Database Info

I emailed Samsung about a few things, here is the response

Thought I'd share this with you guys. I recommend sending out a similar email so that they know that there are serious concerns about the phone. I did it online at the Contact Us page on the Samsung website.
Here's what I wrote:
Hello,
I recently purchased a Samsung Captivate. Overall, I am quite pleased with the device. However, there are a few things that irritate me about it that I was hoping you could comment on:
1.) There is a serious lag issue. Do a quick google search and you'll find that this is a universal problem with the phone.
2.) The GPS does not work. Also a universal issue.
3.) No 2.2 Froyo.
4.) No last.fm scrobbling support for the default music player (which I love by the way!)
5.) Drivers for Windows 7 x64 do not work well. After a lot of trial and error, I finally got it. Again, a universal issue.
A lot of people complain about the TouchWiz UI, but I personally enjoy it, as long as the lag issue is taken care of. Also I'm pleased with the phone call quality, and almost all other aspects of the phone.
I appreciate your time, and hope to hear from you soon.
Thank you,
[thecoolestcow]
Here is the response:
Dear [thecoolestcow],
Thank you for your inquiry.
Regarding the GPS on the phone, Samsung Mobile is aware that under certain conditions, the GPS on our U.S. Galaxy S devices may not be meeting performance expectations. We are diligently evaluating the situation and will provide an update as soon as possible.
We advise you to use assisted GPS powered by your service provider.
We still don't have any update regarding the release of the Android 2.2 for the Captivate and the drivers that will be compatible with Windows 7 64bit.
We will forward your report of this behavior along to the appropriate parties for additional review and consideration.
We are unable to speculate when/if this software revision might be available due to the fact that this might lead to inaccurate information and confusion.
Should this become available, it will be posted on our website in the Samsung Download Center.
Please feel free to check back with us periodically for updates.
Should you desire additional assistance resolving this, we invite you to call Samsung Customer Support by phone at our toll free number 1-888-987-4357 between the hours 7:00 a.m. to 9:00 p.m. Monday through Friday, and 9:00 a.m. to 6:00 p.m. Saturday, Central Standard Time.
Thank you for choosing Samsung.
Sincerely,
Technical Support

thecoolestcow said:
Thought I'd share this with you guys. I recommend sending out a similar email so that they know that there are serious concerns about the phone. I did it online at the Contact Us page on the Samsung website.
Here's what I wrote:
Hello,
I recently purchased a Samsung Captivate. Overall, I am quite pleased with the device. However, there are a few things that irritate me about it that I was hoping you could comment on:
1.) There is a serious lag issue. Do a quick google search and you'll find that this is a universal problem with the phone.
2.) The GPS does not work. Also a universal issue.
3.) No 2.2 Froyo.
4.) No last.fm scrobbling support for the default music player (which I love by the way!)
5.) Drivers for Windows 7 x64 do not work well. After a lot of trial and error, I finally got it. Again, a universal issue.
A lot of people complain about the TouchWiz UI, but I personally enjoy it, as long as the lag issue is taken care of. Also I'm pleased with the phone call quality, and almost all other aspects of the phone.
I appreciate your time, and hope to hear from you soon.
Thank you,
[thecoolestcow]
Here is the response:
Dear [thecoolestcow],
Thank you for your inquiry.
Regarding the GPS on the phone, Samsung Mobile is aware that under certain conditions, the GPS on our U.S. Galaxy S devices may not be meeting performance expectations. We are diligently evaluating the situation and will provide an update as soon as possible.
We advise you to use assisted GPS powered by your service provider.
We still don't have any update regarding the release of the Android 2.2 for the Captivate and the drivers that will be compatible with Windows 7 64bit.
We will forward your report of this behavior along to the appropriate parties for additional review and consideration.
We are unable to speculate when/if this software revision might be available due to the fact that this might lead to inaccurate information and confusion.
Should this become available, it will be posted on our website in the Samsung Download Center.
Please feel free to check back with us periodically for updates.
Should you desire additional assistance resolving this, we invite you to call Samsung Customer Support by phone at our toll free number 1-888-987-4357 between the hours 7:00 a.m. to 9:00 p.m. Monday through Friday, and 9:00 a.m. to 6:00 p.m. Saturday, Central Standard Time.
Thank you for choosing Samsung.
Sincerely,
Technical Support
Click to expand...
Click to collapse
man I just dont see this lag yall are talking about... Had the phone since day 1, no lag fix and its fast as my n1 on 2.2. about.. Wierd...
Also GPS does work, just not reliably all the time, some works fine, others not, others sometimes.. So saying it dont work is exadurating. I just dont want people that dont have one think that the GPS dont work. It does and I use it everyday without issue. No fixes or anything, mine and some others works...
2.2 froyo will be here soon. Hold your horses on and it will be here next month I will bet...

I didn't see the lag either for a while, but I see it in most of the Samsung native apps, like Messaging and the screen unlock.
GPS also used to work amazingly. It just stopped completely now for me.
It's good though that they acknowledged in the email that they were going to release a fix for it.

thecoolestcow said:
I didn't see the lag either for a while, but I see it in most of the Samsung native apps, like Messaging and the screen unlock.
GPS also used to work amazingly. It just stopped completely now for me.
It's good though that they acknowledged in the email that they were going to release a fix for it.
Click to expand...
Click to collapse
Yea, Well Im certain it will be fixed. The samsung epic 4g is rumored to have a working GPS (more testing needs done for me to believe it for sure) and if we have the same hardware gps wise as the Epic 4g we should definatly see a fix...

Nice, Engadget confirms.
engadget.com/2010/08/18/samsung-says-gps-is-tested-and-validated-on-epic-4g-our-testi/

There is most certainly lag. Like you guys, it wasn't a big deal until I saw the lag fix.
Long story short, I've been running the lag fix about a week, then borked my phone with another tweak and had to revert back to stock. HOLY COW was that thing slow... I never really knew any different until I had seen greener pastures
I will say I don't think the DEFAULT lag is worse than any other phone on the market. But it is capable of much, much faster.

Also you forgot to include the complaint that MMS doesn't work on EDGE, only 3G.

TexUs said:
There is most certainly lag. Like you guys, it wasn't a big deal until I saw the lag fix.
Long story short, I've been running the lag fix about a week, then borked my phone with another tweak and had to revert back to stock. HOLY COW was that thing slow... I never really knew any different until I had seen greener pastures
I will say I don't think the DEFAULT lag is worse than any other phone on the market. But it is capable of much, much faster.
Click to expand...
Click to collapse
Which lag fix did you use? I saw several. I haven't rooted my device yet because I'm a little girl. I'm trying to gather as much info as possible first.

thecoolestcow said:
Which lag fix did you use? I saw several. I haven't rooted my device yet because I'm a little girl. I'm trying to gather as much info as possible first.
Click to expand...
Click to collapse
Well I did all my tweaks manually the first time. However when I borked and started over I used this: http://forum.xda-developers.com/showthread.php?t=751934
That will do all necessary tweaks at once. Just download the update.zip file to the root of your INTERNAL card, reboot into recovery mode (ask if you don't know how... easiest way is to use ADB), and select "reinstall packages" and you're done.
Just check the post I linked to, but it'll remove all the ATT crapware, remove the loud startup sounds, install root, block ads, etc.
After it's ran you then can go into the app it adds and run the lag fix... After you run that script it needs a reboot... And then you've got a lag fixed phone that runs twice as fast. ROM Manager, for instance, takes like a whole freaking minute it seems to open un-lag-fixed. Lag-fixed it takes several seconds max.

TexUs said:
Well I did all my tweaks manually the first time. However when I borked and started over I used this: forum.xda-developers.com/showthread.php?t=751934
That will do all necessary tweaks at once. Just download the update.zip file to the root of your INTERNAL card, reboot into recovery mode (ask if you don't know how... easiest way is to use ADB), and select "reinstall packages" and you're done.
Just check the post I linked to, but it'll remove all the ATT crapware, remove the loud startup sounds, install root, block ads, etc.
After it's ran you then can go into the app it adds and run the lag fix.
Click to expand...
Click to collapse
Holy crap, how did I miss that one? Excellent, thank you. I will likely be doing that in the near future!
Sent from my SAMSUNG-SGH-I897 using XDA App

thecoolestcow said:
Holy crap, how did I miss that one? Excellent, thank you. I will likely be doing that in the near future!
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
NP.
I'm happy with 2.1 right now... I mean the Captivate at 2.1 runs faster than anything else on the market, including the N1 2.2......
So I can live with 2.1 until Samsung releases 2.2
Once you see how much faster it is with the lag fix, you'll start to wonder how much faster 2.2 will be. The Captivate will be untouchable.

