
Click to collapse
Your OP does contain the required information and instructions, so I can't really complain. One thing that could be helpful is to list the bootloader version info for each firmware release. You listed the most recent one right at the top of the thread, so at least it is easy to tell whether a given device is on the latest firmware or not. Because your thread is the main firmware thread, perhaps it would be best if the OP were organized into sections for 4.4.2, 4.4.3, and 4.4.4. It could be clarified which partitions are modified in the process, and whether the radios are affected. Install instructions could be put in their own spot.
These are only ideas! Also, your thread should probably be stickied. Thanks for all you do.
xdadevnube said:
Your OP does contain the required information and instructions, so I can't really complain. One thing that could be helpful is to list the bootloader version info for each firmware release. You listed the most recent one right at the top of the thread, so at least it is easy to tell whether a given device is on the latest firmware or not. Because your thread is the main firmware thread, perhaps it would be best if the OP were organized into sections for 4.4.2, 4.4.3, and 4.4.4. It could be clarified which partitions are modified in the process, and whether the radios are affected. Install instructions could be put in their own spot.
These are only ideas! Also, your thread should probably be stickied. Thanks for all you do.
Click to expand...
Click to collapse
hey whats up. I have made major changes to my firmware thread will you go check it out an let em know if i made it user friendly :highfive:
Firmware flash
Hello everyone. I am new to this Forum. I've only been here a few days. I have an Unlocked/S-Off Verizon HTC One M8 that I recently purchased from Ebay. I had a little trouble for a while when I first got it as it was running 4.4.2 and I took the OTA update to 4.4.3 and it messed up the phone. I didn't know it was Unlocked/S-Off'd. And the seller said it wasn't rooted any more. Well so now that I know it is even after running the Verizon RUU, I was wondering if I need to upgrade the firmware one upgrade at a time (meaning 4.4.3 and then 4.4.4)? Or can I jump to a 5.01 Lollipop ROM? I have TWRP installed and I used Flashify to install it. I'm hoping to use Flashify more for installing zips. Any help/suggestions would be greatly appreciated. Thank you....oh and I'm loving this M8!!!!
Tigerstown said:
hey whats up. I have made major changes to my firmware thread will you go check it out an let em know if i made it user friendly :highfive:
Click to expand...
Click to collapse
Looks good to me.
den_hart said:
Hello everyone. I am new to this Forum. I've only been here a few days. I have an Unlocked/S-Off Verizon HTC One M8 that I recently purchased from Ebay. I had a little trouble for a while when I first got it as it was running 4.4.2 and I took the OTA update to 4.4.3 and it messed up the phone. I didn't know it was Unlocked/S-Off'd. And the seller said it wasn't rooted any more. Well so now that I know it is even after running the Verizon RUU, I was wondering if I need to upgrade the firmware one upgrade at a time (meaning 4.4.3 and then 4.4.4)? Or can I jump to a 5.01 Lollipop ROM? I have TWRP installed and I used Flashify to install it. I'm hoping to use Flashify more for installing zips. Any help/suggestions would be greatly appreciated. Thank you....oh and I'm loving this M8!!!!
Click to expand...
Click to collapse
Rom and firmware are to separate things. You can flash straight to 4.4.4 firmware and then flash a lollipop Rom or any custom Rom.
Sent from my HTC6525LVW using Tapatalk
Firmware Updates
dottat said:
Rom and firmware are to separate things. You can flash straight to 4.4.4 firmware and then flash a lollipop Rom or any custom Rom.
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
Hello dottat. Thank you for replying to my question(s). Yes I know that a ROM is different than firmware. I was just wondering if I had to upgrade my firmware one update at a time or if I could just jump from 4.4.2 to say 5.0 or 5.01 so that if I wanted to I could put a custom ROM on my M8. I'm not actually sure how high the firmware upgrades go. I've only seen 4.4.4 as the highest so far.
den_hart said:
Hello dottat. Thank you for replying to my question(s). Yes I know that a ROM is different than firmware. I was just wondering if I had to upgrade my firmware one update at a time or if I could just jump from 4.4.2 to say 5.0 or 5.01 so that if I wanted to I could put a custom ROM on my M8. I'm not actually sure how high the firmware upgrades go. I've only seen 4.4.4 as the highest so far.
Click to expand...
Click to collapse
You can go straight to 4.4.4 and get crack flashing. No L firmware yet as we don't have L official.
