A little lost here... sorry in advance!! - Galaxy Note 10.1 Q&A, Help & Troubleshooting

Hi everyone!!
Quick introduction: I'm just a regular guy, not that tech-y, that purchased a Galaxy Note for note taking in classes. And i have a problem: the bottom android is a pain for note taking. So, while searching for a solution, I ended up here. Of course, one thing leads to another and after reading a few threads, I already realized that are other "tweaks" I would like to make to my tablet that I didn't even knew I wanted But let's go step by step.
I've been reading the samir_a excelent thread, Guide - Installing Firmware, CWM recovery & Rooting, that seems to be the beginning of everything (correct me if I'm wrong). And I'm convinced I know how to do it... how to root, how to install firmware, so on. What I don't understand is what these actions actually do. In other words, I don't understand most of these concepts - like "rooting", "firmware", "CWM", etc etc etc - so I ended up not getting the process. Sometimes I feel like you guys are speaking other language that not English.. So sorry if some of these questions are dumb...
- Root the device means getting access to do stuff that I can't do without that, correct? Like entering as "root" in Linux - you can do stuff that you can't with other users. Is that it?
- I read a lot that to move the navigation bar to the top of the device I need to root it. But is just that? I root the device and boom... the top bar is on the top?
- Is "install a firmware" the same as "install a ROM"? (meaning, is it like install a new operation system in the device)
- The CWM Recovery... what is it?? Is it like.. to create a system recovery image, or something??
- Lastly... does any of these - rooting, installing ROM, etc - void the manufacturer warranty? And if yes, is there any way to undo that in case something happens?
Once again, sorry if these are dumb questions (or don't even make sense). And thanks for your patience!
Cheers!!

mmascosta said:
Hi everyone!!
Quick introduction: I'm just a regular guy, not that tech-y, that purchased a Galaxy Note for note taking in classes. And i have a problem: the bottom android is a pain for note taking. So, while searching for a solution, I ended up here. Of course, one thing leads to another and after reading a few threads, I already realized that are other "tweaks" I would like to make to my tablet that I didn't even knew I wanted But let's go step by step.
I've been reading the samir_a excelent thread, Guide - Installing Firmware, CWM recovery & Rooting, that seems to be the beginning of everything (correct me if I'm wrong). And I'm convinced I know how to do it... how to root, how to install firmware, so on. What I don't understand is what these actions actually do. In other words, I don't understand most of these concepts - like "rooting", "firmware", "CWM", etc etc etc - so I ended up not getting the process. Sometimes I feel like you guys are speaking other language that not English.. So sorry if some of these questions are dumb...
- Root the device means getting access to do stuff that I can't do without that, correct? Like entering as "root" in Linux - you can do stuff that you can't with other users. Is that it?
Click to expand...
Click to collapse
Right!
mmascosta said:
- I read a lot that to move the navigation bar to the top of the device I need to root it. But is just that? I root the device and boom... the top bar is on the top?
Click to expand...
Click to collapse
No. But after rooting you may download and "install" (flash via CWM) a mod that does that.
mmascosta said:
- Is "install a firmware" the same as "install a ROM"? (meaning, is it like install a new operation system in the device)
Click to expand...
Click to collapse
Yes. Actually there is a difference between a rom an a kernel. Kernel is the core system adapted and customized to the model of your gadget, the Rom the user interface, simply spoken. Different roms may be based on the same kernel.
mmascosta said:
- The CWM Recovery... what is it?? Is it like.. to create a system recovery image, or something??
Click to expand...
Click to collapse
The stock recovery does not allow to flash custom roms, to make nandroid backups (full backups of your operating system / Rom / Kernel, CWM recovery does. But vou need to find the cwm that is made for your device!
mmascosta said:
- Lastly... does any of these - rooting, installing ROM, etc - void the manufacturer warranty? And if yes, is there any way to undo that in case something happens?
Click to expand...
Click to collapse
Yes an Yes! With a pc and Odin you can flash back to your original Rom your device was delivered with.
mmascosta said:
Once again, sorry if these are dumb questions (or don't even make sense). And thanks for your patience!
Cheers!!
Click to expand...
Click to collapse
If that helped, just press the thanks-button.

Thanks a lot for clarifying, charly-whiskey.
I'm trying to root, but as soon as I connect the tablet to the PC I get something different in ODIN.. I get not one, but two yellow squares in ID:COM section..
h*tp://img543.imageshack.us/img543/5894/captureokl.jpg (Sorry, I'm new here, so I can't add images...)
Why is that? May I proceed?

Have you got any other android devices attached to the PC?
Also you must be in download mode to flash with ODIN. You hold down power and volume down until the screen with the scary warning comes up, ignore it and push up volume to get to download mode.
ODIN should recognise your device.
Just a piece of advice, CHECK and DOUBLE-CHECK that partition is UNTICKED...
You can get into really hot water if you have this ticked...

ultramag69 said:
Have you got any other android devices attached to the PC?
Also you must be in download mode to flash with ODIN. You hold down power and volume down until the screen with the scary warning comes up, ignore it and push up volume to get to download mode.
ODIN should recognise your device.
Just a piece of advice, CHECK and DOUBLE-CHECK that partition is UNTICKED...
You can get into really hot water if you have this ticked...
Click to expand...
Click to collapse
Thanks! Yeah, I don't know what happened, but I unplugged and plugged again and it was ok. So I rooted and I think everything went fine.
I used Darkman's rooting method and checked that SuperSU was working. Then flashed his rom, and once again I think everything went fine. The weird thing is that the device seems not to be rooted anymore. I can't install anything that needs root access. SuperSU is installed, but when I go there, it says that no binary SU is installed.
Is this normal? What should I do? Root again?
I would ask in his thread, but the forum won't let me until I have 10 posts...
Thanks!

Just to let you know that I re-installed SuperSU through CWM and it's solved! In case it happens to anyone else

Related

[Q] I think I killed my Nexus S! Please help! (unlocking process/rooting stuff)