There is definitely significant lag on the stock firmware - most notably for me with the marketplace but s also for some other apps when they are loading data. I haven't applied any fixes yet as I'm waiting for a decent firmware update before I do too much with my phone.
JH2/3 are looking like good bets, but I would suspect that an official firmware is right around the corner given the few changes between JH2 and JH3.
Sent from my SAMSUNG-SGH-I897 using XDA App

Why wait? It takes 5 minutes to vastly improve the usability of your phone.

And worst comes to worst, you use the Odin3 one-click to restore it to stock. Seems pretty awesome. I'll probably be "super-rooting" tonight!

Also to note you should only be doing that super-rooting from stock to start with... It's the most reliable method anyway. You can try it from what you've got but- if there's issues you just need to do it from stock.

Hm. And there's no way to back up my apps/data right?

thecoolestcow said:
Hm. And there's no way to back up my apps/data right?
Click to expand...
Click to collapse
Yes, download ROM Manager but you need to be rooted first I think... So you can root your phone only (same process but it just does rooting: http://forum.xda-developers.com/showthread.php?t=725555), download/install ROM Manager (http://forum.xda-developers.com/showthread.php?t=734163). Then when you reboot into the ROM Manager recovery screen there's nandroid backup utility that'll back up everything.
If you like selective backups of stuff you can also use Titanium Backup (also requires root).

smashpunks said:
man I just dont see this lag yall are talking about... Had the phone since day 1, no lag fix and its fast as my n1 on 2.2. about.. Wierd...
Also GPS does work, just not reliably all the time, some works fine, others not, others sometimes.. So saying it dont work is exadurating. I just dont want people that dont have one think that the GPS dont work. It does and I use it everyday without issue. No fixes or anything, mine and some others works...
2.2 froyo will be here soon. Hold your horses on and it will be here next month I will bet...
Click to expand...
Click to collapse
GPS does NOT work. It barely functions, so it does not work. Anybody that says it does is just trying fool themselves into thinking they didnt make a mistake. GPS absolutely does not work. Its been documented by numerous sources and tens of thousands (or more) vibrant and captivate users here in the US. For Christ's sake, even Samsung has admitted that it doesnt work. They've used incorrect drivers from Broadcom, so it can't possibly work.
Samsung may release Froyo to the carriers toward the end of next month, but it'll be quite a while before AT&T releases it to us. They have to go through and add all their crapware and remove any functionality that's in the stock rom that they can charge money for (this really pisses me off I REALLY, want that wifi hotspot functionality!!!) and they have to cripple the kernel and radio so there'll be no HSUPA.

derek4484 said:
GPS does NOT work. It barely functions, so it does not work. Anybody that says it does is just trying fool themselves into thinking they didnt make a mistake. GPS absolutely does not work. Its been documented by numerous sources and tens of thousands (or more) vibrant and captivate users here in the US. For Christ's sake, even Samsung has admitted that it doesnt work. They've used incorrect drivers from Broadcom, so it can't possibly work.
Samsung may release Froyo to the carriers toward the end of next month, but it'll be quite a while before AT&T releases it to us. They have to go through and add all their crapware and remove any functionality that's in the stock rom that they can charge money for (this really pisses me off I REALLY, want that wifi hotspot functionality!!!) and they have to cripple the kernel and radio so there'll be no HSUPA.
Click to expand...
Click to collapse
We're about a month after release and have Vanilla Android 2.1 ROMs, so chill out. Have some patience, I'm sure we'll see them for 2.2 as well.

derek4484 said:
GPS does NOT work. It barely functions, so it does not work. Anybody that says it does is just trying fool themselves into thinking they didnt make a mistake. GPS absolutely does not work. Its been documented by numerous sources and tens of thousands (or more) vibrant and captivate users here in the US. For Christ's sake, even Samsung has admitted that it doesnt work. They've used incorrect drivers from Broadcom, so it can't possibly work.
Samsung may release Froyo to the carriers toward the end of next month, but it'll be quite a while before AT&T releases it to us. They have to go through and add all their crapware and remove any functionality that's in the stock rom that they can charge money for (this really pisses me off I REALLY, want that wifi hotspot functionality!!!) and they have to cripple the kernel and radio so there'll be no HSUPA.
Click to expand...
Click to collapse
Mine works and so do others in those thousands of people threads. If you would like I can copy n paste them for ya...
Its directed me to many places perfectly so it works, its just unreliable and not the best, hence needs to be optimized ...
now post a link where samsung admitted using incorrect drivers? I've never saw that...

We may need a campaign of annoyance...

Folks,
There's been no word, no dates given or leaked about the ICS update we're supposed to be receiving. Samsung has said we're supposed to get the update, but T-Mobile has been quiet. Hell, Samsung just announced that the GS2 will be getting JB and they've been working on it. I don't know how well that translates to the T-Mobile variant of the GS2, but it's still something. All we need is a kernel and some camera drivers. Hell, we could probably get away without the camera drivers and mangle the old ones using a compatibility HAL..
It is starting to feel like T-Mobile is simply going to forget the blaze. I mean, they released an update already, why would they hurry on to the next update...
I think if we're going to get something for nothing, we'll have to make noise about it. Same way we got this forum. I think it's going to take bugging t-mobile on the forums and on their support lines. You people on contract have it worse. You bought a really powerful phone in the presence of ICS, some of you after the promise that it would receive the update. T-Mobile wouldn't suffer penalties if they didn't push it, but I imagine they'll respond to some social pressure enough not to simply forget the update.
Hell, it'd be nice if we could even just get a date.

I agree with you. At this point I'd be happy with some sort of update from Samsung/T-Mobile. Even if they just said "we're still working on it" and gave no ETA at least we'd know they hadn't forgotten about it.
If the Blaze Q whatever the hell they've decided to call it launches here in a few weeks with ICS and we still don't get the software I will be ticked.
If push comes to shove and they don't release it can the devs port it or JB from another galaxy phone?
Correct me if I'm wrong but my understating is that it can but would take a lot of work and all are holding off since ICS is supposed to be dropping at anytime. No sense in going thru all that work only to have an official release dropped on us.
Sent from my Samsung Galaxy S Blaze.

Lol bugging xda mods for a forum is NOT the same a bugging T-Mobile for eta.
Sent from my SGH-T769 using xda app-developers app

dr4stic said:
Folks,
There's been no word, no dates given or leaked about the ICS update we're supposed to be receiving. Samsung has said we're supposed to get the update, but T-Mobile has been quiet. Hell, Samsung just announced that the GS2 will be getting JB and they've been working on it. I don't know how well that translates to the T-Mobile variant of the GS2, but it's still something. All we need is a kernel and some camera drivers. Hell, we could probably get away without the camera drivers and mangle the old ones using a compatibility HAL..
It is starting to feel like T-Mobile is simply going to forget the blaze. I mean, they released an update already, why would they hurry on to the next update...
I think if we're going to get something for nothing, we'll have to make noise about it. Same way we got this forum. I think it's going to take bugging t-mobile on the forums and on their support lines. You people on contract have it worse. You bought a really powerful phone in the presence of ICS, some of you after the promise that it would receive the update. T-Mobile wouldn't suffer penalties if they didn't push it, but I imagine they'll respond to some social pressure enough not to simply forget the update.
Hell, it'd be nice if we could even just get a date.
Click to expand...
Click to collapse
I completely agree with you. To be honest, I am already pissed off that they still havent released it. When I got this phone, T-Mobile promised I was going to get an ICS update in July. Yeah, so much for that. At the very least they could acknowledge our presence and let us know that they havent forgotten about us

