Hey everyone, i have a problem with my lg optimus one p500 when i try to install stock rom, using KDZ sotware update. I will post bellow log file from KDZ.
I have to mention that i followed up all steps for installing stock rom
I hope that somebody can help me.
What can i do to pass this error?
" [R&D Test Tools Log File]
12:40:34 : Launching SW update
12:40:34 : Unpacking KDZ
12:40:45 : KDZ file extraced
12:40:56 : Files were extracted.
12:40:56 : LGMobileDL Load.
12:40:56 : Port = -1
12:40:56 : Connecting to phone
12:41:06 : Check Phone mode = 1
12:41:24 : Phone type check.......
12:41:29 : LGMobileDL.DLL Loading....
12:41:29 : _SetAuthMark Fail
12:41:29 : AuthMark°ˇ Á¤Č®Č÷ Phoneżˇ Write µÇÁö ľĘľŇ˝Ŕ´Ď´Ů!
12:41:29 : _SetAuthMark Fail
12:41:29 : LoadCDMAPhoneData() Error
12:41:29 : _DetachDLL Call
12:41:29 : _DetachDLL Call End
12:41:29 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\LGP500AT-00-V20g-VDF-RO-JUN-14-2011+0-DZ.dz
12:41:29 : Param : moduleDir =
12:41:29 : Param : waitTime = 0
12:41:29 : Param : UsbHighSpeed = 1
12:41:29 : Param : PhoneMode = 1
12:41:29 : Param : BinVersion = V20G_00
12:41:29 : Param : AuthMark = 0
12:41:29 : Call fn_StartUpgrade
12:41:56 : Smart : wParam = 100, lParam = 502
12:41:56 : Step : Upgrade Error error code = 502
12:41:56 : ResetStartInfo() Call
12:41:56 : _DetachDLL Call
12:41:56 : _DetachDLL Call End
12:41:56 : FreeLibrary Call
12:41:56 : FreeLibrary Call End
12:41:56 : ResetStartInfo() Call End
12:41:57 : ===FINISHED===
12:42:03 : OnModelDllMsg(OnMsgFromModelDll3GQCT_PDA) delete m_pLGCyonUpdate
"
Look like u interrupted the flash. Did you?
Sent from my NFEfied P500
allenwalker1998 said:
Look like u interrupted the flash. Did you?
Sent from my NFEfied P500
Click to expand...
Click to collapse
Definitely NO, maybe the problem is that i'm trying to install in emergency mode, because this is the only way i can at the moment. I will attach a photo with the error , although this should result in log file
DO NOT REMOVE THE BATTERY
1. Restart KDZ
2. Change PhoneMode to "Emergency" and flash
3. If doesnt work repeat above steps, but choose "CS_EMERGENCY"
Yes do not remove battery until the successful flash. As i hard bricked my LG Optimus One few days back, when I removed battery after KDZ error.
Have patience and be careful.
Dam I think I may have done the same to one of mine after a kdz error. Is there no hope at all after doing this?
Sent from my GT-I9300 using xda app-developers app
STAticKY said:
Dam I think I may have done the same to one of mine after a kdz error. Is there no hope at all after doing this?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Usually, no. Not unless you are fortunate enough to get the device in to fastboot mode. Usually this isn't a possibility.
Oh well. Another brick to add to the collection : P
Sent from my GT-I9300 using xda app-developers app
I really do believe that the OS plays a part in these errors. I recommend using KDZ on Windows XP. Windows 7/8 had "compatibility issues" for me.
shinobisoft said:
Usually, no. Not unless you are fortunate enough to get the device in to fastboot mode. Usually this isn't a possibility.
Click to expand...
Click to collapse
I think this should become a requirement:
http://forum.xda-developers.com/showpost.php?p=15122833&postcount=100
Might be very useful in a situation like this.
If you use KDZ afterwards, I believe it will remove fastboot, but then again that's why you have fastboot in the first place (to use it as an alternative to KDZ).
I gave it a go last year, and sure enough, I was able to boot into fastboot, so the method in that link is safe.
I guess ill try installing xp on vmware workstation and give it a go there and if that fails I may have to whip up an pc to install xp on to test....
