Database Info

Tablet fits in dock without removing case ?

Hi
I have the very nice Samsung book case and was thinking of getting a dock. Anyone know if the table will fit in a dock (Samsung or otherwise) without needing to be removed from the case ?
Thanks

What features are you looking for in your dock? If you just looking for something that'll hold your tablet at a good viewing angle while charging, you could 3D print (or commission someone to 3D print) this dock.
It works well, with and without my case. (There's two versions of the dock: standard and jumbo. I've tried both. I personally prefer the standard.)

colbymulkey said:
What features are you looking for in your dock? If you just looking for something that'll hold your tablet at a good viewing angle while charging, you could 3D print (or commission someone to 3D print) this dock.
It works well, with and without my neoprene case. (There's two versions of the dock: standard and jumbo. I've tried both. I personally prefer the standard.)
Click to expand...
Click to collapse
Hot much does it cost to get this printed? And does it hold the charging cable in place where all you have to do is slip the tablet into the dock and it connects?

nice answer! thanks, that would probably work. I'll look in how much it would cost to print.
This image - image:103984- suggests that the charger gets held in place by the 2 halves. I doubt its as a snug as a purpose built dock but it looks good enough

shaxs said:
Hot much does it cost to get this printed? And does it hold the charging cable in place where all you have to do is slip the tablet into the dock and it connects?
Click to expand...
Click to collapse
Printing cost would depend on who you commissioned to print the dock. If you found someone local and could avoid shipping costs, it could be done very, very cheaply. (The dock I'm using is actually an early prototype from the same guy that wrote the Thingiverse post I linked to, so I lucked out and got mine for free.)
It holds the charging cable firmly in place; requires very little effort to dock, outside of making sure the tablet's centered as you lower it. It seems to be a little sturdier when docked in its case, but its still perfectly acceptable sans-case too.
I leave a dedicated OEM charging cable in my dock. In the prototype I got, the cable had to be kinked at an extreme angle to keep the connection point firmly in place. It didn't damage my cable, but making a habit of kinking the cable every time you used the dock probably would...
Of course, he may have found another way around this before he posted on Thingiverse. I'll try to find out for sure...

I cant wait until 3d printers are cheap(er). In the mean time I found this case http://www.amazon.com/gp/product/B006OBKDFQ/ref=oh_o03_s00_i03_details which allows me to dock without taking the tab out. Using the same method for using it in the stand of the case, you unhinge the bottom part of the case and dock it. Works pretty well.

It does not fit into my charging, 3.5mm out dock.
The dock has no room for ANY case. Maybe a ZIS.

HTC OEM Dock?

Anyone know when the OEM dock will be available?

The only dock I have seen was a Car cradle. I think it would be available 5/7
http://shop.htcpedia.com/htc-one-s-accessories.html

Maybe not OEM, but I found this on amazon http://www.amazon.com/Hyperion-Standard-Dock-Charger-Compatible/dp/B007X4DKDK

Super_Dork_42 said:
Maybe not OEM, but I found this on amazon http://www.amazon.com/Hyperion-Standard-Dock-Charger-Compatible/dp/B007X4DKDK
Click to expand...
Click to collapse
i'm not sure about that dock because if you look at the dock the micro usb is on the wrong side for the htc one s

Not original, http://www.amazon.co.uk/FoneM8-Sync...8LA2/ref=sr_1_1?ie=UTF8&qid=1336411974&sr=8-1

Do you think a HTC evo 3d dock would work with the HTC one s?

does anybody think that the htc one x dock will fit the htc one s?
http://www.ebay.com/itm/Hyperion-HT...Accessories&hash=item3f175a28d3#ht_500wt_1156
actually i found one on amazon where one of the reviewers said it does work and its cheaper on amazon.
http://www.amazon.com/Hyperion-Stan...DKDK/ref=sr_1_1?ie=UTF8&qid=1336965044&sr=8-1
I purchased the dock and it arrived today and I have to admit it does fit pretty nice in the dock.

