Related
First thing's first - I'm definitely not a newb.
My phone (Sensation 4G on T-Mobile USA) is depended upon for work and person use. I've been playing with a lot of custom ROMs and each and every one of them has their own little quirks.
Because of this I have seriously considered going back to stock, but I want to be sure that I can receive OTA updates.
I realize that I can get everything back to stock via RUU, HOWEVER, with SuperCID in place, would I still be able to receive OTA updates? I've read that the RUU doesn't replace the SuperCID with the shipped value.
If not, how would I get the SuperCID back to the original value (which unfortunately I don't have - phone was bought used and already rooted) ?
Thanks so much!
You can get the OTA with superCID the RUU will unroot your phone and reinstall the stock recovery. You will need the stock recovery or you could Brock your phone
If you want to be on the safe side and rewrite your cid do the steps you did to get superCID but instead of 11111111 put T-MOB010 That should get you back on track
Sent from my HTC Sensation 4G using xda app
Sinistra425 said:
You can get the OTA with superCID the RUU will unroot your phone and reinstall the stock recovery. You will need the stock recovery or you could Brock your phone
If you want to be on the safe side and rewrite your cid do the steps you did to get superCID but instead of 11111111 put T-MOB010 That should get you back on track
Sent from my HTC Sensation 4G using xda app
Click to expand...
Click to collapse
So, by flashing the RUU it won't replace the 4EXT recovery with the factory one?
JWhipple said:
So, by flashing the RUU it won't replace the 4EXT recovery with the factory one?
Click to expand...
Click to collapse
Yes it will!
Yes it willow replace the 4EXT with the stock recovery I have recently have taken my sensation 4g back to stock with the ruin and it reinstalls everything from firmware to recovery
Sent from my HTC Sensation 4G using xda app
JWhipple said:
So, by flashing the RUU it won't replace the 4EXT recovery with the factory one?
Click to expand...
Click to collapse
The RUU will unroot your phone and reinstall the stock recovery
Sinistra425 said:
Yes it willow replace the 4EXT with the stock recovery I have recently have taken my sensation 4g back to stock with the ruin and it reinstalls everything from firmware to recovery
Sent from my HTC Sensation 4G using xda app
Click to expand...
Click to collapse
What about the cid??
Sent from my Sensation XE
No cid will stay the same but that has nothing to do with how your phone runs that just allows you to install the ics custom rom because of the firmware updates needed to run them
Sent from my HTC Sensation 4G using xda app
Sinistra425 said:
No cid will stay the same but that has nothing to do with how your phone runs that just allows you to install the ics custom rom because of the firmware updates needed to run them
Sent from my HTC Sensation 4G using xda app
Click to expand...
Click to collapse
I'm thinking if I need to use warranty?
Sent from my CM7 Sensation XE using xda premium
Can you claim warranty with superCID in placE?
SensationX1 said:
Can you claim warranty with superCID in placE?
Click to expand...
Click to collapse
you could.. but since you can easily rewrite your cid, why worry?
after u flash stock rom
1. Super CID will remain
2. S-off still remain
I can download OTA from server but after download finish it will not install with the error about variant system (means we modified software).
anardjai said:
after u flash stock rom
1. Super CID will remain
2. S-off still remain
I can download OTA from server but after download finish it will not install with the error about variant system (means we modified software).
Click to expand...
Click to collapse
Are you sure for this? From what I know IF you install stock ROM from RUU, it will automatically unroot the phone, get back to S-On and of course replace your bootloader with the original one. However to be honest I don't know what happens if you install stock from clockwork recovery - maybe that way the bootloader will not be replaced and you will still have S-Off and root.
TO JWhipple: The Super CID shouldn't matter for RUU. However you could always change it back to your phone/operator version before installing RUU.
@up: not in Sensation. After installing stock with RUU, S-OFF will remain still. To get S-ON back follow this guide. I'm sure, tested on my own Sensation
What would be the right order to go with:
Do you start with changing the SuperCID back to the original one forst or would you first have to go back to S-ON?