Sent from my GT-I9300 using xda app-developers app
STAticKY said:
I guess ill try installing xp on vmware workstation and give it a go there and if that fails I may have to whip up an pc to install xp on to test....
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
For me it also worked on windows 7. So i think you can also give one more try.
Sent from my LG-P500 using xda premium
hi dear friends,
I am also facing emergency mode problem after flashing.
I have used kdz-updater to update and between the update, it showed an error. After that phone wasn't turning on at all. I thought it is bricked. I gave it to service center and they managed to boot to the emergency mode. They gave it back to me saying that they are getting error while installing OS.
Now the phone is booting only to emergency mode. I need to take the battery out to switch it off. I tried again with kdz-updater and getting the same error [screenshot and log files attached]. I have tried 'Emergency', 'Diag' and 'Cs_Emergency' modes and always getting the same error. Disabled Android modem also.
I have also tried with LGMDP tool. It is showing download completed succesfully, but it is showing my IMEI number as 'NOT_ACTIVE' [screenshot attached].
I guess may be the kdz-updater is failing because there is no valid IMEI. Unfortunately, I dont have a backup of NV2 file.
Is there any chance to get my phone back?
Please guide me what to do next.
PS. Sorry for my bad English.
jofin said:
hi dear friends,
I am also facing emergency mode problem after flashing.
I have used kdz-updater to update and between the update, it showed an error. After that phone wasn't turning on at all. I thought it is bricked. I gave it to service center and they managed to boot to the emergency mode. They gave it back to me saying that they are getting error while installing OS.
Now the phone is booting only to emergency mode. I need to take the battery out to switch it off. I tried again with kdz-updater and getting the same error [screenshot and log files attached]. I have tried 'Emergency', 'Diag' and 'Cs_Emergency' modes and always getting the same error. Disabled Android modem also.
I have also tried with LGMDP tool. It is showing download completed succesfully, but it is showing my IMEI number as 'NOT_ACTIVE' [screenshot attached].
I guess may be the kdz-updater is failing because there is no valid IMEI. Unfortunately, I dont have a backup of NV2 file.
Is there any chance to get my phone back?
Please guide me what to do next.
PS. Sorry for my bad English.
Click to expand...
Click to collapse
Your in the same boat as me buddy.... I don't think there is much hope. The only progression I've had from where you are at is doing that all over again and again till it worked using a fresh install of xp and lgmdp. (After leaving battery out for considerable amoumt of time after each try). I managed to flash fast boot onto it which is slight progress but then it just breaks whenever it wants, hence me saying there isn't much hope. Not very scientific of an explanation, just my experience. My guess is emmc/nv corruption on a mass production level.flawed chips that that are destined to die.... Just my 2 cents... Hope that helps..
Sent from my portable powerhouse using Tapatalk 4
STAticKY said:
Your in the same boat as me buddy.... I don't think there is much hope. The only progression I've had from where you are at is doing that all over again and again till it worked using a fresh install of xp and lgmdp. (After leaving battery out for considerable amoumt of time after each try). I managed to flash fast boot onto it which is slight progress but then it just breaks whenever it wants, hence me saying there isn't much hope. Not very scientific of an explanation, just my experience. My guess is emmc/nv corruption on a mass production level.flawed chips that that are destined to die.... Just my 2 cents... Hope that helps..
Sent from my portable powerhouse using Tapatalk 4
Click to expand...
Click to collapse
Thanks STAticKY for the reply.
One last try to bring back my mobile to life.
Is there any tool that can generate nv2 file based on my IMEI number?
I found one tool in XDA, but it's allowing to enter only last 5 digits of my IMEI number, and it is for LG KS20 model.
If I get the tool, I can generate nv2 file and try to restore it to my P500.
Or can somebody help me to get the nv2 file based on my IMEI number?
Thanks..
jofin said:
Thanks STAticKY for the reply.
One last try to bring back my mobile to life.
Is there any tool that can generate nv2 file based on my IMEI number?
I found one tool in XDA, but it's allowing to enter only last 5 digits of my IMEI number, and it is for LG KS20 model.
