On my Atrix 2, I was on 2.3.6 GB Stock but unlocked AT&T phone.. I downloaded latest ICS FXZ and followed all the steps in Noob's Guide.. and it successfully flashed.. It showed PASS in RSDLite.. Phone rebooted.. Now it says INVALID FLASH MODE (S) (BOOT FAILURE)..
INVALID CG OTV (CG:SYSTEM): INVALID SP DATA
INVALID HAB (CG:SYSTEM, STATUS: 0X004E)
I don't understand, RSDLite said PASS. Absolutely no errors. But still this problem.
Can someone help.??
I tried to flash the same file again, RSDLite fails. Now I'm really terrified that I can't make it to work.
Please help.. Thank you.!!
are you sure that you flashed this Firmware ?
if yes then try agian .... but make sure that your fone doesnt drain below 40%
Yes I tried the exact same..!! Trying again now...!!
Oh God.!! Now its showing Battery LOW.. Now What.????
keep fone plugged to wall charger and see if its getting charged or not !!
if not ... then you might have to charge battery from mobile shop .... unless u know some charging tricks
remember ..... gOOgle is your best buddy
Yeah.. Will be back to you tmrw.. I am taking battery to the shop..
dont go to shop at college road. or Gangapur road ..... they'll charge you more !
find some in city area or CIDCO .... those are cheaper
Related
I so need asstn. I bout brick my daughter b-day present an she mad !! Samsng galaxys,,i can get to download mode ..but i have tried 20 diff firmware files on every version of odin ,,an several times it says pass ,succeeded,with the green box an all ..but evry time it still only stall on vibrant logo or galaxy s logo .an if plugged in it only shows a battery w no charge.. I not sure if i just not found the correct firmware or what step i missing...ive dl over 15 diff files an same thing please tell me it still savable ..i buy the beer
pppllllllzzzzzzzzzzzzzz assistance
i haveq] galxaxy s ,in dire need of rescue,,its my daughter b-day present an i bout brick searched an read all thruogh xda but same result http://forum.xda-developers.com/showthread.php?t=1039126
Can you please upload a screenshot of odin because I have to know which boxes you have checked and which files you are using.
And: how long have you been waiting before restarting the phone? Because some people reported that they stucked 15 minutes at the logo but suddenly it worked...
Sent from my GT-I9000 using XDA App
i afraid it really a paper weight now
I ran heimdall with eugene373_samsungS_froyo_pda. An it ran succsefully an said flash complet restarted but never restarted. Now it just black screen w no actuivity at all .. Is it dead now for sure.
monster2321 said:
I ran heimdall with eugene373_samsungS_froyo_pda. An it ran succsefully an said flash complet restarted but never restarted. Now it just black screen w no actuivity at all .. Is it dead now for sure.
Click to expand...
Click to collapse
maybe you should try Odin(better with those firmwares with partition included?), but how come yours can't be charged?But no worries, you can send it to Samsung service to unbrick your SGS or try the homemade JIG
http://forum.xda-developers.com/showthread.php?t=819551
anyway, my advice is you post this problem at the Samsung Galaxy S Q/A thread...more experienced SGS users can help you there...
hello every one i tried to update my g2x stock , to the 2.3 and when i did it with he lg update tool, it went through the process and i havd to reboot my phone , and then it just got stuck on the S/W and nothing happened i left it for hours , but nothing , so i came to the xda forum and i start reading , and i kept trying the KDZ_FW_UPD_EN.7z, with the kdz file but nothing , it kept on failing , so i spoke to tech support they told me its back order , so they transferred me to lg and they told me i have to send it in i also tried a hard reset but still nothing , same S/w issue , is this mean the phone is brick
Just wondering.. what % did you get stuck at with the LG update tool?
Mines got stuck at 4% because I didnt have the LGUSBModemDriver_WHQL_Eng_Ver_4.8.1 install. So it prompt to do so, and click Refresh.
If you have no luck with the LG update tool, maybe try reflash the NVFlash and do a restore?
I'm running Windows 7 64bit btw.. and after I downloaded and installed that driver.. it only took me 5min to install the update...
740man - did you follow this guy's instructions? I skipped #2 and #4 and it worked great for me (on XP).
http://forum.xda-developers.com/showthread.php?p=15878353#post15878353
Mine quit on 5% BTW. That tool is terrible.
yes i tried the last step , even in windows xp it was just failing i left it for hours , and it just would not wanna reboot , i followed the instructions step by step i get all the way till it tells you to disconnect and remove the battery then press restart , i been working on it since 8 this morning , i been using the lg update tool but when that failed i tried the method above and still same issue , it just wouldn't go pass the s/w , i think there going to send me refurbish one , cheap [email protected]#%$%s
http://forum.xda-developers.com/showthread.php?t=1179533&page=23
I was having same issue and this is how I solved it! Check link! Post 222.
