Hi everyone.
I've been having very bad problems with by battery life lately (I mean BAD) across nearly virtually all ROMs and configurations... so I'm thinking it's time to RUU and see if it solves the problem before sending my phone off.
Currently, I'm bootloader unlocked, SuperCID, S-OFF, rooted, custom recovery, etc.
I've done an RUU before, before I got S-OFF, and I know that if you have an unlocked bootloader you have to 're-lock' it before running the RUU.
Since I'm S-OFF, are there any other prerequisites to RUUing?
Can I simply re-lock my bootloader, RUU, then unlock my bootloader, root, and I'll be good?
And will I remain S-OFF throughout the RUU? Will my S-OFF mess anything up?
Hydromea said:
Hi everyone.
I've been having very bad problems with by battery life lately (I mean BAD) across nearly virtually all ROMs and configurations... so I'm thinking it's time to RUU and see if it solves the problem before sending my phone off.
Currently, I'm bootloader unlocked, SuperCID, S-OFF, rooted, custom recovery, etc.
I've done an RUU before, before I got S-OFF, and I know that if you have an unlocked bootloader you have to 're-lock' it before running the RUU.
Since I'm S-OFF, are there any other prerequisites to RUUing?
Can I simply re-lock my bootloader, RUU, then unlock my bootloader, root, and I'll be good?
And will I remain S-OFF throughout the RUU? Will my S-OFF mess anything up?
Click to expand...
Click to collapse
From what i understand, you don't even need to relock your bootloader, while S-OFF, but I did it anyway when I RUU'd.
RUUing will not mess with S-OFF or anything.
After RUUing, I also Took the latest OTA from Telus (I'm with Telus, you may not be) And I noticed ROMs using a 3.17 base run much smoother and with less bugs. I did not, however, notice much difference in battery life with AOSP roms.
Hope this helps ya
exad said:
From what i understand, you don't even need to relock your bootloader, while S-OFF, but I did it anyway when I RUU'd.
RUUing will not mess with S-OFF or anything.
After RUUing, I also Took the latest OTA from Telus (I'm with Telus, you may not be) And I noticed ROM using a 3.17 base run much smoother and with less bugs. I did not, however, notice much difference in battery life with AOSP roms.
Hope this helps ya
Click to expand...
Click to collapse
OK, so you mean that after RUUing, you took the OTA, and Sense 3.17 ROMs ran smoother and better than before you took the OTA?
I'm thinking about using the 3.18 RUU. Since I'm S-OFF, am I safe to use any RUU I want since I can revert easily?
As in, I can safely use the 3.18 RUU (which is currently regarded unrootable), and if it turns out to be bad I can just go back to an older RUU?
Basically, will using the 3.18 OTA/RUU mess anything up if I'm S-OFF?
Hydromea said:
OK, so you mean that after RUUing, you took the OTA, and Sense 3.17 ROMs ran smoother and better than before you took the OTA?
I'm thinking about using the 3.18 RUU. Since I'm S-OFF, am I safe to use any RUU I want since I can revert easily?
As in, I can safely use the 3.18 RUU (which is currently regarded unrootable), and if it turns out to be bad I can just go back to an older RUU?
Basically, will using the 3.18 OTA/RUU mess anything up if I'm S-OFF?
Click to expand...
Click to collapse
Yes, I did find Viper and clean rom both ran much better than they did previously.
I'm sorry, I don't know about the 3.18 OTA... Hopefully someone else here can shed more light?
Theoretically, Since you're S-OFF, you should be able to update just fine. I haven't seen anyone actually do it yet though. I would test if I could.
I didn't relock I just ruu'd and after the process was done I just pushed twrp to my phone in fastboot and flashed viper. Only took a few mins top
Sent from my Elemental Venomized S-off HTC One XL
If I decide to update to a complete 3.18 base, is it better to use a 3.18 RUU or OTA? And if I use the OTA, how exactly do I 'flash' it (it's a ZIP file). Do I just put it on the top level of my internal storage, and boot into recovery, and select 'update' or whatever?