If I get the tool, I can generate nv2 file and try to restore it to my P500.
Or can somebody help me to get the nv2 file based on my IMEI number?
Thanks..
Click to expand...
Click to collapse
I've tried that but no luck either. I found a gen here on xda that let you change the whole imei not just the last bit.. Can't remember what it was called though.. I don't actually think your/mine nv2 is corrupted cos like I said I was able to get it working and nv2 was fine and I was able to use the networks to send/receive but then it shat its self again. So yea.. Its a tricky one.
Sent from my portable powerhouse using Tapatalk 4
Can u people boot to fastboot
Sent from my LG-P500 using xda app-developers app
anaknin said:
Can u people boot to fastboot
Sent from my LG-P500 using xda app-developers app
Click to expand...
Click to collapse
Phone is booting to Emergency mode only.
I tried to enter fastboot mode by pressing Homekey, Powerkey and Volume down button, but after showing the LG logo for 1 second, always it is going to the Emergency mode.
Suggestions are welcomed to get the mobile back to life.
:crying:
Hello!
I have a lg p500 and it is stuck in emergency mode. It is not flashed or anything but it is stock.What's wrong with it?
Gkikas said:
Hello!
I have a lg p500 and it is stuck in emergency mode. It is not flashed or anything but it is stock.What's wrong with it?
Click to expand...
Click to collapse
Have you tried removing time battery for awhile then trying to reboot? If the recovery is stock you can perform a factory reset. Remove the devices battery. Reinsert devices battery. Push and hold Power+Volume Up+Volume down for 10 seconds. If that doesn't work then only other suggestion is a service center or buy another phone. I have 2 P506's that are stuck in Emergency Mode. Best of luck.
shinobisoft said:
Have you tried removing time battery for awhile then trying to reboot? If the recovery is stock you can perform a factory reset. Remove the devices battery. Reinsert devices battery. Push and hold Power+Volume Up+Volume down for 10 seconds. If that doesn't work then only other suggestion is a service center or buy another phone. I have 2 P506's that are stuck in Emergency Mode. Best of luck.
Click to expand...
Click to collapse
I did it but it does it several times and then the phone starts for some reason uknown... I am going to buy another phone in one month or so but for the moment I need this phone cause I don't have another one and I was thinking to maintain it a bit.
Related
Hello,
I have been searching for three weeks now, and I can't find a solution. My phone has been stuck on the yellow "emergency mode" screen this entire time. I thought it was about time to make a thread, hoping it will help me.
On other forums and threads, people said to use the KDZ updater. I have, but sometimes it spits my phone out saying not found, until I read "use CS_Emergency Mode as a last resort." I did this, and now, even when regularly turning on the phone, its takes me to Emergency Mode, instead of the android screen bootloop. Now, every time, the KDZ updater will say
[R&D Test Tools Log File]
14:42:29 : Launching SW update
14:42:29 : Unpacking KDZ
14:42:30 : KDZ file extraced
14:42:31 : Files were extracted.
14:42:31 : LGMobileDL Load.
14:42:31 : Port = -1
14:42:31 : Connecting to phone
14:42:31 : PHONE WAS NOT FOUND!
14:42:33 : ===FINISHED===
.
I have tried to reinstall the drivers over and over again, but this is always the same result. The LG Mobile Support tool detects my phone, but will always tell my to reboot my phone and try again. This never works. Even the hard reset button combination will not work, it just spits me back to the Emergency Mode.
Please help, Thanks.
(AT&T has already stated that my warranty is void, as I have rooted and modified my ROM.)
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
You need to download pc odin and reflash the root kernel. Can you enter download mode?
Sent from my GT-N7000 using XDA
No, download mode does not seem to be working either. Tried that for almost 15 minutes, but took me right back to emergency mode.
