I have been ready to flash eos4 using twrp 2.3.2.3 and found the steps todo it and i have a couple of noob questions. The first question is after full wipe /factory reset then it says format system do i wipe system or use format data button? And i read if you format data you must reboot back into recovery.2nd question is if i install eos4 build #91 can i flash to build #176 next ?? Sorry for the noob ????but i dont want to brick the tablet
Thanks
thunderman98 said:
I have been ready to flash eos4 using twrp 2.3.2.3 and found the steps todo it and i have a couple of noob questions. The first question is after full wipe /factory reset then it says format system do i wipe system or use format data button? And i read if you format data you must reboot back into recovery.2nd question is if i install eos4 build #91 can i flash to build #176 next ?? Sorry for the noob ????but i dont want to brick the tablet
Thanks
Click to expand...
Click to collapse
You do not need to format Data. This is rare. When flashing a different flavor of ROM, use the top 4 wipe buttons (cache, Davlik, factory, system)
When flashing between different versions of the same ROM, wipe Cache, Davlik and System (not Data).
Then flash the ROM, GAPPs and optional Kernel.
Related
hi,
i just rooted my mz601 3.2 and i want to install the ics everest.
can someone please let me know how i can wipe the xoom prior the ics flash?
i have cwm recovery installed .
many thanks!!
Boot into recovery you'll find a list of options there. It would also be a good idea to read "Xoom Heaven" posted in the general section first.
Your going to have to Wipe Data and factory Reset, Wipe Cache partition than scroll to advanced and Wipe the Dalvik Cache. After that go to Install zip from SD card.
thanks Guys,
i manage to install the Ics and everything is fine.
what cache / data do i need to wipe when i will flash an updated ics rom?
do i stiil need to wipe all of the above and loose my aps and data again?
thanks!!
I Personally like to do the full wipe thing, just as you did before. Because that's one less thing you don't have to consider when having problems.
Hey, I'm currently on MIUI ics. I know I have to wipe/factory reset everything. But is it safe to flash on the current CWM? Or do I need to update it or something? Do I just flash the new JB rom like I would switching from MIUI to a stock ics rom? I'm a noob, sorry if this doesn't make sense.
What version of CWM are you running?
You should be fine, but it never hurts to check. You flash a JB rom just like any other. Wipe wipe wipe and flash.
The whole wipe wipe wipe is completely unnecessary. One wipe is sufficient and any additional won't do anything.
It's like saying that unless you wipe exactly 3 times the Android Gods are going to demand a human sacrifice for your phone to boot.
lol i think dvorak meant wipe cache, wipe dalvik cache, wipe data (wipe wipe wipe) but that's my take..
anyway, if you can flash MIUI ICS with whatever CWM version you currently have, you should be able to flash other JB ROM. Nandroid as always.. Goodluck!
Sent from my Nexus S using xda premium
jacob66 said:
Hey, I'm currently on MIUI ics. I know I have to wipe/factory reset everything. But is it safe to flash on the current CWM? Or do I need to update it or something? Do I just flash the new JB rom like I would switching from MIUI to a stock ics rom? I'm a noob, sorry if this doesn't make sense.
Click to expand...
Click to collapse
This is what I did :
1. Boot into recovery and perform a nandroid backup of my MIUI installation.
2. Wipe.
3. Flash XenonHD 9 JB ROM + marmite 4.2 kernel.
My phone is running really smooth now. Good luck.
[email protected] said:
lol i think dvorak meant wipe cache, wipe dalvik cache, wipe data (wipe wipe wipe) but that's my take../QUOTE]
Yep, that's it. Of course wiping everything 3 times would be unnecessary.
Click to expand...
Click to collapse
jacob66 said:
Hey, I'm currently on MIUI ics. I know I have to wipe/factory reset everything. But is it safe to flash on the current CWM? Or do I need to update it or something? Do I just flash the new JB rom like I would switching from MIUI to a stock ics rom? I'm a noob, sorry if this doesn't make sense.
Click to expand...
Click to collapse
if you get a cluster f*#@ of problems then clean install. It isn't that hard. Use Titanium Backup and good to go.
In Recovery:
1. wipe data/factory reset (this formats /data, /cache and .android_secure on sd)
2. format /system, /boot
this leaves you with only bootloader, recovery and radio...dalvik-cache resides on /data, so it's gone already.
3. flash rom
4. gapps & custom-kernel (if needed). No need to let the phone boot & settle before flashing them (most custom-kernels have a script that automatically wipes /cache & dalvik during kernel-install)
5. reboot
6. Run TB -- restore missing apps with data --1st option under restore
just updating rom:
1. flash rom-zip
2. wipe /cache and dalvik-cache
3. reboot
Do this before reporting any issues on the thread since the problems are often related to this and not the ROM or kernel.