SIMPLY TELL ME ONE THING
that can we have official update after installing the latest ruu with s-on and unroot but with super cid?????
thanks
---------- Post added at 10:22 AM ---------- Previous post was at 10:20 AM ----------
installing stock ruu doesnt change the phone to s-on or unroot.......but see the guide to do s-on then u might get the official updates
The ruu simply changes your rom to stock unrooted, changes radio, recovery and hboot. It doesn't change stuff like cid and s-off. In theory you can get ota updates with supercid and s-off. The only thing required, would be the stock recovery
Sent from my HTC Sensation XE with Beats Audio using Tapatalk
hello how r u ?
seems u got allot exp. in this i try to get back to my stock ruu rom after installing ginger bread arhd and pg53img 3.12 it stops and say error 155 what should i do to get back to stock
dexter93 said:
The ruu simply changes your rom to stock unrooted, changes radio, recovery and hboot. It doesn't change stuff like cid and s-off. In theory you can get ota updates with supercid and s-off. The only thing required, would be the stock recovery
Sent from my HTC Sensation XE with Beats Audio using Tapatalk
Click to expand...
Click to collapse
Quick question, a few guides to going back to stock Sensation point or that you have to downgrade the firmware and radio. Is downgrading the radio (and firmware for that matter) necessary before flashing stock ROM with RUU? I did it with the last sensation before sending it in for warranty replacement, but only because the guide suggested it. But next time I wouldn't do it if I don't have to. Thanks ahead.
serega12 said:
Quick question, a few guides to going back to stock Sensation point or that you have to downgrade the firmware and radio. Is downgrading the radio (and firmware for that matter) necessary before flashing stock ROM with RUU? I did it with the last sensation before sending it in for warranty replacement, but only because the guide suggested it. But next time I wouldn't do it if I don't have to. Thanks ahead.
Click to expand...
Click to collapse
No it is not necessary. It will be required only if your device is S-ON and RUU version is older. Just remeber that if your phone is S-OFF and you want to put it S-ON again, do that after you have flashed stock ROM.
I've gotten totally accustomed to flashing on Samsung devices..
Currently have AT&T One X
- Rooted
- Bootloader Unlocked
- Running CleanRom 1.0
- Build Number 1.88.707.2
I'd like to get it back to just a rooted AT&T stock version so that I can make my own adjustments. I'm a bit confused as to the easiest way to do this.
05GT said:
I've gotten totally accustomed to flashing on Samsung devices..
Currently have AT&T One X
- Rooted
- Bootloader Unlocked
- Running CleanRom 1.0
- Build Number 1.88.707.2
I'd like to get it back to just a rooted AT&T stock version so that I can make my own adjustments. I'm a bit confused as to the easiest way to do this.
Click to expand...
Click to collapse
Someone would have to make a rooted stock from. Unless you want to go back to 1.73 which you would get the bugs it had. If you did that would require a firmware downgrade. There is a thread in dev section. Have you tried updating to cleanrom 2.5.5 the most recent version with tons of fixes and such.
Sent from my HTC One X using xda premium
if you haven't flashed something else or found this already, this link is to a stock, CWM ready version of the 1.85.502.3 RUU. read the OP first, because this version is NOT rooted.
You presumably already have SuperCID if you have bootloader unlocked. All you have to do is:
1) Relock bootloader
2) Run whatever RUU you want
3) Unlock bootloader again
4) Install CWM
5) Root via One click for 1.73 or 1.82, or install SuperSU via CWM for 1.85.
The pre-rooted deodexed 1.85 version posted in the response above is also a good approach (install via CWM). But its not fully stock, as in its deodexed. But if you want to install mods, this is a good thing anyway, since many of them require deodex. You also don't need to mess with relocking and unlocking the BL again. But its not clear what you want to do, if you want to return to the original shipped 1.73 firmware or not.
cortez.i said:
if you haven't flashed something else or found this already, this link is to a stock, CWM ready version of the 1.85.502.3 RUU. read the OP first, because this version is NOT rooted.
Click to expand...
Click to collapse
Thanks for the link.
redpoint73 said:
You presumably already have SuperCID if you have bootloader unlocked. All you have to do is:
1) Relock bootloader
2) Run whatever RUU you want
3) Unlock bootloader again
4) Install CWM
5) Root via One click for 1.73 or 1.82, or install SuperSU via CWM for 1.85.
The pre-rooted deodexed 1.85 version posted in the response above is also a good approach (install via CWM). But its not fully stock, as in its deodexed. But if you want to install mods, this is a good thing anyway, since many of them require deodex. You also don't need to mess with relocking and unlocking the BL again. But its not clear what you want to do, if you want to return to the original shipped 1.73 firmware or not.
Click to expand...
Click to collapse
Thanks,
Went this route and everything worked great. Now just need to flash the deodexed rom so I can make tweaks.
