Support for i9305 kenrel has been stopped...
If you're looking for i9300 kernels, check this thread.
Yank555.lu kernel for GT-I9305
Changelogs and Downloads :
Samsung ROMs
AOSP / AOKP / CM10.x
(Android 4.2.x & 4.3)
Original Port by @ausdim, thanx a lot for making this first step
--------------------------------------------------------------------------------------------------------------------------------
Yank555.lu kernel v3.3 ported for GT-I9305.
!! This kernel is intended for Samsung based ROMS !!
The kernel is recompiled with the required changes so it will work on our I9305.
Removed:
CMA device memory allocation.
Edited boeffla sound drivers 1.6 (Because 1.6 didn't work like 1.4.9 but i whaiting Andip to look at that)
The port and tests made by me and only me.
Please for any questions problems or anything else ask here and not on I9300 thread.
All credits for that kernel goes to Yank555 for the work and updated sources also for allow me to release that port.
And also AndreiLux for help me understund a lot of thinks about compiling.
Boeffla sound app:
https://play.google.com/store/apps/details?id=com.near.boefflasound
Thank's
Changelog (copy pasted from yank):
Changelog v3.3
Samsung JB Update 8 sources (Linux 3.0.31)
updated to kernel.org Linux 3.0.67 (proper update, including 3.0.39 memory management changes)
swap support
zram support (Android optimized)
/proc/config.gz support
optimized for size
ntfs (rw) support (as a kernel module)
ISO 9660 support incl. Joliet filesystem (as a kernel module)
UDF filesystem support (as a kernel module)
cifs support (as kernel modules)
nfs support (as kernel modules)
Forced Fast Charge v1.2b
CPU OC up to 1.6GHz
Triangle away support
dynamic fsync support (faux123)
TCP westwood congest ctrl (faux123)
Proportional Rate Reduction TCP (faux123)
ARM AES/SHA1 (faux123)
JIT compiler for packet filters(faux123)
fix ipv6 protocol lookup (faux123)
ipv4 check ret.val. dst_alloc (faux123)
ipv6 check ret.val. dst_alloc (faux123)
updated LZO compression (faux123)
do_fsync() to fget_light() (faux123)
disabled mali state tracking (AndreiLux)
reduce mali utilization sampling timeout (AndreiLux)
black crush fix (AndreiLux/AndiP71)
added SIO scheduler
added ROW v4 scheduler
fading LED notification with normal or high LED intesity
staging: android: lowmemorykiller: Add config option to support oom_adj values (Arve Hjonnevag, via faux123)
sysfs interface to delay fsearlysuspend (Yank555.lu, base idea Codeworkx)
added lulzactiveq CPU governor
added yankasusq CPU governor
removed ondemand, userspace, powersave, performance governors (not optimised for quadcore anyway)
Boeffla-Sound: Engine 1.6.0 (AndiP71) - Huge thanks for offering me to include his hard work and great sound engine.
Click to expand...
Click to collapse
Source code for v3.3
We must give you an Oscar for all your ports; thanks a lot mate, i'll test it later and report if there's any bug.
Rgds
AW: [Kernel][GT-I9305][Samsung Update 7][3.0.64] Yank555.lu kernel v3.2 ported!
Finally rocking this awesome kernel. I loved it on my i9300. Thanks for porting it!
Sent from my GT-I9305 using xda premium
The core is very good! The versatile options suitable I used.:good:
ausdim you've done it again
Now please forgive me for this lame question, but what are some of the main features / benefits of running this kernel?
I noticed the Boeffla app, is this something similar to the old Voodoo on SGS1?
Re: [Kernel][GT-I9305][Samsung Update 7][3.0.64] Yank555.lu kernel v3.2 ported!
Waiting for more test from you friends!
Samsung Galaxy SIII GT-I9305 Lte.
Re: [Kernel][GT-I9305][Samsung Update 7][3.0.64] Yank555.lu kernel v3.2 ported!
djb77 said:
ausdim you've done it again
Now please forgive me for this lame question, but what are some of the main features / benefits of running this kernel?
I noticed the Boeffla app, is this something similar to the old Voodoo on SGS1?
Click to expand...
Click to collapse
The settings are all explained here :
http://forum.xda-developers.com/showpost.php?p=33135949&postcount=3
If there are further questions, I'll follow the tread and try to help out best I can.
JP.
Sent from my Sotmax V15 / Yank555.lu SGS3 U7 kernel v3.2a-beta Aroma (Linux 3.0.66) powered Galaxy S3 i9300 using Tapatalk 2
Yank555 said:
The settings are all explained here :
http://forum.xda-developers.com/showpost.php?p=33135949&postcount=3
If there are further questions, I'll follow the tread and try to help out best I can.
JP.
Sent from my Sotmax V15 / Yank555.lu SGS3 U7 kernel v3.2a-beta Aroma (Linux 3.0.66) powered Galaxy S3 i9300 using Tapatalk 2
Click to expand...
Click to collapse
Thank's for support
Link added to first post.
Just read over the settings for the kernel, damn there's a lot to it, very impressive
I might flash it today and give it a test drive.
AW: [Kernel][GT-I9305][Samsung Update 7][3.0.64] Yank555.lu kernel v3.2 ported!
Thx....worx great
Sent from my GT-I9305 using xda premium
installed using twrp everything works fine
Before installing don't forget to delete before script kernel.
The installation was successful, running for 9 hours is normal.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
kinmach said:
Before installing don't forget to delete before script kernel.
The installation was successful, running for 9 hours is normal.
View attachment 1764209
Click to expand...
Click to collapse
Sorry, what do you mean :"Before installing don't forget to delete before script kernel"?
I installed this kernel in Liquid Smooth 2.1 ROM, instalation successful but in the "About phone" there is no change?
Re: [Kernel][GT-I9305][Samsung Update 7][3.0.64] Yank555.lu kernel v3.2 ported!
dejan_mik said:
Sorry, what do you mean :"Before installing don't forget to delete before script kernel"?
I installed this kernel in Liquid Smooth 2.1 ROM, instalation successful but in the "About phone" there is no change?
Click to expand...
Click to collapse
This kernel support cm ？i
Sent from my GT-I9305
Re: [Kernel][GT-I9305][Samsung Update 7][3.0.64] Yank555.lu kernel v3.2 ported!
keltonfan said:
This kernel support cm ？i
Sent from my GT-I9305
Click to expand...
Click to collapse
No, this is based on Samsung sources, so for Samsung TW ROMs only.
JP.
Sent from my Sotmax V15 / Yank555.lu SGS3 U7 kernel v3.2a-beta2 Aroma (Linux 3.0.66) powered Galaxy S3 i9300 using Tapatalk 2
Hi,
If I want to change some of the settings that I made in the installer how do I do it without having to boot into recovery and start the process again? I want to change the USB Fast Charge setting, ive downloaded System Tuner but I cant find anything about USB/Charging on there.