Sent from my HTC6525LVW using Tapatalk
update process on factory unlocked VZW M8 used with GSM
Hi!
I am getting a verizon factory unlocked model and i am going to use it on a GSM network in india.Since its factory unlocked there should be no issues with the network. .however i had some doubts about the software updates. .so will i be able to receive and install updates normally without resorting to rooting the phone. .some people reported that they had an issue installing the update where it said that they have to be on CDMA or something like that. .Will i be able to overcome such issues by connecting to wifi?Is someone could shed a little light on how the update process works when used abroad with a GSM carrier it would be great!Thank you so much in advance!
balag59 said:
Hi!
I am getting a verizon factory unlocked model and i am going to use it on a GSM network in india.Since its factory unlocked there should be no issues with the network. .however i had some doubts about the software updates. .so will i be able to receive and install updates normally without resorting to rooting the phone. .some people reported that they had an issue installing the update where it said that they have to be on CDMA or something like that. .Will i be able to overcome such issues by connecting to wifi?Is someone could shed a little light on how the update process works when used abroad with a GSM carrier it would be great!Thank you so much in advance!
Click to expand...
Click to collapse
You will always be able to install the s-on ruu from here. The problem is that the latter versions of software while sim unlocked have proven very difficult to use on some carriers because you can no longer edit apn. You have to chose from pre-provided apn and thats only if they show up with your SIM card inserted.
You would be really wise to s-off the phone even if you don't root it as this would be the only way to downgrade if you ended up not having a workable situation on the newer software.
Hi there xda people,
Since all you cool people seem to be doing amazing things with your Galaxy phones, I bet this is an easy question for you.
Quick question: Since I have upgraded my SCH-I535 to Android 4.4.2 am I good to use heimdall to flash (if that is even the right word) ClockworkMod recovery on there. And then use ClockworkMod recovery to install CyanogenMod?
Ok here are the details:
I am trying to put CyanogenMod on my Samsung Galaxy SIII (Verizon) Model SCH-I535. Never done this before but I am not afraid of the command line and I am running Ubuntu on my desktop.
I have been diligently reading through the instructions on the CyanogenMod site because I cannot afford to brick my phone and I am a little confused. Please set me straight.
A few versions back CM unified all Galaxy S III variants into one (d2lte). Instructions for 2dlte say
"Warning: The d2vzw variant cannot follow these installation instructions. For this variant, reference the device-specific installation instructions"
But when I go to the instructions for d2vzw it says:
"you must be a 4.2.2 or older build or this will not work"
According to the specs in "About Phone" I am on 4.4.2
So do you all use heimdall to put a custom recovery on the SCH-I535? If so will ClockworkMod do the trick?
If so what variant of CyanogenMod do I install? d2vzw or d2lte?
And finally, which version number of CM should I use to make sure all the bells and whistles work? CM10, CM11?
There is a similar question to this one on the CyanogenMod forums and no one has answered it.
Thanks to anyone that can give me some reliable advice!
ijustwannanewphone said:
Hi there xda people,
Since all you cool people seem to be doing amazing things with your Galaxy phones, I bet this is an easy question for you.
Quick question: Since I have upgraded my SCH-I535 to Android 4.4.2 am I good to use heimdall to flash (if that is even the right word) ClockworkMod recovery on there. And then use ClockworkMod recovery to install CyanogenMod?
Ok here are the details:
I am trying to put CyanogenMod on my Samsung Galaxy SIII (Verizon) Model SCH-I535. Never done this before but I am not afraid of the command line and I am running Ubuntu on my desktop.
I have been diligently reading through the instructions on the CyanogenMod site because I cannot afford to brick my phone and I am a little confused. Please set me straight.
A few versions back CM unified all Galaxy S III variants into one (d2lte). Instructions for 2dlte say
"Warning: The d2vzw variant cannot follow these installation instructions. For this variant, reference the device-specific installation instructions"
But when I go to the instructions for d2vzw it says:
"you must be a 4.2.2 or older build or this will not work"
According to the specs in "About Phone" I am on 4.4.2
So do you all use heimdall to put a custom recovery on the SCH-I535? If so will ClockworkMod do the trick?
If so what variant of CyanogenMod do I install? d2vzw or d2lte?
And finally, which version number of CM should I use to make sure all the bells and whistles work? CM10, CM11?
There is a similar question to this one on the CyanogenMod forums and no one has answered it.
Thanks to anyone that can give me some reliable advice!
Click to expand...