So, this is what has happened so far:
I googled for a small and easy to follow guide to unlock my phone so that I can later on install a custom rom. I followed the steps provided here:
http://nexusshacks.com/nexus-s-hacks/how-to-root-nexus-s/
What I didn't notice on the first place was the "UPDATE: DO NOT FOLLOW THIS GUIDE INSTEAD Please see new root method which works on all Nexus S and Nexus S 4G!" link. Don't ask why - really don't know.
The result was having my Nexus S stuck on a screen that shows Google logo on the middle and an unlocked padlock on the bottom.
It seemed, or to be exact, I figured out that, the problem was the .img file mentioned on some point in the middle of this.. tutorial.
So, I decided to follow the newer guide that can be found here:
http://nexusshacks.com/nexus-s-hacks/how-to-root-nexus-s-or-nexus-s-4g-new/
Although all went well (didn't have to go all over the same processes up to the .img installatin point), I ended up with the same screen that shows Google logo on the middle and an unlocked padlock on the bottom.
I figured out that I could just install a rom at this point, and decided that I should go back to stock. So, I followed this guide here:
http://nexusshacks.com/nexus-s-hacks/how-to-unroot-nexus-s-i9020ti9020ai9023/
But, when I choose to install the .zip file, I get this error:
assert failed: "getprop ("ro.product.device") == "crespo" || "getprop ("ro.product.device") == "crespo"
E: Error in /sdcard/i9020t_i9023.zip
(status 7)
Installation aborded
..let me add to this point that I have bought my Nexus S from EU, it is an i9023. Let me also add that all I wanted is to flash an ICS rom and I think I have ended with a f****d device I don't know what to do with!
Any help, really, would be so much appreciated since I need to use this phone. I have a backup for calls etc but I need some smartphone features!
I seriously doubt you killed your Nexus S. Temporarily disabled is more like it.
From off position, hold down Power + VOL-UP. You should be greeted with a screen with a green android and 4 options. If you can get there, that's the bootloader, and unless you manage to kill it (which is VERY hard to do), you can reflash everything from there via usb and adb.
What model Nexus S do you have? That's important for helping you to flash it.
nickmv said:
I seriously doubt you killed your Nexus S. Temporarily disabled is more like it.
From off position, hold down Power + VOL-UP. You should be greeted with a screen with a green android and 4 options. If you can get there, that's the bootloader, and unless you manage to kill it (which is VERY hard to do), you can reflash everything from there via usb and adb.
What model Nexus S do you have? That's important for helping you to flash it.
Click to expand...
Click to collapse
Yes, I can enter this menu - there already. My model is an i9023GSM.
OK, then you DONT have a dead phone. You just need to reflash it correctly.
I'm sorry I can't be helpful for longer, because I am at work,but follow this guide and make sure you follow every detail (take note of step 6 in particular).
I know it's a long guide, but it's VERY detailed, and should get you up and running.
On a side note, for ROM selection, are you looking for an Ice Cream Sandwich alpha ROM (android 4.0) (less stable) or the older Gingerbread ROMs (2.3.7)?
nickmv said:
OK, then you DONT have a dead phone. You just need to reflash it correctly.
I'm sorry I can't be helpful for longer, because I am at work,but follow this guide and make sure you follow every detail (take note of step 6 in particular).
I know it's a long guide, but it's VERY detailed, and should get you up and running.
On a side note, for ROM selection, are you looking for an Ice Cream Sandwich alpha ROM (android 4.0) (less stable) or the older Gingerbread ROMs (2.3.7)?
Click to expand...
Click to collapse
You gave me the good news so, thank you for that. Now, I should follow this guide and come back in case I have a problem.
As far as the rom, I wanted to flash an ICS since I cannot wait any longer for Google to release the official update. But right now, anything that can get my device up and running would be really good!
Edit: nvm. >_<
kijp15 said:
Why don't you just use shabby's one click root. Simple & much easier. Saves all sorts of troubles.
Click to expand...
Click to collapse
Will this solve the problem I'm facing? If yes, then it's fine by me.
Ok, just saw the edit, no worries!
nickmv said:
but follow this guide and make sure you follow every detail (take note of step 6 in particular).
I know it's a long guide, but it's VERY detailed, and should get you up and running.
Click to expand...
Click to collapse
OK, stuck already. On Part 2 what I understand is that I have to open the CMD and copy-paste the path to the "tools" folder? Because this is what I do, and after - since this is what I have understand - I type "fastboot oem unlock" and I get "'fastboot' is not recognized as an internal or external command,
operable program or batch file."
What do I do wrong?
EDIT:
Tottaly stuck on Part 2. It seems that there is no fastboot.exe file inside "tools" folder. I don't think the problem is something else - I'm sure I give the right commands since I tryied for fun another folder I have with fastboot.exe inside and it worked - to be exact it just gave me a FAILED messsage since device is already unlocked. Plus, regarding Part 3, Step 1, the first file for download is missing so I used the second link and downloaded 5023-cyan file. Hope this was a right move to do.
EDIT 2:
Ok, here is the story so far: I followed the guide given step by step. The USB drivers has been installed correctly so the device can be connected to the PC.
In the "tools" folder there was no such fastboot.exe file so I manually added one that I've found on the newer guide given on the 1st post. The unlocking process is failing because the device is already unlocked.
I did manage to install after this, the 5023-cyan.img file since this is the only link working from Part 3, Step 1. This gone well too!
Now, I couldn't go on with Part 4, I mean, I could not install the .zip file as it describes so through recovery mode I installed the .zip file succesfully (confirmation message to Nexus S screen).
I reboot and still get the same Google logo on the middle and an unlocked padlock on the bottom.
I cannot understand what I do so wrong? Oh, I'm so disappointed..
OK, people, head's up! I did manage to install the latest stable rom of cyanogenmod and the phone is up and running! It means that somehow everything went well! Now, how do I return back to OEM? Because I just need to make things as they where before..
..or should I give cyanogenmod a chance?
http://forum.xda-developers.com/showthread.php?t=1063664 or use ROM manager and select Stock ROM (you should then receive OTA upgrades to 2.3.6).
On the latter: You colud just back up different ROMs and switch between them using CW.
skatastamoutrasas said:
Will this solve the problem I'm facing? If yes, then it's fine by me.
Ok, just saw the edit, no worries!
Click to expand...
Click to collapse
If you are still facing problems. Try locking your bootloader again with this method. Then it will let you go back on stock. Use v3 it is stable solid and easy to use.
Nexus S + CM9 kangs = Awesomeness
mixtapes08 said:
If you are still facing problems. Try locking your bootloader again with this method. Then it will let you go back on stock. Use v3 it is stable solid and easy to use.
Nexus S + CM9 kangs = Awesomeness
Click to expand...
Click to collapse
Can you give me a CM9 kangs link since as new here, I'm kinda lost?
Ok new problem this time! After I installed my 3rd rom (probably, a totall noob thing to do) which was the OEM one, I tryied to re-enter recovery mode to wipe all data and re-install the rom I want. But now I get this mark of the small green android with a big exclamation mark on top of his head. What is this new hell that found me?
skatastamoutrasas said:
Ok new problem this time! After I installed my 3rd rom (probably, a totall noob thing to do) which was the OEM one, I tryied to re-enter recovery mode to wipe all data and re-install the rom I want. But now I get this mark of the small green android with a big exclamation mark on top of his head. What is this new hell that found me?
Click to expand...
Click to collapse
Try re-flashing the recovery. Either threw rom manager or fastboot.
Fastboot flash recovery "nameofrecovery".img
kijp15 said:
Try re-flashing the recovery. Either threw rom manager or fastboot.
Fastboot flash recovery "nameofrecovery".img
Click to expand...
Click to collapse
Worked just fine! Thank you!
skatastamoutrasas said:
OK, people, head's up! I did manage to install the latest stable rom of cyanogenmod and the phone is up and running! It means that somehow everything went well! Now, how do I return back to OEM? Because I just need to make things as they where before..
..or should I give cyanogenmod a chance?
Click to expand...
Click to collapse
Nice, glad to see you managed to get it working. Honestly, the hassle is kind of worth it, because you learn more about the process anyways.
That being said, give CyanogenMod a chance. There's also several other ROMs. Unless you need stock OS for warranty service, I'd recommend going with one of the many custom ROMs we have here.
There are several minimalistic AOSP-built ROMs that mimic the feel of the stock OS, but are optimized for speed, and still have some very nice tweaks that you may enjoy. Just take a look through the dev section, and you'll see we have tons of options.
nickmv said:
Nice, glad to see you managed to get it working. Honestly, the hassle is kind of worth it, because you learn more about the process anyways.
That being said, give CyanogenMod a chance. There's also several other ROMs. Unless you need stock OS for warranty service, I'd recommend going with one of the many custom ROMs we have here.
There are several minimalistic AOSP-built ROMs that mimic the feel of the stock OS, but are optimized for speed, and still have some very nice tweaks that you may enjoy. Just take a look through the dev section, and you'll see we have tons of options.
Click to expand...
Click to collapse
It did worth the hassle, that's for sure. Now I think it's so easy to unlock a Nexus plus I now have a little more knowledge regarding Android .
I will stick with CM 2.3.7 as it looks just fine. I don't care about warranty, I don't think I will ever need the official service for a software issue. Now I have to re-install my apps, re-sync my accounts and setup the phone the way I want it. It will take a little more time.
But I'm glad that I pulled this through - with your help of course! Guys, you rock!
I wish that I'll be as helpful as you at the near future.
Today's latest CM9/ICS kang is here
I'd also recommend getting a custom kernel.
For batt life, morfic's SEUV kernel.
For reg performance, perhaps Matrix's kernel
MAKE SURE THAT YOU HAVE CLOCKWORKMOD PERMANENTLY INSTALLED BEFORE DOING THIS. It saves time if you mess up. Also, make sure you get the latest gapps HERE
Instructions:
1. Go to clockwork recovery
2. Select data/factory reset/wipe
3. Select clear cache as well
4. Adv Mounts and Storage > wipe /system (note, this wipes android off the phone. It's a good idea since youre going from ver 2.x to 4.x)
5. Choose "flash from zip" (or whatever it's called.....NOT flash from update.zip)
6. Flash the cm9 update file first, then flash the kernel of your choice, then flash the gapps file.
7. Back out of the menu and select reboot.
Take note though, that the new ICS OS has incompatibilities with certain apps while GPU rendering is turned on, etc. It'll prob reboot on you sometimes, etc. For the most part it's stable, but that's completely subjective.
If you do run ICS, make sure you turn on GPU rendering in Dev Options. It takes full advantage of the GPU for UI animations, etc. Sometimes there's a stray app here and there that doesnt play nice, and you'll notice if the window looks really tiny or funny. Turning it off will fix the problem.
nickmv said:
Today's latest CM9/ICS kang is here
I'd also recommend getting a custom kernel.
For batt life, morfic's SEUV kernel.
For reg performance, perhaps Matrix's kernel
Click to expand...
Click to collapse
Two questions:
The link you give me to download the ICS rom keeps loading for ever. So, I choosed this one instead:
http://forum.xda-developers.com/showthread.php?t=1356228
Right or wrong thing to do?
It it essential to install a custom kernel? I ask because I forgot to copy/paste the .zip file and due to lack of time, I procceded without it, installing the ROM and G-APPS.

