Hi all, I've mistakenly installed CM10.1 P3100 on my P3110, so I tried to flash the original 4.1.2 version using ODIN P3110. All went well, but when it starts,it stays in the samsung logo. Does anyone know how I can fix it?
Excuse me for my bad English
keeper94 said:
Hi all, I've mistakenly installed CM10.1 P3100 on my P3110, so I tried to flash the original 4.1.2 version using ODIN P3110. All went well, but when it starts,it stays in the samsung logo. Does anyone know how I can fix it?
Excuse me for my bad English
Click to expand...
Click to collapse
have you tried a wipe data/factory reset? can you get in to recovery or download mode?
[EDIT] When i have boot loop i always flash back to ICS 4.0.4 and never had a problem with boot loop after (not saying this will be the same for you)
---------- Post added at 12:01 PM ---------- Previous post was at 11:55 AM ----------
also check here for guides on just about everything
http://forum.xda-developers.com/showthread.php?t=1722745
squ89r97 said:
have you tried a wipe data/factory reset? can you get in to recovery or download mode?
[EDIT] When i have boot loop i always flash back to ICS 4.0.4 and never had a problem with boot loop after (not saying this will be the same for you)
---------- Post added at 12:01 PM ---------- Previous post was at 11:55 AM ----------
also check here for guides on just about everything
http://forum.xda-developers.com/showthread.php?t=1722745
Click to expand...
Click to collapse
I've flash recovery and later I flashed CM10.1. Now my galaxy tab works ok. Thx for your help!
Enviado desde mi Galaxy Nexus usando Tapatalk 2
Related
My Galaxy s+ is in trouble. I flashed CM10.1 on it, wich worked fine, but then i wanted to flash the gapps, and now i'm stuck in cmw bootloop. I can't select anything in cmw, so the only thing i can do is get it into download mode. My pc does see the phone, but the problem is, odin doesnt.
Pleas help me guys...
Wolfkie40 said:
My Galaxy s+ is in trouble. I flashed CM10.1 on it, wich worked fine, but then i wanted to flash the gapps, and now i'm stuck in cmw bootloop. I can't select anything in cmw, so the only thing i can do is get it into download mode. My pc does see the phone, but the problem is, odin doesnt.
Pleas help me guys...
Click to expand...
Click to collapse
Have u tried different versions of ODIN? I had same problem and that help for me.
---------- Post added at 02:08 PM ---------- Previous post was at 02:02 PM ----------
ODIN Multi Downloader v4.43
That worked for me.
Installed CWM 6.0.1.0 and rooted this device then installed a 10.1 nightly, wiped dalvik and all but now device boots straight into recovery after samsung 10.1 logo.. I've already tried flashing back to the stock rom using Odin, flash went fine but now it just boots into stock recovery instead of CWM.. also a bit of weirdness to it.. when i click on reboot system it just turns the device off instead of "rebooting", i've tried wiping everything and nothing seems to work.. was for sure the stock rom from sammobile would do the trick but nope ... any suggestions? Thanks.
Perhaps flashing v6.0.3.3 might work. :beer:
http://forum.xda-developers.com/showthread.php?p=41159669
dynospectrum said:
Perhaps flashing v6.0.3.3 might work. :beer:
http://forum.xda-developers.com/showthread.php?p=41159669
Click to expand...
Click to collapse
Thanks for the help but this didn't work either flashed with odin just keeps going to recovery when booted ...
Neoborn1 said:
Thanks for the help but this didn't work either flashed with odin just keeps going to recovery when booted ...
Click to expand...
Click to collapse
Did you ever figure this out?
I have a 5113 doing the exact same thing. I posted a thread on here but i dont think anyone has an answer.
---------- Post added at 07:59 PM ---------- Previous post was at 07:46 PM ----------
http://forum.xda-developers.com/showthread.php?t=2404899
Above is the thread that details what is happening with mine. Sounds like the same issue to me.
Dear All,
I Update my Tab2 GT-P5100 from 4.1.2 of Hongkong to France 4.2.2 threw Odin(Stock ROM), before & after update I factory reset & Clear Catch partition, but after update when I try to Clear Catch partition it shows ERROR:crying:,I try to Factory reset & clear catch 3 to 4 times but everytime it shows as ERROR. one more problem is now CSC showing KOR:crying:,Kies not recognizing my Tab2.
