Related
It's really annoying. The Hero's got it, and it was invaluable to me. saved my phone many a time.
I've been reading many reviews online re this lacking on the Nexus One as well, and users as well as editors citing Apple as starting the dumb trend to eliminate a strap connecting point as I am sure it would ruin steve's aesthetics. So why did HTC have to go follow this dumb new trend?
Does anyone know if any of the silicon cases set to come out will have at least the option for a carrying strap?
You know this was brought up at HoFo. We were talking about creating some sort of lanyard port on the iPhone itself. Maybe if case-mate got the hint and started producing cases....
Anywho, what could be done is get a thick gelli/silicone case and use a small tipped screw driver or even a safety pin to create 2 holes anywhere on the case.
That eBay seller (e-story) that I keep talking about, has Nexus One cases that have a built-in lanyard port. Unfortunately he hasn't started selling silicone cases yet for the Desire. Hopefully sometime in the next few weeks.
I posted a link earlier with a guy in Hong Kong who has started to sell a silicone case that can possibly be modified with the holes for a lanyard.
thanks for the reply. I already have "ruinified" my back cover by placing those self adhesive gripper strips on it so the phone doesn't slip out of my hands. It's way more slippery than the Hero -- which is funny, because so many review spoke of how the phone's materials had more of a grip feel to them... not so. Yes, some resistance vs slipperyness of polished plastic or aluminum, but not enough to be safe.
So that was "be safe not sorry" measure #1.
Measure 2 is: I ordered already a silicon gel case for the Desire. It starts shipping in 5 days. I have no idea the quality. But to me it's insurance at this point, since who knows how long til the market is developed withj accessories. quite amazing how unprepared the accessory market was. Not like this phone was a secret.
I ordered from here, since i am usa:
http://www.amzer.com/Amzer-Silicone-Skin-Jelly-Case-Black-P87961.htm
but found it here initially, a uk vendor for them:
http://www.fommy.co.uk/view-full-page.asp?divid=HTC&model=HTC+Desire&cat=Cases&skuno=87961
I am sure i must have seen it on one of these threads.
I will for sure be fashioning a carry strap one way or another, and how dumb for HTC to "delete" this usability design element... especially when the European Hero (NOT the ones you would have seen in the USA) has the most elegant design including its carry strap hole and method of securing. Just beautiful. I wonder if the Legend has a carry strap or did they abandon it there too...
redrazr7791 said:
You know this was brought up at HoFo. We were talking about creating some sort of lanyard port on the iPhone itself. Maybe if case-mate got the hint and started producing cases....
Anywho, what could be done is get a thick gelli/silicone case and use a small tipped screw driver or even a safety pin to create 2 holes anywhere on the case.
That eBay seller (e-story) that I keep talking about, has Nexus One cases that have a built-in lanyard port. Unfortunately he hasn't started selling silicone cases yet for the Desire. Hopefully sometime in the next few weeks.
I posted a link earlier with a guy in Hong Kong who has started to sell a silicone case that can possibly be modified with the holes for a lanyard.
Click to expand...
Click to collapse
I do agree that it was sort of retarded to leave out the lanyard port. Even the MyTouch 3G had it
What you could do is also drill 2 little holes into the back-cover of the phone, line them up with the silicone skin and place 2 holes through the skin also. This way you have added security with the strap being through the back-cover and the skin.
I just did some searching on eBay and it seems that more sellers are starting to push out cases for the Desire. They look pretty good, especially since they cover the whole phone (buttons and trackpad), not just running around the border of the phone -
http://cgi.ebay.com/Blue-Silicone-S...ewItem&pt=PDA_Accessories&hash=item414ef7eed5
http://cgi.ebay.com/Black-Silicone-..._MobilePhonesCasesPouches&hash=item4aa097dbda
http://cgi.ebay.com/Silicone-Case-L...ewItem&pt=PDA_Accessories&hash=item414ef49799
Thing is...they are all located in Hong Kong
redrazr7791 said:
I do agree that it was sort of retarded to leave out the lanyard port. Even the MyTouch 3G had it
What you could do is also drill 2 little holes into the back-coveri of the phone, line them up with the silicone skin and place 2 holes through the skin also. This way you have added security with the strap being through the back-cover and the skin.
Click to expand...
Click to collapse
That's an idea worth considering but of course 2 problems ... backs snap is itself not secure enough for holding weight of hand ... and the warranty void. I did buy 3rd party insurance from square trade which covers accidental damage incl dropping...
Still I would seek some more secure anchor method... If I had some spare time, I swear I would do this: I'd work my way through the corporate maze at HTC until I burrowed into someone in actual product design... and then I would pose the challenge to them from a purely hypothetical point of view about where and how this fish-line could be anchored.
redrazr7791 said:
I do agree that it was sort of retarded to leave out the lanyard port. Even the MyTouch 3G had it
What you could do is also drill 2 little holes into the back-cover of the phone, line them up with the silicone skin and place 2 holes through the skin also. This way you have added security with the strap being through the back-cover and the skin.
Click to expand...
Click to collapse
The skin would have the advantage of keeping some extra pressure keeping the back on, with out this I would also be worried about the back pulling off. I would make the holes nearer the bottom because this edge is opposite the edge which is designed to be opened.
