Related
I was running MIUI for a couple of weeks with no problem, a couple of days ago the lights on the keyboard and the circular buttons on the phone quit working. I didn't really think much about it, just figured it was a theme I applied just didn't agree with my phone. I tried restoring a nand of MIUI and still no lights. So yesterday I flashed mikshift ROM and still no dice. I'm now running the leak from yesterday and still none of my lights are working. I really don't want to run the ruu and go to sprint unless I absolutely have to.. any ides?
crump84 said:
I was running MIUI for a couple of weeks with no problem, a couple of days ago the lights on the keyboard and the circular buttons on the phone quit working. I didn't really think much about it, just figured it was a theme I applied just didn't agree with my phone. I tried restoring a nand of MIUI and still no lights. So yesterday I flashed mikshift ROM and still no dice. I'm now running the leak from yesterday and still none of my lights are working. I really don't want to run the ruu and go to sprint unless I absolutely have to.. any ides?
Click to expand...
Click to collapse
try running the back to stock zip by newkidd but remove the hboot and recovery img w/out unzipping the .zip.
riggsandroid said:
try running the back to stock zip by newkidd but remove the hboot and recovery img w/out unzipping the .zip.
Click to expand...
Click to collapse
Excuse my ignorance but how would I remove the hboot and recovery without unzipping the file?
Edit: Never mind.. dumb question. Thanks for the suggestion, I'll give it a shot when I have a little free time today.
I have had the same problem using several roms. One fix that worked for me was to disable auto-brightness, reboot, enable auto-bright, reboot again with my finger covering the sensor & both keyboard+onscreen lights work again. Try it if you haven't already.
Sent from my CM7 2.3.4 Shift using XDA Premium App
nvhush said:
I have had the same problem using several roms. One fix that worked for me was to disable auto-brightness, reboot, enable auto-bright, reboot again with my finger covering the sensor & both keyboard+onscreen lights work again. Try it if you haven't already.
Sent from my CM7 2.3.4 Shift using XDA Premium App
Click to expand...
Click to collapse
dont forget to rub your stomach while you pat your head and spin around on one leg while screaming "CM IS THE BEST"
jk but thats what i thought when i read your suggestion
nvhush said:
I have had the same problem using several roms. One fix that worked for me was to disable auto-brightness, reboot, enable auto-bright, reboot again with my finger covering the sensor & both keyboard+onscreen lights work again. Try it if you haven't already.
Sent from my CM7 2.3.4 Shift using XDA Premium App
Click to expand...
Click to collapse
Tried it.. no dice would have been nice if it was that easy. I'm making a nand now and going to try the One zip a little later.
riggsandroid said:
dont forget to rub your stomach while you pat your head and spin around on one leg while screaming "CM IS THE BEST"
jk but thats what i thought when i read your suggestion
Click to expand...
Click to collapse
lol.. yeah seemed a little hoakey but figured it couldn't hurt to try.
riggsandroid said:
dont forget to rub your stomach while you pat your head and spin around on one leg while screaming "CM IS THE BEST"
jk but thats what i thought when i read your suggestion
Click to expand...
Click to collapse
Hey it's not my fault this app adds in a stupid signature ;-)
I can manually remove it but then I have to push more buttons.
CM nightly builds have a lot of issues but Sense roms are a big no-no for privacy reasons. Look at the logs and see for yourself what the damn OS is doing in the background. Sprint & Google don't need to broadcast audio from my phone everytime I take a crap and the cops already get informed when you go over 65mph on the freeway anyways. Have you seen the secret Sprint web app that law enforcement uses on people? I have.
Sent from the not so secure interweb
Here's my own link to the back-to-stock zip. Enjoy.
http://web2.google-it.info/PG06IMG.zip
nvhush said:
Hey it's not my fault this app adds in a stupid signature ;-)
I can manually remove it but then I have to push more buttons.
