recover memory maybe? hope?! - AT&T, Rogers HTC One X, Telstra One XL

okay so as many of you know I ruined my phone and i said i was going to send it to jtag repair. as much as i want that to happen i dont have the funds at the moment to do so. what i did was call AT&T and then told them that i had a problem when updating to jelly bean, theyre sending me a new phone and so heres my question! is there any hope what so ever to recover my memory? i went to go see "In Flames" and i really would like to get my pictures and videos before i send it in, in 4-6 days. any ideas? and please, be nice to me on this one, i made a stupid mistake. but now i can learn from it. :/

I don't believe there's any way to do it short of jtag.
When you're in QHUSB_DLOAD mode, what that means is that the CPU can't find instructions on how to boot up, in this case, hboot. Either it's corrupted or the partition map is unreadable so it can't find it. That means it has no way to read the onboard memory because it has no OS to work with. It's like trying to start your PC without a bios in place--nothing happens.

Hi Elivis, you responded awhile back on my thread here: http://forum.xda-developers.com/showthread.php?t=2187491
I tried everything that was suggested by you and others with no luck, my question is am I having the same problem as the OP?

iElvis said:
I don't believe there's any way to do it short of jtag.
When you're in QHUSB_DLOAD mode, what that means is that the CPU can't find instructions on how to boot up, in this case, hboot. Either it's corrupted or the partition map is unreadable so it can't find it. That means it has no way to read the onboard memory because it has no OS to work with. It's like trying to start your PC without a bios in place--nothing happens.
Click to expand...
Click to collapse
Thank you... That's what I thought :/ okay well it was worth a shot asking
Sent from my HTC Inspire 4G using xda app-developers app

Okkoto said:
Hi Elivis, you responded awhile back on my thread here: http://forum.xda-developers.com/showthread.php?t=2187491
I tried everything that was suggested by you and others with no luck, my question is am I having the same problem as the OP?
Click to expand...
Click to collapse
No. He has a corrupted hboot, most likely. It can happen when your phone dies in the middle of a firmware update, which seems to be what happens during an OTA with SuperCID.
You have some strange connection error that's preventing your computer from communicating with your phone.

My simple mind is wondering why if hboot is corrupt can you just not run the jet tool then go through the unbricking process
Sent from my One X using Xparent Green Tapatalk 2

twisteddroid said:
My simple mind is wondering why if hboot is corrupt can you just not run the jet tool then go through the unbricking process
Sent from my One X using Xparent Green Tapatalk 2
Click to expand...
Click to collapse
Well look at it this way , computer can't read anything on phn, its like some1 who speaks English trying to read a mixed up word puzzle in Chinese. Maybe try hooking up with linnux but It still may not wrk
Sent from my HTC One X using xda premium

twisteddroid said:
My simple mind is wondering why if hboot is corrupt can you just not run the jet tool then go through the unbricking process
Click to expand...
Click to collapse
He's on the 2.20 base. There is no unbricking tool for that.

iElvis said:
He's on the 2.20 base. There is no unbricking tool for that.
Click to expand...
Click to collapse
I'm on 2.20 and used unbrick method to unbrick mine after running jet. A week before s-off I was pissed cause I almost had a paperweight when I could have waited one more week lol
Sent from my One X using Xparent Green Tapatalk 2