Many thanks.
Coveman said:
Hi,
If I want to change some of the settings that I made in the installer how do I do it without having to boot into recovery and start the process again? I want to change the USB Fast Charge setting, ive downloaded System Tuner but I cant find anything about USB/Charging on there.
Many thanks.
Click to expand...
Click to collapse
Sorry, those few settings you really can only control in Aroma, or you would need to go in a terminal and issue a few echo commands...
JP.
Cant flash!
Hi!
I´m trying to flash this kernel on to my I9035N wich is running pandorium 6.6 ROM with perseus kernel. I can make the choises i want in Aroma but when its time to flash i get different messages telling that something went wrong and there is no flash. So I´m stuck with perseus.
I´ve tried numerous times with different settings and and also tried to wipe and do factory reset with no result.
I´ve dowloaded several times and checked mdsum, it´s allways the same number (there´s nothing to compare to in the tread?) wich lead me to think that i´ve got clean dowload.
Please help, what am I missing?
/sarc
sarcosian said:
Hi!
I´m trying to flash this kernel on to my I9035N wich is running pandorium 6.6 ROM with perseus kernel. I can make the choises i want in Aroma but when its time to flash i get different messages telling that something went wrong and there is no flash. So I´m stuck with perseus.
I´ve tried numerous times with different settings and and also tried to wipe and do factory reset with no result.
I´ve dowloaded several times and checked mdsum, it´s allways the same number (there´s nothing to compare to in the tread?) wich lead me to think that i´ve got clean dowload.
Please help, what am I missing?
/sarc
Click to expand...
Click to collapse
I'm shooting in the dark here, but sometimes recoveries don't clean up the cache partition and Aroma uses it to store your choices.
Give formating cache (not dalvik cache !) a try when you go into recovery. Do that prior to flashing the kernel.
JP.
Related
this is my compiled kernel, builded from samsung source code (GT-S5360_GB_Opensource_Update2.zip). please read this whole post before you install this kernel in your device and don't expect something "WOW" from this kernel since its only my kernel for my daily usage.
the main interest of this kernel is to build a kernel which:
1. compatible to all rom (custom n stock)*.
2. simple, light, yet still customizable
3. save more batteries
4. decent performance
if you're looking for a kernel as described above, then this thread will give what you want.
the link :
Click to expand...
Click to collapse
special built kernel with a2sd full support -- for advance user
note: clearly stated for advance user. don't ask me why it didn't boot up in your rom.
Click to expand...
Click to collapse
basic feature:
1. init.d script support
2. Advance Power Management enabled (not 100% working but it solve the screen issue)
3. built in droidwal support and bacem tweak
4. 4 freq
5. a few more gov and io sched
how to: flash the file via CWM.
credits:
1. irfanbagus for the patch and bacem tweak
2. savie for the help for 4 freq
3. marcotoo for the nice discussion about kernel on his thread and the solution for deep sleep from his patch thread.
4. harish for the tools
5. maroc aka yahya, edoko, tegrak, sdadier, droidzone @github for source code
6. last but not least you...for support and nice development atmosphere here. keep follow the rules guys.
TERM OF USE AND SHARING:
this thread intent is for sharing. feel free to use, edit, distribute all material inside this thread which came from me. if there any parts of this mod which comes not from me please refer to the original dev I've mentioned in this thread. if want to share it to another forum or modify it you don't have to ask my permission. no need to credits, put links or whatsoever. you'll only need to remember that you should held all the responsibility by using this mod, modify it or distribute it. DO IT WITH YOUR OWN RISK
Click to expand...
Click to collapse
IMPORTANT NOTES:
1. please don't ask anything about CWM. I prefer to never put it on my kernel.
2. trying to fix the 3rd freq but still no luck. we have 312-x-624-832 freq but the (x) freq is still buggy and imperfect. I think we need some help to fix it. already tried with 416, 442, 468, 520 but the bug is still there.
3. sorry, no a2sd support at this moment. you can use dsixda's kitchen or harish's tools to build a kernel with repencis's ramdisk to make this kernel support a2sd by yourself. the good thing is that your a2sd will work but it will also make your device boot (a lot) longer. I prefer to not use it on my kernel since I never use a2sd.
4. I give you three 'cats' gov in this kernel
powercats = lazy --> performance
blackcats = smartassv2 --> balanced setting
activecats = intellidemand --> battery saver
they have been tweaked and renamed just to make you easier when choosing the govs.
5. if you have a2sd running in your device, please uninstall it before installing this kernel. or else, you'll get bootloop
changelog
v0.1 :
first released version
v0.2 :
- swap
- ext4
- more iosched
- optimized conservative for battery saving
- ciffs (not really needed but it will be usefull if someone might want to use it)
v0.3 :
- new freq configuration (312-468-624-832). less sudden jumped out freq from 312 to 624 but it still imperfect yet.
- new govs, wheatley removed. now conservative is set as default for battery saving option.
- configured iosched, sio as default.
- now it use a part of koneu patch to fix deep sleep problem
v0.4 :
- minor tune on the kernel source and configuration
- as requested, OTG stuff added**.
v0.5:
- minor tune on battery management
- tun.ko build in
- few sound API and driver added
- as requested, NTFS modules built in
v0.5.1:
- lil bit tuning. trying to fix ntfs problem
- KSM for page merging support
- HID support
v0.5.2:
- alternate version of 0.5.1 without any OTG related stuff
v0.6.9:
- 6 frequencies
- setting for conservative and blackcats modified to match the new freqs.
v1:
- 5 frequencies. 780mhz almost never used so I removed it (468 is a buffer to prevent the freq suddenly jump to max freq. it actually working at 312mhz)
- HID driver removed (you don't even know what it is)
- few API removed for lightweightness
- CIFS removed since almost no one use it.
- deepsleep bug from v0.6.9 fixed
- screen problem fixed (never happened on mine but need report from users)
- battery APM
v1.1
- black screen bug fixed
* CM is not supported. sorry.
** OTG stuff still untested. the driver and NTFS modules required is inside it but I don't have the equipment to test it.
Click to expand...
Click to collapse
IMPORTANT STUFF: INCOMPATIBILITY ISSUE REPORT
# DXLF deodexed ROM (reported count: 1)
reason : error due to tweak inside it. already fixed.
please report here if you find my kernel doesn't boot. specify your system in details like : the rom, tweaks, a2sd/non a2sd, kernel version. I'm trying my best to make this kernel compatible with all rom (except CM). all kernel kernel here is already tested in my device before I uploaded it. however, my work might not perfect yet so that it might won't boot in several ROM.
Click to expand...
Click to collapse
kernel source link: http://www.mediafire.com/?bgh79kbcof9jctf (it only contain the modified files. you need to download the whole source code from samsung at opensource.samsung.com. I'm using update 2 for european region).