CM nightly builds have a lot of issues but Sense roms are a big no-no for privacy reasons. Look at the logs and see for yourself what the damn OS is doing in the background. Sprint & Google don't need to broadcast audio from my phone everytime I take a crap and the cops already get informed when you go over 65mph on the freeway anyways. Have you seen the secret Sprint web app that law enforcement uses on people? I have.
Sent from the not so secure interweb
Click to expand...
Click to collapse
Don't worry about that, Riggs is already a CM fanboy And I figure the more they can watch me the less they'll care. I'm boring as hell.
^ Shift Faced
nvhush said:
Here's my own link to the back-to-stock zip. Enjoy.
http://web2.google-it.info/PG06IMG.zip
Click to expand...
Click to collapse
Well it looks like I'm not going to be able to do this until later tonight or tomorrow. Just a question, why is the file size in your link so much smaller than the one in the original thread??
It should be the same file since I've used it before. I will do an MD5 check and reupload if it's a mismatch. Does anyone have the MD5 sum of the original? If so pls post it. Thanks
EDIT:
Here is the updated link: http://web2.google-it.info/PG06IMG-backup.zip
MD5 Checksum: b213b282889e173f53b3a871a4941ffd
Again someone please confirm the checksum. Sorry about the broken link.
Well ran the one "zip" back to stock and still no lights.. Not real sure what the issue is. I have noticed over the past 24 hours that the lights on the keyboard will randomly work but it's not consistent. Guess I'll be heading to Sprint at some point.
How i fix the keyboard lights
This is how i fix the lights on my keyboard, the home and and menu buttons those still dont know how. First you go to settings>display>check automatic brightness>go to system update>update profile> turn off screen (on/off button), this is the important part! unlock your cell phone using the keyboard. Dont press on/off button then slide the keyboard for some random reason that doesnt work, just slide the keyboard on landscape mode then the light of the keyboard should work i think. Hope this work for someone else too.
EDIT:: check out this post for a working Rogers Port :: EDIT
http://forum.xda-developers.com/showthread.php?t=1567817
ckck543 said:
Im flashing now jsee how it goes
http://forum.xda-developers.com/showthread.php?t=1566811
Click to expand...
Click to collapse
nothing works on it dude
It boots but like he said nothing works. No data nothing. So you can swipe screens. I also thought by flashing that and then flashing the At&t zip after that it might work. Hells Nope! Us canadians are shafted
There is a working rogers cwm flashable ics, though. a few of us have it, but im on att and cant say what all works and what doesnt. They have told me most stuff is working, though
xcrazydx said:
There is a working rogers cwm flashable ics, though. a few of us have it, but im on att and cant say what all works and what doesnt. They have told me most stuff is working, though
Click to expand...
Click to collapse
Do you have a link?
Yaaaa I tried it nadda
Sent from my cellular telephone
pixelens said:
Do you have a link?
Click to expand...
Click to collapse
Here it is
http://www.4shared.com/zip/6lRlUQuy/file.html?'
xcrazydx said:
Here it is
http://www.4shared.com/zip/6lRlUQuy/file.html?'
Click to expand...
Click to collapse
Is there a thread that goes with this? Or where did this one come about? Assuming this isn't RaverX3X's T989 rom?
ckck543 said:
Yaaaa I tried it nadda
Sent from my cellular telephone
Click to expand...
Click to collapse
So... I'm really confused now.
Multiple searches, and reading tons of this forum on a daily basis for several months now had led me to the conclusion that the i727 and i727R are identical hardware... how is it possible that this isn't working on Rogers? Could it be something as silly as an environment variable set differently somewhere?
Looking forward to seeing a post that somebody cracks this puzzler soon. As far as I can tell all of the ATT and Rogers ROMS up to now were interchangable...
Have I misunderstood, or are these phones not physically (chipset, hardware...) identical?
Jamie
robinsonj said:
So... I'm really confused now.
Multiple searches, and reading tons of this forum on a daily basis for several months now had led me to the conclusion that the i727 and i727R are identical hardware... how is it possible that this isn't working on Rogers? Could it be something as silly as an environment variable set differently somewhere?
