I want to use Darthstalker Rom on my gs3 verizon using pageplus. I was told to ask this question. Find out if there is a manual program method included in the rom so that a number can be manually programmed into the phone also if the SPC code is defaulted to Six zeros. Is a PRL able to be flashed to the phone VIA CDMA WORKSHOP. Can you disable 4g LTE completely and change to NV ONLY for 3G/ 1X speeds.
Related
I want to flash the Pantech Breakout to work on PagePlus. I have rooted it with CWM recovery and read this thread for instructions to flash the Thunderbolt
http://forum.xda-developers.com/showthread.php?t=1294179
So far, I have,
-Verizon Pantech Breakout, clean, no issues
-New unactivated Verizon LTE sim card (if necessary)
-CDMA Workshop 3.9.0 demo
The questions I have are,
1. How to enter Diag mode in the Breakout?
2. To activate a new phone on PagePlus, it requires an ESN or MEID number. How can I get it before I place the activation? Can CDMA workshop identify the MEID number?
3. To acquire 3G data, I read somewhere that it might work if I obtain the MIN # from PagePlus after activation and use CDMA to write it. Is this correct?
4. Will there be a problem if the MEID # starts with 99000?
Any other roadblocks to consider?
Thanks for any help.
Rooted, but need to flash to PP
Can anyone help?
Ok ok... I would help but mimited data so let me hit up my man jason here. Not sure what he'll charge you
Sent from an Apple killing JellyBean
ota looping with sim card
I need help too. The sim card won't provision and keeps the 3G from working. I can see the signal in the signal meter menu but I cannot get the phone to think it's provisioned. That's where I'm stuck. HELP!!!:crying:
Gtalk me @ [email protected]
Sent from an Apple killing JellyBean
3G data needs
moparfreak426 said:
Ok ok... I would help but mimited data so let me hit up my man jason here. Not sure what he'll charge you
Sent from an Apple killing JellyBean
Click to expand...
Click to collapse
Ok, I used CDMA Flasher to flash to Page Plus 3 months ago. Verizon just issued an OTA update and I need to flash Page Plus again (I have also blocked future OTA updates). My problem is that I only had 1g data. I want to reflash with 3G data. CDMA Flasher support says they are working on 3G data for Page Plus, but it's not ready yet. Will it ever be ready? I don't know. How to flash Pantech Breakout to Page Plus (originally Verizon) with 3G data?
I have a Samsung Galaxy S3 SCH-I535 CDMA Verizon & GSM phone. Originally it was on android 4.1.2 and working fine for both CDMA and GSM (one at a time). CDMA EVDO Rev A data service was working fine.
I am using this phone in Nepal (not in USA). It was carrier unlocked for both CDMA & GSM when I purchased from Amazon. (so, I guess, Originally it may had some customized firmware/ROM for International use, I don’t have much idea).
I was asked for firmware upgrade every time when I run Samsung Kies. One day I clicked to upgrade the firmware. The upgrade was over successfully. But the new android version I found on my phone was 4.4.2.
In this version /new upgrade, I was unable to use CDMA data (EVDO-rev A). So I wanted to reverse back to old version. I search the process in Google and tried to load firmware with the help of Odin3 using this file:- “I535VRBMF1_I535VZWBMF1_VZW.zip”, but it was not successful. Result: Fail(Auth)
Then I loaded firmware for 4.4.2 using Odin3.09 (AP: “I535VRUDNE1_I535VZWDNE1_I535VRUDNE1_HOME.tar.md5”) and now the phone is working.
• If I use GSM SIM I can make call and use HSPA data service as well by adding new APN.
• If I use CDMA RUIM I can make call, BUT DATA SEVRICE using CDMA EVDO Rev A is NOT WORKING!! (I can not save APN in this case).
Now my issue is how to make CDMA EVDO data service working in my phone, because my basic requirement is to use this phone for CDMA service (voice + data).
I can edit the APN but when I click “Save”, nothing was saved. So I can not select APN for my carrier. I tried using APN Manager Pro too, here I can enter & enable the APN, but did not work. The phone is not able to dial the data access code #777 (verified from CDMA service provider side trace).
Can someone help me what I should do to make my phone working for CDMA data. My phone is rooted.
I guess it may work for CDMA data if I downgrade it to 4.3 or 4.1.2,
Can I do that. If so what are the procedures / steps. Any help in this regard would be highly appreciable.
My data worked this way
kkafle said:
I have a Samsung Galaxy S3 SCH-I535 CDMA Verizon & GSM phone. Originally it was on android 4.1.2 and working fine for both CDMA and GSM (one at a time). CDMA EVDO Rev A data service was working fine.
I am using this phone in Nepal (not in USA). It was carrier unlocked for both CDMA & GSM when I purchased from Amazon. (so, I guess, Originally it may had some customized firmware/ROM for International use, I don’t have much idea).
I was asked for firmware upgrade every time when I run Samsung Kies. One day I clicked to upgrade the firmware. The upgrade was over successfully. But the new android version I found on my phone was 4.4.2.
In this version /new upgrade, I was unable to use CDMA data (EVDO-rev A). So I wanted to reverse back to old version. I search the process in Google and tried to load firmware with the help of Odin3 using this file:- “I535VRBMF1_I535VZWBMF1_VZW.zip”, but it was not successful. Result: Fail(Auth)
Then I loaded firmware for 4.4.2 using Odin3.09 (AP: “I535VRUDNE1_I535VZWDNE1_I535VRUDNE1_HOME.tar.md5”) and now the phone is working.
• If I use GSM SIM I can make call and use HSPA data service as well by adding new APN.
• If I use CDMA RUIM I can make call, BUT DATA SEVRICE using CDMA EVDO Rev A is NOT WORKING!! (I can not save APN in this case).
Now my issue is how to make CDMA EVDO data service working in my phone, because my basic requirement is to use this phone for CDMA service (voice + data).
I can edit the APN but when I click “Save”, nothing was saved. So I can not select APN for my carrier. I tried using APN Manager Pro too, here I can enter & enable the APN, but did not work. The phone is not able to dial the data access code #777 (verified from CDMA service provider side trace).
Can someone help me what I should do to make my phone working for CDMA data. My phone is rooted.
I guess it may work for CDMA data if I downgrade it to 4.3 or 4.1.2,
Can I do that. If so what are the procedures / steps. Any help in this regard would be highly appreciable.
Click to expand...
Click to collapse
I think your problem is the region is not set Nepal...I installed dark jb rom in my phone and data was gone since then. Then I manually downloaded stock firmware and flashed through odin but still data wasnt working,nd while in recovery mode i saw region INS ie India. then something came in my mind and.. .I changed it to NPL and now i can use data in only sim 1 only not in both sims. So i also may need some help.
For you *#272*IMEI# . Use your phones IMEI number there (*#06#) . Select NPL region.
NOTE: It will hard format your phone installing required carrier apps, aps, bla bla and hope work on your phone
Pujan Shrestha said:
I think your problem is the region is not set Nepal...I installed dark jb rom in my phone and data was gone since then. Then I manually downloaded stock firmware and flashed through odin but still data wasnt working,nd while in recovery mode i saw region INS ie India. then something came in my mind and.. .I changed it to NPL and now i can use data in only sim 1 only not in both sims. So i also may need some help.
For you *#272*IMEI# . Use your phones IMEI number there (*#06#) . Select NPL region.
NOTE: It will hard format your phone installing required carrier apps, aps, bla bla and hope work on your phone
Click to expand...
Click to collapse
I found that the hidden menu (& hence secret code dialing) was disabled in my phone. Following guides from Google search I enabled it. Now codes likes "*#06#",*#1111#", "*#0228#" etc are working, but "*#272*IMEI#" is not working. Any idea, why it is not working?
kkafle said:
I have a Samsung Galaxy S3 SCH-I535 CDMA Verizon & GSM phone. Originally it was on android 4.1.2 and working fine for both CDMA and GSM (one at a time). CDMA EVDO Rev A data service was working fine.
I am using this phone in Nepal (not in USA). It was carrier unlocked for both CDMA & GSM when I purchased from Amazon. (so, I guess, Originally it may had some customized firmware/ROM for International use, I don’t have much idea).
I was asked for firmware upgrade every time when I run Samsung Kies. One day I clicked to upgrade the firmware. The upgrade was over successfully. But the new android version I found on my phone was 4.4.2.
In this version /new upgrade, I was unable to use CDMA data (EVDO-rev A). So I wanted to reverse back to old version. I search the process in Google and tried to load firmware with the help of Odin3 using this file:- “I535VRBMF1_I535VZWBMF1_VZW.zip”, but it was not successful. Result: Fail(Auth)
Then I loaded firmware for 4.4.2 using Odin3.09 (AP: “I535VRUDNE1_I535VZWDNE1_I535VRUDNE1_HOME.tar.md5”) and now the phone is working.
• If I use GSM SIM I can make call and use HSPA data service as well by adding new APN.
• If I use CDMA RUIM I can make call, BUT DATA SEVRICE using CDMA EVDO Rev A is NOT WORKING!! (I can not save APN in this case).
Now my issue is how to make CDMA EVDO data service working in my phone, because my basic requirement is to use this phone for CDMA service (voice + data).
I can edit the APN but when I click “Save”, nothing was saved. So I can not select APN for my carrier. I tried using APN Manager Pro too, here I can enter & enable the APN, but did not work. The phone is not able to dial the data access code #777 (verified from CDMA service provider side trace).
Can someone help me what I should do to make my phone working for CDMA data. My phone is rooted.
I guess it may work for CDMA data if I downgrade it to 4.3 or 4.1.2,
Can I do that. If so what are the procedures / steps. Any help in this regard would be highly appreciable.
Click to expand...
Click to collapse
Well, it looks to me as though you've locked your bootloader and are now stuck on 4.4.2. For some reason, Verizon forces Samsung to lock their bootloaders, which means we (the consumers) cannot install "custom" firmware on our devices (or downgrade).
Once you're on 4.4.2 NE1 your stuck with it. No downgrade possible at least not without a Jtag service
Sent from my SCH-I535 using Xparent ICS Tapatalk 2
I have faced similar problem I can't create apn I am using it in India . So my data i not working on any sim card but i can make and receive calls . My android version is also 4.3 . So please help me i want to use both hspa and evdo .
Sent from my iPhone using Tapatalk
I'm on an old version and the activation number is not working for me. Does anyone have a saved PRL of the most current version? I can flash it using qpst or cdma-WS.
Prl auto push to 4G LTE verizon devices. If you really think you need an update, you can call them and have them push one to your phone.
For a few reasons I cannot do that. But if someone has PRL saved fomr QPST or CDMA WS that I could use, that would be great.
Also can I use an HTC Remix's PRL with my M8? Are they device specific and being that they are very similar would it work?
Sir I purchased a new unlocked S6 Edge ( 925A) at&t device from abroad to use in india.
The guy told it's fully unlocked and it support any sim card. Buy when I checked with Indian Sims I am getting only 2g signals .. I am not getting 3G and 4g signals..
When I checked for network selection mode settings it's missing in the settings.
No software OTA update is available. . I think it's also disabled.. when I checked the device status it is in "custom"..
So if I flash a stock ROM with Odin will it lock again ?
Do I need to unlock it again.. ??
First check the model from bootloader, if its actually a att variant then you can flash a stock rom too make it work as normal, but if its some other variant then get back to this thread again.
Its surely an at&t Variant of Samsung Galaxy S6 EDGE.. its model number is 925A.. which is only available for ATT..
Its baseband version is G925AUCU1AOCE
I purchased this phone as fully unlocked from UAE but in india when i start to use it i came to know that its not taking 3G and 4G signals .. but 2g Signal and Data services are working fine..
I got the phone in rooted condition without any Boot animation of At&t. Since its rooted i am not getting any official updates.
I am also facing many software bugs.. from different apps..
So really want to flash the phone with a new stock rom for using it..
I have some doubts about it please clear it..
1) if i flash it with an official att stock rom will it lock again for att network ?
2) can i remove the att boot animation after flashing with stock rom ?
Sent from my SM-925A using XDA Free mobile app
Providers in India use bands 3, 40, and 41 for LTE. The AT&T S6 Edge is only compatible with band 3.
I doubt you'd be able to flash a different ROM, and even if you could, you still wouldn't have compatibility with bands 40 or 41.
Firstly Thanks for your reply.. i know that S6 Edge at&t only support Band 3 LTE cuz it's a FDD LTE supported device.. in my country here providers are using both TDD & FDD LTE bands for LTE..
In my region "Kerala" at presently all the providers are using Band 3 which is compatible will my phone. But i am not receiving any LTE and 3G signals..
My friends have different unlocked phones from T-Mobile they are not facing any problem..
I am still doubt the flashing ROM.. i am going to flash the stock rom for at&t.. it's the only official rom available for my device.
It could be an APN issue. Make sure the settings are the same as your friends are using. Beyond that, I have no idea.
Nothing Wrong with the APN.. cuz i am using 2G data without any problems.
We have same APN for all 2G ,3G & 4G..
I think its the problem with my software..
I can't switch between LTE/WCDMA/2G because that network mode selection option is disabled or not available..
I am compelled to flash a new Rom..
I don't have any other options.
I own a good phone but i can't use it . Really sad about it..
for sure people here can help you more on this
http://forum.xda-developers.com/galaxy-s6-edge
I have my s6 Edge in Fully unlocked condition with Root Access also..i purchased it as unlocked from Dubai. But i cant find any Network Selection mode in my settings. Itz a ATT variant with model number 925A. The device is not taking 4G signals in india. Also there is no Network selection option in the settings to toggle between 3g & 4G..
Please help me?
Has anyone found a solution for the missing hotspot option in the settings, I am on metropcs(for now) so with that being said I have the MLS # and adding dun to the apn didn't help. I am rooted running a MOAR rom, I even tried editing the database file like suggested. Is there a rom that takes care of this or am I selling my new used phone?
Use a custom ROM to get the Hotspot. Go to the Sprint area and search for the Teleteam ROMs. There is a CDMA and GSM version, use the correct for your carrier network.
____
FYI: You MAY need to do a domestic unlock with octoplus box to get the hotspot.
Thanks, i tried a couple different roms, last night i loaded the Teleteam s8 oreo and that did the trick.