Finally
BTW Freq,Governors,IO working?
Will test now
Edit : Sio not included, noticed Speed in booting, nice Kernel, expecting more, but not too much..LOL
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
its actually already uploaded several days ago (lol)
yeah finally
this not support dualboot it mean support a2sd, right ?
reserved..
Sent from my GT-S5360 using xda premium
@ron: why don't you try to build your kernel. you already on linux, don't you?
kurotsugi said:
@ron: why don't you try to build your kernel. you already on linux, don't you?
Click to expand...
Click to collapse
yes, i was on ubuntu 12.04, but i recently formatted my PC to Windows since i need it for school for my class presentations, i have a lot of work and i also need it for my part time job, so basically ubuntu was eating space, so switched to windows for a while, will be going back to ubuntu next year after graduation:highfive:
Noticed that frequencies 416 is rarely used
from 312 it jumps to 624 and rarely on 416..observation only, will test more
yup...416 is tend to not stable and it easily jumped out to 624. thats a bug from 4 freq mode using 0x0d. it can solved but we should underclock it too 104. its not a good option for me.
Wow downloading!!!!!
Sent from my GT-S5360 using xda premium
@ kuro, does it supports A2SD? nice kernel buddy. :good::good:
Ha! finally..
Great job my friend.
sent while doin' some burnouts
Benchmark for 416 MHz? How did you manage to fix the incapability of the CPU to reach that frequency?
kurotsugi said:
this is my compiled kernel, builded from samsung source code. please don't expect something wonderfull from this kernel since its only my kernel for my daily usage.
feature:
1. init.d script support
2. Advance Power Management enabled
3. built in droidwal support and bacem tweak
4. 4 freq
5. a few more gov and io sched
how to: flash the file via CWM.
credits:
1. irfanbagus for the patch and bacem tweak
2. savie for the help for 4 freq
3. marcotoo for the nice discussion about kernel on his thread
4. harish for the tools
5. edoko, tegrak, for source code
6. last but not least you...for support and nice development atmosphere here. keep follow the rules guys.
PS: please don't ask anything about CWM. I prefer to never put it on my kernel.
Click to expand...
Click to collapse
Reserved master...
Sent from my GT-S5360 using xda app-developers app
@marco: that freq isn't fixed yet. the benchmark and bogoMIPS score tend to give unstable value between 416 and 624. I think the freq for 0x0d isn't 416. it might a lil bit higher than it.
You could try 520…
Awesome. Flashing right away. Kuros stuff is always awesome. Was expecting this kernel. Thanks man
@marco: yup...I'll try that later. now I'm stil experimenting with something else.
@hitme: this kernel only give some basic stuff. it can't be compared to maroc's, repencis's, savie's or marco's kernel.
kurotsugi said:
@hitme: this kernel only give some basic stuff. it can't be compared to maroc's, repencis's, savie's or marco's kernel.
Click to expand...
Click to collapse
Thats exactly what I want. I dont use a2sd/swap and dont like ext4 auto mount. Was using rev54 savies till now as it has the exact one. Used rev 60 v2 for some time(it had ext4, inbuilt CWM etc) but it was draining battery some what since it got ext4 and inbuilt CWM etc. I need a kernel which is light, fast, battery saving and I only want droidwall. So this one exactly suits me
As far as CWM is concerned, as we can flash the same with just two clicks why so much rush to integrate to kernel? Its best not included imo
this kernel is already support swap and ext4 partition. I never used it but I think it will be usefull for someone who might want to use it. I'm still testing several stuff with the gov here and io sched here. got some interesting gov but it doesn't work at this moment. I'll upload it when I finished with this one.
EDIT: this kernel was my last stable kernel built. I can't clearly remember all stuff inside it. can you tell me the govs inside it?
Hmm then this isn't a basic kernel just flashed it and looks good. I'll give my detailed report later
[CM10/ICS/MIUI][KERNEL][GPL][rc-3] ♫♫ Titanium.Kernel ♫♫ An All in one Kernel! ♫
Whats up guys!
So.. you'll already know me
SO no Introductions.
For those who don't know me, I am a Kernel Developer, Check the links in my signature to see my work
Now.. Getting back to topic!
Presenting.........
★★★ Titanium Kernel for Galaxy R - GT-I9103 ★★★
Remember,
Code:
[B]/* DISCLAIMER */ [/B]
[SIZE="5"][FONT="Arial Black"][COLOR="Red"][U]I do not own the device![/U][/COLOR][/FONT][/SIZE]
[COLOR="Red"][B][FONT="Arial Black"]You are choosing to make the modifications at your own risk.[/FONT][/B][/COLOR]
This Kernel is for Samsung ICS ROMs or any ROM based on Samsungs stock ROMs.
★ What my Kernel is made up of ★
★ This Kernel will work on every ROM, look into Downloads section and select your Kernel. ICS Kernel will work on Angeeks ROM
eMMC Brick bug cleaned up.
Based on Samsung ICS Update 2 Sources
Compiled with Linaro 4.6.2 toolchain
Overclock upto 1.2 Ghz
GPU Overclock upto 410 Mhz
All Linux memory Management Parameters tuned up for best performance.
Optimized ARM RWSEM Algorithms.
ARCH Power Enabled
JRCU (Joe's RCU, best suited for small SMP Systems!)
Proportional Rate Reduction for TCP by Google.
RAM Console Debugging Removed (More RAM)
Reclaimed RAM from Android Logger(logcat) (More RAM)
RAM Hack based on my old GB Kernel patch(+56 MB)
Voodoo Sound
Enabled NTFS Filesystem
Auto Brightness Fixes (ardatdat)
TCP/IP Tweaks
XZ Compression for Kernel (++speed,--size)
Using SLUB Memory Allocator (I always prefer this!)
Unneeded Stuff cleaned up in defconfig
EXT4 is default, EXT4 is used for mounting EXT2 and EXT3 (Faster)
NOATIME NODIRATIME Mounts set as default
Governers: Hotplug, Smartass2, Performance, Ondemand, Conservative.
IO Schedulers: Noop and CFQ (Default)
..
ROW IO Scheduler
BLN Support w/ liblights loaded from ramdisk
WIFI MAC Address Changing support
Lots of Makefile Optimizations + GCC 4.6 Optimizations
Dynamic FSYNC Control (faux123)
Stochastic Fair Blue Net Scheduler
Optimised swahb32() byteswap helper
Code cleanups done where necessary
IO Patches
TUN/TAP Driver built in
--
Cleancache Support
KSM Enabled
Disabled unnecessary drivers
LZMA Compressed Ramdisk (--size)
N1 Board and Touchscreen driver fully cleaned up of all Samsung **** ups and warnings!
Lots more stuff! Flash and see for yourself.
