Database Info

[Q] Help! Xrecovery menu Xperia x10

i just cant get into the recovery menu. what am i doing wrong?
I just bought my x10i firmware 2.1-update1
2.0.A.0.504.
i Rooted my phone using the new superoneclick.
installed busybox succesfully
installed xrecovery succesfully.
tried 100 times pressinf the back button 3 times on the SE LOGO.
But it freezes on the logo screen or it just boots up the phone.
I even tried the method to install the 3 files into the bin file.
But after this its the same,
sorry for my english and hope you guys understand.
Please help me!

I have the same problem!
I would also like to know.

me 3 ??, I am having the same issue too.

Hey, I got it to work using this method! try it out guys.
http://forum.xda-developers.com/showthread.php?t=888250
Do you guys know if i need to reinstall xrecovery everytime i flash?

Ray_jai said:
Hey, I got it to work using this method! try it out guys.
http://forum.xda-developers.com/showthread.php?t=888250
Do you guys know if i need to reinstall xrecovery everytime i flash?
Click to expand...
Click to collapse
totally ****er bull****.
The 1 u posted is X10 mini. I din c before i run it. Now my hp cant boot up anymore.

What do you mean HP?
the title says X10? Why would you try it on a HP?

Geeks, please help us
Same prob
Now we know for sure, that xRecovery is dangerous if we don't know how to handle it

i havent met any problem entering the xrecovery menu even when i first installed it even though i was a complete noob on android (now i am just noob)
only thing i was doing is that i never pressed the back button only 3 times, i always keep pressing it until i get the xrecovery menu

Yes, keep pressing the back button until you enter the XRecovery menu.
If it still fails then I would revert my phone to the STOCK SE ROM (basically means repairing your phone using Sony Ericsson's PC Companion or Update Service utility), and then use FlashTool to root the device and install Busy Box and XRecovery.
FlashTool is basically an all in one solution and is less painful to use for beginners. Just do a search for it in the XDA forums.
Hope this helps.

[Q] NEED HELP WITH XPERIA X10 keeps rebooting!

Hey guys i had my phone rooted and with xRecovery and all of the good stuff and with like wolfpacks old Rom, I wanted to reformat my phone and make it clean again with at&t 2.1 firmware after i tried doing it on PC companion... it keep rebooting and rebooting and at first i though it was just installing the update, but now it is just rebooting when the logo pops up it restarts again need help! any ideas?

i think u can go for flashtool easy to find in this forum .daownload it together with the rom + baseband if needed.intruction is all in this forum

[Q] Help phone bricked after CM7 rom install..

Here's what happened-
I downloaded a new ROM for my x10 mini pro and i did a factory restore via CWM then i selected install zip for SD card and selected MINICM7 2.1.6 after that the installation began. I did not flash my phone. after that i got a message. Kernel nAa something like that not found and it proceeded with installation.
Then when my phone restarted It got stuck at the SE logo. I cannot get into CWM menu. or do a reset(Power + home). Then Connected my phone to my PC over the USB. it showed a unmounted drive and told me to mount it via the phone. But, I cannot do so as I can do absolutely nothing with the phone. I pulled off the battery and then connected it while pressing the back key a greed light lit up. And my phone said -"Connected to Sony ericsson phone" (without showing the model). Soon the green light disappeared by itself and my PC connection broke too. I tried several times but the same thing happened. I tired looking for SEUS for x10 mini pro- But. the SE site told me that the software wasn't available for my phone . PLZ I really need your experience and help. PLZ help. I greatly appreciate it.