I bought a evo 3d dock and it actually fits. Well you need to mod it abit but it works.

nightang3l said:
does anybody think that the htc one x dock will fit the htc one s?
http://www.ebay.com/itm/Hyperion-HT...Accessories&hash=item3f175a28d3#ht_500wt_1156
actually i found one on amazon where one of the reviewers said it does work and its cheaper on amazon.
http://www.amazon.com/Hyperion-Stan...DKDK/ref=sr_1_1?ie=UTF8&qid=1336965044&sr=8-1
I purchased the dock and it arrived today and I have to admit it does fit pretty nice in the dock.
Click to expand...
Click to collapse
I bought the Amazon one and am the second reviewer of it. The one thing I forgot to mention is how bright the LED is. It literally lit up my room at night and I could walk around as if I had a nightlight on. I cover it with electrical tape and problem solved. I also edited that review.

nightang3l said:
does anybody think that the htc one x dock will fit the htc one s?
http://www.ebay.com/itm/Hyperion-HT...Accessories&hash=item3f175a28d3#ht_500wt_1156
actually i found one on amazon where one of the reviewers said it does work and its cheaper on amazon.
http://www.amazon.com/Hyperion-Stan...DKDK/ref=sr_1_1?ie=UTF8&qid=1336965044&sr=8-1
I purchased the dock and it arrived today and I have to admit it does fit pretty nice in the dock.
Click to expand...
Click to collapse
This is perhaphs a stupid questions but just wanna be sure since the last time I bought a dock for my HTC Sensation, it came with two different cables - one for data transfer/syncing and another for charging and neither would do both at the same time which was obviously not what I wanted and so had to return it and all that drama.
My question is - Does this dock allow you to do data transfer/sync and charge the device at the same time?
Thanks!

Super_Dork_42 said:
I bought the Amazon one and am the second reviewer of it. The one thing I forgot to mention is how bright the LED is. It literally lit up my room at night and I could walk around as if I had a nightlight on. I cover it with electrical tape and problem solved. I also edited that review.
Click to expand...
Click to collapse
Since you bought it, let me ask you: Do you know if my phone will fit into the dock without taking off the TPU case that I keep the phone in?

I have this dock and the Diztronic case. It will NOT fit with the case on. It makes the phone too thick and just slightly too long to line up with the USB port.
Sent from my HTC VLE_U

KT said:
This is perhaphs a stupid questions but just wanna be sure since the last time I bought a dock for my HTC Sensation, it came with two different cables - one for data transfer/syncing and another for charging and neither would do both at the same time which was obviously not what I wanted and so had to return it and all that drama.
My question is - Does this dock allow you to do data transfer/sync and charge the device at the same time?
Thanks!
Click to expand...
Click to collapse
To answer your question is yes and it only comes with one usb wire.

jayelbird said:
Since you bought it, let me ask you: Do you know if my phone will fit into the dock without taking off the TPU case that I keep the phone in?
Click to expand...
Click to collapse
I don't know. I don't use a case on mine. But how thick is the side on that case? It probably wouldn't without taking the case off.
EDIT : I tried my brothers One S on my dock because his has a silicon case. It's a thin case, and with it on you can use the dock as a stand, but it's not quite enough for data or power connection. Given that, the TPU case here looks small enough that it might work.

Super_Dork_42 said:
I don't know. I don't use a case on mine. But how thick is the side on that case? It probably wouldn't without taking the case off.
EDIT : I tried my brothers One S on my dock because his has a silicon case. It's a thin case, and with it on you can use the dock as a stand, but it's not quite enough for data or power connection. Given that, the TPU case here looks small enough that it might work.
Click to expand...
Click to collapse
I just ordered the Hyperion stand from Amazon...it's available via Prime for $19.99.
I have the clear Cruzerlite Android case and will see if it works with it on when I get it.

