Database Info

Root your Rogers's Magic !!!

Only apply if you have a stock Roger's Magic without root!
The following procedure flashes the stock Roger's boot image with root access enabled to your Roger's Magic :
1. Copy this update to your SD-card.
2. Download RAv1.0's rooted recovery here.
3. Boot the device in fastboot mode.
4. Connect the device to your machine over USB.
5. $fastboot boot recovery-RAv1.0H.img
wait a few minutes and unplug your device from USB
6. Choose option "Apply sdcard:update.zip" from the menu
If the flashing doesn't work you might need to flash this SPL update from your sd-card after fast booting with recovery-RAv1.0H.img
If you want to have a rooted recovery as well, you can check out this post.
Enjoy
Special thanks to :
Haykuro for all his help ^^ , buy him a Nesquik!
JesusFreke for his JFv1.43's recovery

Would this work on the Rogers Dream?

alritewhadeva said:
Would this work on the Rogers Dream?
Click to expand...
Click to collapse
No it would not work.

It works! Woot Root!
Edit: Confirmed root adb access by pushing these onto my phone. Now my Rogers is more awesome! Huzzah!

how do i do the fifth step
"5. $fastboot boot recovery-RAv1.0H.img"
when i connect in fast boot method, i get a a found new hardware dialog box running windows vista ultimate x64 eition

trincisor said:
how do i do the fifth step
"5. $fastboot boot recovery-RAv1.0H.img"
when i connect in fast boot method, i get a a found new hardware dialog box running windows vista ultimate x64 eition
Click to expand...
Click to collapse
Did you install the drivers properly?
Now we need to get more roms working with the Rogers! Any ideas on how we con go about that?

is there any reason that this wouldn't work on the Dream ?

jpa- said:
is there any reason that this wouldn't work on the Dream ?
Click to expand...
Click to collapse
1. I don't think the kernel inside the recovery image would work on the dream.
2. The boot image inside the update is from the Magic, not from the dream.
There's no harm in trying to fastboot the recovery image... but I don't think it will work. Let us know if it would!

Don't we need rooted recovery to be able to restore our backups? Just confirming......

parrot5 said:
Don't we need rooted recovery to be able to restore our backups? Just confirming......
Click to expand...
Click to collapse
recovery-RAv1.0H.img is rooted...

Wow... Thanks Amon_RA! I can now install some input methods that I couldn't do...
We still can't just choose any ROM out there, correct? Or now that we have ROOT we are invincible? .. hehe

Here's another possible noobish question: there doesn't appear to be any su installed by default into the stock Rogers rom (ie. attempting to su from the console results in "su:not found"). Any ideas?

parrot5 said:
Wow... Thanks Amon_RA! I can now install some input methods that I couldn't do...
We still can't just choose any ROM out there, correct? Or now that we have ROOT we are invincible? .. hehe
Click to expand...
Click to collapse
The boot images inside the "any ROM" would have to be repacked using Haykuro's discovered offset
So make sure you know what you are doing and always make a backup of your current configuration first!
Any specific ROM you would like to run on your rooted Rogers?

skittleguy said:
Here's another possible noobish question: there doesn't appear to be any su installed by default into the stock Rogers rom (ie. attempting to su from the console results in "su:not found"). Any ideas?
Click to expand...
Click to collapse
Just download Koush's su from his blog here.
* Unzip the ZIP file (it will create a folder called Superuser).
* Run install.bat (or install.sh if you are on Linux) from the Superuser directory.

Amon_RA said:
The boot images inside the "any ROM" would have to be repacked using Haykuro's discovered offset
So make sure you know what you are doing and always make a backup of your current configuration first!
Any specific ROM you would like to run on your rooted Rogers?
Click to expand...
Click to collapse
Not sure I know what I'm doing I do not know how to mod an image.
I saw on the forum that a few people mentioned the Ion ROM is the fastest of the bunch? I definitely would want to try it. I know many other people who want the Hero ROM instead

Amon_RA said:
Just download Koush's su from his blog here.
* Unzip the ZIP file (it will create a folder called Superuser).
* Run install.bat (or install.sh if you are on Linux) from the Superuser directory.
Click to expand...
Click to collapse
Thank you so so much for all your work. You have truly made my month

wow it worked.. damn.. now i might have to get me a mytouch3g when it gets released

I followed the instructions and the phone rebooted... should I be able to su now?
I get permission denied..

thanks for your work on this Amon_RA & Haykuro!
All the best,
Rob

thank you for this.
i have a rooted rogers magic with su access.
wifi-tether is not working for me with the rogers rom. need to install a new rom i guess.