Hi, this is my first time to post here but i really need help, I installed ClockworkMod Recovery v5.8.4.5 on my LG Optimus L3 E400, I used ROM Manager to install it. but then sometime a while ago, i accidentally selected Update Software on my phone software update option, Now I was stuck at the Clockworkmod recovery screen. I panicked and wipe data factory reset, but still it goes back to CWM. then I tried backup and then restored it afterwards it said restore complete with no error but still goes back to recovery. I also tried KDZ updater with no luck so far. I also tried wiping up everything and restore with no success..Please help
LG E400 ClockWorkMod Recovery Boot Loop
Hello, another android noob here, for 5days stuck with the same problem as TS, and anyone else using the LG (e400) update on CWM atleast v5.8.4.5
* i know this is also discussed in : http://forum.xda-developers.com/showthread.php?t=1610666&page=39, but more centralized would suit this forum, and help a lot of others i think ?
ive tried....
restoring the backup i created with the LG PC Suite software, no luck..
using the lg mobile support tool to restore, error: version not supported !?
installing the following zip's using CWR install from sdcard, except not fixing the boot-loop, the following installed without any problems
stockrom+.zip
stock_recovery_restorer.zip
cm-9-20120831-NIGHTLY-e400.zip
these failed with error:
uninstall-CWR.zip error: error in uninstall-CWR.zip (file on HD seems ok, redownloaded anyway, no change)
CWM-Installer-E400.zip error: installation aborted
LG_E400_Stock_Recovery+MountPoints.zip error: installation aborted
then i tried....
ADB fastboot , after: adb reboot-bootloader , the com4 connection in "xp: devices: ports" disappears, and adb devices + fastboot devices cant find the phone
last 5 lines on phone itself:
udc.start
reset
portchange
reset
portchange
* the phone hasnt crashed at this point, each time when i reconnect the usb it will reset and portchange (twice)
* a few times i got past this, and got:
STALL GET_DESCRIPTOR 128 6 1006 018
reset
portchange
reset
portchange
* since i couldnt install the sdk/extra/google usb drivers (error: contains no info for your hardware), ive tried with these usb drivers:
LGUnitedMobileDriver_S4981MAN36AP22_ML_WHQL_Ver_3.6.exe
LGUnitedMobileDriver S4981MAN37AP22 ML WHQL Ver 3.7.2.exe
* adb interface in devices shows: AndroidNet Sooner Single ADB interface
then i tried the KDZ_FW_UPD.exe option to flash : V10I_00.kdz , didnt work
found another KDZ option for lg (LgFlashPackacge) on acidhazardRom with: UpTestEX_mod2_marwin.exe, that also didnt work
both end with (loose translation from dutch) : error in MOD UpTextEx MFC Application, program terminated
ive also been reading: http://forum.xda-developers.com/showthread.php?t=1186406&page=5
* the battery loading animation hasnt been showing since the cwr boot-loop started
thinking about trying a new xp install (Again), but im hoping there is some fault in my previous work, or something else i didnt try !?
im about to give up on this and send the phone to LG, but that would feel like a defeat
LG e400 Boot Loop after LG Update
ive tried the options again...and wrote down some more info, i also reinstalled a clean XP : SP3 (incl all updates, except powershell)
installed: LG Mobile support tool incl designated lg drivers
it all looks fine, connects and will detect the phone model, but when "checking software version"
(still in the analysis screen) it stops with "Software update is not supported for this model"
*im guessing thats because of the cwm recovery ?
ADB Fastboot
installed: java - jre-7u5-windows-i586-iftw.exe
adb devices will only show my lg when in recovery menu
adb reboot-bootloader
the screen starts with: USB Init , then a lot of data pases like userdata, persist, cache and tombstones
(they all share status 0x0 <- if that means anything to anyone ?)
fastboot erase recovery and fastboot flash recovery recovery.img both end with [waiting for device]
fastboot devices, produces nothing (not even an error)
KDZ
edit: with msxml 4.0 SP3
once i plug in the usb the phone will show the LG logo, i cant mannualy put it in emergency mode
ive tried using kdz on the lg-logo and cwm recovery screen, i also tried Diag and Emergency modes,
the whole process always looks fine, there are no error lines in the logs, althoug it doesnt seem like a problem,
there is only one blank line:
Param : moduleDir =
all logs end with:
23:00:27 : Step Complete : UPDATE FINISHED!