Received the Hyperion Desktop Charging Cradle today via Amazon Prime.
The way the dock is designed seems that it will not work with any type of case on the HTC One.
Since the Cruzerlite case is so easy to put on & take off, it's not a real big deal...just a bit of an inconvenience.
I'm planning to keep this dock until something better comes along.
(RANT)
I'm just a bit upset with the delivery service that Amazon used.
They were so lazy that they actually threw my package from the sidewalk in front of my house onto my porch...there are 6 steps up to my front porch.
The thing that gets me is that the package fell off the porch and landed on the side of the house!
I saw this happen, but they drove off before I could give them a piece of my mind!
(END)

Quick question for those who bought the Hyperion Desktop Charging Cradle...does your One S indicate A/C or USB Charging when being charged on this dock?
Mine for some reason shows USB, but the Parameters Output: 5V 1000mAh (on the box)
Shouldn't that be A/C...not USB?

anyone try the oem evo 3d dock looks like it might be a good fir plus added hdmi functionality.
Anyone know if the hyperion will work with MHL adapter to bring hdmi functionality while docking?
I also found a dock made by a company KIDIGI that offers case compatibility while docked.

I am useing the evo 3d dock, Posted a picture. You would need to modify it alittle.
Sent from my HTC VLE_U using xda premium

I mean the OEM charging dock by HTC

Desktop chargers (with case on)

Just ordered a Rearth case from here: http://goo.gl/V5ccu
Curious if anyone has this case (or a similar type that does not obstruct the top/bottom) and uses a microUSB desktop charger?
I know, I know, this phone supports wireless charging.... but some of us want to 1) charge as fast as possible and 2) have our phone upright on our desk while charging.
I heard that the N4 fits in the GSIII desktop chargers but I doubt they do with any type of case on. Anyone have recommendations for a "universal" or otherwise desktop charger that will work with this phone/case combo?
I have found one that looks to be promising, except it's Philips brand and is an alarm clock... but still, people are saying it's fairly universal and at least one of the reviews says they are using it with an otterbox case on their phone:
http://goo.gl/4g4jd
Any thoughts or recommendations for other ones that might work?

174 views and not a single comment? Am I the only one who still uses a desktop dock for their phone? lol.

rossbeck said:
174 views and not a single comment? Am I the only one who still uses a desktop dock for their phone? lol.
Click to expand...
Click to collapse
I'm afraid so... Although I'm pretty sure that you can find a universal Micro USB dock. I'd check Amazon or eBay.

I'm in the same boat; I'd love to get a desktop charger, but can't find anything. I picked up a cheap ($5) S3 dock on eBay, but the plug doesn't extend far enough to connect to my N4 and the base isn't wide enough to fully support it either. I came across this one, but it is fairly pricey and I'm not sure I want to be the first person to try it out...

GrendelJapan said:
I'm in the same boat; I'd love to get a desktop charger, but can't find anything. I picked up a cheap ($5) S3 dock on eBay, but the plug doesn't extend far enough to connect to my N4 and the base isn't wide enough to fully support it either. I came across this one, but it is fairly pricey and I'm not sure I want to be the first person to try it out...
Click to expand...
Click to collapse
I am in the same boat , I would like to get a couple of docks one for work desk and one for home desk, I have tried to buy that one but for some reason they don't ship from Australia to me in Canada, I have found it here in ebay http://www.ebay.ca/itm/KiDiGi-Unive...ries&hash=item337e43a54e&_uhb=1#ht_5273wt_775
I am concerned with stress on the USB port, other than that I would love to buy it, does anyone know if it can cause stress on the USB or or should it be OK ?

I'm tempted by the KiDiGi one. I have a similar one for my S2 and it's been working fine for me so far...unfortunately its for the S2 only and so won't work with anything else.