Hydromea said:
If I decide to update to a complete 3.18 base, is it better to use a 3.18 RUU or OTA? And if I use the OTA, how exactly do I 'flash' it (it's a ZIP file). Do I just put it on the top level of my internal storage, and boot into recovery, and select 'update' or whatever?
Click to expand...
Click to collapse
I used the ruu for 3.18 and haven't regretted it yet. My battery life has gotten much better.
Sent from my Elemental Venomized S-off HTC One XL
OTA just downloads through the phone. IE: Go to settings about phone, check for updates and it updates. You don't have to do anything else, it prompts you and updates for you.
If there was already a 3.18 RUU that would be the fastest way. Telus is slow with releasing RUU's so I had to use ICS myself. Neither way should give you trouble.
Here's to hoping my phone doesn't brick. Running the RUU as we speak (bootloader unlocked, s-off, super-cid)...
Well it worked. Twrp 2.2.2.0 doesn't though. Ugh, 2.3x is so ugly.
Sent from my HTC One X
ECEXCURSION said:
Well it worked. Twrp 2.2.2.0 doesn't though. Ugh, 2.3x is so ugly.
Sent from my HTC One X
Click to expand...
Click to collapse
Did you use the 3.18 RUU?
ECEXCURSION said:
Well it worked. Twrp 2.2.2.0 doesn't though. Ugh, 2.3x is so ugly.
Sent from my HTC One X
Click to expand...
Click to collapse
If you're hellbent on TWRP 2.2.2.0, downgrade the touchscreen firmware.
Hydromea said:
Did you use the 3.18 RUU?
Click to expand...
Click to collapse
Yeah I did. Maybe I'll look into downgrading the touchscreen firmware.
Sent from my HTC One X
If I'm S-OFF and use the 3.18 RUU, in order to use AOSP-based 4.2.2 ROMs, will I have to downgrade my touchscreen firmware?
Hydromea said:
If I'm S-OFF and use the 3.18 RUU, in order to use AOSP-based 4.2.2 ROMs, will I have to downgrade my touchscreen firmware?
Click to expand...
Click to collapse
yes you will here is how
http://forum.xda-developers.com/showthread.php?t=2159863
If I use the 3.18 RUU, how will I obtain root afterwards?
I'm already S-OFF and bootloader unlocked BTW.
And since I'm S-OFF, can I easily revert back to an older RUU without any extra steps?
Hydromea said:
If I use the 3.18 RUU, how will I obtain root afterwards?
I'm already S-OFF and bootloader unlocked BTW.
And since I'm S-OFF, can I easily revert back to an older RUU without any extra steps?
Click to expand...
Click to collapse
after ruu just fastboot flash a recovery transfer a rooted rom to your phone and flash in recovery
and with s-off you can run any ruu dont even need to relock bootloader
jerrycoffman45 said:
after ruu just fastboot flash a recovery transfer a rooted rom to your phone and flash in recovery
and with s-off you can run any ruu dont even need to relock bootloader
Click to expand...
Click to collapse
What he said lol
Sent from my Elemental Venomized S-off HTC One XL
this is all great info i would like to thank all of you
does this go for the rogers model as well?
babarnard said:
this is all great info i would like to thank all of you
does this go for the rogers model as well?
Click to expand...
Click to collapse
Yes.
Just an update. I successfully ruu'd to 3.18, downgraded hboot to 1.09, downgraded the touchscreen firmware, installed twrp 2.2.2.0 and all is well.
I'm sort of back where I started but maybe something good has come of it.
Sent from my HTC One X
Related
Will at&t ruu 2.20.502.7 will work on supercid 1111111 at&t hox to get back to stock?
I am having at&t htc one x bootloader with :
**** tampered ****
**** unlocked ****
evita pvt shp s-on rl
hboot-1.09.0000
radio-0.19as.32.09.09_l
opendsp-v28.1.0.32.0504
emmc-boot
apr 2 2012,21:08:24
installed twrp 2.2.0 recovery and stock rooted rom 2.23707.2 asia generic.