shane007 said:
Here's what happened-
I downloaded a new ROM for my x10 mini pro and i did a factory restore via CWM then i selected install zip for SD card and selected MINICM7 2.1.6 after that the installation began. I did not flash my phone. after that i got a message. Kernel nAa something like that not found and it proceeded with installation.
Then when my phone restarted It got stuck at the SE logo. I cannot get into CWM menu. or do a reset(Power + home). Then Connected my phone to my PC over the USB. it showed a unmounted drive and told me to mount it via the phone. But, I cannot do so as I can do absolutely nothing with the phone. I pulled off the battery and then connected it while pressing the back key a greed light lit up. And my phone said -"Connected to Sony ericsson phone" (without showing the model). Soon the green light disappeared by itself and my PC connection broke too. I tried several times but the same thing happened. I tired looking for SEUS for x10 mini pro- But. the SE site told me that the software wasn't available for my phone . PLZ I really need your experience and help. PLZ help. I greatly appreciate it.
Click to expand...
Click to collapse
looks like you got into a bit of trouble can you get into recovery or anything

try accessing your phone through abd maybe that would help

further help
shane007 said:
Here's what happened-
I downloaded a new ROM for my x10 mini pro and i did a factory restore via CWM then i selected install zip for SD card and selected MINICM7 2.1.6 after that the installation began. I did not flash my phone. after that i got a message. Kernel nAa something like that not found and it proceeded with installation.
Then when my phone restarted It got stuck at the SE logo. I cannot get into CWM menu. or do a reset(Power + home). Then Connected my phone to my PC over the USB. it showed a unmounted drive and told me to mount it via the phone. But, I cannot do so as I can do absolutely nothing with the phone. I pulled off the battery and then connected it while pressing the back key a greed light lit up. And my phone said -"Connected to Sony ericsson phone" (without showing the model). Soon the green light disappeared by itself and my PC connection broke too. I tried several times but the same thing happened. I tired looking for SEUS for x10 mini pro- But. the SE site told me that the software wasn't available for my phone . PLZ I really need your experience and help. PLZ help. I greatly appreciate it.
Click to expand...
Click to collapse
alexyaz said:
try accessing your phone through abd maybe that would help
Click to expand...
Click to collapse
I am a new user and can't post links but Google what alexyaz said to help guide you through, search something like hot to access abd to install ROM. also if you need your original software Google search the model of your phone with stock ROM.
Once you fix it due try to read all directions a few times when implementing a new ROM to make sure you don't get any unneeded errors

[Q] phone displays sony logo then nothing

after trying to rom my sony ericson xperia neo v to have jellybean on my device
i got the error message status 7 so i choose the "repeat system now" option
but something went wrong (i did format system and format data not just wipe)
now my phone only displays sony logo then nothing happens
now i cannot enter recovery mode and cannot open my phone with its ics os
just sony logo
what can i di?
sorry for bad english

Unable to istall Custom ROMS
m.gawady said:
after trying to rom my sony ericson xperia neo v to have jellybean on my device
i got the error message status 7 so i choose the "repeat system now" option
but something went wrong (i did format system and format data not just wipe)
now my phone only displays sony logo then nothing happens
now i cannot enter recovery mode and cannot open my phone with its ics os
just sony logo
what can i di?
sorry for bad english
Click to expand...
Click to collapse
Somehow i got past this issue...I tried flashing the firmware again.
And it worked.
My phn ws back to normal. btw m using Neo V.
However, my problem come after that. I am unable to install any custom ROMS, like; MIUI or Pureness http://forum.xda-developers.com/showthread.php?t=1825268
Kindly help.

Try to use SonyPC Companion and re-install orignal firmware again........

just reflash it :good:

AUDI97 said:
just reflash it :good:
Click to expand...
Click to collapse
sorry could u tell exactly how to reflash it
i am new at this and i don't know much

He mean just reflash the rom you was flashing when your phone bricked..........
But, i think you have to restore your phone to the original conditions before flash a new rom.......try to use pccompanion or update service......(you can download from sony web site).

thank u all guys i got it fixed using flashtool

[Q] Stuck on optimising apps 1 of 1 xperia ray

Hey, i was searching for the answer for 5 days, i'm desperate now. Maybe anyone can help me. So the problem is that I didnt installed CWM after I instaled new rom, It's xperia ultimate HD 2.0.2 the problem coused poweramp now when i power it on it says optimising apps and takes forever, I'm kind a new in these things. Is there any way to instal cwm from computer? without recovery it's imposible to install new rom yes? help me please what should i do?