Help needed, possible brick - Verizon Samsung Galaxy S III

I have been using android phones for a long time, and used odin before, so I have no idea what is going on here. I was attempting to root my phone using the downloads and info in the sticky here, and now my phone won't turn on. I put the phone in odin mode, it was detected, i flashed the bootchain (step 1) in the PDA section, the screen went blank, odin said "Reset" in the first box, and sat there for a long time. Then it said pass, but there was still nothing on the screen. I waited a bit, but eventually unplugged it and tried to turn it on. I can't get any button combination to work, no recovery, odin mode, or normal powerup, no response if I plug in usb or the charger, the only thing I can get is if I plug the charger or usb in with no battery, the red light will come on for about 15 seconds, then go off. I really am afraid I bricked my phone somehow the first day I got it, and now I'm leaving on a business trip tomorrow and need to get this sorted tonight.
Am I out of luck, or is there something I'm missing?

How exactly did you try to enter recovery mode? I know that when I did this and i attempted to enter recovery i let go of the home and volume up too soon and the same thing would happen to me. Also make sure you are using odin v3.07

Did you verify the md5 signature of the file on your pc before you flashed it in Odin? If not, you should check it now. Could have been a bad download. Knowing what caused the brick can help us figure out how to fix it

Related

I bricked my phone!!!!!!

HELP! I was trying to frehsly install a rom..
so i used odin to "master clear" everything
it deleted everything!
hoping that in recovery mode, it'll let me "mount storage" so i can transfer my new rom into the phone, that didnt happen!!!
so, then i tried to go with odin 1 click to install i896 stock...
and it doesnt work , so i unplugged phone, and now i get that mobile phone error..
please help, the only thing i can do successfully do is put my phone in download mode! D:
PLEASE! PLEASE!
THANK YOU!
Open Odin, turn off your phone, hold the volume buttons, and plug it in to get it in download mode. Then use Odin to get stock rom on, then go from there.
Sent from my SAMSUNG-SGH-I897 using XDA App
Read carefully.....
ags on board said:
Open Odin, turn off your phone, hold the volume buttons, and plug it in to get it in download mode. Then use Odin to get stock rom on, then go from there.
Click to expand...
Click to collapse
+1
Go into the ODIN thread and read extensively. Since you can get into download mode, make sure that once you connect your phone you get the COM notification in ODIN. Mine always appears in the small box in the upper left portion of ODIN one-click (if you don't get this, reinstall the samsung drivers found in the ODIN thread and reboot. If you're running Win7, make sure you run ODIN as admin).
Master Clear does exactly what it says...it wipes all of your data. MC is only supposed to be used when your phone is on and fully booted up with USB debugging on.
Flashing back to stock should only take ~5 minutes max - if it halts unplug, pull your battery, wait a few seconds, and restart. If it continues to fail, try a different USB port. If using a PC, use the back USB ports. If it still fails, try a different system. (I had this issue this weekend and finally got it on the first run on my friend's laptop - not sure what happened, had flashed 5-6 times on mine previously).
Hope this helps. Once you're back to stock, be sure to thank designgears for his killer dev work!
EDIT:
PS It's pretty tough to brick a cappy - read extensively in the ODIN thread and you'll see what I mean.
Its always good practice to back everything up and know the step by step procedures before you ever do anything. Good luck!
Connexxions "how to" videos are VERY detailed and shows you step by step how to do just about everything on this phone. I highly recommend them.
don't panic, ur lucky that u can still get into download mode. that is just soft brick I think..
Sent from my SAMSUNG-SGH-I897 using XDA App