Now the problem is, i am facing the mobile signal(not wifi) dropping issues and i have to revert back to at&t stock rom, i have downloaded the official at&t ruu 2.20.502.2.....exe,
but i am concerned with the doubt that will the ruu will work 100% on supercid 111111 without any problem after relocking the bootloder or do i have to revert back the stock at&t cid, and if yes then what is the procedure to revert back the stock at&t cid???????
If you ever want to unlock the bootloader again leave the cid alone. BTW you can just flash the radio from the new ota if you want. There's a thread in development section with radios
gunnyman said:
If you ever want to unlock the bootloader again leave the cid alone. BTW you can just flash the radio from the new ota if you want. There's a thread in development section with radios
Click to expand...
Click to collapse
thanks for the help,appreciable. But i don't want to flash just the radio, coz i already did that, but it did not solve my problem. So the question still continues..Can i run Ruu with the current supercid 111111 or do i have to revert it back to stock???
SORRY FOR BAD ENGLISH. ITS NOT MY FAMILIAR LANGUAGE.
You don't have to change cid to flash the ruu just relock the bootloader
gunnyman said:
you don't have to change cid to flash the ruu just relock the bootloader
Click to expand...
Click to collapse
thanks for the help,
Are you already on 2.20? If not, why not run 1.85 RUU?
thedauntlessone said:
Are you already on 2.20? If not, why not run 1.85 RUU?
Click to expand...
Click to collapse
good question.
thedauntlessone said:
Are you already on 2.20? If not, why not run 1.85 RUU?
Click to expand...
Click to collapse
Doesn't look like the op is on 2.20, the hboot for 2.20 is 1.14.0002.
Absolutely Right, i am not on 2.20,
Sent from my HTC One XL using xda app-developers app
Sir this is not about 2.20 or 1.85, i just want to confirm is, if running a ruu on supercid 111111 will work 100% or do i have to revert to the region's cid of the ruu am using.
I dont want that ruu should get interupt by any reason nd i brick my phone coz i dont have any warranty or insurance on it.
SORRY 4 THE BAD ENGLISH, ITS NOT MY NATIVE LANGUAGE.
Sent from my AT&T HTC One X using xda app-developers app
hemsmaverick said:
Sir this is not about 2.20 or 1.85, i just want to confirm is, if running a ruu on supercid 111111 will work 100% or do i have to revert to the region's cid of the ruu am using.
I dont want that ruu should get interupt by any reason nd i brick my phone coz i dont have any warranty or insurance on it.
SORRY 4 THE BAD ENGLISH, ITS NOT MY NATIVE LANGUAGE.
Sent from my AT&T HTC One X using xda app-developers app
Click to expand...
Click to collapse
your question has been answered multiple times.
SuperCID will allow you to run the 2.20 RUU. The reason we're cautioning you is because once you do that, you will lose the ability to flash new radios at all and you'll have to flash a kernel in fast boot.
Also once you do this update to 2.20 you can't go backward to 1.85 even WITH SuperCID because the update includes a new HBOOT.
gunnyman said:
your question has been answered multiple times.
SuperCID will allow you to run the 2.20 RUU. The reason we're cautioning you is because once you do that, you will lose the ability to flash new radios at all and you'll have to flash a kernel in fast boot.
Also once you do this update to 2.20 you can't go backward to 1.85 even WITH SuperCID because the update includes a new HBOOT.
Click to expand...
Click to collapse
ok what will happen if i extract the rom.zip from the ruu and will extract and replace the hboot with earlier one and also the recovery with custom one and will rezip it and rename it as PJ83.img and will copy it to storage and run it in the current boot loader. will relock it before running the process.
Will this work and will i b able to flash the stock rom with same boot loader and custom recovery?
I AM AWARE INSTEAD OF DOING THIS I CAN JUST FLASH THE STOCK ROOTED 2.20 ROM FROM TWRP BUT I JUST WANT TO INCREASE MY TECHNICAL KNOWLEDGE AND WORK.
hemsmaverick said:
ok what will happen if i extract the rom.zip from the ruu and will extract and replace the hboot with earlier one and also the recovery with custom one and will rezip it and rename it as PJ83.img and will copy it to storage and run it in the current boot loader. will relock it before running the process.
