Hey guys, basically, as the title says, after flashing CWM with Odin, (and enabling debugging before hand) I know cannot flash any ROM zips as the internal SD is (computer says no)
I've also tried TWRP with ADB drivers but still cannot get access to my note to transfer another zip to another directory or push across, and after trawling though what seem's like most of the internet back and forth through endless pages I have a bootlooping note I've only had a few hours
its the GT-8020...
anyways you guys have helped me before with quandries and hopefully someone could spare the time and knowledge to help me out, that would be amazing!
thanks in advance!
(and apologies for posting a Q in the Development thread!) D'oh!
SOLVED
Related
hi guys, I am new to this forum and I just purchased a g tablet today. Because of all the reviews and info that I found here is why I decided to buy it. Now I am stuck trying to install the clockwork and tnt. I've been following to the t the instructions posted here and I even was able to convert tnt from .rar to.zip but I can't do crap!!!
is there anyone that can help me? Is there anyone here from Miami that has been able to do this and can help me out? I can pay a few $$ for your time and help.
thanks,
Frankie
if you get tntlite 4.4.0 just copy the update.zip into the root of the internal storage. make sure you are on the right stock rom 1st.
from there make sure you have a file in your internal called recovery it should have the command file in it (if it isn't in there you can ether make one of copy the one he has packaged with 4.3)
from there reboot holding the + vol and it will flash tnt lite 4.4
now as for CWM recovery.
once tnt is installed factory reset (trust me this will make things easyer and more stable)
go into the google market and get the terminal emulator
once you have this installed open it and throw in these commands.
SU
(this is for super user rights press yes once super user appears)
cwmrecovery.sh
(this command will execute a script that will load a flash tool and install CWM recovery it will only take a few seconds to flash)
from there you are done. i know it is backwords for installing recovery last. but sad to say this is how i did it. TNT lite has integrated a copy of CWM and the vanilla recovery and the dev has added a pack tool for being able to switch between these two recoveries.
okay! it's been 2 days playing with this g tablet and I am about to slamm it to the ground!!! I really don't get it! I've followed the steps one by one exactly how it is described in this forum and in this link:
http://forum.xda-developers.com/showthread.php?t=865245
And I've had no luck at all! it is still factory set. I can't even find the markewt or the Google Services Framework at the applications settings menu.
What the hell am I doing wrong here? please some one please help me!!
Thanks,
Frankie
well!!! finally I got it working! everything is installed! the only problem I have now, is that when I connect it to my usb cable, my desktop won't recognize my g tablet and the tablet says: usb debugging connected with the android logo. Anyone have any suggestions?
Thanks in advance
Here is the tut I followed to get advanced running
http://developer.nvidia.com/tegra/taxonomy/term/7/0
Sent from my GTablet-TnT-Lite
Well i need your help etc. a help of the proffesional's ...i bought this phone,and something with it is wrong, when i turn the phone on , i got stucked at boot screen and it's endless waiting. can somebody help me and tell me what to do ...?
love you all people...
Sorry to necropost, but I've searched the forum and couldn't really find an appropriate thread/ sub-topic except for this.
I have a Galaxy I7500 phone with the GAOSP beta 3(2.2). Each time I tried to boot, the GAOSP loading screen would bootloop. I've tried the following methods:
1) Downloaded the Samsung drivers
2) Re-flashed through the installation of GAOSP, but the process would be stuck at the cmd; fastboot is not recognized as an internal/ external command despite I've installed the Android 1.0
I reformatted the SD card because I wanted to wipe out the data. Little did I realize that the crucial system files were wiped out too. Only the mini-recovery and the download mode are available. But I'm not able to mount the storage since the phone wouldn't load at all.
Suggestions are appreciated.
EDIT: Tried the 'push' the rectools.tar.gz via cmd but the command wasn't recognized.
Bump. No one experiencing the same issue?
Bump. Seriously, no one that lend a hand here?
Bump. Need help here
Hi everyone!
I need, please help with a Chinese phone I just bought.
Some information about the phone:
MC603CH, board cellonsz73_gb, MT6573 ARMv6 797.90mhz, MC7305.zheng.V1.en display, brand Yusu, total 214 Mb RAM, 130 Mb internal space, external 3.7 Gb, Imagination Technologies GPU, OpenGL ES 2.0, currently running Android 2.3. 5 Kernel 2.6.35.7.