Related

Qhsusb_dload

Just tried to install CWM using Recovery Mangaer APP. Now it wont boot and i get QHSUSB_DLOAD in device manager. Am i fubar'd or is this brick recoverable? TIA
probably just need to get someone to dump the recovery partition and flash it with odin
designgears said:
probably just need to get someone to dump the recovery partition and flash it with odin
Click to expand...
Click to collapse
Any suggestions on where to start? at least i'm glad it happened to me instead of they guy i recommended it to. He was looking for a way to install CWM without a computer.. I don't need anymore enemies :angel:
designgears said:
probably just need to get someone to dump the recovery partition and flash it with odin
Click to expand...
Click to collapse
any idea where i can fond the drivers for 64bit win 7?
got the drivers installed. have the mmcblk0p22.img. Whats next? lol
Have you tried to RUU? Since the drivers are installed.
Sent from my HTC One X using Tapatalk 2
kleeman7 said:
Have you tried to RUU? Since the drivers are installed.
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
no but i will. thanks.
Hunting Odin download now.
kleeman7 said:
Have you tried to RUU? Since the drivers are installed.
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
ruu doesn't see it
QHUSB_DLOAD mode usually means you bricked hard and unless you have some software that the rest of us mere mortals don't, you will need to warranty it.
looks like odin is for Samsung devices?
anyone have any ideas? Device manager now reads:
Qualcomm HS-USB QDloader 9008 (com 7)
Hunt3r.j2 said:
QHUSB_DLOAD mode usually means you bricked hard and unless you have some software that the rest of us mere mortals don't, you will need to warranty it.
Click to expand...
Click to collapse
Qualcomm tools people have been looking for? I saw a post somewhere here at XDA and the OP was talking about some Qualcom tool kit. The'yve also been talking about some qualcom tools in the s-off thread.. Same thing??
nugzo said:
Qualcomm tools people have been looking for? I saw a post somewhere here at XDA and the OP was talking about some Qualcom tool kit. The'yve also been talking about some qualcom tools in the s-off thread.. Same thing??
Click to expand...
Click to collapse
I dunno, but it was talked about in the Sensation Unbricking Project, it isn't easy to recover at all, and for most it's a lost cause....
Hunt3r.j2 said:
I dunno, but it was talked about in the Sensation Unbricking Project, it isn't easy to recover at all, and for most it's a lost cause....
Click to expand...
Click to collapse
Thank you. The only tools i could find was revskills. Dont know if that's what i need or not. 90% of that is over my head.
nugzo said:
looks like odin is for Samsung devices?
anyone have any ideas? Device manager now reads:
Qualcomm HS-USB QDloader 9008 (com 7)
Click to expand...
Click to collapse
Yes Odin is Samsung. Get in touch with the s-off guys they have been playing around with download mode and may be able to help.
Borrowed this maybe it throwing you into recovery may help, also they said fastboot flash works, maybe flash twrp from fastboot.
beaups said:
I tried the pg1fs. sig check failure. As a matter of fact doing "fastboot flash aksldjflkadsfjdlsk pg1fs.img" causes the same error, so something is in the img that causes sig check or any flash attempt except recovery is sig checked. Fastbook oem refurbish puts out a lot of interesting text, then reboots into recovery and looks for something (doesn't say what).on sd card (I tried copying IMG's to internal and external sd, no luck). Interesting thing about refurb command is it seems particularly "excited" about the fact that we have super CID - run it yourself and see, no harm is done (data, etc.). one recovery boots you can screw around with volume and power keys to see the text.
Click to expand...
Click to collapse
Sent from my HTC One X using Tapatalk 2
Just thought I'd mention this to the op, I saw the thread where you were trying to help someone else flash a recovery without a pc with all the best intentions and ended up bricking. It broke my heart...lol sounds mushy I know, but really. Best of luck getting it fixed up man.
Sent from my HTC One X using Tapatalk 2
anyone find solution?
initialz said:
anyone find solution?
Click to expand...
Click to collapse
Thanks for the three month necro, but once again, go to the S-OFF thread...
what version was the last ruu you ran before it bricked..
You are probably SOL.
Sent from my One X using xda app-developers app
When you turn your phone on the first (idk) seconds your in emmc mode which you can dd the hboot partition in to fix your phone. Read it a while back in the S-Off thread, seems like it worked.
Edit: Rewrote whole thing, remembered how
Sent from my HTC One XL using xda premium

Phone won't boot after rom flash?