I've gone the Zag InvisibleSHIELD route, so I have no plans to fit a silicon skin, so I've had to find a different solution.
I found that I can loop the lanyard fixing chord around the sim in the phone, between the silver sim socket and the 'runner' about 5mm away on the left hand side of the sim. It makes it tight work to get the sim back in place, but it does seem to work. I was considering making a small hole on the right hand edge of the back panel to allow the mounting chord to pass through but now I don't think this is necessary as the back does clip into place with only the slightest bump.
The sim socket, which will now be taking the strain from the lanyard, is fixed very securely. When I first tried to insert the sim into the phone I didn't even realize the 'runner' was there and tried to slide the sim in over the runner and didn't manage to get the socket to pop out.
Spud, congratulations on a GREAT "Post #1" to XDA ---- one of the best examples of a "Post #1" I have seen here in years. I am really thankful you posted this, as I find this to be an essential accessory... One which to me reduces stress far more than any case or screen shield... Knowing I have the phone strapped to my wrist has always given me primary peace of mind for a device that is so precisely put together where one drop could dislodge any number of things, even if a case prevents a knick or scratch.
REQUEST: Could you get a camera that has macro-close-up focus, and take a few extreme close up pictures of your assembly? I have a good sense for what you mean, but nothing speaks like a picture. I was thinking of exploring this kind of route myself, trying to figure out a way similar to how the HERO's anchor point was designed so brilliantly.
I think new members have some restrictions on posting links, and I am guessing no file attachments either, so, would you consider please taking a full series of photos, cover on, cover off, the whole process... and then email me the pics? and then i can post them here, and this could help a lot of people.
You can email me at my user name here @ gmail dot com. Thank you for posting! And welcome to XDA-developers. How do you like your desire? Have you had a touchscreen phone before? If so, which one?
SpudULike said:
The skin would have the advantage of keeping some extra pressure keeping the back on, with out this I would also be worried about the back pulling off. I would make the holes nearer the bottom because this edge is opposite the edge which is designed to be opened.
I've gone the Zag InvisibleSHIELD route, so I have no plans to fit a silicon skin, so I've had to find a different solution.
I found that I can loop the lanyard fixing chord around the sim in the phone, between the silver sim socket and the 'runner' about 5mm away on the left hand side of the sim. It makes it tight work to get the sim back in place, but it does seem to work. I was considering making a small hole on the right hand edge of the back panel to allow the mounting chord to pass through but now I don't think this is necessary as the back does clip into place with only the slightest bump.
The sim socket, which will now be taking the strain from the lanyard, is fixed very securely. When I first tried to insert the sim into the phone I didn't even realize the 'runner' was there and tried to slide the sim in over the runner and didn't manage to get the socket to pop out.
Click to expand...
Click to collapse
Not recommending it, but have you thought about threading through the two holes for the front top "speaker"?
quicksite said:
REQUEST: Could you get a camera that has macro-close-up focus, and take a few extreme close up pictures of your assembly? I have a good sense for what you mean, but nothing speaks like a picture. I was thinking of exploring this kind of route myself, trying to figure out a way similar to how the HERO's anchor point was designed so brilliantly.
I think new members have some restrictions on posting links, and I am guessing no file attachments either, so, would you consider please taking a full series of photos, cover on, cover off, the whole process... and then email me the pics? and then i can post them here, and this could help a lot of people.
Click to expand...
Click to collapse
Sorry, I can't run to a full set of photographs, but I hope the following will suffice.
Hmm. Don't really like that. Looks risky and deforms the case.
SpudULike said:
Sorry, I can't run to a full set of photographs, but I hope the following will suffice.
Click to expand...
Click to collapse
That's pretty impressive.... I didn't check the inside of mine initially when you described it, and so before the pictures I was imagining that carry strap feeding down through the bottom of the cover, and I was wondering how that would work. So I actually didn't realize til I took the back of my Desire off that it's coming off the left side when looking at the screen, which is good placement ergonomically.
As for the engineering tensions and torques, I have no idea... I was trying to just imagine it in my head, and i applied force to the plastic sim card in the downward direction if the device were to slip from my hand... I can't evaluate but one thing's for sure, as you said, with your scenario of no case, this is, to me, a much better solution that praying no accidental dropping.
HTC really should have handled this (pun intended). Nice job! And thanks for the pics. I didn't know new registrants could post pics until x number of posts, but I guess you've shown otherwise, and that's a good thing.
al89nut said:
Not recommending it, but have you thought about threading through the two holes for the front top "speaker"?
Click to expand...
Click to collapse
Well do you mean anchoring it at the top and draping over the back and hanging down that way?
I'm going to simulate what MAYBE you mean, and photograph it.. then post again and ask...
al89nut said:
Not recommending it, but have you thought about threading through the two holes for the front top "speaker"?
Click to expand...
Click to collapse
Is this what you had in mind? This is just a "fictional dramatization".. Do not try this without adult supervision. But now that I see it, I wouldn't mind at all seeing 2 black threads at the top...
I guess when I get a silicon gel casing I won't need this solution, but i think it's also pretty good. Now if only someone can determine how & if the black-thread fishing line can be fished through the opening.... Oh, and if this wasn't what you had in mind, what WAS your idea?