phone bricked i think

ok so out of no where my phone started flashing the boot screen i tried to odin it but it failed and it is now flashing a phone and a computer with a yellow warning sign in the middle how do i fix it if i can
also i cant get into recovery or download mode
You can still odin from the screen with the Yellow triangle on it. Try odin again, make sure that you put in the pit file, and that the odin package goes into the pda slot.
i cant odin it because the yellow triangle screen flashes so the phone is rebooting like every 5 seconds
The phone shouldn't reboot with the yellow triangle, are you sure you're holding down the trackpad and down vol buttons when turning on the phone (download mode)?
i cant turn the phone on as soon as i put the battery in the phone shows that screen and then 5 seconds later it goes off then 5 seconds comes back on ao so forth
Is this the screen you're seeing?
http://imageshack.us/photo/my-images/576/sdc10776y.jpg/sr=1
yes and that screen keeps flashing on and off
Have you tried this:
http://forum.xda-developers.com/showthread.php?t=1350060
my phone wont stay connected
like it connects then 5 seconds later it disconnects
Foorperif said:
ok so out of no where my phone started flashing the boot screen i tried to odin it but it failed and it is now flashing a phone and a computer with a yellow warning sign in the middle how do i fix it if i can
Click to expand...
Click to collapse
So by reading this, I assuming that Odin did recognize it before and then failed during the flash. You didn't unplug it before it was finished, right? It can take a while sometimes (and seem longer when something is kinda broken).
SD- Do you think his bootloader might have been corrupted somehow?
Try the Heimdell like SD suggests. Adam's stuff is great. If it fails, do it again, I have had to do it multiple times to get a phone right again (Guy I know flashed a wrong rom onto a different model phone with the wrong bootloaders-- hence using the heimell to load the correct ones onto it).
can i get a new bootloader then
Foorperif said:
my phone wont stay connected
Click to expand...
Click to collapse
There should be an option in Heimdall that you check for bootloaders. IF it is diminshed at first, run heimdall normally, and when it fails, it should be selectable. If this doesn't work out, there is a possibility of a hardware issue. If it works, make sure you hit thanks for Adam and SD for helping out...
my phone wont stay connected
any other help guys
If it won't stay connected long enough to flash in odin or heimdall then no, you have no other options.
thanks for trying guys
ok just found out my phone is hardware locked if it helps any of you guys

I'm in a little trouble here.

Well, Ive been flashing roms for a while now and I have an issue with my captivate.
Lets start in the beginning. I had my captivate on THS ICS rom and It was going great. But my captivate isn't that great anymore. The power button is broken, but I was able to go around that. (Sidenote: It turns on when I plug in the battery.) Anyway, I wanted to go back to stock because I did have the right bootloaders. (I couldnt get into download mode with the button combination. I thought it was the bootloaders fault. Im I wrong?) I wanted to switch to I9000 bootloaders but I had to start fresh. But before all that, I noticed that while I was on ICS rom, I was unable to go to download mode. I used to before, but it magically disappeared (I know it didnt, I know I did something to it but I don't quite remember when it happened.) So I was unable to flash a new rom, if I wanted to.
A couple of days ago, I bought a jig and it worked! It took me straight to download mode. So I decided to get my Captivate and make it go back to stock. So I opened Odin, it found my Cappy and I clicked start. But, it stopped at factoryfs.rfs. I waited a half hour and nothing. So I unplugged it and now it won't turn on. But it can still go into Download Mode and be seen by Odin but it just wont finish. I tried both odin one click and the regular odin. I looked everywhere for more than six hours and nothing came up. Please guys, if anyone knows what I can do to fix it, please reply.
I might have missed something, but just ask if you need any more info. Please help me.
Edit: I forgot to add this:
While I was on the ICS rom, I switched over to CM7 to see if the process of going back to stock would be easier. Thats when I tried to flash stock. It didnt work as well as I thought it would.
And I knew that I didnt have I9000 bootloaders because I installed the Icy Glitch kernel and each time I tried to have DIDDLE on it would go to deep sleep mode and I was unable to wake it back up.
As long as you can get to download mode you are fine. Try flashing a different stock from. Or using Hiemdell
I've tried both odin and Hiemdell. But with Hiemdell, it would always tell me that I dont have the drivers installed. So, it installs it for me. Even with the drivers installed, it keeps telling me that I dont have the proper drivers installed.
I have had this exact problem, where a bricked captivate can get into download mode but when restored to stock through a one-click, it freezes on the factoryfs.rfs. However, in my case after freezing at this stage, the phone was completely inoperable, and could not even enter download mode, so I am suprised yours could.
What works for me is to remove the battery, wait for a few seconds, put the battery back in, use the usb jig to enter download mode, and then WITHOUT the phone plugged into the pc, download and open this one-click file http://http://forum.xda-developers.com/showthread.php?t=731989.
Once the odin one click is open, plug the usb cable into the pc, and then into the phone. This one-click has never failed me. Hope this helps.
Ok, now it passed. I don't know what I did but now its back up and running. But now it boots up into recovery. I can't select anything because my phone's power button is broken. What do I do?
Juiceboy125 said:
Ok, now it passed. I don't know what I did but now its back up and running. But now it boots up into recovery. I can't select anything because my phone's power button is broken. What do I do?
Click to expand...
Click to collapse
Depending on the CWM recovery you're in, you can sometimes use the search capacitive key to do the same thing as the power button will do.
I had the same problem you had with Odin stopping on flashing a file, turns out I was using a third party USB cable. I switched to the USB cable provided by Samsung when I bought my cappy and problem solved. Hope that helps.
Sent from my SGH-I897 using XDA
Finally!
Well, I got my Cappy up and running again. While I was stuck in the CWM I just decided to install Gingerbread using a One click and it worked. Now I'm back to CM9. Thanks guys for the suggestions. I guess I just needed to wait and double check everything.

