Hello all, im new on the forum. I have an Samsung Galaxy note 10.1. Today when i tried to update my firmware from 4.0.4 to 4.1.X the update stopped at 31% and after seeing for some time that it doesnt go i unpluged the cable. After that for some time it was stuck in upgrade mode- doing nothing. In 5-10 mins i got that Firmware upgrade encountered an issue error. It says please select recovery mode in Kies and try again.
Ok so i'm into kies and im trying for 2-3 times to recover my device, and every time it is stuck on 31%.
My device won't boot now / do anything.
I wonder if i need to root / flash something but i dont want to use my warranty. Since im new to rooting /flashing i could use some times and some hands on.
I have the N8000 - 3G version.
Thanks a lot in Advance !
Use Odin not kies. ..
Sent from my GT-I9300 using xda premium
Related
Hi all. need help urgently! i am a noob with xda and all the phones but could not stop my self to try new things out,got a new galaxy 2 phone, only can remember its runs on Official Android 2.3.6 XWKK2 for Samsung Galaxy S2, 4hours ago looking through Xda-developers site and start play with odin, following what it says than noob part of me came in and i some how unplugged usb from the pc.now the phone is stuck at picof phone yellow angle and pc message says some issue happened during upgrade needs from kies to recover try to fix it. try kies it keep saying connect the usb to phone i turn off on the phone it just always come to the same stament some how i got it back to the downloading page and try odin i get fail all the time. what should i do now? please help and thank you all
and now i have fixed it by reinstall the stock so thanks
Crap!!! I hope someone can help me. I was trying to upgrade my son's tablet using odin and a stock 4.04 rom from here :Samsung P5100 / P5110 / P5113 Galaxy Tab 2 10.1 Complete Stock Firmware. The first one for the P5113.
Anyway, everything seemed to be going okay following the directions and then a failed came up in the first box in odin was red. I repeated it and it appeared to be stuck. The tablet was in download mode and the blue line had only progressed about a quarter inch. I heard the usb disconnect and reconnect sound and I tried to initiate it through odin again but the tablet wasn't responding. I stupidly on plugged the tablet and tried to power it down. Now I can't do anything. Can't get into recovery or download mode. The tablet is stuck on the screen and has this message with a picture of a tablet then a yellow triangle and a computer. Here is the message: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. Kies won't recognize the tablet and when I click on emergency firmare recovery it just asks for PC code. I am stumped. I am not familiar with Samsung at all. Also, the message on the screen won't disappear. If I hold down power it won't turn off, the screen will go black and then the message will come right back so I'm afraid the battery will be dead soon and then I will be totally out of luck.
The tablet is a wifi only P5113 Tab 2 10.1.
http://support.t-mobile.com/docs/DOC-4484
Not your device but its should be similar. Hope it works for you.
No luck so far, is there no way to get past this screen?
Not that I know of to be honest, You need to get into download/recovery .... Hopefully someone else more knowledgeable will come up with something !
How old is the tab ?
EDIT :
Will ODIN connect ... When you get that firmware error screen ?
Sean_Seany said:
Not that I know of to be honest, You need to get into download/recovery .... Hopefully someone else more knowledgeable will come up with something !
How old is the tab ?
EDIT :
Will ODIN connect ... When you get that firmware error screen ?
Click to expand...
Click to collapse
No nothing, windows does recognize it and will install the driver. But Odin doesn't show anything happening and Kies just shows connecting. When you select emergency recovery in Kies it will stop trying to connect and bring up a dialog box asking for a recovery code. Apparently if the failure would have happened during a legit upgrade using Kies it would have generated an error code for recovery. Is there no way to repair this? Thought Samsung devices were suppose to be so easy to customize? Please help my son is pretty pissed.
Sent from my icrap 2 using Tapatalk HD
Update!!!