23:00:27 : ResetStartInfo() Call
23:00:27 : _DetachDLL Call
23:00:27 : _DetachDLL Call End
23:00:27 : FreeLibrary Call
23:00:27 : FreeLibrary Call End
23:00:27 : ResetStartInfo() Call End
23:00:27 : ===FINISHED===
then i get the MOD UpTextEx program terminated error, i can still access the KDZ_FW_UPD.exe till i close the error window
edit: also tried...
- as very 1st step to restore the cwm backup
- adb + kdz under Vista
- lg mobile support tool, emergency mode under support option, gives another version error on entering imei or serial
I just wanna ask ..
Where does your phone stuck? In Clockwork recovery or in the LG's logo screen? What version of windows are you using?
nickocelot said:
Hi, this is my first time to post here but i really need help, I installed ClockworkMod Recovery v5.8.4.5 on my LG Optimus L3 E400, I used ROM Manager to install it. but then sometime a while ago, i accidentally selected Update Software on my phone software update option, Now I was stuck at the Clockworkmod recovery screen. I panicked and wipe data factory reset, but still it goes back to CWM. then I tried backup and then restored it afterwards it said restore complete with no error but still goes back to recovery. I also tried KDZ updater with no luck so far. I also tried wiping up everything and restore with no success..Please help
Click to expand...
Click to collapse
I think you need come back to default Rom Stock of your LG Optimus .After that you can do step by step to update Rom use ClockworkMod Recovery again. If still get error ,you need review the Rom want update for your phone has appropriate or not ?
Good luck.......^^
When i start my phone it will go straight to CWM recovery menu, when i connect to usb when the phone is off it will show lg logo
ClockWorkMod Rom Tools Recovery
ive been working with pc's for over 20years, doesnt matter how you mess up ..theres an easy fix, i was approaching my little LG with the same trust of available tools
ironically, i had installed the Clockworkmod ROM Tools as a safeguard, since i kept reading that its backup was the best
my lesson learned:
since you can backup your stuff and recover with the LG tools, and use other apps for the other functions, theres no point in risking bricking your phone ....when you dont really need it
also im glad i choose to buy an LG since -apparently- i can still send my phone for repair without any costs, considering it all, thats a great service ...almost a miracle
ill keep lurking to see the Cyanogenmod progress, which ill probably install with a multiboot app instead of CWM
feel free to disagree / discuss my opinion
can you please share your back-up please?:crying:
Same problem here! I don't know why on earth I tried to do the OTA update...
exitrecovery.zip didn't help either.... damn
EDIT: Did this: http://forum.xda-developers.com/showthread.php?t=1610666&page=43 and got it working again!!!
The same problem but I didn't no how to fix it!
Hi guys:crying:,
I do have te same problem of you have to but I doesn't know how to fix it.
From google I have found this tread and that's why I've become a member.
All what you guys said, I doesn't understand how t ofix it by myself with the same way too.
Can anybody please tell me a easier way for a beginner as I am?
Thanks already!
Sorry for bad English.
I'm not a noob. I'm a Super noob :crying: I just bricked my LGP690 trying to flash it with Unofficial Cyanogen Mod 10 . I was using ClocworkMod Recovery as per the video. But I was never able to boot the phone again. It just shows the lg logo. I tried to get into emergency mode and flash official LG firmware into it using this, but the flasing didn't succeed. Now I can't even get to emergency mode. The phone just shows the LG logo. PLEASE PLEASE PLEASE help me . I just dont want my phone to get bricked. I just want my phone back please help :crying:
:crying::crying::crying::crying::crying:
Check out this thread...i assume that u r able to enter fastboot mode...
forum.xda-developers.com/showthread.php?t=1827723
Sent from my Optimus One running PA 2.52 by ByteCode.
You could try asking herehttp://forum.xda-developers.com/showthread.php?t=1411500
We fixed it !!! unbricked LGP690
Thanks for your support guys It is fixed. Previously while using unbrick techniques from karandeedps post I was getting Error WParam : 100 LParam : 6 in KDZ . Actually while flashing the phone needs to be in emergency mode. In my case , I could connect the phone to the computer only in Emergency mode so when KDZ started it would restart the phone and it would not be able to get in Emergency mode. After about 36 hrs of tikering a simple idea struck me, well I was stupid not to use it initially .