Usb Brick Fix For Stock Rom User

As My desire is amoled and unbranded i don't know for sure if this tut gonna help Slcd/Branded desire user if some one with slcd or branded desire fix there brick by follow this tut please leave a comment Here.
*To work this Hole Thing Out You need to setup Adb and fastboot in your pc,if you don't know how to do it follow this nice Guide.
http://androidforums.com/desire-all-things-root/337356-faq-adb-fastboot-windows-updated-1st-june-2011-a.html
Last few days i saw lots of people having usb brick problem even after they flashed the Ruu.exe or PB99IMG.zip update via hboot that because misc.img is corrupted and they stuck on stock rom without any usb function.Few Days ago i was in the same situation and solved my problem thought i should share this Information with people who need help.
Note-If you usb bricked on s-off device then try this fastboot command to solve this
fastboot oem enableqxdm 0(unblock your sd-card)
fastboot oem eraseconfig(fix misc partition)
if above command don't work then you have to flash a ruu.exe or PB99IMG.zip file via hboot to return to stock
rom usally that fix the usb brick but some time that trick also fails,if that happen then you have to go through the process below.
If your device is branded then create a goldcard and flash a unbranded PB99IMG.ZIP cause maybe this not gonna work on branded device.
I solve my usb brick this way
after return to stock rom via PB99IMG.zip file flash via hboot(didn't fix my usb brick so i had to do the steps below)
1.i unlocked my sd card via fastboot command"fastboot oem enableqxdm 0" sd card recognized by phone and i can browse it via file explorer.
note-you can access your sdcard only via file explorer nothing else so after execute the command download a file explorer from android market.
2.then i copied the visionary+(it gave me temporary root access which is needed to work this whole thing out).
root explorer,terminal emulator apk and those usb bricked update file(image_flash,mtd0.img) to sdcard from pc via card reader and installed them.
before copy those update file on sd card i edited the mtd0.img to put correct cid n rom info via hex editor.
To find cid info
If you don't know your Cid then type this command in fastboot-fastboot oem boot this will show you info about your phone cid.when the info shows up look for‘INFOCID HTC___xxx'
To find The Rom version-Go to Settings>About phone>Software Information and note your Software Number.
3.after that i copied those update file in phone memory to copy file in phone memory you have to set permission for r/w.When open root explorer look at the top left corner you will see mount as r/o mount r/w tap on mount r/w that's it you set permission to read/write on your phone memory and copy the file in
/data/data/ folder and set permission for r/w and execute for those file via root explorer.
4.after that i simply typed this command in terminal emulator
"su
/data/data/flash_image misc /data/data/mtd0.img"
Rebooted my phone and voila usb brick is gone htc sync,usb tethering,sd card mount,charge everything is working and now i am rooted and s-off again
Note-you don't need the rageagainstthecage file which only need if you try to get root access via terminal emulator which is lengthy n complicated but with visionary+ you can get root access with 1 click and it's much easier than typing command in T.E.
If above information helps you to fix Your usb brick Please Leave a comment Here and you can also hit the Thanks button

Exiled_SouL said:
before copy those update file on sd card i edited the mtd0.img to put correct cid n rom info via hex editor.
Click to expand...
Click to collapse
how do you edited it? thx

edited it with hex editor software it included in the zip file

I know. but how exactly?

tma24 said:
I know. but how exactly?
Click to expand...
Click to collapse
when you open the mtd0 file with hex editor look for
"HTC_1xx"-your cid
"ClearAutoImage .x.xx.405.x"-your rom value
and edit those according to your cid and rom value information.
i updated the thread with some more useful info so recheck the 1st post.