.
That was it, though as I said, I would not be sure that it would not deform the two holes or interfere with the sound quality.
There is another better option - if you take the back off there are two torx screws in the top left and the top right (from the back) locations. I should imagine that if loosened, something could be looped around the top right one and then it could be tightened back up. Whether that loop would be the lanyard or a connecting piece of strong nylon I don't know. If you really want to go to town, you could probably try to cut a tiny tiny nick so it could come through the back cover where the notch is already cut to let you pry the back off. That's my best suggestion.
Attaching a strap
I have threaded fishing line through 4 of the holes in the speaker thingy on the top back and made a small loop. I have attached my lanyard strap to that and it has worked ok so far.
tirc83 said:
I have threaded fishing line through 4 of the holes in the speaker thingy on the top back and made a small loop. I have attached my lanyard strap to that and it has worked ok so far.
Click to expand...
Click to collapse
Oh, i would LOVE to see a photo! so cool.
Meanwhile, I have created a lanyard carry strap using a silicon case, punched a needle sized hole through and attached to a small smooth edged thin "plate" about the dimensions of an SD card.
I have been meaning to post my video on this. It is awesome.
But I and OTHERS would love to see your solution in pictures. Could you take some please? and if possible take close up macro shots right at the speaker grill with good lighting shining right in there, maybe a flashlight, so that we can see what IS or is not being obstructed..... the big worry was that fishing a line thru there would puncture the speaker itself.
So could you describe what you discovered?
thank you! great job!
Pics of fishing line method
quicksite said:
Oh, i would LOVE to see a photo! so cool.
thank you! great job!
Click to expand...
Click to collapse
OK here are three pics of the finished article. I just removed the back cover, threaded through some fishing line and tied a small loop. I was then able to use this loop as an anchor for the strap.
Nice, but I would really, really worry that the back cover will come off. Better if you can secure it to some of the screws inside the Desire.
tirc83 said:
OK here are three pics of the finished article. I just removed the back cover, threaded through some fishing line and tied a small loop. I was then able to use this loop as an anchor for the strap.
Click to expand...
Click to collapse
Oh, I see now, I hadn't noticed -- you fed thru the BACK cover speaker grill.... When i first read i thought you had created the solution i made the video simulation about, which was afixing the lanyard fishing line around and behind the FRONT speaker grill -- which is why i mentioned there was fear about tearing into the speaker.
Well you saw the other person's solution, right, where he attached the lanyard to the micro SD card cage inside and send the line out the side. Some people liked that conceot, some didn't.
Okay, i have to post my pics. I have a 50-photo sequence of very detailed extreme close-ups of creating a lanyard strap for use with a silicon casing. It's practically foolproof. I say practically, because there are always ways to be so reckless beyond what any guardrails on a mountain roadway will ever do to protect you and your car from tumbling over the edge and over the mountain
I'd say the concerns in this case are correct... With the attchment point being just the back cover; I'm afraid that is not reliable enough to risk a $550 device's safety on.
I have not reviewing this thread, so not sure if it was on this one or another one where someone talked about using one of thecasing screws of the internal phone device.... though i think these void your warranty.
(time for me to say again: why oh why oh why HTC, why did you blindly follow Apple's iPhone BAD DESIGN PHILOSOPHY and do away with this small little item that protects a $500-$550 device? The design of the HERO *had* the carry strap hook, and it was brilliant and elegantly designed... sheesh !)
Can they tell if you loosen a screw a little?
Hi,
In the quest to have a decent protective case, I went to the extent of modding a well-known one. The Proporta.
As many have seen, Proporta holds the Desire only in two points and leaves the rest of the phone unprotected.
What I've done was to remove those clamps and glue a gel case. The result can be seen in the attachment.
To me the original clips are holding the phone very well, there is one also on the bottom as well avoiding it to slide off. Im very happy as it is!
How the devil did you glue the rubber case to the leather?, I've tried to glue silicone before and had absolutely no luck at all, nothing sticks to it.
I used the same glue that's used in shoes. I don't know it's type in english! It's something in the line of Pattex Contact, I believe.
jannen said:
To me the original clips are holding the phone very well, there is one also on the bottom as well avoiding it to slide off. Im very happy as it is!
Click to expand...
Click to collapse
My Proporta case has no clip on the bottom?
I like the case, though the clamps/clips on side are a little looser than what they were when I first got it. As such the Desire seems to slide upwards or downwards when the case is opened (i.e. when in call) which is annoying and just about bearable. A stability clip, somehow implemented, would definately be a plus to an otherwise great case IMHO.
DoomFragger said:
I used the same glue that's used in shoes. I don't know it's type in english! It's something in the line of Pattex Contact, I believe.
Click to expand...
Click to collapse
nice solution, now you've got my brain cogs whirling I think I've got some Shoo Goo that I used to use on my trainers back in my longboarding days.
I've got myself a Tuff-Luv case, which is basically the same case as the proporta minus the aluminium plate. Do you think in your opinion theres enough room to cut a hole in the back of the leather case to be able to use the camera?, perhaps seal the cut with something?
I keep flip-flopping between it being to close to the edge of the 'flap' and that it should work.
I've attached a picture on how it looks in mine.
I believe that it should work but it would definitely need some way seal the cut.