Chitown021 said:
If push comes to shove and they don't release it can the devs port it or JB from another galaxy phone?
Correct me if I'm wrong but my understating is that it can but would take a lot of work and all are holding off since ICS is supposed to be dropping at anytime. No sense in going thru all that work only to have an official release dropped on us.
Click to expand...
Click to collapse
The problem is the kernel and libraries specific to our hardware. We have to have a working kernel and libraries before the rest of the rom can come.
I'm not sure why people thought the Blaze Q would've been a good thing for us because unless the hardware was identically similar (which no one had any proof that it was), the releases for that phone would've been useless for ours. The fact that it's now coming with a 720p display (I would've stayed with my Blaze 4G if it had that), and a keyboard tells me that there will be PLENTY different between the phones.
Hardware-wise, the T769 (Blaze) is EXTREMELY similar to the T989 (T-Mo SGS2). How similar you ask? In the original kernel configuration file for the T769, the options are set to build it as a T769 AND T989. There are a few ifdefs that exist purely to stop little snippets of the T989 code from taking effect.
I worked on my own time to try and hack together a kernel from the released sources for the T989 for ICS. Porting specific code from the T769 sources to try to come up with something that worked. Here's the problem: it was stressful and thankless, and at the end of it all I had a kernel that would compile and not boot. No one collected anything to help me attempt this and I was getting tired of having a non-functioning phone that pissed me off. So I ordered me a Galaxy Nexus. I received 2 in a row with screen issues and ended up returning them. I figured I would return to my efforts with the blaze, but at that point I was used to the big phone with a beautiful 720p resolution... so I shelled out the money for a GS3.
I have thought of returning and making a second attempt to port the kernel, and have actually started setting up to do just that. I think I made some mistakes my first time around, so the second time might actually work. But it is A PAIN.
chjema said:
Lol bugging xda mods for a forum is NOT the same a bugging T-Mobile for eta.
Click to expand...
Click to collapse
You're right, it isn't... but it's the last time I saw this community bug an outside source for something, aside from buying a couple of guys a phone

Yeah, a 720p screen would have been nice... thanks for the detailed explanation.
I still find it comical that my old HD2 is on the verge of having a fully functional JB rom but my brand new Blaze is still stuck on GB.
Honestly if I could've afforded it I would have probably gone the Nexus or S3 route but given my limited funds and needing to cover two phones (wife needed an upgrade) I thought this was the best value ($30 upgrade cost at Target).
Sent from my Samsung Galaxy S Blaze.

Yes lets please do this.
T-Mobile hasn't updated their page for a month now, and that was for the Gingerbread update they released when they could have been making headway on ICS. I can't find out how to submit any new pages, but I can see two requests for an update that were a couple months old (click on the link, then read on the right side in section "Incoming Links") source = http://support.t-mobile.com/docs/DOC-4182
I went to Samsung's page about ICS updates, and rated it "very dissatisfied," informing them they should have supplied target Year and Quarter (i.e. 2012 Q3) at the minimum, but preferably a specific month. source = http://www.samsung.com/us/support/SupportOwnersFAQPopup.do?faq_id=FAQ00046726&fm_seq=49755
Let's continue to put pressure on these assholes, or they will sweep us under the bus while they pursue development of the Samsung Galaxy Supernova 4G Touchwiz Xtra 4.1.

Not to be a **** ... but what's the rush? What's wrong with the software on your phone now? I've had this Blaze for a couple months and I don't think I ever had a problem. I have ICS on a tablet and like it, but I never felt like I needed to light the torches and march on the castle because I didn't have the latest **** on my phone.
And honestly, if a delay of an update for a great phone that works perfectly fine is what keeps you up at night, just wow...
If I am missing something critical here that I should know about (phone will explode without ICS ROM installed, I have a higher risk of cancer if I don't have ICS on phone, etc) please let me know immediately. I have poster boards, Sharpies, and a willingness to assemble if needed.

Dr4stic
If you need want help, testing, anything.let me know of beer more than happy to help.. we need to get ics to this phone
Sent from my SGH-T769 using xda app-developers app

heavenlydemonic said:
Not to be a **** ... but what's the rush? What's wrong with the software on your phone now? I've had this Blaze for a couple months and I don't think I ever had a problem. I have ICS on a tablet and like it, but I never felt like I needed to light the torches and march on the castle because I didn't have the latest **** on my phone.
And honestly, if a delay of an update for a great phone that works perfectly fine is what keeps you up at night, just wow...
If I am missing something critical here that I should know about (phone will explode without ICS ROM installed, I have a higher risk of cancer if I don't have ICS on phone, etc) please let me know immediately. I have poster boards, Sharpies, and a willingness to assemble if needed.
Click to expand...
Click to collapse
Nope, just a league of people whining because that makes things happen faster. There really is nothing more to it.

I'll be the first to admit I've become a bit jaded because of my experiences with T-Mobile / Samsung and the Samsung Vibrant.
I heard promises about updates to that phone - they even set dates and pushed them back and back and back and finally... nothing.
If anything I think the release of the Blaze Q is a strike against us because our phones are now the "out dated" version of the Blaze and why put development hours into an "old" device.
I'm happy that I have a fully functional phone as it is now (the Vibrant never really had a fully working GPS). An update would be nice but I wouldn't lose any sleep over it because honestly, you may just be setting yourself up for a lot of sleepless nights.
Oh, and on the Vibrant Forum they started a twitter campaign #NeverAgain demanding the promised upgrade or they would never use T-mobile or Samsung again. No one listened.
I know this all sounds cynical but I've seen this show before.
Edit to add: If memory serves correctly this was also the case with the Behold on T-mobile.

Hey i know im new here, but i was wondering if you guys have only attempted to port ics roms from the SII? Ive tried to do the same and only recieved a glittery sparkly screen. I was wondering if anyone tried other devices with similar hardware like the HTC amaze 4g. I tried to port that one and actually got the boot animation to pop up. I havent tried to do any logcats or anything because i have been to busy and i need my phone for work, but if anyone else has tried to port from other devices i would like to know so i can know where to start if i do decide to try again.

L7ChrisL7 said:
Hey i know im new here, but i was wondering if you guys have only attempted to port ics roms from the SII? Ive tried to do the same and only recieved a glittery sparkly screen. I was wondering if anyone tried other devices with similar hardware like the HTC amaze 4g. I tried to port that one and actually got the boot animation to pop up. I havent tried to do any logcats or anything because i have been to busy and i need my phone for work, but if anyone else has tried to port from other devices i would like to know so i can know where to start if i do decide to try again.
Click to expand...
Click to collapse
The reason you get a glittery screen when coming from roms that are like the SGS2 is because they use different display panel hardware than we do. I'd be careful porting things from different manufacturers unless you really know what you're doing. You'd hate to go and format some partitions you can't get back

heavenlydemonic said:
Not to be a **** ... but what's the rush? What's wrong with the software on your phone now? I've had this Blaze for a couple months and I don't think I ever had a problem.
Click to expand...
Click to collapse
What happens when more "cool new apps" are released to the market that require Android 4.0 API's or better? Chrome immediately comes to mind, and there are others with many more on the way. What happens 4 months from now when you are only 6 months into your 2 year contract and you're wondering why you can't realistically run things on your phone that has 1 gig of ram and a dual-core 1.5ghz cpu?
And honestly, btw... I had a myTouch 4G running CM7 that felt miles faster than my blaze. The samsung crapware is not only bloated, but breaks the system in a number of places. You can see this in the fact that you can't have a scrollable wallpaper, or that the system doesn't understand all the loop points in ringtones that work properly in other phones. I can't tell you how frustrated I get by an unlock and/or answer mechanism that can't track my fingers in real time like something as simple as CM7 does.
And don't get me started on the underutilisation of the video hardware.
AwesomeTurtle said:
Nope, just a league of people whining because that makes things happen faster. There really is nothing more to it.
Click to expand...
Click to collapse
No, this phone was released with a promise. When it was released, ICS had been out for 6 months or more, and I'm sure the OEMs had access to the system and API's well before the official release. By the time ICS is released for our phones (IF it is released for our phones), JB will have been out for several months.
This is a matter of support and broken promises. I am NOT just whining. I was sold a phone with a promise of ICS and it has NOT been delivered, and at this point the time has gone beyond reasonable.
If we don't make noise now, it WILL be forgotten and you're going to end up with a phone outdated well before it's time.

dr4stic said:
The reason you get a glittery screen when coming from roms that are like the SGS2 is because they use different display panel hardware than we do. I'd be careful porting things from different manufacturers unless you really know what you're doing. You'd hate to go and format some partitions you can't get back
Click to expand...
Click to collapse
Yeah the first time i tried to flash the rom nothing happened. ahah but then i went into the updater script changed some things and got it to flash. but since the hard ware is the same do you think i could use the display drivers from the amaze 4g and replace them in the SII rom and maybe it will work? well maybe i will have to do some logcats to see why the amaze rom isnt booting.

