When installing my selected ROM, I get this message:
Finding update package...
opening update package...
E: Can't open /sdcard/egb_jb_alpha1.zip
(bad)
Installation aborted
This just refers to a bad copy of the file, either by a bad download or it wasn't repackaged correctly. Try another download or extract and re-zip on your PC.
Sent from my LG-P999 using xda app-developers app
Related
Im trying to get VI3.5 installed - currently running v3 and loving it.
I boot into clockwork recovery, install zip form sd card, choose zip from sd card, pick the zip file ... and see the following:
-- Installing: /sdcard/vi35.zip
Finding update package...
Opening update package...
E:Can't open /sdcard/i35.zip
(bad)
Installation aborted.
I would really like to experience the update. Any suggestions as to what I am doing wrong?
thefeeny said:
Im trying to get VI3.5 installed - currently running v3 and loving it.
I boot into clockwork recovery, install zip form sd card, choose zip from sd card, pick the zip file ... and see the following:
-- Installing: /sdcard/vi35.zip
Finding update package...
Opening update package...
E:Can't open /sdcard/i35.zip
(bad)
Installation aborted.
I would really like to experience the update. Any suggestions as to what I am doing wrong?
Click to expand...
Click to collapse
re-download the rom...you got a bad download
Wow. speedy response.
I should have mentioned - I have downloaded it twice and checked the md5, which matches... is there someplace else I should be getting it from (besides the link in the virtuous thread itself) ?
thefeeny said:
Wow. speedy response.
I should have mentioned - I have downloaded it twice and checked the md5, which matches... is there someplace else I should be getting it from (besides the link in the virtuous thread itself) ?
Click to expand...
Click to collapse
that's strange...try formatting your sd-card and flash again
thefeeny said:
Wow. speedy response.
I should have mentioned - I have downloaded it twice and checked the md5, which matches... is there someplace else I should be getting it from (besides the link in the virtuous thread itself) ?
Click to expand...
Click to collapse
Did you check the MD5 of the zip on the phone or just the PC ?
Edit: as a side note which 3.0 version are you coming from ? If it's earlier than 3.1.0b6 you'll need to superwipe.
I did not check md5 of file on pc, shall try and if that fails, recopy... Ty again etc beforevformat sdcard and trying yet again.
I figured I'd need to super wipe, but as another aside, the virtuous documentation quite clearly (and incorrectly) says no wipe needed for releases with the same major number.
Thx goi-n-dal - the md5 of the copied file was indeed out. Recopied it from osx terminal and md5 checked out ... FWIW copying this file in osx itself (non terminal) would not give me a corret md5 - only when I copied it through shell did it work....
Anyway, then superwipe and flash. Away!
Now that its flashed.. im noticing slow slow gps lock... hmm
Im trying to update the modem from EP4D to FP1H using CWM, but when I start the installation, it gives me the error
file_getprop: failed to stat "/system/build.prop": No such file or directory
E:Error in /sdcard/668fc9f366e2.update_SCH-I510_EP4D_to_FP1H (1).zip
(Status 7)
Installation aborted
does anyone know how to fix this? I've tried re-downloading the update file, but nothing I've tried has worked.
Just thought of something. Do I need to convert back to the stock file system in CWM before I can install the update? I'm on EXT4 right now.
savan12986 said:
Im trying to update the modem from EP4D to FP1H using CWM, but when I start the installation, it gives me the error
file_getprop: failed to stat "/system/build.prop": No such file or directory
E:Error in /sdcard/668fc9f366e2.update_SCH-I510_EP4D_to_FP1H (1).zip
(Status 7)
Installation aborted
does anyone know how to fix this? I've tried re-downloading the update file, but nothing I've tried has worked.
Click to expand...
Click to collapse
You must rename the update file to just "update. Zip" but make sure you are stock ep4d before updating.
Sent from my SCH-I510 using xda premium
You can't be on anything custom when attempting to flash that package.
ok, thanks. I used your stock conversion pit file & rom Imnuts to get back, then I just took all the OTA updates to get to the FP1 modem
i need help with modifying / creating the updater script in the meta-inf folder of a custom rom.
the reason for this is that, i just added ota updates to my rom, and everytime i push an update to my device (test), it gives me the following error when installing in cwm:
E:/ failed to load keys
/res/keys No such file or directory.
thats happens when the app tries to do it automatically. then i try it manually by toggling the signature verification in cwm.
and my guess was pretty much that it had something to do with the updater script.
so guys, please help me out and fast!
thankyou!