I have this model for my iphone and it worked very well with a case.
http://www.amazon.com/Konnet-KN-832...UTF8&qid=1355257145&sr=8-1&keywords=icrado+s3
The Galaxy S3, et. al. version should have the jack facing the correct way and work perfectly for the Nexus 4.
As an aside, I did have to modify my dock for my iphone with case, because the little jack holder they have on this dock is enveloped in a larger plastic covering to keep it attached to the dock. I simply sawed off the top portion that keeps it in place, and superglued.. it has been solid ever since, and the connector reaches all the way into my case to connect just fine.
i'm probably going to get one of these for my

delrazor said:
I have this model for my iphone and it worked very well with a case.
http://www.amazon.com/Konnet-KN-832...UTF8&qid=1355257145&sr=8-1&keywords=icrado+s3
The Galaxy S3, et. al. version should have the jack facing the correct way and work perfectly for the Nexus 4.
As an aside, I did have to modify my dock for my iphone with case, because the little jack holder they have on this dock is enveloped in a larger plastic covering to keep it attached to the dock. I simply sawed off the top portion that keeps it in place, and superglued.. it has been solid ever since, and the connector reaches all the way into my case to connect just fine.
i'm probably going to get one of these for my
Click to expand...
Click to collapse
Awesome, that one looks pretty good.... I think I'll give it a whirl. I bit the bullet and ordered a Panasonic wireless charger from Japan for home/bedside use... but a dock like this should work great @ work. Thanks!

why not get a wireless charging pad and not worry about it?

glenroebuck said:
why not get a wireless charging pad and not worry about it?
Click to expand...
Click to collapse
From my OP:
"I know, I know, this phone supports wireless charging.... but some of us want to 1) charge as fast as possible and 2) have our phone upright on our desk while charging."
That's why. It's not just about charging... I like to use my phone as a clock/info station during the day, and having it upright allows me to do that. Now if they'd just make a vertical magnetic charging pad.....

I use the phillips fidelio as351 and it fits my phone with it's multitude of cases and even my N7. also makes for a portable speaker systsem as well as it runs on battery or AC adapter. Lot of places have this dock on clearance.

Seidio also makes one that works with cases.
http://www.seidioonline.com/samsung-galaxy-s-iii-desktop-charging-cradle-p/bd2-crdssx1.htm

The Seidio one looks cool...but the lack of a backing looks like its going to put a lot of pressure on the USB connector.
I was looking at wireless mats, but then if I decide to change my handset again next year I'll be back in the same position I am now.

Cheap ebay magnetic charger cable isn't that great!

I bought a couple of these from ebay http://www.ebay.co.uk/itm/151247910444?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
The USB plug end is huge, and the magnet is very weak. It's OK if you leave it flat on the desk, but picking the phone up means it's more than likely going to fall off.
I'd be wary of this kind if you're thinking of getting one.
I'd like one with a very strong magnet so that I can plug it into a USB battery pack and leave it in my pocket without wondering whether the magnet connector has fallen off.
Any suggestions?

I also bought such a cable. Mine is actually pretty good so far. Magnet power is good enough and the overall cable is just as good as a standard Sony cable. And only 3 euros incl. shipping.
Sent from my D5503 using XDA Free mobile app

AlanJC said:
I bought a couple of these from ebay http://www.ebay.co.uk/itm/151247910444?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
The USB plug end is huge, and the magnet is very weak. It's OK if you leave it flat on the desk, but picking the phone up means it's more than likely going to fall off.
I'd be wary of this kind if you're thinking of getting one.
I'd like one with a very strong magnet so that I can plug it into a USB battery pack and leave it in my pocket without wondering whether the magnet connector has fallen off.
Any suggestions?
Click to expand...
Click to collapse
I don't think you will have any luck finding one like that, as the connector was never designed to be used as a stand alone cable, it was always meant to be inside a charging stand/dock. Even if the magnet is very strong when pulling straight out from the connector (like being able to lift the phone with it) it will still come off super easy if pulled at an angle.
Maybe you could buy a cheap dock, then cut some in it so that all that is left will be like a clamp that goes around the edge of the phone and holds the cable steady? Or maybe some cheap case where you can glue tha connector to the case and only use it when charging?

