Replacement parts for photon q - Motorola Photon Q 4G LTE

I'm be looking for a replacement part for my Photon Q: it has dropped and the external plastic, the one around the screen section, got scratched. NOT the screen, just the rectangular plastic around the phone. I would need to buy a genuine replacement, cheap, if possible, for it.
I will be buying the Otterbox Commuter also, since I don't want it to get in bad cosmetical state so quickly, again.
Thanks for the help
Tony

Any help?

Other than the obvious - ebay and the like... I am not aware of any place that specifically sells hardware like that.
Good luck.

See here http://www.etradesupply.com/motorola/android-models/motorola-photon-q-4g-lte-xt897.html

Wow, that's actually really helpful, thanks, I was looking for a something like this a while ago, just so I can experiment with the phone.
Thanks again.

Related

Touch Diamond Replacement Housing!! Help!!!!

I just dropped my diamond by accident while running to my car to avoid the rain =="....
It was in a PDA case, but it still somehow popped out of the case and got scratched up...
So I am in DIRE NEED OF A REPLACEMENT HOUSING!!!
lucky for me, the only damaged parts were the metal rim around the front side of the phone and the battery cover...
I am thinking of just getting an extended battery so i can get a new battery cover with it as well.
But I can't find the Replacement part for the rim around the front of the phone...
I took a lot at the phone and it seems easy enough to replace the rim....but i need to find the part first....
Please guys, any help will be very much appreciated....
Really need this housing replacement...can't stand looking at my scratched up diamond =(
phones still in its early stages so gonna be hard to get hold of housing so quick. Usually best place is here
http://cnn.cn/shop/touch-diamond-c-277_533.html
but they only have screen and back plate at the moment
just be patient a little bit longer.
does that shop deliver quickly??
would it be possible to ask for oem parts directly from htc...?
i talked it over with htc canada today and it may cost upwards 100 CDN to fix the cosmetic damage =(
no insurance?
uh no...i've never insured a phone before....
never thought it would the belt clip would break and let the phone fall and get scratched =="
argh...
any ideas on what to do...
should just take out the rim and touch it up myself ^^"....
oh i've got an idea =D!!!!
I can buy a dummy phone and replace it directly that way...
right.....?
pizzachips said:
oh i've got an idea =D!!!!
I can buy a dummy phone and replace it directly that way...
right.....?
Click to expand...
Click to collapse
In a very rare occasion you can use dummy phones.
Mostly the inside is completely different, no way of using those dummies for housing parts.
Haven't seen a dummy Diamond yet, so I can't tell if it is usable, but mostly HTC dummies aren't usable.
the-equinoxe said:
In a very rare occasion you can use dummy phones.
Mostly the inside is completely different, no way of using those dummies for housing parts.
Haven't seen a dummy Diamond yet, so I can't tell if it is usable, but mostly HTC dummies aren't usable.
Click to expand...
Click to collapse
i'm just lokoing to replace the outer rim on the front side of the phone and the battery cover....?
so maybe its possible...
ill drop by a local mall and see if its possible i guess....
loads of dummy diamond phones on ebay the last time i check it out.
i wouldn't say loads...
i saw a total of 4 =P lol
average 20-30 dollars CDN
which is fine for me if i can use it as housing and battery cover replacement
anyways heading out to check the dummy model =)
it doesn't work =(
its one giant piece, so i can't really take it apart to replace the piece i want...
How hard is it to take apart the diamond?
The invisible shield really stuffed up my screen. I can see parts flaked off the screen (looks like a thin protection layer) which is believe is the touch sensor itself. It has not affected the use of the phone but looks ugly.
EDIT: Home from work and did a search and found this: http://www.pdacenter.ru/razborka/razbor-htc-touch-diamond/
Looks like a lot of work to get to the digitizer.
wow amazing find...was looking for a page like this...
aw man...the housing is one whole piece from what i can tell from the last picture...guess a DIY housing replacement is not really gonna be easy....
i'm gonna ask HTC for an estimate....
just minor cosmetic damage on mine on the corners so nothing too huge but it pains me to see it every time =(
at least this seems a bit easier than fixing the iphone....its so much work to put in a new digitizer cause of the way the housing is built
Looking for the Telus Black rear cover
If anyone finds a place that is selling the black rear battery cover for the CDMA version of the phone i would be interested.
anyone have any lucking finding a replacement housing?
I can provide the replacement housing
It cost about 36 euro
Like this??
http://cgi.ebay.it/ws/eBayISAPI.dll?ViewItem&item=350260913226&ssPageName=STRK:MEWAX:IT

