I am unable to mount the external SDcard with CWM 6.0.2.7 or any earlier versions. As a result I cannot backup to or restore from the external SDcard. If I boot into CM10.1 the card mounts OK & I can read & write files to it. The same happens if I try a different SDcard. Any ideas what's going on?
dwl99 said:
I am unable to mount the external SDcard with CWM 6.0.2.7 or any earlier versions. As a result I cannot backup to or restore from the external SDcard. If I boot into CM10.1 the card mounts OK & I can read & write files to it. The same happens if I try a different SDcard. Any ideas what's going on?
Click to expand...
Click to collapse
Hi,
I have a P3110 with CWM6.0.2.7. I had the same problem. I simply formated my micro-SD card with the tablet, and now I can backup to and restore from my micro-SD card. (I found this somewhere in the forum by searching.)
3to4 said:
Hi,
I have a P3110 with CWM6.0.2.7. I had the same problem. I simply formated my micro-SD card with the tablet, and now I can backup to and restore from my micro-SD card. (I found this somewhere in the forum by searching.)
Click to expand...
Click to collapse
Thanks for the reply, I had also searched the forum & google but did not find a solution. I cannot mount the SD card in CWM to format it and there doesn't seem to be a way to format it from CM10.1.
[A]
Try erasing everything on the m-sd card. Put it in you tablet. Then go to settings>storage>micro sd. and select the option to format it.
Hope that helps.
noahthedominator said:
Try erasing everything on the m-sd card. Put it in you tablet. Then go to settings>storage>micro sd. and select the option to format it.
Hope that helps.
Click to expand...
Click to collapse
CM 10.1 doesn't appear to have this option under Storage settings
Could the reason for CWM not mounting the SD card be that CM10 has different mount points from the stock ROM for the SD card?
Mystery solved! I tried CWM formatting the SD card in my P5100 which has no problems doing CWM backups to external SD cards - and it would not mount. I then dug out a Samsung branded microSD card, stuck it in the P3110 and it worked first time! It's now happily backing up to the external SD. The 2 cards that didn't work were generic and Sandisk. Thanks for the suggestions.
Related
Hey, this is my first tablet. The only other android device I own is a Nexus One (and I've done a LOT of stuff with it, so please don't assume I'm a complete noob!)
I realize that my transformer has 16GB of internal storage... is there a way I can backup my data so a partition or something so when I do a factory reset I don't lose all my /sdcard data? Similar to how I do stuff on my nexus one? My buddy with the nexus s doesn't have to pop in an SD card or anything (not that he even can) and he can still flash roms and his user data is still safe. How are people doing this on the transformer?
As of right now CWM recovry only work with an external micro sd card.
Sent from my Transformer TF101 using Tapatalk
The problem with the TF is that /data and /sdcard (internal) are part of the same partition, so I suppose if you wipe /data, you will be wiping also /sdcard. Thats the maily reason of using an external SD card.
Aside from that, Root Toolkit can save a complete image of your tablet via APX into your PC (if you don't want to use CWM).
http://forum.xda-developers.com/showthread.php?t=1419894
^^^ how to use external sd card as main sd card, am not sure how this works with CWM
bob dylan said:
am not sure how this works with CWM
Click to expand...
Click to collapse
CWM should behave equal since you're linking your external sd card to /sdcard. If CWM uses /Removable/MicroSD to mount the external sd card, you won't notice any difference.
I wanted to wipe my phone entirely and start clean before installing Virtuous Inq but I messed up somehow and now my SD Card won't mount. I had MIUI running on my HTC Sensation.
Here's what I did to my phone today -
1. First I copied my entire SD card to my computer.
2. Next I formated my SD card and deleted everything on my phone.
3. Then I went into Clockwork and Wiped Date/Factory reset.
I was hoping it would bring me to Stock but that didn't happen. It just reset MIUI. Then when I tried to mount my SD it just says I can remove even when I click mount.
Anyone know what I can do?
Nymbus said:
I wanted to wipe my phone entirely and start clean before installing Virtuous Inq but I messed up somehow and now my SD Card won't mount. I had MIUI running on my HTC Sensation.
Here's what I did to my phone today -
1. First I copied my entire SD card to my computer.
2. Next I formated my SD card and deleted everything on my phone.
3. Then I went into Clockwork and Wiped Date/Factory reset.
I was hoping it would bring me to Stock but that didn't happen. It just reset MIUI. Then when I tried to mount my SD it just says I can remove even when I click mount.
Anyone know what I can do?
Click to expand...
Click to collapse
Bump...can anyone help?
I suspect the problem was in the formatting of your SD card. For the phone to mount it you probably need it formatted as FAT32. Did you format using a computer? Win/Mac/Linux?
pyrilium said:
I suspect the problem was in the formatting of your SD card. For the phone to mount it you probably need it formatted as FAT32. Did you format using a computer? Win/Mac/Linux?
Click to expand...
Click to collapse
This is the same SD card that I got w/ the Sensation. I never had to format or do anything to it.
OK, but you said in your original post that you formatted the SD card (item 2). If you formatted the SD card using a filesystem other than FAT32 (e.g. NTFS or HFS+) then your phone won't be able to mount it - that was what came to mind.
Have you tried to remount it using adb?
