Related
All right, my issue is I have no clue in following directionshttp://forum.xda-developers.com/showthread.php?t=1777970 that are listed here, I understand how to get to command line, but I am unsure from there, I would love a good detailed instructions or something to help me out. I'm trying to flash a custom rom that requires me to have an updated cwm. Thank you so much and sorry for my noobish question!
http://forum.xda-developers.com/showthread.php?t=1777970 This is what I am trying to do.
HiTideBlastoise said:
http://forum.xda-developers.com/showthread.php?t=1777970 This is what I am trying to do.
Click to expand...
Click to collapse
its simple man if you have a custom recovery already all you need to do is flash the zip file like any other file you would in CWM.
if you dont have a custom recovery already use odin check out vincoms stickie in the developement page and flash the recovery thru odin and that it . pretty simple
crashpsycho said:
its simple man if you have a custom recovery already all you need to do is flash the zip file like any other file you would in CWM.
if you dont have a custom recovery already use odin check out vincoms stickie in the developement page and flash the recovery thru odin and that it . pretty simple
Click to expand...
Click to collapse
the issue lies in that the only way to install the custom rom is to upgrade my custom recovery to the latest one, and thanks for your response!
EDIT: I researched online and found a method with fastboot and the recovery image, I will try this, is this a wrong method or is it possible?
You don't need fastboot at all if you already have a custom recovery installed. Just download the cwm flashable zip and flash it just like you would a rom (install zip from sd card > choose zip from internal/external > choose the cwm zip and choose install, then choose the recovery option to reboot recovery to boot into the new recovery.
Sent from my Paranoid Skyrocket
Quando Omni Flunkus Moritati
If you have CWM or ClockWork Mod installed on your phone.
----- ALL YOU HAVE TO DO IS PUT THE CWM TOUCH ZIP FILES ON YOUR EXTERNAL SD CARD AND NOW GO TO RECOVERY MODE AND FLASH IT, GO TO INSTALL FROM SD CARD, I'M PRETTY SURE YOU KNOW IT? OR IF NOT MESSAGE ME I'LL HELP YOU STEP BY STEP.
If you DON'T have CWM.
----- download a cwm and flash it through odin and after having cwm, do that instruction above.
HiTideBlastoise said:
the issue lies in that the only way to install the custom rom is to upgrade my custom recovery to the latest one, and thanks for your response!
EDIT: I researched online and found a method with fastboot and the recovery image, I will try this, is this a wrong method or is it possible?
Click to expand...
Click to collapse
You're all jacked up, dude. Just grab the zip file, place it on your sd card, and flash it in recovery.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
All righr, I'm stupid. It is all good now. Thanks everyone.
Hi,
I'm thinking about rooting my Note 10.1 (mostly because I want to use DicertoryBind/Link2SD) via ClockworkMod Recovery.
My questions:
I won't receive any OTA updates, cause the status will be custom, right?
I want to stay on stock FW, what can I do to update my tablet if there is a new OTA:
Can I directly flash the FW from sammobile with odin or are they not campatible with cwm? Would that mean that every time there is a new OTA, I have to unroot, flash back to stock recovery, get the OTA, flash back cwm and root again?
Isn't there a way to flash the update while keeping all my data (just like normal OTA does) and root ?
Thanks!
Kamairo said:
Hi,
I'm thinking about rooting my Note 10.1 (mostly because I want to use DicertoryBind/Link2SD) via ClockworkMod Recovery.
My questions:
I won't receive any OTA updates, cause the status will be custom, right?
Yes
I want to stay on stock FW, what can I do to update my tablet if there is a new OTA:
Can I directly flash the FW from sammobile with odin or are they not campatible with cwm? Would that mean that every time there is a new OTA, I have to unroot, flash back to stock recovery, get the OTA, flash back cwm and root again?
You can flash using ODIN, but you will need to re root the device, also chances are you will not lose data but in rare cases you will need to do a factory reset which will mean you lose all your data.
Isn't there a way to flash the update while keeping all my data (just like normal OTA does) and root ?
Above answer should answer this also but you will need to re-root the device
Thanks!
Click to expand...
Click to collapse
Hope this answers all queries
You can flash using ODIN, but you will need to re root the device, also chances are you will not lose data but in rare cases you will need to do a factory reset which will mean you lose all your data.
Click to expand...
Click to collapse
Okay, that means I download the firmware from for instance sammobile, flash it using ODIN (will that be PDA only, like flashing cwm?), and then re root means install superSU again from cwm or installing cwm completely new?
*edit* Thanks for the sticky!