I got my one x last week and rooted it a few days ago via the all in one method found here ( http://forum.xda-developers.com/showthread.php?t=1952426 ) and everything worked including superuser. After a few days of use I decided to try the icecoldjelly aokp rom found here ( http://onexroot.com/one-x-roms/icecoldjelly-aokp-rom-for-rooted-one-x-android-4-1-2/ ). The rom flash said successfull and so did the gaps zip. Then when I pressed reboot the phone never cam back on. I tired living it charging overnight in case it lost charge (even though it showed almost full before I flashed). I'm not sure but I think I may be out luck?
Is there anything I can try to get this thing to boot up?
Ezence01 said:
I got my one x last week and rooted it a few days ago via the all in one method found here ( http://forum.xda-developers.com/showthread.php?t=1952426 ) and everything worked including superuser. After a few days of use I decided to try the icecoldjelly aokp rom found here ( http://onexroot.com/one-x-roms/icecoldjelly-aokp-rom-for-rooted-one-x-android-4-1-2/ ). The rom flash said successfull and so did the gaps zip. Then when I pressed reboot the phone never cam back on. I tired living it charging overnight in case it lost charge (even though it showed almost full before I flashed). I'm not sure but I think I may be out luck?
Is there anything I can try to get this thing to boot up?
Click to expand...
Click to collapse
You flashed an international ROM, you now probably have an expensive paperweight. Sorry, please read the stickies next time
You may be able to dd a partition 4 to your phone if someone dumps one for you, and if you know how/someone is willing to help.
First go try this http://unlimited.io./qhsusbdload.htm
I hate seeing all these hard bricked phones I'm sorry but yeah u shoulda read:/
absolutelygrim said:
You flashed an international ROM, you now probably have an expensive paperweight. Sorry, please read the stickies next time
You may be able to dd a partition 4 to your phone if someone dumps one for you, and if you know how/someone is willing to help.
First go try this http://unlimited.io./qhsusbdload.htm
Click to expand...
Click to collapse
I figured as much. For some reason I mistook the international rom for the att one
If I tried to exchange it, would att be able to notice this?
I'll try your link first, thank you.
Ezence01 said:
I figured as much. For some reason I mistook the international rom for the att one
If I tried to exchange it, would att be able to notice this?
I'll try your link first, thank you.
Click to expand...
Click to collapse
Umm, yes they will notice it. Just don't run over it with your car and make an insurance claim :\
If you can install Ubuntu 12.04 and teamviewer i'd be willing to try and help you
absolutelygrim said:
Umm, yes they will notice it. Just don't run over it with your car and make an insurance claim :\
If you can install Ubuntu 12.04 and teamviewer i'd be willing to try and help you
Click to expand...
Click to collapse
lol, no definitely not insurance claim. I'm in the process now, I'll update with results. Thanks for the advice and help.
Ezence01 said:
lol, no definitely not insurance claim. I'm in the process now, I'll update with results. Thanks for the advice and help.
Click to expand...
Click to collapse
If it doesn't work and you still want help send me a PM
man that icecoldjelly rom is doing some damage....:crying:
Crappyvate said:
man that icecoldjelly rom is doing some damage....:crying:
Click to expand...
Click to collapse
Yea it is. But I think I have an idea that will help everyone.. Not that they will read the OP if I start a thread :beer:
absolutelygrim said:
Yea it is. But I think I have an idea that will help everyone.. Not that they will read the OP if I start a thread :beer:
Click to expand...
Click to collapse
don't tell me you want to start a tutorial on dd'ing to restore the partition that was overwritten by icecoldjelly that would be opening a big can of worms ? although maybe not since they are already bricked
Crappyvate said:
don't tell me you want to start a tutorial on dd'ing to restore the partition that was overwritten by icecoldjelly that would be opening a big can of worms ? although maybe not since they are already bricked
Click to expand...
Click to collapse
I will try that if I can't fix it.
They are already bricked so it won't hurt any more than it is right now