[Q] Rooted but CMW not working

Hello, i've got a prob. I have rooted my Tab 7.0plus and have installed SU, titanium backup and and Rom Manager (Full Version)
I can back up my through Titanium fine but I just cant get CWM to work as it should. If I choose Backup existing Rom, it asks for confirmation then the phone shuts down but instead of going ito recovery it just reboots.
Same thing happens if I choose reboot into recovery.
I can't get into recovery by pressing and holding power and vol- either
Any ideas? I am a Novice so please be gentle.
Cheers
what variant of GT+ do you have?
Root != CWM
You need to actually install CWM. Read the Development thread on it, and spend some time searching, because if you don't and post a dumb question in gary's thread, he WILL bust out the flamethrower. Just spend a day or two reading through threads and Googling before posting or flashing anything and you should be fine.
Also - Don't use ROM Manager, it causes problems on many devices. ROM Manager != CWM.
I followed the instructions to the letter! I know I have root su grants permissions but there is no way to get into recovery. I cant back up or restore what other recovery would you experts suggest? wi-fi 62100
Which instructions did you follow? link?
How do you know you have 'su' permissions? Have you installed the 'superuser' application from the market? Does it work?
"Backup from existing ROM" is _NOT_ an option from within CWM Recovery. It's an option from within "ROM Manager" (which is an application by CWM.) CWM Recovery is a completely different boot mode of the tablet.
Please don't use ROM Manager on this tablet. It won't work and the results might be interesting.
If you don't want to fiddle with volume up/down and power buttons to get into recovery, I'd suggest a nice little app in the android market called "Quick Boot." It also requires the tablet is rooted (and superuser is installed), but will let you reboot directly into recovery.
After you've booted into recovery, the screen will be black with text on it. It won't be the "tablet experience" you might be used to. The banner might include something like "CWM-based Recovery." If so, you are really in CWM Recovery. If it says something like "Android system recovery (3e)", you don't have CWM Recovery installed.
Now, I'm going to try and be friendly here. That's something hard for me. Just ask around and people will tell you that all devs are Divas or something. (I prefer to think of myself as more sarcastic than diva.. but whatever.)
Advice:
Don't install CWM Recovery (or ROM Manager) on your tablet. You aren't ready. That isn't insulting - but it's honest. You don't go sky diving before you learn how to wear a parachute. Search for topics like "ODIN" so you know how to restore your tablet if you screw things up or you want to get back to a factory state for some reason. Even ask around here for links to threads that give a good intro to "ODIN", "Recovery" and other android "hacking" topics.
(Surely someone has typed up a good thread on that stuff somewhere for some device... haven't they? I realize that a search would be too broad to get any reasonably usable results.)
After you feel comfortable with destroying your tablet and bringing it back from the dead, check the thread in my signature titled "CWM-based Recovery for the Samsung Galaxy Tab 7.0 Plus GT-P6210"
Take care
Gary
Thanks Gary but i'm afraid it's knackered. I just got a black screen and it wont boot or go into recovery or anything. It's a shame though it took me ages to save up for it.
Now is the time to go into ODIN... You can probably get the device into download mode and reflash it...
Good luck
Gary
Thanks mate, fixed it. you saved my bacon!
nixey55 said:
Thanks mate, fixed it. you saved my bacon!
Click to expand...
Click to collapse
I had nothing whatsoever to do with your bacon.

[Q] Clockworkmod warns: "bad recovery" - What to do?