Ramdisk Mods:
Auto-root (SuperSU)
BLN Liblights loaded from ramdisk itself
Auto-EFS Backup
init.d scripts run on boot
Custom Bootanimation support (ICS ROM)
Other misc stuff.
TODO:
[*]Fix all Kernel warnings and crap samsung code.
[*]Get rid of TEGRA CPU LOCK.
[*]Set up Custom Voltage sysfs.
[*]Fix all game lags.(Which is present on stock Samsung sources and ROMS)
[*]Port some more Tegra specific mods from other Tegra devices.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
★ I plan to contribute a lot to this Kernel in the near future! Test it and let me know. ★
★ Also, I plan to clean up lots of Samsung **** code and **** ups in the source ★
★ Remember, I do not have the device so it will take me time to fix up bugs (If there are any) ★
Credits ,
☑ Many of the patches on my source which I have incorporated may not be programmed by me, I have credited them on my github.
☑ Adam77Root, ardatdat (Kernel patches, credited on my github)
☑ faux123
☑ parmarket,shaheen(For testing this first on their phone)
☑ and MEEEeeee .. of course!
Changelogs
Code:
[B]Kernel rc-1[/B]
Initial Release
[B]Kernel rc-2[/B]
CM10 Support
AOSP Vibrator fix
KXTF9 Sensor driver for CM10
BLN Support w/ liblights which will be loaded by ramdisk
Enabled Wifi MAC Address Changing ability
Makefile Optimizations
SYNC Frameworks and SW Sync
XZ Compression for Kernel
ARM CPU Topology
Dynamic FSYNC Control (faux123)
ROW IO Scheduler ~Enabled by default (Meant for mobile devices)
Added ARM NET JIT Compiler
Add optimised swahb32() byteswap helper
Lots more stuff, too technical to explain, check my github.
[B]Kernel rc-3[/B]
---COMING UP-----
Stability fixes, fixed hangs,lags from rc-2.
Lots of Code Cleanups for better optimized code!
Board-n1 cleaned up of all warnings
Atmel MXT-224E driver cleaned up of all warnings.
GCC 4.6 (Linaro) Optimizations
MIUI Support
Reverted SYNC,SW_SYNC,ARM NET JIT Compiler (Will have to do testing!)
Enabled KSM
Enabled CLEANCACHE
Disabled a lot of unnecessary drivers to reduce memory footprint in Kernel.
LZMA Compressed Ramdisk (--size)
Bumped reserved memory to 200MB
Asynchronous I/O latency to a solid-state disk greatly increased (cherry-picked)
Downloads
Download: Titanium Kernel rc-3 - ICS
Download: Titanium Kernel rc-3 - CM10
Download: Titanium Kernel rc-3 - MIUI
-------- OLD VERSIONS NOT RECOMMENDED! -------------
Download: Titanium Kernel rc-2 - ICS
Download: Titanium Kernel rc-2 - CM10
Download: Titanium Kernel rc-1
FAQ's
FAQ:
1) Do not use 3rd party init.d scripts! If you wish to use any ask in the thread. I will tell you if you can.
2) How to flash the Kernel?
A: Flash the zip via CWM ... duhhh! :victory:
3) Why only 4 governers ?
A: Too many Governers bloat the Kernel, many are quite similar.
Best Governer for Battery: Conservative
Best Governer for Performance: Smartass2 or Performance
4) Can you add support to turn off one cpu core?
A: You don't need to do it manually, Hotplug governer knows when to turn off one core.
5) Will you overclock more?
A: No, 1.2 Ghz is enough. We wan't stability and not problems.
6) I got X bug, I got Y bug.
A: I will fix it, recreate the problem and give me a logcat. Remember, it may take time and testing to fix a bug since I do not have the device.
7) Will this support CM in future?
A: Ofcourse! I will also be helping in CM development soon.
8) My phone does not enter deep sleep.
A: Some app is constantly waking up your phone.
9) DO NOT USE ANY SET CPU PROFILES! .
A note on How-to report bugs.
Great one buddy. Unfortunately over CM10. will b waiting for CM10 kernel. thanks again.:fingers-crossed:
Great work Buddy :good:. Cud u add the stopbootanimation service at end of script in init.rc so that v can use this kernel for custom bootanimation.:highfive:
thanks
thanks buddy, nice work, all feature sounds great :good:
I particularly like of have only 4 governers which is simple and useful , too much confuse most of the time. :laugh:
thanks again and keep it up :good:
I wish u had kept interactive governer. Anyways, will try this after college.
Sent from my GT-I9103 using xda app-developers app
kataria.vikesh said:
Great one buddy. Unfortunately over CM10. will b waiting for CM10 kernel. thanks again.:fingers-crossed:
Click to expand...
Click to collapse
Will add CM support post the CM10 boot.img here.
selva.simple said:
Great work Buddy :good:. Cud u add the stopbootanimation service at end of script in init.rc so that v can use this kernel for custom bootanimation.:highfive:
Click to expand...
Click to collapse
Yeah, can do it. Will build my own ramdisk in the next release.
gitanshu said:
I wish u had kept interactive governer. Anyways, will try this after college.
Sent from my GT-I9103 using xda app-developers app
Click to expand...
Click to collapse
I will drop ondemand and add interactive, Interactive governer is an improved version of ondemand.. anyways.. this is first release ... lots to come still!
will it work on angeeks rom??
kunaal2580 said:
will it work on angeeks rom??
Click to expand...
Click to collapse
No. Currently this does not support custom boot animation which if u flashed on angeek's rom will result in bootanimation loop.
Adi_Pat said:
Will add CM support post the CM10 boot.img here.
Click to expand...
Click to collapse
Edit: here is the link of cm10 kernel
http://db.tt/lrOpqrxL :victory:
kataria.vikesh said:
Edit: here is the link of cm10 kernel
http://db.tt/lrOpqrxL :victory:
Click to expand...
Click to collapse
Gimme a few mins, making it CM Compatible , just need to pack teh ramdisk with my Kernel .. (Hopefully nothing more, someone will have to test it)
kataria.vikesh said:
Edit: here is the link of cm10 kernel
http://db.tt/lrOpqrxL :victory:
Click to expand...
Click to collapse
Does it have bln mod?
Sent from my GT-I9103 using Tapatalk 2
Benchmarks
these are some benchmarks of this Kernel (With Geeky Engine)
CPU speed 1Ghz
Governer: smartass2
CPU speed 1.2Ghz
Governer: smartass2
Good work! Waiting for the anti boot loop kernel support for the angeeks ROM.