Please Help me,Thanks in Advance.
No One face this problem? No one has any Idea?
Here's a post maybe helpful, but it's in chinese..it mentions that flash the france 4.2.2 need a boot file.
impliu said:
Here's a post maybe helpful, but it's in chinese..it mentions that flash the france 4.2.2 need a boot file.
Click to expand...
Click to collapse
Thanks but I can't see any link,also any one has link in english to Download boot file?
sorry,i forgot paste the link, here's it:
http://b.it168.com/thread-4690107-1-1.html
but in the post boot file is for p3100.
---------- Post added at 06:13 AM ---------- Previous post was at 05:38 AM ----------
whatever, i can give you the p3100 bootloader file link:
http://pan.baidu.com/share/link?shareid=2816708196&uk=2449589090
but you should use it as your own risk.
BTW, it seems that you need odin3 3.07 to flash the rom:
http://pan.baidu.com/share/link?shareid=2832782058&uk=2449589090
impliu said:
sorry,i forgot paste the link, here's it:
http://b.it168.com/thread-4690107-1-1.html
but in the post boot file is for p3100.
---------- Post added at 06:13 AM ---------- Previous post was at 05:38 AM ----------
whatever, i can give you the p3100 bootloader file link:
http://pan.baidu.com/share/link?shareid=2816708196&uk=2449589090
but you should use it as your own risk.
BTW, it seems that you need odin3 3.07 to flash the rom.
Click to expand...
Click to collapse
Thanks Lot
found this page:
http://samsung-updates.com/details/....1_3G_plus_WiFi/GT-P5100/XEF/P5100XXDMH1.html
the "Stock Firmware" is the france 4.2.2 rom.
the "Kernel File(Odin flashable)" should be the boot file you need.
i can't download them in china, you could download them and flash as your own risk.
impliu said:
found this page:
http://samsung-updates.com/details/....1_3G_plus_WiFi/GT-P5100/XEF/P5100XXDMH1.html
the "Stock Firmware" is the france 4.2.2 rom.
the "Kernel File(Odin flashable)" should be the boot file you need.
i can't download them in china, you could download them and flash as your own risk.
Click to expand...
Click to collapse
Thanks a lot, I appreciate your afford to HELP me, I am confident this kernel file will solve my problem,Once again Thank you very much.
So basically, my device was rooted perfectly fine, i then flashed twrp and ever since my galaxy s6 (SM-6920F) only loads the samsung/galaxy s6 logo, which is the first screen, it will stay on there until the phone has died. I can boot into download mode, i have tried numerous way to fix such as the stock firmware, whenever try that i odin it fails, tried lots of methods to solve this but nothing seems to work and i just dont know what to do now
kuky6789 said:
So basically, my device was rooted perfectly fine, i then flashed twrp and ever since my galaxy s6 (SM-6920F) only loads the samsung/galaxy s6 logo, which is the first screen, it will stay on there until the phone has died. I can boot into download mode, i have tried numerous way to fix such as the stock firmware, whenever try that i odin it fails, tried lots of methods to solve this but nothing seems to work and i just dont know what to do now
Click to expand...
Click to collapse
You probably flashed the wrong TWRP.
---------- Post added at 08:27 AM ---------- Previous post was at 08:26 AM ----------
Try booting into recovery
so u can not go in download mode?
asadnow2k said:
so u can not go in download mode?
Click to expand...
Click to collapse
I can get into download mode yes, but not into recovery?
yasteellutch said:
You probably flashed the wrong TWRP.
---------- Post added at 08:27 AM ---------- Previous post was at 08:26 AM ----------
Try booting into recovery
Click to expand...
Click to collapse
Can only boot to download no recovery, if i did use the wrong twrp would retrying with perhaps the correct version fix the problem?
kuky6789 said:
Can only boot to download no recovery, if i did use the wrong twrp would retrying with perhaps the correct version fix the problem?
Click to expand...
Click to collapse
It's possible. If you can get into recovery then you can install a custom ROM then your boot problem is solved
yasteellutch said:
It's possible. If you can get into recovery then you can install a custom ROM then your boot problem is solved
Click to expand...
Click to collapse
Finally I went onto the twrp page got the new and correct version for my phone then as the flash was finished managed to power in to recovery, kept all my data, thankyou
kuky6789 said:
I can get into download mode yes, but not into recovery?