Hello guys,
a few days ago I dared to root my Xperia X10 Mini Pro with SuperOneClick and flashed a Cyanogenmod 7 Android 2.3.3 ROM. All in all, it worked pretty well.
After doing some apps installation stuff I rebooted in the Recovery (Clockworkmod which obviously came along with the ROM) and made a backup, just for the case. Afterwards, I selected "power off" in the CWM menu because I wanted to go to bed.
Then, immediately, CWM said something like "Error - This recovery seems to be bad" and something with a "risk". I managed however to power off. Can't remember if that worked via CWM or if I pushed the power off hardbutton or removed the battery.
Yet - the ROM seems to work. Now I'm a bit anxious because of the CWM error.
Is there really a risk? I planned to dare unlocking the bootloader soon. Is it dangerous to do this with a "bad recovery" or doesn't that matter at all?
Is there a possibility to repair CWM? Can I just install a new CWM? If yes - how?
Sorry - pretty noobish questions, I know.
Can you help me anyway?
Thanks a lot!
deleted post
Thank you for your help! I already thought that no one would answer because the thread disappered on page 3 of this forum
I've never heard from Odin before and therefore googled it. It only occured in connection with Samsung devices. Are you sure it is compatible to my Sony Ericsson?
Anyway, can I also install a new CWM via ROM Manager or wouldn't you recommend this?
Warning: I'm a noob. Take my advice at your own risk!
From what I understand, flashing CWM via Rom Manager is exactly the same as manual flashing (perhaps better, since the Rom Manager presumably keeps up to date). So I think you should be able to do so and make another recovery (without going through any of that manual flashing stuff). You should get a second opinion just because I'm so noobish, but I think this is the case.
However, from my limited understanding, I don't think the recovery will make any difference when dealing with the bootloader. The bootloader is, more or less, the very first set of instructions executed when the phone turns on. If you mess that up, your phone won't even be able to get into recovery mode. Also, the recovery images are stored on your sd card, which is wiped upon unlocking. Once again, I could be wrong.
deleted post
Dude, what are you talking about? You can't use ODIN on a non-Samsung phone.
trich025 said:
don't use rom manager just use the odin for your safety, you can bet that samsung users are the one benefiting on odin but as you can see erricson and samsung are both android phones and if you examine them both device have similar programs, and one thing, always keep in mind that you have to back up your current rom for emergency uses so you can still get back to were you started in case something went wrong.
if i helped you with this problem you could click the thanks button >>>>
Click to expand...
Click to collapse
OK now this is flat out wrong. Each Android device has a different program used. Samsung has Odin, HTC has an RUU. Not sure about SE. But never use a software made for one device on another unless you want a brick. Just because they both use android doesn't mean they are the same.
Thanks to everyone, especially Product F(RED)!
No offence, trich025, but I guess you were wrong.
Can I destroy something by re-installing or updating CWM via ROM-Manager just in case my CWM has a bug?

[Q] LG Motion (Possible Cyanogen mod?)