Enviado desde mi GT-I9103 usando Tapatalk 2
@Adi_Pat: To make the kernel compatible with CM10, do the followings:
1. Implement vibrator fix. (https://github.com/epsylon3/android...mmit/720914d5009039d3ba9898361eea1ad8ab09d326)
2. Add raw KXTF9 accelerometer sensor. (https://raw.github.com/epsylon3/android_kernel_samsung_i9103/gingerbread/drivers/input/misc/kxtf9.c Put it into drivers/sensors, modify Makefile and KConfig accordingly and enable it in defconfig.)
3. Take the ramdisk.
You don't have to compile two different kernels for the two roms, only change the ramdisk. The kernel works quite well in hybrid mode with the modifications included.
Also, if you have time please include these patches into your kernel. I'd really appreciate them. Thanks!
Adam77Root said:
@Adi_Pat: To make the kernel compatible with CM10, do the followings:
1. Implement vibrator fix. (https://github.com/epsylon3/android...mmit/720914d5009039d3ba9898361eea1ad8ab09d326)
2. Add raw KXTF9 accelerometer sensor. (https://raw.github.com/epsylon3/android_kernel_samsung_i9103/gingerbread/drivers/input/misc/kxtf9.c Put it into drivers/sensors, modify Makefile and KConfig accordingly and enable it in defconfig.)
3. Take the ramdisk.
You don't have to compile two different kernels for the two roms, only change the ramdisk. The kernel works quite well in hybrid mode with the modifications included.
Also, if you have time please include these patches into your kernel. I'd really appreciate them. Thanks!
Click to expand...
Click to collapse
Thanks! Sure I will. Will merge your patches soon.
Still studying the source.. looks like lots can be improved!
Super cool.. awesome kernel..
Working great.. thanks
Sent from my GT-I9103 using xda premium
parmarket said:
these are some benchmarks of this Kernel (With Geeky Engine)
CPU speed 1Ghz
Governer: smartass2
CPU speed 1.2Ghz
Governer: smartass2
Click to expand...
Click to collapse
Hi Ketan, Are you using Adi's kernel on miui rom? or CM10? was curious if it works fine on Paraj's miui rom.
I was getting bored. And thought of playing around with the old 2.6.35 Source.
Have been using this Kernel for a week now, for personal use mainly. Thought of releasing it so that you guys can use it till our Linux 3.x Project is complete.
I thought of giving you guys some contributions from my side, and keep developments active while I work on Linux 3.0 with dhiru..
Presenting, my new Kernel, based on 2.6.35 source by samsung , which was modified by dhiru1602 for functionality on CM10.
Experience increased Smoothness on your i9003 !!
Will work only on CM10 Alpha 4 and all CM10 Alpha 4 based ROMS.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FEATURES
Updated GPU Drivers! (Smoothness+++)
Compiled with Linaro Toolchain GCC 4.7.
Updated Interactive Governer from Linux 3.x
Optimized Battery Driver (Built in) - IoSconiscuito
Disabled Debugging stuff for a faster Kernel.
Stock Frequencies Undervolted for Better Battery.
Optimized CRC32 Algorithms.
Cleancache.
Compiler Optimizations.
Tuned up VM Ratios.
Fixed loads of Samsung Derps and Section Mismatches.
Network Fix.
Removed all CRAP SAMSUNG DEBUG!
Added CFS Autogroup (++Multitasking)
Backported DSSCOMP.
Reduced LOG size.
ARM: Add optimised swahb32() byteswap helper for v6 and above
Fixed gpt12_fck clockdomain warning.
XZ Compressed Kernels.
SLUB Memory Allocator (Better than the SLUB -> Default)
Governers: Interactive,Conservative,Performance,Ondemand,SmartassV2
IO SCHEDULERS: SIO,VR,BFQ,CFQ.
Cleancache, KSM Enabled.
TUN/TAP and CIFS Built-in
Lots more! Flash and see for yourself!!
Some more selective patches from upstream and other repos.
INSTRUCTIONS TO FLASH-
Flash CM10 Alpha 4.
Download the Zip file from the link in the Downloads Section.
Reboot into Recovery Mode.
Select Zip, install. (**** you samsung )
Wipe Cache,Dalvik Cache and Battery Stats.
Enjoy.
Credits-
dhiru1602 (For all the advice,guidance and support!)
HetalK (For all the motivation,support and UART!)
Sakindia123 (For encouraging me to build my first Kernel)
bangalorerohan
gokhanmoral
simone201
Changelogs
CHANGELOGS
Code:
[B][COLOR="Red"]SIRI KERNEL-[/COLOR][/B]
[U][B][COLOR="DarkRed"]RC- 1-301212[/COLOR][/B][/U]
[LIST]
[*][B]Initial Release[/B]
[/LIST]
[U][B][COLOR="DarkRed"]RC- 2-030113[/COLOR][/B][/U]
[LIST]
[*][B]Updated PowerVR GPU Drivers (Its smooth! :) )
[*]Enabled KSM
[*]Added Cleancache Driver
[*]TUN/TAP Driver built-in
[*]CIFS Support
[*]Added Optimized CRC32 Algorithm
[*]Added Optimized ARM RWSEM Algorithm
[*]More Compiler Optimizations for GCC 4.7
[*]Compiled with -O3 and -pipe
[*]Enabled SmartassV2 Governer and BFQ and VR IO Scheduler
[*]Some EXT4 Patches
[*]Some more misc selective patches
[*]Enabled ARCH POWER
[*]mm(Memory management) patches
[*]Patch for Camera Memory Leak Fix (OMAPZOOM)
[/B]
[/LIST]
[U][B][COLOR="DarkRed"]RC- 3[/COLOR][/B][/U]
[LIST]
[B]
[*] Disabled KSM (Causing LAGS)
[*] REMOVED ALL SAMSUNG CRAP DEBUG CODE
[*] Built in Optimized Battery Driver
[*] Updated Interactive Governer (++Smoothness)
[*] Added CFS Autogroup (++Multitasking)
[*] Stability Fixes.
[/B]
[/LIST]
Downloads
DOWNLOADS
DOWNLOAD SIRI KERNEL RC-3 HOTIFIX!! (FIRST FLASH RC 3!!)
DOWNLOAD SIRI KERNEL RC-3
------------ OLD DOWNLOADS ---------
Download- SIRI Kernel - RC 2-030113
Download- SIRI Kernel - RC 1-301212
-----------------------------------------------------------------------------------------------------------------------------------------------
Misc Notes
Notes-
Report bugs with logcat and dmesg. No log means it didn't happen.
Do NOT use THIRD PARTY Scripts/tweaks. If you do, I am not responsible for the **** that happens.
Follow Instructions and flash.
Any posts about Linux 3.x and its info about its progress will NOT BE ANSWERED here. (Remember, patience is a virtue ).
THIS KERNEL WILL WORK ONLY ON CYANOGENMOD 10, ALPHA 4 or any ROM based on ALPHA 4.
Enjoy!
reserve last one
MY FEELINGS FOR SAMSUNG!!