Sent from my HTC One X using xda premium
Will at&t ruu 2.20.502.7 will work on supercid 1111111 at&t hox to get back to stock?
I am having at&t htc one x bootloader with :
**** tampered ****
**** unlocked ****
evita pvt shp s-on rl
hboot-1.09.0000
radio-0.19as.32.09.09_l
opendsp-v28.1.0.32.0504
emmc-boot
apr 2 2012,21:08:24
installed twrp 2.2.0 recovery and stock rooted rom 2.23707.2 asia generic.
Now the problem is, i am facing the mobile signal(not wifi) dropping issues and i have to revert back to at&t stock rom, i have downloaded the official at&t ruu 2.20.502.2.....exe,
but i am concerned with the doubt that will the ruu will work 100% on supercid 111111 without any problem after relocking the bootloder or do i have to revert back the stock at&t cid, and if yes then what is the procedure to revert back the stock at&t cid???????
If you ever want to unlock the bootloader again leave the cid alone. BTW you can just flash the radio from the new ota if you want. There's a thread in development section with radios
gunnyman said:
If you ever want to unlock the bootloader again leave the cid alone. BTW you can just flash the radio from the new ota if you want. There's a thread in development section with radios
Click to expand...
Click to collapse
thanks for the help,appreciable. But i don't want to flash just the radio, coz i already did that, but it did not solve my problem. So the question still continues..Can i run Ruu with the current supercid 111111 or do i have to revert it back to stock???
SORRY FOR BAD ENGLISH. ITS NOT MY FAMILIAR LANGUAGE.
You don't have to change cid to flash the ruu just relock the bootloader
gunnyman said:
you don't have to change cid to flash the ruu just relock the bootloader
Click to expand...
Click to collapse
thanks for the help,
Are you already on 2.20? If not, why not run 1.85 RUU?
thedauntlessone said:
Are you already on 2.20? If not, why not run 1.85 RUU?
Click to expand...
Click to collapse
good question.
thedauntlessone said:
Are you already on 2.20? If not, why not run 1.85 RUU?
Click to expand...
Click to collapse
Doesn't look like the op is on 2.20, the hboot for 2.20 is 1.14.0002.
Absolutely Right, i am not on 2.20,
Sent from my HTC One XL using xda app-developers app
Sir this is not about 2.20 or 1.85, i just want to confirm is, if running a ruu on supercid 111111 will work 100% or do i have to revert to the region's cid of the ruu am using.
I dont want that ruu should get interupt by any reason nd i brick my phone coz i dont have any warranty or insurance on it.
SORRY 4 THE BAD ENGLISH, ITS NOT MY NATIVE LANGUAGE.
Sent from my AT&T HTC One X using xda app-developers app
hemsmaverick said:
Sir this is not about 2.20 or 1.85, i just want to confirm is, if running a ruu on supercid 111111 will work 100% or do i have to revert to the region's cid of the ruu am using.
I dont want that ruu should get interupt by any reason nd i brick my phone coz i dont have any warranty or insurance on it.
SORRY 4 THE BAD ENGLISH, ITS NOT MY NATIVE LANGUAGE.
Sent from my AT&T HTC One X using xda app-developers app
Click to expand...
Click to collapse
your question has been answered multiple times.
SuperCID will allow you to run the 2.20 RUU. The reason we're cautioning you is because once you do that, you will lose the ability to flash new radios at all and you'll have to flash a kernel in fast boot.
Also once you do this update to 2.20 you can't go backward to 1.85 even WITH SuperCID because the update includes a new HBOOT.
gunnyman said:
your question has been answered multiple times.
SuperCID will allow you to run the 2.20 RUU. The reason we're cautioning you is because once you do that, you will lose the ability to flash new radios at all and you'll have to flash a kernel in fast boot.
Also once you do this update to 2.20 you can't go backward to 1.85 even WITH SuperCID because the update includes a new HBOOT.
Click to expand...
Click to collapse
ok what will happen if i extract the rom.zip from the ruu and will extract and replace the hboot with earlier one and also the recovery with custom one and will rezip it and rename it as PJ83.img and will copy it to storage and run it in the current boot loader. will relock it before running the process.
Will this work and will i b able to flash the stock rom with same boot loader and custom recovery?