Are they no official magnetic charger available? Isn't anyone here using?
Sent from my D5503 using XDA Free mobile app

Phukkitt said:
I don't think you will have any luck finding one like that, as the connector was never designed to be used as a stand alone cable, it was always meant to be inside a charging stand/dock. Even if the magnet is very strong when pulling straight out from the connector (like being able to lift the phone with it) it will still come off super easy if pulled at an angle.
Maybe you could buy a cheap dock, then cut some in it so that all that is left will be like a clamp that goes around the edge of the phone and holds the cable steady? Or maybe some cheap case where you can glue tha connector to the case and only use it when charging?
Click to expand...
Click to collapse
I That's given me an idea, perhaps these cables with some Sugru so that it aligns to the edge of the handset might do the trick!

Yup, I complained about the weakness of the magnet and got my money back from the eBay seller

pathaniya said:
Are they no official magnetic charger available? Isn't anyone here using?
Sent from my D5503 using XDA Free mobile app
Click to expand...
Click to collapse
The only official magnetic charger is the DK32 charging dock. The cables that most people buy are the same cables that is inside the dock, but it's impossible to know whether they are original parts or just copies since Sony doesn't officially sell that cable as a separate unit. The ones that sellers claim to be originals could very well only be meant as replacement parts or a simple way for phone repair shops to charge the phones.

The magnet is weak and actually takes some effort to get it to align, I was hoping that it would suck itself in like a MagSafe connector does. It also charges at about 70% the speed of the original USB charging cable even when connected to the same ipad wallwart.
I'm unimpressed with my knock-off cable but for the price, I can accept the mediocre quality.

zxqw said:
The magnet is weak and actually takes some effort to get it to align, I was hoping that it would suck itself in like a MagSafe connector does. It also charges at about 70% the speed of the original USB charging cable even when connected to the same ipad wallwart.
I'm unimpressed with my knock-off cable but for the price, I can accept the mediocre quality.
Click to expand...
Click to collapse
Well I paid 15 for mine (bought from a retailer) and they don't do refunds.
Lesson learnt...

What do you expect from such a small magnet? Imo it's quite strong already. I got this cable, which doesn't have a stronger magnet but aligns better, and it's cheap - I'm from Germany though: http://www.ebay.de/itm/-/291037184668
I also have the one the op has, with that one the phone started charging but it was so slow that it never finished. Modifiying the plastic and pins didn't help.

Not sure if it fits here, as my cable was not bought through ebay...
I got the OEM Magnetic Charging USB Cable for Sony Xperia Smartphone Black with Sony logo on the magnetic plug and it doesn't look too good: cheap to the looks and touch. The cable is thinner and feels flimsy compared to the USB charging cable that came stock with the phone. The magnet holds so-so but won't do too well when grabbing the phone, answering a call or whatever. The USB plug is huge, feels and looks cheap as well and can't be fully inserted into the charger; a bit of the metal part will stick out, that is.
I didn't do a full charge so far, so, can't commend on that part. I didn't measure the time but from what it felt like, the magnetic cable charges pretty fast - I'd say about the same rate as the stock micro USB cable (both with stock wall socket charger). But pay attention if you move the phone; the magnetic plug comes off really easy and might cause some bad surprise the next morning (the moment you wake up and notice your phone died on you and didn't wake you up ... about 2 hours ago, which was about an hour before you should've left to go to work and so on).
Now, if I'm not mistaken, witrigs says somewhere on their site that there would be huge difference between the Original OEM :angel: cable and the cheaper 3rd party ones the also offer. Honestly, I can't imagine the really cheap ones are much worse (as far as look & feel and usability goes).