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=24459283995310257
flash with this firmware and post results.
kuky6789 said:
Finally I went onto the twrp page got the new and correct version for my phone then as the flash was finished managed to power in to recovery, kept all my data, thankyou
Click to expand...
Click to collapse
Np
---------- Post added at 10:29 AM ---------- Previous post was at 10:28 AM ----------
yasteellutch said:
Np
Click to expand...
Click to collapse
Be careful next time
Hello everyone!
So my friend tried to downgrade his phone from 9.0, to 8.0 and he messed up somewhere so now he's stuck with bricked phone. I think it is soft bricked because i can boot to recovery and to bootloader. I tried to reflash his phone with odin, but i end up with an error something in the lines of write operation failed. Also tried like 3 or 4 diffrent stock roms, nothing worked out.
What i know about the phone:
* Its samsung A8 (SM-A530f/DS)
* OEM lock is still on.
* Debug mode is off (the one in android settings)
* Recovery is still stock (tried to flash TWRP got the same error)
* ADB and fastboot does not pick up the device
* I can boot to the recovery and bootloader (Download mode)
Thank you guys in advance!
Exs7asy said:
Hello everyone!
So my friend tried to downgrade his phone from 9.0, to 8.0 and he messed up somewhere so now he's stuck with bricked phone. I think it is soft bricked because i can boot to recovery and to bootloader. I tried to reflash his phone with odin, but i end up with an error something in the lines of write operation failed. Also tried like 3 or 4 diffrent stock roms, nothing worked out.
What i know about the phone:
* Its samsung A8 (SM-A530f/DS)
* OEM lock is still on.
* Debug mode is off (the one in android settings)
* Recovery is still stock (tried to flash TWRP got the same error)
* ADB and fastboot does not pick up the device
* I can boot to the recovery and bootloader (Download mode)
Thank you guys in advance!
Click to expand...
Click to collapse
So you tried to down grade to 8 with Odin?
What what exactly did you try to flash?
I didnt try to flash it, my friend did that, and i took his phone to fix it. So i dont know what he did, he asked me to fix it and thats what i know. As he said to me he used odin to flash an older stock rom, and he messed up somewhere so the phone is bricked now.
Exs7asy said:
I didnt try to flash it, my friend did that, and i took his phone to fix it. So i dont know what he did, he asked me to fix it and thats what i know. As he said to me he used odin to flash an older stock rom, and he messed up somewhere so the phone is bricked now.
Click to expand...
Click to collapse
Did try a factory reset?
mchlbenner said:
Did try a factory reset?
Click to expand...
Click to collapse
Tried that too, it had no effect, still bricked. In recovery i get some errors. One is "dm-verity verification failed...", and another one "E:[libs_mgr]is_dt_compatible(): firmware info was not valid: '/proc/device-tree/firmware/android/compatible': no such file or directory.
must be FRP lock it happen to me in J7
---------- Post added at 08:56 AM ---------- Previous post was at 08:51 AM ----------
need to download this first and flash
https://combinationfirmware.com/downloads/a530fxxu4asb1/
---------- Post added at 08:56 AM ---------- Previous post was at 08:56 AM ----------
after he need to wipe data cache from recovery
---------- Post added at 08:58 AM ---------- Previous post was at 08:56 AM ----------
and download latest firmware from UPDATO Pie because oreo can have problem and you have 4 files you only need to flash BL, AP and CSC.
Lu Han said:
must be FRP lock it happen to me in J7
---------- Post added at 08:56 AM ---------- Previous post was at 08:51 AM ----------
need to download this first and flash
https://combinationfirmware.com/downloads/a530fxxu4asb1/
---------- Post added at 08:56 AM ---------- Previous post was at 08:56 AM ----------
after he need to wipe data cache from recovery
---------- Post added at 08:58 AM ---------- Previous post was at 08:56 AM ----------
and download latest firmware from UPDATO Pie because oreo can have problem and you have 4 files you only need to flash BL, AP and CSC.
Click to expand...
Click to collapse
I will try that out and report back soon. Thank you.
UPDATE! Everything worked out. Thank you very much!
Exs7asy said:
I will try that out and report back soon. Thank you.
UPDATE! Everything worked out. Thank you very much!
Click to expand...
Click to collapse
plz i have the same probleme can you tell me the steps you did