Looking forward to seeing a post that somebody cracks this puzzler soon. As far as I can tell all of the ATT and Rogers ROMS up to now were interchangable...
Have I misunderstood, or are these phones not physically (chipset, hardware...) identical?
Jamie
Click to expand...
Click to collapse
same phone same hw but that leak was built with an ics baseband that rogers lacks in short rogers users are missing a piece of software
Sent from my SAMSUNG-SGH-I727 using Tapatalk
robinsonj said:
So... I'm really confused now.
Multiple searches, and reading tons of this forum on a daily basis for several months now had led me to the conclusion that the i727 and i727R are identical hardware... how is it possible that this isn't working on Rogers? Could it be something as silly as an environment variable set differently somewhere?
Looking forward to seeing a post that somebody cracks this puzzler soon. As far as I can tell all of the ATT and Rogers ROMS up to now were interchangable...
Have I misunderstood, or are these phones not physically (chipset, hardware...) identical?
Jamie
Click to expand...
Click to collapse
They are as identical as two phone with different branding can be. The software is different and that leak is very AT&T specific. So there's something in there that screws up the R. If you take it south and run an AT&T SIM I'll bet it works just fine. The good news is that it is software so someone will find it and make a more generic version. Besides, I'm here to *not* run a stock ROM so I'm staying far away until it settles down and the devs have dived in.
xcrazydx said:
Here it is
Click to expand...
Click to collapse
Alright, beautiful. this works on my Rogers i727R. Just I have the home button issue. I'll look over the phone to see what else is working and not working over the next few hours while I'm in class.
Thanks!
Edit:
1) Receiving errors when trying to download apps on the market.
2) Trying to fix the home button. It works on start up on the homescreen, but once an app opens it stops working.
both known issues with fixes. (the main at&t threads talk about his)
Factory reset until home issue goes away
clear data/force stop to download apps.
joshuaauger said:
Here's how I fixed that. I ran dark side super wipe before install then install, run wipe data factory/ reset, wipe dalvik, fix permissions. (Overkill but hey just in case). After, when first boot comes up and the AT&T setup shows, click cancel then next. RIGHT when that's done pull the battery, before any apps install. Start back up and was fine, no home button issue but still no working reboot menu.
Anyways might work for others.
Click to expand...
Click to collapse
I'm going to try that. Any idea about Market error -101?
Edit:
That did it. Thanks.
Frnicatr said:
I'm going to try that. Any idea about Market error -101?
Click to expand...
Click to collapse
I had that same error on my skyrocket but it fixed after i did a factory reset and the market updated to the play store.
I figured that was the problem, but my market won't update. Anything I can do to force it to update to Play Store?
Frnicatr said:
I figured that was the problem, but my market won't update. Anything I can do to force it to update to Play Store?
Click to expand...
Click to collapse
a while back i had the problem where it wouldn't update so i just had my girlfriend send the Play Store apk to me from her skyrocket with an app sharer and that caused it to work
eventually it will. automatically maybe try clearing data as previously mentioned but then do a soft reset?
y2whisper said:
eventually it will. automatically maybe try clearing data as previously mentioned but then do a soft reset?
Click to expand...
Click to collapse
Yup. It eventually did randomly.
Last problem I'm encountering is I seem to be stuck on 4G and unable to get LTE, unless the icon at the top is having trouble.
Frnicatr said:
Alright, beautiful. this works on my Rogers i727R. Just I have the home button issue. I'll look over the phone to see what else is working and not working over the next few hours while I'm in class.
Thanks!
Edit:
1) Receiving errors when trying to download apps on the market.
2) Trying to fix the home button. It works on start up on the homescreen, but once an app opens it stops working.
Click to expand...
Click to collapse
Nice! Does this update the modem & baseband as well? Can you post a screen of your About Phone settings?