Do not Buy Xentris Snap on Case for Epic

I bought the case the same day I got my phone. I removed the case today to remove dust from under the case and notices that the sides of my Epic were scratched by the case
Thank you for the tip. Have you gotten a replacement for it yet?
Pops_G said:
Thank you for the tip. Have you gotten a replacement for it yet?
Click to expand...
Click to collapse
Not yet. I sent Xentris an email but they haven't replied yet. I'm sure if I complained to Best Buy about it they'd give me a new phone but I don't know if I will. I wish they made a case that was lined with silicone on the inside for the Epic.
This seems to be a common problem for the Epic hard cases. I'm not a fan of hard cases just because of the bulk, but it's good to know they are messing them up.
Kcarpenter said:
This seems to be a common problem for the Epic hard cases. I'm not a fan of hard cases just because of the bulk, but it's good to know they are messing them up.
Click to expand...
Click to collapse
I'm not a fan of hard cases either, I prefer silicone cases, but since the Epic is a sliding phone all we get are hard cases
cant stand hard cases either....for now until i find the right case (i swear its taking longer to find that than my last car). All im using for now is a bag that i got with a pair of oakleys from sunglass hut. scratch protection....better than nothing. every other type of potential hazzard.....its a nightmare!
do they make a case that does not allow the phone to slide? may sound terribly stupid, but my gf does not really need the physical keyboard...
just curious.
flame on
I tried the Verizon gel case at Best Buy, not great, because I don't want the slider either.
Next stop is cheap kiosk at mall, the Verizon phone has same rounded corner
and shape, just thinner, so something might be workable.
different camera placement though
i had the red case way too hard to remove so i returned it and am getting a phantomzkinz instead
churro7 said:
different camera placement though
i had the red case way too hard to remove so i returned it and am getting a phantomzkinz instead
Click to expand...
Click to collapse
I had the same problem with the one sold buy Best Buy (Sedio) and I just ordered a Phantomskinz.
Just wanted to post an update, Xentris never replied to my email.
Xentris Snap on cover for Epic 3G
I was in love with this case-that is until the matte paint started peeling after only 30 days. It will do until it bugs me so bad I have to fork out the cash for a Seidio case. Don't bother. I guess it was better than carrying it out without protection but stay away from it-it's cheap crap
I emailed them-lets see where it gets me
rockethot said:
I'm not a fan of hard cases either, I prefer silicone cases, but since the Epic is a sliding phone all we get are hard cases
Click to expand...
Click to collapse
While on ebay I saw this. I haven't seen any reviews of it though.
http://cgi.ebay.com/Black-Silicone-...emZ400167973134QQcategoryZ20336QQcmdZViewItem
Yeah i have the best buy case also (think its the xnetris), and its a total POS. rubber is all peeling off and the front snap on part has scratched the phone. pretty pissed...
keekah said:
While on ebay I saw this. I haven't seen any reviews of it though.
http://cgi.ebay.com/Black-Silicone-...emZ400167973134QQcategoryZ20336QQcmdZViewItem
Click to expand...
Click to collapse
It's a fugly piece of crap, don't buy it. Thanks to Viper786 there is a review and pictures here.
I had the $20 hard case that sprint sells on mine for like 2 months.. recently took it off to notice the marks on my epic.. i got the case to keep it mint and it essentially left a etching around my phone. I thought about yelling at sprint but not sure if they would replace or send off for repair... I also didnt buy the insurance and its been over 30days so wasn't sure how that would all pan out. Might head up there tomorrow and see what they say.
BopChie said:
I had the $20 hard case that sprint sells on mine for like 2 months.. recently took it off to notice the marks on my epic.. i got the case to keep it mint and it essentially left a etching around my phone. I thought about yelling at sprint but not sure if they would replace or send off for repair... I also didnt buy the insurance and its been over 30days so wasn't sure how that would all pan out. Might head up there tomorrow and see what they say.
Click to expand...
Click to collapse
That blows. I bought that case today and I actually really like it. Not too bulky and has a nice grip. I also like the rubbery weave on the back. Now reading this makes me concerned. It seems like it is designed the same way as Seidio cases and I never had that issue with them. I may return it for Seidio then. Bummer.
gorby911 said:
That blows. I bought that case today and I actually really like it. Not too bulky and has a nice grip. I also like the rubbery weave on the back. Now reading this makes me concerned. It seems like it is designed the same way as Seidio cases and I never had that issue with them. I may return it for Seidio then. Bummer.
Click to expand...
Click to collapse
yeah i liked it for the same reason and liked it up to a week ago whe i took it off.. i figured it was just me with a random issue.. i.e sand in pocked from fishing over the summer or something... i still like it but kinda like the feel with it off too.. i'll live with it either way... but if they replace it i might look into some sort of silicone hugger or vinyl wrap.
well amazon does have the xmatrix case for epic 4g and the build quality is the best i have seen for the epic...there is no interference or friction from the keyboard ...plus it has two layers like the otterbox cases one silicone and one soft touch plastic....based on the quality of this case, they could be charging otterbox prices and this would still be a good deal....stay tuned, i will be creating a new post with pics in a few minutes