Unfortunately I can't give you any suggestion on the how! My expertise in leather is almost non.
I just bought this new car holder two weeks ago and I have to say it's awesome! I've had two car holders before this, one giant universal one that was ugly and broke really quick, and a SGS specific one bought off Ebay that scratched the backplate and was no good.
I saw this at a local store last week and decided to give it a try, it's a universal mount that holds using an adhesive pad, but the pad leaves no residue or stickyness on the phone it just holds the phone, and then when you pull it off it comes off. My phone has never fallen off and one time just for fun I tossed the phone at it lightly and it stuck, thats how sticky this thing is.
The best part is once it starts to lose its stickiness due to dust, skin etc you just rinse it out and start over again.
(I don't have any pictures right now but heres the website)
http://www.clingo.com/
bigc_13 said:
I just bought this new car holder two weeks ago and I have to say it's awesome! I've had two car holders before this, one giant universal one that was ugly and broke really quick, and a SGS specific one bought off Ebay that scratched the backplate and was no good.
I saw this at a local store last week and decided to give it a try, it's a universal mount that holds using an adhesive pad, but the pad leaves no residue or stickyness on the phone it just holds the phone, and then when you pull it off it comes off. My phone has never fallen off and one time just for fun I tossed the phone at it lightly and it stuck, thats how sticky this thing is.
The best part is once it starts to lose its stickiness due to dust, skin etc you just rinse it out and start over again.
(I don't have any pictures right now but heres the website)
http://www.clingo.com/
Click to expand...
Click to collapse
This is some pretty neat stuff!!!
Looks awesome.
Just bought one of eBay
I would like some more reviews for this it looks very interesting will it also hold with an invisibleshield attached to the back or is it slippy then? I don't want my phone to fall off while driving it could cause a lot of damage to my phone
webcrtor said:
I would like some more reviews for this it looks very interesting will it also hold with an invisibleshield attached to the back or is it slippy then? I don't want my phone to fall off while driving it could cause a lot of damage to my phone
Click to expand...
Click to collapse
+1
I'd like to know how sticky the sticky bit is as the roads over here are atrocious, I don't really want to have to fish the phone out from under the pedals while doing 100kmh
I like the idea of these but i don't think i'd ever trust it to hold the phone properly
I have seen a video of someone going over speed bumps and the phone stayed attached but i'd rather go for something that i know would be sturdy due to the holder. Just my opinion.
Got mine the other day.
Where I'm living at the moment there is road crew everywhere screwing with the roads. Potholes raised bits in the road. Suffice to say the roads are f'ing terrible.
And this thing will not let go if it at all. After driving around for about half an hour it was actually quite difficult to get my phone off the holder.
Driving around there is very little vibration in the phone, all the joints in the holder are very firm without being a ***** to use.
Overall im very impressed
As an extra test, I just went on a 600km road trip on Monday and it held my phone the entire time, I love this thing
For those who don't believe in Clingo I must say that it takes me two hands to take my SGS off of it. It is STICKY.
When you remove the phone off the holder does it make the back of the phone all weird and sticky?
And will it stick to a phone case? the case has a smooth and a bit of rubbery feel to it
I bought one of these also and found it to be very good.
You just have to watch out for the bump on the bottom of the SGS in positioning the phone during sticking.
I had one of these for a while but have now switched to a holder that my SGS just slots into.
It doesn't leave any residue on the back of the phone. It doesn't work too well with leather cases as it likes a nice smooth surface for maximum attachment and a word of warning, it can lose some of its 'strength' if the sun is baking your car all day. Even in England where we just get ****e weather, last summer mine dropped off a couple of times whilst driving which is why I ditched it.
And one final tip, get a retractable car charger because you can then 'set the slack' in the cable so that it does not pull on the phone. Curly cords can cause the phone to work itself loose as they always try and retract into their original shape. Plus retractable chargers are neater too.
I use the i9000 specific one from Ebay (dealextreme actually). I've hacked it a bit:
- shortened the bit that goes over the phone so it will push less hard
- removed some sharp edges that could scratch the phone
- removed the bendy bit and glued the phone holder and suction parts together at a near-right angle
and most important of all:
- stuck a PU anti slip mat under the suction cup and cut to size (a tad larger than the original suction cup). Now the suction cup also sticks to the dashboard
Those PU mats are like the Clingo backside I suppose. But a lot less expensive. The grip is very good (too good?) as I wanted to remove it from the phone and I was afraid to pull off the back cover. I'm happy I only stick it to the dash
TieNN89 said:
When you remove the phone off the holder does it make the back of the phone all weird and sticky?
And will it stick to a phone case? the case has a smooth and a bit of rubbery feel to it
Click to expand...
Click to collapse
I dont have a case on my phone so I can't comment on that part.
But it does not leave any sort of residue at all. comes of perfectly clean.
Quick update (hope this doesn't count as necro posting) The holder got dusty, started losing its grip, I rinsed it off and the next morning when it was dry it was as sticky as it was when I first started using the holder. Much more time down the road and this is still a great holder.
I'm interessed in it also, but...
The hole of speaker sound, is not covered by clingo??
Because when i'm using satnav/GPS apps i need to listen, but if clingo is above the hole the sound doesn't come out...