First thanks!
"...The child is grown, the dream is gone..." - Pink Floyd.
Adi_Pat said:
MY FEELINGS FOR SAMSUNG!!
Click to expand...
Click to collapse
Ah, anger, the best source of energy :laugh: thank you for this one
first of all, thanks Adi_pat for many developers for galaxy sl.. i have one question.. will it work if i use slim_bean ROM based on dhiru's alpha 4?
verbatim_pcs said:
first of all, thanks Adi_pat for many developers for galaxy sl.. i have one question.. will it work if i use slim_bean ROM based on dhiru's alpha 4?
Click to expand...
Click to collapse
Yes it will work since its based on CM10 A4 ROM.
Uploading the file.. in a few mins!
Adi_Pat said:
Yes it will work since its based on CM10 A4 ROM.
Uploading the file.. in a few mins!
Click to expand...
Click to collapse
Thanks Adi_pat!! :good:
after flashing your kernel my device is just rebooting again and again
tried to download..but failed.. google said... opps sory cannot found siri... :crying:
kindly provide me a flashable file which will fix back my rom to cm10 a4
rahul_rocks3 said:
kindly provide me a flashable file which will fix back my rom to cm10 a4
Click to expand...
Click to collapse
I also bootloop, for get back Crackerizer kernel R1
just flashed again with v2 signal fix kernel and my handset is now able to boot up normally but i guess the above provided kernel has bugs
Missing my old sl b/w nice work adi . This device is still alive because of the wotk have been done by Dhiru ,you and others
rahul_rocks3 said:
just flashed again with v2 signal fix kernel and my handset is now able to boot up normally but i guess the above provided kernel has bugs
Click to expand...
Click to collapse
Ok I re-uploaded the file. The download link was corrupted. Sorry for the inconvenience.
@krazzy We are working very hard on 3.x Kernel. Just need to fix-up all the bugs!
NEW-LINK
Grate thanks for your nice job!
And good luck in future devs
Sent from my GT-I9003
cukierkas said:
Grate thanks for your nice job!
And good luck in future devs
Sent from my GT-I9003
Click to expand...
Click to collapse
Great work Adi! This kernel is significantly faster then the stock A4 kernel without any overclock. If you added overclock to this kernel, it would be even better. Just a suggestion
@ adi
I know that coz i have seen some screens of 3.x kernel on the facebook community
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
THIS KERNEL IS ONLY FOR AOSP/CM BASED ROMS
(= NOT COMPATIBLE WITH SONY FIRMWARES)
All the kernel features are controllable through Androguide.fr's Pimp My Z1 app, (thread here).
Features
Sound Control: Faux123's GPL Sound Control 3
Color Calibration Control: LCD_KCAL interface ported to the Z1 by @DooMLoRD, gives full control over the RGB channels of the display
GPU OC: 200MHz / 320MHz / 389MHz / 487.5MHz / 533MHz / 600MHz frequency scaling steps
CPU OC: up to 2.26GHz
CPU Voltage Control: use TricksterMod for the moment
Intelliplug: Faux123's latest intelliplug hotplugging driver with eco mode (v5.0)
MPDecision: showp1984's open-source & customizable msm_mpdecision hotplugging driver
Dynamic Fsync: Faux123's Dynamic File Sync v1.5
PowerSuspend: Faux123's power_suspend driver (replacing early_suspend)
Snake Charmer: Faux123's msm_cpufreq_limit CPU frequency limiter driver
Fast Charge: Faux123's fast_charge driver, allowing to set the amperage of the charger or USB port your device is plugged-in to
CPU Boost: Faux123's CPU Input Boost module (will soon add controls for it in Pimp My Z1)
GPU Wake-on-touch: allows touch events to wake the GPU if it was previously in slumber
KSM: Kernel Same-page Merging enabled
F2FS Support: Samsung's F2FS nand-optimized file system support
exFAT Support: Samsung's open-source exFAT driver
zRam Support: support for zRam memory compression
CPUPower: Linaro's cpupower PM driver
Async Fsync: Asynchronous file sync
MSM_Sleeper: Support for setting the max CPU frequency when screen is off through sysfs
Kernel mode NEON: NEON-accelerated XOR framework & support for NEON instructions in kernel mode
Overall Stats: CPU overall stats on a per-core basis
Compression: XZ Compressed & LZ4 compression algorithm support
Sched MC: Multi-Core Power Savings support
Sched SMT: Multi-Thread Power Savings support
Arch_Power: arch-specific power sched features enabled
Workqueue: backported from kernel 3.7, allows CPU hotplug to keep idle workers (learn more)
Toolchain: Built with Linaro GCC 4.9.2 toolchain from 14.04 release
Optimizations: Built with -O2 and many optimization flags
Kexec-hardboot ?: attempted to port @Tassadar's kexec-hardboot patches from the nexus 5, needs testing and confirmation that it works
Additional Governors:
ntellidemand
Intelliactive
Pegasusq
Nightmare
Hyper
Alucard
InteractiveX2
SmartassV2
Lagfree
Wheatley
Lionheart
Badass
Additional I/O Schedulers:
SIO (SImple Ondemand)
FIOPS (Fair Input/Output Per Second)
BFQ (Budget Fair Queueing)
VR
Additional TCP Congestion Algorithms:
BIC
Westwood
HSTCP
Hybla
HTCP
Vegas
Veno
Scalable
LP
YeAH
Illinois
Click to expand...
Click to collapse
Download
Release date: 2014-10-11Full-Pimped-Kernel-2014-10-12-amami.zip - 9.9 MB
Light-Pimped-Kernel-2014-10-12-amami.zip - 9.7 MB
All builds (current/previous) can be found here: Pimped Kernel Folder
These are test builds, and always tested prior to release, please provide feedback if you flash it
Click to expand...
Click to collapse
Disclaimer
Code:
# Neither me or any contributors to this kernel can nor will be held
# responsible for any damage or any kind of problem related to its use.
# You are using this piece of software AT YOUR OWN RISK.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
Sources
The sources are obviously covered by the General Public License, and are available on Androguide.fr's github at: https://github.com/PimpedKernel/android_kernel_sony_msm8974
Also you can find my fork of the sources (Light/Full) with the modifications I made to compile it for Xperia Z1 Compact at: https://github.com/RepoB/android_kernel_sony_msm8974-pimped
Click to expand...
Click to collapse
Credits
Thanks to Androguide.fr he made the whole kernel I just compiled it for Amami
Thanks to oshmoun he helped me a lot to get this kernel to be as great as it is now
Thanks to faux123 for all his contributions to the android kernel community, many of which are implemented here
Thanks to showp1984 for his msm_mpdecision hotplug driver
Thanks to DooMLoRD for all the cherry-picked features from his DoomKernel
Thanks to krabapel2458 for the inital port from DoomKernel of features like GPU OC, some governors and more.