I AM AWARE INSTEAD OF DOING THIS I CAN JUST FLASH THE STOCK ROOTED 2.20 ROM FROM TWRP BUT I JUST WANT TO INCREASE MY TECHNICAL KNOWLEDGE AND WORK.
hemsmaverick said:
ok what will happen if i extract the rom.zip from the ruu and will extract and replace the hboot with earlier one and also the recovery with custom one and will rezip it and rename it as PJ83.img and will copy it to storage and run it in the current boot loader. will relock it before running the process.
Will this work and will i b able to flash the stock rom with same boot loader and custom recovery?
I AM AWARE INSTEAD OF DOING THIS I CAN JUST FLASH THE STOCK ROOTED 2.20 ROM FROM TWRP BUT I JUST WANT TO INCREASE MY TECHNICAL KNOWLEDGE AND WORK.
Click to expand...
Click to collapse
won't work because RUU's include a signature check and if you alter the files in any way, that signature check will fail.
gunnyman said:
won't work because ruu's include a signature check and if you alter the files in any way, that signature check will fail.
Click to expand...
Click to collapse
ok, well as per ur earlier suggestion, i have flash the radio incl ril files from at&t 1.85, asia 2.23, currently on a o2 2.29.
But signal dropping solution has not been resolved.
I have dropped the plan of running ruu and will install custom rom tn special edition 3.6
can u suggest me the best radio for better mobile signals? (i am from india -region asia)
Hi, I really f up.
I can't install roms, and I got TMOB-101.
I tried recently flash a new rom. and didn't backed it up.
please someone send me TMOB-101 backup ot RUU.
HELP!
if you've unlocked your hboot, you need to relock it and then you can install a RUU.
http://www.htconeforum.com/forum/ht...unbrick-restore-htc-one-s-stock-relocked.html
Good luck
No ruu for me there
Sent from my HTC One S using Tapatalk 2
Do you have the TMo USA?
No. I've got t-mob101 (t-mobile Germany)
Sent from my HTC One S using Tapatalk 2
try this:
http://androidfiles.org/ruu/?dir=Ville
Tried this already...
No ruu
Sent from my HTC One S using Tapatalk 2
RUU_Ville_U_TMO_DE_1.77.111.5_Radio_0.16.31501S.17_2_10.23.31501S.10L_release_259421_signed.exe
Really not?
It's a early ruu. I need the 3.16 one
Sent from my HTC One S using Tapatalk 2
lol. There isn't one from TMOB_101 and I really doubt that there ever will be one...
If you want to stick to your CID you should flash this one above and check the OTA updates. Things can be soooo easy...
If you want to go for JB you'll have to change CID to HTC__001 and flash the appropriate RUU. 3.16 will come in by OTA update.
Isn't it will brick my device? (flashing a earlier version then I got)
Sent from my HTC One S using Tapatalk 2
No, it will simply not flash (= exit with an error).
Each RUU/OTA update comes with a certain new bootloader version. Dependant on this version you can upgrade to the next higher hboot but usually not downgrade to a lower hboot. E.g. if youre on 2.15 JB you can't downgrade to 1.14 ICS by RUU anymore. But you are still able to flash custom roms based on whatever android version. The only thing here is with bootloaders > 1.09 the kernel needs to be flashed separately in fastboot mode.
That's where s-off / downgrading bootloader comes into game. As downgrading bootloader is a pain, s-off would be the way to go. For warranty purposes you will be able to restore a stock phone (locked, tampered warning removed, s-on). And if your screen is blank, it will also be blank for TMOB, so there is no need to restore stock.
Look here: http://forum.xda-developers.com/showthread.php?t=2200930
There is the "RUU_Ville_U_ICS_40_S_TMO_DE_2.38.111.10_Radio_1.09 es.50.02.07_2_10.09d.50.04L_ver2_release_287723_signed.exe"
(Android 4.04 version)
rootrider said:
No, it will simply not flash (= exit with an error).
Each RUU/OTA update comes with a certain new bootloader version. Dependant on this version you can upgrade to the next higher hboot but usually not downgrade to a lower hboot. E.g. if youre on 2.15 JB you can't downgrade to 1.14 ICS by RUU anymore. But you are still able to flash custom roms based on whatever android version. The only thing here is with bootloaders > 1.09 the kernel needs to be flashed separately in fastboot mode.
That's where s-off / downgrading bootloader comes into game. As downgrading bootloader is a pain, s-off would be the way to go. For warranty purposes you will be able to restore a stock phone (locked, tampered warning removed, s-on). And if your screen is blank, it will also be blank for TMOB, so there is no need to restore stock.
Click to expand...
Click to collapse
I've got the same Problem.