Can someone say something about this, please...
Sncrespo said:
I'm interessed in it also, but...
The hole of speaker sound, is not covered by clingo??
Because when i'm using satnav/GPS apps i need to listen, but if clingo is above the hole the sound doesn't come out...
Can someone say something about this, please...
Click to expand...
Click to collapse
All you would need to do is place it on the holder so that it isn't covering the speaker hole when you stick the phone to the clingo holder. You can stick it anywhere you want on the phone so it's only a matter of placement
Only caveat is that smooth/velvety materials don't stick well. My HTC EVO stock battery case doesn't stick for long, and the Seidio active innocase is too smooth to stick. Works great on a stock iPhone and my HTC Universal. Holds that one hard enough to pull the battery cover off!
My concern is will it rip off my invisible shield when I try to take it off the mount. I can see the adhesive pulling the film right off the back of my phone.
I've got this for my Samsung Galaxy S II, and it will almost *always* remove the battery cover due to its grip when trying to take the phone off. Good and bad
Ultimately I settled on the trident case, pictures in this post. Thanks to gtny930 for finding it for us.
There are some other good case recommendations scattered through the thread, as I get the time I will source them up here for easier reference.
--------
Hey all, i've been searching amazon off and on for cases for our wonderful device, and finally pulled the trigger on one:
Link here
Says it's by HTC, and I ordered from BlueMall, at $0.32 I couldn't not get it...
Rubberized case, two pieces to fit the slide function, looks like a winner.
I doubt it'll be as good as an otterbox as far as protection, but a buddy of mine has an otterbox for his Inspire 4G - and suffers from serious overheating problems. Since our phone already suffers from that with the stock battery i'm gonna pass otterbox by on this phone. (Anker 1900 battery solved overheating problems for me)
Anyways, at less then $3.50 shipped, seemed like a fantastic deal.
Meantime, I have a screen protector and bodyglove on it now, which seems to be a good temporary fix until some proper protection was available. Love the glove, but to me it's only a temporary solution.
What're the rest of you doing for a case or protection for your phone? I'd love to hear about it.
ArmorSuit and HTC Messenger
I got this:
http://www.amazon.com/ArmorSuit-MilitaryShield-Protector-T-Mobile-REPLACEMENTS/dp/B0058XMYDU/ref=sr_1_3?s=wireless&ie=UTF8&qid=1314661800&sr=1-3
I posted "customer pics" of what is looks like on my phone too at Amazon.
I'm coming from the G1 and was used to the G1 sleeve so I also bought this:
http://www.amazon.com/HTC-Messenger-Pouch-HD2/dp/B003DZ13OG/ref=sr_1_1?s=wireless&ie=UTF8&qid=1314661896&sr=1-1
It's a nice fit and doesn't stick out the top.
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Found this on Ebay. Still waiting for it (and MT4GS) to come. =[
I'm not allowed to post links yet so just put a dot in between.
http://www ebay.com/itm/HTC-MYTOUCH-4G-SLIDE-Hard-Cover-Case-SUMMER-FLOWER-/220839183408?pt=PDA_Accessories&hash=item336b0a8430#ht_2773wt_673
Lily.
MT4GS Cases / Shells
The rubberized hard Body Glove shells offered by T-Mobile (and sold on Amazon, eBay, etc...) are bulky and are missing holes for the microphone above the camera lens. I ended up buying the full body Invisible Shield and it looks great. The only problem is that they didn't include a piece for the bottom front of the phone (under the buttons and around the touchpad). I can put a hard case over the shield if I want, for extra protection or to just change up the look.
I have the solid black case. Just some things to note. First, the back piece is very tight, and I don't think it will ever fall off. However, when removing and replacing the cover, the clips can easily scratch your phone. Second, one or two clips may not actually "clip" to the phone, but rather just get stuck near the top so it still holds from pressure. This really isn't noticeable, but it leaves indents from the pressure on the phone's case. In addition, the clips scrape up against the backside of the screen when sliding up the phone, and over time, start leaving a very noticeable mark. I corrected this with a just a strip of tape over where it was scraping.
The protector for the sliding part of the phone was a bit of an issue. It clips very tightly to the phone, but the clips scrape a lot against the edges of the phone next to the keyboard. In addition to making it a little more difficult to slide the phone, it leads to wear overtime (noticeable wear actually started in less than a few hours of normal use for me). I corrected this by actually cutting off the clips, and using double sided adhesive to stick that part of the case on. It doesn't scrape anymore, but at the same time, it just doesn't look good as the case doesn't properly hold together.
I don't really see how much of this can be fully fixed. I used to own a G1, and I didn't notice the issue of cases scratching the phone until it was too late, but I was able to notice it on my MyTouch. I'm hesitant to go for the BodyGuardz. I had one on my G1, and though it was nearly invisible protection, and protected 95% of the phone, I ended up dropping my phone and it landed on a sharp rock on part of the 5% that happened to not be covered (which ironically actually are the corners of the phone, where it is very likely to land on).
I'm actually a fan of the body glove case. I'm just waiting for something with more clearance because of the anker battery. I've heard goods things about the otterbox, but it is kinda bulky.