I bought two of the following a few weeks back (for work and home) and overall am quite happy. The magnet is reasonably strong - I can lift the phone to check an email etc without it falling off - not sure about a phone call with it attached though...
cant post link - got it from dx-box website item SKU-8894
I have just ordered a 3rd cable for the car - after buying a case which has a cutout for the magnetic port but NOT for the microusb port:

harryw66 said:
I have just ordered a 3rd cable for the car - after buying a case which has a cutout for the magnetic port but NOT for the microusb port:
Click to expand...
Click to collapse
What case might that be? I am looking for a case with almost no cut-outs myself (camera/flash, magnetic charging port, headphone jack).

Wurstwarenfachverkäuferin said:
What case might that be? I am looking for a case with almost no cut-outs myself (camera/flash, magnetic charging port, headphone jack).
Click to expand...
Click to collapse
I got the Zukin Mini Ultra Thin Aluminium Bumper
I cant post links so you will just have to google it - sorry.
It has cutouts for the Magentic port, the Sim card, the camera and the power + volume buttons, headphones and bottom speaker - but NOT the SD card nor the usb port...

I bought a few of this original Sony magnetic charger cables for my Z1c the last months.
http://dx-box.com/brand-new-magnetic-usb-charging-cable-adapter-for-sony-xperia-z1-compact.html
It fits perfect and there are no problems while charging.
Regards, Chris
Sent from my Xperia Tablet Z (SGP321) using XDA Premium HD app.

harryw66 said:
I bought two of the following a few weeks back (for work and home) and overall am quite happy. The magnet is reasonably strong - I can lift the phone to check an email etc without it falling off - not sure about a phone call with it attached though...
cant post link - got it from dx-box website item SKU-8894
Click to expand...
Click to collapse
dhchris said:
I bought a few of this original Sony magnetic charger cables for my Z1c the last months.
http://dx-box.com/brand-new-magnetic-usb-charging-cable-adapter-for-sony-xperia-z1-compact.html
It fits perfect and there are no problems while charging.
Click to expand...
Click to collapse
Looks like you both ordered from the same site.Can you both attest to the magnet's ability to stick to the phone?

Xaeons said:
Looks like you both ordered from the same site.Can you both attest to the magnet's ability to stick to the phone?
Click to expand...
Click to collapse
The magnetic ability is okay, not very strong but if you let the phone on your desk, it´s no problem.
I don´t know if a stronger magnet can damage the phone.
I placed a cable of this in my car-holder and fixed it with a little point of glue and there´s no problem with vibrations while driving.
And also good at this cable:
You can not reverse polarities!
I hope i could help you.
Regards, Chris

dhchris said:
The magnetic ability is okay, not very strong but if you let the phone on your desk, it´s no problem.
I don´t know if a stronger magnet can damage the phone.
I placed a cable of this in my car-holder and fixed it with a little point of glue and there´s no problem with vibrations while driving.
And also good at this cable:
You can not reverse polarities!
I hope i could help you.s
Click to expand...
Click to collapse
I see, thanks!
On another note:
Hasn't anyone bought from Witrigs or is the shipping too far?
EDIT: Ok, witrigs' estimated shipping time is ridiculously long (for someone like me in south east asia) dx-box is better

Xaeons said:
I see, thanks!
On another note:
Hasn't anyone bought from Witrigs or is the shipping too far?
EDIT: Ok, witrigs' estimated shipping time is ridiculously long (for someone like me in south east asia) dx-box is better
Click to expand...
Click to collapse
I did. But I am in Europe, so, it doesn't say anything about shipping within Asia.
However, for my order, delivery took about 2 weeks, which is pretty fast compared to most of my previous orders from China (usually 3 to 4 weeks without the customs interfering).