In Windows 8 on Mac and was recognized as HTC (Windows as My HTC). Turns out I can not stand just looking for that kind of device without having the urge to start moving in everything and in every way (especially since it's my first Android). I did root, installed a bunch of app to change the system and found a script that makes the Apps recognize a partition EXT4 like to have more internal space to install applications. The last two things I did while he was connected were able to install BusyBox to make the system recognize the init.de folder so I can run scripts in the beginning of the section and, silly me, make a run in the script.
He was pretty one, running everything is fast with the ROM that was running, which it came (modified to look like iOS), but after running the script, it restarted and went into boot loop. Then I try to recover the poor, and went hunting for information ... flash rom did (I was afraid to try installing and kill him at once), then I found a video that said I could try clearing the cache, I tried, I removed the USB cable from the computer to wait for the battery dies (it does not restart the button is in loop) and nothing.
I found another video that told me to go back to factory settings purchases that could go right.
The problem is I can not get into recovery mode by buttons (already tried all possible combinations and does not enter the recovery). I managed, after Google searches, and find the adb installed, managed to make it into the recovery by adb! Then I thought I could do everything that was needed to revive the pet. I fell to the tale of the factory settings, and I gave myself badly. Now the adb condegue not recognize the phone, I believe it is because he is no longer on usb debuging (factory settings), so now I'm here at all in the stirring cell, trying to find a way to disconnect the battery and do not think (believe only a technician can or someone with technical knowledge) so I can try some procedures using software I found (SP flash tools, tools mtkdroid, Android AIO flasher, etc.). To get drivers that worked in Portcom has been very difficult, I tried several until you find what the Windows install left. Well, it's more or less what is happening to me. I hope you can find someone to help me on this, because, as I said, it's my first android and I can not buy another one for a long time (I have a wife and four children, i can not spend too much ) and it cost me R$ 590.00 (Brazil) and not just pay. If anyone can help me, I am very grateful.
God bless you. Sorry for english from Google Translator.
Hej,
If you just can get into the recovery you could flash any rom made for your phone, just get the zip on your SD card and install through recovery.
Try to get into recovery through fastboot if your phone is supported and next time you root your android just do a nandroid backup.
dR.BaNaNe said:
Hej,
If you just can get into the recovery you could flash any rom made for your phone, just get the zip on your SD card and install through recovery.
Try to get into recovery through fastboot if your phone is supported and next time you root your android just do a nandroid backup.
Click to expand...
Click to collapse
Hi Dr.Banane! Thanks for responding!
The point is that I can not go into recovery mode at all the buttons on this phone.
The only ways in which I saw the screen of recovery mode this cell were: 1 by 2 by adb root manager when
I was with usb debugging enabled. I need to figure out exactly how to enter the recovery mode, because I think it
I will be able to access adb again and be able to delete the folder init.d script or do some flash ROM.
By the way, does the ROM Sophone MT6575 will work on it or kill it once?
Thank you. God bless you.
learned alot from your question
Wppley said:
Hi Dr.Banane! Thanks for responding!
The point is that I can not go into recovery mode at all the buttons on this phone.
The only ways in which I saw the screen of recovery mode this cell were: 1 by 2 by adb root manager when
I was with usb debugging enabled. I need to figure out exactly how to enter the recovery mode, because I think it
I will be able to access adb again and be able to delete the folder init.d script or do some flash ROM.
By the way, does the ROM Sophone MT6575 will work on it or kill it once?
Thank you. God bless you.
Click to expand...
Click to collapse
Look at this and maybe it will help you:
http://forum.xda-developers.com/showthread.php?t=1929957
You have to flash a recovery.img and boot.img with computer but i don´t know if it´s possible without USB-debugging OFF, but atleast you can try.
dR.BaNaNe said:
Look at this and maybe it will help you:
http://forum.xda-developers.com/showthread.php?t=1929957
You have to flash a recovery.img and boot.img with computer but i don´t know if it´s possible without USB-debugging OFF, but atleast you can try.
Click to expand...
Click to collapse
Ok, thanks Dr. I will try this.
Please tell me someone knows a way to get into recovery mode?
Edit: I think i found the model of my phone: Sophone 4s v5 or Gooapple v5, I'm not sure.
Thanks.
God bless you.