If I can fix this guy's phone, then i'll consider starting a tutorial.
I'm going to document everything as I do it, and make it noob proof. IF it works. BIG FAT IF
absolutelygrim said:
I will try that if I can't fix it.
They are already bricked so it won't hurt any more than it is right now
If I can fix this guy's phone, then i'll consider starting a tutorial.
I'm going to document everything as I do it, and make it noob proof. IF it works. BIG FAT IF
Click to expand...
Click to collapse
got a backup of my mmcblk0p4 if you want
Crappyvate said:
got a backup of my mmcblk0p4 if you want
Click to expand...
Click to collapse
Throw it to me
absolutelygrim said:
Throw it to me
Click to expand...
Click to collapse
just remove the .txt
Crappyvate said:
just remove the .txt
Click to expand...
Click to collapse
Right now we are trying to time it right and get his phone into emmc mode.. one that's done, I think we should have this problem fixed.
Windows recognizes it as QHSUSB_DLOAD (so its still alive), but when he holds down power, no lights flash, making this hard to time
---------- Post added 28th October 2012 at 12:22 AM ---------- Previous post was 27th October 2012 at 11:52 PM ----------
Crappyvate said:
just remove the .txt
Click to expand...
Click to collapse
Is your mmcblk0p4 from 2.20? I don't know if that would matter.
I think it's because we are using Ubuntu 12.10 and not 12.04, will report back eventually..
12.10 is not happening, if it's successful on 12.04, even just the unbrick method, I'm not concerned about the downgrade anymore, this could be good news for our little international rom lovers
Will try 12.04 sometime today
Sent from my HTC One XL using xda-developers app
absolutelygrim said:
12.10 is not happening, if it's successful on 12.04, even just the unbrick method, I'm not concerned about the downgrade anymore, this could be good news for our little international rom lovers
Will try 12.04 sometime today
Sent from my HTC One XL using xda-developers app
Click to expand...
Click to collapse
sorry i was out...no partition is from 1.85 or maybe even 1.73 don't remember,
any luck ?? have you tried to talk to beaups or 18th.abn ?
Unbricking has been a real pain in the butt using ubuntu, we found it to much easier and more successful using tinycore from a bootable USB. I don't know why, but it's been proven on several devices so try that. Also, p4 holds the device imei and cid, when it gets corrupted in may be causing the soft brick because p12 is dependent on its information since it also displays the device imei and phone info, so do p12, make sure your using a signed image and do p4, which can be any p4, the imei will just have to be repaired afterward. It will spring to life, I promise you
Sent from my HTC One XL using Tapatalk 2
Crappyvate said:
sorry i was out...no partition is from 1.85 or maybe even 1.73 don't remember,
any luck ?? have you tried to talk to beaups or 18th.abn ?
Click to expand...
Click to collapse
18th.abn said:
Unbricking has been a real pain in the butt using ubuntu, we found it to much easier and more successful using tinycore from a bootable USB. I don't know why, but it's been proven on several devices so try that. Also, p4 holds the device imei and cid, when it gets corrupted in may be causing the soft brick because p12 is dependent on its information since it also displays the device imei and phone info, so do p12, make sure your using a signed image and do p4, which can be any p4, the imei will just have to be repaired afterward. It will spring to life, I promise you
Sent from my HTC One XL using Tapatalk 2
Click to expand...
Click to collapse
@crappy, nah we had to stop for the night cause I had to get up early and get senior pictures taken.
I had him install Ubuntu 12.04 rather than use a LiveCD, so we'll try it again later today.
@18th
We got to the point where it starts writing p4, but hangs and continuously sends the Reset, I posted in the thread over at the evo LTE forum asking about it, holding the power button for 30+ seconds as suggested prints an error cannot reset device
I am using mmcblk0p4 from crappy, and your hboot from dropbox.
On the hox, you only need to hold down the power button for about 10-12 seconds so 30 may be too long and sending a time out to the emmc recover tool
Sent from my HTC One XL using Tapatalk 2