Wurstwarenfachverkäuferin said:
I did. But I am in Europe, so, it doesn't say anything about shipping within Asia.
However, for my order, delivery took about 2 weeks, which is pretty fast compared to most of my previous orders from China (usually 3 to 4 weeks without the customs interfering).
Click to expand...
Click to collapse
I may order a magnetic charging cable from witrigs along with a glass back replacement part so I'd get more out of the shipping fee and shipping time.
There are options for shipping via different countries with different shipping costs (at the bottom upon checkout)

Magnetic charging lead

Hi folks,
Can any of you point me in the direction of a supplier of magnetic charging lead fit the z1 compact that will post to the UK at a sensible price?
Thanks.
John
Sent from my D5503 using XDA Free mobile app

Jwsail said:
Hi folks,
Can any of you point me in the direction of a supplier of magnetic charging lead fit the z1 compact that will post to the UK at a sensible price?
Thanks.
John
Sent from my D5503 using XDA Free mobile app
Click to expand...
Click to collapse
dx-box

Cheers for that. That link proved just the job -I haven't ordered one from there, but it turns out what I thought was the obvious search term on ebay abs amazon wasn't
Sent from my D5503 using XDA Free mobile app

Jwsail said:
Cheers for that. That link proved just the job -I haven't ordered one from there, but it turns out what I thought was the obvious search term on ebay abs amazon wasn't
Sent from my D5503 using XDA Free mobile app
Click to expand...
Click to collapse
If I were you I wouldn't... The cable has an extremely weak magnet, it comes off at the slightest touch. It would be impossible to use whilst the phone is charging. I could have got the really cheap cable from Amazon but because of the reviews about it's weak magnet I instead got a more expensive cable from mobilefun.co.uk. Unfortunately it was the same poor quality cable.

theprince1991 said:
If I were you I wouldn't... The cable has an extremely weak magnet, it comes off at the slightest touch. It would be impossible to use whilst the phone is charging. I could have got the really cheap cable from Amazon but because of the reviews about it's weak magnet I instead got a more expensive cable from mobilefun.co.uk. Unfortunately it was the same poor quality cable.
Click to expand...
Click to collapse
It's not that the magnet itself is weak, it's rather the design of it.
I can lift my phone with the magnet, even shake a little up and down without it falling off.
However, as you might know the easiest way to remove a magnet is to tilt/angle it, which the design of this magnet makes way too easy.
After all, the entire connector was designed around being mounted inside a charging stand, where the phone's angle to the connector would never change. Using it as a separate cable was never intended, the cable you can buy for example at dx-box is the very same cable that is supposed to be inside that charging stand.
I think if they designed a cable where the plastic around the magnet and the connectors was laying flush against the phone, tilting the cable would become less of an issue.
That said, I can use the phone just fine with the magnet connected as long as I don't pull on the cable, as the magnet is strong enough to handle the weight of the cable with no problem.

Phukkitt said:
It's not that the magnet itself is weak, it's rather the design of it.
I can lift my phone with the magnet, even shake a little up and down without it falling off.
However, as you might know the easiest way to remove a magnet is to tilt/angle it, which the design of this magnet makes way too easy.
After all, the entire connector was designed around being mounted inside a charging stand, where the phone's angle to the connector would never change. Using it as a separate cable was never intended, the cable you can buy for example at dx-box is the very same cable that is supposed to be inside that charging stand.
I think if they designed a cable where the plastic around the magnet and the connectors was laying flush against the phone, tilting the cable would become less of an issue.
That said, I can use the phone just fine with the magnet connected as long as I don't pull on the cable, as the magnet is strong enough to handle the weight of the cable with no problem.
Click to expand...
Click to collapse
Yup you are 100% right. I can indeed lift the phone up using the connector. The problem is with the tilt/angle as you've already mentioned above.

any of you is using thie cable from witrigs ?
http://www.witrigs.com/custom-magnetic-charging-cable-for-sony-xperia-z1-compact-black
i am also considering the magnector X, but if i plan to replace back by glass one, then purchase of this from witrigs is better economically. But don't know how does it works? How is it with charging speed and battery life?
and the last one, anyone using this original cable? and how much is it "original" ?
http://www.ebay.com/itm/Genuine-Ori..._PDA_Cables_Adapters&var=&hash=item3f32e3085b