Sorry for flood, but anybody can help me please? Think i loose my recovery. What can i do? Please!
Thanks,
Edit 16 02 13: I have in my hands another one cell ecxately same of mine, but im not able to get a backup of their rom, please help me, im almost in the goal!
Thanks. God bless you.
Edit 17 02 13: I would like to thank Dr. Banane and all the help that friends here from XDA have done to help me.
Thank God I managed to grab the rom from a device identical to mine and restore my Android. I learned a lot in those days I tried and tried and could help in forums with this topic: http://forum.xda-developers.com/showthread.php?t=1683883.
So i wanted to root my Wileyfox swift, i got the zip and installed it.... the bootloop/stuck at boot.
So i tried resetting, reinstalling, etc. etc....
The i wanted to reinstall the os from cyanogenmod website, so on and so on. Needed to do it with zip file but my recovery wouldn't open zip from sd, and i couldn't get it on main storage. So i try to install cwmr and some other recovery via fastboot, but the only thing that gets me is that the bad but working recovery i had installed stops working or gets deleted or something.....
So i try every guide on the internet to install cyanogen, recovery, and other stuff. but with no luck. Then i find this guide:
community.cyngn.com/t/wileyfox-swift-update-gone-totally-wrong-partially-to-phone-and-incompetent-owner/1132/2
and i do everything it says. Type: Fastboot reboot
aaand my phone stops working... my pc makes the "connected " sound when i plug in in usb. but hte notification lights are out, and the screen is out... also when charging..
So smart people at xda forums what do i do?
note that the phone was bought from amazon.co.uk and i am from denmark so i don't think i can get a repair from there.... plz help!
BenTheWizzard said:
So i wanted to root my Wileyfox swift, i got the zip and installed it.... the bootloop/stuck at boot.
So i tried resetting, reinstalling, etc. etc....
The i wanted to reinstall the os from cyanogenmod website, so on and so on. Needed to do it with zip file but my recovery wouldn't open zip from sd, and i couldn't get it on main storage. So i try to install cwmr and some other recovery via fastboot, but the only thing that gets me is that the bad but working recovery i had installed stops working or gets deleted or something.....
So i try every guide on the internet to install cyanogen, recovery, and other stuff. but with no luck. Then i find this guide:
community.cyngn.com/t/wileyfox-swift-update-gone-totally-wrong-partially-to-phone-and-incompetent-owner/1132/2
and i do everything it says. Type: Fastboot reboot
aaand my phone stops working... my pc makes the "connected " sound when i plug in in usb. but hte notification lights are out, and the screen is out... also when charging..
So smart people at xda forums what do i do?
note that the phone was bought from amazon.co.uk and i am from denmark so i don't think i can get a repair from there.... plz help!
Click to expand...
Click to collapse
Greetings and welcome to xda. I am not familiar with your device but we do have a dedicated forum for it here
http://forum.xda-developers.com/wileyfox-swift
there should be plenty of experts there to help you. I did find this thread though that seems quite relevant to your issue
http://forum.xda-developers.com/wileyfox-swift/help/bricked-swift-pls-help-t3289530
Good Luck
Sawdoctor
Hello,
I hope it is the right place to ask for help .... The automatic system update failed and now the tablet is stuck at Android System Recovery Screen. Wipe Data / factory reset does not bring the system back, so I guess I need to upload rom / update from sd card - I got option "apply update from sd card".
So, please, help me to recover from this situation as my tablet is stuck .... I do not have or could not find the right files to use with "apply update from sd card."
Or, any links to the tutorial for updating / uploading rom for this model will help ...
Thank You very much in advance.
Kindest Regards
Lukasz
I solved the problem by uploading the rom again.
1) SPF Tool + MTEK drivers for win
2) Official ROM
Just two things:
a) if SPF throws error you need to choose upgrade firmare not download
b) you need to take off the back cover and unattach the battery otherwise it will not work
Have a nice day
Lukasz
Hi !
Thanks for confirming that you solved your problem !
I will now move your thread to the dedicated section .
Cheers
Hi everyone. Just did the solution like what Luqpa_W said but my tablet is still bootlooping on lenovo screen. There is no problem during flashing and everything seems fine during flashing. I do not really understand what is the problem with my tablet. If someone knows how to deal with it, please let me know.
_____
EDITED: My tablet just got booted! After several times of reboot, it seems working. Thanks!