Database Info

[Q] Any idea why I can't update my phone?

I'm not able to post links so I've had to attach the images instead:
I have an HTC One XL - which I believe is from HK (when i reset to default, everything is in Chinese and the time/date is HK)
Since getting it in December, I've not been able to do a single update.
The software update gives me
update.png
after which i get this
fail1.jpg
So I've tried to bypass that and downloaded the OTA 4.1 rom and trying to flash gives me this
fail2.jpg
I also tried to do the RUU install and that failed too.
Any ideas?

I can't see your photos, they are coming up blank for me. But are you completely stock, or do you have custom recovery? Is your bootloader unlocked?
Phone needs to have stock recovery to install OTAs.
Bootloader needs to be LOCKED or RELOCKED to run RUU.

redpoint73 said:
I can't see your photos, they are coming up blank for me. But are you completely stock, or do you have custom recovery? Is your bootloader unlocked?
Phone needs to have stock recovery to install OTAs.
Bootloader needs to be LOCKED or RELOCKED to run RUU.
Click to expand...
Click to collapse
sorry, fixed the images as best as i can.
I'm completely on stock rom and i unlocked my bootloader this morning trying to update.
I'll try relocking it and flashing.
thanks

You are using cwm you need factory recovery to get ota
Sent from my VENOMized HoxL

area51avenger said:
You are using cwm you need factory recovery to get ota
Sent from my VENOMized HoxL
Click to expand...
Click to collapse
alrighty. I was trying to backup my current rom, unlocked bootloader, lost everything but got cwm on.
Give me 10, i'll see what i can see and will update.
thanks

I give up!
I couldn't get it to work, flashed CM10 and found it buggy, gone back to stock and still no updates.
I've tried to update the hboot by using the JBFWTOOL and nothing happens, tried doing it manually and it fails (failed <remote: 99 unknown fail>
There must be a way, but I can't find it :crying:

kingkongballs said:
I give up!
I couldn't get it to work, flashed CM10 and found it buggy, gone back to stock and still no updates.
I've tried to update the hboot by using the JBFWTOOL and nothing happens, tried doing it manually and it fails (failed <remote: 99 unknown fail>
There must be a way, but I can't find it :crying:
Click to expand...
Click to collapse
maybe:
- status 7 mean your TWRP or CWM not suitable with rom, need update newest version (happened to me, and after update CWM is ok.)
- make sure you phone unlocked bootloader already.
- your zip file is error during dowload, re-download.

dktblade said:
maybe:
- status 7 mean your TWRP or CWM not suitable with rom, need update newest version (happened to me, and after update CWM is ok.)
- make sure you phone unlocked bootloader already.
- your zip file is error during dowload, re-download.
Click to expand...
Click to collapse
I was under the impression that i needed to remove CWM...
bootloader is unlocked however if i try to open any of the zip files, they are corrupted, but it's the same wherever i download them from.
so should I put cwm back on and try updating again?

[Q&A] EXE/ZIP RUU M8_VZW 5.0.1 (s-off only)(newest)

Q&A for EXE/ZIP RUU M8_VZW 5.0.1 (s-off only)(newest)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for EXE/ZIP RUU M8_VZW 5.0.1 (s-off only)(newest). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

billblack said:
Long time lurker. I read and can use Google . Regardless, it failed and scared the crap out of me as it wouldn't boot. Got back into boot loader, fired up EXE again and it seems to have finished the 2nd time. A few more grey hairs, but all is good my friend. Thanks.
Click to expand...
Click to collapse
Same thing happened to me! Failed the first time around, worked the second. Booting now and it appears to be working (Android is upgrading...)

So when I use the ruu for sdcard and I reboot after I get send to recovery and can't boot system. Why is that?

EXE/ZIP RUU M8_VZW 5.0.1 Help
I installed the RUU zip via SD last night. I was running Dottat's EXE/ZIP RUU M8_VZW 4.4.4 (s-off only) with stock recovery. When I flashed the 5.0.1 RUU zip, I have a couple Partition Fails (unfortunately, I don't remember exactly which ones). However, in the time since I installed it, I saw all the new messages in the thread about others having the same Partition Fail errors. Even with the errors, my phone booted fine. I am having some weirdness though (major lag after sending a message in Facebook Messenger app....a reboot resolves the lag for a little while, then it returns; Verizon Caller ID app won't load; logging in to Swiftkey keyboard's cloud with my Google account fails with an error). So I see the new zip to flash the L Hboot BEFORE flashing the RUU. Obviously too late for that. Also, I installed TWRP recovery in place of the stock recovery.
So my question is: How should I proceed with trying to get the 5.0.1 to flash with no errors? Should I install Dottat's 4.4.4 (s-off), which will get me back to stock recovery...then let it boot up. Then flash the L hboot, and then finally flash the 5.0.1 RUU? Or are there other alternatives?
Thanks!