Will this work and will i b able to flash the stock rom with same boot loader and custom recovery?
I AM AWARE INSTEAD OF DOING THIS I CAN JUST FLASH THE STOCK ROOTED 2.20 ROM FROM TWRP BUT I JUST WANT TO INCREASE MY TECHNICAL KNOWLEDGE AND WORK.
Click to expand...
Click to collapse
won't work because RUU's include a signature check and if you alter the files in any way, that signature check will fail.
gunnyman said:
won't work because ruu's include a signature check and if you alter the files in any way, that signature check will fail.
Click to expand...
Click to collapse
ok, well as per ur earlier suggestion, i have flash the radio incl ril files from at&t 1.85, asia 2.23, currently on a o2 2.29.
But signal dropping solution has not been resolved.
I have dropped the plan of running ruu and will install custom rom tn special edition 3.6
can u suggest me the best radio for better mobile signals? (i am from india -region asia)
Hi, I really f up.
I can't install roms, and I got TMOB-101.
I tried recently flash a new rom. and didn't backed it up.
please someone send me TMOB-101 backup ot RUU.
HELP!
if you've unlocked your hboot, you need to relock it and then you can install a RUU.
http://www.htconeforum.com/forum/ht...unbrick-restore-htc-one-s-stock-relocked.html
Good luck
No ruu for me there
Sent from my HTC One S using Tapatalk 2
Do you have the TMo USA?
No. I've got t-mob101 (t-mobile Germany)
Sent from my HTC One S using Tapatalk 2
try this:
http://androidfiles.org/ruu/?dir=Ville
Tried this already...
No ruu
Sent from my HTC One S using Tapatalk 2
RUU_Ville_U_TMO_DE_1.77.111.5_Radio_0.16.31501S.17_2_10.23.31501S.10L_release_259421_signed.exe
Really not?
It's a early ruu. I need the 3.16 one
Sent from my HTC One S using Tapatalk 2
lol. There isn't one from TMOB_101 and I really doubt that there ever will be one...
If you want to stick to your CID you should flash this one above and check the OTA updates. Things can be soooo easy...
If you want to go for JB you'll have to change CID to HTC__001 and flash the appropriate RUU. 3.16 will come in by OTA update.
Isn't it will brick my device? (flashing a earlier version then I got)
Sent from my HTC One S using Tapatalk 2
No, it will simply not flash (= exit with an error).
Each RUU/OTA update comes with a certain new bootloader version. Dependant on this version you can upgrade to the next higher hboot but usually not downgrade to a lower hboot. E.g. if youre on 2.15 JB you can't downgrade to 1.14 ICS by RUU anymore. But you are still able to flash custom roms based on whatever android version. The only thing here is with bootloaders > 1.09 the kernel needs to be flashed separately in fastboot mode.
That's where s-off / downgrading bootloader comes into game. As downgrading bootloader is a pain, s-off would be the way to go. For warranty purposes you will be able to restore a stock phone (locked, tampered warning removed, s-on). And if your screen is blank, it will also be blank for TMOB, so there is no need to restore stock.
Look here: http://forum.xda-developers.com/showthread.php?t=2200930
There is the "RUU_Ville_U_ICS_40_S_TMO_DE_2.38.111.10_Radio_1.09 es.50.02.07_2_10.09d.50.04L_ver2_release_287723_signed.exe"
(Android 4.04 version)
rootrider said:
No, it will simply not flash (= exit with an error).
Each RUU/OTA update comes with a certain new bootloader version. Dependant on this version you can upgrade to the next higher hboot but usually not downgrade to a lower hboot. E.g. if youre on 2.15 JB you can't downgrade to 1.14 ICS by RUU anymore. But you are still able to flash custom roms based on whatever android version. The only thing here is with bootloaders > 1.09 the kernel needs to be flashed separately in fastboot mode.