I've bought one from Amazon and returned it, the cable was falling off at the slightest touch and it was even difficult to set right to charge.
I wanted it for charging the phone in my car, which already has a usb socket adapter, but with the falling out problem it was a no-go from the start.
On the plus side, I ended up with a Supremery charging dock, which is cheaper than Sony and works better (for me at least).
I don't use it in the car - just to be clear

but was it the same from amazon that i linked, or something far cheaper, "branded " by Sony ?
How is it with battery life on Supremery charging dock? Do you see shorter life and longer charging? Am asking because some guys were complaining for those on not original dock.
Thanks

Try this one out, apparently its got fantastic build quality and a very strong magnet.
Every review I have seen has given it 5/5 and most people mentioned buying another for the car/office etc :good:
http://www.ebay.co.uk/itm/Magnector...al_Components_Supplies_ET&hash=item4ad676cb92
they also do a standard cable...
http://www.ebay.co.uk/itm/Magnector...al_Components_Supplies_ET&hash=item4ad676cb92

I really would like to buy this Magnector X cable but I have not found a good way to buy and ship this to Austria/Europe. Any ideas where I can buy this with realistic shipping prices to get this inside the european union?

I bought 2 pieces of Magnector directly from producer: http://magnector.com/?product=magnector-x-adaptersony-xperia-magnetic-adapter
Calculating with delivery to Slovakia it was around 26€.
I am more than satisfied with this product and totally recommend it.
You can have only problem if you are using some case. It is designed for use without it.

Just order this, http://dx-box.com/high-performance-...e-magnetic-connection-and-charging-speed.html

edesired said:
Just order this, http://dx-box.com/high-performance-...e-magnetic-connection-and-charging-speed.html
Click to expand...
Click to collapse
this is a copy paste fake of magnectox
in description it says"Perfect conversion adapter for Micro USB to Sony Xperia Z1 or Z2 OR Z1S Charging Cable
Premium Detailed Finish with complete retail package and adapter pouch
2 Times High Magnetic Power than original Sony Xperia Charging Cable
Maximum Charging Speed from Magnector's Enhanced Technology.
Applied "Reverse Attachment Charging Protection" Technology to protect your device
"

Lasantha said:
this is a copy paste fake of magnectox "
Click to expand...
Click to collapse
What do you mean by that?
What do you want to tell us with that?
Do you mean "Magnector X" ?
The Question is: Is it nevertheless a good product?
(I don't really care if they just copy&paste the description of another "premium" product)
I already ordered two of those cables so maybe I have wasted some euros on a cable no one of the posters above has ever tested?!

ViennaLinux said:
What do you mean by that?
What do you want to tell us with that?
Do you mean "Magnector X" ?
The Question is: Is it nevertheless a good product?
(I don't really care if they just copy&paste the description of another "premium" product)
I already ordered two of those cables so maybe I have wasted some euros on a cable no one of the posters above has ever tested?!: confused:
Click to expand...
Click to collapse
Well let us know [emoji1]

I got this one and it is fine. Works a treat. http://www.ebay.co.uk/itm/121400865231?_trksid=p2059210.m2749.l2649&ssPageName=STRK:MEBIDX:IT

snitter said:
I got this one and it is fine. Works a treat. http://www.ebay.co.uk/itm/121400865231?_trksid=p2059210.m2749.l2649&ssPageName=STRK:MEBIDX:IT
Click to expand...
Click to collapse
I have 3 of the dx-box ones:
http://dx-box.com/brand-new-magneti...dapter-for-sony-xperia-z1-xperia-z-ultra.html
The magnet may not be ask strong as the High Performance one, but its plenty strong enough for me. I use one in my car and the lead has never detached even when I have gone over pot holes or bumps in the road.
Also, at home I find it stays attached well enough for everyday usage.

Ordered from ebay same product as Sony official except it didn't have Sony logo and was like 3 times cheaper.

I have received the magnector cable and can confirm that the magnet is very powerfull. One can easily lift up the phone by the cable.
It doesn't however automatically snap on to the two (tiny) charging pins. It takes a little bit of practice to make it work.