Yes you can use this post to know how to install using odin http://forum.xda-developers.com/showthread.php?t=2080366
You do not require CWM to root you can use the exynos patch apk to root you can download the apk from here
http://forum.xda-developers.com/showthread.php?t=2050297
samir_a said:
Yes you can use this post to know how to install using odin http://forum.xda-developers.com/showthread.php?t=2080366
You do not require CWM to root you can use the exynos patch apk to root you can download the apk from here
http://forum.xda-developers.com/showthread.php?t=2050297
Click to expand...
Click to collapse
Hey, thanks so far, I just installed CWM, everything went fine, but if I look at the system status it still says "offical", does that mean I can receive OTA's? Or won't that work cause of CWM?
Also I believe before it didn't say "official" but "normal".
*edit* okay, nevermind, after a reboot it sys now "custom"
Since you have rooted your device you can also use Mobile ODIN to flash the roms from sammfirmware directly on your note 10.1. You just make sure everroot is ticked but if you think you might loose root then have both the CWM.tar file saved on your device, its a tiny file so no real space lost or if you don't care about CWM but want root access then keep the exynosexploit.apk on your device. I have everything I need on the sd card in case I cant get to a PC. Much better when I'm not tied to the PC...
ultramag69 said:
Since you have rooted your device you can also use Mobile ODIN to flash the roms from sammfirmware directly on your note 10.1. You just make sure everroot is ticked but if you think you might loose root then have both the CWM.tar file saved on your device, its a tiny file so no real space lost or if you don't care about CWM but want root access then keep the exynosexploit.apk on your device. I have everything I need on the sd card in case I cant get to a PC. Much better when I'm not tied to the PC...
Click to expand...
Click to collapse
Thanks so far, but theres one question left: From what you've said I think it's possible to flash with odin or mobile odin while CWM is still installed, what will happen to CWM after the flash? Is it completely gone (stock recovery comes with the firmware?!) or does "re root" only mean that I have to reinstall superSU with CWM?
You will go back to stock recovery but you might retain root if you ticked everoot function....
As I said earlier, you can reflash CWM onto your Note using mobile ODIN if you have the CWM.tar file stored on your device...
+1 for Mobile Odin if you're wanting to stay stock.
Use Exynos Abuse to root the first time.
Install Mobile Odin pro.
Backup your EFS partition off the device.
Install CWM using Mobile Odin and make a nandroid backup.
Back up apps with Titanium if required.
Download the new stock from you want and use Mobile Odin to install with Everoot selected.
Use Mobile Odin to install CWM.
Simplest method I've found by far.
Sent from my GT-N7100 using xda premium
After rooting with exynos abuse root, can you just do a factory reset to make you stock again to get OTA's?
I don't believe so (prepared to be corrected) but if you reinstall the stock rom without Everoot ticked and factory reset you'll be back to stock unmodified.
Sent from my GT-N7100 using xda premium
Never tried but I don't think so, The OTA checks for an unmodified system and even though stock recovery says its official the status in settings is "Custom".
What if I'm on the stock rom (never went custom) and stock recovery. All I did was root? Would a recovery restore allow me to get OTA's?
if you are on stock recovery then why would you restore recovery.
Yes if you are rooted only you will receive OTA if you are on the orignal rom (rom from country which note was purchased irrespective of the version you are on)
samir_a said:
if you are on stock recovery then why would you restore recovery.
Yes if you are rooted only you will receive OTA if you are on the orignal rom (rom from country which note was purchased irrespective of the version you are on)
Click to expand...
Click to collapse
That is my situation, exactly. So, I can take OTAs in my present situation? I used #2 root option from zedomax. I haven't changed anything or used a custom rom. All I want to do is get current on my updates, and retain root and CWM.
Should I also use TriangleAway, and at what point? Thank you.
Apologies to the OP, but I've been waiting for a chance to resolve this.
If you used method 2 you have replaced the stock recovery... That's what CWM recovery means...
You're flash counter will now be one and need to be reset using triangle away. No OTA for you...
ultramag69 said:
If you used method 2 you have replaced the stock recovery... That's what CWM recovery means...
You're flash counter will now be one and need to be reset using triangle away. No OTA for you...
Click to expand...
Click to collapse
Thank you.
Hi eveyone, I updated my stock from 4.0 to 4.1 through odin and it was really painless. Sorry if this sounds lazy but can you install cm the same way? Doing the whole CW etc. seems a lot of steps - i'd rather upload one file only if possible. Thanks!
Guiyoforward said:
Hi eveyone, I updated my stock from 4.0 to 4.1 through odin and it was really painless. Sorry if this sounds lazy but can you install cm the same way? Doing the whole CW etc. seems a lot of steps - i'd rather upload one file only if possible. Thanks!