L7ChrisL7 said:
Yeah the first time i tried to flash the rom nothing happened. ahah but then i went into the updater script changed some things and got it to flash. but since the hard ware is the same do you think i could use the display drivers from the amaze 4g and replace them in the SII rom and maybe it will work? well maybe i will have to do some logcats to see why the amaze rom isnt booting.
Click to expand...
Click to collapse
I doubt it. The drivers are baked into the kernel, they aren't modules or libraries. You'd have to get another compiled kernel working for our device, and you'll undoubtedly lose other drivers (camera, wifi come to mind). It's, of course, up to you to brick your own phone

dr4stic said:
I doubt it. The drivers are baked into the kernel, they aren't modules or libraries. You'd have to get another compiled kernel working for our device, and you'll undoubtedly lose other drivers (camera, wifi come to mind). It's, of course, up to you to brick your own phone
Click to expand...
Click to collapse
Well cant you decompile a kernel? or maybe if i get the source of both devices i can use the code to compile a new kernel... hmmm all stuff to try. but compiling a kernel takes a while i think ill update my PC first haha. Im not necessarily worried about the other drivers not working, i just want to make progress, or at least help us make a push in the right direction. Im sorry if im being too optimistic or noobish, i just want to learn what people have and havent tried, so i dont waste my time on what has already been done.

http://support.t-mobile.com/community/phones_data_devices/android/blaze_4g?view=discussions
^--Post a thread in the T-mobile discussion forums! The most recent thread so far is asking for a status update, and if you guys can make more posts/threads about it, maybe we'll get a response from someone

here's a thread we can vent at!
spartanerik said:
http://support.t-mobile.com/community/phones_data_devices/android/blaze_4g?view=discussions
^--Post a thread in the T-mobile discussion forums! The most recent thread so far is asking for a status update, and if you guys can make more posts/threads about it, maybe we'll get a response from someone
Click to expand...
Click to collapse
I already did - rather I saw a post and have decided to bump it daily so it remains at the top.
http://support.t-mobile.com/thread/31124?tstart=0
Create a support account and let's let them know they need to get this done!!!
Every post on the support forum discussing the ICS update will get a post (and bump) from me everyday!

anactoraaron said:
I already did - rather I saw a post and have decided to bump it daily so it remains at the top.
http://support.t-mobile.com/thread/31124?tstart=0
Create a support account and let's let them know they need to get this done!!!
Every post on the support forum discussing the ICS update will get a post (and bump) from me everyday!
Click to expand...
Click to collapse
http://support.t-mobile.com/people/tmo_erica
Try sending an email to [email protected] and ask (nicely) about a status update on the ICS update for our phone! I just sent one, and hopefully if we send enough we can get some traction

New firmware for 3113...

Anyone have thoughts on what the new firmware is for the P3113? I just got an alert on my rooted device that I have a new firmware upgrade.
another useless update that I don't need?

I just checked for an update on my tablet and there doesn't seem to be one available. But if there is soon I will let you know of any obvious changes.

dansskittles said:
I just checked for an update on my tablet and there doesn't seem to be one available. But if there is soon I will let you know of any obvious changes.
Click to expand...
Click to collapse
Thanks! I appreciate it.
You can download it here http://samsung-updates.com/device/?id=GT-P3113
Just not sure if it's worth it, and what will happen since I am rooted. It's not a full upgrade to JB which I know I would need to do an FDR for, but just a minor update (which could be leading to JB later on down the road, there have been 2 updated in the last 30ish days, thats usually a good sign, from past device experiences at least lol).

Perhaps HDMI support and/or UMS support for the external sd card? I can dream, can't I...

Dreams do come true, they can happen to you...
rsage said:
Perhaps HDMI support and/or UMS support for the external sd card? I can dream, can't I...
Click to expand...
Click to collapse
I love your dreams, and I share those dreams with you too. Let me know if I should buy a lotto ticket, since it would be a nice lucky day.

If it where HDMI support I would suspect we would see an adapter available on Samsung's website for this tablet. Since there is none I'm guessing its something more mundane. However my tab is charging up now in preparation of the update and will let you know as soon as I can.
So I installed the update and right off the bat nothing jumped out at all lol. So I went through to find changes and kinda came up with nothing. I could probably do some more serious digging to find what has been changed. If you have anything you want me to test with it I will just let me know.

App to SD?
dansskittles said:
If it where HDMI support I would suspect we would see an adapter available on Samsung's website for this tablet. Since there is none I'm guessing its something more mundane. However my tab is charging up now in preparation of the update and will let you know as soon as I can.
So I installed the update and right off the bat nothing jumped out at all lol. So I went through to find changes and kinda came up with nothing. I could probably do some more serious digging to find what has been changed. If you have anything you want me to test with it I will just let me know.
Click to expand...
Click to collapse
That would be the only thing I could want to see to be honest since nothing else has lol. I think it might be a primer update to go to JB in the next month or 2, which means I'll have to go back and update through since I am rooted and shouldn't try to update till unrooted.
Then again I could be 100% wrong, so don't pin hopes on my theory lol.

Galaxy S4 i9507 (Aus/HK only) custom firmware success!

Hi all, made an account in anticipation of my night spent mucking around with my new Galaxy S4 i9507. I had been reading about people who have had success and some who have had less success with getting custom ROMs on their devices. None said what methods they used, so I decided to compile together what I did today.
UPDATE 3/6/14
I installed a snapshot of CM 11 (KitKat) onto my device with little issues. I'll update this guide with the links to that firmware, and also update the existing links because of changes CyanogenMod made to how they aggregate their S4 devices now. They are treating them all as derivatives of 'jftle', so basically one firmware fits all devices, including the i9507! (even if not official yet).
Please read the bottom of this post if you wish to install KitKat on your device.
CUSTOM FIRMWARE ON SAMSUNG GALAXY S4 i9507 - Aus/HK
Tonight I have managed to root the device's stock firmware (I have the Australian Optus/Virgin device); install ClockworkMod Recovery on the stock firmware, and then use it to install CyanogenMod 10.2.0 (jfltexx) on the device.
If you're looking to root this device, I found that by treating it essentially as an international i9505 I was able to fulfil all three of the things I mentioned above.
UPDATE: THIS WILL VOID YOUR WARRANTY AND RESULT IN 'KNOX WARRANTY VOID 0x1' BEING DISPLAYED WHEN YOU ENTER DOWNLOAD MODE ON THE DEVICE. PLEASE BE SURE YOU ARE OKAY WITH THIS HAPPENING BEFORE TRYING THIS FOR YOURSELF. AS IT STANDS, KNOX CANNOT BE RESET, IT IS AT A HARDWARE LEVEL.
[ROOT i9507]
Using Chainfire's guide to CF-Auto-Root in the Galaxy S 4 i9505 Original Android Development section of this forum; I was able to root my device despite it being an i9507. Being a new user, I wasn't sure exactly what things to test out whether the root worked/was permanent, but I did install AdBlock Plus and it asked me for Superuser privileges, then proceeded to work. I also restarted the device and tested whether the root was still present; it was.
[INSTALL CLOCKWORKMOD]
I decided to install CyanogenMod as I have heard from friends that have it; and read online about it being one of the more stable custom ROMs available. It has been a while since I last owned an Android device! So, continuing with my theme of treating this device as being an international i9505, I obtained CM 10.2.0, a stable release of the jfltexx CM, based on from their website (as of December 2013, this was the most recent). Their custom installer app on Windows did not support my phone, so I had to use their guide for manual installation.
Their guide contained steps to installing ClockworkMod Recovery as well as the ROM installation. Following the guide, I installed it without a hitch. When rebooting the phone from ClockworkMod, it prompted me about the fact that the phone may reflash its own recovery tool, but this did not happen. Once again, a success.
[INSTALL CYANOGENMOD]
The last task was to install CM. This was quite an endeavour as I decided to use someone else's Windows 8 laptop (being the only Windows device I had access to at the time) and I forgot how much of a struggle it can be! Again, I used CM's guide to installing 10.2.0 (which by the way is Android 4.3.1, whereas the stock firmware is bloated and heavy at 4.2.2). This went off without a hitch once I reminded myself how the ADT works. I also did as CM suggested and installed the Google Apps pack alongside the ROM.
So, currently this is where I'm at. The device boots and reboots fine. Some users in certain threads had issues with loading 4.4 (KitKat) ROMs or custom ROMs that they didn't allude to the names of, so I don't know if they were having issues with CM or not. There are other threads, but that was the one that kickstarted my attempts to get this all to work. Their issues with the custom ROMs seemed to be related to the 4.4 ROM not recognising the modem of the i9507; I'm not sure why this is but the i9507 was made specifically for Australian/Hong Kong networks so perhaps 4.4 has not been updated yet or something of the like. Anyway, on 4.3.1, or CM 10.2.0, my SMS, calling, and internet are working fine (it displays Virgin Mobile as my carrier). My 4G reception is somewhat iffy in this town (or in particular my house), and the reception seems to be switching between 3G and H so whether that is indicative of 4G not working, I'm not sure. LTE is definitely checked in the settings, however, and my area does have 4G, but my parents' iPhone 5Ss sometimes do not have 4G in this house either. I'll report back tomorrow after having tested the phone for a day to see if the 4G does activate.
As it stands, however, the phone seems to be functioning well. Oddly the Settings report that the phone is an i9505, I assume that's normal as I'm using a ROM for that particular phone!
[CONCLUSION]
So, I hope that anyone who has been looking for a way to remove the carrier/Samsung bloat from their i9507 device will have a good time using the guides I've used. I followed them to the letter and I had no issues.
DISCLAIMER: I had no troubles, but that's not to say you won't either. Please be careful, as you may potentially risk affecting your phone negatively. I'm simply telling you what I did, not giving you a 100% correct and flawless guide that will work no matter what.
Also if you're looking for a 4.4 ROM then you might be out of luck, least till some dev or coder takes notice of this device's existence and helps out to develop a specific way of rooting this phone/installing custom ROMs for this phone. Overall though, it seems to all work fine so perhaps the 4.3.1 CM isn't such a bad thing.
If you try this and want the original firmware back on your phone, use this link. I believe that OPS is the Australian firmware, the other one is for Hong Kong. So, for the second link, HK is Hong Kong, and the one without is for Aus.
UPDATE 3/6/14
I've successfully managed to install a Nightly build of CM 11, based on KitKat. Read my latest post in this forum for more info. I essentially found that upgrading from within the phone itself caused a number of issues so I did a fresh flash. Please note that such a flash of a new OS wipes all personal data but not things like images, videos, etc. I lost all my contacts, SMS, browsing history, apps etc. But my Gallery, Downloads folder, etc remained intact.
I followed my guide to flashing the phone again, but I used a Nightly build of CM 11, based on KitKat. As I write this, there are actually stable versions of CM that you can use in place of the CM 10.2.0 I used in the above guide. If you follow those steps but use this firmware you'll find no issue. Feel free to use CM's guide, but don't, under any circumstances, forget to flash Google Apps to your phone!!!
If you need a hand or want a question answered, feel free to post here and I'll do my best to help you out. Thanks!

