Related
Hi all,
I have Samsung tab GT-P3100 7 inches.
i accidently flashed my tab gt p3100 with wrong firmware of gt p3110 .
my tab is calling facility . but after the wrong firmware flash there is no option to call... :crying:
Now in settings -->about.. its showing model GT p3110
Please help me to flash to its original state.
thanks and regards
There is no problem with that but.. Try to find the correct firmware in Androd Development zone, so you search which rom you like the most, and you just flash it on recovery.
Regards
Mord Fustang said:
There is no problem with that but.. Try to find the correct firmware in Androd Development zone, so you search which rom you like the most, and you just flash it on recovery.
Regards
Click to expand...
Click to collapse
how to flash in recovery mode could u plz explain...it
Deleted...
Can someone point me in the right direction? I root my phones all the time and bought this tab for my daughter the other day for a steal and would like to get kitkat on it! It seems to be running very slowly and choppy with 4.2.2 on it! Any help would be much appreciated!
Adam1422 said:
Can someone point me in the right direction? I root my phones all the time and bought this tab for my daughter the other day for a steal and would like to get kitkat on it! It seems to be running very slowly and choppy with 4.2.2 on it! Any help would be much appreciated!
Click to expand...
Click to collapse
first try to wipe cache partition in recovery and even then if it is laggy uninstall unwanted system apps which you dont use and you can also try scripts like fly on mod or crossbreeder to boost speed upto a level
aditya rathee said:
first try to wipe cache partition in recovery and even then if it is laggy uninstall unwanted system apps which you dont use and you can also try scripts like fly on mod or crossbreeder to boost speed upto a level
Click to expand...
Click to collapse
I have already done a factory reset. I dont have root at this point so i cant uninstall any of the bloatware. Can i run scripts like crossbreeder with out having root? I would like to get a kitkat rom flashed. may cm11
Adam1422 said:
I have already done a factory reset. I dont have root at this point so i cant uninstall any of the bloatware. Can i run scripts like crossbreeder with out having root? I would like to get a kitkat rom flashed. may cm11
Click to expand...
Click to collapse
sorry bro but without root you cannot run those scripts
aditya rathee said:
sorry bro but without root you cannot run those scripts
Click to expand...
Click to collapse
So whats the best way for me to get root?
Adam1422 said:
So whats the best way for me to get root?
Click to expand...
Click to collapse
download the cf root file and then root your tab through odin that it buddy
it is very simple
I need help for my galaxy tab2 7.0 p3100
Can someone help me? my tablet is not working anymore..its not booting..i can only see the samsung galaxy tab2 7.0 logo..please help me fix my tablet... :crying: :crying: :crying: :crying:
aditya rathee said:
download the cf root file and then root your tab through odin that it buddy
it is very simple
Click to expand...
Click to collapse
The problem that i am running into is finding the right drivers. I tried the samsung site but it just give me kies exe. When i connect my tab to the computer it comes up as an unknown device! Do you happen to know where i can get the correct samsung drivers for a win7 pc?
Adam1422 said:
The problem that i am running into is finding the right drivers. I tried the samsung site but it just give me kies exe. When i connect my tab to the computer it comes up as an unknown device! Do you happen to know where i can get the correct samsung drivers for a win7 pc?
Click to expand...
Click to collapse
in google search for sam usb drivers and open the xda thread that is shown in results and download and have fun
visitacion said:
Can someone help me? my tablet is not working anymore..its not booting..i can only see the samsung galaxy tab2 7.0 logo..please help me fix my tablet... :crying: :crying: :crying: :crying:
Click to expand...
Click to collapse
If u r on stock ROM or aosp rom download appropriate kernel such as next or agni
Then flash them in recovery
Recovery should be working.....
Volume up+power button
Reply if it works
ashwin007 said:
If u r on stock ROM or aosp rom download appropriate kernel such as next or agni
Then flash them in recovery
Recovery should be working.....
Volume up+power button
Reply if it works
Click to expand...