Dropped my phone on concrete :(

And now the pristine MAO case has some horrendous chips and scratches, and I'm really pissed off.
I can't seem to find a reliable or legit looking seller on eBay that will sell a genuine MAO case, the new bevelled USB version. I'm based in the UK, but wouldn't mind buying from an international seller that ships to the UK also. Does anyone know of any good eBay sellers selling genuine HTC parts?
Failing that, does anyone know roughly how much it would cost if I were to send it back to HTC to replace it? I asked HTC support but they don't sell spare parts and can't give a quote unless I send the phone first. Any estimate would be great.
Thanks.
Anybody..?
djsubtronic said:
Anybody..?
Click to expand...
Click to collapse
I'd say you're pretty lucky the screen is intact. Get some black nail polish and fill in the chips, then put one of the super thin cases/skins on it.
el_smurfo said:
I'd say you're pretty lucky the screen is intact. Get some black nail polish and fill in the chips, then put one of the super thin cases/skins on it.
Click to expand...
Click to collapse
The chips are pretty bad. Nail polish is gonna look hideous. Plus the whole point of this phone was to not put it in a case. I'm usually very careful with dropping a phone, this is the first time it's ever happened in my life.
I think I'm just gonna buy a housing off eBay and replace it. And if the housing turns out to be crap (even though they assure it is genuine) then next step would be to insure it and then make a claim.
Hi,
I got a MAO back cover from here: http://www.parts4repair.com/htc-one-s-back-cover/
I asked by e-mail and they say it's an original HTC repair part. I received and replaced the cover and it is indeed indistinguishable from the original. I don't know how it will hold out over time, though.
Before ordering the back cover, I asked an authorized HTC repair service in Switzerland about the repair cost; they said 59 CHF for the cover + labor costs. Like in your case, they cannot estimate labor costs without seeing the phone.
I replaced the back cover myself. It is not that difficult, but you lose warranty (there is a VOID sticker you need to puncture). Be careful that the MAO back cover is structurally different from the gray one: under the lower plastic "flap", there is another black plastic piece that needs to be removed before you can pull the phone from the back cover (first unscrew the two black cross-type screws, then pull out the plastic piece).
Good luck!
doartest said:
Hi,
I got a MAO back cover from here: http://www.parts4repair.com/htc-one-s-back-cover/
I asked by e-mail and they say it's an original HTC repair part. I received and replaced the cover and it is indeed indistinguishable from the original. I don't know how it will hold out over time, though.
Before ordering the back cover, I asked an authorized HTC repair service in Switzerland about the repair cost; they said 59 CHF for the cover + labor costs. Like in your case, they cannot estimate labor costs without seeing the phone.
I replaced the back cover myself. It is not that difficult, but you lose warranty (there is a VOID sticker you need to puncture). Be careful that the MAO back cover is structurally different from the gray one: under the lower plastic "flap", there is another black plastic piece that needs to be removed before you can pull the phone from the back cover (first unscrew the two black cross-type screws, then pull out the plastic piece).
Good luck!
Click to expand...
Click to collapse