New to Inspire

Hey guys, I just picked up a Inspire as a play toy since my cousin upgraded.. What in looking for is a RUU for the latest update if there is any.. 2.3.5, firmware 3.20 if I'm not mistaken. (Its not in front of me at the moment).. I've tried numerous sites and it seems as though they don't exist anymore..
Quick history, phone worked fine. Bone stock, never rooted or unlocked. So she took the latest update, and ever since then it has problems... Main thing is when the screen goes black, it reboots. EVERY SINGLE TIME. So I decided to unlock via htcdev, fastbooted twrp 2.4.4.0, and flashed a rom to see if it fixed it. Flashed jellytime and respective gapps, no dice. Phone is still rebooting upon locking. Last resort is a ruu... I've tried over clocking, overvolting, etc... No go. I'm not ruling out hardware 100%, but bc it didn't do this before the update makes it last on my list... Any advice?
Sent from my One X using Tapatalk 2
Test it without the sd card.
Reflash the ruu.
Sent from a dream.
I don't have the ruu lol. That's why I posted here... It seems like every site has it taken down...
Sent from my One X using Tapatalk 2
InflatedTitan said:
I don't have the ruu lol. That's why I posted here... It seems like every site has it taken down...
Sent from my One X using Tapatalk 2
Click to expand...
Click to collapse
https://www.google.com/#hl=en&output=search&sclient=psy-ab&q=htc_inspire4g_att_RUU_3.20.502.52_US&oq=htc_inspire4g_att_RUU_3.20.502.52_US&gs_l=hp.3...3147.3147.0.4546.1.1.0.0.0.0.204.204.2-1.1.0.les%3B..0.0...1c.2.6.psy-ab.m3erFIGkS8Q&pbx=1&bav=on.2,or.r_cp.r_qf.&bvm=bv.43828540,d.eWU&fp=c539a620ba7dec8b&biw=1366&bih=641
There seems to be a link with the files, haven't checked if it's in it. As well, I have a copy of the last inspire update but no where to upload it and in case you can't find it via the provided link.
Hey thanks man. I'll give that a shot .
One more question, if I flash the stock lower firmware zip, would that be enough to run the aahk to s-off? Or is there more to it than that? Last time I tried it said the firmware was not supported up to that version
Sent from my One X using Tapatalk 2
InflatedTitan said:
Hey thanks man. I'll give that a shot .
One more question, if I flash the stock lower firmware zip, would that be enough to run the aahk to s-off? Or is there more to it than that? Last time I tried it said the firmware was not supported up to that version
Sent from my One X using Tapatalk 2
Click to expand...
Click to collapse
I wouldn't recommend flashing a lower firmware.... Not sure if anything bad will happen but it does not seem like a good idea. Besides, aahk has been retired. There is no support for it and it is only for advanced users.
You can try glevitans tool in the development section to unlock your bootloader but he two has left these forums due to too many self rightious (or however you spell that) noobs.
Sent from a dream.
Right... I'm already unlocked and rooted.. So there's no way to s-off without jumping through hoops? Lol... I can throw out some fastboot and adb commands... But as far as DD'ing blck partitions I'll just give up on s-offing
Sent from my One X using Tapatalk 2
Hopefully someone could give a few more opinions before I throw this thing in the trash can... I'm still having the reboot issue... I can use it for hours on end as long as the screen is on. It will stay on if its connected to any power source... But when its not plugged in and the screen locks it reboots about 3 seconds later...
Didn't do this before I took the 2.35 ota.. I've tried 15 different ROMs, different kernels, I tried overclocking and trying to get rid of deep sleep. Don't know what else to do. I'd love to try to raise the voltage but every kernel/ROM I use doesn't give me that option.
Also I'd like to mention when I boot into bootloader it immediately searches for pd98img.zip. is this normal? I never seen another boot loader look for a certain file..
Anyway, any help will be appreciated... I'd hate to get rid of this phone if its fixable...
This is the bootloader
Sent from my HTC One XL using Tapatalk 2
InflatedTitan said:
Hopefully someone could give a few more opinions before I throw this thing in the trash can... I'm still having the reboot issue... I can use it for hours on end as long as the screen is on. It will stay on if its connected to any power source... But when its not plugged in and the screen locks it reboots about 3 seconds later...
Didn't do this before I took the 2.35 ota.. I've tried 15 different ROMs, different kernels, I tried overclocking and trying to get rid of deep sleep. Don't know what else to do. I'd love to try to raise the voltage but every kernel/ROM I use doesn't give me that option.
Also I'd like to mention when I boot into bootloader it immediately searches for pd98img.zip. is this normal? I never seen another boot loader look for a certain file..
Anyway, any help will be appreciated... I'd hate to get rid of this phone if its fixable...
This is the bootloader
Sent from my HTC One XL using Tapatalk 2
Click to expand...
Click to collapse
I can't give you any other advice to the first problems you had but yes when you boot into hboot. It automatically searches for a pd98img.zip.. That is completely normal
Sent from my Inspire 4G using xda premium

[Q] HTC one x at&t QHSUSB_DLOAD mode, will not start.