Click to collapse
how to fix boot loop and where I can find a rom that suits my tablet
Galaxy tab 2 7.0 p3100 jellybean 4.1.2
recovery mode is working..
visitacion said:
how to fix boot loop and where I can find a rom that suits my tablet
Galaxy tab 2 7.0 p3100 jellybean 4.1.2
recovery mode is working..
Click to expand...
Click to collapse
If u r on stock recovery
Refer this thread http://forum.xda-developers.com/showthread.php?t=2535083
And flash philz recovery
And then http://forum.xda-developers.com/galaxy-tab-2/10-inch-development
Go to above link and choose from the abode of ROMs according to your taste??
visitacion said:
Can someone help me? my tablet is not working anymore..its not booting..i can only see the samsung galaxy tab2 7.0 logo..please help me fix my tablet... :crying: :crying: :crying: :crying:
Click to expand...
Click to collapse
Same happened once on my galaxy y duos... I managed to fix it by downloading stock rom which is flashable by odin... Then went to download mode and flashed the rom then it booted just fine..
Hi,
I bought my Samsung Galaxy Note 10.1 (SHW-M485W) - KT from SOUTH KOREA
I tried to upgrade , but its soft bricked. It was struck at samsung logo.
I tried in the internet but I could not find any rom with model number shw-m485w.
Can any one help me.
Thank you.
hi guys
sirishkv said:
Hi,
I bought my Samsung Galaxy Note 10.1 (SHW-M485W) - KT from SOUTH KOREA
I tried to upgrade , but its soft bricked. It was struck at samsung logo.
I tried in the internet but I could not find any rom with model number shw-m485w.
Can any one help me.
Thank you.
Click to expand...
Click to collapse
Hi Guys, I am desperately looking for your help and guidance. I have flashed a very near model SHW-M480W , firmware. but no use.
No custom roms are working.
Your help is greatly appreciated.
sirishkv said:
Hi Guys, I am desperately looking for your help and guidance. I have flashed a very near model SHW-M480W , firmware. but no use.
No custom roms are working.
Your help is greatly appreciated.
Click to expand...
Click to collapse
Do you know the exact specs of this device. you should look these up and compare them to the other 10.1 devices. I AM not sure any rom on this forum will help ..
Good Luck...
erica_renee said:
Do you know the exact specs of this device. you should look these up and compare them to the other 10.1 devices. I AM not sure any rom on this forum will help ..
Good Luck...
Click to expand...
Click to collapse
Specs for SHW-M485W
1. WiFi only
2. 16gb internal memory
3. Build in Korea
I have found similar products. I flash those roms (SHW-480W) through oidn at the end of processing the odin giving result as Failed.
When I use the other model Rom having similar specs (GT-N8013) its failing at the beginning only saying the model number is not correct.
Any other alternatives like changing model number etc.
sirishkv said:
Specs for SHW-M485W
1. WiFi only
2. 16gb internal memory
3. Build in Korea
I have found similar products. I flash those roms (SHW-480W) through oidn at the end of processing the odin giving result as Failed.
When I use the other model Rom having similar specs (GT-N8013) its failing at the beginning only saying the model number is not correct.
Any other alternatives like changing model number etc.
Click to expand...
Click to collapse
That likely means your boot loader is stopping you from flashing a rom not meant for you device. YOU May be able to pull the boot-loader out of the rom then reflash . DO SO WITH CAUTION ... Also some have had been able to flash with mobile odin. I have not used it so have no clue.. Because you do not have the n8013 exactly to what i have . READ Other info before you follow my advice ...
Good Luck.
2350
erica_renee said:
That likely means your boot loader is stopping you from flashing a rom not meant for you device. YOU May be able to pull the boot-loader out of the rom then reflash . DO SO WITH CAUTION ... Also some have had been able to flash with mobile odin. I have not used it so have no clue.. Because you do not have the n8013 exactly to what i have . READ Other info before you follow my advice ...
Good Luck.