I manually put the phone in Emergency mode as KDZ was unable to it by holding POWER + VOLUME DOWN + RETURN and voila there came the emergency mode and within a few minutes flashing was complete and the phone is alive again.....
This time I'll use the proper method as described in Unofficial LG Optimus Net Thread and see if it works .... If it doesn't ..... Well , I know I have a superb community to help me out ....
THANKS :laugh:
I Bricked My Phone It Won't Turn On No Lights No Recovery No LG Logo Nothing Computer Won't Recognize The Phone Please Help Me I Had CM9 Tried Flashing CM10 Failed Booting So I Used KDZ To Go Back To Stock And Failed So I Panicked And Removed The Battery It Won't Boot Up I Have A LG Optimus T
Samsung Has A Jig
Motorola Has A Factory Cable
LG Has? Anything Similar??
Sent from my SAMSUNG-SGH-T769 using xda premium
Jserrano56 said:
I Bricked My Phone It Won't Turn On No Lights No Recovery No LG Logo Nothing Computer Won't Recognize The Phone Please Help Me I Had CM9 Tried Flashing CM10 Failed Booting So I Used KDZ To Go Back To Stock And Failed So I Panicked And Removed The Battery It Won't Boot Up I Have A LG Optimus T
Samsung Has A Jig
Motorola Has A Factory Cable
LG Has? Anything Similar??
Sent from my SAMSUNG-SGH-T769 using xda premium
Click to expand...
Click to collapse
Are you able to get the phone to Emergency mode by holding power + volume up + back button. 3 days ago when I soft bricked it , I was able to see the LG logo (Mine is Optimus 690 , and I get your's is based on Optimus 500). If emergency is working then you may try this .
Do make sure to disable the LG modem in device manager after connecting it to PC.
No Emergency Mode No Lights No Recovery No LG Logo Nothing Computer Won't Recognize The Phone
Samsung Has A Jig
Motorola Has A Factory Cable
LG Has? Anything Similar?? Any Unbrick Tool/ Device By Or For LG Phones?
Sent from my SAMSUNG-SGH-T769 using xda premium
you need jtag, my friend. Contact connexion2005/mobiletechvideos.
Sent from my Nexus 7 using Tapatalk 2
Ok I Will Later Today I'm At School Now Had A Delayed Start Due To Snow I Will Contact Them At 5:30 Or 6 PM Central Time Zone USA Today
Sent from my SAMSUNG-SGH-T769 using xda premium
Jserrano56 said:
No Emergency Mode No Lights No Recovery No LG Logo Nothing Computer Won't Recognize The Phone
Samsung Has A Jig
Motorola Has A Factory Cable
LG Has? Anything Similar?? Any Unbrick Tool/ Device By Or For LG Phones?
Sent from my SAMSUNG-SGH-T769 using xda premium
Click to expand...
Click to collapse
try this , even if its not the same model, the software screen might come up. Nothing bad to try eh ! http://forum.xda-developers.com/showthread.php?t=1846750
Hope it works !
I'll Try As Soon As I Get Home
Sent from my SAMSUNG-SGH-T769 using xda premium
panchtatvam said:
try this , even if its not the same model, the software screen might come up. Nothing bad to try eh ! http://forum.xda-developers.com/showthread.php?t=1846750
Hope it works !
Click to expand...
Click to collapse
It Didn't But Thanks
Sent from my SAMSUNG-SGH-T769 using xda premium
panchtatvam said:
I'm not a noob. I'm a Super noob :crying: I just bricked my LGP690 trying to flash it with Unofficial Cyanogen Mod 10 . I was using ClocworkMod Recovery as per the video. But I was never able to boot the phone again. It just shows the lg logo. I tried to get into emergency mode and flash official LG firmware into it using this, but the flasing didn't succeed. Now I can't even get to emergency mode. The phone just shows the LG logo. PLEASE PLEASE PLEASE help me . I just dont want my phone to get bricked. I just want my phone back please help :crying:
:crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Can you post your method to install cwm
raiso said:
Can you post your method to install cwm
Click to expand...