Thanks, I knew the difference between the black and gray ones and since mine is black I just want to fix the fact that it's chipped. I'm comfortable with replacing it myself so I might just get it from the website you linked. I just have one question though, can you notice on the replacement cover you ordered whether it has the "new style" beveled USB port? I only want to bother replacing it if it has that USB bevel which indicates it won't have the chipping issue. Other than that, how long have you had it and have you noticed any chipping?
I'd probably fix it myself, it will save money and also won't have to be without a phone.
djsubtronic said:
Thanks, I knew the difference between the black and gray ones and since mine is black I just want to fix the fact that it's chipped. I'm comfortable with replacing it myself so I might just get it from the website you linked. I just have one question though, can you notice on the replacement cover you ordered whether it has the "new style" beveled USB port? I only want to bother replacing it if it has that USB bevel which indicates it won't have the chipping issue. Other than that, how long have you had it and have you noticed any chipping?
I'd probably fix it myself, it will save money and also won't have to be without a phone.
Click to expand...
Click to collapse
I only used it for ~1 week.
Unfortunately, I didn't know about the bevel and did not check. I don't have the phone anymore (it was the S3 version, I sold it and got an S4). If your eyes are better than mine, try looking at these photos:
https://www.dropbox.com/s/u1kq1gdfdrq3zhj/Untitled.jpg
https://www.dropbox.com/s/wmmrv0kgmrmglyr/full.png
I would say that it does not have the bevel, but the quality is not that good. I don't have the full resolution photos either.
doartest said:
I only used it for ~1 week.
Unfortunately, I didn't know about the bevel and did not check. I don't have the phone anymore (it was the S3 version, I sold it and got an S4). If your eyes are better than mine, try looking at these photos:
https://www.dropbox.com/s/u1kq1gdfdrq3zhj/Untitled.jpg
https://www.dropbox.com/s/wmmrv0kgmrmglyr/full.png
I would say that it does not have the bevel, but the quality is not that good. I don't have the full resolution photos either.
Click to expand...
Click to collapse
Ahhh yea those pics are crap. Thanks for your help anyway. I'll think it over and see what I should do.
Just thought I'd let people know. I ordered a case from no.1-tech on ebay (Hong Kong based). Only 20 GBP (including postage) and 12 calendar days later, the case arrived. And at the expense of voiding my warranty, I went ahead to swap the case myself at home. It was a lot easier than expected to do.
So far so good. Seems like a genuine part, but best of all, and much to my surprise, it is the newer beveled USB design as well. Either that or a really incredible fake. Part number matched exactly on the case I removed and it had a date stamp also.
All in all, my phone is now brand new again, with the exception of a small chip that I got on the actual plastic portion around the screen. Not much I can do about that short of getting a whole new digitizer which unfortunately only comes bundled with a screen too. Can't justify 100 GBP to fix a tiny chip on the plastic lol.
djsubtronic said:
Just thought I'd let people know. I ordered a case from no.1-tech on ebay (Hong Kong based). Only 20 GBP (including postage) and 12 calendar days later, the case arrived. And at the expense of voiding my warranty, I went ahead to swap the case myself at home. It was a lot easier than expected to do.
So far so good. Seems like a genuine part, but best of all, and much to my surprise, it is the newer beveled USB design as well. Either that or a really incredible fake. Part number matched exactly on the case I removed and it had a date stamp also.
All in all, my phone is now brand new again, with the exception of a small chip that I got on the actual plastic portion around the screen. Not much I can do about that short of getting a whole new digitizer which unfortunately only comes bundled with a screen too. Can't justify 100 GBP to fix a tiny chip on the plastic lol.