I recently got a new (refurb) GSIII from best buy because my old one turned into a paperweight (randomly from what I told them...I certainly didn't do anything to it! What's a rom? ). Since I got it the vibrate hasn't been working. I don't really care enough about it to swap it for a new one but I recently installed Slim 4.3 b2 on it and noticed that under Advanced options > Device > Haptic the vibration strength is greyed out.
GPS seems to be borked on every rom I try as well...could be something with the PCB or other internals. I may end up swapping it back out.
Does anyone have any experience playing with the vibration unit in these? I'm comfortable cracking it open if it might be something easy but off the top of my head I'm not sure what I'm looking for.
Thanks in advance for any help!
Relentless D said:
I recently got a new (refurb) GSIII from best buy because my old one turned into a paperweight (randomly from what I told them...I certainly didn't do anything to it! What's a rom? ). Since I got it the vibrate hasn't been working. I don't really care enough about it to swap it for a new one but I recently installed Slim 4.3 b2 on it and noticed that under Advanced options > Device > Haptic the vibration strength is greyed out.
Click to expand...
Click to collapse
I think it's greyed out by default cuz my vibrate is fine however that same Haptic setting is greyed out for me on beta 2.
GPS seems to be borked on every rom I try as well...could be something with the PCB or other internals. I may end up swapping it back out.
Click to expand...
Click to collapse
This happen only on 4.3 roms or TW too? Tried tightening the screws on the back of the device? How about resetting the AGPS using an app like GPS Test or GPS Status?
Does anyone have any experience playing with the vibration unit in these? I'm comfortable cracking it open if it might be something easy but off the top of my head I'm not sure what I'm looking for.
Thanks in advance for any help!
Click to expand...
Click to collapse
No personal experience but maybe looking at an ifixit teardown will reveal the location of the vibration motor.
Sent from my SCH-I535 using Tapatalk 4
SlimSnoopOS said:
This happen only on 4.3 roms or TW too? Tried tightening the screws on the back of the device? How about resetting the AGPS using an app like GPS Test or GPS Status?
Click to expand...
Click to collapse
I should have clarified, I have tightened all the screws and tried resetting AGPS. I have NOT reset back to TW. That's a derp worthy fail on my part. I'll give that a shot.
SlimSnoopOS said:
No personal experience but maybe looking at an ifixit teardown will reveal the location of the vibration motor.
Click to expand...
Click to collapse
Forgot about iFixit. I'll check them out in a bit.
Thanks for the suggestions!
Stock rom worked like a champ and I had been running BMS since I switched to 4.3. Reflashed slim with the stock kernel and the GPS worked like a champ.
Vibrate is still a no go but I'll live with it
Relentless D said:
Stock rom worked like a champ and I had been running BMS since I switched to 4.3. Reflashed slim with the stock kernel and the GPS worked like a champ.
Vibrate is still a no go but I'll live with it
Click to expand...
Click to collapse
Hmm, good stuff! Do you think BMS was the reason your GPS was failing?
SlimSnoopOS said:
Hmm, good stuff! Do you think BMS was the reason your GPS was failing?
Click to expand...
Click to collapse
That's the best I can think of. I don't know why else it wasn't working and now it is. It would also explain why I had the issue on slim and CM before that. That being said, it may just be the combo of my phone and that kernel because as far as I know GPS isn't borked for everyone using BMS.
Relentless D said:
That's the best I can think of. I don't know why else it wasn't working and now it is. It would also explain why I had the issue on slim and CM before that. That being said, it may just be the combo of my phone and that kernel because as far as I know GPS isn't borked for everyone using BMS.
Click to expand...
Click to collapse
Fair enough. I noticed GPS issues as well, actually posted it on BMS thread. Oddly enough, reflashing the gapps resolved my GPS issues which kinda surprised me. Maybe try that if you do decide to run BMS again. All's well that ends well, glad you have almost everything resolved!
Hi,
yesterday I was on racetrack Nürburgring and tried my new OnePlus One.