Hey everyone! I would like to start off by saying that I am brand new here, and am surely going to mess up quiet alot... But here goes,
I've recently rooted my phone with a very simple guide, and it's the first device I've every rooted. So I know very little of the process of doing so, (I'm learning slowly).
I also have found a rom that I would like to install, but I would love to know if others think it seems legit? If it is real, I know many people would absolutely love to use it! The rom's URL is (ht tp:// playfuldroidz.com /wiki/ CyanogenMod_10_Motion) (Please remove spaces, sorry as I said i'm new...)
Now I don't mind testing this myself, but being as new as I am at android I honestly do not know how to follow the relatively simple instructions.
(This Is where I need some help, Please be noob cautious!)
Download the .zip & copy to phone or sdcard (make sure 4g or wifi is enabled if dl'd from phone).
Zip can be installed from either internal or external sd in CWM (Which ever you copied it too!)
MAKE A BACKUP!!!
DO A FACTORY RESET!!! - this will wipe data & cache!
Go to install zip from sdcard
Choose zip from sdcard
Select cm-10-xxxxxxxxxx-UNOFFICIAL-l0.zip
Confirm
Repeat Steps 5 -8 for gapps
Reboot
Now my first question I'd love some help with, is how do I perform this backup there talking about? do they just mean my simple go into settings and click backup? Or should I do it some otherway?
Second question: Do they mean the phones built in service of factory reset?
Third Question: To install a Zip from an SD card do I need to simply use ES file explorer, or root file browser? Or is there a custom way to install a Zip file on android?
Fourth and final Question: What is gapps..? Is this something I should get or use?
EDIT: I've got a fifth one also... Thanks to anyone who's stayed this long and is willing to help me.! Will this Cyanogen mod (If working) Work almost exactly like a real nexus Operating system? I've got a nexus 7 tablet running stock android, and I love it! That's why I'm doing this to my phone honestly.
Thank you all greatly!
Prophet968 said:
Hey everyone! I would like to start off by saying that I am brand new here, and am surely going to mess up quiet alot... But here goes,
I've recently rooted my phone with a very simple guide, and it's the first device I've every rooted. So I know very little of the process of doing so, (I'm learning slowly).
I also have found a rom that I would like to install, but I would love to know if others think it seems legit? If it is real, I know many people would absolutely love to use it! The rom's URL is (ht tp:// playfuldroidz.com /wiki/ CyanogenMod_10_Motion) (Please remove spaces, sorry as I said i'm new...)
Now I don't mind testing this myself, but being as new as I am at android I honestly do not know how to follow the relatively simple instructions.
(This Is where I need some help, Please be noob cautious!)
Download the .zip & copy to phone or sdcard (make sure 4g or wifi is enabled if dl'd from phone).
Zip can be installed from either internal or external sd in CWM (Which ever you copied it too!)
MAKE A BACKUP!!!
DO A FACTORY RESET!!! - this will wipe data & cache!
Go to install zip from sdcard
Choose zip from sdcard
Select cm-10-xxxxxxxxxx-UNOFFICIAL-l0.zip
Confirm
Repeat Steps 5 -8 for gapps
Reboot
Now my first question I'd love some help with, is how do I perform this backup there talking about? do they just mean my simple go into settings and click backup? Or should I do it some otherway?
Second question: Do they mean the phones built in service of factory reset?
Third Question: To install a Zip from an SD card do I need to simply use ES file explorer, or root file browser? Or is there a custom way to install a Zip file on android?
Fourth and final Question: What is gapps..? Is this something I should get or use?
EDIT: I've got a fifth one also... Thanks to anyone who's stayed this long and is willing to help me.! Will this Cyanogen mod (If working) Work almost exactly like a real nexus Operating system? I've got a nexus 7 tablet running stock android, and I love it! That's why I'm doing this to my phone honestly.
Thank you all greatly!
Click to expand...
Click to collapse
Question 1,2 and 3.. they are all done through Clockworkmod. Look through the menus you'll see it if you still struggle look on YouTube.
Question 4.. gapps is Google Apps you need to flash this after the ROM to get the play store and all the other standard Google apps.
Question 5.. in your eyes pretty much, it'll look the same but with more features obviously.
Thank you alot!
Thanks! now i've only gotta do one last thing, and see if anyone knows whether or not this website is a reliable source, or atleast if the mod works...
Prophet968 said:
Thanks! now i've only gotta do one last thing, and see if anyone knows whether or not this website is a reliable source, or atleast if the mod works...
Click to expand...
Click to collapse
Just give it a go mate, if in doubt try it out lol (don't quote me on that haha)
Alright I've got one last dumb question
CdTDroiD said:
Just give it a go mate, if in doubt try it out lol (don't quote me on that haha)
Click to expand...
Click to collapse
I was just wondering if there's a chance this clock work mod thing doesn't work on my phone? I don't really know how, or where it is either... and I'd love some help with that... Thank you!
(Edit) I don't think there is a clockwork mod for my device... According to the Rom Manager app I was told to use for installing it.
Prophet968 said:
I was just wondering if there's a chance this clock work mod thing doesn't work on my phone? I don't really know how, or where it is either... and I'd love some help with that... Thank you!
(Edit) I don't think there is a clockwork mod for my device... According to the Rom Manager app I was told to use for installing it.
Click to expand...
Click to collapse
If you did what it said in the instructions *root it, cwm, install custom rom* then after installing the custom rom it has it's own cwm. turn off the phone, turn in back home and press the back and home button together at the same time and it should take you to the rom's cwm. If the phone does a factory reset by pressing the back and home button then you did the installation wrong.
But just in case I'll setup a full instruction for you.
Root your phone.
Which can be done easily, just download this and extract the files: http://www.mediafire.com/?dhdbwflnl1vknx2
once you extract the files put your phone on debugging mode which can be done by going to settings, developer mode, and click usb debug.
once you've done that connect your phone to the pc *make sure it's on charge only* wait for driver installation to finish. once that's done click root. follow instructions on the screen it shouldn't be too hard! after following instructions you should be rooted and have cwm. but to install the recovery go to your apps and find lte 2nd init recovery and then click the top button, agree to super su to use it and you're done with rooting and cwm! now. these files you were talking about, download them and put them on sd which can be done with a file manager. after they've downloaded go to the lte 2nd init and click the bottom button. it will reboot the phone and take you to cwm. While you are in cwm click on the home button to go to external which is the sd, then go to backup and restore, and click backup! this is very important. miss this step and things could go bad. Now all you have to do is follow the instructions you posted yourself and you should be done! if you need any help don't hesitate to message me. I've done this for a long time now.
Whoops forgot to add. the website IS a reliable source. Learned that cause I'm a risk taker and decided to try it out myself. and do not use rom manager or anything like that for recovery. ever. especially on phones that do not have their own recovery mode. also. the CM10 works great in my opinion! But there's a catch. for me at least. even though everything is perfect during phone calls I cannot use my 4g. which is a bad thing for me cause I need it. other than that if that doesn't bother you or anything or don't have service then knock yourself out and install the cm10!
COMPLETED) This mod worked, all things are now finished except one small issue!
So after installing the mod with some great help of someone here on this forums, I've been basically beta testing the mod for a few days. I have nearly no complaints, as almost everything works seemlessly just like you'd except the operating system to. In the end I found one single issue though, which is terribly annoying for me in specific...
My GPS isn't working, which could be one of many things other than the rom. Seeing as I only recognized It yesterday, there may be an outside reason it at random shut off. If anyone know's what can cause this, and a fix for it please comment back!
Thanks to everyone who helped with installing the mod
Check out www.unleashedprepaids.com. have whole section on lg motion custom ROMs help guides everything u need!
Sent from my LG-MS770 using Tapatalk 4
Please help me with the rom
Hey guys not sure if i am suppose to post this here but i couldnt find any where else and i couldnt find an answer with my exact problem, i installed this rom on my moms lg motion and everything went find untill i got to gapps it came up with an error inside of cwm so i just contined all the other flashes i had to do and rebooted i thought that i could just flash gapps later. But i mad a very big booboo i installed the Recovery APK for it in cm 10 i forgot all about pressing reboot and saying reboot into revocovery so i was going to try it though the Recovery APK so i installed the thing and pressed reboot and instead of taking me into recovery it takes me to a screen that says something like "mourning call error" which i dont know what means but i had to take out the battery and turn the phone back on so that worked and i got back to the home screen but i still cant install gapps so she can use all the google sevices i tried rebooting with the built in reboot into recovery (the one that you press reboot when you hold the power button) and that does the same exact thing i have no way of flashing gapps or anything else for that matter can someone please help me i have no idea what to do. everything i working on the phone but that. thank you sorry if i put this in the wrong place.
Confused my droid using this method- would love in on this thread
Sorry if I'm posting in the wrong place-punch me if I have-
I rooted my lgms770 with version f firmware- installed cwm and 2ndinit recovery (2nd init was the only known way (to me anyway) to get into cwm at the time) followed this guide ---
[LgMotion All Things root] and
[GUIDE] Unbrick OR Unroot LG Motion 4G [KDZ] - Android Forums
I am not allowed to post urls yet...sorry...its the the first google hit
I've tried multiple versions of the official LG Firmware flash, from the website, and by following this guide-
AOKP Dirty Unicorns baseless port cm10 - Android Forums Actually, its the unicorns that got me.
With no luck there. I am running Mint16, and had to run the programs through Wine of course, then tried Q4wine, and eventually tried running though Oracle VM, and finally, I wiped my ancient dell of Linux altogether and put WinXP back on it (took 2 hours, that). No cigar. And yes, I did the drivers, all in order, etc, tried again, reinstalled etc
I finally set up adb to try to get into this droid that way, but am having problems with port permissions (I'm going to guess that's on my pc's end-running Mint16)
I can access the factory reset screen (the black and white), download mode, and the battery charges on a black screen with a nice purple font, but I am still stuck in a bootloop. I've employed all known button spamming combos to get back into cwm (there is a nandroid in there somewhere)..but alas...
Help me Obi-Wan-Kenobi's..
Peach
I had the purple letters with no way to get to the factory reset screen i just used the lg online flash tool in upgrade recovery put in the imei of the phone in made sure the phone was in usb download mode then it was fixed but for some odd reason i still cant get my phone to the factory reset option. I apologize sincerely if I wasn't detailed enough if you need any clarification on it then let me know through pm or i could even send u a link to my box folder i keep the install files in.
(Also i have a one click root app for the LGMS770 So if you or anyone would like the link i would be happy to give it to you)
Sent from my MetroPCS LG-MS770 using Tapatalk