But I can't SuperCID / S-Off my Phone like here: http://forum.xda-developers.com/showthread.php?t=1671396
It just doesn't work!!!
How could I go back to a Stock ROM ??
I have really no idea
TMOB-101 ?
Which bootloader version?
rootrider said:
TMOB-101 ?
Which bootloader version?
Click to expand...
Click to collapse
hboot-2.15.0000
Golden-One said:
I've got the same Problem.
But I can't SuperCID / S-Off my Phone like here: http://forum.xda-developers.com/showthread.php?t=1671396
It just doesn't work!!!
How could I go back to a Stock ROM ??
I have really no idea
Click to expand...
Click to collapse
I can sent you a twrp nandroid backup from my phone (s4-tmobile germany)
I have backups from the 3.16.111.5.and from the latest 3.16.111.7. They are the stock roms with the supersu added.
If you recover the 3.16.111.5 nandroid backup you will take a OTA update to clean 3.16.111.7 (without supersu).
hi
Can you send me the backups too?
thank you so much!
kevin3688 said:
hi
Can you send me the backups too?
thank you so much!
Click to expand...
Click to collapse
You can find it/them here.
It's just plain stock nandroids. No root - nothing.
rootrider said:
You can find it/them here.
It's just plain stock nandroids. No root - nothing.
Click to expand...
Click to collapse
Thanks a lot!
Hi everyone.
I've been having very bad problems with by battery life lately (I mean BAD) across nearly virtually all ROMs and configurations... so I'm thinking it's time to RUU and see if it solves the problem before sending my phone off.
Currently, I'm bootloader unlocked, SuperCID, S-OFF, rooted, custom recovery, etc.
I've done an RUU before, before I got S-OFF, and I know that if you have an unlocked bootloader you have to 're-lock' it before running the RUU.
Since I'm S-OFF, are there any other prerequisites to RUUing?
Can I simply re-lock my bootloader, RUU, then unlock my bootloader, root, and I'll be good?
And will I remain S-OFF throughout the RUU? Will my S-OFF mess anything up?
Hydromea said:
Hi everyone.
I've been having very bad problems with by battery life lately (I mean BAD) across nearly virtually all ROMs and configurations... so I'm thinking it's time to RUU and see if it solves the problem before sending my phone off.
Currently, I'm bootloader unlocked, SuperCID, S-OFF, rooted, custom recovery, etc.
I've done an RUU before, before I got S-OFF, and I know that if you have an unlocked bootloader you have to 're-lock' it before running the RUU.
Since I'm S-OFF, are there any other prerequisites to RUUing?
Can I simply re-lock my bootloader, RUU, then unlock my bootloader, root, and I'll be good?
And will I remain S-OFF throughout the RUU? Will my S-OFF mess anything up?
Click to expand...
Click to collapse
From what i understand, you don't even need to relock your bootloader, while S-OFF, but I did it anyway when I RUU'd.
RUUing will not mess with S-OFF or anything.
After RUUing, I also Took the latest OTA from Telus (I'm with Telus, you may not be) And I noticed ROMs using a 3.17 base run much smoother and with less bugs. I did not, however, notice much difference in battery life with AOSP roms.
Hope this helps ya
exad said:
From what i understand, you don't even need to relock your bootloader, while S-OFF, but I did it anyway when I RUU'd.
RUUing will not mess with S-OFF or anything.
After RUUing, I also Took the latest OTA from Telus (I'm with Telus, you may not be) And I noticed ROM using a 3.17 base run much smoother and with less bugs. I did not, however, notice much difference in battery life with AOSP roms.
Hope this helps ya
Click to expand...
Click to collapse
OK, so you mean that after RUUing, you took the OTA, and Sense 3.17 ROMs ran smoother and better than before you took the OTA?
I'm thinking about using the 3.18 RUU. Since I'm S-OFF, am I safe to use any RUU I want since I can revert easily?
As in, I can safely use the 3.18 RUU (which is currently regarded unrootable), and if it turns out to be bad I can just go back to an older RUU?
Basically, will using the 3.18 OTA/RUU mess anything up if I'm S-OFF?
Hydromea said:
OK, so you mean that after RUUing, you took the OTA, and Sense 3.17 ROMs ran smoother and better than before you took the OTA?
I'm thinking about using the 3.18 RUU. Since I'm S-OFF, am I safe to use any RUU I want since I can revert easily?
As in, I can safely use the 3.18 RUU (which is currently regarded unrootable), and if it turns out to be bad I can just go back to an older RUU?