I have a htc x AT & T one that will not start, I have looked in several forums and have not found the solution, I need help?
1. When the phone is connected to the mains or red light.
2. At precionar the power button for several seguntos the buttons below gives no flash and no response.
3. When I connect the phone to a PC with Windows only recognizes QHSUSB_DLOAD no response from phone.
This happened after installing RUU 3.18.502.6.
have any solution for my case?
This has happened to a few people. Were you rooted with SuperCID? It's not clear what the cause is, but your phone is bricked.
It's possible the jet tool might be able to unbrick it. There is also a service called jtag that will cost around $75.
You sir, are screwed. QHSUSB_DLOAD means the phone is most likely bricked.
Did you have SuperCID? You should have read this: http://forum.xda-developers.com/showthread.php?t=2181929
You can try the unbrick evita thread. You'll need a Linux boot disk. If you can't pull up the emmc partitions then you're SOL. Which is most likely the case but doesn't hurt to check right?
If you manage to restore your phone be sure to s-off before trying to ruu again.
Sent from my HTC One X using xda app-developers app
Please help me!
Hi, im only 14 years old, from argentina. I bricked my phone a month ago by flashing ICJ into HTC One X evita, and i spent like 160 dollars to repair it by jtag as here in argentina the jtag service did not work. Today i was also updating to RUU 3.18.502.6 through the RUU downloaded from HTC site and as it finished a message appeared saying it completed succesfully. But when i tried to boot it it wont turn on nor charge, and my PC detected as QHUSB_DLOAD my heart freezed as they are the same symptoms as last time. I would like to know please any solution to this, and also, will jtag service work this time or this case is like the one that happened to me before. Please any answer would be great. Thank You!
Nicobesso said:
Hi, im only 14 years old, from argentina. I bricked my phone a month ago by flashing ICJ into HTC One X evita, and i spent like 160 dollars to repair it by jtag as here in argentina the jtag service did not work. Today i was also updating to RUU 3.18.502.6 through the RUU downloaded from HTC site and as it finished a message appeared saying it completed succesfully. But when i tried to boot it it wont turn on nor charge, and my PC detected as QHUSB_DLOAD my heart freezed as they are the same symptoms as last time. I would like to know please any solution to this, and also, will jtag service work this time or this case is like the one that happened to me before. Please any answer would be great. Thank You!
Click to expand...
Click to collapse
This site works for some of the bricks... Didn't work for mine...
http://unlimited.io/qhsusbdload.htm
I tried this method but it did not work ... I'm still looking for a solution.
FarBeyond said:
This site works for some of the bricks... Didn't work for mine...
http://unlimited.io/qhsusbdload.htm
Click to expand...
Click to collapse
Maybe you, and others,need to learn to read again... Sorry to be rude, but that website clearly states at the top, "THIS METHOD WILL NOT WORK FOR DEVICES BRICKED BY FLASHING ROMS OR ANY OTHER SOURCE".
Also, PblClear.zip wipes the primary bootloader partition. Not the greatest idea...
Sent from my HTC One X using xda premium
Ok
Myrder said:
Maybe you, and others,need to learn to read again... Sorry to be rude, but that website clearly states at the top, "THIS METHOD WILL NOT WORK FOR DEVICES BRICKED BY FLASHING ROMS OR ANY OTHER SOURCE".
Also, PblClear.zip wipes the primary bootloader partition. Not the greatest idea...
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Yes i know, but as there is a lot of people like you with experience, maybe someone can help me.
http://forum.xda-developers.com/showthread.php?p=39545425
This is a discussion we were having about installing QHSUSB_DLOAD drivers and repairing them via usb.Might have useful links on it for you to do some investigation.
Sent from my HTC One X using xda premium

[Q] Hard Bricked? Don't see how....