Already rooted Samsung J5 - general inquiry

Hello guys. I just bought a used Samsung Galaxy J5 (SM-J500FN) with android version 5.1.1. The previous owner told me that it is rooted. Nothing seems weird with the phone other than when i try to factory reset it it takes me to a "bios" kind window where i have to manually choose to delete all data (hard delete i think its called), that and when i normally turn on the phone, at the top left corner it says "set warranty bit kernel". I was just wondering how do i go about installing custom roms since its already rooted, and can i unblock the default carriers (T-mobile) block for other sim cards. When asked how he rooted it (what method was he using) he said he just used Odin. I dont know much about rooting so, whatever you can tell me as to the handling of the phone would be amazing. Any other guides to installing some custom roms and making the phone easier and faster ( i only want functionality, don't care much about the UI) would be greatly appreciated. Thanks in advance.
luan96 said:
Hello guys. I just bought a used Samsung Galaxy J5 (SM-J500FN) with android version 5.1.1. The previous owner told me that it is rooted. Nothing seems weird with the phone other than when i try to factory reset it it takes me to a "bios" kind window where i have to manually choose to delete all data (hard delete i think its called), that and when i normally turn on the phone, at the top left corner it says "set warranty bit kernel". I was just wondering how do i go about installing custom roms since its already rooted, and can i unblock the default carriers (T-mobile) block for other sim cards. When asked how he rooted it (what method was he using) he said he just used Odin. I dont know much about rooting so, whatever you can tell me as to the handling of the phone would be amazing. Any other guides to installing some custom roms and making the phone easier and faster ( i only want functionality, don't care much about the UI) would be greatly appreciated. Thanks in advance.
Click to expand...
Click to collapse
For starters, I'd head over the J5 forum
Galaxy J5 Forums
Or here's a great post that includes a lot of stuff to get started on reading:
https://forum.xda-developers.com/galaxy-j5/how-to/galaxy-j5-root-twrp-roms-news-tips-t3620892
But the basics are: To flash a custom ROM, research what a custom recovery is, how to flash a custom recovery to your phone model and after that, flashing a custom ROM is as easy as loading the .zip file to your SD card and selecting it in the custom recovery.
I'd also research on how to flash to stock, as this is a life-saver in case you accidentally do something wrong. Pretty much you need to know how to flash via Odin (yes, learning how to use Odin is important to us Samsung users).
Don't worry though, it's not that big of a pain, Odin is pretty easy to learn
ShaDisNX255 said:
For starters, I'd head over the J5 forum
Galaxy J5 Forums
Or here's a great post that includes a lot of stuff to get started on reading:
https://forum.xda-developers.com/galaxy-j5/how-to/galaxy-j5-root-twrp-roms-news-tips-t3620892
But the basics are: To flash a custom ROM, research what a custom recovery is, how to flash a custom recovery to your phone model and after that, flashing a custom ROM is as easy as loading the .zip file to your SD card and selecting it in the custom recovery.
I'd also research on how to flash to stock, as this is a life-saver in case you accidentally do something wrong. Pretty much you need to know how to flash via Odin (yes, learning how to use Odin is important to us Samsung users).
Don't worry though, it's not that big of a pain, Odin is pretty easy to learn
Click to expand...
Click to collapse
That's what I love about Samsung, as long as you have your ducks in a row, the files and tools are extremely easy to use, a 4 year old could do it.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
ShaDisNX255 said:
For starters, I'd head over the J5 forum
Galaxy J5 Forums
Or here's a great post that includes a lot of stuff to get started on reading:
https://forum.xda-developers.com/galaxy-j5/how-to/galaxy-j5-root-twrp-roms-news-tips-t3620892
But the basics are: To flash a custom ROM, research what a custom recovery is, how to flash a custom recovery to your phone model and after that, flashing a custom ROM is as easy as loading the .zip file to your SD card and selecting it in the custom recovery.
I'd also research on how to flash to stock, as this is a life-saver in case you accidentally do something wrong. Pretty much you need to know how to flash via Odin (yes, learning how to use Odin is important to us Samsung users).
Don't worry though, it's not that big of a pain, Odin is pretty easy to learn
Click to expand...
Click to collapse
Thank you, ill be sure to check them out. Although, i would like to do the entire process from the beginning (root it again myself since i have no idea what the previous owner has done) and then try to install custom roms and other cool features rooting offers. I read that the KNOX security on samsung phones can pose some problems, any thoughts on that ?
Thank you again for your response.
ShaDisNX255 said:
For starters, I'd head over the J5 forum
Galaxy J5 Forums
Or here's a great post that includes a lot of stuff to get started on reading:
https://forum.xda-developers.com/galaxy-j5/how-to/galaxy-j5-root-twrp-roms-news-tips-t3620892
But the basics are: To flash a custom ROM, research what a custom recovery is, how to flash a custom recovery to your phone model and after that, flashing a custom ROM is as easy as loading the .zip file to your SD card and selecting it in the custom recovery.
I'd also research on how to flash to stock, as this is a life-saver in case you accidentally do something wrong. Pretty much you need to know how to flash via Odin (yes, learning how to use Odin is important to us Samsung users).
Don't worry though, it's not that big of a pain, Odin is pretty easy to learn
Click to expand...
Click to collapse
Also, i use Linux so i hear the alternative to Odin is Heimdall, anyone have any experience with it, or should i just do it on a Windows PC?
luan96 said:
Also, i use Linux so i hear the alternative to Odin is Heimdall, anyone have any experience with it, or should i just do it on a Windows PC?
Click to expand...
Click to collapse
I've got no experience with Linux, sorry. SuperSU disables knox so there's nothing to worry about.
luan96 said:
Also, i use Linux so i hear the alternative to Odin is Heimdall, anyone have any experience with it, or should i just do it on a Windows PC?
Click to expand...
Click to collapse
If you're a Linux user and you have knowledge of using terminal commands then you should have no trouble setting up Hiemdall. Getting full USB functionality set up for the device in Hiemdall can be a pain if you aren't familiar with that kind of thing.
But, having a Windows PC will make a lot of things very simplified for you. A Windows/Linux dual boot system would be very handy to you if you can set that up. Then you could also use Kies/SmartSwitch if it ever comes to a point that you need it.
There are some handy rarely used instances with Linux when it comes to Samsung. They have no fastboot like other devices so only adb is usable. I think they primarily centered around Windows being the preferred OS to interact with their devices.
Droidriven said:
If you're a Linux user and you have knowledge of using terminal commands then you should have no trouble setting up Hiemdall. Getting full USB functionality set up for the device in Hiemdall can be a pain if you aren't familiar with that kind of thing.
But, having a Windows PC will make a lot of things very simplified for you. A Windows/Linux dual boot system would be very handy to you if you can set that up. Then you could also use Kies/SmartSwitch if it ever comes to a point that you need it.
There are some handy rarely used instances with Linux when it comes to Samsung. They have no fastboot like other devices so only adb is usable. I think they primarily centered around Windows being the preferred OS to interact with their devices.
Click to expand...
Click to collapse
Thank you for the info. I already have a dual boot on my pc with windows. I am an experienced Linux user and setting up Hiemdall should not pose a problem, but i opted to go for Windows since as you said makes things simpler.