Click to expand...
Click to collapse
i do not think you can install zip with odin
LitD said:
i do not think you can install zip with odin
Click to expand...
Click to collapse
Thanks. You cannot - what I mean is: is CM ever realeased as a TAR-compatible ODIN file?
That can certainly be done. But it's not the norm.
Sent from my SGH-T699 using Tapatalk
James chdset
Nardholio said:
That can certainly be done. But it's not the norm.
Sent from my SGH-T699 using Tapatalk
Click to expand...
Click to collapse
Thanks Nardholio. I'm obviously missing some important feature CWM offers thatthe "odin process" does not. Is it seamless backup amd restore? Or is it the possibility of adding patches and new stuff - say, gapps on top of CM?
Thanks again!
G.
Deleted because I reposted in the intended thread
Guiyoforward said:
Thanks Nardholio. I'm obviously missing some important feature CWM offers thatthe "odin process" does not. Is it seamless backup amd restore? Or is it the possibility of adding patches and new stuff - say, gapps on top of CM?
Thanks again!
G.
Click to expand...
Click to collapse
CWM offers both of those things as an advantage, yes. You also can use CWM with the Stock image to gain the backup and restore features, amongst others.
And really, if you're already running Stock JB, the process is as simple as:
Place The cm-10.2-XXXXXXXX-NIGHTLY-apexqtmo.zip and gapps zip files on your phone, either on the 'internal' or external SD Card. (This even is optional, as they can be sideloaded if you have adb)
Flash CWM with Odin or Heimdall.
Reboot into recovery
Flash the cm nightly.zip
Flash the gapps.zip
wipe /cache with CWM.
Issue a factory reset with CWM.
Reboot to system.
If you're still on ICS, then you just need to add the steps of flashing the JB-stock-modem.zip and JB-stock-bootloader.zip before flashing the cm-nightly.zip (Turn GPS OFF before flashing these, specifically the modem, just to be on the safe side)
If you perform a backup with CWM before flashing anything, you can restore your stock system as you please.
If you simply want to root your relay, flash an appropriate recovery flashable zip copy of Superuser or SuperSU instead of flashing anything else.
kilr00y, along with providing the JB-stock-modem and JB-stock-bootloader recovery-flashable zip files, also provided a JB-stock-image.zip that can be used to go back to a stock-like system.
CWM allows you for a much greater amount of control over your phone, even when still running a stock image, due to the flexibility of being able to flash new applications directly to the system directories (such as Superuser/SuperSU) without having to have everything be signed by Samsung.
Magamo said:
CWM offers both of those things as an advantage, yes. You also can use CWM with the Stock image to gain the backup and restore features, amongst others.
And really, if you're already running Stock JB, the process is as simple as:
Place The cm-10.2-XXXXXXXX-NIGHTLY-apexqtmo.zip and gapps zip files on your phone, either on the 'internal' or external SD Card. (This even is optional, as they can be sideloaded if you have adb)
Flash CWM with Odin or Heimdall.
Reboot into recovery
Flash the cm nightly.zip
Flash the gapps.zip
wipe /cache with CWM.
Issue a factory reset with CWM.
Reboot to system.
Click to expand...
Click to collapse
THANKS! This is by far the easiest step by step instructions I've seen, and gladly I'm on stock JB already.
Will give this a try
thanks again!
just booted into apex CM 347 nightly after the... ehem... peculiar apex logo thanks a lot for your effort.
now, I am a noob but can find my way around. I still think the whole process (CM and co, not the relay 4g per se) is a bit convoluted and underdocumented. just an example: I downloaded the IMG file from CWM but it took me a while to figure out that I had to transform it into md5 for it to play nice with odin, etc.
buy hey. I'm going to setup my system.
thanks everyone!!
Guiyoforward said:
just booted into apex CM 347 nightly after the... ehem... peculiar apex logo thanks a lot for your effort.
now, I am a noob but can find my way around. I still think the whole process (CM and co, not the relay 4g per se) is a bit convoluted and underdocumented. just an example: I downloaded the IMG file from CWM but it took me a while to figure out that I had to transform it into md5 for it to play nice with odin, etc.
buy hey. I'm going to setup my system.
thanks everyone!!
Click to expand...