Thank you very much. While my phone is fine but I'm trying to fix a friend

you welcome,if it work out please leave a reply here

of course
my translated your post in slovak forum
http://smartmobil.sk/forum/viewtopic.php?f=142&t=12610

thank you very much
Regards.

Exiled_SouL said:
you welcome,if it work out please leave a reply here
Click to expand...
Click to collapse
Yes, I fixed it!!! Thx man.

Congrats.thanks for confirming

You've made my day. You need a donate button. Thanks.

Hi, thank you very much for responding my thread, and thank's to you my desire is back to normal..., I have one question, Is it safe to use permanent root using Visionary+ ?
thank's

kebhoganteng said:
Hi, thank you very much for responding my thread, and thank's to you my desire is back to normal..., I have one question, Is it safe to use permanent root using Visionary+ ?
thank's
Click to expand...
Click to collapse
Glad that it worked out for you about V+ root,TBH i don't know but my opinion is it's safer to use unrevocked for root.

Marc. said:
I read it, but a few questions...
( My phone is S-ON )
1. I'm not on a stock rom, but on Insertcoin
2. I can already acces my SD card, so can I skip the first step? Done that yesterday already.
3. Can I use the mtd0.img generator? If yes I have already the file.
4. With step 3, which files must be in /data/data?
5. With step 2, I have super user, so can I use that instead of the root acces thing?
Click to expand...
Click to collapse
Quote from the other topic, maybe you read it here faster.
Edit, just tried it. I generated my mtd0.img out of another topic. Read a lot, and it works perfect again!! Thanks!! You saved my phone!

Exiled_SouL said:
Glad that it worked out for you about V+ root,TBH i don't know but my opinion is it's safer to use unrevocked for root.
Click to expand...
Click to collapse
Hi, again
I have a new problem after fixing the USB Brick. I can't root my desire using Unrevoked 3, it was always failed on process uninstalling unrevoked3 system and showed :
Validation error : Backup CID is Missing
do you have any idea for this problem?
thx for your respond

That same error showed up when i tried to root after usb brick but in my app drawer the super user icon showed that means it worked somehow even after the error,so check your app drawer and recovery if you see the su icon and cwm recovery then it worked don't worry about the error
Sent from my HTC Desire using XDA App

Hello,
Can I try this method on my Desire S (unrooted, s-on v2.3.5-sense3.0) ?

a great big thank you. I am very happy!

rakhan01 said:
Hello,
Can I try this method on my Desire S (unrooted, s-on v2.3.5-sense3.0) ?
Click to expand...
Click to collapse
Yes, if you want to brick your device by flashing a misc meant for another one..

BEST Guide for Returning to Stock ! (Add to guide thread?)

Here are the directions and files used to fix this problem (do not type any of the "quotation marks"):
1. Download the .zip file from here: http://www.megaupload.com/?d=YUYEMJNM
and put it on the root of your sdcard. (Do not unzip the file). Then rename it to PD15IMG.zip .
2. Download the miscnew file to your computer (uploaded as attachment to this post). Unzip it and place the miscnew.img file that was in the zip onto the root of your sdcard. You can delete the .zip file after you do this.
3. Boot your phone up like normal and connect your phone to your computer.
4. Make sure your sdcard is NOT mounted (but make sure those 2 files were copied to your sdcard).
5. Go into adb and type "adb shell"
6. Then type, "su"
7. Then type, "dd if=/sdcard/miscnew.img of=/dev/block/mmcblk0p17"
8. Once this is done after about 5 seconds, turn your phone off and unplug from the computer.
9. Once the phone is off, hold down the volume-down key and the power button until you arrive at the bootloader. Once there, the phone should automatically start checking that .zip file you downloaded to the root of your sdcard. After its done checking, it will ask you if you want to continue, and just follow the prompt to say "yes" and YOU'RE DONE!
This guide was made by travisjames and was just put into my own words. His guide was a derivative of Apache14's OTA and Radio downgrade guide for the T-Mobile G2.
Also, thanks to Clarknick27 for tipping me off on how to get back into my phone after it was unbootable.
***Please click "thanks" if this helped you!