And of course, thanks to FreeXperia and Kali- in particular, for the device bring-up
Click to expand...
Click to collapse
XDA:DevDB Information
PimpedKernel Kitkat - Amami, Kernel for the Sony Xperia Z1 Compact
Contributors
OmarEinea, oshmoun
Source Code: https://github.com/RepoB/android_kernel_sony_msm8974-pimped
Kernel Special Features: Sound Control, GPU OC, Intelliplug, PowerSuspend, Dynamic Fsync, exFAT, F2FS, KSM, Intellidemand, Intelliactive, SmartassV2, InteractiveX2, Lionheart, Wheatley, Badass, Lagfree, BFQ, SIO, FIOPS, Westwood, Hybla, HSTCP, HTCP, Veno, Illinois, LP, BIC...
Version Information
Status: Testing
Created 2014-05-30
Last Updated 2014-11-15
Changelo & To do list & Bugs:
Bugs
Please guys, this is a test build, it was tested on Carbon ROM and Resurrection Remix ROM,
but it has some stability issues, and you might face lots of bugs and software reboots while using it.
Will try to improve it, please give a nice feedback, and I'll enlist all bugs here.
Click to expand...
Click to collapse
To do list
Add dual recovery support [No recoveries included anymore]
Fix reboot to recovery in some ROMs [Done, I think!]
Enable tap to wake feature [Impossible]
Click to expand...
Click to collapse
Changelog
2014-10-11:
Fixed wlan, it should be working now!
2014-10-11:
Updated kernel with latest changes from CM & Pimped kernel
2014-05-30:
Initial release
Click to expand...
Click to collapse
ScreenShots
First here!!!! Great to see!!!! Already trying.
GPU OC in future update ?
omegastarr said:
GPU OC in future update ?
Click to expand...
Click to collapse
Maybe if I figure out why it isn't working, I mean GPU OC code is implemented in the kernel, but it's not working for some reason,
will see what I can do.
omarainea said:
...
Click to expand...
Click to collapse
Yay! Finally! Cyanogen, here I come!
TY, mate. Was waiting for this for a loooooooong time. Good job pulling it off =)
---------- Post added at 01:03 AM ---------- Previous post was at 01:02 AM ----------
omarainea said:
Maybe if I figure out why it isn't working, I mean GPU OC code is implemented in the kernel, but it's not working for some reason,
will see what I can do.
Click to expand...
Click to collapse
I'm not even sure that GPU OC works properly on Z1...
TheQwertiest said:
I'm not even sure that GPU OC works properly on Z1...
Click to expand...
Click to collapse
I'm not sure about that ether, but the weird thing is that even though the same code (as the one used for Z1) is included here,
you can't even switch GPU to more that 450MHz, I mean the GPU script has all 487.5MHz / 533MHz / 600MHz OCs but they aren't showing up
Tried it with pimp my z1
Didn't work. Specifically it crashes when any setting is changed from stock.
I'm on slimkat.
Running it on the latest CM11 nightly (31/5) and the phone momentarily freezes very shortly after boot before rebooting. Can't say what triggers it because it happens regardless of what I do.
Great work mate. The most important for me is the support for undervolting. Is it included in the kernel?
idimitro said:
Great work mate. The most important for me is the support for undervolting. Is it included in the kernel?
Click to expand...
Click to collapse
Yes it is, but you might find it buggy (for now)
@omarainea I have tested (not so much but anyway...) with carbon and resurection roms. RR install was cleaner I hadn´t utilized kernel settings beforkrnel install. Kernel works good, no reboots have changed a lot of settings without problems, on carbon phone reboots all the time but I had changed a lot of settings before kernel install. Later I will try more clean carbon installation with pimpkernel, for now I´m going with RR rom. Great work, thanks!
funiewski said:
@omarainea I have tested (not so much but anyway...) with carbon and resurection roms. RR install was cleaner I hadn´t utilized kernel settings beforkrnel install. Kernel works good, no reboots have changed a lot of settings without problems, on carbon phone reboots all the time but I had changed a lot of settings before kernel install. Later I will try more clean carbon installation with pimpkernel, for now I´m going with RR rom. Great work, thanks!
Click to expand...
Click to collapse
Can you outline the steps you took? I can't get it to work on mine both with Carbon and Slim.
ctap001 said:
Can you outline the steps you took? I can't get it to work on mine both with Carbon and Slim.
Click to expand...
Click to collapse
just did a clean Carbon or RR install, then boot to system, then reboot to recovery and flash the kernel without any wipes, reboot.
omarainea said:
just did a clean Carbon or RR install, then boot to system, then reboot to recovery and flash the kernel without any wipes, reboot.
Click to expand...
Click to collapse
By clean you mean doing a factory reset prior?
And would it matter if I wipe partition and dalvik after flashing the kernel?
Also have you tried it with ART? My crashes only happen when I was on Dalvik
ctap001 said:
By clean you mean doing a factory reset prior?
And would it matter if I wipe partition and dalvik after flashing the kernel?
Also have you tried it with ART? My crashes only happen when I was on Dalvik
Click to expand...
Click to collapse
By clean install I mean factory reset and format /system prior, and it didn't matter to me whether I wipe dalvik after flashing the kernel or not.
also, now that you're mentioning it, I haven't tried ART on Pimped kernel yet (just Dalvik).
omarainea said:
By clean install I mean factory reset and format /system prior, and it didn't matter to me whether I wipe dalvik after flashing the kernel or not.
also, now that you're mentioning it, I haven't tried ART on Pimped kernel yet (just Dalvik).
Click to expand...
Click to collapse
That step is always included in ROM instructions so I'm quite sure I did that. At first I thought the reboots were being caused by undervolting but even when I just changed the read-ahead in I/o settings I still get random crashes.
Hello!
Does the work kernel in the kit SlimRom? If so. I would like to test it!
thx
Sent from my D5503 using XDA Premium 4 mobile app
diabolica said:
Hello!
Does the work kernel in the kit SlimRom? If so. I would like to test it!
thx
Sent from my D5503 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Nope kit SlimRom is Sony based not cm-based ROM, this kernel is for cm-based ROMs.
if you're looking for a custom kernel for kit SlimRom you can try DooMKernel, I'll release v19 soon, so wait for it and try it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FOR DEVS AND USERS BEFORE FIGHT ME CLICK HERE!: https://forum.xda-developers.com/showpost.php?p=70362424&postcount=3
Code:
DISCLAIMER!!
I am not responsible in any way for anything that can be happen to your device when you flashing my kernels.You do so at your own risk!
Features
Anykernel:
- Anykernel2 zip for maximum compatibility with all ROMs, CrazySuperKernel uses your existing ramdisk (Do NOT flash this over other custom kernels!You should only flash CrazySuperKernel over the kernel that came with your ROM!!)