Click to collapse
In all honesty, ODIN itself is an underdocumented POS, the recovery.img file (or in this case, the renamed apexq_recovery-10.2.img file if you were following along with the wiki) comes right from the build process, it can be flashed directly without much tooling about with it using heimdal, which is an open source replacement for ODIN, that works very well. Heimdall can be used optionally with a GUI, but I personally use it from the command line, to get it to flash a recovery image to the recovery partition of a Relay, it's simply:
heimdall flash --recovery apexq_recovery-10.2.img
Guiyoforward said:
just booted into apex CM 347 nightly after the... ehem... peculiar apex logo thanks a lot for your effort.
now, I am a noob but can find my way around. I still think the whole process (CM and co, not the relay 4g per se) is a bit convoluted and underdocumented. just an example: I downloaded the IMG file from CWM but it took me a while to figure out that I had to transform it into md5 for it to play nice with odin, etc.
buy hey. I'm going to setup my system.
thanks everyone!!
Click to expand...
Click to collapse
How did you transform the img to md5 (I can also take the cwm in md5 format from the root thread, am I right?) ?
So I can flash anything without root using this method (even recovery) ? I couldn't do this with my desire Z, it's confusing me !
Which recovery should I flash to use cm10.2 (the cwm or the apexq_recovery-10.2.img ?) ?
=> If I use an older recovery I can't flash any jelly been rom's ?
robuser007 said:
(I can also take the cwm in md5 format from the root thread, am I right?)
Click to expand...
Click to collapse
yes, you can
robuser007 said:
So I can flash anything without root using this method (even recovery) ? I couldn't do this with my desire Z, it's confusing me !
Click to expand...
Click to collapse
there are several differences. you can flash recovery via odin to a not rooted device
robuser007 said:
Which recovery should I flash to use cm10.2 (the cwm or the apexq_recovery-10.2.img ?) ?
Click to expand...
Click to collapse
google 'install cyanogenmod samsung relay' and follow 'how to install cyanogenmod for samsung relay' wiki. 'installing cyanogenmod from recovery' is the same as for desire z
I have a Galaxy Tab 2 7.0 gt3113. It is rooted,and I want to install a rom. The factory rom/kernel lags...get stuck ....and with all I have read the roms out there make a big difference. But I'm having a problem....I'm using rom manager and rom toolbox and I cant seem to install a rom. It load the rom whether from the computer or the download option but when it boot into recovery I get an error saying that the sd card is not found and I just end up manually re-booting the device....Ive tried this a few times choosing different things at the screen...a(abd....cashe....external storage....) it all ends up the same.....anyone have any idea what this means? I'm learning as I go....and was thinking about un-rooting my device then rooting it again.....maybe I did something wrong?
Complety bewildered....
Speedy8311 said:
I have a Galaxy Tab 2 7.0 gt3113. It is rooted,and I want to install a rom. The factory rom/kernel lags...get stuck ....and with all I have read the roms out there make a big difference. But I'm having a problem....I'm using rom manager and rom toolbox and I cant seem to install a rom. It load the rom whether from the computer or the download option but when it boot into recovery I get an error saying that the sd card is not found and I just end up manually re-booting the device....Ive tried this a few times choosing different things at the screen...a(abd....cashe....external storage....) it all ends up the same.....anyone have any idea what this means? I'm learning as I go....and was thinking about un-rooting my device then rooting it again.....maybe I did something wrong?
Complety bewildered....
Click to expand...
Click to collapse
if you are able to boot into recovery then please wipe cache partition and do a factory reset and then try to revert to stock rom
Speedy8311 said:
But I'm having a problem....I'm using rom manager and rom toolbox
Click to expand...
Click to collapse
For starters, stay away from ROM Manager! It's known to cause different sorts of problems on different devices while installing CWM and ROMs. I have only good things to say about ROM Toolbox in terms of tweaks and utilities, but never used it for ROM installation, and would suggest not to. Just download the ROM you want from its original source, put it on internal or external storage, and flash using your recovery (my personal all-time favourite is PhilZ Touch CWM, not sure what you are using). Do the proper wipes before flashing (full wipe is always recommended, especially between stock and CM/AOSP ROMs. Make sure you also flash other possibly applicable components (depends on the ROM and your preferences) -- gapps, kernel, etc. See if it works that way. I just don't see any reason to use 3rd-party apps for "ROM management" -- the simpler the process, the better.
I'm going to try to put a new rom on the tab tonight without using a program,i have a question though...I have to press power and the up volume or power and the down volume when i flash the new rom
Speedy8311 said:
I'm going to try to put a new rom on the tab tonight without using a program,i have a question though...I have to press power and the up volume or power and the down volume when i flash the new rom
Click to expand...
Click to collapse
Power+Volume up
This is the screen I get....what do I press? I know its a silly question but this IS where I was at and getting the could not find sd card error
Speedy8311 said:
i have a question though...I have to press power and the up volume or power and the down volume when i flash the new rom
Click to expand...
Click to collapse
Speedy8311 said:
This is the screen I get....what do I press? I know its a silly question but this IS where I was at and getting the could not find sd card error
Click to expand...