mbarcus said:
I installed the RUU zip via SD last night. I was running Dottat's EXE/ZIP RUU M8_VZW 4.4.4 (s-off only) with stock recovery. When I flashed the 5.0.1 RUU zip, I have a couple Partition Fails (unfortunately, I don't remember exactly which ones). However, in the time since I installed it, I saw all the new messages in the thread about others having the same Partition Fail errors. Even with the errors, my phone booted fine. I am having some weirdness though (major lag after sending a message in Facebook Messenger app....a reboot resolves the lag for a little while, then it returns; Verizon Caller ID app won't load; logging in to Swiftkey keyboard's cloud with my Google account fails with an error). So I see the new zip to flash the L Hboot BEFORE flashing the RUU. Obviously too late for that. Also, I installed TWRP recovery in place of the stock recovery.
So my question is: How should I proceed with trying to get the 5.0.1 to flash with no errors? Should I install Dottat's 4.4.4 (s-off), which will get me back to stock recovery...then let it boot up. Then flash the L hboot, and then finally flash the 5.0.1 RUU? Or are there other alternatives?
Thanks!
Click to expand...
Click to collapse
Run it once more. The failed PU was for the data partition. If you run it once more it will be successful. I think the root cause here is the changes to partitions that occurred with this OTA and that the likely solution is to flash the L hboot first before doing the RUU to L. Once on L firmware/OS you can use the RUU again with no issues.
One big dang speed bump in all the fun.

dottat said:
Run it once more. The failed PU was for the data partition. If you run it once more it will be successful. I think the root cause here is the changes to partitions that occurred with this OTA and that the likely solution is to flash the L hboot first before doing the RUU to L. Once on L firmware/OS you can use the RUU again with no issues.
One big dang speed bump in all the fun.
Click to expand...
Click to collapse
Can I run the RUU again using TWRP? Or do I need to be on Stock Recovery? And thank you for your help!!

mbarcus said:
Can I run the RUU again using TWRP? Or do I need to be on Stock Recovery? And thank you for your help!!
Click to expand...
Click to collapse
recovery doesnt' weigh in here. You can install it from bootloader using the SD card method.

How do I flash L Hboot? with twrp? do I have to flash it or can I just use the ruu to get to the new 5.0.1 firmware? thanks

So you asked to report our experience ...
First, let me say thanks. I am now on 5.0.1 and back to root thanks to your work and willingness to share.
Background:
I was stock 4.4.4, unlocked, s-off with TWRP recovery when the VZW 5.0.1 OTA hit. I had a number of bloatware apps frozen through Titanium Backup and probably due to a combination of all that I couldn't load the update. Reflashing boot, system and recovery still wouldn't let me take the OTA, so I ended up using HTC SyncManager repair to make Verizon happy. I got the update, kept unlocked and s-off, but lost root.​
Recovering Root:
After finding your stuff, I first tried loading through the bootloader with your zips in the root of my SD card (128 GB, single partition, exFAT). No go for either the hboot or the RUU. both gave me a "Wrong image" message and only allowed reboot to system.
So the next step was to try flashing with TWRP. I flashed TWRP 2.8.5.0 via fastboot and then let it do all it's stuff (Busybox, SuperSU, SD Card Fix, etc.) , rebooted to system just to have everything catch up to itself, and then rebooted to TWRP recovery. I then flashed the hboot and the RUU through TWRP, rebooted, and I'm back to full root.​
So again, thanks! A happy camper backing everything up with Titanium again and hoping that you really wanted to hear a real-world experience.

A_Levis said:
First, let me say thanks. I am now on 5.0.1 and back to root thanks to your work and willingness to share.
Background:
I was stock 4.4.4, unlocked, s-off with TWRP recovery when the VZW 5.0.1 OTA hit. I had a number of bloatware apps frozen through Titanium Backup and probably due to a combination of all that I couldn't load the update. Reflashing boot, system and recovery still wouldn't let me take the OTA, so I ended up using HTC SyncManager repair to make Verizon happy. I got the update, kept unlocked and s-off, but lost root.​
Recovering Root:
After finding your stuff, I first tried loading through the bootloader with your zips in the root of my SD card (128 GB, single partition, exFAT). No go for either the hboot or the RUU. both gave me a "Wrong image" message and only allowed reboot to system.
So the next step was to try flashing with TWRP. I flashed TWRP 2.8.5.0 via fastboot and then let it do all it's stuff (Busybox, SuperSU, SD Card Fix, etc.) , rebooted to system just to have everything catch up to itself, and then rebooted to TWRP recovery. I then flashed the hboot and the RUU through TWRP, rebooted, and I'm back to full root.​
So again, thanks! A happy camper backing everything up with Titanium again and hoping that you really wanted to hear a real-world experience.
Click to expand...
Click to collapse
There's just one problem with this all.... lol...
you can't flash the RUU or hboot zips through TWRP.

..

dottat said:
There's just one problem with this all.... lol...
you can't flash the RUU or hboot zips through TWRP.
Click to expand...
Click to collapse
Well, XDA does call me a "Junior Member". Probably a good reason for that.
Looking back at the TWRP log, it seems you are right and my attempts to flash hboot and RUU from TWRP failed (but any indication of that flashed by so fast that I couldn't tell). So does that mean that my fastboot flash of TWRP recovery opened up everything that I needed to get root directly from TWRP (installation of BusyBox and SuperSU)?

A_Levis said:
Well, XDA does call me a "Junior Member". Probably a good reason for that.
Looking back at the TWRP log, it seems you are right and my attempts to flash hboot and RUU from TWRP failed (but any indication of that flashed by so fast that I couldn't tell). So does that mean that my fastboot flash of TWRP recovery opened up everything that I needed to get root directly from TWRP (installation of BusyBox and SuperSU)?
Click to expand...
Click to collapse
Most recoveries will offer to flash su on an unrooted rom. You can either do that or manually flash the newest supersu.zip After you boot up you can install busybox from an app like this... https://play.google.com/store/apps/details?id=stericson.busybox
So what rom/firmware are you currently on?