Please Help me.. I don't know how to fix this

My phone has been all screwy for months. I recently given up on it and bought a new phone but it irritates me that I still cannot fix this old phone.
After attempting to flash a new rom onto my phone everything went wrong. When I attempted to reboot the phone the phone showed the SAMSUNG screen then goes to CWD for recovery. I cannot fix this at all. Eventually I decided to run GTG's Ultimiate Unbrick thinking that Odin3 would fix my situation. It continuted to give me FAIL with every attempt. Now, the phone won't even show the SAMSUNG screen or the recovery screen. It just stays black... What can I do? Junk it? Is it permanently broke.. This is so upsetting.
Are you still able to access download mode? If so then i would try Heimdall this time using THIS flash file. Flash it once, let it reboot, then shutdown and go to download mode again. Flash once more with the "flash bootloaders" box checked. Has always worked for me when i screw something up due to not paying attention.
If you cannot access download mode WHAT-SO-EVER, i'm afraid i am unable to help.
Good luck
DarK_DemoN said:
Are you still able to access download mode? If so then i would try Heimdall this time using THIS flash file. Flash it once, let it reboot, then shutdown and go to download mode again. Flash once more with the "flash bootloaders" box checked. Has always worked for me when i screw something up due to not paying attention.
If you cannot access download mode WHAT-SO-EVER, i'm afraid i am unable to help.
Good luck
Click to expand...
Click to collapse
Tried today to put it into download mode. The screen flashes on completely white and back off. I can hear it connecting and disconnecting from the computer repeatedly. Im guessing there is nothing at all I can do from here. This really sucks.
mramazingpanda said:
Tried today to put it into download mode. The screen flashes on completely white and back off. I can hear it connecting and disconnecting from the computer repeatedly.
Click to expand...
Click to collapse
Does it connect and disconnect by itself? If it does then sounds like a hardware issue. If you can get it to connect to your computer open the JAR flash file which will open Heimdall after a few seconds (10-20). Once it's open press the Vol-Up button on your phone and see if Heimdall can see it (should say "Connected" in green at the bottom right).
Give it to me lol I'll fix it
Sent from my dr0id running Liquid Smooth r0m
I had something similar happen to me a long time ago. I would try to put it in download mode and the screen would do something but then just shut off. I pulled up heimdall and it said it was connected. I might have just gotten lucky. Give it a try though.

Need help with my samsung galaxy tab 3 lite!!!