....
i hope i wont get a refurbish phone , what are the chances of getting one any ways , any one know
Yes Hello I need some direction from someone anyone, here's whats up I DL GB updates after ota did not take. I got stuck in Bootloader file code corrupt error.Ran RSD 9 full sbf failed on BP thru. I looked for 6 hrs everywhere and best I found was a bootloader SBF which when I ran thru rsd 9 passed and the system only sbf.W/ these I got the M boot logo bout 3-15 sec then screen flips off and goes to Bootloader all ok? I can get in 2 secondary recovery but wiping data/cashe did not help. I'm now mayb thinking that i need a gb sbf file, which I dont think exists ,any HELP SUGGESTIONS , anything would be appreciated, thanx
Ptree
Hey guys,
Im new to xda-developers, and also a noob with my galaxy s plus, just got it one week ago .
And how it had come, i tried to flash my i9001 with Gingerbread 2.3.4 (XXKP4) from samfirmware.com.
OK, first i put my phone into download mode, connected it to my pc, and started flashing with odin multi downloader 4.33. i was wondering how long it took to transfer the data, but after 10 minutes there happened something, and it went on until system.ext4. Exactly at this point, after 1 hour (!) flashing, nothing happened anymore, i waited for one more hour, and finally disconnected my phone.
after trying to restart, the SAMSUNG logo appeared, and then then i saw the following logo:
At the left side is a mobile, at the right side a pc. there is an arrow, from mobile to pc, that is disturbed by a warning sign.
I can still enter download mode, but every try i did failed. always stops at the
system.ext4
file!
Pleeease, i need your help guys! i dont belive it is bricked, but dont know what to do now, already tried to flash original firmware, doenst work!!
greetings
nothing to worry about
since you still can enter the download mode u can flash ur device
try another computer or another os or try other usb ports
River99 said:
Hey guys,
Im new to xda-developers, and also a noob with my galaxy s plus, just got it one week ago .
And how it had come, i tried to flash my i9001 with Gingerbread 2.3.4 (XXKP4) from samfirmware.com....
Click to expand...
Click to collapse
that happens to me too, about few weeks ago.
what I did, I downloaded and re-flashed this one:
http://bit.ly/i9001firmware
If I can remember it right, that was 2.3.3 ~ after successfully re-flashing with the above firmware for around 10 minutes. I redo it again in 2.3.4 (I took my 2.3.4 from samfirmware too!)
by the way, if you are re-flashing using a desktop pc... I suggest for you to use the USB port that was built from the motherboard. It was more reliable than using a hub.
Hey guys, I have the same problem.. Can somebody pleaaaaaaaase tell me a good solution?
Vickoy, there is a password on the firmware.... Somebody PLEASE help me!
FlorisNL said:
Hey guys, I have the same problem.. Can somebody pleaaaaaaaase tell me a good solution?
Vickoy, there is a password on the firmware.... Somebody PLEASE help me!
Click to expand...
Click to collapse
Password is "samfirmware.com"
can't flash any firmware!
same problem here, wile trying to flash I9001XXKG1 I9001XXKG3 I9001XXKP4
odin cant' get past system.ext4 download.. or system.img.ext4 download..
then i close odin after 15min of waiting, flash it again with Boot_loader.tar
and phone boots normally
all firmwares from samfirmware
odin 4.43
update
this worked
http://forum.xda-developers.com/showpost.php?p=16695354&postcount=79
when flashing KP4 use .ops+boot+PDA then .ops+boot+CSC and so on
this works for me
ok first off let me say i dont have very much back story on this phone and im not to new to android but im deffinatly more knoledgble with ios that said im a quick study this is the error im getting
bootloader
30.04
err:a5,70,70,00,00
mem,map blank
service req'd
battery low
cannot program
from all the research ive done this error is quite simular to the sbf .602/.621 error not sure if this phone was ota updated or not also the error is a little different as it says cannot program instead of ok to program now for my setup i am on a macbook pro running a windows 7 ultimate vm i have rsd lite 5.7 i think what i understood to be the latest moto drivers and the .602 sbf now heres the next problem when i plug in the phone it goes straight to bl mode for a few seconds then black screen and i cant seem to get it to connect to rsd any help plz!!!!!
Umm few mnths back i faced similar pb, dont remember the whole way as i am technician and flash almost 20 phns daily, try google droid x sbf flash guide.. Good luck