After using the RUU, it finished with a successful update. I booted into recovery to create a backup, but now when I try to boot back into the OS, it goes back into TWRP like it would if I were booting into recovery. Anyone have any ideas?
---------- Post added at 10:30 PM ---------- Previous post was at 10:25 PM ----------
Nickchapstick said:
So when I use the ruu for sdcard and I reboot after I get send to recovery and can't boot system. Why is that?
Click to expand...
Click to collapse
After looking for a little bit, it appears I'm having a similar issue.

klw7890 said:
After using the RUU, it finished with a successful update. I booted into recovery to create a backup, but now when I try to boot back into the OS, it goes back into TWRP like it would if I were booting into recovery. Anyone have any ideas?
---------- Post added at 10:30 PM ---------- Previous post was at 10:25 PM ----------
After looking for a little bit, it appears I'm having a similar issue.
Click to expand...
Click to collapse
You were able to boot up the OS successfully the first time right?

dottat said:
You were able to boot up the OS successfully the first time right?
Click to expand...
Click to collapse
Yes. It booted to OS the first time, after the RUU completed, but now it just boots back into recovery.

klw7890 said:
Yes. It booted to OS the first time, after the RUU completed, but now it just boots back into recovery.
Click to expand...
Click to collapse
Stock recovery?

dottat said:
Stock recovery?
Click to expand...
Click to collapse
Initially, yes. I flashed the latest TWRP. I think I might have flashed the wrong version. I'm rerunning the RUU. I really appreciate the help.
If it was the right version by chance, do you have any idea what could've caused that?

klw7890 said:
Initially, yes. I flashed the latest TWRP. I think I might have flashed the wrong version. I'm rerunning the RUU. I really appreciate the help.
If it was the right version by chance, do you have any idea what could've caused that?
Click to expand...
Click to collapse
Did you use flashify? Reason I ask is that app still thinks it's a Sprint phone. Use the twrp I have posted in the op.

dottat said:
Did you use flashify? Reason I ask is that app still thinks it's a Sprint phone. Use the twrp I have posted in the op.
Click to expand...
Click to collapse
"That app" being TWRP Manager?

After Custom Recovery OTA and Recovery-flashable Incrementals Don't work

I've had the OPO for over a year, and just now had the need to root it. An OTA happened to come in the next day, and the update process didn't work as I expected. So I'd like to know if I did something wrong, a random problem occurred, or this is the way it's supposed to work.
Until a couple days ago, the OPO was stock + all OTAs that had been released. I unlocked the bootloader, installed TWRP recovery, and installed SuperSU. All that went as expected. When the OTA notification arrived the next day, I tried to install it with "Update Cyanogen recovery" still unchecked (because original reports with CM 11S said you could keep your custom recovery with an OTA).
When I tried to install the update, the phone just rebooted to TWRP and the update was not stored anywhere on /sdcard. I then checked "Update Cyanogen recovery" and tried to install the OTA again. It did not install, and TWRP was still my recovery. Several repeats of this had no different result.
Then I flashed the stock CM recovery with fastboot. After verifying I had the CM recovery, I installed the OTA again, and it failed again, reboting to recovery and doing nothing else. Then I downloaded the incremental update and tried to flash that via CM recovery, and that failed too. I checked the file /System/build.opt, and line "ro.build.version.incremental" said 49d90510ef, which meant I should have been able to install the cm-bacon-49d90510ef-to-d91bf047f5-signed.zip file. But it failed and said the current build number was not as expected. The number it gave me was not anything that made sense looking at the list of recent incremental updates.
So at that point I bailed out and installed via recovery the full flashable zip file, and that worked.
If this is what I have to do each time, it's certainly doable, but I don't think this is how it's supposed to go. I'm surprised the OTA didn't work with the custom recovery installed, and I'm even more surprised that the incremental installation failed. Maybe trying to install the OTA without updating the CM recovery messed things up, but that doesn't seem likely either. When the next OTA comes out, I'll see if any of these troubles are repeated. But I'd like to know how the OTA was supposed to work after installing a custom recovery.

I am still yet to figure this one out also, my friend I'm sure with time someone will respond who had better experience with this; just be patient
Have you been able to root yet? I can't seem to be able to on the new incremental yet.
@MidnightJava

Looks like I'm not the only one with this problem.
I'm trying to find now the link for Cyanogen Recovery flashable to see it that fix the OTAs

Check the CyanogenMod website, @distante

vince.lupe said:
Have you been able to root yet? I can't seem to be able to on the new incremental yet.
@MidnightJava
Click to expand...
Click to collapse
After installing the latest CM 12.1 ROM, I had to re-flash SuperSU. After doing that, root access is working fine. If you're having trouble rooting after installing the incremental, then my experience is perhaps not applIcable—since I was not able to do an incremental installation and had to re-flash the entire ROM.

distante said:
Looks like I'm not the only one with this problem.
I'm trying to find now the link for Cyanogen Recovery flashable to see it that fix the OTAs
Click to expand...
Click to collapse
This thread with Cyanogen mirrors and info has exactly what you need.