Click to collapse
You are in recovery... To get to download mode on P31xx for using Odin you need to press and hold Volume DOWN + Power.
ok.....so I need to be in the download mode to download anything including roms and kernels....so I have to use odin to download stuff then?
Speedy8311 said:
ok.....so I need to be in the download mode to download anything including roms and kernels....so I have to use odin to download stuff then?
Click to expand...
Click to collapse
I think you need to do some research.
http://forum.xda-developers.com/showthread.php?t=1900055
Speedy8311 said:
ok.....so I need to be in the download mode to download anything including roms and kernels....so I have to use odin to download stuff then?
Click to expand...
Click to collapse
Man, that sounds scary! You really need to do some reading on the basics, before you screw something up.
You can flash ZIP files from recovery, including ROMs, kernels, recoveries, and apps. However, you need Odin, a PC connection, and a download mode on your tab in order to flash things like official ROM packages (typically in tar.md5 format).
If you want to flash the ROM in zip format, you can do that in recovery. In general, if you have problems doing that, your other option is Odin and a stock ROM; then you can start over.
Looking closely at your photo, you have a stock recovery. You can only flash signed zips from it, which means you won't be able to flash custom ROMs or kernels. I would suggest to start with flashing a custom recovery (look up PhilZ Touch CWM, it's the best). This will make things easier for you.
P.S.: Sorry, didn't mean to sound harsh... It seems things got a bit confusing in the process, so questions and answers didn't really line up...
well ....I have been doin a lot of research,maybe too much lol....but the only thing I can get outta all of it is that to flash a kernel or rom or both I need to go into recovery(power and up volume) and do a wipe of the cashe and install.....then it seems to trail off there with a ok now your done go enjoy....
I cant seem to find any kinda description of what happens in between the wiping of the cashe/devlick and the install...I keep ending up in the recovey section wheather I use rom manager rom toolbox or just me following directions. I will say this though.....I do not see the cwm logo in the recovery....I stiil have the android and he lays there dead then does a quick flash to an error message then I get the menu....but there is no "mount and storage" and "backup and restore" option for me to choose from I put the tab into recovery mode and took a picture....its in the previous post.
I am still using the stock rom and kernel btw....Im not sure if I have mentioned that. I havnt been able to flash anything.
Speedy8311 said:
I am still using the stock rom and kernel btw....Im not sure if I have mentioned that. I havnt been able to flash anything.
Click to expand...
Click to collapse
Yeah, I got that. Sorry for the confusion! I updated my previous post, take a look. Stock recovery seems to be your problem here.
No harm done lol I appreciate all the help.....I'm a bit new at this,but I learn quick. Ok....I may be putting CWM or pfilze wrong way on my tab I loaded it from the play store,along but when I rooted tab I'm 99% positive that I installed CWM also . when I plug it into the computer I can see a clockwork folder.do I neeed to use odin to install philz?
is there a specific PhilZ Touch for the tab 2? or can I just download it to the computer and send it to my tab via odin?
Speedy8311 said:
when I rooted tab I'm 99% positive that I installed CWM also . when I plug it into the computer I can see a clockwork folder.do I neeed to use odin to install philz?
Click to expand...
Click to collapse
Not sure exactly what and how you did previously, but the fact is that you've got a stock recovery now. You need a custom recovery - it doesn't have to be PhilZ, even though I strongly recommend it. You can install standard CWM, too, no problem with that. To install PhilZ, you either need CWM to be already installed, or you need to use Odin.
For details and install instructions on PhilZ CWM, look here:
http://forum.xda-developers.com/showthread.php?t=2202667
Oh, BTW, as an alternative to Odin, look up the Mobile Odin by Chainfire on Play Store. It allows you to flash Odin packages from your device directly. Very useful tool! Free version will do, but the paid one has more features.
Speedy8311 said:
is there a specific PhilZ Touch for the tab 2? or can I just download it to the computer and send it to my tab via odin?
Click to expand...
Click to collapse
Yes, there is. Look in the thread I linked above.
Yep.....i got it stuck in forever boot using mobile odin.... Uugggh....I'm gonna return everything to stock and re-root it.....what ever I did the first time rooting and installing cwm I must a missed a step or something. I'll repost my progress when I'm back to stock and rooted properly
MERRY CHRISTMAS EVERYONE!!!!