Ignore/Wrong thread...

two questions-
if i used gfree, do i need to undo gfree 1st? (you make no mention of rooting techniques, and if this undoes all those or not)
second, my phone, about a month ago, lost data connectivity on the usb port-- in other words, it charges fine, but i can not get any computer to pick it up any more to transfer files are use adb, which is a royal pain. -- can i use terminal emulator to accomplish your commands, or am I SOL ?
thanks

Yes, you need to undo Gfree.
Yes, you can run the commands from Terminal Emulator.
Added to Wiki.

thanks jack,
would the syntax be exactly the same as above via term em?

Yes, just skip the "adb shell" command.

Is this to undo 2.3.4 GB update and take it back to 2.2.1?

How do I undo gfree? And if I just run the pg15img will I keep root? I need a way to return to stock but rooted.
Sent from my Incredible 2 using XDA App

andrewp3481 said:
How do I undo gfree? And if I just run the pg15img will I keep root? I need a way to return to stock but rooted.
Sent from my Incredible 2 using XDA App
Click to expand...
Click to collapse
First question, Here is the thread you need to undo gfree (get s-on) http://forum.xda-developers.com/showthread.php?t=858996 (about half way down OP)
Second question, no you will not keep root
witch stock rom do you want rooted, stock 2.3.4 can not be rooted right now

So... to summarize, this would be to revert back to Android 2.3.4, sense 3.5 STOCK, without root, eng. hboot, or s=off.
In other words, if you purchased a MT4G now, or received a replacement MT4G with 2.3.4.... Following these steps will give you this new gingerbread stock state (approximately).
Please confirm. Thanks!

can i use this steps with terminal emulator on my phone instead of adb?

unciviilized said:
can i use this steps with terminal emulator on my phone instead of adb?
Click to expand...
Click to collapse
Yes...check the 3rd and 4th post of this thread....

Just curious, so if I flash this ROM in recovery, will I lose root, s-off, etc.?
What I'm trying to do is flash the phone to the MT4G stock rom (which I assume this is), use gfree to sim unlock it, then revert back to my nandroid backup, so I wanna make sure this will not interfere with my root access before I proceed to flashing it. Thanks in advance to whoever answers me~!

ronin178 said:
Yes...check the 3rd and 4th post of this thread....
Click to expand...
Click to collapse
ok so when im on emulator i do "s" and it says permission denied,
then i got to command prompt and it says adb shell is not recognized as and internal or external command. Any suggestions?

unciviilized said:
ok so when im on emulator i do "s" and it says permission denied,
then i got to command prompt and it says adb shell is not recognized as and internal or external command. Any suggestions?
Click to expand...
Click to collapse
You don't need to type adb shell because you are on terminal emulator.
Just type su to gain superuser access.
Then type dd if=/sdcard/miscnew.img of=/dev/block/mmcblk0p17
Make sure you have the file miscnew.img in the root of your sd card.

Absolutely Perfect
I have looked and looked all over both XDA and the Interent in general. I was trying to restore my Glacier (MyTouch 4g) from stock 2.3.4 to stock 2.2. NOTHING worked. It got to the point that I didn't even remember everything that I tried. I followed this guide to the T. PERFECT!!! I am now back to having my phone exactly how I left the Tmo store with it.
I CANNOT THANK YOU ENOUGH!!

Great work in helping people out that don't understand. And making it a less strenious process
Sent from my HTC Glacier using xda premium

Jack_R1 said:
Yes, you need to undo Gfree.
Yes, you can run the commands from Terminal Emulator.
Added to Wiki.
Click to expand...
Click to collapse
Sorry, a complete noob to "gfree". I'm a new convert to GSM as I was with SPrint CDMA for 10 years until a couple weeks ago. I've rooted Samsing phones but never an HTC.
Anyways, I just purchased a MyTouch that had been rooted and loaded with Virtuous ROM. It's for my wife and she wants it back to stock. I tried all your directions exactly but still will not work. I'm assuming it's this "gfree" issue. I followed the link to the other thread but it's not clear on exactly what I need to do in my situation.
When I run the bootloader, it says bad or no such image... I have confirmed I have PD15IMG.zip and miscnew.img in the sdcard root directory.
Can someone please show me in simplified terms. Thanks!