Maybe someone can help Installing update...
Check : blob size = 13573093
Verifying current system...
file "/system/app/FacebookPoster.apk" doesn't have any of expected sha1 sums; checking cache
failed to stat "/cache/saved.file": No such file or directory
failed to load cache file
script aborted: assert failed: apply_patch_check("/system/app/FacebookPoster.apk", "6797ea126851259f84e57a996f963cc0e5b528c9", "fc2f35556b02acc08fb91cbeb58797b5a4157c4c")
assert failed: apply_patch_check("/system/app/FacebookPoster.apk", "6797ea126851259f84e57a996f963cc0e5b528c9", "fc2f35556b02acc08fb91cbeb58797b5a4157c4c")
E:Error in /cache/dlpkgfile
(Status 7)
Installation aborted.
I:result_code: 410
Check and format /storage to vfat if needed...
Done
Tried installing apk but it fails.:crying:
ShTePants said:
file "/system/app/FacebookPoster.apk" doesn't have any of expected sha1 sums; checking cache
failed to stat "/cache/saved.file": No such file or directory
failed to load cache file
script aborted: assert failed: apply_patch_check("/system/app/FacebookPoster.apk", "6797ea126851259f84e57a996f963cc0e5b528c9", "fc2f35556b02acc08fb91cbeb58797b5a4157c4c")
Click to expand...
Click to collapse
You are trying to install an US dlpkgfile, and you seem to be on 10.4.4.18 currently. But I still need more details. Rooted? Unlocked? Did you ever modify/delete any files on /system before the upgrade? Did any previous attempt to upgrade fail?
_that said:
You are trying to install an US dlpkgfile, and you seem to be on 10.4.4.18 currently. But I still need more details. Rooted? Unlocked? Did you ever modify/delete any files on /system before the upgrade? Did any previous attempt to upgrade fail?
Click to expand...
Click to collapse
It is rooted , still locked and yes i uninstalled the facebook poster app with Titanium. No other upgrade failed
ShTePants said:
It is rooted , still locked and yes i uninstalled the facebook poster app with Titanium. No other upgrade failed
Click to expand...
Click to collapse
OK, then this is apparently the first update that tries to patch FacebookPoster.apk and .odex, so these files need to be there. Restore the original app from your backup (you did make a backup before deleting, didn't you?) and then the upgrade should work.
If you don't have a backup, you call still extract the app from a full firmware image if you have Linux on your PC (unzip, unzip, blobunpack, loop mount the ext4 filesystem from blob.APP, extract the required file), or you can ask someone else to extract it from their rooted stock tablet.
_that said:
OK, then this is apparently the first update that tries to patch FacebookPoster.apk and .odex, so these files need to be there. Restore the original app from your backup (you did make a backup before deleting, didn't you?) and then the upgrade should work.
If you don't have a backup, you call still extract the app from a full firmware image if you have Linux on your PC (unzip, unzip, blobunpack, loop mount the ext4 filesystem from blob.APP, extract the required file), or you can ask someone else to extract it from their rooted stock tablet.
Click to expand...
Click to collapse
Ty for the help will give it a shot and no backup for that app
ShTePants said:
Ty for the help will give it a shot and no backup for that app
Click to expand...
Click to collapse
Instead of waiting around, do a factory reset then start over again, but keep updating until the end and don't install any user apps in between. Only install user apps once the upgrade is finished.
Flash Asus full .30 version, root, ota rootkeeper to save root, upgrade, restore root.
Really wanna get the R38 update but in TWRP I get something about it being unable execute updater script
Sent from my A0001 using XDA Free mobile app
Be more specific and provide more information, you can't expect anyone to be able to help if that's all the information you're giving.
Transmitted via Bacon
My apologies friend
Installing '/sdcard/Download/cm-bacon-3628510d76-to-ac1ccf7921-signed.zip'... Checking for MD5 file... Skipping MD5 check: no MD5 file found I:Zip contains SELinux file_contexts file in its root. Extracting to /file_contexts I:Legacy property environment initialized. mount: failed to mount /dev/block/platform/msm_sdcc.1/by-name/userdata at /data: Device or resource busy about to run program [/tmp/otasigcheck.sh] with 1 args failed to stat "/system/priv-app/Mms.odex": No such file or directory script aborted: assert failed: apply_patch_check("/system/priv-app/Mms.odex","d77ac20575a697c84bbe9e63a93519fd75fa1187","0f648477b10cb1c412305b6f2b9b413c9836e4a6") assert failed: apply_patch_check("/system/priv-app/Mms.odex","d77ac20575a697c84bbe9e63a93519fd75fa1187","0f648477b10cb1c412305b6f2b9b413c9836e4a6") I:Legacy property environment disabled. E:Error executing updater binary in zip '/sdcard/Download/cm-bacon-3628510d76-to-ac1ccf7921-signed.zip' Error flashing zip '/sdcard/Download/cm-bacon-3628510d76-to-ac1ccf7921-signed.zip' Updating partition details...