Sent from my MyTouch 4G Slide
SolemnWishing said:
I have the solid black case. Just some things to note. First, the back piece is very tight, and I don't think it will ever fall off. However, when removing and replacing the cover, the clips can easily scratch your phone. Second, one or two clips may not actually "clip" to the phone, but rather just get stuck near the top so it still holds from pressure. This really isn't noticeable, but it leaves indents from the pressure on the phone's case. In addition, the clips scrape up against the backside of the screen when sliding up the phone, and over time, start leaving a very noticeable mark. I corrected this with a just a strip of tape over where it was scraping.
The protector for the sliding part of the phone was a bit of an issue. It clips very tightly to the phone, but the clips scrape a lot against the edges of the phone next to the keyboard. In addition to making it a little more difficult to slide the phone, it leads to wear overtime (noticeable wear actually started in less than a few hours of normal use for me). I corrected this by actually cutting off the clips, and using double sided adhesive to stick that part of the case on. It doesn't scrape anymore, but at the same time, it just doesn't look good as the case doesn't properly hold together.
I don't really see how much of this can be fully fixed. I used to own a G1, and I didn't notice the issue of cases scratching the phone until it was too late, but I was able to notice it on my MyTouch. I'm hesitant to go for the BodyGuardz. I had one on my G1, and though it was nearly invisible protection, and protected 95% of the phone, I ended up dropping my phone and it landed on a sharp rock on part of the 5% that happened to not be covered (which ironically actually are the corners of the phone, where it is very likely to land on).
Click to expand...
Click to collapse
I was going to edit in my response about the case I got in the first post - but after this one I quoted I need say not much more.
I really want to like the case, it feels nice and looks good on the phone...but it makes it too much of a pain in the ... to get the back of the case off.
I didn't realize how often I pop the back of the phone open to swap out memory cards until I put the case on.
It lasted on my phone for about 3 hours before I took it off...and it scratched one corner of my phone when I did it. Scratch isn't bad, and it'll probably buff out over time, but it's the first damage the phone has suffered - ironically from the thing that was supposed to prevent this.
If you are never going to pop open the back of the phone to get to the memory card, and you don't mind the backside of your screen-half of the phone getting scratched up when you slide it open - then this is a pretty decent case.
I think the scratching the back of the screen part can be solved by using a knife to cut a sliver off the part that sticks op, then maybe using a small piece of electrical tape to cover that clip.
I like it, I want to like it, but I can't use it - I take the phone apart too damn much for a case like this to be practical.
I'm on the lookout for a gel-type case now. Think that'll be the perfect solution. If anyone finds one, please mention it here.
I got the black cheap case today. After reading the reviews I knew better than to just throw it on there. So I took a small metal file that I have, and proceeded to shave each clip down just a little. After a few trials I got the clips shaved down enough that they all fit and are not pressing against the bottom of the screen hard enough to scratch it.
The coating on this case was not really rubber. Its more of a dusted flat black. It's not slick to the touch, but it doesnt grip like the rubber of the phone.
The phone still fits into the generic style T-mobile mount. But its not as secure as without. I can turn it upside down and give it a light shake without coming loose. So hopefully it will be fine.
I got my psychedelic cover and I'm not very impressed with it. It makes the phone very bulky and awkward to hold (maybe because of my small girly hands -_-).
I find taking the back cover off particularly stressful because I'm scared I'd rip the screen off the keyboard.
Protection wise I haven't dropped my phone yet to see what kind it would provide but I'm guessing it wouldn't fall off the phone if dropped.
Haven't seen any dents or scratches caused by it.
I think I'd prefer it if it had a more rubbery feel as the texture is kind of smooth and slippery.
Overall, I'm satisfied with it but I wish I could figure out a way to take off the cover without the fear of destroying it. Haha.
Lily.
@siani_8
I got this: ....
.....
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Quick question - in the pictures you uploaded to Amazon the phone back and sides seem to have a checker pattern. Is that pattern due to the protector?
The otterbox exists for this phone? Or you speaking generally about the otterbox product line?
Sent from my MyTouch 4G Slide using xda premium
ssb33 said:
@siani_8
I got this: ....
.....
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Quick question - in the pictures you uploaded to Amazon the phone back and sides seem to have a checker pattern. Is that pattern due to the protector?
Click to expand...
Click to collapse
Yes, it's a woven "carbon fiber" pattern. I took the pictures at angles where the light shows it more clearly. I think it looks nice and provides a "non-slip" surface as well without adding any bulk to the phone when you want to use it, which I personally prefer.
siani_8 said:
I got this:
http://www.amazon.com/ArmorSuit-MilitaryShield-Protector-T-Mobile-REPLACEMENTS/dp/B0058XMYDU/ref=sr_1_3?s=wireless&ie=UTF8&qid=1314661800&sr=1-3
I posted "customer pics" of what is looks like on my phone too at Amazon.
I'm coming from the G1 and was used to the G1 sleeve so I also bought this:
http://www.amazon.com/HTC-Messenger-Pouch-HD2/dp/B003DZ13OG/ref=sr_1_1?s=wireless&ie=UTF8&qid=1314661896&sr=1-1
It's a nice fit and doesn't stick out the top.
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Click to expand...
Click to collapse
Thanks for linking this and posting the pics on Amazon., I'm going to order one today.