Hi everyone, I tried the rom on this link http://forum.xda-developers.com/showthread.php?t=1782009 and so far everything is great, I installed GAPPS... I think... I'm kind of a noob :/
Anyway everytime I open the Play Store it just closes in a nano second! And when I open the internet browser or other apps like that it says [Unfortunately, the process android.process.acore has stopped]
I used the HTC Sensation 4G AIO kit by Hasoon 2000 v2.0 for everything.
Can anyone please help me
you haven't done full wipe ..before flashing the ROM i think
go to recovery ...and do full wipe
if CWM recovery -> wipe->factory reset + wipe cache + wipe dalvik
if 4EXT recovery ->wipe/format->format everything except sdcard
then flash the ROm and then gaaps
that will do
btw when you do full wipe ..you lose all data of the phone ..apps/messages/call logs etc etc
ganeshp said:
you haven't done full wipe ..before flashing the ROM i think
go to recovery ...and do full wipe
if CWM recovery -> wipe->factory reset + wipe cache + wipe dalvik
if 4EXT recovery ->wipe/format->format everything except sdcard
then flash the ROm and then gaaps
that will do
btw when you do full wipe ..you lose all data of the phone ..apps/messages/call logs etc etc
Click to expand...
Click to collapse
Thank you
Hello all. I know this is a noob question and Im sorry, but I need to ask.
When Im flashing a custom rom (going to try EOS again) what exactly do I need to wipe?
Im using TWRP. I know that I need to wipe the Cache, Dalvik Cache and system. Do I also choose the Factory Reset option? How about Internal Storage? Then there is the Format Data option. Which of these should I do?
JohnnyDanger said:
Hello all. I know this is a noob question and Im sorry, but I need to ask.
When Im flashing a custom rom (going to try EOS again) what exactly do I need to wipe?
Im using TWRP. I know that I need to wipe the Cache, Dalvik Cache and system. Do I also choose the Factory Reset option? How about Internal Storage? Then there is the Format Data option. Which of these should I do?
Click to expand...
Click to collapse
If you do a factory reset, you don't have to worry about wiping anything else.
As for what to wipe for installing a custom ROM, it depends. EOS recommends a factory reset when you are flashing their ROMs going from any other type of ROM, including stock. If your on ICS, to jellybean, factory reset. 4.1 to 4.2, factory reset. One nightly to the newer one, you don't have too.
Internal storage is not something you want to wipe... that is any pictures, files, music etc. etc. that you have on the tablet, it will be the same as when you unlock the bootloader, you lose EVERYTHING!! Factory reset, you won't lose anything that isn't on the system partition.
Make sure you are on the latest version of the recommended recoveries
Perfect. The information you gave is exactly what I needed. Thanks Draxin.
I followed these instructions to install [ROM][P31xx][4.4.4] SlimKat on my P3113:
http://forum.xda-developers.com/showthread.php?t=2619109&highlight=3113
How to install:
Download the Rom for your device and copy to your Tablet
Reboot into Recovery
Wipe Data Factory Reset
format /system
Wipe cache
Wipe dalvic cache
flash Rom
flash GApps
And it went wrong, I don't know why. I used CWM 6.0.2.3. Please, see the picture attached.
HowardAnton said:
I followed these instructions to install [ROM][P31xx][4.4.4] SlimKat on my P3113:
http://forum.xda-developers.com/showthread.php?t=2619109&highlight=3113
How to install:
Download the Rom for your device and copy to your Tablet
Reboot into Recovery
Wipe Data Factory Reset
format /system
Wipe cache
Wipe dalvic cache
flash Rom
flash GApps
And it went wrong, I don't know why. I used CWM 6.0.2.3. Please, see the picture attached.
Click to expand...
Click to collapse
It could be caused by a few things. It usually means outdated recovery. @Android-Andi has recovery thread in the Dev section with the latest versions of PhilZ, TWRP, and CWM. Try flashing one of those. Also, make sure you check the md5/sha1 on the downloaded file to make sure it isn't corrupt.
Sent from my SGH-T989
EDIT: my stupid phone put Italy when I was trying to type usually...
HowardAnton said:
I followed these instructions to install [ROM][P31xx][4.4.4] SlimKat on my P3113:
http://forum.xda-developers.com/showthread.php?t=2619109&highlight=3113
How to install:
Download the Rom for your device and copy to your Tablet
Reboot into Recovery
Wipe Data Factory Reset
format /system
Wipe cache
Wipe dalvic cache
flash Rom
flash GApps
And it went wrong, I don't know why. I used CWM 6.0.2.3. Please, see the picture attached.
Click to expand...
Click to collapse
Status 7 error means your recovery is outdated. Grab one of the latest versions from here: http://forum.xda-developers.com/showthread.php?t=2676180 flash it and your good to go.
Guys,
Thank you very much! I did it!
HowardAnton said:
Guys,
Thank you very much! I did it!
Click to expand...
Click to collapse
Very good! Have a good afternoon.
jrc2
Sent from my SGH-T989