kaiserwatson said:
Hi all, made an account in anticipation of my night spent mucking around with my new Galaxy S4 i9507. I had been reading about people who have had success and some who have had less success with getting custom ROMs on their devices. None said what methods they used, so I decided to compile together what I did today.
Tonight I have managed to root the device's stock firmware (I have the Australian Optus/Virgin device); install ClockworkMod Recovery on the stock firmware, and then use it to install CyanogenMod 10.2.0 (jfltexx) on the device.
If you're looking to root this device, I found that by treating it essentially as an international i9505 I was able to fulfill all three of the things I mentioned above.
[ROOT i9507]
Using Chainfire's guide to CF-Auto-Root in the Galaxy S 4 i9505 Original Android Development section of this forum; I was able to root my device despite it being an i9507. Being a new user, I wasn't sure exactly what things to test out whether the root worked/was permanent, but I did install AdBlock Plus and it asked me for Superuser privileges, then proceeded to work. I also restarted the device and tested whether the root was still present; it was.
[INSTALL CLOCKWORKMOD]
I decided to install CyanogenMod as I have heard from friends that have it; and read online about it being one of the more stable custom ROMs available. It has been a while since I last owned an Android device! So, continuing with my theme of treating this device as being an international i9505, I obtained the latest stable release of the jfltexx CM from their website (it was the most recent stable release at the time, may be out of date by the time you get to doing this yourself). Their custom installer app on Windows did not support my phone, so I had to use their guide for manual installation.
Their guide contained steps to installing ClockworkMod Recovery as well as the ROM installation. Following the guide, I installed it without a hitch. When rebooting the phone from ClockworkMod, it prompted me about the fact that the phone may reflash its own recovery tool, but this did not happen. Once again, a success.
[INSTALL CYANOGENMOD]
The last task was to install CM. This was quite an endeavour as I decided to use someone else's Windows 8 laptop (being the only Windows device I had access to at the time) and I forgot how much of a struggle it can be! Again, I used CM's guide to installing 10.2.0 (which by the way is Android 4.3.1, whereas the stock firmware is bloated and heavy at 4.2.2). This went off without a hitch once I reminded myself how the ADT works. I also did as CM suggested and installed the Google Apps pack alongside the ROM.
So, currently this is where I'm at. The device boots and reboots fine. Some users in certain threads had issues with loading 4.4 (KitKat) ROMs or custom ROMs that they didn't allude to the names of, so I don't know if they were having issues with CM or not. There are other threads, but that was the one that kickstarted my attempts to get this all to work. Their issues with the custom ROMs seemed to be related to the 4.4 ROM not recognising the modem of the i9507; I'm not sure why this is but the i9507 was made specifically for Australian/Hong Kong networks so perhaps 4.4 has not been updated yet or something of the like. Anyway, on 4.3.1, or CM 10.2.0, my SMS, calling, and internet are working fine (it displays Virgin Mobile as my carrier). My 4G reception is somewhat iffy in this town (or in particular my house), and the reception seems to be switching between 3G and H so whether that is indicative of 4G not working, I'm not sure. LTE is definitely checked in the settings, however, and my area does have 4G, but my parents' iPhone 5Ss sometimes do not have 4G in this house either. I'll report back tomorrow after having tested the phone for a day to see if the 4G does activate.
As it stands, however, the phone seems to be functioning well. Oddly the Settings report that the phone is an i9505, I assume that's normal as I'm using a ROM for that particular phone!
[CONCLUSION]
So, I hope that anyone who has been looking for a way to remove the carrier/Samsung bloat from their i9507 device will have a good time using the guides I've used. I followed them to the letter and I had no issues.
DISCLAIMER: I had no troubles, but that's not to say you won't either. Please be careful, as you may potentially risk affecting your phone negatively. I'm simply telling you what I did, not giving you a 100% correct and flawless guide that will work no matter what.
Also if you're looking for a 4.4 ROM then you might be out of luck, least till some dev or coder takes notice of this device's existence and helps out to develop a specific way of rooting this phone/installing custom ROMs for this phone. Overall though, it seems to all work fine so perhaps the 4.3.1 CM isn't such a bad thing.
If you try this and want the original firmware back on your phone, use this link or this one. I believe that OPS is the Australian firmware, the other one is for Hong Kong. So, for the second link, HK is Hong Kong, and the one without is for Aus.
If you have any questions, please feel free to ask. I'll post later tomorrow when I've tested the phone for a day to see if it's still working, and to see if the 4G/LTE does actually work. Fingers crossed nothing goes wrong in the meantime!
Click to expand...
Click to collapse
I've had my i-9507 rooted for about a month now with foxhound rom, also on the optus variant.
One thing i've noted is, its next to impossible to update the MODEM for it.
I think because our latest modem for this variant is the one we have stock. And new updates haven't been put in terms of modem specifically for our variant yet.
We should keep this thread stickied for Australian OPTUS GT-i9507 discussion.
OR open up a sub forum for it.

kaiserwatson said:
I'll post later tomorrow when I've tested the phone for a day to see if it's still working, and to see if the 4G/LTE does actually work. Fingers crossed nothing goes wrong in the meantime!
Click to expand...
Click to collapse
Firstly, thank you for creating this complete description of your experiences with customising the i9507.
Secondly, just wanted confirmation that you do now have the pesky "KNOX WARRANTY VOID: 0x1" displayed when your device is in Download mode, right?
Lastly, any updates, issues? All still working, including 4G/LTE?

Hey sorry its been more than a day, I've been swamped with work, that Christmas time feel.
I do have the Knox 0x1, which I assume means my warranty is void. There's conjecture as to whether that will actually affect warranty for this device in Australia, as I've read up on the Knox system but i think the ACCC would have serious issues with this system actually affecting the warranty. But yes, it would seem my warranty is void, let's hope the phone lasts two years!
I have been able to access 4G, the phone says 4G or LTE, sometimes switching between the two. Again, the reception in the town I'm currently staying in is pisspoor so I can't say for certain whether the antenna/modem is fully functioning to the degree it would be on the stock firmware, but I can definitely access the Optus 4G network.
One issue I did have was that I sent an SMS then immediately turned my screen off, 40 minutes later the message was still 'sending'. I have recreated the same scenario but I haven't been able to get it to happen again, perhaps just a weird tower-side quirk. I know people were having issues with the modem and the phone sleeping but this doesn't seem to be related. Overall I'm really happy with how this has all gone. My battery life has been increased by at least 40% and the phone is so much faster. Very pleased.

kaiserwatson said:
Hey sorry its been more than a day, I've been swamped with work, that Christmas time feel.
I do have the Knox 0x1, which I assume means my warranty is void. There's conjecture as to whether that will actually affect warranty for this device in Australia, as I've read up on the Knox system but i think the ACCC would have serious issues with this system actually affecting the warranty. But yes, it would seem my warranty is void, let's hope the phone lasts two years!
I have been able to access 4G, the phone says 4G or LTE, sometimes switching between the two. Again, the reception in the town I'm currently staying in is pisspoor so I can't say for certain whether the antenna/modem is fully functioning to the degree it would be on the stock firmware, but I can definitely access the Optus 4G network.
One issue I did have was that I sent an SMS then immediately turned my screen off, 40 minutes later the message was still 'sending'. I have recreated the same scenario but I haven't been able to get it to happen again, perhaps just a weird tower-side quirk. I know people were having issues with the modem and the phone sleeping but this doesn't seem to be related. Overall I'm really happy with how this has all gone. My battery life has been increased by at least 40% and the phone is so much faster. Very pleased.
Click to expand...
Click to collapse
That occurs because the modem signal cuts out after you switch your phone off, or lock it.
This issue can be resolved by updating our modems, but with our current variant we can't update it yet apparently, until the correct new modem for our specific variant has been released.