Still looking for guides and tutorials on how exactly the root process goes. Doing research, so i guess its going to be a late night. If you have any links or pages you can guide me to for my Samsung J5 it would be amazing. Right now am looking around this forum and wherever the links lead me.
Thank you again.
luan96 said:
Thank you for the info. I already have a dual boot on my pc with windows. I am an experienced Linux user and setting up Hiemdall should not pose a problem, but i opted to go for Windows since as you said makes things simpler.
Still looking for guides and tutorials on how exactly the root process goes. Doing research, so i guess its going to be a late night. If you have any links or pages you can guide me to for my Samsung J5 it would be amazing. Right now am looking around this forum and wherever the links lead me.
Thank you again.
Click to expand...
Click to collapse
First, just to make sure that you are not walking blindly into some potential traps.
1) download the root checker app from Playstore, use it to verify whether the device is actually rooted.
2) power the device off, wait 5 seconds, hold volume up+home+power, when it boots past the logo, let go. It should boot to recovery, tell me what you see. Does it say TWRP with grey buttons on a black screen? Or does it have an android lying on his back and have options listed?
3) verify whether or not the bootloader is unlocked or not on your specific device model number with your specific build number/android version, if it's locked it will create problems if you try to flash custom recovery. Though you can flash CF autoroot with locked bootloader.
Then I'll help find what you need to do what you are looking to do. It may be simpler than you think.
If he in fact used Odin and the device is rooted, he did one of three things.
1) flashed custom recovery(TWRP) via Odin then flashed SuperSU.zip to root, not possible with locked bootloader.
2) flashed CF auto root via Odin, potentially leaving stock recovery if your bootloader is locked.
3) flashed a pre-rooted stock firmware via Odin, not likely though.
The first 2 being more likely than the last one, the second one being the most likely if your bootloader is locked.
Edit: @luan96, edited for more information.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
@Droidriven Thank you for the info. After a rough night of research i realized what i need to do. According to root checker, my phone is not rooted, and the recovery seems to be stock. This is very weird, since the phone is obviously not just the stock version that came from T Mobile. Im guessing its probably a badly done root or one that was removed. Anyways, this is how i am planing to proceed:
1. Turn on OEM Unlocking and USB Debugging from developer versions
2. Download CM Autoroot for my specific phone ( i do not know what is the difference between "normal" root and autoroot, but autoroot seems to be simpler and offers the same thing. Please correct me if i am wrong, i would love to know how to do a manual root as well if it has more benefits).
3. Volume down+home+power to get to the download screen
4. Launch Odin that comes with the autoroot package
5. Plug my phone into the USB and wait for Odin to add it.
6. Select the autoroot md5 file from the folder and begin the flashing process
7. Hope for the best and that my phone is still functional when it auto reboots.
After this i should check with Root Checker weather its properly installed or not. If it is, and i see the SuperSU application i continue to installing the custom recovery ( through some research i found out that TWRP is the best choice for me). Installing the custom recovery should be as easy as auto rooting the device. I should download the files from an official website, and flash them using the same process i did for AutoRoot.
After that its mod heaven. With my understanding so far, TWRP lets me install custom roms, and other things i might need.
This is what i plan on doing as soon as im done with a little more research. If anyone has any tips, corrections or general information on what to expect or do please share.
Many thanks to every contributor on this thread.
luan96 said:
@Droidriven Thank you for the info. After a rough night of research i realized what i need to do. According to root checker, my phone is not rooted, and the recovery seems to be stock. This is very weird, since the phone is obviously not just the stock version that came from T Mobile. Im guessing its probably a badly done root or one that was removed. Anyways, this is how i am planing to proceed:
2. Download CM Autoroot for my specific phone ( i do not know what is the difference between "normal" root and autoroot, but autoroot seems to be simpler and offers the same thing. Please correct me if i am wrong, i would love to know how to do a manual root as well if it has more benefits).
3. Volume down+home+power to get to the download screen
4. Launch Odin that comes with the autoroot package
5. Plug my phone into the USB and wait for Odin to add it.
6. Select the autoroot md5 file from the folder and begin the flashing process
7. Hope for the best and that my phone is still functional when it auto reboots.
After this i should check with Root Checker weather its properly installed or not. If it is, and i see the SuperSU application i continue to installing the custom recovery ( through some research i found out that TWRP is the best choice for me). Installing the custom recovery should be as easy as auto rooting the device. I should download the files from an official website, and flash them using the same process i did for AutoRoot.
After that its mod heaven. With my understanding so far, TWRP lets me install custom roms, and other things i might need.
This is what i plan on doing as soon as im done with a little more research. If anyone has any tips, corrections or general information on what to expect or do please share.
Many thanks to every contributor on this thread.
Click to expand...
Click to collapse
I would recommend using the command line to flash the twrp instead of the GUI if you want a simple process in linux
Run a terminal as a superuser (sudo)
heimdall flash –RECOVERY filename.img
Do step 1 and 3 you gave before before doing this
Or just flash the twrp image using Odin
J500FN twrp
https://dl.twrp.me/j5nltexx/
-Hope- said:
I would recommend using the command line to flash the twrp instead of the GUI if you want a simple process in linux
Run a terminal as a superuser (sudo)
heimdall flash –RECOVERY filename.img
Do step 1 and 3 you gave before before doing this
Or just flash the twrp image using Odin
J500FN twrp
https://dl.twrp.me/j5nltexx/
Click to expand...
Click to collapse
I'm going to use Odin for this. Since I'm quite new to the rooting community I dont want to mess things up on the first try. I'd rather get comfortable with some standard stuff before I proceed to try different variations. Thank you for your input. Though I would still like to know if I should use cm auto root or do a manual root. The difference is not quite clear to me yet. Again, thank you for your input, it is appreciated.
luan96 said:
@Droidriven Thank you for the info. After a rough night of research i realized what i need to do. According to root checker, my phone is not rooted, and the recovery seems to be stock. This is very weird, since the phone is obviously not just the stock version that came from T Mobile. Im guessing its probably a badly done root or one that was removed. Anyways, this is how i am planing to proceed:
1. Turn on OEM Unlocking and USB Debugging from developer versions
2. Download CM Autoroot for my specific phone ( i do not know what is the difference between "normal" root and autoroot, but autoroot seems to be simpler and offers the same thing. Please correct me if i am wrong, i would love to know how to do a manual root as well if it has more benefits).
3. Volume down+home+power to get to the download screen
4. Launch Odin that comes with the autoroot package
5. Plug my phone into the USB and wait for Odin to add it.
6. Select the autoroot md5 file from the folder and begin the flashing process
7. Hope for the best and that my phone is still functional when it auto reboots.