Click to expand...
Click to collapse
Thanks for the suggestion. I will try and post the results.
Hel needed. Same problem you had
sirishkv said:
Thanks for the suggestion. I will try and post the results.
Click to expand...
Click to collapse
Hi sirishkv,
I have exactly the same tab model and the same problem of the tablet being freezed at the samsung logo. Could you solve it? Would you mind sharing? Is there a way of keeping the personal data intact or recover it somehow?
I run out of ideas to solve this so thank you so much for your help.
PIUGA said:
Hi sirishkv,
I have exactly the same tab model and the same problem of the tablet being freezed at the samsung logo. Could you solve it? Would you mind sharing? Is there a way of keeping the personal data intact or recover it somehow?
I run out of ideas to solve this so thank you so much for your help.
Click to expand...
Click to collapse
There is no way you can recover your personal data at this stage. All you can do is bring it back to live.
I found the original Rom and flashed back with the same rom. The Note is back to normal.
Try in the internet for the factory firmware with the same model. you will get it. Good luck. :good::good::good:
sirishkv said:
There is no way you can recover your personal data at this stage. All you can do is bring it back to live.
I found the original Rom and flashed back with the same rom. The Note is back to normal.
Try in the internet for the factory firmware with the same model. you will get it. Good luck. :good::good::good:
Click to expand...
Click to collapse
Hi dear mate.
i have same device m485w. I bought it a few days ago. But os update stopped. Just jelly...
so i ported 4.4.4 based rom for m485w by using m480w firmware.
i modified kernel, boot.img3
now it works well.
Also for gnabo rom v8.0 i modified. It works well. It will solve be loved our devices' brick.
if some user want to this, i will share and make thread. But there are a few user using m485w device.
do you want? Thank you
rasido said:
Hi dear mate.
i have same device m485w. I bought it a few days ago. But os update stopped. Just jelly...
so i ported 4.4.4 based rom for m485w by using m480w firmware.
i modified kernel, boot.img3
now it works well.
Also for gnabo rom v8.0 i modified. It works well. It will solve be loved our devices' brick.
if some user want to this, i will share and make thread. But there are a few user using m485w device.
do you want? Thank you
Click to expand...
Click to collapse
Hi,
Sure that would definitely help. My Note M485W is still on Jelly and not able to get any updates.
Please explain the procedure to make the device upgrade-able with the suitable ROM... etc
Thanks in advance.
sirishkv said:
Hi,
Sure that would definitely help. My Note M485W is still on Jelly and not able to get any updates.
Please explain the procedure to make the device upgrade-able with the suitable ROM... etc
Thanks in advance.
Click to expand...
Click to collapse
Hi
ok. In this weekend, i will upload samsung latest kk4.4.4 ni6 version modified by me.
now i am asking permit about using kernel. I have already done kernel work.
you may hope that.
and personally can u help me? To work this my param.bin is changed as n8000
it is same with our device. But for samsung service center i should rollback because language is different
If u help me i will give you flashing zip. This zip file copy m485 param.bin to sacard. whether u help me or not
tonight, personally i will pm with. Gnabo v8 version.4.4.2 for m485 device.
and after getting permission from boeffla. I will upload 4.4.4 version.
pls. Help me. i will help our m485 user. Thank u
rasido said:
Hi
ok. In this weekend, i will upload samsung latest kk4.4.4 ni6 version modified by me.
now i am asking permit about using kernel. I have already done kernel work.
you may hope that.
and personally can u help me? To work this my param.bin is changed as n8000
it is same with our device. But for samsung service center i should rollback because language is different
If u help me i will give you flashing zip. This zip file copy m485 param.bin to sacard. whether u help me or not
tonight, personally i will pm with. Gnabo v8 version.4.4.2 for m485 device.
and after getting permission from boeffla. I will upload 4.4.4 version.
pls. Help me. i will help our m485 user. Thank u
Click to expand...
Click to collapse
I am not getting what help you are requesting, its too technical for me. I am not that techie.