MidnightJava said:
After installing the latest CM 12.1 ROM, I had to re-flash SuperSU. After doing that, root access is working fine. If you're having trouble rooting after installing the incremental, then my experience is perhaps not applIcable—since I was not able to do an incremental installation and had to re-flash the entire ROM.
Click to expand...
Click to collapse
I had to completely re-flash stock 3JL full also, but this time root doesn't work. Tried to use WugFresh's Bacon Root Toolkit - didn't work - then, I tried to flash SuperSu via TWRP recovery (after unlocking bootloader), and that didn't work either? In other words, I have bootloader unlock, custom recovery installed, but no root :/

vince.lupe said:
I had to completely re-flash stock 3JL full also, but this time root doesn't work. Tried to use WugFresh's Bacon Root Toolkit - didn't work - then, I tried to flash SuperSu via TWRP recovery (after unlocking bootloader), and that didn't work either? In other words, I have bootloader unlock, custom recovery installed, but no root :/
Click to expand...
Click to collapse
What happens when you try to root? Does it seem successful, but then you don't actually have root access? Or do you get some failure indication when you flash SuperSU? I've rooted a few phones in the last few years, but I'm far from an expert. Hopefully someone else will jump in with some idea of what went wrong. Shooting somewhat in the dark, I'd say look at the version of SuperSU and make sure it's the latest and the right one for the ROM, look at read-write permissions on your storage (if you can, you may need root access to check it properly). Of course wiping cache is always a good step, and if nothing else works, maybe factory reset, re-lock the bootloader, and then unlock and flash custom recovery again, and see if root can be successful then.

Once on custom recovery ( TWRP ) OTAs will NOT not install, unless you revert back to CM stock recovery. If you don't want to do that, wait for a signed flashable version to come out, which is normally 1-2 days after. Everytime you flash an update you will have to reinstall TWRP and SuperSU.
---------- Post added at 03:31 PM ---------- Previous post was at 03:25 PM ----------
vince.lupe said:
I had to completely re-flash stock 3JL full also, but this time root doesn't work. Tried to use WugFresh's Bacon Root Toolkit - didn't work - then, I tried to flash SuperSu via TWRP recovery (after unlocking bootloader), and that didn't work either? In other words, I have bootloader unlock, custom recovery installed, but no root :/
Click to expand...
Click to collapse
Did you guys remove the " Update Cyanogen recovery" in Dev options and "respect CM root settings " In SuperSU settings ?

Cholerabob said:
Once on custom recovery ( TWRP ) OTAs will NOT not install, unless you revert back to CM stock recovery. If you don't want to do that, wait for a signed flashable version to come out, which is normally 1-2 days after. Everytime you flash an update you will have to reinstall TWRP and SuperSU.
Click to expand...
Click to collapse
I figured that was the case when it failed. What seems anomalous in my case is that even after reverting to the stock recovery and verifying that it was installed, OTAs would not succeed. I didn't know about the "respect CM root settings " In SuperSU settings that you mentioned. Maybe that was the problem? Either that or the fact that I tried to install the OTA first with the custom recovery. Certainly the fact that the incremental installation reported I was at a different build number than what was listed in /System/build.opts indicates something was out of whack on my phone.
Temporarily reverting to the stock recovery and installing the OTA, then going back to custom recovery, seems a bit simpler than flashing the signed zip file and then re-installing recovery and SuperSU, but either way is not too bad. But being an engineer, I always have to find the optimum path and understand why things don't work the way I thought they should.

MidnightJava said:
What happens when you try to root? Does it seem successful, but then you don't actually have root access? Or do you get some failure indication when you flash SuperSU? I've rooted a few phones in the last few years, but I'm far from an expert. Hopefully someone else will jump in with some idea of what went wrong. Shooting somewhat in the dark, I'd say look at the version of SuperSU and make sure it's the latest and the right one for the ROM, look at read-write permissions on your storage (if you can, you may need root access to check it properly). Of course wiping cache is always a good step, and if nothing else works, maybe factory reset, re-lock the bootloader, and then unlock and flash custom recovery again, and see if root can be successful then.
Click to expand...
Click to collapse
It just tells me that I don't have access :/ Everything flashes perfectly fine, but then when I boot up and try to access root, it tells me that I don't have access. I've tried everything already :/
---------- Post added at 06:51 PM ---------- Previous post was at 06:47 PM ----------
Cholerabob said:
Did you guys remove the " Update Cyanogen recovery" in Dev options and "respect CM root settings " In SuperSU settings ?
Click to expand...
Click to collapse
I did do both :/

MidnightJava said:
I figured that was the case when it failed. What seems anomalous in my case is that even after reverting to the stock recovery and verifying that it was installed, OTAs would not succeed. I didn't know about the "respect CM root settings " In SuperSU settings that you mentioned. Maybe that was the problem? Either that or the fact that I tried to install the OTA first with the custom recovery. Certainly the fact that the incremental installation reported I was at a different build number than what was listed in /System/build.opts indicates something was out of whack on my phone.
Temporarily reverting to the stock recovery and installing the OTA, then going back to custom recovery, seems a bit simpler than flashing the signed zip file and then re-installing recovery and SuperSU, but either way is not too bad. But being an engineer, I always have to find the optimum path and understand why things don't work the way I thought they should.
Click to expand...
Click to collapse
Not really since the signed zip file come with superSU, after the install it will ask you if you want to install superSU automatically, and TWRP will too when you start your TWRP app on your phone after reboot. But to each his own
---------- Post added at 08:22 PM ---------- Previous post was at 08:19 PM ----------
vince.lupe said:
It just tells me that I don't have access :/ Everything flashes perfectly fine, but then when I boot up and try to access root, it tells me that I don't have access. I've tried everything already :/
---------- Post added at 06:51 PM ---------- Previous post was at 06:47 PM ----------
I did do both :/
Click to expand...
Click to collapse
Is your bootloader unlocked ? Reinstalled superSU ? Did you check with the fastboot command ? If you don't know how, look at Heisenberg's guide.