Hi guys,
I thought I would also post here.
I have the optus 9507 and I tried a couple of different kitkat 4.4 roms. They all worked perfectly except for the fact that they lost data completely as soon as the phone went to sleep. the weird thing is, the phone showed 0 bars but i could take calls just fine, just had data issues.
i tried the slimkat rom and the echoe rom with the same issue
i went back to stock firmware, rooted, ran a debloat script i found on xda, removed a bunch more apps, then unrooted again because i need to run good for enterprise for work.
im getting decent battery life with the debloated stock rom but i would like to move to 4.4 if theres a rom that works. ive been watching the optus and sammobile site hoping there will be a newer modem for the hk version because i think optus will take their time releasing 4.3 for this model.

kaiserwatson said:
Hi all, made an account in anticipation of my night spent mucking around with my new Galaxy S4 i9507. I had been reading about people who have had success and some who have had less success with getting custom ROMs on their devices. None said what methods they used, so I decided to compile together what I did today.
Tonight I have managed to root the device's stock firmware (I have the Australian Optus/Virgin device); install ClockworkMod Recovery on the stock firmware, and then use it to install CyanogenMod 10.2.0 (jfltexx) on the device.
......
Click to expand...
Click to collapse
Thanks for your experience sharing,
I also started with Cyanogen and shared about the same experience.
Just didn't know the Knox thing before I started.. should had read up more before doing it.
So you did the Recovery with Heimdall also? What has made you switch to the customized Rom camp

kaiserwatson said:
Hey sorry its been more than a day, I've been swamped with work, that Christmas time feel.
Click to expand...
Click to collapse
Hey, no worries at all, anyone who works weekends can take all the time they need...
But yes, it would seem my warranty is void, let's hope the phone lasts two years!
Click to expand...
Click to collapse
Yea, I've done some reading also and you're right, it seems to be all conjecture, I really doubt handset warranty refusal can be based on the KNOX Warranty chip. I think the Samsung Enterprise Security Group VP explains it well here.
Overall I'm really happy with how this has all gone. My battery life has been increased by at least 40% and the phone is so much faster. Very pleased.
Click to expand...
Click to collapse
Great to hear, based on this I can ge ahead and 'burn out' my eFuse, happy in the knowledge that my Knox warranty has gone to a good cause. :fingers-crossed:
---------- Post added at 08:49 PM ---------- Previous post was at 08:40 PM ----------
opelcalibra said:
then unrooted again because i need to run good for enterprise for work.
Click to expand...
Click to collapse
I can only assume your "enterprise for work" has nothing to do with KNOX, right? Coz that option would be closed for you now...

CuriosityBrah said:
That occurs because the modem signal cuts out after you switch your phone off, or lock it.
This issue can be resolved by updating our modems, but with our current variant we can't update it yet apparently, until the correct new modem for our specific variant has been released.
Click to expand...
Click to collapse
That odd message not sending was the only issue I've had with this sort of thing; I can still download things, receive messages and calls just fine while my phone is sleeping, how do you know if the modem signal is cutting off? Perhaps it's just a selective thing, not sure. Don't know how to test if it's happening to me because it doesn't seem to be, lol.
opelcalibra said:
I have the optus 9507 and I tried a couple of different kitkat 4.4 roms. They all worked perfectly except for the fact that they lost data completely as soon as the phone went to sleep. the weird thing is, the phone showed 0 bars but i could take calls just fine, just had data issues.
Click to expand...
Click to collapse
Hey mate if you check the forum that I linked to the Knox issue; someone on there posted a fix for sound/WiFi issues post-Knox voiding, maybe that fix'll work for you. Sorry I can't link you to the exact post but it was about 10-20 pages in.
opelcalibra said:
i went back to stock firmware, rooted, ran a debloat script i found on xda, removed a bunch more apps, then unrooted again because i need to run good for enterprise for work.
im getting decent battery life with the debloated stock rom but i would like to move to 4.4 if theres a rom that works. ive been watching the optus and sammobile site hoping there will be a newer modem for the hk version because i think optus will take their time releasing 4.3 for this model.
Click to expand...
Click to collapse
Yeah I reckon they'll take ages, they have pretty much left everyone who's getting this phone in the next couple of months in the dark because of the (as I can tell) severe lack of devs etc in Aus who have Samsung phones and are willing to hack them to the ****. I wish I could help out somehow, but I don't have the time to learn so I figured I'd help out by putting up my experiences. I'm still learning as I go haha.
As for your KitKat problem, I have read that 4.4 didn't do so well in terms of battery life and bloat, what are your reasons for wanting to go to it? I wanted the most recent build also but I figured that if they're still having issues with it then it was better to go with something I knew would work (ie. 4.3.1).
phileasx said:
Thanks for your experience sharing,
I also started with Cyanogen and shared about the same experience.
Just didn't know the Knox thing before I started.. should had read up more before doing it.
So you did the Recovery with Heimdall also? What has made you switch to the customized Rom camp
Click to expand...
Click to collapse
I followed the Windows process on the CM wiki to the letter, so yeah I did the Heimdall also.
Mate legitimately I went from my stock firmware taking up so much space on the hard drive to the real lightweight CM, seeing as I haven't bought a micro SD yet that was a big deal. Also battery life was a major reason for me buying the S4 so to be able to further improve it is just hella.
siganid said:
Hey, no worries at all, anyone who works weekends can take all the time they need...
Yea, I've done some reading also and you're right, it seems to be all conjecture, I really doubt handset warranty refusal can be based on the KNOX Warranty chip. I think the Samsung Enterprise Security Group VP explains it well.Great to hear, based on this I can ge ahead and 'burn out' my eFuse, happy in the knowledge that my Knox warranty has gone to a good cause. :fingers-crossed:
Click to expand...
Click to collapse
In Australia I think we're pretty good. Funny that Samsung and Optus have given us this nice present and it's only a matter of time before someone cracks it open and remains above the warranty voiding
I have read that Knox may be software-based, which would make sense, and maybe it's a matter of time before someone cracks that too. Hehe.
Go ahead, post here if you have any issues and I'll see if I can help you out. What ROM would you be planning on using? A 4.3.x one?

kaiserwatson said:
I followed the Windows process on the CM wiki to the letter, so yeah I did the Heimdall also.
Mate legitimately I went from my stock firmware taking up so much space on the hard drive to the real lightweight CM, seeing as I haven't bought a micro SD yet that was a big deal. Also battery life was a major reason for me buying the S4 so to be able to further improve it is just hella.
Click to expand...
Click to collapse
Welcome to the rom flashing side
After read up more, I realize Odin is a more popular method for Galaxy S4 flashing,
Besides that, Stock rom battery life should also be all right. Samsung did quite some efforts to make the software user friendly.
Anyway, the Bloatware chunk are really irritating have to say.

because i cant keep still i have flashed my phone again lol.
i flashed the official CM 11 (4.4.2) and gapps for kitkat and all is working awesome so far.
no issues with losing signal when going to sleep. seems very fast. right now im happy with it.