socal88 said:
Sorry, a complete noob to "gfree". I'm a new convert to GSM as I was with SPrint CDMA for 10 years until a couple weeks ago. I've rooted Samsing phones but never an HTC.
Anyways, I just purchased a MyTouch that had been rooted and loaded with Virtuous ROM. It's for my wife and she wants it back to stock. I tried all your directions exactly but still will not work. I'm assuming it's this "gfree" issue. I followed the link to the other thread but it's not clear on exactly what I need to do in my situation.
When I run the bootloader, it says bad or no such image... I have confirmed I have PD15IMG.zip and miscnew.img in the sdcard root directory.
Can someone please show me in simplified terms. Thanks!
Click to expand...
Click to collapse
If you are new to this rooting stuffs, i suggest don't go with methods, that have potential to brick your phone.
Just do this simple method, Follow the link in my signature, you will see a Rooted version of the stock 2.3.4 rom.
Just flash the Rom through your recovery.........no big deal.......easy way to get the stock feel.....
Follow the instructions carefully.........Happy Flashing........

Thanks for the great help. One more question -- How do I turn "quick boot" off?

[Q] Got S-Off but Recovery failed to install

Ok, I ran Revolutionary, got the mod to flash to get root, but when I hit Recovery on the boot screen I get some sort of lockup that requires a battery pull to recover from.
I've installed a terminal emulator, and have the root mod from Revolutionary on /mnt/SDCard. Is there some way I can run this from the terminal emulator on my phone?
I have ADB installed on my PC but I'm having some issues with that as well and would prefer to run anything directly from a terminal on my phone if possible.
BTW the phone boots back into a usable state with no issues*. I have S-Off, just don't have root.
*Well, with no issues that it didn't have before I ran Revolutionary.

Are you sure your superuser zip flashed correctly? When you go into terminal emulator and type su and hit enter does superuser ask for permissions? If it says permission denied then your root didn't work. If it does work then follow these steps:
unclespoon said:
If you're already rooted with s-off and want to update your recovery, but are like me and don't have access from work to ADB or don't know how to use it, here's how you can update to the 4.0.0.9 recovery:
1. Download Recovery 4.0.0.9 from Modaco's website
2. Using Root Explorer, find the file in your downloads folder on the sdcard.
3. Paste the recovery img file into your phone's /data/local folder.
4. In terminal emulator, first type "su" and then type "'dd if=/data/local/doubleshot.clockworkmod.4.0.0.9.modaco.img of=/dev/block/mmcblk0p21" and let it transfer the recovery file.
Simple as that!
Click to expand...
Click to collapse
Make sure the file ends in .img and not .txt or whatever it is that people keep running into. And make SURE the text is verbatim (without quotes obviously) or you'll run into errors. If it tries to capitalize a letter on you, pull out the hardware keyboard and make sure it's lowercase. If it doesn't let you input a special character, use the soft keyboard.

I appreciate the reply.
I'm quite certain that superuser didn't flash at all. The Recovery didn't install correctly, and hangs when I try to use it.
So what I want/need to do (unless someone has a better idea) is flash the MoDaCo recovery somehow. I tried to manually copy it to the correct block, but I do NOT have root.
Or manually flash the super user mod. I have a terminal emulator on my phone and can enter commands there, the super user mod is on /mnt/SDCard/.
I've also found this thread, which I intend to try to do later on after I've had more than 3 hrs of sleep in the past 24.

Yes, that's a great thread. Follow those instructions. If I were you I'd assume nothing has worked thus far and try starting over from scratch

I used the thread in the dev section the one labeled for dummies. worked like a charm.
http://forum.xda-developers.com/showthread.php?t=1286324

unclespoon said:
Yes, that's a great thread. Follow those instructions. If I were you I'd assume nothing has worked thus far and try starting over from scratch
Click to expand...
Click to collapse
That fixed it. I had issues with ADB so I had to uninstall that and reinstall it. Then I ran Revolutionary and got S-Off for real. Installing MoDaCo clockwork mod went like clockwork.
I'm now running UndeadK9's AOSP Gone Wild on Sense. I'm thinking I like some of the Sense widgets better, so I'll be reflashing his other ROM soon.
Now I just need to figure out how to do a batch restore in Titanium Backup and I'll be golden.