But I am willing to help if you need some thing to be extracted from M485W and provide to you.
sirishkv said:
I am not getting what help you are requesting, its too technical for me. I am not that techie.
But I am willing to help if you need some thing to be extracted from M485W and provide to you.
Click to expand...
Click to collapse
Hi
it is very easy. I just give .zip file. Just flash by using twrp or phills recovery.
after flashing. Param.bin saved your sdcard automatically..
thank you. It is very safety
rasido said:
Hi
it is very easy. I just give .zip file. Just flash by using twrp or phills recovery.
after flashing. Param.bin saved your sdcard automatically..
thank you. It is very safety
Click to expand...
Click to collapse
Sure. I am ok to help you. Provide me the .zip file.
Note: Samsung Galaxy note 10.1 - SHW-M485W (Android 4.0.x) does not support SD card. There is a provision to SD card but I cannot move any apps. So is there any way to give you the param.bin
sirishkv said:
Sure. I am ok to help you. Provide me the .zip file.
Note: Samsung Galaxy note 10.1 - SHW-M485W (Android 4.0.x) does not support SD card. There is a provision to SD card but I cannot move any apps. So is there any way to give you the param.bin
Click to expand...
Click to collapse
Hi ok.
Don't worry about that. There are 2 ways.
1. After installing gnabo v8.0 rom, flash .zip
His rom is great. sdcard limitation was solved in his rom.
2. But i think that .zip will work. It is not related os. ^^
How can android make directory and files in sdcard when stalling by using odin or something
Are u use rooted rom? It is impotant.
sirishkv said:
Sure. I am ok to help you. Provide me the .zip file.
Note: Samsung Galaxy note 10.1 - SHW-M485W (Android 4.0.x) does not support SD card. There is a provision to SD card but I cannot move any apps. So is there any way to give you the param.bin
Click to expand...
Click to collapse
hi I sent pm with some files. Check your pm
Hello, I need the original boot s7562, to make a change in the boot logo, that will be a small "MOD" for the Exquisite Rom,Please attach it in the responses, I I will be very grateful
mois2511 said:
Hello, I need the original boot s7562, to make a change in the boot logo, that will be a small "MOD" for the Exquisite Rom,Please attach it in the responses, I I will be very grateful
Click to expand...
Click to collapse
Are u still developing for s7562?
i know u bricked your s duos
Ritik99 said:
Are u still developing for s7562?
i know u bricked your s duos
Click to expand...
Click to collapse
Yes, I bricked my phone, and I do not develop more for the s7562. well I can still edit some apk's to the S duos just that.
is there anybody who can help me..??
I post on xda its my 4 no post about it but nobody help me.
I am using samsung j1 ace sm-j111f.
Chipset:sc8830
version:5.1.1(lolipop)
Is there anybbody who use coustom recovery on this phone.
Or anybody who can build a custom recovery.
in my phone flashfy not working.. it saying nothing. what can I do. plz help me plz....plz.. my stok recovery link
drive.google.com/file/d/0B-XcW9YJpyynbTU0YUoxeFphU2c/view?usp=docslist_api
I don't know if a recovery is available for your device. Building one is hard as well so you might be out of luck.
Sent from my Nexus 7 using Tapatalk
If you know a similar device running on same soc you might be able to port it quite easily with help of guides.
tys0n said:
If you know a similar device running on same soc you might be able to port it quite easily with help of guides.
Click to expand...
Click to collapse
Can you plz port it for me.. plz..
And flashfy not working what to do...??
any costum rom for this device ??
Here is full guide about it https://forum.xda-developers.com/android/development/root-samsung-galaxy-j1-ace-sm-j111m-f-t3395520
I recently installed a custom rom. So please can anyone upload the pre installed pdf.
Can anyone upload the boot logo partition (param.lfs /param.img) of J111F. I accidently flashed boot image to that location and now i dont have a boot logo it displays screnn before shut down with colour change please help.