Everything was cool except one thing.
Most time, when I took the OPO out of my trousers, the screen was on and an app was open?
Is there a setting for that, that this never happens? Don't want to share battery lifetime to my pockets and don't want to place calls to the whole world.
Is anyone having same problems or could someone help me?
Settings/Interface/Gesture Shortcuts, disable everything.
Transmitted via Bacon
You forgot display -> double tap to wake
It is scheduled to be fixed by OTA-update xnph28s; before unlocking the proximity sensor checks if the device is currently in a pocket.
See bugreport: https://jira.cyanogenmod.org/browse/BACON-16
Good to see, d4fseeker.
Do you know, when this update is ready for download?
Don't want to disable the Oppo features on opo
They say the update should be released in the next week or two.
Transmitted via Bacon
Where can i see the gerrit of cm11s??
Any news on the date of the next OTA update ?
aka_ronin said:
Any news on the date of the next OTA update ?
Click to expand...
Click to collapse
Typically when its ready, it was posted a week ago in 2 weeks time but no promises as they want to get it right in this OTA.
If you can't wait, you can flash custom ROMs as they already have this commit where it checks the proximity sensor. If the proximity sensor is blocked then gestures will be disabled until the proximity sensor is not blocked.
zephiK said:
Typically when its ready, it was posted a week ago in 2 weeks time but no promises as they want to get it right in this OTA.
If you can't wait, you can flash custom ROMs as they already have this commit where it checks the proximity sensor. If the proximity sensor is blocked then gestures will be disabled until the proximity sensor is not blocked.
Click to expand...
Click to collapse
Thanx for the tip :good: ...but I think I will wait.
d4fseeker said:
It is scheduled to be fixed by OTA-update xnph28s; before unlocking the proximity sensor checks if the device is currently in a pocket.
See bugreport: https://jira.cyanogenmod.org/browse/BACON-16
Click to expand...
Click to collapse
Does paranoid android fix this?
jameslfc5 said:
Does paranoid android fix this?
Click to expand...
Click to collapse
I don't use paranoid android but go into their thread and search for the keyword proximity. Chances are they probably did include it.
Sent from my One using Tapatalk
zephiK said:
I don't use paranoid android but go into their thread and search for the keyword proximity. Chances are they probably did include it.
Sent from my One using Tapatalk
Click to expand...
Click to collapse
Does paranoid android have the lockscreen gestures then?
Thanks
jameslfc5 said:
Does paranoid android have the lockscreen gestures then?
Thanks
Click to expand...
Click to collapse
Like I said before, I don't use Paranoid Android. Go into the thread and search for the keyword "lockscreen" ... if the ROM is based on CM for the OPO then it will have the gesture controls.
Edit: Heres your answer, http://forum.xda-developers.com/showthread.php?p=53677403&highlight=gesture#post53677403 next time just search
Not only as stable as CM is, it includes all device specific features of CM like offscreen gestures, Quickboot, Soft/hard buttons...
Click to expand...
Click to collapse
FormelLMS said:
Hi,
yesterday I was on racetrack Nürburgring and tried my new OnePlus One.
Everything was cool except one thing.
Most time, when I took the OPO out of my trousers, the screen was on and an app was open?
Is there a setting for that, that this never happens? Don't want to share battery lifetime to my pockets and don't want to place calls to the whole world.
Is anyone having same problems or could someone help me?
Click to expand...
Click to collapse
You either need to upgrade the trousers or keep your hands where they belong - in someone else's trousers.
Mike
mhannigan said:
You either need to upgrade the trousers or keep your hands where they belong - in someone else's trousers.
Mike
Click to expand...
Click to collapse
Or just disable the "Double tap to wake" feature like I did... ...and wait for the next OTA update.
aka_ronin said:
Or just disable the "Double tap to wake" feature like I did... ...and wait for the next OTA update.
Click to expand...
Click to collapse
That is a FIX and not a full-fledged semi-effective workaround. Unacceptable, but thanks for trying.