That's where s-off / downgrading bootloader comes into game. As downgrading bootloader is a pain, s-off would be the way to go. For warranty purposes you will be able to restore a stock phone (locked, tampered warning removed, s-on). And if your screen is blank, it will also be blank for TMOB, so there is no need to restore stock.
Click to expand...
Click to collapse
I've got the same Problem.
But I can't SuperCID / S-Off my Phone like here: http://forum.xda-developers.com/showthread.php?t=1671396
It just doesn't work!!!
How could I go back to a Stock ROM ??
I have really no idea
TMOB-101 ?
Which bootloader version?
rootrider said:
TMOB-101 ?
Which bootloader version?
Click to expand...
Click to collapse
hboot-2.15.0000
Golden-One said:
I've got the same Problem.
But I can't SuperCID / S-Off my Phone like here: http://forum.xda-developers.com/showthread.php?t=1671396
It just doesn't work!!!
How could I go back to a Stock ROM ??
I have really no idea
Click to expand...
Click to collapse
I can sent you a twrp nandroid backup from my phone (s4-tmobile germany)
I have backups from the 3.16.111.5.and from the latest 3.16.111.7. They are the stock roms with the supersu added.
If you recover the 3.16.111.5 nandroid backup you will take a OTA update to clean 3.16.111.7 (without supersu).
hi
Can you send me the backups too?
thank you so much!
kevin3688 said:
hi
Can you send me the backups too?
thank you so much!
Click to expand...
Click to collapse
You can find it/them here.
It's just plain stock nandroids. No root - nothing.
rootrider said:
You can find it/them here.
It's just plain stock nandroids. No root - nothing.
Click to expand...
Click to collapse
Thanks a lot!
So, I'm currently S-OFF, bootloader unlocked, SuperCID, etc. I was originally on the 1.73 base/RUU, and then upgraded using the 3.18 RUU. I would like to revert back to the 1.73 RUU. Since I'm S-OFF, can I simply run the 1.73 RUU (the older version) without doing anything fancy? I just plug my phone up and run the 1.73 RUU, even though it's a MUCH older RUU than the one I last used?
Thanks.
Yes.
Though I did not have supercid when I did it. You should be able to with s-off no problem.
If you're worried just fastboot OEM writecid "whatever your cid was originally" minus the ""
Sent from my One X using xda app-developers app
exad said:
Yes.
Though I did not have supercid when I did it. You should be able to with s-off no problem.
If you're worried just fastboot OEM writecid "whatever your cid was originally" minus the ""
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
Ok, and do I need to relock my bootloader before running the RUU if I'm S-OFF?
No, don't
Sent from my One X using xda app-developers app
i have s-off with 3.18 firmwares on it running custom aosp roms. i find the 3.18 radio to be the best for at&t. since i have ruu i haven't reverted hboot or anything besides downgrading the touchscreen. if you run aosp roms i would flash the cm10 3.18 cwm flashable zip, since most use the older 2.20 radio.
DvineLord said:
i have s-off with 3.18 firmwares on it running custom aosp roms. i find the 3.18 radio to be the best for at&t. since i have ruu i haven't reverted hboot or anything besides downgrading the touchscreen. if you run aosp roms i would flash the cm10 3.18 cwm flashable zip, since most use the older 2.20 radio.
Click to expand...
Click to collapse
I also have S-OFF , unlocked and go back and forth between the 3.18 and older RUU's , then flash radios that suit my area. At the time on 2.20, Clean Rom 5.1, with 3.18 radio. As I understand most posts on the deal, once S-OFF , you can do most anything as long as its a RUU for the particular phone , in this case the HTC one x Evita.
Hi, I have a HTC ONE XL for AT&T with S-OFF and unlocked bootloader. I have the nocturnal ROM based on ICS. Also HBOOT 1.01.0000.
I want to install a rom based on JB (This particular CleanROM 6.5 - ★ | Jellybean 4.1.1! |).
My question is with this hboot, can i flash a jb rom from ICS? Because I'm not sure if flash from recovery the zip of this rom bricked me.