Ladies and Gents,
I made sure I chose the correct RUU based on my CID (CWS__001)
I relocked my phone and attempted to install "RUU_EVITA_UL_JB_45_S_Cingular_US_3.18.502.6_Radio_ 0.24p.32.09.06_10.130.32.34_release_signed.exe". After the RUU finished my phone seems to be hard bricked.
Won't Boot.
No power lights.
I knew this could happen when flashing an international version. AFTER getting owned I also found this post http://forum.xda-developers.com/showthread.php?t=2181929. Which was blatantly in the beginning of the forum. Has anyone found a fix for this issue, or is my only option JTAG repair?
Thanks,
Ryan
ryan9316 said:
Ladies and Gents,
I made sure I chose the correct RUU based on my CID (CWS__001)
I relocked my phone and attempted to install "RUU_EVITA_UL_JB_45_S_Cingular_US_3.18.502.6_Radio_ 0.24p.32.09.06_10.130.32.34_release_signed.exe". After the RUU finished my phone seems to be hard bricked.
Won't Boot.
No power lights.
I knew this could happen when flashing an international version. AFTER getting owned I also found this post http://forum.xda-developers.com/showthread.php?t=2181929. Which was blatantly in the beginning of the forum. Has anyone found a fix for this issue, or is my only option JTAG repair?
Thanks,
Ryan
Click to expand...
Click to collapse
You could take your phone back and tell them it won't boot etc.
If you can't get it to boot neither can they, so no-one will know it's been unlocked/rooted.
Some people will say this is fraudulent, but hey, if you can live with yourself who cares what anyone else thinks?
Pft I returned mine to Telus when the same thing happened to me. The way I see it, it was HTC's RUU that bricked my phone, not me. Like you, I did not have supercid and was S-ON.
You could try the unbrick Evita thread. If you make it past step 3 you can save your phone.
You'll need to boot to Linux.
Sent from my One X using xda app-developers app
exad said:
Pft I returned mine to Telus when the same thing happened to me. The way I see it, it was HTC's RUU that bricked my phone, not me. Like you, I did not have supercid and was S-ON.
You could try the unbrick Evita thread. If you make it past step 3 you can save your phone.
You'll need to boot to Linux.
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
I saw this and will give it a try, thank you for the advice!
ryan9316 said:
I saw this and will give it a try, thank you for the advice!
Click to expand...
Click to collapse
I bricked my phone trying to install elementalx and phone wouldn't boot at all and no lights. sent it in for jtag and they told me emmc controller was unresponsive and sent it back to me. looks like I may have to trash the phone... or make a few bucks on ebay.
mkalbarc said:
I bricked my phone trying to install elementalx and phone wouldn't boot at all and no lights. sent it in for jtag and they told me emmc controller was unresponsive and sent it back to me. looks like I may have to trash the phone... or make a few bucks on ebay.
Click to expand...
Click to collapse
Did they refund you? I was going to send it into mobiletechvideos for JTAG. I don't see the phones selling for more than 100$ on ebay.
ryan9316 said:
Did they refund you? I was going to send it into mobiletechvideos for JTAG. I don't see the phones selling for more than 100$ on ebay.
Click to expand...
Click to collapse
If the emmc controller isn't responding, it's worth even less than that.
Sent from my One X using xda app-developers app
ryan9316 said:
Did they refund you? I was going to send it into mobiletechvideos for JTAG. I don't see the phones selling for more than 100$ on ebay.
Click to expand...
Click to collapse
they did refund. minus the cost of shipping and something else, however. it was worth a try though... All I know though is I will never touch an elemental kernel again... not worth it that's for sure...
mkalbarc said:
they did refund. minus the cost of shipping and something else, however. it was worth a try though... All I know though is I will never touch an elemental kernel again... not worth it that's for sure...
Click to expand...
Click to collapse
Just curious about your situation. Did the kernel flash successfully and then just not boot? What ROM were you flashing it over? Tons of people, myself included, have flashed that kernel without issue so I'm interested in what exactly happened.
pside15 said:
Just curious about your situation. Did the kernel flash successfully and then just not boot? What ROM were you flashing it over? Tons of people, myself included, have flashed that kernel without issue so I'm interested in what exactly happened.
Click to expand...
Click to collapse
Sure, I too have used their kernels and have never had an issue until this time. So I started to install the kernel and it froze at I believe 60%? Then it sat... It said the flash could take awhile so to just wait so I did... For 2 hours. I knew something wasn't right because no elemental flash has taken my phone longer than a few minutes before this one so without thinking i'd hurt anything I held the buttons to hard power off the phone. After it shut off it's been completely dead since. No charge lights, no sign of any life at all other then the QHSUSB_DLOAD under device manager when plugged into my PC. the rom that I had flashed was the latest cleanrom. super bummed but i'll get over it. the worst part about this was I had pics of my kids that I had not backed up that are now lost.
mkalbarc said:
Sure, I too have used their kernels and have never had an issue until this time. So I started to install the kernel and it froze at I believe 60%? Then it sat... It said the flash could take awhile so to just wait so I did... For 2 hours. I knew something wasn't right because no elemental flash has taken my phone longer than a few minutes before this one so without thinking i'd hurt anything I held the buttons to hard power off the phone. After it shut off it's been completely dead since. No charge lights, no sign of any life at all other then the QHSUSB_DLOAD under device manager when plugged into my PC. super bummed but i'll get over it. the worst part about this was I had pics of my kids that I had not backed up that are now lost.
Click to expand...
Click to collapse
That does suck about the pictures. That would upset me more than the phone as well. I went and looked at the thread after I saw your post and saw a couple of other bricks aside from yours in the last couple of hundred posts. Very unfortunate that flashing a kernel bricked it. I try to stay away from anything that uses the Aroma Installer unless there are no other options, not saying that was the problem, but I've had numerous issues with it previously. After seeing multiple bricks from a basic kernel flash I'm going to definitely be more cautious about what I flash from now on. I'd be totally screwed if I bricked this phone. Anyway, hope you end up with something better out of this, like the HTC One.
pside15 said:
That does suck about the pictures. That would upset me more than the phone as well. I went and looked at the thread after I saw your post and saw a couple of other bricks aside from yours in the last couple of hundred posts. Very unfortunate that flashing a kernel bricked it. I try to stay away from anything that uses the Aroma Installer unless there are no other options, not saying that was the problem, but I've had numerous issues with it previously. After seeing multiple bricks from a basic kernel flash I'm going to definitely be more cautious about what I flash from now on. I'd be totally screwed if I bricked this phone. Anyway, hope you end up with something better out of this, like the HTC One.
Click to expand...
Click to collapse
Funny thing about the One... I was thinking about getting it but after this issue I will never look at another phone that doesn't have a removable sd card...
I think a key thing to note here is that you are flashing software that has been altered by someone you don't know and you can never be sure that things will work out. There's huge risks associated with rooting/unlocking your phone. If there wasn't HTC would warrant your phone regardless of what you do.
If you don't have an answer to the question "What will I do when I brick my phone?" don't root. Whenever modding anything, consoles, phones, set top boxes, I always assume that I will render it unusable. If that doesn't sit well with me, I don't modify it. That should be the general rule of thumb to follow.
Sent from my One X using xda app-developers app
3 words: Dropbox Camera Upload.
exad said:
I think a key thing to note here is that you are flashing software that has been altered by someone you don't know and you can never be sure that things will work out. There's huge risks associated with rooting/unlocking your phone. If there wasn't HTC would warrant your phone regardless of what you do.
If you don't have an answer to the question "What will I do when I brick my phone?" don't root. Whenever modding anything, consoles, phones, set top boxes, I always assume that I will render it unusable. If that doesn't sit well with me, I don't modify it. That should be the general rule of thumb to follow.
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
Very well said... I always get a little nervous when screwing with a new $500+ device.
Sent from my HTC One X using xda app-developers app
iElvis said:
3 words: Dropbox Camera Upload.
Click to expand...
Click to collapse
Thank you for the advice! I will remember that with my next phone.
I just use g+ to instantly upload my photos. Unlimited space is hard to argue with
Sent from my One X using xda app-developers app
phone not able to boot
guys please help me out I flashed stock root JB ROM after that my device wont boot just white screen with HTC logo. The phone boots into recovery but I wiped the sd card SD card mount error is being returned.
Clockworkmod recovery v6.0.3.1 S off
anuj.sherawat said:
guys please help me out I flashed stock root JB ROM after that my device wont boot just white screen with HTC logo. The phone boots into recovery but I wiped the sd card SD card mount error is being returned.
Clockworkmod recovery v6.0.3.1 S off
Click to expand...
Click to collapse
Install twrp 2.3.3.1 and reformat sd card with a pc. Move Rom to sd and reflash. And also what hboot? I know you said s-off bit did you fastboot the boot.img and see is that helped?
Sent from my HTC One X using xda app-developers app
31ken31 said:
Install twrp 2.3.3.1 and reformat sd card with a pc. Move Rom to sd and reflash. And also what hboot? I know you said s-off bit did you fastboot the boot.img and see is that helped?
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
thanks first of all I was on CMW, formatted the drive as computer prompted, lost the data but was able to flash the ROM and fastboot the boot image to phone.
Now only one problem the phone restarts and then goes to boot loop everytime I have to fastboot the boot image file.
DO I need to change the recovery and is there any way to by pass the fastboot process? Sorry for noob question

Categories

Resources