YAY!!! Merry Christmas to me!!! I unrooted and repaired my tab 2 7.0 . I also re-rooted it and installed philztouch and everything is installed properly this time. Funny thing though.....after I got the tab working and before I re-rooted it...I tried to do the factory update to 4.2.2 ,since now I'm only on 4.1.1,it said that I had the latest updates available and my apps and phone list didn't auto load like when I first got my tab....hhhmmmm...anyways it works now and all root stuff and twrp is properly :highfive::highfive: only one more question...now that TWRP is working....when I want to download a kernel or rom do I leave it in Zipped form when I put it on the tab and the tab unzips it and flashs it or do I unzip it? .....sorry for all the basic questions but ya cant learn unless you ask questions
Thanks for every ones help with my Tab 2!!!
Speedy8311 said:
YAY!!! Merry Christmas to me!!! I unrooted and repaired my tab 2 7.0 .
Click to expand...
Click to collapse
Well, congrats, and merry Christmas! A bit confused - are you using PhilZ CWM, or TWRP?
As for zip files, leave them as they are, don't unzip - the recovery will install them. Just a suggestion - whenever possible, especially for large files like complete ROMs, verify the MD5 checksum to make sure your file is not corrupt during download.
just went into recovery and it says Philz touch 6
How do you unroot the GS3 and get back to stock unrooted? I am currently just stock rooted. I'm just done with flashing and don't want to worry about something happening to my phone while I'm rooted, and am sick of it not being able to take the VZW update on a daily basis. I understand there is an unroot in the superuser app, is it as simple as clicking that and it will unroot by itself? Is there more I need to do? Thanks for your help!
Bump
Many ways to unroot, you could use SuperSU and select remove root, then uninstall the app then reboot or use universal unroot app from play store.
buhohitr said:
Many ways to unroot, you could use SuperSU and select remove root, then uninstall the app then reboot or use universal unroot app from play store.
Click to expand...
Click to collapse
Thank you. Once you perform either or these methods, can you still root again in the future if you decide to?
I unrooted through SuperSU. Went to install the VZW update and it went into Teamwin Recovery. When it was trying to update the software and running all the checks, etc. I saw "checking for MD5 file...no MD5 file found." What is this and is this what is causing me to not be able to take the update? Am I supposed to still have Teamwin Recovery? How do I get rid of it? Root Checker said I'm unrooted now.
Where do I go from here? Thanks again!
Bump
irl5fan said:
Bump
Click to expand...
Click to collapse
Flash this file:
http://forum.xda-developers.com/showthread.php?t=2795659
With this guide:
http://forum.xda-developers.com/showthread.php?t=2586319
Then you're unrooted and up to date, but you'll erase all of your data. So backup all the pictures and music you want to keep.
Sent from my HTC6525LVW using Tapatalk
BadUsername said:
Flash this file:
http://forum.xda-developers.com/showthread.php?t=2795659
With this guide:
http://forum.xda-developers.com/showthread.php?t=2586319
Then you're unrooted and up to date, but you'll erase all of your data. So backup all the pictures and music you want to keep.
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
None of the links to the files have anything in them. Is there another way? Any other location to find these files?
irl5fan said:
None of the links to the files have anything in them. Is there another way? Any other location to find these files?
Click to expand...
Click to collapse
You're right, try to search for it in Google. I didn't bookmark anything.
Sent from my HTC6525LVW using Tapatalk
irl5fan said:
I unrooted through SuperSU. Went to install the VZW update and it went into Teamwin Recovery. When it was trying to update the software and running all the checks, etc. I saw "checking for MD5 file...no MD5 file found." What is this and is this what is causing me to not be able to take the update? Am I supposed to still have Teamwin Recovery? How do I get rid of it? Root Checker said I'm unrooted now.
Where do I go from here? Thanks again!
Click to expand...
Click to collapse
Dude.... You shouldn't be rooting if you don't know what TWRP is.... LMAO!
You need to flash stock recovery to take the OTA, you should of backed it up when you first flashed TeamWin to the device and it would of been a simple reflash through Flashify and it would of been good.
Now you need to download Odin (A PC flash tool) and reflash through that programme....
Sent From V500
Using XDA App
unroot gs3
LiamAtkins90 said:
Dude.... You shouldn't be rooting if you don't know what TWRP is.... LMAO!
You need to flash stock recovery to take the OTA, you should of backed it up when you first flashed TeamWin to the device and it would of been a simple reflash through Flashify and it would of been good.
Now you need to download Odin (A PC flash tool) and reflash through that programme....
When did I say I didn't know what TWRP is? So if I flash stock recovery will that get me where I want to be...stock unrooted and able to take OTA updates. I never did flash any custom roms or anything while I was rooted.
Click to expand...
Click to collapse
irl5fan said:
When did I say I didn't know what TWRP is? So if I flash stock recovery will that get me where I want to be...stock unrooted and able to take OTA updates. I never did flash any custom roms or anything while I was rooted.