Could someone please find new links for the original software posted in the OP?
Links are dead, would be greatly appreciated! =)
Also, Opelcalibra, you have no issues with network/signal on CM 4.4.2 with the Optus i9507?
I better give it a try then lol

RE: Signal issues
Hi,
I also have the AU i9507 Opus S4, I flashed the Omega based 4.4.2 KitKat (i9505 version) and had wifi problems (Greyed out) I tried various fixes and went back to 4.3 based Omega, this had its problems with cell signal being lost when locking the mobile.
I fixed this by going into settings and experimented with mobile networks i.e. Settings, more networks, mobile networks, network mode and tried all 4x options with (for me at least) the GSM ONLY option selected, great rom and worth losing the 4g which is very patchy in my part of Melbourne.
D

Anyone else had any sort of success rooting this phone without tripping Knox.
Also, is it just me, or does it suck pretty hard that we Aussies get stuck with an inferior version of a phone? (Snapdragon 600 in the I9507 vs the 800 in the other international versions)

Update
Hi
Just wondering if anyone has an update on this? Success or otherwise...
One of the main reasons I'm looking to root is to boost volume levels - I find the volume to be way too low. Does anyone know of a way to do that without rooting? Of course I'd like to remove bloatware but could live with it if volume was fixed.
Thanks in advance.

thestuntman80 said:
Anyone else had any sort of success rooting this phone without tripping Knox.
Also, is it just me, or does it suck pretty hard that we Aussies get stuck with an inferior version of a phone? (Snapdragon 600 in the I9507 vs the 800 in the other international versions)
Click to expand...
Click to collapse
Hey bro, no one has cracked without tripping Knox yet because as far as I can tell it's a phone specific fix/hack. So, because our phone is a different and 'rare' model, I doubt that the major heads in the Knox-proofing scene (CF comes to mind) will have the time to make a fix for the knox trip. So for now, either suffer in your jocks (QQ) get a different phone (uh, not likely) or wait for the minute chance that someone actually cares about Aussies )
As for your second point, yeah, it does suck. We get shafted with all sorts of things like prices, release dates, localization...the list goes on. Unfortunately the people who make these ploys know we're desparate and will pay the exorbitant prices anyway :/
jameshef said:
Hi
Just wondering if anyone has an update on this? Success or otherwise...
One of the main reasons I'm looking to root is to boost volume levels - I find the volume to be way too low. Does anyone know of a way to do that without rooting? Of course I'd like to remove bloatware but could live with it if volume was fixed.
Thanks in advance.
Click to expand...
Click to collapse
Hey mate, the rooting was probably the easiest part of the whole situation. You can follow my guide in the OP if you're having trouble. Just be aware about the warranty issues etc because your audio issue may be hardware related rather than software? Is the volume issue in the headphones or the speaker? Some apps may not utilise the phones full volume and also be sure to go into the settings of the phone and make sure the volume limiter is turned OFF. This **** me to tears for the longest time but once I figured out what the issue was, all good!
The only thing I'd say is just make sure its not a hardware issue because you don't want to root your phone, find out that it wasn't a software issue, take your phone into Samsung and have them tell you that your warranty is voided because you rooted. Obviously that's a worse case scenario but just be on the safe side.
I hope I helped you guys!

kaiserwatson said:
Hey mate, the rooting was probably the easiest part of the whole situation. You can follow my guide in the OP if you're having trouble. Just be aware about the warranty issues etc because your audio issue may be hardware related rather than software? Is the volume issue in the headphones or the speaker? Some apps may not utilise the phones full volume and also be sure to go into the settings of the phone and make sure the volume limiter is turned OFF. This **** me to tears for the longest time but once I figured out what the issue was, all good!
The only thing I'd say is just make sure its not a hardware issue because you don't want to root your phone, find out that it wasn't a software issue, take your phone into Samsung and have them tell you that your warranty is voided because you rooted. Obviously that's a worse case scenario but just be on the safe side.
I hope I helped you guys!
Click to expand...
Click to collapse
I'm fairly certain it's a software issue. I've done a fair bit of reading on it and the low volume is a very common complaint about the S4. My volute limiter is turned off - thanks for that tip though!
I'm going to try to root this weekend. I really hope that it works and I don't have any issues with reception dropping when the phone goes to sleep! Feels risky.

I've changed my firmware from Optus to XSA, but am still on 4.2.2, how do I upgrade now?
Kies says I have the latest release.

has anyone got links to newer modem files for this phone? been given one to update it to 4.4, but i know from experience that doing so without at least a 4.4 GSM modem, it wont behave right.
to the people without working wifi after updating: flash the Ktoonz kernel, he has a fix for that.

Hi All,
I recently updated to the new official 4.3 update from optus in order to update my baseband etc.
Then i immediately updated to the i9505 Goldeneye 4.4.2 rom. Ran a ebloat script to get rid of alot of the extras and its running very nicely.
Since updating the modem I get 4g at home which i never did before.
optus rom here
http://www.sammobile.com/firmwares/3/?download=27109
flashed via odin (will lose root and custom recovery). re-root and install recovery after flashing this room.
goldeneye rom here
http://forum.xda-developers.com/showthread.php?t=2313469
obviously this will flag knox, mine was flagged long ao

4.2.2 made the device impossible to use

I'm not even kidding, everything takes a good 10 seconds to open. I can't scroll through settings because it takes 3 seconds to register my swipe.
It's a family members tablet and it has never been rooted, or flashed any custom ROMs. The 4.2.2 update came from Samsung and ever since then they've been complaining to me about how slow it is.
I'm having the same problem when trying to clear the cache through recovery - the dead android and 'error'!
I do NOT want to flash a new ROM because it involves resetting all apps and settings back to how they used to be. The owner hardly has any idea how to use it, so any changes will just freak them out.
Is there anything I can do to fix this thing?

eKulzz said:
I'm not even kidding, everything takes a good 10 seconds to open. I can't scroll through settings because it takes 3 seconds to register my swipe.
It's a family members tablet and it has never been rooted, or flashed any custom ROMs. The 4.2.2 update came from Samsung and ever since then they've been complaining to me about how slow it is.
I'm having the same problem when trying to clear the cache through recovery - the dead android and 'error'!
I do NOT want to flash a new ROM because it involves resetting all apps and settings back to how they used to be. The owner hardly has any idea how to use it, so any changes will just freak them out.
Is there anything I can do to fix this thing?
Click to expand...
Click to collapse
You can root it and then try installing agni kennel from recovery
Sent from my GT-P3100 using Tapatalk

eKulzz said:
I'm not even kidding, everything takes a good 10 seconds to open. I can't scroll through settings because it takes 3 seconds to register my swipe.
It's a family members tablet and it has never been rooted, or flashed any custom ROMs. The 4.2.2 update came from Samsung and ever since then they've been complaining to me about how slow it is.
I'm having the same problem when trying to clear the cache through recovery - the dead android and 'error'!
I do NOT want to flash a new ROM because it involves resetting all apps and settings back to how they used to be. The owner hardly has any idea how to use it, so any changes will just freak them out.
Is there anything I can do to fix this thing?
Click to expand...
Click to collapse
Root it and install an app called seeder .
It makes 4.2.2 super fast ..

Greetings;
Either it was a terrible custom Rom, or you didn't flash it properly.
If you wan't it to work properly consider that you will have to Backup your Applications; their Data and your Contacts as well if they are not syncronized with your Gmail Account.
Perform a "Clean Flash" whenever you Flash a Rom to prevent Issues, and use Odin (for PC - Never Odin Mobile) for such "Clean Flash).
Also Consider Researching Before Doing any Operation you are not familiar with.
What you should try:
0) Backup your Apps & Data;
1) Boot your Device under Recovery;
2) Under Recovery:
- Perform Factory Reset
- Clean Cache
- Reboot into Download Mode
3) Open Odin, under PDA Load you Stock Rom [MD5 file] (to revert your Device Settings to Stock).
4) Under Odin: Considering your Device is Recognized, Press Start.
Do NOT Disconnect USB Cable until Odin Displays "PASS" Message.
5) Reboot into " Download Mode " to Flash ClockWorkMod Recovery or CF-Root (or your Fav. Recovery).
6) Once Completed, Boot your Device into Recovery and Perform " Factory Reset ".
7) Test your System.
Let me know how it went.
Best Regards,
Richard