Thanks. I ordered one and installed it yesterday. The front and back went on great. I had more trouble with the sides but that is because I am not the most deft person around. There are a lot long thin pieces but MT4GS has a lot of moving parts. The phone looks great from the front. But the back has a bubble or two - again my clumsiness.
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
http://www.amazon.com/gp/product/B005H98VI2
_atlien_ said:
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
http://www.amazon.com/gp/product/B005H98VI2
Click to expand...
Click to collapse
That's about the same thing I got that I posted about before - just mine is in black.
I know I said a few posts back that I wasn't going to use it, but I had to do something to try to keep it safe.
I've been using it for a few days now, and while I have my gripes, I suppose it's okay.
I got tired of not being able to put it down anywhere, for fear of scratching the camera lens. This case sits further down then the lens, so it isn't the thing the weight of the phone rests on.
Before, i'd have to find something soft to put it down on everywhere I went, which was annoying. I wouldn't put it in my pocket, because they are always full of dust and whatnot - that little grainy stuff gets into the phone and I didn't want that.
Now, with the case on, it doesn't fit in my belt holster anymore - so I have to put it in my pocket or carry it. Desperately seeking another solution but coming up short.
What i'm thinking about doing is drilling some holes in the back of the case, and attaching a belt clip to the hard case shell itself.
So now i'm looking for either a belt holster or a clip I can attach to the hard case itself. Whatever ends up happening, i'll get some pictures and put 'em up here.
What I really, really, really, really want is a soft-rubber case, like a gel case of some sort that can absorb shock - not some hard plastic thing.
_atlien_ said:
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
Click to expand...
Click to collapse
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
cOvertKEEN said:
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
Click to expand...
Click to collapse
No, it's fine. I've dropped the phone twice and the case hasn't come off. And it certainly isn't about to come off from handling/usage of the phone. It fits snug. Supposedly its made by HTC, if that means anything. The case does it's job without problems.
Just waitin for Otter.....
Any body have a silicone case? Or one of these?
http://www.ebay.com/itm/HTC-MYTOUCH...Accessories&hash=item231421d01f#ht_1896wt_922
Looks good. Other colors available too.
cOvertKEEN said:
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
Click to expand...
Click to collapse
_atlien_ said:
No, it's fine. I've dropped the phone twice and the case hasn't come off. And it certainly isn't about to come off from handling/usage of the phone. It fits snug. Supposedly its made by HTC, if that means anything. The case does it's job without problems.
Just waitin for Otter.....
Click to expand...
Click to collapse
It fits snug, coming off accidentally isn't a problem. Both the top piece and the bottom piece are secure, normal - or even some exaggerated abnormal - use won't knock it off.
The longer I use the case the more it grows on me, I really like the silky feel of it. There have been a few situations already where having a case protected the phone - I haven't dropped it and hope I never do, but since it's becoming a portable video game system/controller amongst other things it can't be without one.
I suppose you could do far worse then this case, but i'd trade it for a gel-type rubber case in a heartbeat. Hard cases don't protect from shock damage.
Since the folio covers are 2 sided with different colors, I'm wondering: can you flip the folio case over if you want to change colors?
I like the peach/maroon colored folio cover (Coral Amethyst), but I would much rather have the Maroon showing for the front than the Peach side shown in stock photos.
I think the Vietnamese YouTube review video floating around showed the lime cover attached, with the lime facing out on the back of the device. That would mean that if you close the cover, the lime is inside, and the darker navy (?) is on the outside. It would seem to be reversible.
you can teach me how to do this okay?
---------- Post added at 03:03 AM ---------- Previous post was at 02:43 AM ----------
What I usually just hand
bailyc said:
I think the Vietnamese YouTube review video floating around showed the lime cover attached, with the lime facing out on the back of the device. That would mean that if you close the cover, the lime is inside, and the darker navy (?) is on the outside. It would seem to be reversible.
Click to expand...
Click to collapse
I watched the cover in use in a french video posted in another thread, and it doesn't look like there hinges to close the cover, like you're imagining. Looking at the video, it looks like you peel the cover entirely off the front and then stick it to the back, and vice versa. It doesn't seem to fold around on a hinge like the iPad smart cover. In which case, I guess you can probably stick it to the tablet in either direction each time you "close" it. I wish it had the hinge though. I don't really want to buy a cover that comes entirely off every time I want to use my tablet...
mrkvchm said:
I watched the cover in use in a french video posted in another thread, and it doesn't look like there hinges to close the cover, like you're imagining. Looking at the video, it looks like you peel the cover entirely off the front and then stick it to the back, and vice versa. It doesn't seem to fold around on a hinge like the iPad smart cover. In which case, I guess you can probably stick it to the tablet in either direction each time you "close" it. I wish it had the hinge though. I don't really want to buy a cover that comes entirely off every time I want to use my tablet...
Click to expand...
Click to collapse
You're right. The first video review was out before the French one, and didnt show it being taken off and put on the back, I think. From the French video, I agree, it appears hingeless, but it is probably reversible. I still have one pre-ordered from Amazon but, ugh, I kind of want it attached in some way too. But who knows! Maybe from now on I will prefer ones that come off entirely. Those magnets better be strong enough to keep it from shifting or flopping around.
bailyc said:
You're right. The first video review was out before the French one, and didnt show it being taken off and put on the back, I think. From the French video, I agree, it appears hingeless, but it is probably reversible. I still have one pre-ordered from Amazon but, ugh, I kind of want it attached in some way too. But who knows! Maybe from now on I will prefer ones that come off entirely. Those magnets better be strong enough to keep it from shifting or flopping around.