Mike
This is CM inc's chance to show what they can do.
You know they have a One Plus as a test phone but they let it go out with low call volume and sub par signal strength. As well as touch screen problems and more. Just look at the bug reports. There no hiding them.
Software makes the phone work so to me that is what I have to look at.
All in all its a great phone I just expect more from CM inc.
Vortex1969 said:
This is CM inc's chance to show what they can do.
You know they have a One Plus as a test phone but they let it go out with low call volume and sub par signal strength. As well as touch screen problems and more. Just look at the bug reports. There no hiding them.
Software makes the phone work so to me that is what I have to look at.
All in all its a great phone I just expect more from CM inc.
Click to expand...
Click to collapse
To be fair the phone is still in its infancy stages and is invite only. So in a way you can say we paid for the phone to be "internal beta testers" and when the phone is not invite only thats when its out for the masses.
I agree with you though, these major problems should have been addressed in a hotfix rather than having users wait for the next OTA. Luckily for the most of us, we're able to fix it in our own hands but for those who aren't then they'll just have to wait.
zephiK said:
To be fair the phone is still in its infancy stages and is invite only. So in a way you can say we paid for the phone to be "internal beta testers" and when the phone is not invite only thats when its out for the masses.
I agree with you though, these major problems should have been addressed in a hotfix rather than having users wait for the next OTA. Luckily for the most of us, we're able to fix it in our own hands but for those who aren't then they'll just have to wait.
Click to expand...
Click to collapse
I agree with that and thank you for one of the fixes.[emoji3]
Q&A for [ROM][5.0.1_r1][OFFICIAL][GPL] LiquidSmooth v4.0 - D850 - 12|8|14
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.0.1_r1][OFFICIAL][GPL] LiquidSmooth v4.0 - D850 - 12|8|14. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Bluebooth
I am so glad Liquid Smooth has a LP ROM for the D850! I have tried a couple of other LP ROMs and Bluetooth always seems to be broken. I was wondering if anyone can confirm that Bluetooth is working, specifically with Android Wear. If no one has tested it I might flash this later today and test it.
Update - installed ROM and it looks like Bluetooth is a no go right now!
Update 2 - Uninstalled Android Wear and reset the GWatch and now they are syncing. Seems to have been an issue with Android Wear, seeing both the phone and GWatch would pair with other devices.
Deleted
---------- Post added at 08:27 PM ---------- Previous post was at 08:22 PM ----------
Gotta dip out. Cellular signal dropping in and out a lot.... And video camera fc.... Awesome build will be back on. Next build. Great work!
2SHAYNEZ
Every Lollipop Rom I've tried, data drops in and out.....i end up having to resort back to KitKat all because the data drops....question is: WHY??????
blively2 said:
Every Lollipop Rom I've tried, data drops in and out.....i end up having to resort back to KitKat all because the data drops....question is: WHY??????
Click to expand...
Click to collapse
RIL (radio interface layer)
Just needs to adapt to new sources in lollipop, some people will put up with this and some won't
Sorry for the trouble
Not a big deal I'm sure it will be ironed out.:thumbup:
2SHAYNEZ
bunchies said:
RIL (radio interface layer)
Just needs to adapt to new sources in lollipop, some people will put up with this and some won't
Sorry for the trouble
Click to expand...
Click to collapse
No need to apologize....im just frustrated because i have no idea why its caused or how to prevent it. Especially sine i love lollipop so much and the signals the only thing from making the switch permanently...thats all.
blively2 said:
No need to apologize....im just frustrated because i have no idea why its caused or how to prevent it. Especially sine i love lollipop so much and the signals the only thing from making the switch permanently...thats all.
Click to expand...