It won't brick you. I'm not sure if you'll experience issues using such an old firmware with a ROM based on the latest softwate
Sent from my One X using xda app-developers app
Thanks. Is there any way to update the software?
Rafanjani said:
Thanks. Is there any way to update the software?
Click to expand...
Click to collapse
Yes install the Ruu, then push twrp, then install CR. This will give you the latest firmware. CR by itself does not so it, and some gave experienced random reboots with older wifi firmware. Just be aware that a small subset of HOXL phones do not work well with Maps/nav under JB
between ynelsol
GroovyGeek said:
Yes install the Ruu, then push twrp, then install CR. This will give you the latest firmware. CR by itself does not so it, and some gave experienced random reboots with older wifi firmware. Just be aware that a small subset of HOXL phones do not work well with Maps/nav under JB
Click to expand...
Click to collapse
thanks for reply! I did brick my phone when i try to install an official ruu 2 months ago, but i did fix this ($$$$). The problem is that I can not install because I have CID 111111 and CR root, bootloader unlocked etc
With s-off you won't brick running an ruu. Though my phone will no longer ruu properly but that's another story. I may post a thread about it in case others experience it so they know how to recover.
Sent from my HTC One X using xda app-developers app
exad said:
Though my phone will no longer ruu properly but that's another story. I may post a thread about it in case others experience it so they know how to recover.
Click to expand...
Click to collapse
I'm curious about this. What happened?
Sent from my HTC One
ECEXCURSION said:
I'm curious about this. What happened?
Sent from my HTC One
Click to expand...
Click to collapse
Something went wrong while RUUing and my hboot partition cannot be written over without clearing the cache first. So the RUU will get to the end and then fail. Everything flashed except the hboot. It's kind of funny because it looks like a brick when it happens but it remains in RUU mode so I can just fastboot flash the hboot seperately after and everything works but RUUs will no longer complete successfully Always half bricks.
How did it happen? Well I think it's because I was RUUing in a VM as I was running linux exclusively at the time. But during RUU the phone looses connection and I have to manually reconnect to my phone and I didn't realize so it interrupted the RUU. I'm just lucky I didn't end up with a full brick! ^_^
exad said:
Something went wrong while RUUing and my hboot partition cannot be written over without clearing the cache first. So the RUU will get to the end and then fail. Everything flashed except the hboot. It's kind of funny because it looks like a brick when it happens but it remains in RUU mode so I can just fastboot flash the hboot seperately after and everything works but RUUs will no longer complete successfully Always half bricks.
How did it happen? Well I think it's because I was RUUing in a VM as I was running linux exclusively at the time. But during RUU the phone looses connection and I have to manually reconnect to my phone and I didn't realize so it interrupted the RUU. I'm just lucky I didn't end up with a full brick! ^_^
Click to expand...
Click to collapse
how i can flash hboot using fastboot? I wish to have jb
Rafanjani said:
how i can flash hboot using fastboot? I wish to have jb
Click to expand...
Click to collapse
flashing hboot with fastboot won't give you JB......
Is your phone S-ON or S-OFF?
SuperCID? Yes or no?
Bootloader locked or unlocked?
exad said:
flashing hboot with fastboot won't give you JB......
Is your phone S-ON or S-OFF?
SuperCID? Yes or no?
Bootloader locked or unlocked?
Click to expand...
Click to collapse
I know! but it's the first step to upgrade to jb
Rafanjani said:
I know! but it's the first step to upgrade to jb
Click to expand...
Click to collapse
No it isn't
*** WHAT MY PROBLEM IS***
PLEASE can someone confirm any AOSP ROM that works with 2.15 HBOOT?