Click to expand...
Click to collapse
could you please post a link of the eBay page where you got the housing? am looking to replace mine also. thanks
Sent from my HTC One S using xda premium
djsubtronic said:
Just thought I'd let people know. I ordered a case from no.1-tech on ebay (Hong Kong based). Only 20 GBP (including postage) and 12 calendar days later, the case arrived. And at the expense of voiding my warranty, I went ahead to swap the case myself at home. It was a lot easier than expected to do.
So far so good. Seems like a genuine part, but best of all, and much to my surprise, it is the newer beveled USB design as well. Either that or a really incredible fake. Part number matched exactly on the case I removed and it had a date stamp also.
All in all, my phone is now brand new again, with the exception of a small chip that I got on the actual plastic portion around the screen. Not much I can do about that short of getting a whole new digitizer which unfortunately only comes bundled with a screen too. Can't justify 100 GBP to fix a tiny chip on the plastic lol.
Click to expand...
Click to collapse
Nice work. Does the disassembly require pry tools (which I suck at) or is it all just screws?
djsubtronic said:
Just thought I'd let people know. I ordered a case from no.1-tech on ebay (Hong Kong based). Only 20 GBP (including postage) and 12 calendar days later, the case arrived. And at the expense of voiding my warranty, I went ahead to swap the case myself at home. It was a lot easier than expected to do.
So far so good. Seems like a genuine part, but best of all, and much to my surprise, it is the newer beveled USB design as well. Either that or a really incredible fake. Part number matched exactly on the case I removed and it had a date stamp also.
All in all, my phone is now brand new again, with the exception of a small chip that I got on the actual plastic portion around the screen. Not much I can do about that short of getting a whole new digitizer which unfortunately only comes bundled with a screen too. Can't justify 100 GBP to fix a tiny chip on the plastic lol.
Click to expand...
Click to collapse
Thanks for sharing your experience with everyone. I wonder how you even started removing the case, since it has no visible screws. I suppose there are videos out there with instructions.
evilRafael said:
Thanks for sharing your experience with everyone. I wonder how you even started removing the case, since it has no visible screws. I suppose there are videos out there with instructions.
Click to expand...
Click to collapse
Pop your plastic covers for starters.
dr_rick13 said:
could you please post a link of the eBay page where you got the housing? am looking to replace mine also. thanks
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
Here's the ebay link:
http://www.ebay.co.uk/itm/Metal-Fra...t=LH_DefaultDomain_0&var=&hash=item2a1ece2c79
Make sure you select the right option from the dropdown. The Europe based S4 black model is "A".
el_smurfo said:
Nice work. Does the disassembly require pry tools (which I suck at) or is it all just screws?
Click to expand...
Click to collapse
For just the case you can get by without pry tools. You need a T5 torx and a small phillips screwdriver. Once you have the 4 screws removed, apply some pressure on the inner phone assembly that is exposed at the bottom, you basicaly want to push it outwards towards the face of the phone. Obviously be careful with the pushing. It should easily give way as I found it isn't really glued into the housing. You might need a credit card or something to help you ease it out once you have made room with the pushing. I hate pry tools too and had no problem doing it this way. The one thing to be careful about is the plastic assembly at the bottom. Take a good look at how it fits in, so you don't mess it up when putting it back together.