I was able to get odin to connect to tablet and I got cwm recovery installed so it no longer boots to the failed firmware screen and I can get into recovery. My question is which firmware do I install?? The tablet is a Galaxy Tab 2 10.1 P5113 wifi only. Is the P5113UEBLH3 firmware the correct one? It says it was provided by Cellular South which confuses me since the tablet is wifi only.
Update 2!!!!!!!!!!!!!!!!!!
Success!!! Got into download mode and was able to load the stock 4.04 firmware and life is good again. Thanks to all that helped.
One thing. Always update your table with OTA or Kies. ODIN breaks the warrantie
Sent from my GT-P3110 using xda premium
Sweeeet ! Well played :good::good::good::good:
Same issue, different solution...
cruise350 said:
Update!!!
I was able to get odin to connect to tablet and I got cwm recovery installed so it no longer boots to the failed firmware screen and I can get into recovery. My question is which firmware do I install?? The tablet is a Galaxy Tab 2 10.1 P5113 wifi only. Is the P5113UEBLH3 firmware the correct one? It says it was provided by Cellular South which confuses me since the tablet is wifi only.
Update 2!!!!!!!!!!!!!!!!!!
Success!!! Got into download mode and was able to load the stock 4.04 firmware and life is good again. Thanks to all that helped.
Click to expand...
Click to collapse
I bricked my device from Odin while trying to revert from a CM10.1 nightly to stock JB. Device picked up in Odin, but would not flash... unless I reboot the device after I clicked start in Odin. Dunno why, but it loaded stock firmware on the error screen... don' ask me how...
I have experienced this. Run ODIN, then connect your devices to the computer. When ODIN detect it, unplug and then replug your device. When ODIN back detect it then flash.
Recent versions of Odin work the other way around. First plug then open. Older like <1.87, first you open the program then you plug device. Glad it got solved.
Sent from my HTC One VX using xda premium
I have also hit this screen several times while playing with roms, this is a fairly common example of "softbrick". Fortunately for me, Odin had no problems connecting, and then simply flashed an oem rom. I have not been able to hard brick this thing, which is a huge surprise considering all the flashing I've done. Frankly I'm surprised it hasn't blown up like an iraqi IED yet lol!
This is a good thing! It means that Samsung built in a good failsafe. It just means you hosed your rom install all the way down to the bootloader. Easy to recover from
Glad ya learned to fix it!
Big problems with my Samsung Galaxy Tab 2 10.1
cruise350 said:
Crap!!! I hope someone can help me. I was trying to upgrade my son's tablet using odin and a stock 4.04 rom from here :Samsung P5100 / P5110 / P5113 Galaxy Tab 2 10.1 Complete Stock Firmware. The first one for the P5113.
Anyway, everything seemed to be going okay following the directions and then a failed came up in the first box in odin was red. I repeated it and it appeared to be stuck. The tablet was in download mode and the blue line had only progressed about a quarter inch. I heard the usb disconnect and reconnect sound and I tried to initiate it through odin again but the tablet wasn't responding. I stupidly on plugged the tablet and tried to power it down. Now I can't do anything. Can't get into recovery or download mode. The tablet is stuck on the screen and has this message with a picture of a tablet then a yellow triangle and a computer. Here is the message: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. Kies won't recognize the tablet and when I click on emergency firmare recovery it just asks for PC code. I am stumped. I am not familiar with Samsung at all. Also, the message on the screen won't disappear. If I hold down power it won't turn off, the screen will go black and then the message will come right back so I'm afraid the battery will be dead soon and then I will be totally out of luck.
The tablet is a wifi only P5113 Tab 2 10.1.
Click to expand...
Click to collapse
Hi, my problem is identical. I have a samsung galaxy tab 2 10.1 and after a failed update with Odin the message was:Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. I try again with Odin and nothing. I used Kies, and nothing. Then i saw a reference to the md5 philz_touch_5.03.7-p5110.tar.md5 and i use it with Odin. Sucess but the message was RESET. Everithing disappeared from screen except the battery logo. The tablet is always on and with that image. The volume buttons and power don't work and it is not detected.