Click to expand...
Click to collapse
Sorry, I realise my reply come of a little arsey, I will explain.
If you take the OTA in stock recovery it will go through, but as soon as you flash a custom recovery you give up the right to an OTA whilst on said recovery,
Instead you either:
1. Flash a custom ROM, and do updates with there ROM team.
2. Wait for stock ROM to come in a flashable zip for Custom Recoverys.
If you have root and stock recovery and take it, sometime it will go through, sometimes it won't.... Like Samsung Knox for example....
Sometimes it will take but as soon as you boot back up you will have no root.
If you OTA in Custom Recovery it will boot to TWRP and most likely abort straight away and bad things will ocure.
Mixed Partitions no ROM etc...
Now back to your question....
Yeah Stock non rooted you can take OTA (but in Samsung's case, they have a flash counter, that keeps track of system mods)
Best bet would be flash through Odin, to out-the-box firmware and take the OTA from there...to avoid any conflicts with the system.
I do apologise for my earlier post mate, write back if you got it upgraded.
LiamAtkins90 said:
Sorry, I realise my reply come of a little arsey, I will explain.
If you take the OTA in stock recovery it will go through, but as soon as you flash a custom recovery you give up the right to an OTA whilst on said recovery,
Instead you either:
1. Flash a custom ROM, and do updates with there ROM team.
2. Wait for stock ROM to come in a flashable zip for Custom Recoverys.
If you have root and stock recovery and take it, sometime it will go through, sometimes it won't.... Like Samsung Knox for example....
Sometimes it will take but as soon as you boot back up you will have no root.
If you OTA in Custom Recovery it will boot to TWRP and most likely abort straight away and bad things will ocure.
Mixed Partitions no ROM etc...
Now back to your question....
Yeah Stock non rooted you can take OTA (but in Samsung's case, they have a flash counter, that keeps track of system mods)
Best bet would be flash through Odin, to out-the-box firmware and take the OTA from there...to avoid any conflicts with the system.
I do apologise for my earlier post mate, write back if you got it upgraded.
Click to expand...
Click to collapse
No problem. This has been a long drawn out process over the past few months, so forgive me for all the questions and details of events. This is where I'm at. When I started the unrooting process, as stated above, used triangle away to reset the counter and then I unrooted through SuperSU. According to root checker apps I am unrooted, but I believe my bootloader is still unlocked. And obviously still have TWRP. Phone Info: SCH-I535, Version 4.1.2, Baseband I535VRBMF1.
Given that info, do I still flash the stock firmware (from here?--->) (http://downloadandroidfiles.org/download-sch-i535-vzw-i535vrbmb1-1360821900-zip/) and then flash stock recovery? Does flashing stock firmware re-lock my bootloader? Thanks for your help.
irl5fan said:
No problem. This has been a long drawn out process over the past few months, so forgive me for all the questions and details of events. This is where I'm at. When I started the unrooting process, as stated above, used triangle away to reset the counter and then I unrooted through SuperSU. According to root checker apps I am unrooted, but I believe my bootloader is still unlocked. And obviously still have TWRP. Phone Info: SCH-I535, Version 4.1.2, Baseband I535VRBMF1.
Given that info, do I still flash the stock firmware (from here?--->) (http://downloadandroidfiles.org/download-sch-i535-vzw-i535vrbmb1-1360821900-zip/) and then flash stock recovery? Does flashing stock firmware re-lock my bootloader? Thanks for your help.
Click to expand...
Click to collapse
So you used Triangle Away to clear the flash counter?
Great, so the only thing you need now is the stock recovery image for your device,
I would say just flash the stock recovery image through Odin, but their is that many models
with different numbers, it would be easier flashing 4.1.2 firmware again through Odin.
In future bud if your gonna be messing with ROMs and Recovery files I recommend this:
Flash recovery with this:
https://play.google.com/store/apps/details?id=com.cgollner.flashify&hl=en_GB
(Backup Stock Recovery 1st)
Backup Stock EVERYTHING, Boot, System, EFS, Data etc in Recovery of choice.
Move backup to computer or cloud storage.
Then all you need to do to go back is triangle away, restore stock backup, restore stock recovery, unroot through SuperSU.
And the OTA should work.
Sent From V500
Using XDA App
LiamAtkins90 said:
So you used Triangle Away to clear the flash counter?
Great, so the only thing you need now is the stock recovery image for your device,
I would say just flash the stock recovery image through Odin, but their is that many models
with different numbers, it would be easier flashing 4.1.2 firmware again through Odin.