Have to buy full or use a cracked version if their is one.
Sent from my Crack Injected Doubleshot using xda premium

Droidmoder said:
Have to buy full or use a cracked version if their is one.
Sent from my Crack Injected Doubleshot using xda premium
Click to expand...
Click to collapse
I bought the full version of both Titanium Backup and Root Explorer.

Tb explains itself. Great app can also freeze updates and such so you won't be bothered by them.
Root explorer can fix premissions which is good and also various other things.
Two very good buys .
Sent from my Crack Injected Doubleshot using xda premium

NEW 2.3.4 MT4G Downgrade Instructions...

I had the issue of downgrading the NEW out of box 2.3.4.... I was given this link by neidlinger. I had to edit the ending of it to get it to work but it worked, and is working great. Here is the link, and below it is my edit of them.
P.S. MAKE SURE YOU USE THE LINKS TO DOWNLOAD THE PROGRAMS YOU NEED....IF YOU ALREADY HAVE THEM DOWNLOAD THESE AND REPLACE THEM.(JUST TO BE ON THE SAFE SIDE) It wouldn't work for me until I re-downloaded and replaced them.
http://wiki.cyanogenmod.com/wiki/HTC_Glacier:_Full_Update_Guide
Downgrading to 1.17.531.2
If the HTC Glacier is running a Gingerbread firmware (2.xx.xxx.x) (Settings » About Phone) you need to downgrade the device first in order to root. If the HTC Glacier is already running 1.17.531.2 or lower you can skip to the Rooting the HTC Glacier section.
1. You will need ADB on the computer to proceed thru this process. Follow the Android SDK guide, to get the ADB shell on the computer.
2. Download fre3vo, misc_version 0.2 & the 1.17.531.2 firmware:
o fre3vo: Download
md5: 010e076a4a93be876579711bf8934c70
o misc_version 0.2: Download
md5: 1f40aaf88d1bf15775631a58c4361218
o 1.17.531.2 firmware: Download
md5: 49d07f0ee7de1765a6a84cb12fa53110
3. Unzip the fre3vo & misc_version packages to the same folder as adb (the /platform-tools folder within the Android SDK folder).
4. Make sure the filename of the firmware is PD15IMG.zip exactly or it will not work and copy it to the same folder as adb.
5. Connect the HTC Glacier to the computer via USB.
6. On the computer, open terminal and run the following commands:
adb push fre3vo /data/local/tmp
adb push misc_version /data/local/tmp
adb shell
chmod 777 /data/local/tmp/fre3vo
chmod 777 /data/local/tmp/misc_version
/data/local/tmp/fre3vo -debug -start FAA90000 -end FFFFFFFF
adb shell
NOTE: You should have the "#" sign instead of the "$". If you do, you have temporary root, and can continue on. If you have the "$", then the exploit has failed, refer to xda developers, RootzWiki, or #G2Root for further assistance.
/data/local/tmp/misc_version -s 1.00.000.0
exit
7. Now that misc version has been downgraded, the HTC Glacier is ready to have the firmware downgraded. On the computer, open terminal and run the following commands:
adb reboot bootloader
8. Use Volume up/down keys on the HTC Glacier for navigation and Power key for confirmation. Select Bootloader to flash the 1.17.531.2 firmware.
( IT MAY AUTOMATICALLY START )
Once finished you can Root the device by following the instructions on this link…..
http://forum.xda-developers.com/showthread.php?t=858996

its gotta be an easier way to downgrade.

It's actually very simple... I did it after 2 showers of the "herbal" essence kind. Ha...!
Sent from my HTC Glacier using XDA App

BillyBoy74 said:
It's actually very simple... I did it after 2 showers of the "herbal" essence kind. Ha...!
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
i am kinda surprised with all the people on this site that no one has made a one click downgrade yet.