By the way, you can buy HTC void stickers too:
http://www.ebay.co.uk/itm/8-VOID-WA...K_Replacement_Parts_Tools&hash=item337c0261f7
If I ever do need to send it back to HTC under warranty I'm sure those would do the trick
djsubtronic said:
Here's the ebay link:
http://www.ebay.co.uk/itm/Metal-Fra...t=LH_DefaultDomain_0&var=&hash=item2a1ece2c79
Make sure you select the right option from the dropdown. The Europe based S4 black model is "A".
For just the case you can get by without pry tools. You need a T5 torx and a small phillips screwdriver. Once you have the 4 screws removed, apply some pressure on the inner phone assembly that is exposed at the bottom, you basicaly want to push it outwards towards the face of the phone. Obviously be careful with the pushing. It should easily give way as I found it isn't really glued into the housing. You might need a credit card or something to help you ease it out once you have made room with the pushing. I hate pry tools too and had no problem doing it this way. The one thing to be careful about is the plastic assembly at the bottom. Take a good look at how it fits in, so you don't mess it up when putting it back together.
Click to expand...
Click to collapse
how does the lower cover pop off...straight out, like the top?
el_smurfo said:
how does the lower cover pop off...straight out, like the top?
Click to expand...
Click to collapse
I'm really wondering about this also how to take off the bottom cover.. also smurf I have a question for you. It seems like the top contains the WiFi prong. Are you sure the one for cellular signal is on the bottom?
Sent from my HTC One S using xda premium
ickedmel said:
I'm really wondering about this also how to take off the bottom cover.. also smurf I have a question for you. It seems like the top contains the WiFi prong. Are you sure the one for cellular signal is on the bottom?
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
It almost always is for regulatory reasons (less radiation in the dummy head) even though it makes for less signal when "you're holding it wrong". There's an anandtech review showing the antenna placement as well.
el_smurfo said:
how does the lower cover pop off...straight out, like the top?
Click to expand...
Click to collapse
ickedmel said:
I'm really wondering about this also how to take off the bottom cover.. also smurf I have a question for you. It seems like the top contains the WiFi prong. Are you sure the one for cellular signal is on the bottom?
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
Well for me I slowly pried the gap at the bottom edge. It's got adhesive on the inside sticking it onto that plastic assembly I mentioned earlier, but just keep prying it slowly so the adhesive doesn't get all messed up. It should flip open like a door with the hinges being where the beats logo is, eventually it'll open right out then just pop it out.
Hi guys,
I got similar story and want to replace my housing.
I have the EU S4 black/red model. I think its one of those with the chipping issue, but not much damage, until the drop which cut the top corner to straight 45 degree white line and scratches my finger every time I use it in landscape mode.
Anyway wanted to ask, since you already tried/used it for some time.
Is the eBay one genuine or just a good fake?
Or is the one from parts4repair a better choice?
Also after removing the bottom plastic cover, as I understand it has glue to it to keep it in place. Do I need to replace that on the reassembly or just heating it back and pressing will work with the old one? Or it has something else to keep it in place other than the glue?