In future bud if your gonna be messing with ROMs and Recovery files I recommend this:
Flash recovery with this:
https://play.google.com/store/apps/details?id=com.cgollner.flashify&hl=en_GB
(Backup Stock Recovery 1st)
Backup Stock EVERYTHING, Boot, System, EFS, Data etc in Recovery of choice.
Move backup to computer or cloud storage.
Then all you need to do to go back is triangle away, restore stock backup, restore stock recovery, unroot through SuperSU.
And the OTA should work.
Sent From V500
Using XDA App
Click to expand...
Click to collapse
I just want to clarify before I go ahead and do anything and get myself into a pickle. Are you saying to flash 4.1.2 firmware instead of stock recovery? Or am I still flashing both of them? If so, which order? Does that link I posted look like it is the correct firmware to you? Also, I have an older version of Odin on my computer, does that matter or should I get the newer one first?
irl5fan said:
I just want to clarify before I go ahead and do anything and get myself into a pickle. Are you saying to flash 4.1.2 firmware instead of stock recovery? Or am I still flashing both of them? If so, which order? Does that link I posted look like it is the correct firmware to you? Also, I have an older version of Odin on my computer, does that matter or should I get the newer one first?
Click to expand...
Click to collapse
Stock recovery is in the firmware file mate, when you flash the firmware it flashes the recovery, clears internal SD card (move pictures, videos, music to PC) & Radio, Modem, EFS basically everything on the phone gets flashed to how it is when you buy it from a store. Whats your model number?
And no it shouldn't matter, I've never seen any issues rise with using older Odin Programmes.
Do you have experience using Odin?
If not:
http://forum.xda-developers.com/galaxy-s3/help/guide-odin-flash-guide-t1671969
That guide covers how to use it, where to place the firmware file etc.
Any questions just ask
Sent From V500
Using XDA App
LiamAtkins90 said:
Stock recovery is in the firmware file mate, when you flash the firmware it flashes the recovery, clears internal SD card (move pictures, videos, music to PC) & Radio, Modem, EFS basically everything on the phone gets flashed to how it is when you buy it from a store. Whats your model number?
And no it shouldn't matter, I've never seen any issues rise with using older Odin Programmes.
Do you have experience using Odin?
If not:
http://forum.xda-developers.com/galaxy-s3/help/guide-odin-flash-guide-t1671969
That guide covers how to use it, where to place the firmware file etc.
Any questions just ask
Sent From V500
Using XDA App
Click to expand...
Click to collapse
My model number is SCH-I535. I have used Odin before, but I'll take a look at the guide just to make sure. Thanks for your help!
LiamAtkins90 said:
Stock recovery is in the firmware file mate, when you flash the firmware it flashes the recovery, clears internal SD card (move pictures, videos, music to PC) & Radio, Modem, EFS basically everything on the phone gets flashed to how it is when you buy it from a store. Whats your model number?
And no it shouldn't matter, I've never seen any issues rise with using older Odin Programmes.
Do you have experience using Odin?
If not:
http://forum.xda-developers.com/galaxy-s3/help/guide-odin-flash-guide-t1671969
That guide covers how to use it, where to place the firmware file etc.
Any questions just ask
Sent From V500
Using XDA App
Click to expand...
Click to collapse
I just wanted to say thanks for helping out someone in our forums with the VZW variant, I was going to chime in but I see you had things under control. It's just odd to see so many people in our forums who don't have the version we have
From my Wicked S3 on SOKP
ShapesBlue said:
I just wanted to say thanks for helping out someone in our forums with the VZW variant, I was going to chime in but I see you had things under control. It's just odd to see so many people in our forums who don't have the version we have
From my Wicked S3 on SOKP
Click to expand...
Click to collapse
No problem, glad I can help.
Verizon edition Models tend to get overlooked as oppose to International variants which is a shame, I think both should get equal recognition. Not just Sammy Verizon, most Verizon models and also Google Play Edition Model Phones/Tablets get pushed aside.... Crying shame.
LiamAtkins90 said:
Stock recovery is in the firmware file mate, when you flash the firmware it flashes the recovery, clears internal SD card (move pictures, videos, music to PC) & Radio, Modem, EFS basically everything on the phone gets flashed to how it is when you buy it from a store. Whats your model number?
And no it shouldn't matter, I've never seen any issues rise with using older Odin Programmes.
Do you have experience using Odin?
If not:
http://forum.xda-developers.com/galaxy-s3/help/guide-odin-flash-guide-t1671969
That guide covers how to use it, where to place the firmware file etc.
Any questions just ask
Sent From V500
Using XDA App
Click to expand...
Click to collapse
Everything worked out great, flashed the stock firmware and was able to take the OTA. Thank you so much for your help, it's greatly appreciated!