So one day I decided to flash custom ROM onto my Samsung galaxy Tab 3 Lite (SM-T110) and I used Odin and was new to the whole Rom flashing thing, and so It messed up during flashing and I was stupid and unplugged my tablet and now it is stuck in the download mode saying "Firmware upgrade encountered an issue, please use KIES and try again" something along those lines, and I tried looking it up and tried to fix it, like holding down power button and hard rebooting, didn't work, which now, every time I plug it into my pc to try a flash factory ROM and it keeps turning on and off on the error screen. So can someone help? I cant take it apart because I am using a screwdriver and it is damaging it, to try and take out battery and put it back in, and I'm not buying one of those plastic tools, I want to but, its just for another reason why I can't, So can anyone help? Thanks!
EFS
iplayminecraftps4 said:
So one day I decided to flash custom ROM onto my Samsung galaxy Tab 3 Lite (SM-T110) and I used Odin and was new to the whole Rom flashing thing, and so It messed up during flashing and I was stupid and unplugged my tablet and now it is stuck in the download mode saying "Firmware upgrade encountered an issue, please use KIES and try again" something along those lines, and I tried looking it up and tried to fix it, like holding down power button and hard rebooting, didn't work, which now, every time I plug it into my pc to try a flash factory ROM and it keeps turning on and off on the error screen. So can someone help? I cant take it apart because I am using a screwdriver and it is damaging it, to try and take out battery and put it back in, and I'm not buying one of those plastic tools, I want to but, its just for another reason why I can't, So can anyone help? Thanks!
Click to expand...
Click to collapse
hi and don`t worry
1-flash EFS file with odin (in AP).
2-than you can wipe in recovery mode.GOOD LUCK
NOTE:efs file which is compitble with your device
i.daniyal said:
hi and don`t worry
1-flash EFS file with odin (in AP).
2-than you can wipe in recovery mode.GOOD LUCK
NOTE:efs file which is compitble with your device
Click to expand...
Click to collapse
where can I find an bfs? and what does it stand for?
EDIT: I think I found one, but ill have to wait till I get home from school to do it
So I downloaded it and it was in .tar format. do I need to convert it? because in ap it doenst show up, it shows file formats and .tar is not one of them.
EDIT: never mind used WinZip, and added it, but like I said, every time I plug my tablet into my pc, it turns on, shows the download mode error screen and turn off, then turns right back on, with same screen, and so on and so on. so I really cant do anything till that is fixed...any suggestions? Thanks!
ok try this method:
http://www.99mediasector.com/fix-er...d-issue-please-select-recovery-mode-kies-try/
i.daniyal said:
ok try this method:
http://www.99mediasector.com/fix-er...d-issue-please-select-recovery-mode-kies-try/
Click to expand...
Click to collapse
Ok just fixed the turning on and off thing, I had best idea, hold power button and plug in cord, then let go of power button and it should stay on now
EDIT: just plugged into my pc and its doing it again, it worked with charging cable, but I guess since I unplugged it, it stopped working, ill see when I get home from school and try again
Also turns out the screen only flashes on and off, when it is connected to my pc, when it is to the wall, its fine, so I need to figure that out
Ok it works with my tablet plugged into the "charging only" port basicly, but it does both charge and can send data. But every time I try to flash i on Odin, It always fails, so idk what to do
iplayminecraftps4 said:
Ok it works with my tablet plugged into the "charging only" port basicly, but it does both charge and can send data. But every time I try to flash i on Odin, It always fails, so idk what to do
Click to expand...
Click to collapse
1-enable USB debuging
2-what is the error?
I cant enable it. Still in download mode error screen, and I try to flash it using Odin and it doesn't say pass it says failed, but I'll try to reinstall Odin and maybe download a fresh copy of the stock ROM
iplayminecraftps4 said:
I cant enable it. Still in download mode error screen, and I try to flash it using Odin and it doesn't say pass it says failed, but I'll try to reinstall Odin and maybe download a fresh copy of the stock ROM
Click to expand...
Click to collapse
ok I fixed it, using this link https://www.full-repair-firmware.com/2017/11/full-firmware-t110.html
ok good
But it made it a different language upon setup but I can change to English, but it installs like 4 applications every time I reset it and boot it up, I can uninstall them, but its annoying, and the app called calendar or is supposed to be, is called s planer, I don't like it so I'm trying to find a stock ROM for it so it is back to normal.

Categories

Resources