I'm affraid the thing is bad.
Can you help? Thank you.
Djadomor
Hey cruise, would you happen to still have the file you used on your son's box? The only page I can find won't let me in.
Hello,
I just updated the firmware of my brand new Note 10.1 (N8000) using Kies, which seems to have failed - I can't even turn the device off. I'm a quite experienced computer user, but brand new to Android. Any help or feedback would be very much appreciated (esp. how I can at least turn off the device).
Problem Description:
I have a new Note 10.1 (a German device/I'm in Germany using the Vodafone network, but I guess that shouldn't matter) and installed Kies today. The application identified a new firmware and suggested an update, which I did via USB. Everything appeared to have gone all right - the file got downloaded, transferred to the device, which then showed that it was installing the updates (something like 95 items). No error message. The device then booted, and that's where it seems to be stuck: since then, the device is in an endless loop: Screen is black, a swirling animation comes up, than the Samsung Logo, which stays for like 12 seconds, the screen goes black and it starts from the beginning (in total the loop takes like 15 secondes). Kies cannot connect to the device, and I can't even turn it off, it's just stuck in this endless loop.
Before the update, the device was neither modified nor rooted (I only installed a few apps), and there was no error message during the update (at least none that I saw).
Can anyone help???
Get the firmware file from sammobile and flash with odin. You can find a lot of how to regarding Odin, just do a search and you will find a movie or tutorial.
Here is the fw
http://www.hotfile.com/dl/178817278/616d7ef/N8000XXBLJ9_N8000OXABLJ9_DBT.zip.html
The link is from sammobile, not a mirror, so it's safe.
Or you could just return it for an exchange.
Sent from my GT-N8010 using Tapatalk 2
To turn off, just press power until it turns off (about 10 seconds)...
Kies firmware failed N8010
ultramag69 said:
To turn off, just press power until it turns off (about 10 seconds)...
Click to expand...
Click to collapse
Hi there, I have the same problem but with N8010, after firmware update witch FAILED , my N8010 shows .... Firmwareas encountered an issue , Try to recover with Kies...
No way to recover with Kies, I've tryied with Odin flashing the original firmware Ics 404 " Odin flash PASSED, N8010 restart after flashing first start " Samsung note 10.1.. " but no going further it statck ther, I flashed again in Odin Jb 4.1.2 ... Odin Pass, N8010 reboot , Samsung note 10.1 go further Sound and Samsung logo come up but it stack there, I can not turn my N8010 off, if I push the Power botton it reboot again and stack after the souns and Samsung logo!!!
I can enter in Download mode for flashing again but can not get my N8010 further , Please HELP!! " dont know what to do .
ThankYou in advantage
Greetings
Joey
EagleTalon1 said:
Hi there, I have the same problem but with N8010, after firmware update witch FAILED , my N8010 shows .... Firmwareas encountered an issue , Try to recover with Kies...
No way to recover with Kies, I've tryied with Odin flashing the original firmware Ics 404 " Odin flash PASSED, N8010 restart after flashing first start " Samsung note 10.1.. " but no going further it statck ther, I flashed again in Odin Jb 4.1.2 ... Odin Pass, N8010 reboot , Samsung note 10.1 go further Sound and Samsung logo come up but it stack there, I can not turn my N8010 off, if I push the Power botton it reboot again and stack after the souns and Samsung logo!!!
I can enter in Download mode for flashing again but can not get my N8010 further , Please HELP!! " dont know what to do .
ThankYou in advantage
Greetings
Joey
Click to expand...
Click to collapse
I'm having the same issue!!!!!
Kies failed! Odin PASS and stuck in the logo!, it doesnt boot!
You may need to go into recovery and wipe data/cache partition. This will wipe your internal memory of everything but you will get an operational note...
Hi guys!
I need urgent help...
Some days ago I tried to root my Galaxy Note 10.1 GT-N8010 to install an upgrade from GT-N8000...