Kernel tweaker app:
- CrazySuperKernel Adiutor (need download it from downloads)
Toolchain:
UBERTC 6.0 Toolchain [latest update]
CPU:
- governors:
elementalx
interactive
ondemand
zzmoove
ondemandplus
conservative
powersave
userspace
- input boost
IO schedulers:
bfq
tripndroid
cfq
noop
deadline
fiops
row
sio
siopilus
zen
vr
fifo
Thermal:
- msm thermal
Sound:
- Sound control
GPU:
- Adrenoboost
More:
- init.d support
- insecure kernel (adb has root privileges)
- PVS level info
- frandom
- notification led control
- kcal v2
- CRC Check Disabled
- Dynamic filesystem read-ahead
- A lot improvments
- A lot fixes
Supported Variants:
H830
H850
Download Link CrazySuperKernel [H830] [AnyKernel]:https://www.androidfilehost.com/?w=files&flid=141303
Download Link CrazySuperKernel [H850] [AnyKernel]:https://www.androidfilehost.com/?w=files&flid=141296
Download Link CrazySuperKernelAdiutor[Updated]:https://www.androidfilehost.com/?w=files&flid=139961
Installation guide
Do NOT flash this over other custom kernels!
You should only flash CrazySuperKernel over the kernel that came with your ROM!!
- Download Kernel from this thread
- Flash it with Recovery
[Wipe cache and Dalvik cache recommended]
- Then Reboot
Enjoy the CrazySuperKernel !!!!
Credits
thx Faux123
thx Savoca
thx RenderBroken
thx flar2
thx osm0sis
thx ShinyShide
thx bhb27
thx Lord Boeffla
thx the devs where made the cm14 bootable and working
thx CrazyGamerGR yeh me
XDA:DevDB Information
CrazySuperKernel, Kernel for the LG G5
Contributors
CrazyGamerGR
Source Code: https://github.com/CrazyGamerGR/CrazySuperKernel-CM14.1-G5
Kernel Special Features: check the feature list
Version Information
Status: Testing
Created 2017-01-02
Last Updated 2017-01-04
FAQ
Recommended app : CrazySuperKernel Adiutor
changelogs
v1.0/02-01-17
- initial release
v2.0/04-01-17
- update toolchain to UBERTC 6.0
- sound control
- input boost
- frandom
- msm thermal
- many improvments under the hood
v3.0/04-01-17
- many improvments under the hood
- some fixes
For users and devs!!
All my kernels are based on cyanogenmod/lineageos source ,if someone who believes" i stoled their source" i have video captures and anyone who believes something just report me and i will have the last laugh .every tweak/mod/feature i used i edited/tweaked on my own and anyone with problem just stay away. My sources are free for anyone and can be used(i saw some ppl use them already)i don't care like other devs and i am happy and proud if someone use my work(the words" i work many hours on that project" the best repeatable words(many devs without the recognized tag and not with many thanks,they have worked for many hours/days/months and they don't cry and fight other devs )if for some devs their source are so much rare and hardworked just keep them privet(their work include their name so no problem ...we are not here for the fame ...we just want to improve the devices to make them better and not to fight with each other...
Why i am telling you all these?!
I have had many kernels unreleased from fights...i will continue to new clean projects based on lineageos and i will not care much with my source to wait many days to upload them with all the history of them because 2-3 "devs" they believe i used or edited their source...i am not a popular dev but you can't believe and no one knows how many days without sleep and hours of hardwork i have done, to do all this(and many not release source/work, much more than other devs...
reserve1
reserve2
This kernel is for cm14.1 and roms based on cm. So I guess rebased LineAge OS is also supported?!? OC and UV works without loosing stability?
Does this work for Fulmics ROM(based on v20a H850)?
666misanthrop666 said:
This kernel is for cm14.1 and roms based on cm. So I guess rebased LineAge OS is also supported?!? OC and UV works without loosing stability?
Click to expand...
Click to collapse
It is for LOS yeh,i ll add more features soon,i added just the most important and stable features.
obol2 said:
Does this work for Fulmics ROM(based on v20a H850)?
Click to expand...
Click to collapse
Only for cm/los based roms m8
Any feedback how it work the first build?
First build working amazing I. H830 latest cm build thank you
Couple questions do we gotta use the included BusyBox as I prefer stericsons
And does this support drive droid ?
Dreamlogix said:
First build working amazing I. H830 latest cm build thank you
Couple questions do we gotta use the included BusyBox as I prefer stericsons
And does this support drive droid ?
Click to expand...
Click to collapse
Thx for feedback m8,you can use every busybox you want and i never used drive droid to test it.I ll add more features maybe tonight.
CrazyGamerGR said:
Thx for feedback m8,you can use every busybox you want and i never used drive droid to test it.I ll add more features maybe tonight.
Click to expand...
Click to collapse
I'll send the info here when I get home
Edit here it is
https://forum.xda-developers.com/showthread.php?t=2196707
Dreamlogix said:
I'll send the info here when I get home
Edit here it is
https://forum.xda-developers.com/showthread.php?t=2196707
Click to expand...
Click to collapse
Maybe it is included,you tried it if it work? I ll check it again in a few minutes.
It works very well. There are a couple things I've noticed though. Using the hotplug control, setting the number of cores does not stick. Also on CPU frequency maximum if you try to change core 2 or 3 the max shows 1593 MHz instead of the higher values of these cores. Also there is no GPU control. But overall it is very stable and have been using it since you released it. Looking forward to more features and thanks for your development.
T mobile h830.
jeffsga88 said:
It works very well. There are a couple things I've noticed though. Using the hotplug control, setting the number of cores does not stick. Also on CPU frequency maximum if you try to change core 2 or 3 the max shows 1593 MHz instead of the higher values of these cores. Also there is no GPU control. But overall it is very stable and have been using it since you released it. Looking forward to more features and thanks for your development.
T mobile h830.
Click to expand...
Click to collapse
Thx for feedback m8
@jeffsga88 You tried KernelAdiutor or just CSKAdiutor?
CrazyGamerGR said:
@jeffsga88 You tried KernelAdiutor or just CSKAdiutor?
Click to expand...
Click to collapse
CSKAuditir that's included in OP.
jeffsga88 said:
CSKAuditir that's included in OP.
Click to expand...
Click to collapse
Can you try plz if KA work better?
CrazyGamerGR said:
Can you try plz if KA work better?
Click to expand...
Click to collapse
Okay so using the regular kernel auditor setting CPU max for both the little and big core configuration works correctly (able to properly set max CPU speed). Also able to change GPU speed settings. But hotplugging option to change max cores not available in kernel auditor, so not sure that's fully implemented in your kernel yet? Also like your version of kernel auditor for screen settings where you can choose preset profiles. But overall the regular kernel auditor does seem to work better.