??????
Can anybody help me please?
i followed these steps and i still havent downgraded

bam5bam57 said:
Can anybody help me please?
adb cant read my mytouch 4g device.
Click to expand...
Click to collapse
You installed the usb driver and rebooted your computer?
Sent from my myTouch 4G using xda app-developers app

modbass said:
i am kinda surprised with all the people on this site that no one has made a one click downgrade yet.
Click to expand...
Click to collapse
Why dont you make one then?
Sent from my GT-N7000

thecool14soh said:
its gotta be an easier way to downgrade.
Click to expand...
Click to collapse
Actually used instructions from THeUnlockr.com - very easy to follow and worked like a charm.
http://theunlockr.com/2011/10/25/ho...ire-z-desire-hd-and-mytouch-4g-back-to-froyo/
CAUTION: there's a link to the Froyo ROM that seems to be defective - get the ROM from here:
http://forum.xda-developers.com/showthread.php?t=1476745&highlight=pd15img&page=1

Bass_Man25 said:
Actually used instructions from THeUnlockr.com - very easy to follow and worked like a charm.
http://theunlockr.com/2011/10/25/ho...ire-z-desire-hd-and-mytouch-4g-back-to-froyo/
CAUTION: there's a link to the Froyo ROM that seems to be defective - get the ROM from here:
http://forum.xda-developers.com/showthread.php?t=1476745&highlight=pd15img&page=1
Click to expand...
Click to collapse
I tried following theunockr directions but it didn't work. I wound up having to turn my SD card into a goldcard for it to finally downgrade (what a stupid idea going for the unlocked bootloader was)

This is the RIGHT one.

skygear said:
This is the RIGHT one.
Click to expand...
Click to collapse
This is the Right WHAT?

K-JACKS said:
This is the Right WHAT?
Click to expand...
Click to collapse
Shhh. Pretend it's not there and slowly walk away.

Jerk. This is the right set to downgrade.
Can't believe you were thanked for your stupid response.

Lol... Yes it works like a charm...
Estalling lol looking good so far for that RC title.
Sent from my HTC One S using Tapatalk 2

...Awesome... said:
Lol... Yes it works like a charm...
Estalling lol looking good so far for that RC title.
Sent from my HTC One S using Tapatalk 2
Click to expand...
Click to collapse
Hahaha :thumbup:

Thank You!
Thank you, I have an HTC Glacier MyTouch 4g and I can not root, unlock the bootloader, or downgrade! I just went through the Android Bullet but failed after about 5 tries.
modbass said:
i am kinda surprised with all the people on this site that no one has made a one click downgrade yet.
Click to expand...
Click to collapse

NOOB needs help
Can someone please help me.... trying to down grade and ready to give up. This is my second day on this and just got past (adb shell cat /dev/msm_rotator). Anyone have a new way to downgrade?

I always use the instructions on theunlockr.com actually just did it last week to a vision which is the same process. Make sure u follow directions exactly and don't skip through.
As long as u have adb set up correctly then all is good.
Sent from my HTC myTouch 4g using xda app-developers app

This Device Does Not Support This Exploit
I've tried a few different guides for temp root, but they all rely on fre3v0. The issue I am having is that after running the /data/local/tmp/fre3vo command, or its alternate configurations, the device returns:
Code:
Locating access point...
This device does not support this exploit.
This device does not support this exploit.
The expoit has failed.
Does anyone know what causes this issue? Or does anyone have an alternative way for gaining temporary root? I spent the evening looking around but haven't found any strong leads.
Device info: Android 2.3.4, HTC Sense version 2.1, Software number 2.32.531.1, Kernel 2.6.35.10-g4dcb781

PopeOnABomb said:
I've tried a few different guides for temp root, but they all rely on fre3v0. The issue I am having is that after running the /data/local/tmp/fre3vo command, or its alternate configurations, the device returns:
Code:
Locating access point...
This device does not support this exploit.
This device does not support this exploit.
The expoit has failed.
Does anyone know what causes this issue? Or does anyone have an alternative way for gaining temporary root? I spent the evening looking around but haven't found any strong leads.
Device info: Android 2.3.4, HTC Sense version 2.1, Software number 2.32.531.1, Kernel 2.6.35.10-g4dcb781
Click to expand...
Click to collapse
the method works trust me print full device info from hboot. just follow the guid on the unlockr.com and if u cant get s-off after they say u should follow the post in the comment or better yet a ton load of proven tuts on this site