Yes, stupid of me...
It all went weel, but sometime after I tried to unroot and go back to Stock Android 4.1.2.. Bfirecause I'm far from being an expert, something went wrong... first I tried with Odin, and nothing... After that with Heimdall and I managed to install the GT-N8010 4.1.2. but lost touch control...only worked with S-Pen. (maybe because when I enter Download Mode it still apears as a GT-N8000)
Resuming...now it stopped working...it stops in the "Galaxy Note 10.1" startup screen, and doesnt even go to the Samsung logo...
Cant even enter recovery mode, only download mode.
Today I went to Samsung Assistance and they told me that if it was rooted I would have to change the motherboard wich would cost around 250-300€!!!
So...I am asking if there is a good soul who can hel me solve this serious problem...is it possible to revive my Note 10.1?
Thanks in advance!
Bernardo
I searched most of the web for a week now, trying to figure out how to fix my Tablet on this nightmare.
so before it all began, i left my Tablet charging in midnight, left it in stand-by mode for 12 hours (yes i slept for 12 hours). when i woke up, it was on shutdown mode. i don't know why, i tried opening it, but it was stuck on Samsung Logo for nearly 2 mins. then i tried re-restart it again, and then i was stuck on "Samsung Galaxy tab 2 7.0". I can charge my Tab and it only has 80% battery for some reason. and so i asked someone from Yahoo Ask about how to fix this problem, i couldn't go to Recovery mode or start my tab, but everytime i try, it'll only get stuck at "Samsung Galaxy tab 2 7.0". Now, this guy said i should download a custom os or firmware or smth. (Forgot). and then i downloaded Odin, and a Firmware. for my GT-P3100.
I know i made a mistake, since i wanted to already fix my problem, i went to try anything i didn't actually know of. Now i have a problem, I didn't listen to "Don't turn off target" thing, and i shutdown my tab in the middle of using Odin, since most of the tries failed, Now i got the Firmware upgrade encountered an Issue.
I Tried using Samsung Kies to fix the issue, but it'll only get stuck on Connecting... i tried reinstalling the Drivers but nothing happened, then i uninstalled Kies. and then i download firmwares that might help me with my problem. but most of them failed.
i have 2 Firmware Stock for GT-P3100 Philippines. I really want to get my tab fixed already without a technician repairing it for me. so can you guys help?
I'm about to Download and try Jellybean Firmware, I Don't know anything about this problem nor these firmware. since i couldn't connect to Kies, i only tried fixing it on Odin.
Most of the Firmwares i tried failed. and every time i want to find some thread with the same problem as mine, i couldn't find anything.
i tried everything and it still wont work.
HELP!
._. It happened to me when i deleted System using the recovery mode e.e You should call samsung or buy another tablet ~i have 1 p3100~
Sent from my SM-G800H using XDA Free mobile app
Eddy_0205 said:
._. It happened to me when i deleted System using the recovery mode e.e You should call samsung or buy another tablet ~i have 1 p3100~
Sent from my SM-G800H using XDA Free mobile app
Click to expand...
Click to collapse
if i ran out of options, i have no choice but to get it fixed by some pro. i don't really know how it happened to my tablet : (
............................
HELP
Can someone help me, because I have a tab same isseu
I have GT-P3100 SamsungTab 2 (7''). Due to some reason its unable to boot normal and stuck at bootup logo.I try open recovery mode but fail.
I open download mode and try update firmware by ODIN3. But fail as USB and set disconnected in middle. After that phone unable to boot in download or recovery mode and always shows "Firmware upgrade encountered an issue. Please select recovery mode in kies & try again."
I tried again with ODIN but unable to flash firmware. Tried CWM & firmware MD5 files but all fail. On ODIN3 (3.07) it shows success in tool but actually no impact on set. When try with ODIN3 (1.85) it saying fail to write NAND.
Is any way i can correct my Tablet?
Any suggestion will be welcomed.
Thanks in advance
Umamkgf