Ecell "Genuine" Black Replacement Housing

I've been looking around for a replacement housing for my G2, it's pretty knocked up (bought it 2nd hand), had a look at faulty used phones and official replacement housing, but both are surprisingly expensive (you wouldn't believe how much people pay for an old waterdamaged phone with an unrepairable screen and dents left right and centre.
Anyway, I've seen a full housing (minus screen/ glass) by Ecell which is (quote) "New Genuine ... For HTC Desire Z", previously it was £300ish on eBay, I've now seen it for under a tenner (still direct from Ecell).
Thing is it's black, so the use of the word "genuine" is questionable (do they mean "genuine" Ecell, or "genuine" HTC?), although in the description they say "Official HTC product". Also I've never bought anything Ecell before.
I just wanted to know if any of you guys have bought one of these replacement housings, or anything from Ecell before? Feedback would be greatly appreciated .
Best I have found is about 40$ for a full housing replacement OEM, if considered it the past but haven't been able to justify that just for aesthetics. I recently stopped using my dock and just use one of the original T-Mobile cases I fond for a few bucks (thick rubber, bulky but real nice) since then I gave up on pretty.
Never bought from ecell before so I couldn't attest to their reputation
Sent from my Nexus 7 using xda premium
I've seen the E-CELL product on eBay for about 10 pounds and it seems a good price for it.
However, while I'm not sure of its' quality, for that value I'd be willing to take a risk and see what's it about.
@demkantor Thanks, according to Google $40 = £25, and official HTC housing goes for around £30, which is absurd 'cause that's well over half of what I paid for my G2. I don't fancy a case, the Vision is already thick and heavy without one (can you even use the keyboard with a case on? )
@geojoking Yep, that's the one I found, previously £300 (wtf?!). Unless anyone highly cautions against Ecell I might go for it, besides as you say it is less than £10 so probably worth the risk. Anyway, if I do get it I can post a review here !
you can slide it fine, i would prefer not to use one but im running low on spare phones at the moment and i dont mind the bulk, but yes definitely bulkier!
i believe the original leaked photos of the g2/dz were of a black model or at least real dark grey. supposedly there is some mystic black version that is near impossible to get a hold of with a different bootloader then all the others, it had a different name but fell under the vision still i believe... cant remember much about it
so that would mean its possible these are genuine and being they were once 300 that may mean that ecell had them since the very beginning as when phones first come out parts like this tend to cost more than a new phone! they could have gotten the original casting and colors prerelease to the public... just a thought
either way for that price go for it, if it turns out not to fit not a huge loss, if it works great then you have one of the few(if any) black visions!
i would suggest getting some 3m adhesive tape (2mm?) as moving the digitizer will require this as well as holding down the flex. let me know how it turns out! maybe ill try it myself
I saw these a while back, almost bought it but was sceptical of the quality. Really wish I did now..

Replacement back cover

To keep it short and simple, I noticed a crack in the back of my tablet today (and I'm not even sure how it got there) so I'm looking to purchase a new cover to replace on my own.
So far, I haven't had much luck; I've only found a handful of eBay listings that are selling used ones for far too much.
Could anyone point me in the right direction?
Not likely to find a parts depot for this device given relative newness and low price point. Probably more cost effective to apply packing/Gorilla tape to the underside or invest in a slim case.
Davey126 said:
Not likely to find a parts depot for this device given relative newness and low price point. Probably more cost effective to apply packing/Gorilla tape to the underside or invest in a slim case.
Click to expand...
Click to collapse
Hi Davey, it's been a long time. Hope you're holding up okay.
I did end up going with one of the eBay sellers and the repair turned out great:
http://www.ebay.com/itm/252243326062?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
The back cover easily snaps off using a guitar pick, plastic tweezers, etc.
The listing says that it doesn't come with buttons, but mine did; either way, taking them off the old one is a breeze as well.
EncryptedCurse said:
Hi Davey, it's been a long time. Hope you're holding up okay.
I did end up going with one of the eBay sellers and the repair turned out great:
http://www.ebay.com/itm/252243326062?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
The back cover easily snaps off using a guitar pick, plastic tweezers, etc.
The listing says that it doesn't come with buttons, but mine did; either way, taking them off the old one is a breeze as well.
Click to expand...
Click to collapse
Nice find and great info. Looks like parts are out there; gotta love eBay. Thanks for sharing!
All is well here; hope the same for you.

Categories

Resources