Cholerabob said:
Not really since the signed zip file come with superSU, after the install it will ask you if you want to install superSU automatically, and TWRP will too when you start your TWRP app on your phone after reboot. But to each his own
---------- Post added at 08:22 PM ---------- Previous post was at 08:19 PM ----------
Is your bootloader unlocked ? Reinstalled superSU ? Did you check with the fastboot command ? If you don't know how, look at Heisenberg's guide.
Click to expand...
Click to collapse
Yes, bootloader is unlocked and SuperSu was reinstalled :/

[HELP] HTC on e8sd MM update install ERROR

hey guys, yesterdy I got a notification for android 6.0 upgrade and it was a ~100mb file for preparation so i downloaded it and charged my battery and tapped to install it, it reboots and wants to start installing but then goes to recovery menu and gives an error
the phone is all stock, no root or bl unlock or anything
I attached the error msg below:
it's m8sd not e8sd, mistyped in topic

Might be due to bad zip file! Download the update again and try!

Kianush said:
hey guys, yesterdy I got a notification for android 6.0 upgrade and it was a ~100mb file for preparation so i downloaded it and charged my battery and tapped to install it, it reboots and wants to start installing but then goes to recovery menu and gives an error
the phone is all stock, no root or bl unlock or anything
I attached the error msg below:
it's m8sd not e8sd, mistyped in topic
Click to expand...
Click to collapse
I had a similar error as yours doing exactly the same thing but mine was a e8sw running LP5 Sense6 rooted stock with xposed.
Even when I uninstalled xposed and disabled supersu, I still could not install the upgrade.
Finally managed to get the upgrade by going all the way back to stock and allow the OTA updates all the way up the MM6 update. Took me nearly 2 days to do that.
I have taken clean twrp backups of all the stock updates and will try and post them here soon.

generalugh28 said:
I had a similar error as yours doing exactly the same thing but mine was a e8sw running LP5 Sense6 rooted stock with xposed.
Even when I uninstalled xposed and disabled supersu, I still could not install the upgrade.
Finally managed to get the upgrade by going all the way back to stock and allow the OTA updates all the way up the MM6 update. Took me nearly 2 days to do that.
I have taken clean twrp backups of all the stock updates and will try and post them here soon.
Click to expand...
Click to collapse
thank you for the information, but as I mentioned in op my phone is already all stock, I havent ever moded or rooted or anything, it's stock locked bootloader

Have the exact same issue. My device is compelitely stock. Tried flashing the recovery from the downloaded OTA but still got the sama error. Hopefully someone will be able to resolve the issue.

if you have problems in installing OTA updates, follow these steps
1. check if your CID and MID are matching each other. they should be both for same region. mine are for vietnam. mec_dugl / HTC__057
2.Flash an stock RUU from http://forum.xda-developers.com/one-e8/help/htc-one-e8-mid-cid-ruu-ota-twrp-t2903210
3.Skip all registeration process and directly go to update menu.
4.this is a 3 stage update process: a small update for some applications/another 100 MB update for making device ready for main update!! / at last 1 GB main update . each one should be downloaded and installed separately.
5. after downloading 100MB update, DO NOT restart. coneect your phone to PC and go to download folder on phone internal memory, there should be a zip file containing updates(sadly I forgot file name), copy it on your PC and extract recovery.img from it.
6. boot your phone into bootloader and flash stock recovery you've extracted using fastboot.
7. now you have complete stock ROM. go to setting/update again and follow update process.
8.after updating you may flash twrp and supersu.
9. I don't know why, but there is a good chance that after messing with system files in MM you get stuck in several kinds of bootloops and soft-breaks. Don't worry; all you should do is going to recovery and wiping caches. sometimes you need a factory reset too. also have in mind that a complete boot after changing system files may take up to 15 minutes even without wipes.

@sam5154 well thank you for the info, Im gonna try these steps except, I will try to download again and flash recovery and try it before flashing a RUU and lose everything
but I hope it works anyway, btw mine is also vietnam region.

sam5154 said:
if you have problems in installing OTA updates, follow these steps
1. check if your CID and MID are matching each other. they should be both for same region. mine are for vietnam. mec_dugl / HTC__057
2.Flash an stock RUU from http://forum.xda-developers.com/one-e8/help/htc-one-e8-mid-cid-ruu-ota-twrp-t2903210
3.Skip all registeration process and directly go to update menu.
4.this is a 3 stage update process: a small update for some applications/another 100 MB update for making device ready for main update!! / at last 1 GB main update . each one should be downloaded and installed separately.
5. after downloading 100MB update, DO NOT restart. coneect your phone to PC and go to download folder on phone internal memory, there should be a zip file containing updates(sadly I forgot file name), copy it on your PC and extract recovery.img from it.
6. boot your phone into bootloader and flash stock recovery you've extracted using fastboot.
7. now you have complete stock ROM. go to setting/update again and follow update process.
8.after updating you may flash twrp and supersu.
9. I don't know why, but there is a good chance that after messing with system files in MM you get stuck in several kinds of bootloops and soft-breaks. Don't worry; all you should do is going to recovery and wiping caches. sometimes you need a factory reset too. also have in mind that a complete boot after changing system files may take up to 15 minutes even without wipes.
Click to expand...
Click to collapse
Hi, thanks for this. I will try this once i got home.
But i have one questions, mine is Vietnam MEC_DUGL with stock lollipop 5.0.2. The RUU only available for stock lollipop 5.0.1. Can I use this RUU or should I look for specific RUU for lollipop 5.02?
Thanks!

Kianush said:
@sam5154 well thank you for the info, Im gonna try these steps except, I will try to download again and flash recovery and try it before flashing a RUU and lose everything
but I hope it works anyway, btw mine is also vietnam region.
Click to expand...
Click to collapse
If you gonaa try that, then remeber to unroot and uninstall xposed, and you can use titanium backup for restoring your apps and data of course.

sam5154 said:
If you gonaa try that, then remeber to unroot and uninstall xposed, and you can use titanium backup for restoring your apps and data of course.
Click to expand...
Click to collapse
in op I already told that I dont have root or anything and the phone is all stock and it was like this from the begining, that means no xposed or anything else

Kianush said:
in op I already told that I dont have root or anything and the phone is all stock and it was like this from the begining, that means no xposed or anything else
Click to expand...
Click to collapse
Have you tried the suggestion above? Let me know the result! Thanks man

sam5154 said:
If you gonaa try that, then remeber to unroot and uninstall xposed, and you can use titanium backup for restoring your apps and data of course.
Click to expand...
Click to collapse
and how to check for this mec_dugl / HTC__057?
the first part is ok it shows that in booloader menu, but how to check for HTC__057??

Kianush said:
in op I already told that I dont have root or anything and the phone is all stock and it was like this from the begining, that means no xposed or anything else
Click to expand...
Click to collapse
Kianush said:
and how to check for this mec_dugl / HTC__057?
the first part is ok it shows that in booloader menu, but how to check for HTC__057??
Click to expand...
Click to collapse
Here you go :
If you want more information, use ADB (if you don't how to get it going, use the search on the forum or Google about it).
While you phone is connected to your PC, type adb reboot bootloader and wait for your phone to reboot into bootloader mode. Once there, you can perform fastboot commands like getvar. Type fastboot getvar all and you will see all the information about the phone, including the product variable which lists the model you have.
Source : http://forums.androidcentral.com/htc-one-m7/320871-how-check-htc-one-variant-model.html

bataskhayal said:
Here you go :
If you want more information, use ADB (if you don't how to get it going, use the search on the forum or Google about it).
While you phone is connected to your PC, type adb reboot bootloader and wait for your phone to reboot into bootloader mode. Once there, you can perform fastboot commands like getvar. Type fastboot getvar all and you will see all the information about the phone, including the product variable which lists the model you have.
Source : http://forums.androidcentral.com/htc-one-m7/320871-how-check-htc-one-variant-model.html
Click to expand...
Click to collapse
Thank you for the info
btw I did go through the steps of downloading the 110mb update and flashing its recovery before pressing install and that didnt work and still gives OP error
so I guess I have to use RUU but not gonna do that for a while and also Im not so sure it'll work because the phone is already factory stock!

Kianush said:
Thank you for the info
btw I did go through the steps of downloading the 110mb update and flashing its recovery before pressing install and that didnt work and still gives OP error
so I guess I have to use RUU but not gonna do that for a while and also Im not so sure it'll work because the phone is already factory stock!
Click to expand...
Click to collapse
Yes bos, i also did the recovery trick but still cant make it work. So the only solution we havent try is to flash RUU which i doubt also will make it work since my phone also factory stock. So i guess will stay in 5.0.2 for a while.

Kianush said:
Thank you for the info
btw I did go through the steps of downloading the 110mb update and flashing its recovery before pressing install and that didnt work and still gives OP error
so I guess I have to use RUU but not gonna do that for a while and also Im not so sure it'll work because the phone is already factory stock!
Click to expand...
Click to collapse
Hi, I have managed to finally update my Vietnam HTC One E8 dual SIM (MEC_DUGL) to Android 6.0. The problem that cause the error is the error recovery file, hence I re-install the RUU to get the correct recovery.img file. Below are the steps :
Note : Try with your own risk
1. My device is currently stock 5.0.2 no root and locked. Before starting the update process please make sure to backup all of your important data. Im using the stock HTC backup software, when you restore your device after you finished your update process, it will re-install your currently installed apps , contacts, settings, etc.
2. Download RUU for your device here : http://forum.xda-developers.com/one-e8/help/htc-one-e8-mid-cid-ruu-ota-twrp-t2903210
I downloaded :
[Vietnam][DUAL][M8sd][mec_dugl][CID HTC__059][OPAJ20000] :
[Lollipop 5.0.1][2.35.425.2] : LINK
Seems not match with my current software (5.0.2), but eventually it will do the magic.
3. Flash RUU. NOTE : You will lose all of your data in your internal phone memory. Make sure to backup all of your important files.
Steps:
1) Download RUU.
2) Rename RUU to 0PAJIMG.zip (the first character is a zero, NOT A LETTER O)
3) Put renamed 0PAJIMG.zip on your external_SD
4) Boot into your bootloader and make sure your in hboot and let it update its RUU.
5) No PC, no adb, no fastboot, no terminal is needed, just a root explorer to rename and transfer the renamed RUU file to external_sd
6) After you have updated your RUU, make sure to remove the 0PAJIMG.zip from your external_sd because it will ask to update your RUU everytime your reboot to your bootloader which it is technically supposed to do but its unnecessary after you have done it once (unless you are planning on flashing RUU again).
7) Done!
Source : http://forum.xda-developers.com/one-e8/help/htc-one-e8-mid-cid-ruu-ota-twrp-t2903210
4. Reboot your phone, now your phone is back to factory stock, connect it to wifi, no need to set up any account, just go directly to software update from Settings > About > Software Updates. Just install all the available software updates (5.0.2 > 6.0 part 1 > 6.0 part 2).
5. BOOM! Your HTC One E8 now runs Android 6.0.1 Marshmallow.
6. Restore your phone from the stock HTC Backup Software.
7. Done

Problem with reverting back to stock and take OTA!

Hi
I really need help to go stock on my device.
I unlocked my bootloader, flashed TWRP and Magisk on stock rom and installed the ViperU Magisk Module.
I also made a NANDROID of the stock ROM before, unfortunately there is no Recovery in it, since i had TWRP already installed.
Then an OTA (oktober 17 security patch) was available for my device and i startet the install process, but it didn't install.
TWRP open recovery would run not even 1 second then exit.
In order to get the OTA I restored stock recovery (which i had to extract from OTA, since i forgot to back it up) and started OTA.
--> Red Triangle!
Even after restoring stock NANDroid the OTA wouldn't install.
My mistake i think was that i didn't kept the stock system read only when i did the backup in twrp and swiped to allow modifications.
According to some threads here, even mounting the system r/w would break OTA functionality.
So since i also have no RUU for my device, i don't have the chance either to go back to stock. Maybe you did that mistake too.
The only way i can think of now, is to go temporary S-OFF, change CID and MID (to 401 international for example), flash Firmware and run the RUU for it.
But i'm not sure it'll still work after flashing the firmware.
Can anyone maybe confirm this way would work?
And is there an other way available?
Thanks!
Quick Specs:
-Unlocked Bootloader
-S-ON
-Firmware: 1.27.166.7
-CID: VODAP110
-MID: 2PZC10000

Nightmare
Quick Specs:
-Unlocked Bootloader
-S-ON
-Firmware: 1.27.166.7
-CID: VODAP110
-MID: 2PZC10000[/QUOTE said:
Hello, Have you looked at this list to see if you could take one from here?
https://docs.google.com/spreadsheets/d/15JL3tRWDSVOUKo_revEYtQ_tRcOSJ0vWcvk8a7TK8Hk/edit#gid=0
Click to expand...
Click to collapse

michaelbsheldon said:
Hello, Have you looked at this list to see if you could take one from here?
https://docs.google.com/spreadsheets/d/15JL3tRWDSVOUKo_revEYtQ_tRcOSJ0vWcvk8a7TK8Hk/edit#gid=0
Click to expand...
Click to collapse
Hi
Yes, unfortunately there's nothing available for my device.

Does the phone boot into os?

You cannot take an OTA with TWRP. You need an untouched system image to take the OTA. Easiest way is to RUU to your current firmware. Let the system update.

schmeggy929 said:
You cannot take an OTA with TWRP. You need an untouched system image to take the OTA. Easiest way is to RUU to your current firmware. Let the system update.
Click to expand...
Click to collapse
Actually that's not true, TWRP appareantly has a open recovery which works with OTA.
Also the RUU doesn't have to match your Firmware.
What i did was following:
-Had TWRP and a running ROM, rootet with magisk
-Downloded a RUU for my MID (picked the 401 one for international unlocked, i think you can take any)
-Installed sunshine and went temp s-off
-Went into download mode and changed cid to a matching one (HTC__034 -> Europe for me, there are other compatibles)
-Renamed the RUU (2PZCIMG.zip) and put it in the root of my SD-Card
-Inserted the SD-Card and rebootet to download (there's an option in download mode for that)
-pressed volume up to start installation
-Done, phone reboots with stock system, stock recovery and right firmware
Also I installed TWRP right back and magisk and tried to take the OTA. It installed without problems through TWRP.
Afaik, it will work, but replace TWRP in the end, so you will have to reflash twrp after every OTA, or you just take the recovery out of the
OTA and flash it through SD-Card (you have to rename it).
So that's the way to go if you have to go stock and there's nothing in the collection for your version.
Hope this helps.
Edit: Please remember to keep TWRP in read only! you will still be able to flash zips like magisk for example.

Hey,
after you had flashed the 004 Ruu, did you change S-off back to S-On?

2eli0 said:
Hey,
after you had flashed the 004 Ruu, did you change S-off back to S-On?
Click to expand...
Click to collapse
since s-off is still temporary it will go back to s-on as soon as you boot into recovery or rom.
also, i flashed the 1.27.401.5 ruu, since i wanted to see if the update to 1.27.401.12 ota works with twrp and magisk installed.
it does, just remember to keep recovery read only!

What do you mean by "read only"? Is there a setting where I can do that?

2eli0 said:
What do you mean by "read only"? Is there a setting where I can do that?
Click to expand...
Click to collapse
If you take a bone stock phone (when you buy it for example, or after running a ruu), the first time you flash twrp and
boot into it, it will ask you if you want to keep the system in read only, in order not to break the OTA functionality.
But you won't be able to restore backups or install zip which changes system partition (Custom ROMs, xposed, etc.).
If you want to keep OTA functionality, you can keep it read only and still be able to flash zips like magisk and so on.
Once you swipe to allow modifications doe, there is no way back, so keep that in mind!
Mounting the system partition once in rw (read/write) will break OTA permanently.
If you ever decide that you want to modify the system partition anyway (going custom ROM) you can change the setting:
TWRP-->Mount-->"Mount system partition read only"-->uncheck it
Correct me if i'm wrong.