Basically, will using the 3.18 OTA/RUU mess anything up if I'm S-OFF?
Click to expand...
Click to collapse
Yes, I did find Viper and clean rom both ran much better than they did previously.
I'm sorry, I don't know about the 3.18 OTA... Hopefully someone else here can shed more light?
Theoretically, Since you're S-OFF, you should be able to update just fine. I haven't seen anyone actually do it yet though. I would test if I could.
I didn't relock I just ruu'd and after the process was done I just pushed twrp to my phone in fastboot and flashed viper. Only took a few mins top
Sent from my Elemental Venomized S-off HTC One XL
If I decide to update to a complete 3.18 base, is it better to use a 3.18 RUU or OTA? And if I use the OTA, how exactly do I 'flash' it (it's a ZIP file). Do I just put it on the top level of my internal storage, and boot into recovery, and select 'update' or whatever?
Hydromea said:
If I decide to update to a complete 3.18 base, is it better to use a 3.18 RUU or OTA? And if I use the OTA, how exactly do I 'flash' it (it's a ZIP file). Do I just put it on the top level of my internal storage, and boot into recovery, and select 'update' or whatever?
Click to expand...
Click to collapse
I used the ruu for 3.18 and haven't regretted it yet. My battery life has gotten much better.
Sent from my Elemental Venomized S-off HTC One XL
OTA just downloads through the phone. IE: Go to settings about phone, check for updates and it updates. You don't have to do anything else, it prompts you and updates for you.
If there was already a 3.18 RUU that would be the fastest way. Telus is slow with releasing RUU's so I had to use ICS myself. Neither way should give you trouble.
Here's to hoping my phone doesn't brick. Running the RUU as we speak (bootloader unlocked, s-off, super-cid)...
Well it worked. Twrp 2.2.2.0 doesn't though. Ugh, 2.3x is so ugly.
Sent from my HTC One X
ECEXCURSION said:
Well it worked. Twrp 2.2.2.0 doesn't though. Ugh, 2.3x is so ugly.
Sent from my HTC One X
Click to expand...
Click to collapse
Did you use the 3.18 RUU?
ECEXCURSION said:
Well it worked. Twrp 2.2.2.0 doesn't though. Ugh, 2.3x is so ugly.
Sent from my HTC One X
Click to expand...
Click to collapse
If you're hellbent on TWRP 2.2.2.0, downgrade the touchscreen firmware.
Hydromea said:
Did you use the 3.18 RUU?
Click to expand...
Click to collapse
Yeah I did. Maybe I'll look into downgrading the touchscreen firmware.
Sent from my HTC One X
If I'm S-OFF and use the 3.18 RUU, in order to use AOSP-based 4.2.2 ROMs, will I have to downgrade my touchscreen firmware?
Hydromea said:
If I'm S-OFF and use the 3.18 RUU, in order to use AOSP-based 4.2.2 ROMs, will I have to downgrade my touchscreen firmware?
Click to expand...
Click to collapse
yes you will here is how
http://forum.xda-developers.com/showthread.php?t=2159863
If I use the 3.18 RUU, how will I obtain root afterwards?
I'm already S-OFF and bootloader unlocked BTW.
And since I'm S-OFF, can I easily revert back to an older RUU without any extra steps?
Hydromea said:
If I use the 3.18 RUU, how will I obtain root afterwards?
I'm already S-OFF and bootloader unlocked BTW.
And since I'm S-OFF, can I easily revert back to an older RUU without any extra steps?
Click to expand...
Click to collapse
after ruu just fastboot flash a recovery transfer a rooted rom to your phone and flash in recovery
and with s-off you can run any ruu dont even need to relock bootloader
jerrycoffman45 said:
after ruu just fastboot flash a recovery transfer a rooted rom to your phone and flash in recovery
and with s-off you can run any ruu dont even need to relock bootloader
Click to expand...
Click to collapse
What he said lol
Sent from my Elemental Venomized S-off HTC One XL
this is all great info i would like to thank all of you
does this go for the rogers model as well?
babarnard said:
this is all great info i would like to thank all of you
does this go for the rogers model as well?
Click to expand...
Click to collapse
Yes.
Just an update. I successfully ruu'd to 3.18, downgraded hboot to 1.09, downgraded the touchscreen firmware, installed twrp 2.2.2.0 and all is well.
I'm sort of back where I started but maybe something good has come of it.
Sent from my HTC One X