Click to expand...
Click to collapse
And that's the thing as well. I don't want to pull my tablet out of a bag and have the cover left behind. But my other issue with it is that it seems like it will be a hassle to take it off and put it on. The iPad smart covers are so easy to flip open and closed with one hand because you don't have to line it up and you only have to grab one side of it. Seems like moving the magic cover around may be quite the ordeal. I might end up getting one anyways, I don't know. Since I can't seem to order one to Canada yet anyways, I guess I'll wait and see how everyone else ends up liking it. In the meantime, my nexus 9 will either be naked or wearing a MOFRED Ultra Slim case (basically a smart cover knockoff) that I managed to order from the UK for £0.01 haha
mrkvchm said:
And that's the thing as well. I don't want to pull my tablet out of a bag and have the cover left behind. But my other issue with it is that it seems like it will be a hassle to take it off and put it on. The iPad smart covers are so easy to flip open and closed with one hand because you don't have to line it up and you only have to grab one side of it. Seems like moving the magic cover around may be quite the ordeal. I might end up getting one anyways, I don't know. Since I can't seem to order one to Canada yet anyways, I guess I'll wait and see how everyone else ends up liking it. In the meantime, my nexus 9 will either be naked or wearing a MOFRED Ultra Slim case (basically a smart cover knockoff) that I managed to order from the UK for £0.01 haha
Click to expand...
Click to collapse
I'm not sure about the status of my Amazon order (still says not yet shipped), but it is supposed to arrive on Wednesday. So is my tablet but again, still not shipped yet. I'll give a quick update when they get here and I have a chance to try it out. It's a $40 gamble but I usually end up liking the OEM accessories, as overpriced as they are.
bailyc said:
I'm not sure about the status of my Amazon order (still says not yet shipped), but it is supposed to arrive on Wednesday. So is my tablet but again, still not shipped yet. I'll give a quick update when they get here and I have a chance to try it out. It's a $40 gamble but I usually end up liking the OEM accessories, as overpriced as they are.
Click to expand...
Click to collapse
Well it seems like we have the same reservations about it, so I'll be interested in hearing what you think.
mrkvchm said:
I watched the cover in use in a french video posted in another thread, and it doesn't look like there hinges to close the cover, like you're imagining. Looking at the video, it looks like you peel the cover entirely off the front and then stick it to the back, and vice versa. It doesn't seem to fold around on a hinge like the iPad smart cover. In which case, I guess you can probably stick it to the tablet in either direction each time you "close" it. I wish it had the hinge though. I don't really want to buy a cover that comes entirely off every time I want to use my tablet...
Click to expand...
Click to collapse
I can see how you can make the assumption that you can just flip the cover around, but then you're not accounting that flipping around the cover could reverse the polarity of the magnet, thereby making the other side of the cover repel away from the tablet rather than being attracted to it. I hope I'm wrong though..
mkygod said:
I can see how you can make the assumption that you can just flip the cover around, but then you're not accounting that flipping around the cover could reverse the polarity of the magnet, thereby making the other side of the cover repel away from the tablet rather than being attracted to it. I hope I'm wrong though..
Click to expand...
Click to collapse
Oh that's an interesting point. I would have never thought of that.... Man, that would be dumb. Well, when someone finally gets one, they'll have to settle all these questions for us once and for all.
mrkvchm said:
Oh that's an interesting point. I would have never thought of that.... Man, that would be dumb. Well, when someone finally gets one, they'll have to settle all these questions for us once and for all.
Click to expand...
Click to collapse
I am convinced that i is reversible. If you look at the product page on Google Play, towards the bottom you see two renderings of the cover. Using the green/blue one as an example, the image next to Takes Pictures in a Snap shows it attached to the back, blue side in, green side out, and the corner is folded over.
Immediately below that is another rendering of the cover as a typing stand for the tablet in landscape mode. Blue side is now out, green side is in, and presumably, it's still magnetically attached along that top edge.
But here's an update on the arrival -- I spoke to an Amazon representative this morning who said that they were informed that the covers have been delayed from the manufacturer, and that no retailer has them in stock right now. She said Amazon has been told that they'll receive a shipment on December 1. So, looks like we will all keep waiting to find out for sure.
I think it will work. Magnets repel each other when the poles are opposite while this is magnet to metal which is different. Somebody with a fridge magnet should be able to check easily.
smf61 said:
I think it will work. Magnets repel each other when the poles are opposite while this is magnet to metal which is different. Somebody with a fridge magnet should be able to check easily.
Click to expand...
Click to collapse
There are in fact magnets in the tablet itself. If you put two Nexus 9 next to each other, side by side, the two tablets will repel each other. I saw a youtube video of this somewhere showing this.
Is nobody concerned about the "inside" of the cover (i.e. the part facing the display) being used as the stand in the upright position? I'm a bit paranoid of it massaging dust/dirt particles into the screen...