Click to collapse
Your on a locked bootloader. You cannot run any custom roms. Reverting back to a previous version of Android is no longer an option. The only choice or even chance you have at this point is installing safestrap and running one of the few locked bootloader roms that are available
Sent from my Cataclysm Nexus 5
Thanks!
Hey thanks for the heads up! I would have totally bricked my phone. As I have been searching more I pieced together the fact that for the SCH-i535 if you took the android 4.3 update you got the locked boot loader. Ah well, I guess I will have to spring for a phone that isn't so locked down.
ijustwannanewphone said:
Hey thanks for the heads up! I would have totally bricked my phone. As I have been searching more I pieced together the fact that for the SCH-i535 if you took the android 4.3 update you got the locked boot loader. Ah well, I guess I will have to spring for a phone that isn't so locked down.
Click to expand...
Click to collapse
Keep your eye on Craigslist for an S3 that isn't locked down. Or stick with what you have and pop on Superlite. It's stock, but at least it's debloated. Good luck!
I have a Verizon S3 unlocked, no root, totally stock android 4.4.2 with baseband yudne1 and build kot49h.i535vrudne1
Want to confirm if I can install CM13 nightly. Everything I read indicates I need to root and update recovery and all that good stuff but it is not possible on 4.4.2
Just want to confirm if anything has changed in the past year with a new process. Forums have a lot of old guides so I would appreciate a quick yes or no. if yes, any link to a stable procedure would really be appreciated.
Thank you in advance. XDA is awesome and the people on this forum are some of the best.
Thanks,
ARiK
arikinthecity said:
I have a Verizon S3 unlocked, no root, totally stock android 4.4.2 with baseband yudne1 and build kot49h.i535vrudne1
Want to confirm if I can install CM13 nightly. Everything I read indicates I need to root and update recovery and all that good stuff but it is not possible on 4.4.2
Just want to confirm if anything has changed in the past year with a new process. Forums have a lot of old guides so I would appreciate a quick yes or no. if yes, any link to a stable procedure would really be appreciated.
Thank you in advance. XDA is awesome and the people on this forum are some of the best.
Thanks,
ARiK
Click to expand...
Click to collapse
No it currently cannot run CM13 or any version of CM. Only via safestrap with the 3 options stock, Paul pizz and Superlite
Sent from my Nexus 6
arikinthecity said:
I have a Verizon S3 unlocked, no root, totally stock android 4.4.2 with baseband yudne1 and build kot49h.i535vrudne1
Want to confirm if I can install CM13 nightly. Everything I read indicates I need to root and update recovery and all that good stuff but it is not possible on 4.4.2
Just want to confirm if anything has changed in the past year with a new process. Forums have a lot of old guides so I would appreciate a quick yes or no. if yes, any link to a stable procedure would really be appreciated.
Thank you in advance. XDA is awesome and the people on this forum are some of the best.
Thanks,
ARiK
Click to expand...
Click to collapse
Hey!
As @ShapesBlue says, if you took the OTA to 4.2.2 then you are locked. HOWEVER, there is a method developed by the typical enterprising XDA member that "Downgrades" the firmware by flashing part of the boot loader/firmware but leaves the crucial bit intact that doesn't brick the phone. Sort of a hybrid firmware flash. I believe it's supposed to open the phone up to flashing TWRP and non-stock custom ROMs. I know someone who used it and it worked on CM12.1 last year, but he also had some trouble after awhile (don't know if that was related to this procedure or not) and made an error later that bricked his phone, permanently it seems.
What isn't mentioned in that OP, at least the last time I looked, was that after doing this procedure, if you flash the firmware recommended in the CM12 and CM13 thread OP's, you will overwrite the partition that is spared in his zip file. Then you will be dead! He does explain exactly what partitions are flashed by telling you how to make the zip file. The updater-script I expect is not touched. Looking at it or in the other files you'll need to do this process will show you what's written where, but they have the partitions names. You can go into the CM12.1 thread OP on XDA for our phone and by clicking on the "d2vzw ROM Extras" link you can find all kinds of stuff, plus a few different partition tables that tell you how your phone is setup. There is other info in the OP itself about this and other topics related to flashing CM as well. (I'm the OP )
WARNING! Don't go into this haphazardly though. I would read through that thread thoroughly and see what if any success people are reporting, and ask questions. You don't want to ruin your phone!
It's in the "Android Development" forum in the root forum for our phone.
Report back on what you end up doing.:good: