Database Info

[Q] Please help about updating my phone

Please i need your help about :
my phone is samsung galaxy i9003
my software now is jelly bean 4.1.2
I need to update my phoen to jb 4.2.2
can any one help me ??
i posted this thread in Q and A and no one help me
Please i need help
all i need to update my phone from android 4.1.2 to 4.2.2
please help me
Thanks ,,,

Hey bro follow this to make clean install (but this will wipe your data)
DO IT AT YOUR OWN RISK
1- make sure you have kies installed or just install galaxy sl usb drivers (thanks to Zulfauzi).
2-Download odin3 v1.85 from the attachments.
3-Download full DDLF2 from here (thanks to (thanks to sgatechwork).
4. Run Odin3 v1.85.
5. Check Re-Partition, Auto Reboot and F. Reset Time.
6. Click PIT button and select this file: latona_20110114.pit
7. Set it to download mode : Press Volume down + OK first, then hold Power button.
8. Connect USB cable and the program will detect the phone's Com number.
9. Click Start button to download the PIT file to phone.
10. After it is Done Click on Reset button [Partition box should be unchecked automatically - Thanks to jaskir].
11. Click PDA button and select this file: CODE_I9003DDLF2_CL1153545_REV08_user_low_ship.tar.md5.
12. Click PHONE button and select this file: MODEM_I9003DDLE1_REV_00_CL1149304.tar.md5.
13. Click BOOTLOADER button and select this file: APBOOT_I9003DDLF2_CL1153545_REV08_user_low_ship.tar.md5.
14. Click CSC button and select this file: GT-I9003-MULTI-CSC-ODDLF2_RST.tar.md5.
15: You should unplug usb cable, remove battery, insert battery and bring it back to download mode. I have never been able to bring it to download mode with usb plugged in. [Thanks to jaskir for this suggestion to make it clear to new users!].
16. Click Start button to flash these files to phone.
17. Do not touch anything till you see PASS on the program window.
18. Factory reset.
19. [To fix issues that pertain] Reflash from steps 9 -15 again, No need of latona at this point.
thanks to Misledz for the instructions (original thread here)(I only edited file names).
Now download any Jb 4.2.2 rom and carefully follow the OP instructions.
I suggest CM10.1 A8 by dhiru1602 (thanks to him), rom is verry stable and smooth.
if I helped you please hit the "thanks" button
Best regards

ASMI1 said:
Hey bro follow this to make clean install (but this will wipe your data)
DO IT AT YOUR OWN RISK
1- make sure you have kies installed or just install galaxy sl usb drivers (thanks to Zulfauzi).
2-Download odin3 v1.85 from the attachments.
3-Download full DDLF2 from here (thanks to (thanks to sgatechwork).
4. Run Odin3 v1.85.
5. Check Re-Partition, Auto Reboot and F. Reset Time.
6. Click PIT button and select this file: latona_20110114.pit
7. Set it to download mode : Press Volume down + OK first, then hold Power button.
8. Connect USB cable and the program will detect the phone's Com number.
9. Click Start button to download the PIT file to phone.
10. After it is Done Click on Reset button [Partition box should be unchecked automatically - Thanks to jaskir].
11. Click PDA button and select this file: CODE_I9003DDLF2_CL1153545_REV08_user_low_ship.tar.md5.
12. Click PHONE button and select this file: MODEM_I9003DDLE1_REV_00_CL1149304.tar.md5.
13. Click BOOTLOADER button and select this file: APBOOT_I9003DDLF2_CL1153545_REV08_user_low_ship.tar.md5.
14. Click CSC button and select this file: GT-I9003-MULTI-CSC-ODDLF2_RST.tar.md5.
15: You should unplug usb cable, remove battery, insert battery and bring it back to download mode. I have never been able to bring it to download mode with usb plugged in. [Thanks to jaskir for this suggestion to make it clear to new users!].
16. Click Start button to flash these files to phone.
17. Do not touch anything till you see PASS on the program window.
18. Factory reset.
19. [To fix issues that pertain] Reflash from steps 9 -15 again, No need of latona at this point.
thanks to Misledz for the instructions (original thread here)(I only edited file names).
Now download any Jb 4.2.2 rom and carefully follow the OP instructions.
I suggest CM10.1 A8 by dhiru1602 (thanks to him), rom is verry stable and smooth.
if I helped you please hit the "thanks" button
Best regards
Click to expand...
Click to collapse
Thanks for your reply
but there's another method about updating by CWM RECOVERY
do you know how this method done ?

dr_amjad said:
Thanks for your reply
but there's another method about updating by CWM RECOVERY
do you know how this method done ?
Click to expand...
Click to collapse
yes there is another way if you have recovery installed. Just tell us what ROM you are on (your 4.1.2 ROM name) and try to find out if you have CWM recovery(volume up+home+power). Let us know this this then we will proceed.
@ASMI1 :He is on a 4.1.2 OS means he have a custom ROM and re-partioning is not mandatory because he is comming for a CM10 base.

mustafahussain said:
yes there is another way if you have recovery installed. Just tell us what ROM you are on (your 4.1.2 ROM name) and try to find out if you have CWM recovery(volume up+home+power). Let us know this this then we will proceed.
@ASMI1 :He is on a 4.1.2 OS means he have a custom ROM and re-partioning is not mandatory because he is comming for a CM10 base.
Click to expand...
Click to collapse
Thank you very much mr mustafa
i download the ROM from video on youtube and this is link of video
http://www.youtube.com/watch?v=VqypSD3JBJk
It's CM 10 Alpha 3
And in the video there's a download link of the Rom and this is the link which in the video
http://forum.xda-developers.com/showthread.php?t=1868074
by the way : when i click power key there is an option called : Reboot
when i click on Reboot tell me that i can Reboot my phone and recovery and download mode
Thanks for your reply

If you like the jelly bean 4.1.2 (CM10) by Dhiru, surely you'll like the CM10.1 version.
It is in here. Review it for more details.
You will need the latest CM10.1 in Dhiru1602's downloads and this gapps..
Download both on the SD card. Then, basically this will be the instructions to install it:
Code:
Upgrading from previous versions of CM10
1. Reboot to Recovery.
2. Select the ROM zip from your SD Card and flash.
3. Flash Google Apps.
4. Reboot
PD: By the way, you can use the Reboot -> Reboot to recovery option you've mentioned.

Drizzt_Kueh said:
If you like the jelly bean 4.1.2 (CM10) by Dhiru, surely you'll like the CM10.1 version.
It is in here. Review it for more details.
You will need the latest CM10.1 in Dhiru1602's downloads and this gapps..
Download both on the SD card. Then, basically this will be the instructions to install it:
Code:
Upgrading from previous versions of CM10
1. Reboot to Recovery.
2. Select the ROM zip from your SD Card and flash.
3. Flash Google Apps.
4. Reboot
PD: By the way, you can use the Reboot -> Reboot to recovery option you've mentioned.
Click to expand...
Click to collapse
Thank you very much for your reply
i will try and tell you
but i will not do any thing about : Data wipe/Factory reset & 5. Format dbdata. , right ??

Drizzt_Kueh said:
If you like the jelly bean 4.1.2 (CM10) by Dhiru, surely you'll like the CM10.1 version.
It is in here. Review it for more details.
You will need the latest CM10.1 in Dhiru1602's downloads and this gapps..
Download both on the SD card. Then, basically this will be the instructions to install it:
Code:
Upgrading from previous versions of CM10
1. Reboot to Recovery.
2. Select the ROM zip from your SD Card and flash.
3. Flash Google Apps.
4. Reboot
PD: By the way, you can use the Reboot -> Reboot to recovery option you've mentioned.
Click to expand...
Click to collapse
I tried it
When i choose zip from sdcard and choose the rom tell me :
Installing : /sdcard/others/Cm10.1-Galaxy SL - JDQ39E-Alpha8.zip
Finding Update package ....
opening update package ....
E: Can't open / /sdcard/others/Cm10.1-Galaxy SL - JDQ39E-Alpha8.zip ( bad )
Installation aborted
What can i do ??

dr_amjad said:
I tried it
When i choose zip from sdcard and choose the rom tell me :
Installing : /sdcard/others/Cm10.1-Galaxy SL - JDQ39E-Alpha8.zip
Finding Update package ....
opening update package ....
E: Can't open / /sdcard/others/Cm10.1-Galaxy SL - JDQ39E-Alpha8.zip ( bad )
Installation aborted
What can i do ??
Click to expand...
Click to collapse
Redownload rom.
Sent from my GT-I9003 using xda premium

dr_amjad said:
I tried it
When i choose zip from sdcard and choose the rom tell me :
Installing : /sdcard/others/Cm10.1-Galaxy SL - JDQ39E-Alpha8.zip
Finding Update package ....
opening update package ....
E: Can't open / /sdcard/others/Cm10.1-Galaxy SL - JDQ39E-Alpha8.zip ( bad )
Installation aborted
What can i do ??
Click to expand...
Click to collapse
try to remove the rom zip from sdcard and copy it again from pc, this worked for me when I tried to install slim CM 7 by TheFrankenstain (here the thread if you wanted to try it..rom link here)(You rom is awesome TheFrankenstain...thank you)
If this didn't work then try to redownload the rom (don't use your phone to download roms...bad idea).
to make sure rom's archive is not corrupted, check you rom MD5 sum (Dev-Host server provide the correct MD5)
HashCheck is a good tool for this.
---------- Post added at 09:52 PM ---------- Previous post was at 09:29 PM ----------
dr_amjad said:
Thank you very much mr mustafa
i download the ROM from video on youtube and this is link of video
http://www.youtube.com/watch?v=VqypSD3JBJk
It's CM 10 Alpha 3
And in the video there's a download link of the Rom and this is the link which in the video
http://forum.xda-developers.com/showthread.php?t=1868074
by the way : when i click power key there is an option called : Reboot
when i click on Reboot tell me that i can Reboot my phone and recovery and download mode
Thanks for your reply
Click to expand...
Click to collapse
BE CAREFUL...You can only update to CM10.1 rom (or any other rom based on CM10.1) only if you have CM10 Alpha4 rom (or any other rom based on CM10 Alpha4)
But in your case (you have CM10 A3), you have to follow the whole guide mentioned in the second post.
This is what LoLaTiOn said:
How to install
Warning only for lasted base CM10 Alpha4
if older base CM10 Alpha3 Full KPE please !!!
- Wip Factory
- Format/system format/emmc
- Flash Carbon and gapps
- Reboot recovery
- Wipe cache and dalvik cache
Flash first clean for mandatory starting
On CM10 Alpha 3 and all other basic Froyo, Gingerbread, ICS, JB
Click to expand...
Click to collapse
................
thread here.
If you are worried about your data make full backup using recovery and you can restore your apps or your full rom at any time...clean Install is always recommended over updating from previous versions.
BTW...I think full Nandroid restore is dangerous due to different partitioning in ICS/JB roms so it's recommended always to reparation using odin and install full firmware again.
Also, any custom rom is rooted and deodexed and has CWM recovery pre-installed.
sorry for my bad english

ASMI1 said:
try to remove the rom zip from sdcard and copy it again from pc, this worked for me when I tried to install slim CM 7 by TheFrankenstain (here the thread if you wanted to try it..rom link here)(You rom is awesome TheFrankenstain...thank you)
If this didn't work then try to redownload the rom (don't use your phone to download roms...bad idea).
to make sure rom's archive is not corrupted, check you rom MD5 sum (Dev-Host server provide the correct MD5)
HashCheck is a good tool for this.
---------- Post added at 09:52 PM ---------- Previous post was at 09:29 PM ----------
BE CAREFUL...You can only update to CM10.1 rom (or any other rom based on CM10.1) only if you have CM10 Alpha4 rom (or any other rom based on CM10 Alpha4)
But in your case (you have CM10 A3), you have to follow the whole guide mentioned in the second post.
This is what LoLaTiOn said:
................
thread here.
If you are worried about your data make full backup using recovery and you can restore your apps or your full rom at any time...clean Install is always recommended over updating from previous versions.
BTW...I think full Nandroid restore is dangerous due to different partitioning in ICS/JB roms so it's recommended always to reparation using odin and install full firmware again.
Also, any custom rom is rooted and deodexed and has CWM recovery pre-installed.
sorry for my bad english
Click to expand...
Click to collapse
Thank you very much mr ASMI 1 for your reply
but sorry i am still Noob in android development and updating
but according to your reply i must do :
- Wip Factory
- Format/system format/emmc
- Flash Carbon and gapps
- Reboot recovery
- Wipe cache and dalvik cache
Right ??
and please is there a video about my case (( updating samsung gt i 9003 from cm 10 alpha 3 to cm 10.1 alpha 8 )) ??
and sorry for annoyance you

ASMI1 said:
try to remove the rom zip from sdcard and copy it again from pc, this worked for me when I tried to install slim CM 7 by TheFrankenstain (here the thread if you wanted to try it..rom link here)(You rom is awesome TheFrankenstain...thank you)
If this didn't work then try to redownload the rom (don't use your phone to download roms...bad idea).
to make sure rom's archive is not corrupted, check you rom MD5 sum (Dev-Host server provide the correct MD5)
HashCheck is a good tool for this.
---------- Post added at 09:52 PM ---------- Previous post was at 09:29 PM ----------
BE CAREFUL...You can only update to CM10.1 rom (or any other rom based on CM10.1) only if you have CM10 Alpha4 rom (or any other rom based on CM10 Alpha4)
But in your case (you have CM10 A3), you have to follow the whole guide mentioned in the second post.
This is what LoLaTiOn said:
................
thread here.
If you are worried about your data make full backup using recovery and you can restore your apps or your full rom at any time...clean Install is always recommended over updating from previous versions.
BTW...I think full Nandroid restore is dangerous due to different partitioning in ICS/JB roms so it's recommended always to reparation using odin and install full firmware again.
Also, any custom rom is rooted and deodexed and has CWM recovery pre-installed.
sorry for my bad english
Click to expand...
Click to collapse
(( if older base CM10 Alpha3 Full KPE please !!! ))
what the meaning of KPE ??
and i must do this ?? (( if older base CM10 Alpha3 Full KPE please !!! ))

dr_amjad said:
(( if older base CM10 Alpha3 Full KPE please !!! ))
what the meaning of KPE ??
and i must do this ?? (( if older base CM10 Alpha3 Full KPE please !!! ))
Click to expand...
Click to collapse
it means that if you have a base older to CM10 Alpha 3 then you should proceed with full KPE,,,
so IF YOUR CURRENT ROM IS ON CM10 Alpha 3 I would suggest just flash CM10 Alpha4 base ROM by Dhiru then,
-Wipe Factory
- Format/system format/emmc
- Flash Carbon and gapps
- Reboot recovery
- Wipe cache and dalvik cache

mustafahussain said:
it means that if you have a base older to CM10 Alpha 3 then you should proceed with full KPE,,,
so IF YOUR CURRENT ROM IS ON CM10 Alpha 3 I would suggest just flash CM10 Alpha4 base ROM by Dhiru then,
-Wipe Factory
- Format/system format/emmc
- Flash Carbon and gapps
- Reboot recovery
- Wipe cache and dalvik cache
Click to expand...
Click to collapse
Now i have Cm 10 alpha 3
you want me to do these steps :
-Wipe Factory
- Format/system format/emmc
- Flash Carbon and gapps
- Reboot recovery
- Wipe cache and dalvik cache
and update my phone to Cm 10alpha 4 or cm 10.1 alpha 8 ?????????

dr_amjad said:
Now i have Cm 10 alpha 3
you want me to do these steps :
-Wipe Factory
- Format/system format/emmc
- Flash Carbon and gapps
- Reboot recovery
- Wipe cache and dalvik cache
and update my phone to Cm 10alpha 4 or cm 10.1 alpha 8 ?????????
Click to expand...
Click to collapse
No, to upgrade from previous version of CM10 follow this:
1. Reboot to Recovery.
2. Select the ROM zip from your SD Card and flash.
3. Flash Google Apps.
4. Reboot
Click to expand...
Click to collapse
and then
-Wipe Factory
- Format/system format/emmc
- Flash Carbon and gapps
- Reboot recovery
- Wipe cache and dalvik cache
here where to download CM10 A4 and google apps(20121011 for CyanogenMod 10.0.x) (thanks to master dhiru1602).
BTW, in the past we used to install XXKPE stock rom (pit, bootloader, PDA, Phone, and CSC)(this is what meant by full KPE) and then install DDLF2 as PDA in download mod. But now full DDLF2 is out so we don't need XXKPE anymore to make clean install, you just install full DDLF2 (pit, bootloader, PDA, Phone, and CSC) the same way you install XXKPE and then proceed with installing your custom rom.
it is recommended to make clean install always before installing any custom rom (CM or rom based on CM) to prevent any issue (installing custom rom over another custom rom may cause some problems like lags and no signal issue...etc) just make clean install.
I advise you to upgrade only if, for example; you want to update to REMICS rom and you have previous version of REMICS rom or you want to update to carbon rom and you have previous version of carbon rom or you want to update to CM10.1 A8 rom and you have previous version of CM10.1 A7 rom...Do you get my point?

[STOCK ROM][LB] Huawei Ascend P2 - B021

I've finally managed to find another copy of the stock Ascend P2 firmware [P2-6011V100R001C00B021]
Flashing is easy, just copy the dload folder to the root of your internal memory and use the system update app to apply a local update.
The ROM can be rooted using eRoot.
More tweaks and other mods for this rom will follow soon.
Downloads:
P2-6011V100R001C00B021
eroot v1.3.3

Thank you Angelbob! I can finally have the B021 update

Very cool I assume I can flash it even if I've removed some of the stock Apks from my current rom?
By the way there's a p2tools apk on the server- Whats it for?

Mine fails to update, after the system reboots in the Android recovery system.
Fails to mount E: /SDcard. Runs through the "checking module" stuff, and after Checking module Cust it writes Huawei SD card update fail..
and continues
cust copying files...
copy cust files successed!
and then the huge
FAIL.
I'm probably doing something wrong but what could it be?

Try a factory reset first
Sent from my C6603 using Tapatalk

How well does this ROM work?
EDIT: I also cannot get this ROM installed.
Could it be because I am already running BO25?
I tried factory resetting as you suggested to the other person, it made no difference.

Tried factory reset also, made no difference

Mine updated fine.
I thought this would remove the silly operator logo that comes up when i turn on my phone and remove all the apps installed by the operator, but it's all still there.
Is this just a 'kernel' update or am i missing something here?
Thanks.

Impossible for me to install the B021... Error in the recovery when flashing
I'm with B007...

HI
anyone had success in flashing this on P2 which locked to 3 UK network?

the same for me !!
The same : "Impossible for me to install the B021... Error in the recovery when flashing
I'm with B007... "

Can somebody please help me get down to BO21, I am stuck on the appalling BO25 and there is still no fix released!

same problem here. update fails in the check part. I have edited the buid.prop. can anyone send me the build.prop for the B021 version?

Mabe new update !!!
xixorro said:
same problem here. update fails in the check part. I have edited the buid.prop. can anyone send me the build.prop for the B021 version?
Click to expand...
Click to collapse
I worked the last 8 Hours on a update for the huawei p2.
in few minutes i will try it.
PlS Hope with me :angel:

davide_94 said:
I worked the last 8 Hours on a update for the huawei p2.
in few minutes i will try it.
PlS Hope with me :angel:
Click to expand...
Click to collapse
I extracted the build.prop file from a stock ROM someone sent me and was able to update. you made your own update. what will it do?

xixorro said:
I extracted the build.prop file from a stock ROM someone sent me and was able to update. you made your own update. what will it do?
Click to expand...
Click to collapse
the update zip is mixed with the huawei p6 omni rom based on 4.4.4.
but i get error during install the zip.
error status 6

_wolfpup said:
Can somebody please help me get down to BO21, I am stuck on the appalling BO25 and there is still no fix released!
Click to expand...
Click to collapse
You ought to try this method to downgrade your ROM.
1) your P2 must have root access;
2) find in the "default.prop" file (you'll find it in the "/" directory) and change "B025" to "B020" for example:
ro.confg.hw_bootversion=P2-6011V100R001C00B025...
3) find in the "build.prop" file and change all "B025" to "B020" for example:
ro.confg.hw_systemversion=P2-6011V100R001C00B025_SYSTEM
ro.build.display.id=P2-6011V100R001C00B025
ro.build.version.incremental=C00B025
ro.build.description=P2-6011-user 4.1.2 HuaweiP2-6011 C00B025 ota-rel-keys,
ro.build.fingerprint=Huawei/hwp2-6011:4.1.2/HuaweiP2/C00B025
ro.product.CustDVersion=B025 (here can be any other values, these are only for example).
Having changed all the above-mentioned values, you will be able to downgrade your B025 ROM to B021. Just remember, that a ROM version in the edited "default.prop" and "build.prop" must be lower than a ROM version which you want to downgrade to.
Good luck!

Android 4.4.2 Omni Rom successfully installed
l0l0l0 said:
still no custom rom for this device
Click to expand...
Click to collapse
History
At the first time i tried to build my own custom Rom Mixed with the Huawei P2 + Huawei P6. After installing my own rom my Huawei P2 system was death.
After i tryed a lot of hours to fix it but nothing helps.
All partitions were lost. I tryed to install the stock recovery and update the phone using Update.app. ( But didnt work)
i tryed really all things. but nothing works. Only one thing.
Step by Step Instruction:
Follow the instructions on your own risk
1- Download the B510 Update for the huawei P6 ""Download""
2- Download the Huawei Update extractor ""Download""
1. In Profiles Select Huawei P6
2. Choose the Update file that you have downloaded.
3. Mark
- system.img
- userdata.img
- cust.img
- boot.img
4. Right click on a market line and select "create flashable zip"
3- Download this Openrecovery ""Download""
4- Download ADB And Fastboot ""Download""
5- Extraxt the Adb/Fastboot zip file In a folder
6- Copy the recovery.img in the same folder
7- Open the folder and press "shift" + "right-click" on a free place in the folder select "Open command window here"
8- Make shure Usb Debuging is enabled and connect your phone with the PC
9- type "adb reboot bootloader"
10- type "fastboot flash recovery recovery.img"
11- type "fastboot reboot"
12- during startup press "power" + vulume-up + volume-down" at same time and wait for the recovery
13- Select "wipe" "swipe to factory reset"
14- Select "wipe" "format data"
15- Select "advanced" "adb sideload" "swipe to start sideload"
16- move youre flashable zip into the same folder (like recovery.img)
17- Open command window (Step 7-)
18- type "adb sideload "your-zip-name".zip
19- now the install beginn and you have the P6 Firmware installed (Dont try to reboot your Phone it dosnt work)
20- Download Omni Rom and Gapps ""Homade Rom Download"" ""Stable Omni Rom 4,4,2 Download"" ""Gapps Download""
21- Firs install the Homade Version (same like step 1
22- now install the Stable Omni Rom 4,4,2 (same like step 1
23- wipe cache and dalvik
24- install Gapps (same like step 1
25- wipe cache and dalvik
26- Congratulation You Have now a Huawei P2 Phone with The Huawei P6 Firmware And Omni Custom Rom 4.4.2
Follow the instructions on your own risk
Please Give me a feadback if it work.:good:
Say thanks If it work :good:
Knowed Issue:
Phonespeaker works only after plugin a headset and unplug.....

I'm going to try this now, thanks for posting this. If it works I'll owe you big time. :victory:
---------- Post added at 03:48 PM ---------- Previous post was at 02:54 PM ----------
Tried it and it says invalid file when trying to open the update.app file from the B510.zip
I extracted the B510 file and tried to open update.app
http://prntscr.com/49gglp

jdcrispe95 said:
I'm going to try this now, thanks for posting this. If it works I'll owe you big time. :victory:
---------- Post added at 03:48 PM ---------- Previous post was at 02:54 PM ----------
Tried it and it says invalid file when trying to open the update.app file from the B510.zip
I extracted the B510 file and tried to open update.app
http://prntscr.com/49gglp
Click to expand...
Click to collapse
go to original Post ==>
There is all things updated

help please i have no root access on a rooted galaxy note

hello would you please help me,
i have a galaxy note gt-i9220 but i have root it along time a go soo i can use google services and i have change the name to n7000 soo i can instal Ultimate_N7000_LT4_JB_4.1.2_v6 but after that i instaled another rom build number is ILLUSION_N7000-USERDEBUG 4.3JSS15Q and i want to get back to the ultimate rom but when i go to recovery SD card wont open in only show 3 files , and superuser said : gaining root access fail and root cheker said the device is not rooted i dont know what to do i hate this rom PLEASE HELP ME

adilharrak said:
hello would you please help me,
i have a galaxy note gt-i9220 but i have root it along time a go soo i can use google services and i have change the name to n7000 soo i can instal Ultimate_N7000_LT4_JB_4.1.2_v6 but after that i instaled another rom build number is ILLUSION_N7000-USERDEBUG 4.3JSS15Q and i want to get back to the ultimate rom but when i go to recovery SD card wont open in only show 3 files , and superuser said : gaining root access fail and root cheker said the device is not rooted i dont know what to do i hate this rom PLEASE HELP ME
Click to expand...
Click to collapse
if you have philz recovery then click auto root or download and flash the latest supersu from chainfire's thread and flash it from recovery, but why do you need root access to flash rom? you just need a custom recovery

eatsleep said:
if you have philz recovery then click auto root or download and flash the latest supersu from chainfire's thread and flash it from recovery, but why do you need root access to flash rom? you just need a custom recovery
Click to expand...
Click to collapse
no i got CWM-based recovery v6.0.3.4 , when i go to [instal zip] and [choose zip from sdcard] dosent show my files it shows only
-0
-clockworkmod
-obb/
thats it and all of them ar empty , and whene i go back an click on reboot system now it says [root access possibly lost. fix? i hit yes and no change. its make me insane

adilharrak said:
no i got CWM-based recovery v6.0.3.4 , when i go to [instal zip] and [choose zip from sdcard] dosent show my files it shows only
-0
-clockworkmod
-obb/
thats it and all of them ar empty , and whene i go back an click on reboot system now it says [root access possibly lost. fix? i hit yes and no change. its make me insane
Click to expand...
Click to collapse
It's probably in 0/ folder....
---------- Post added at 08:06 PM ---------- Previous post was at 08:05 PM ----------
eatsleep said:
It's probably in 0/ folder....
Click to expand...
Click to collapse
You may try mounting the sd card.........
Just a wild guess, do search on it before doing it

eatsleep said:
It's probably in 0/ folder....
---------- Post added at 08:06 PM ---------- Previous post was at 08:05 PM ----------
You may try mounting the sd card.........
Just a wild guess, do search on it before doing it
Click to expand...
Click to collapse
This --> http://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7000/philz_touch_6.19.3-n7000.zip is the latest PhilZ advenced CWM for you N7000. download the zip file and flash it via your installed recovery.
Then install SuperSU 1.93 again

eatsleep said:
It's probably in 0/ folder....
---------- Post added at 08:06 PM ---------- Previous post was at 08:05 PM ----------
You may try mounting the sd card.........
Just a wild guess, do search on it before doing it
Click to expand...
Click to collapse
well the 0/ folder is emty how i can flash philZ recovery and i can get an access to my sdcard?

adilharrak said:
well the 0/ folder is emty how i can flash philZ recovery and i can get an access to my sdcard?
Click to expand...
Click to collapse
You're familiar with using "Odin" to flash a firmware/recovery?

LS.xD said:
You're familiar with using "Odin" to flash a firmware/recovery?
Click to expand...
Click to collapse
i always use it when i need it but would you help me to show me how to flash philZ recovery using odin ? please

adilharrak said:
i always use it when i need it but would you help me to show me how to flash philZ recovery using odin ? please
Click to expand...
Click to collapse
sure. just a second i creat a short guide with picture
for now you can download:
Odin v 1.85
PhilZ CWM 6.9.13
How to:
-Close every KIES process or better uninstall it.
-But make sure driver is installed properly Letest USB drivers (Only use if you have not installed a working driver)
-Extract Odin to your desktop
-Put "philz_touch_6.19.3-n7000.tar.md5" in the "Odin" folder
-Start Odin
-Connect your Galaxy Note to your computer in "DOWNLOAD" mode
and make sure that everything is set as in my picture

press "START"
If your Galaxy Note decides to scream and run away then its not my fault.
This should be safe BUT its you modify the Galaxy Note.

[Q] downgrade Slimkat to nexesque

Hello !
I use a Slimkat ROM weekly 5.8 build 4901 but GPS doesnt works.So I want to downgrade to Nexesque 3.6.Can you explain me the correct way to do it?Do I need RDS?

aleram said:
Hello !
I use a Slimkat ROM weekly 5.8 build 4901 but GPS doesnt works.So I want to downgrade to Nexesque 3.6.Can you explain me the correct way to do it?Do I need RDS?
Click to expand...
Click to collapse
The idk how to read post of the day
Nexesque 3.6 thread http://forum.xda-developers.com/showthread.php?t=2510965
Copy and pasted straight from the first post which you were unable to read
DOWNLOAD LINK (v3.6 November 22, 2013) (KERNEL INCLUDED)
Direct Download Link Here
*changelog and additionally OPTIONAL ADDON for customizing Rom (thanks hallokitty for the step by step guide) in post #2*
DOWNLOAD LINK (v3.5 October 9, 2013) (KERNEL INCLUDED)
Direct Download Link Here
*changelog and additionally OPTIONAL ADDON for customizing Rom (not part of original Nexesque release, thanks hallokitty for the step by step guide) in post #2*
** COMPATIBLE WITH BOTH LOCKED AND UNLOCKED BOOTLOADERS **
TWRP / CWM INSTRUCTIONS:
1. Be rooted and bootloader unlocked with twrp or CWM (Safestrap Users, See post #4)
2. Factory reset
3. Mount System
4. Install ROM
5. Wipe Cache
6. Enjoy
------------------------------------------
Further flashing instructions if required
Try putting file into root of SD card or internal storage. Before performing the full wipe make sure system is mounted as well. And double check system is mounted before flashing. If coming from another Rom make sure it was 4.1.2.
If previous Rom was higher than 4.1.2 then flash this before Nexesque: http://d-h.st/5EV
What is SlimKat? 4.4. What does the paragraph above say? If previous Rom was higher than 4.1.2 then flash this before Nexesque: http://d-h.st/5EV

palmbeach05 said:
The idk how to read post of the day
Nexesque 3.6 thread http://forum.xda-developers.com/showthread.php?t=2510965
Copy and pasted straight from the first post which you were unable to read
DOWNLOAD LINK (v3.6 November 22, 2013) (KERNEL INCLUDED)
Direct Download Link Here
*changelog and additionally OPTIONAL ADDON for customizing Rom (thanks hallokitty for the step by step guide) in post #2*
DOWNLOAD LINK (v3.5 October 9, 2013) (KERNEL INCLUDED)
Direct Download Link Here
*changelog and additionally OPTIONAL ADDON for customizing Rom (not part of original Nexesque release, thanks hallokitty for the step by step guide) in post #2*
** COMPATIBLE WITH BOTH LOCKED AND UNLOCKED BOOTLOADERS **
TWRP / CWM INSTRUCTIONS:
1. Be rooted and bootloader unlocked with twrp or CWM (Safestrap Users, See post #4)
2. Factory reset
3. Mount System
4. Install ROM
5. Wipe Cache
6. Enjoy
------------------------------------------
Further flashing instructions if required
Try putting file into root of SD card or internal storage. Before performing the full wipe make sure system is mounted as well. And double check system is mounted before flashing. If coming from another Rom make sure it was 4.1.2.
If previous Rom was higher than 4.1.2 then flash this before Nexesque: http://d-h.st/5EV
What is SlimKat? 4.4. What does the paragraph above say? If previous Rom was higher than 4.1.2 then flash this before Nexesque: http://d-h.st/5EV
Click to expand...
Click to collapse
I already tried to flash boot.IMG but I got the phone stuck on M logo.Then I reboot on recovery and reinstalled Slimkat 4.4... if you are so gentile to suggest any other solutions is better than tell me I am unable to read post.I have read all....

aleram said:
I already tried to flash boot.IMG but I got the phone stuck on M logo.Then I reboot on recovery and reinstalled Slimkat 4.4... if you are so gentile to suggest any other solutions is better than tell me I am unable to read post.I have read all....
Click to expand...
Click to collapse
did you flash that, then flash the ROM before heading back to SlimKat?

palmbeach05 said:
did you flash that, then flash the ROM before heading back to SlimKat?
Click to expand...
Click to collapse
Yes...when I have installed the rom I read the message status 7 installation aborted set_perm ....I checked file updater script in meta inf...I formatted system data cache then mounted all and flashed the ROM bit nothing...

resolved changing philz touch recovery to cwm 6.0.4.4 with flashify...bit the signal line is off.Already patched to enable full GSM functions....any idea?

CM11 RC 10 Status 0 Installation aborted

Hi guys
first of all: i am a total newb. Please be gentle :fingers-crossed:
I tried to install the latest build from here http://download.androidarmv6.org/_builds/beni/stable/
I did follow the beginners guide (partially because some links are dead).
What i did so far:
root (not from the beginners guide)
CWM 5 from the guide
then up to CWM 6.0.5.0 http://forum.xda-developers.com/galaxy-fit/orig-development/dev-cwm-recovery-upd-20140707-t2808196
wipe data / reset
wipe cache partition
wipe dalvik cache
install zip - > choose cm11 rc10 -> status 0 installation aborted
iSanecheck stated that the update-binary must be replaced: http://forum.xda-developers.com/showthread.php?t=2581415&page=41
But i have no clue how to do that. And i cant reply in this thread, because i am a total newb.
Please help me

Extract cm11-RC10 that u have. Then goto META-INF/com/google/android/update-binary & replace this update binary. Then zip this file & flash it.
Pls. see if this works for u coz me too want to flash latest cm11s but confused b/w TLS recovery mentioned on jenkins & this update binary thing.

I followed your instructions and tried it again. It now says Installation abort. Just without Status 0.

Try this by iSanechek:
iSanechek said:
use this recovery.img, maybe running.
I'm not responsible for anything you do with your beni
Click to expand...
Click to collapse
Pls. do post ur feedback.

Galaxy_Rohit said:
Extract cm11-RC10 that u have. Then goto META-INF/com/google/android/update-binary & replace this update binary. Then zip this file & flash it.
Pls. see if this works for u coz me too want to flash latest cm11s but confused b/w TLS recovery mentioned on jenkins & this update binary thing.
Click to expand...
Click to collapse
use this recovery. no need to replace binary. I checked, it works!
but
I'm not responsible for anything you do with your beni
Click to expand...
Click to collapse

Can i install it without terminal emulator? Just zip ? Because i cant boot to the system and i did not any backup. :x

rillrill said:
Can i install it without terminal emulator? Just zip ? Because i cant boot to the system and i did not any backup. :x
Click to expand...
Click to collapse
heh, only terminal, but give me a minute I'll think about .zip
Ps one moment, I'll check it works or not.))
Pss upload on google drive.)
CWM 6.0.5.3 in .zip

Thanks for the work!
I got it updated and it completed the installation of the latest nightly build (20140913). Thank you very much!