Here's what I got from my log.
Sent from my A0001 using XDA Free mobile app
I assume the problem is here
E:Error executing updater binary in zip '/sdcard/Download/cm-bacon-3628510d76-to-ac1ccf7921-signed.zip' Error flashing zip '/sdcard/Download/cm-bacon-3628510d76-to-ac1ccf7921-signed.zip' Updating partition details...
From what I can see there, you've modified or uninstalled the stock messaging app, is that right?
Transmitted via Bacon
You're correct. I actually recently purchased my oneplus used and I noticed the stock messaging app wasn't in the stock ROM. How can I go about fixing this?
Sent from my A0001 using XDA Free mobile app
Getxrealx said:
You're correct. I actually recently purchased my oneplus used and I noticed the stock messaging app wasn't in the stock ROM. How can I go about fixing this?
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
Are you actually on CM11S at the moment?
Transmitted via Bacon
Yes currently on 33R
Sent from my A0001 using XDA Free mobile app
install a complete rom from here http://forum.xda-developers.com/oneplus-one/general/cm11s-official-untouched-image-t2857110 because you never know what else has been done
Yep, do that, full wipe (system/data/cache/dalvik cache) required.
Transmitted via Bacon
Really appreciate it guys! So I should download the 33R full ROM correct?
Sent from my A0001 using XDA Free mobile app
Getxrealx said:
Really appreciate it guys! So I should download the 33R full ROM correct?
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
Yep, get the recovery flashable version.
Transmitted via Bacon
Awesome, I'm good to go. Thanks a ton! :thumbup:
Sent from my A0001 using XDA Free mobile app
timmaaa said:
Yep, get the recovery flashable version.
Transmitted via Bacon
Click to expand...
Click to collapse
Actually. Same problem. Won't flash. Did a complete wipe
Sent from my A0001 using XDA Free mobile app
Getxrealx said:
Actually. Same problem. Won't flash. Did a complete wipe
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
Exactly what error are you getting? You wiped system, data, cache, and dalvik cache?
Transmitted via Bacon
timmaaa said:
Exactly what error are you getting? You wiped system, data, cache, and dalvik cache?
Transmitted via Bacon
Click to expand...
Click to collapse
Formatted exactly like that. One sec. Let me replicate the error in a log
Sent from my A0001 using XDA Free mobile app
Getxrealx said:
Formatted exactly like that. One sec. Let me replicate the error in a log
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
Are you sure your OTA file is ok? What's the md5?
Transmitted via Bacon
timmaaa said:
Are you sure your OTA file is ok? What's the md5?
Transmitted via Bacon
Click to expand...
Click to collapse
Here's what I got
E:Error executing updater binary in zip '/sdcard/Download/cm-11.0-XNPH33R-bacon-signed.zip'
Error flashing zip '/sdcard/Download/cm-11.0-XNPH33R-bacon-signed.zip'
I downloaded the flashable zip from the link
timmaaa said:
Are you sure your OTA file is ok? What's the md5?
Transmitted via Bacon
Click to expand...
Click to collapse
Actually it failed to create apks too...
mount: failed to mount /dev/block/platform/msm_sdcc.1/by-name/system at /system: Device or resource busy
minzip: Can't create target file "/system/etc/install-cm-recovery.sh": Read-only file system
minzip: Extracted 0 file(s)
minzip: Can't create target file "/system/app/BasicDreams.apk": Read-only file system
minzip: Extracted 0 file(s)
symlink: failed to symlink /system/bin/dump.f2fs to ../bin/fsck.f2fs: Read-only file system
script aborted: symlink: some symlinks failed
symlink: some symlinks failed
I:Legacy property environment disabled.
E:Error executing updater binary in zip '/sdcard/Download/cm-11.0-XNPH33R-bacon-signed.zip'
Error flashing zip '/sdcard/Download/cm-11.0-XNPH33R-bacon-signed.zip'
Updating partition details...
What version of TWRP are you using?
Transmitted via Bacon