Click to collapse
i'm confused ... you want to know to install cwm or wanna help me out ?
If the later then thanks , the issue is already fixed .
You have to us kdz to fixed your bricked phone
Sent from my LG-P690 using xda app-developers app
ok so i was using kdz updater to flash my rom on my phone set mode to 3GQCT Phone mode DIAG and my phone is in emergency mode so then i hit launch software update while flashing see some dll msg error's and stuff meanwhile its done and it rebooted my phone then i look at my phone and i see its stuck on lg screen and white flashing screen tried taking out the battery and put it back in no luck tried holding downvolume+home+power still no luck tried flashing again still no luck im using V10F_00.kdz for stock rom btw plz help
Model?
ayman244 said:
ok so i was using kdz updater to flash my rom on my phone set mode to 3GQCT Phone mode DIAG and my phone is in emergency mode so then i hit launch software update while flashing see some dll msg error's and stuff meanwhile its done and it rebooted my phone then i look at my phone and i see its stuck on lg screen and white flashing screen tried taking out the battery and put it back in no luck tried holding downvolume+home+power still no luck tried flashing again still no luck im using V10F_00.kdz for stock rom btw plz help
Click to expand...
Click to collapse
Is it the Dual sim L3-e405 or the singles sime L3-E400?
have you installed the the driver?
try to use phone mode to emergency mode. I forgot all the options since I only have the e405 3 months ago. Hope it helps, and maybe you could try to use OS with higher version, if you are using windows xp be sure it is sp3.
i have lg optimus l3 e400 and im running windows 7 i didnt delete the current rom when i wanted to update is that ok? or bad tried emergency as phone mode didnt work
problem solved it turned out that i didnt pay attention to the rom i downloaded was for e405 so now i downloaded one for e400 and it worked
Hello,
I used following guide to flash install the Original ROM of LG Optimus 3D su760. phone is rooted
http://forum.xda-developers.com/showthread.php?t=1942836
Now the phone cannot detect the IMEI and shows IMEI as blank, no network
I tried several times to try to recover the IMEI of the phone using tutty by typing
at%imei=x,x,x,x,x,x,x,x,x,x,x,x,x,x,x (where x,x,x... is original IMEI)
as in the above thread
every time i got 'IMEI WRITE ERROR' message
pleas help me to solve the problem
Any help?
chaturadilan said:
Any help?
Click to expand...
Click to collapse
Try writing a comma "," in the end.
I mean at%imei=x,x,x,x,x,x,x,x,x,x,x,x,x,x,x,
Instead of at%imei=x,x,x,x,x,x,x,x,x,x,x,x,x,x,x
chaturadilan said:
Hello,
I used following guide to flash install the Original ROM of LG Optimus 3D su760. phone is rooted
http://forum.xda-developers.com/showthread.php?t=1942836
Now the phone cannot detect the IMEI and shows IMEI as blank, no network
I tried several times to try to recover the IMEI of the phone using tutty by typing
at%imei=x,x,x,x,x,x,x,x,x,x,x,x,x,x,x (where x,x,x... is original IMEI)
as in the above thread
every time i got 'IMEI WRITE ERROR' message
pleas help me to solve the problem
Click to expand...
Click to collapse
I've got exactly the same issue, did you found a solution already?
chaturadilan said:
Hello,
I used following guide to flash install the Original ROM of LG Optimus 3D su760. phone is rooted
http://forum.xda-developers.com/showthread.php?t=1942836
Now the phone cannot detect the IMEI and shows IMEI as blank, no network
I tried several times to try to recover the IMEI of the phone using tutty by typing
at%imei=x,x,x,x,x,x,x,x,x,x,x,x,x,x,x (where x,x,x... is original IMEI)
as in the above thread
every time i got 'IMEI WRITE ERROR' message
pleas help me to solve the problem
Click to expand...
Click to collapse
look her http://forum.xda-developers.com/showthread.php?t=1956347
or flash new rom like that http://forum.xda-developers.com/showthread.php?t=2337545
try more times. I have to spam tutty to start properly showing the real ports. First time I tried to write IMEI I got an error, then I got no response at all and the 3rd time a success. Reboot...