Click to collapse
Np, doesn't bother me
If I was a user I would want to know why and as a dev I gave a straight answer
For right now I'm having to use terminal emulator to connect to data on boot "su" "killall rild"
This is sort of strange... Both on this ROM and CM I occasionally see a star on my status bar just to the left of the WiFi signal indicator. Anyone know what that is?
bunchies said:
Np, doesn't bother me
If I was a user I would want to know why and as a dev I gave a straight answer
For right now I'm having to use terminal emulator to connect to data on boot "su" "killall rild"
Click to expand...
Click to collapse
So, thats all thats needed to prevent data drop between reboots???
blively2 said:
So, thats all thats needed to prevent data drop between reboots???
Click to expand...
Click to collapse
Between reboots yes, I've seen testers rarely drop a call
Call drops haven't happened to me yet but its been reported, I personally talk on the phone usually a few hours a week
---------- Post added at 08:05 PM ---------- Previous post was at 08:04 PM ----------
elmerct said:
This is sort of strange... Both on this ROM and CM I occasionally see a star on my status bar just to the left of the WiFi signal indicator. Anyone know what that is?
Click to expand...
Click to collapse
I think star means you silenced notifications, Google lollipop star
Or something similar since its a lollipop thing
did anyone else have trouble with getting data to work? I wish I could test this rom some more but I kinda jumped the gun on this one considering I should be studying
tomdanoob said:
did anyone else have trouble with getting data to work? I wish I could test this rom some more but I kinda jumped the gun on this one considering I should be studying
Click to expand...
Click to collapse
IPV6 for APN
If its on reboot try what I said a few posts back http://forum.xda-developers.com/showthread.php?p=57362018
How about this dark materia thing I read in the development o.p. I couldn't find it and thought I looked everywhere.
Sent from my LG-D850 using XDA Free mobile app
noobchef said:
How about this dark materia thing I read in the development o.p. I couldn't find it and thought I looked everywhere.
Sent from my LG-D850 using XDA Free mobile app
Click to expand...
Click to collapse
This basically
Phone Call voice drops..
Anyone have a solution for this yet. About 15-30 Seconds into the call the call drops both parties voices and you can not here each other..... Thanks for any help. Also looked in Q&A no mention.
skype on LS v4.0
Anyone having trouble with Skype calling.. it drops after a few mins and when receiving a call it only rings once.. Is it skype or is it lollipop or the Rom?
But besides that its running awesome.. going to use it as my DD..
Great Job.. can't wait to see the tweaks you guys add to the Rom..
I changed the dpi rebooted and all was fine. I rebooted again and bootlooped. FWIW, had this problem with early builds of CM, but that was fixed a few updates ago.
bunchies said:
IPV6 for APN
If its on reboot try what I said a few posts back http://forum.xda-developers.com/showthread.php?p=57362018
Click to expand...
Click to collapse
Thank you, I'll test this rom at more when I'm done with finals
So by all means flame away if that's what gets you to sleep at night..
I just want to share my issues
I'm still a user.. not lookin' to switch.. just sharin' the problems I have
A lot of times when I'm on a call & the screen shuts off.. I have to press power to get it to come back on.. even double tap doesn't work
I've tried disabling "Prevent Accidental Wake" & that hasn't seemed to solve it
I see the settings option about disabling Immersive Mode Messages.. buuut no option to enable Immersive Mode
No custom Power Menu Granted that may not be a feature anyway..
I noticed in the OP System App Remover was mentioned.. I'm not finding that.. :-/
If I had to guess I would say the double tap to wake / sleep working reliably is a stock rom thing.. currently in the works for AOSP roms yeah ? Double to wake works pretty consistently.. buuut the Double to sleep only works as the CM status bar tap setting rather than anywhere
What else what else..
Oh so I've got Skype installed.. & every time I try to make a call despite hitting Always.. I'm still asked if I want to use Phone or Skype
I'm not *****in'.. I'm not upset.. this is a forum.. forums exist for the purpose of discussion.. so I am sharing my experience & grievances using this as a daily driver..
Oh oh oh uhh.. also.. I can't seem to get the phone into silent mode now.. only vibrate for the quietest
/salute