After this i should check with Root Checker weather its properly installed or not. If it is, and i see the SuperSU application i continue to installing the custom recovery ( through some research i found out that TWRP is the best choice for me). Installing the custom recovery should be as easy as auto rooting the device. I should download the files from an official website, and flash them using the same process i did for AutoRoot.
After that its mod heaven. With my understanding so far, TWRP lets me install custom roms, and other things i might need.
This is what i plan on doing as soon as im done with a little more research. If anyone has any tips, corrections or general information on what to expect or do please share.
Many thanks to every contributor on this thread.
Click to expand...
Click to collapse
Flashing CF autoroot will simplify rooting, again, just make sure you have the correct autoroot for your specific model number and firmware, flashing the wrong one can softbrick or hardbrick your device, this would require flashing stock firmware via Odin to repair if softbricked and more serious methods to restore if hardbricked. There isn't much difference in effect with the different rooting methods. They all get the job done about equally.
Just make sure that you verify that your bootloader is in fact unlocked BEFORE you flash TWRP. As stated earlier, if it is locked, it will certainly cause issues and you'll have to restore stock recovery and/or stock firmware.
As long as your bootloader is unlocked then your outlined plan should be good to go.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Droidriven said:
Flashing CF autoroot will simplify rooting, afain, just make sure you have the correct autoroot for your specific model number and firmware, flashing the wrong one can softbrick or hardbrick your device, this would require flashing stock firmware via Odin to repair if softbricked and more serious methods to restore if hardbricked. There isn't much difference in effect with the different rooting methods. They all get the job done about equally.
Just make sure that you verify that your bootloader is in fact unlocked BEFORE you flash TWRP. As stated earlier, if it is locked, it will certainly cause issues and you'll have to restore stock recovery and/or stock firmware.
As long as you're bootloader is unlocked then your outlined plan should be good to go.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
Well, looks like i messed up somehow. I was fiddling around the recovery mode and Odin mode. Those were the only two screens i could view besides normal booting, so i was looking for any info.
Recovery Mode https://ibb.co/hotYZ5
Odin mode 1 https://ibb.co/nFfVE5
Once on the recovery mode, i selected "reboot to bootloader" hoping to find info if its locked or not. I got redirected to this screen
Odin Mode 2 https://ibb.co/kqhtZ5
And then i did what i think is the dumbest thing this year....i removed the batery and now when i try to turn on my phone -
Blocked https://ibb.co/kkOd1k
Please tell me i did not brick my phone without even trying to root it first. My understanding is that i accidentally wiped the current OS (softbrick?) and now i have to flash a new one and then continue with what i had planned. Or is this a small problem that can be fixed easier? Or a more serious one ? Good news tho maybe, i think that the bootloader is unlocked ?
Thank you @Droidriven for your info so far, you have been extremely helpful.
*EDIT* - Pictures didnt link correctly.
luan96 said:
Well, looks like i messed up somehow. I was fiddling around the recovery mode and Odin mode. Those were the only two screens i could view besides normal booting, so i was looking for any info.
Recovery Mode https://ibb.co/hotYZ5
Odin mode 1 https://ibb.co/nFfVE5
Once on the recovery mode, i selected "reboot to bootloader" hoping to find info if its locked or not. I got redirected to this screen
Odin Mode 2 https://ibb.co/kqhtZ5
And then i did what i think is the dumbest thing this year....i removed the batery and now when i try to turn on my phone -
Blocked https://ibb.co/kkOd1k
Please tell me i did not brick my phone without even trying to root it first. My understanding is that i accidentally wiped the current OS (softbrick?) and now i have to flash a new one and then continue with what i had planned. Or is this a small problem that can be fixed easier? Or a more serious one ? Good news tho maybe, i think that the bootloader is unlocked ?
Thank you @Droidriven for your info so far, you have been extremely helpful.
*EDIT* - Pictures didnt link correctly.
Click to expand...
Click to collapse
It looks to me like they attempted to root the device but didn't do it correctly.
FRP can be a pain to deal with. Some can be bypassed easily, those that have trouble bypassing must sign in with the original owner's original Gmail and password used to activate the device.
The method of bypassing FRP varies from device to device.
Did you factory reset in recovery? If so, that's why you FRP blocked you.
If you have stock recovery then you should not have been able to wipe out the OS using stock recovery, typically, only custom recovery can do that, unless you did something accidentally that somehow corrupted/wiped your OS.
If the OS is gone, you'll have to flash your stock firmware via Odin and start over from the beginning.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Droidriven said:
It looks to me like they attempted to root the device but didn't do it correctly.
FRP can be a pain to deal with. Some can be bypassed easily, those that have trouble bypassing must sign in with the original owner's original Gmail and password used to activate the device.
The method of bypassing FRP varies from device to device.
Did you factory reset in recovery? If so, that's why you FRP blocked you.
If you have stock recovery then you should not have been able to wipe out the OS using stock recovery, typically, only custom recovery can do that, unless you did something accidentally that somehow corrupted/wiped your OS.
If the OS is gone, you'll have to flash your stock firmware via Odin and start over from the beginning.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
Thank you. At least its not just a paperweight. I'm installing new software on it with Kiesk 3 right now. Hope that works so i can do the rooting and TWRP install soon. I pressed "reboot to bootlader" to try and find out if its locked or not, but then it got me in download mode (without having to press up volume to contionue). After i turned off my phone by removing the battery, the OS was gone.
luan96 said:
Thank you. At least its not just a paperweight. I'm installing new software on it with Kiesk 3 right now. Hope that works so i can do the rooting and TWRP install soon. I pressed "reboot to bootlader" to try and find out if its locked or not, but then it got me in download mode (without having to press up volume to contionue). After i turned off my phone by removing the battery, the OS was gone.
Click to expand...
Click to collapse
Did you get this restored with Kies?
Droidriven said:
Did you get this restored with Kies?
Click to expand...
Click to collapse
Yes, i did. Worked like a charm, and even got the new 6.0.1 android on it. Also installed TWRP, and just finished installing Xposed Framework, now waiting for it to boot up ( i hear it takes some time). Seems all well so far. If any problems pop out ill be sure to post about it. Also thinking about making a new thread just to help newbies like me who really just want to remove some bloatware, and install some nice modules and not heavily mod the phone. You have been very helpful during this process. Many thanks to you ^-^ .
luan96 said:
Yes, i did. Worked like a charm, and even got the new 6.0.1 android on it. Also installed TWRP, and just finished installing Xposed Framework, now waiting for it to boot up ( i hear it takes some time). Seems all well so far. If any problems pop out ill be sure to post about it. Also thinking about making a new thread just to help newbies like me who really just want to remove some bloatware, and install some nice modules and not heavily mod the phone. You have been very helpful during this process. Many thanks to you ^-^ .
Click to expand...
Click to collapse
If you have issues with Xposed causing a bootloop, you can flash the Xposed uninstaller zip in TWRP to remove it, then troubleshoot why it bootlooped and try again.
Are you using the Touch wiz marshmallow Xposed framework?
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE

Categories

Resources