Nightmare[ITA said:
;75529278]If you take a bone stock phone (when you buy it for example, or after running a ruu), the first time you flash twrp and
boot into it, it will ask you if you want to keep the system in read only, in order not to break the OTA functionality.
But you won't be able to restore backups or install zip which changes system partition (Custom ROMs, xposed, etc.).
If you want to keep OTA functionality, you can keep it read only and still be able to flash zips like magisk and so on.
Once you swipe to allow modifications doe, there is no way back, so keep that in mind!
Mounting the system partition once in rw (read/write) will break OTA permanently.
If you ever decide that you want to modify the system partition anyway (going custom ROM) you can change the setting:
TWRP-->Mount-->"Mount system partition read only"-->uncheck it
Correct me if i'm wrong.
Click to expand...
Click to collapse
Ah ok, got it.
I would want to keep the OTA functionality, since I want to keep it stock with root privileges. That's all.
I won't try custom roms anytime soon. Thanks for the tip.
If I had known that before I flashed twrp I would have been able to update OTA now, right?

2eli0 said:
Ah ok, got it.
I would want to keep the OTA functionality, since I want to keep it stock with root privileges. That's all.
I won't try custom roms anytime soon. Thanks for the tip.
If I had known that before I flashed twrp I would have been able to update OTA now, right?
Click to expand...
Click to collapse
Pretty much, ya. I missed that part the first time too

Nightmare[ITA said:
;75529808]Pretty much, ya. I missed that part the first time too
Click to expand...
Click to collapse
Ahh, dang it. Well, I'd say we learn by mistakes.
Thanks for the hint.
I will try the version you tried. It's still downloading.
Btw. did the download take like ages for you?
During the day I get like 100-200 KB/s and sometimes even less. In the evening like 11 pm it's 3 MB/s...
My connection is fine.

2eli0 said:
Ahh, dang it. Well, I'd say we learn by mistakes.
Thanks for the hint.
I will try the version you tried. It's still downloading.
Btw. did the download take like ages for you?
During the day I get like 100-200 KB/s and sometimes even less. In the evening like 11 pm it's 3 MB/s...
My connection is fine.
Click to expand...
Click to collapse
Yes, over the last few months AFH has been extremely slow.

Ok I will state it in another way. The easiest way to take the OTA is on an Untouched System and Recovery Image lol. You can with TWRP however the firmware will not flash. Hence probably your problem. You do know there is an RUU for 2.33.166.6 for your carrier. https://www.htcdev.com/devcenter/downloads

I have already seen that, but its like 400 mb big, if I remember correctly, hence not the entire files, right?

schmeggy929 said:
Ok I will state it in another way. The easiest way to take the OTA is on an Untouched System and Recovery Image lol. You can with TWRP however the firmware will not flash. Hence probably your problem. You do know there is an RUU for 2.33.166.6 for your carrier. https://www.htcdev.com/devcenter/downloads
Click to expand...
Click to collapse
lol. That's the site i was searching for.
But since it's the source code, you would have to compile it first, right?
Anyway, are you sure? Cause from what i can see the firmware got updated too.
In fact, in this post under point 4. it states, that it's working.

The htcdev stuff is source only. No good. Also, once you flash twrp you can't take ota. You must be stock to take ota (s-off and bootloader remain untouched and do not matter for flashing, there is no need to s-on nor relock the bootloader ever).
To achieve stock just flash the same firmware you currently use as a zip from the external sdcard. The only things lost is root and twrp.

Nightmare[ITA] said:
lol. That's the site i was searching for.
But since it's the source code, you would have to compile it first, right?
Anyway, are you sure? Cause from what i can see the firmware got updated too.
In fact, in this post under point 4. it states, that it's working.
Click to expand...
Click to collapse
Yeah i guess you are right it is the source code. Even with TWRP stills seems like a lot of work to update. Ya'll need some custom ROMs installed. Flash signed firmware.zip, reflash TWRP and flash updated ROM. All done. If by chance you ever needed to return to stock, flash your system image backup. Ya'll make things so complicated when they really aren't. lol

Nightmare[ITA said:
]Actually that's not true, TWRP appareantly has a open recovery which works with OTA.
Also the RUU doesn't have to match your Firmware.
What i did was following:
-Had TWRP and a running ROM, rootet with magisk
-Downloded a RUU for my MID (picked the 401 one for international unlocked, i think you can take any)
-Installed sunshine and went temp s-off
-Went into download mode and changed cid to a matching one (HTC__034 -> Europe for me, there are other compatibles)
-Renamed the RUU (2PZCIMG.zip) and put it in the root of my SD-Card
-Inserted the SD-Card and rebootet to download (there's an option in download mode for that)
-pressed volume up to start installation
-Done, phone reboots with stock system, stock recovery and right firmware
Also I installed TWRP right back and magisk and tried to take the OTA. It installed without problems through TWRP.
Afaik, it will work, but replace TWRP in the end, so you will have to reflash twrp after every OTA, or you just take the recovery out of the
OTA and flash it through SD-Card (you have to rename it).
So that's the way to go if you have to go stock and there's nothing in the collection for your version.
Hope this helps.
Edit: Please remember to keep TWRP in read only! you will still be able to flash zips like magisk for example.
Click to expand...
Click to collapse
Well, I managed to do it exactly the way you did.
Everything worked just fine. I changed the CID to HTC__034 and flashed the ruu file updated to Oreo and flashed TWRP kept it at read only and rooted the phone.
Thanks for that :good: