Hi
Guys,I've got a problem with charger
When I connect it screen shows that device is charging, but the percentage is going down:-!
Wut to do,guys?
Sent from my Xoom using XDA App
Get Battery Monitor Widget from the Market and looksee what current is going in or out of the battery during this period. Reset the Battery Usage stats by rebooting and then see what is consuming most. If you have GPS/Wireless/Bluetooth/Etc all turned on the drain can be 400 - 500 mA. If your charger is poor then it might not pump in what is draining out.
+1
Having the same issue..
*#*#4636#*#* type this and enter battery info my Voltage changes between 4022-4200 is that normal ?
as I know it must be 3.7v stable
Yes, that's the normal voltage it charges at.
its normal use not when charging...
Mad_Wolf said:
its normal use not when charging...
Click to expand...
Click to collapse
Still normal!
Dude that's how the battery discharges, the voltage will keep dropping until the phone is inoperable.
Title. PLEASE RESPOND VIA POLL
I think it slows down the charging time..
Sent from my GT-S6500 using xda premium
TimeAndroid said:
Title.
Click to expand...
Click to collapse
yes it does.
and the battery gets hot
Yes, the battery gets hot and the heat decreases battery life (and capacity).
Battery getas hot and life is depleted also if you using your phone while charging ...there is high possiblity of busting your battery
Hit like if i helped you
It becomes hotter, especially when you use it while charging, so surely it decreases battery capacity
maybe yes, i think it counts as CDC and the battery get heat so fast
yes it does
the best status for charging is charging while the phone is off
Stated capacity on every website I can find is 3,000mAh, but Ampere and Kernel Adiutor both say 3,900. Anyone know why? I don't have the Pro, just the plain old 8.
Yeah, it is 3000. Softwares just mess it up.
Days Tech said:
Yeah, it is 3000. Softwares just mess it up.
Click to expand...
Click to collapse
Using system panel to monitor the battery life. It also shows 3900 mah. Is there any way to fix this?
Try the app again at 100% charge both plugged in and disconnected. How i fixed it in both ampere and accu battery.
flyinghighaero said:
Try the app again at 100% charge both plugged in and disconnected. How i fixed it in both ampere and accu battery.
Click to expand...
Click to collapse
Charged the phone to 100% while running the app in the background. Cleared app data. Restarted the app while being charged and also after disconnecting the charger. Still 3900. Tried Ampere, also showing 3900. Can u pls explain the process u followed a bit more?
Fast charging is not working on my poco x3 pro. I'm using the original charger and original cable. It was working fine earlier that shows charging animation like 65.89% (the fast charging animation with increasing numbers after the decimal)
Now it's not showing that fast charging animation and charging speed is reduced a bit. Tried restarting device.
What is the issue? Can anybody suggest a fix
affan848 said:
Fast charging is not working on my poco x3 pro. I'm using the original charger and original cable. It was working fine earlier that shows charging animation like 65.89% (the fast charging animation with increasing numbers after the decimal)
Now it's not showing that fast charging animation and charging speed is reduced a bit. Tried restarting device.
What is the issue? Can anybody suggest a fix
Click to expand...
Click to collapse
Have you tested it with an app like Ampere??
I'm asking you because the fact that it doesn't show the decimals, doesn't mean the fast charging is not working. Sometimes that happens (software bug) but after that it charges quick anyways.
I mean the same bug happens to me from time to time but the fast charging it's working anyways.
Check for signs of case swelling especially if there's been a drop in battery capacity.
If present replace battery asap.
Erratic fast charging can be a sign of battery failure which can happen at any time but becomes more likely as the battery ages.
i think the new .6 update did this. fast charging is working but the animation of percentage increasing is gone. prolly a bug will be fixed in next update
trambolique said:
Have you tested it with an app like Ampere??
I'm asking you because the fact that it doesn't show the decimals, doesn't mean the fast charging is not working. Sometimes that happens (software bug) but after that it charges quick anyways.
I mean the same bug happens to me from time to time but the fast charging it's working anyways.
Click to expand...
Click to collapse
Tested it with ampere. The charging varies between 12 to 15 watts. I think its a bug in 12.0.6
blackhawk said:
Check for signs of case swelling especially if there's been a drop in battery capacity.
If present replace battery asap.
Erratic fast charging can be a sign of battery failure which can happen at any time but becomes more likely as the battery ages.
Click to expand...
Click to collapse
Thanks. The phone is new. No such signs. I think issue after the system updated
affan848 said:
Thanks. The phone is new. No such signs. I think issue after the system updated
Click to expand...
Click to collapse
You're welcome.
Make sure the battery temp is at least 82°F when the charge cycle starts. If the temperature is too low fast charging will not engage.
I have that 87-92°F works best*.
If it too hot fast charging will disengage, usually above 101°F or so.
Fast charging will disengage at about the 70-80% charge level then low level charge after 90% to avoid battery damage.
On a new phone I would suspect a hardware failure; the brick or cable, charging port PCB or mobo.
It should want to go.
*keep an eye on the temperature as it charges and cool as needed to keep the temperature between 85-99F or so. Fast charging can create a lot of heat fast. Some heat is needed, excess is not. As ambient temperatures exceed 85-90F cooling will be needed.
affan848 said:
Thanks. The phone is new. No such signs. I think issue after the system updated
Click to expand...
Click to collapse
I have same issue ita show turbo charge but no decimal points
I feel i have the same issue with low charging speed with recent update 12.5.1
How to know the watt speed using ampre application to check?
YaMii4 said:
I feel i have the same issue with low charging speed with recent update 12.5.1
How to know the watt speed using ampre application to check?
Click to expand...
Click to collapse
Current multiply by voltage for normal charge.
Ampere x Voltage = Watt
Normal charge has 5V.
Is this normal? When my screen is on while charging, it stays around 1000mA and when screen is off, it goes upto 2800mA approximately.
My device is just 2 days old and updated to 12.0.5.0 (Indian Variant)
MakDroid said:
View attachment 5336077
Is this normal? When my screen is on while charging, it stays around 1000mA and when screen is off, it goes upto 2800mA approximately.
My device is just 2 days old and updated to 12.0.5.0 (Indian Variant)
Click to expand...
Click to collapse
Normal. Phones charge faster when screen off.
Observe 15~20 minutes screen off and also record the battery percentage before and after.
Can't know if it's fast charge or normal charge with only amperage.
Turn on super power saving and then leave the device to charge itself
It will receive full 33w with full charge in an hour or so
For me this animation sometimes does not work but the charging speed is same. Miui is full of random bugs
mshoaib7 said:
For me this animation sometimes does not work but the charging speed is same. Miui is full of random bugs
Click to expand...
Click to collapse
dis the answer, it's totally software bug... you should clear data on "Theme" and speed animation charging will back!
Edit: and apply an stock Lockscreen
trambolique said:
Have you tested it with an app like Ampere??
I'm asking you because the fact that it doesn't show the decimals, doesn't mean the fast charging is not working. Sometimes that happens (software bug) but after that it charges quick anyways.
I mean the same bug happens to me from time to time but the fast charging it's working anyways.
Click to expand...
Click to collapse
Mine fast charges
trambolique said:
Have you tested it with an app like Ampere??
I'm asking you because the fact that it doesn't show the decimals, doesn't mean the fast charging is not working. Sometimes that happens (software bug) but after that it charges quick anyways.
I mean the same bug happens to me from time to time but the fast charging it's working anyways.
Click to expand...
Click to collapse
Mine fast charges, I believe. Although, the decimals dont show anymore. How can I fix this?
Its.shadab said:
Mine fast charges
Mine fast charges, I believe. Although, the decimals dont show anymore. How can I fix this?
Click to expand...
Click to collapse
I don't know, it's a bug so maybe in the next update it works for you again.
Try using a slow charger and then the fast charger.
affan848 said:
Fast charging is not working on my poco x3 pro. I'm using the original charger and original cable. It was working fine earlier that shows charging animation like 65.89% (the fast charging animation with increasing numbers after the decimal)
Now it's not showing that fast charging animation and charging speed is reduced a bit. Tried restarting device.
What is the issue? Can anybody suggest a fix
Click to expand...
Click to collapse
I have the same problem as well with my poco x3 pro. It doesn't show the little number. All original cable and charger. When i bought it, it was working but after a few days it was gone. Also i updated to the lastest miui which is 12.5.2. i hope this is just a software bug and not a hardware. Please update me if your charging animation is back. If it came back please tell me on how you got it back. Glad to know that i wasnt alone.
trambolique said:
I don't know, it's a bug so maybe in the next update it works for you again.
Try using a slow charger and then the fast charger.
Click to expand...
Click to collapse
tried, didnt work.
officialauxter said:
dis the answer, it's totally software bug... you should clear data on "Theme" and speed animation charging will back!
Edit: and apply an old Lockscreen, just apply
Click to expand...
Click to collapse
What do you mean?
Can you make screenshots?