***WHAT I KNOW***
( i know the CM 10.2 thread says that RUU 3.18 which will make the hboot 2.14 but since 2.15 is latest i assume it should support)
(i also know that [HBOOT 2.15 is essential for SENSE 5 4.2.2 to run,i believe that's the only reason people go for 2.15)
***WHAT I HAVE TRIED***
NOW from what i have tried is that the 1st stable cm 10 release doesn't work with 2.15 (obviously too old build) my screen also became responsive(i believe that because of touch panel firmware) then with the latest stable release of cm 10.1 it specified that it needs hboot 2.14 and hence couldn't flash.
with PAC 4.3 it does gets installed but screen is unresponsive and infinite bootloops!:silly:
***WILL THIS WORK***
so now if i RUU 3.18 i will have to unlock boot loader and root it (M SOFF SUPER CID) which i m not really ready to do!
now there are methods that can help u downgrade/upgrade your firmware , can i do that?
also will using torched kernel help in me in any way?
***WHY DO I WANT AOSP***
Viper XL 4.2.2 best ROM ever hats off but the thing is i dont know why but i have Signal issues i tried flashing the recommended RADIO version.
since the vendor had already RUUd my device that was meant from some ASIAN region and already came with SENSE 5 and i dint mess up with it in any way still i had signal issues (which are unpredictable) i found by GSAM BATTERY monitor that around 30 to 40% of my battery is consumed by RADIO.
also the best signal is around -81db
i also had some issues with camera!
and then there is the numerous options i can have with AOSP.
****LASTLY CAN ANYONE HELP****
:angel:
Just RUU. Your bootloader will remain unlocked and your S-OFF will remain
After the RUU you can flash recovery and flash a rom. You can technically just flash the 2.14 firmware.zip by extracting it from an OTA or an RUU, but easier to just ruu. and you get a nice clean wipe too.
I misread the m soff part sorry. You could have just run the ruu and twrp and been done in the time it took you to write that post.
Sent from my HTC One XL
954wrecker said:
He makes it hard to understand but he is S-ON so he is screwed at this point
Sent from my HTC One XL
Click to expand...
Click to collapse
no no no i am SOFF i know for sure!!!
exad said:
Just RUU. Your bootloader will remain unlocked and your S-OFF will remain
After the RUU you can flash recovery and flash a rom. You can technically just flash the 2.14 firmware.zip by extracting it from an OTA or an RUU, but easier to just ruu. and you get a nice clean wipe too.
Click to expand...
Click to collapse
jus for the sake for reassurance:
after RUU:
will Bootloader remain Unlocked?
will it still be SOFF?
and SUPERCID?
so these things will survive the RUU?
954wrecker said:
I misread the m soff part sorry. You could have just run the ruu and twrp and been done in the time it took you to write that post.
Sent from my HTC One XL
Click to expand...
Click to collapse
LOL u are right thanks!
its just that m kinda paranoid cause every day in the Help and Troubleshooting section there is some thread dats says BRICKED so always to be on the safer side!
Sonone said:
jus for the sake for reassurance:
after RUU:
will Bootloader remain Unlocked?
will it still be SOFF?
and SUPERCID?
so these things will survive the RUU?
Click to expand...
Click to collapse
yes
exad said:
yes
Click to expand...
Click to collapse
thanks a lot EXAD!!!:good::good:
btw earlier you mentione its possible to extract the firmware file?
how can it be done?
Sonone said:
thanks a lot EXAD!!!:good::good:
btw earlier you mentione its possible to extract the firmware file?
how can it be done?
Click to expand...
Click to collapse
the easiest way is to extract firmware.zip from a 3.17/3.18 ota file for your carrier.
exad said:
the easiest way is to extract firmware.zip from a 3.17/3.18 ota file for your carrier.
Click to expand...
Click to collapse
I wouldn't mess with extracting the firmware files from the OTAs manually. If one of the hboot modules is missing, a brick can result. The OP is probably OK, since he has already manually updated to hboot 2.15. But RUU is still seems the safest way.
redpoint73 said:
I wouldn't mess with extracting the firmware files from the OTAs manually. If one of the hboot modules is missing, a brick can result. The OP is probably OK, since he has already manually updated to hboot 2.15. But RUU is still seems the safest way.
Click to expand...
Click to collapse
as always thank you...
since u recoomend thats the safest way i will try out that.
have to download the RUU 3.18!!!
*waiting*