CODE: mount -o rw,remount -t /sdcard
Sent from my HTC Pyramid using xda premium
http://forum.xda-developers.com/showpost.php?p=10878511&postcount=8311
Please see the above thread. I think the trick may be you need to insert the formatted sd card into the phone while its running VI.
Nymbus said:
I wanted to wipe my phone entirely and start clean before installing Virtuous Inq but I messed up somehow and now my SD Card won't mount. I had MIUI running on my HTC Sensation.
Here's what I did to my phone today -
1. First I copied my entire SD card to my computer.
2. Next I formated my SD card and deleted everything on my phone.
3. Then I went into Clockwork and Wiped Date/Factory reset.
I was hoping it would bring me to Stock but that didn't happen. It just reset MIUI. Then when I tried to mount my SD it just says I can remove even when I click mount.
Anyone know what I can do?
Click to expand...
Click to collapse
pyrilium said:
OK, but you said in your original post that you formatted the SD card (item 2). If you formatted the SD card using a filesystem other than FAT32 (e.g. NTFS or HFS+) then your phone won't be able to mount it - that was what came to mind.
Click to expand...
Click to collapse
Well I formatted the SD card with MIUI I thought that would wipe it clean so I start a new basically. Apparently that wasn't the case.
stringer7 said:
Have you tried to remount it using adb?
CODE: mount -o rw,remount -t /sdcard
Sent from my HTC Pyramid using xda premium
Click to expand...
Click to collapse
No because I don't have a Micro SD Card Reader. Without that am I pretty much screwed...?
federra7 said:
http://forum.xda-developers.com/showpost.php?p=10878511&postcount=8311
Please see the above thread. I think the trick may be you need to insert the formatted sd card into the phone while its running VI.
Click to expand...
Click to collapse
I don't have a Micro SD Card Reader. Does that mean I have no other options?
Bump. Character Limit.
What ROM recovery are using right now. If you are using 4EXT Recovery it have format tools on the recovery. If CWM wipe the sd card is same as format. Or you can't just mount the card using ROM recovery and format on PC.
I had the same problem with the SD card. Formatting in CWM didn't help.
Resolved it by these steps:
1. Format the new SD card with fat32 on pc.
2. Switch off the phone and remove the battery.
3. Insert the new SD and the battery back.
4. Power on in recovery mode (volume down+power).
5. Find "Partition SD card" and partition it with 64KB (CWM will partition the SD to 4GB). It should do the Mounting.
6. Reboot the phone normally.
7. Go to Settings>Storage. It should be showing 4GB free space on SD.
8. In storage options pick "Unmount SD card" and then pick "Erase SD card" in same menu, Don't remove the card from phone!!! , it shoud bring SD back to original storage.
9. Mount SD back and copy back the data from the original SD.
Hope it'll be heplful.
In the process of upgrading ICS ROM's I think I messed up my CWM recovery (3.2.0.1)
I mistakenly formatted staging and pretty much everything else that can be formatted within the mounts and storage part of CWM.
Now recovery cannot see my Micro SDCard, it can't mount it either. Nor can I mount USB storage.
I tried installing the nvflash version of the rogue recovery, then reflashed the older 3.2.0.1 recovery from Roach to see if that would reset things, but I'm still having the same issues with not being able to access my MicroSD card.
I want to stick with this recovery as I don't like having all the various ROM files on the internal card (which is why I bought a 32GB external that I can keep all of the stuff I download from XDA).
So my current attempt is to go back to HC by using the revolver NVFlash, which I am hoping fixes my recovery also.
EDIT: this didn't resolve things for me either!! Argh! Still can't mount the MicroSD card.
If it doesn't, can anyone offer suggestions?
Thanks!
The Team Rouge recovery read from external micro sd card as well.
baseballfanz said:
The Team Rouge recovery read from external micro sd card as well.
Click to expand...
Click to collapse
Thanks...but for some reason my TF can't mount the MicroSD (external) anymore, whether it's Roach 3.2.0.1 or Team Rogue.
I've nvflashed back to revolver 3.11 HC, and the SD card shows up fine in the ROM, but not in recovery.
Something has gone wrong and I am not sure how to resolve.
I wonder if putting the device completely back to stock (unrooted also) would help?
I would try and format your sd card again on a PC, try sd formatter
https://www.sdcard.org/consumers/formatter_3/SDFormatterv3.0.zip
Just copy the content of the micro sd card to a pc, format and copy it back.
Not sure if I'm posting in the correct place I'm attempting to Flash the Synergy Rom and with CWM it doesnt see my Ext SD Card when i'm in recovery. So I went ahead and installed the zip to the main and I'm able to install it from there. Is there something that I'm missing?
Thanks for any help!
-Scoob
CWM will only see fat32 formatted ext sd cards.
If you got a large card it is most likely formatted with ExFat which is not compatible with any custom recovery.
Sent from my Galaxy S3
TWRP can't see EXT SDCARD and I am unable to boot into FLASHBOOOT? Any suggestions?
Thank you....
Same problem...figured it out yet?
burnface said:
Same problem...figured it out yet?
Click to expand...
Click to collapse
Per pio_masaki, I reinstalled TWRP and remounted the External SD Card. Each time I go into TWRP I need to remount. Oherwise, I lose access to the SD Card.