Any Joy
eKulzz: Did you have any success with the above suggestions? I am in exactly the same boat. I inherited the device (Galaxy Tab 2 10.1 5113 16gig) from a family member. I am not really sure precisely when it started to suck so bad....I am assuming, based on the internet posts, that it happened as a result of the 4.2.2 upgrade. It is taking literally minutes in some cases to load a web page. Flipboard is particularly bad. I have cleared cache, uninstalled or disabled every app the tablet will allow, done a full revert to factory, and nothing works. My wifi throughput goes down to miniscule rates (5, 10 , 15 kbps), although once in a while, for larger objects it will jump up to 5 or 10 mbps....so I know it can do it!). I have done IP traces, thinking it might be my internet provider, but the delays are after the TCP/IP response is returned. It seems to peg the CPU and wander off for 10 or so seconds, and then proceed to do the next TCP/IP request.......so if a page has lots of content, it can take minutes to load.
I am at the point that I either throw it away, try to revert to the original android version the tab was delivered with, or possibly go the other way and instally cyanogenmod, in which case it would be interesting to know the best version of android to install on this device, based on other people's experiences.
It is so amazing that this can happen....and it doesn't seem like an isolated case....the vendor just seems to have effectively bricked a major part of their customer base, and won't admit or do anything about it. You can be sure my next purchase will not be Samsung!
However, in Samsung's defence, almost the same thing happened with my Nexus 7 2012 WIFI tablet. The android 5.1 upgrade has made it almost as bad as the Samsung. I wasted days following threads and screwing around, but only achieved minor gains...it is still not really usable. Again, no mea culpa from Google.... I find it amusing that there is such furore when a new release of android comes out and there is such outrage if peoples devices are not supported, or not upgraded fast enough. My point of view now is that I don't want to see an upgrade on any device I have that is working acceptably.....I think there is such pressure from users for upgrades that the vendors are not testing enough and not asking themselves if the upgrade is actually improving usability for the device....
Rick

Have you tried downgrading?
Go sammobile website, Download the Rom version for your device, and follow the procedures i wrote previously.
(Dont forget to erase cache(s)).
Also check for flash counter. You may need to reset it.
Let me know how it went - with detailed info.
Best regards;
Richard

Tried Downgrade
rgxHost said:
Have you tried downgrading?
Go sammobile website, Download the Rom version for your device, and follow the procedures i wrote previously.
(Dont forget to erase cache(s)).
Also check for flash counter. You may need to reset it.
Let me know how it went - with detailed info.
Best regards;
Richard
Click to expand...
Click to collapse
I gave it a try. Got stymied with the USB drivers. I installed them, but the PC (windows 10) will not recognize the USB device, so Odin does not see the tablet.
I got the drivers from the Samsung web site, and also tried another set, but no luck. I am pretty sure they are the correct drivers...., and were installed successfully, so I am not sure whether it is a Windows 10 thing or a driver problem. The PC sees the device when you plug it in and remove it, but reports it as an unrecognized device. I tried re-booting the PC, just in case.
Anyway....it has pretty well stopped me in my tracks.
Rick

Update
Rickster22 said:
I gave it a try. Got stymied with the USB drivers. I installed them, but the PC (windows 10) will not recognize the USB device, so Odin does not see the tablet.
I got the drivers from the Samsung web site, and also tried another set, but no luck. I am pretty sure they are the correct drivers...., and were installed successfully, so I am not sure whether it is a Windows 10 thing or a driver problem. The PC sees the device when you plug it in and remove it, but reports it as an unrecognized device. I tried re-booting the PC, just in case.
Anyway....it has pretty well stopped me in my tracks.
Rick
Click to expand...
Click to collapse
Update: Tried installing the USB drivers from Samsung on a 32 bit windows XP netbook I had lying about. Same result. The tablet is reported by the OS as an "unrecognized device" when I plug it in, and Odin does not see it.
I guess it could be my cable....but it is the only one I have, and since Samsung uses a non standard cable, I would have to buy a new one to find out. I definitely am not going to do that....talk about good money after bad. I have spent about 10 hours on this.
Interestingly, I ran into a guy at a party last night that is experiencing the same slowness on a galaxy tab 2 7" . Seems too coincidental! We were wondering if it could be related to slow SD ram with bad memory locations degrading over time, and possibly a change in android 4.2.2 garbage collection or memory management.
I think the outcome of this is that Samsung is an undependable vendor, that I don't want to invest any more time or money in. No future product I purchase will be from them.

Rickster22 said:
Update: Tried installing the USB drivers from Samsung on a 32 bit windows XP netbook I had lying about. Same result. The tablet is reported by the OS as an "unrecognized device" when I plug it in, and Odin does not see it.
I guess it could be my cable....but it is the only one I have, and since Samsung uses a non standard cable, I would have to buy a new one to find out. I definitely am not going to do that....talk about good money after bad. I have spent about 10 hours on this.
Interestingly, I ran into a guy at a party last night that is experiencing the same slowness on a galaxy tab 2 7" . Seems too coincidental! We were wondering if it could be related to slow SD ram with bad memory locations degrading over time, and possibly a change in android 4.2.2 garbage collection or memory management.
I think the outcome of this is that Samsung is an undependable vendor, that I don't want to invest any more time or money in. No future product I purchase will be from them.
Click to expand...
Click to collapse
Your guess is right, that's the cable issue, I have changed 3 cables already for my tab 2. I bought a cheap USB cable, and that worked same like the original one.(not suggesting you do the same)
Now, about the slowness, it's an every user issue who are on stock rom, yes, Samsung messed up things with ics/jb and a cheap emmc, but you can stop it before the bug hits the stock user and make the tab a hard bricked tab. few users have reported this already. they were on stock, never went custom, still their devices started slowing and eventually bricked or worse, rendered a read only device.
it's that time already, when I would want to see every tab user who are running on stock to take their tabs in their hands and start flashing the custom rom before the tab hits the brick. Good Luck

billysam said:
Your guess is right, that's the cable issue, I have changed 3 cables already for my tab 2. I bought a cheap USB cable, and that worked same like the original one.(not suggesting you do the same)
Now, about the slowness, it's an every user issue who are on stock rom, yes, Samsung messed up things with ics/jb and a cheap emmc, but you can stop it before the bug hits the stock user and make the tab a hard bricked tab. few users have reported this already. they were on stock, never went custom, still their devices started slowing and eventually bricked or worse, rendered a read only device.
it's that time already, when I would want to see every tab user who are running on stock to take their tabs in their hands and start flashing the custom rom before the tab hits the brick. Good Luck
Click to expand...
Click to collapse
Thanks very much for your feedback....nice to know I am not alone, and not losing it! If it is happening to all Samsung Tab 2 users, and the product is basically destined to become useless after a few years of use, and Samsung did not warn users of this limitation when they purchased.....seems like the kind of thing class actions are made of!
As a newbie, I would like to clarify your comments a bit to make sure I end up doing the appropriate thing. When you say that every Tab user should start flashing the custom ROM, I assume you are not talking about the Samsung provided ROMS for 4.1.1 (P5113UECLK7_P5113XACCLK7_XAC) or an updated Samsung 4.2.2. It sounds like doing that will not resolve the issue. Are you talking about Cyanogenmod? and if so, what version of Cyanogenmod and Android OS would be appropriate? .........I wouldn't mind giving it one more kick at the cat, if someone knowledgeable says there is a little glimmer of light at the end of the tunnel!
Thanks for your assist!
Rick

Rickster22 said:
Thanks very much for your feedback....nice to know I am not alone, and not losing it! If it is happening to all Samsung Tab 2 users, and the product is basically destined to become useless after a few years of use, and Samsung did not warn users of this limitation when they purchased.....seems like the kind of thing class actions are made of!
As a newbie, I would like to clarify your comments a bit to make sure I end up doing the appropriate thing. When you say that every Tab user should start flashing the custom ROM, I assume you are not talking about the Samsung provided ROMS for 4.1.1 (P5113UECLK7_P5113XACCLK7_XAC) or an updated Samsung 4.2.2. It sounds like doing that will not resolve the issue. Are you talking about Cyanogenmod? and if so, what version of Cyanogenmod and Android OS would be appropriate? .........I wouldn't mind giving it one more kick at the cat, if someone knowledgeable says there is a little glimmer of light at the end of the tunnel!
Thanks for your assist!
Rick
Click to expand...
Click to collapse
Yes, I meant Custom ROM(cynogenmod) and not stock official builds as they have fixed the trim related problem present with the old stock official ROMs, that's causing the slow downs and eventually causing the tab emmc card to die.
Check here for this emmc bug
http://wiki.cyanogenmod.org/w/EMMC_Bugs
that's one reason, cheap emmc is second (although both users have been hit with the emmc bug but c'mon a person who had never rooted or flashed a custom ROM on his tab ever got hit with this was very disappointing for stock users)
If you check other threads in help and troubleshoot you will see numerous users on stock having more brick issues than the custom ROM users. I have been here from long and have been watching over on all the issues. both have equal share of risks.
See this case here too
http://forum.xda-developers.com/galaxy-tab-2/help/gt-p3100-boot-loop-recovery-information-t3307456
So, if you're planning to choose custom ROMs, take a tour of the General sections for guides and Android development section for ROMS.
Most of the ROMs of our TAB 2 developer Android-Andi, CCD and tuxafgmur are fine and near stable(with updates) (don't go below KK versions)