I was getting bored. And thought of playing around with the old 2.6.35 Source.
Have been using this Kernel for a week now, for personal use mainly. Thought of releasing it so that you guys can use it till our Linux 3.x Project is complete.
I thought of giving you guys some contributions from my side, and keep developments active while I work on Linux 3.0 with dhiru..
Presenting, my new Kernel, based on 2.6.35 source by samsung , which was modified by dhiru1602 for functionality on CM10.
Experience increased Smoothness on your i9003 !!
Will work only on CM10 Alpha 4 and all CM10 Alpha 4 based ROMS.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FEATURES
Updated GPU Drivers! (Smoothness+++)
Compiled with Linaro Toolchain GCC 4.7.
Updated Interactive Governer from Linux 3.x
Optimized Battery Driver (Built in) - IoSconiscuito
Disabled Debugging stuff for a faster Kernel.
Stock Frequencies Undervolted for Better Battery.
Optimized CRC32 Algorithms.
Cleancache.
Compiler Optimizations.
Tuned up VM Ratios.
Fixed loads of Samsung Derps and Section Mismatches.
Network Fix.
Removed all CRAP SAMSUNG DEBUG!
Added CFS Autogroup (++Multitasking)
Backported DSSCOMP.
Reduced LOG size.
ARM: Add optimised swahb32() byteswap helper for v6 and above
Fixed gpt12_fck clockdomain warning.
XZ Compressed Kernels.
SLUB Memory Allocator (Better than the SLUB -> Default)
Governers: Interactive,Conservative,Performance,Ondemand,SmartassV2
IO SCHEDULERS: SIO,VR,BFQ,CFQ.
Cleancache, KSM Enabled.
TUN/TAP and CIFS Built-in
Lots more! Flash and see for yourself!!
Some more selective patches from upstream and other repos.
INSTRUCTIONS TO FLASH-
Flash CM10 Alpha 4.
Download the Zip file from the link in the Downloads Section.
Reboot into Recovery Mode.
Select Zip, install. (**** you samsung )
Wipe Cache,Dalvik Cache and Battery Stats.
Enjoy.
Credits-
dhiru1602 (For all the advice,guidance and support!)
HetalK (For all the motivation,support and UART!)
Sakindia123 (For encouraging me to build my first Kernel)
bangalorerohan
gokhanmoral
simone201
Changelogs
CHANGELOGS
Code:
[B][COLOR="Red"]SIRI KERNEL-[/COLOR][/B]
[U][B][COLOR="DarkRed"]RC- 1-301212[/COLOR][/B][/U]
[LIST]
[*][B]Initial Release[/B]
[/LIST]
[U][B][COLOR="DarkRed"]RC- 2-030113[/COLOR][/B][/U]
[LIST]
[*][B]Updated PowerVR GPU Drivers (Its smooth! :) )
[*]Enabled KSM
[*]Added Cleancache Driver
[*]TUN/TAP Driver built-in
[*]CIFS Support
[*]Added Optimized CRC32 Algorithm
[*]Added Optimized ARM RWSEM Algorithm
[*]More Compiler Optimizations for GCC 4.7
[*]Compiled with -O3 and -pipe
[*]Enabled SmartassV2 Governer and BFQ and VR IO Scheduler
[*]Some EXT4 Patches
[*]Some more misc selective patches
[*]Enabled ARCH POWER
[*]mm(Memory management) patches
[*]Patch for Camera Memory Leak Fix (OMAPZOOM)
[/B]
[/LIST]
[U][B][COLOR="DarkRed"]RC- 3[/COLOR][/B][/U]
[LIST]
[B]
[*] Disabled KSM (Causing LAGS)
[*] REMOVED ALL SAMSUNG CRAP DEBUG CODE
[*] Built in Optimized Battery Driver
[*] Updated Interactive Governer (++Smoothness)
[*] Added CFS Autogroup (++Multitasking)
[*] Stability Fixes.
[/B]
[/LIST]
Downloads
DOWNLOADS
DOWNLOAD SIRI KERNEL RC-3 HOTIFIX!! (FIRST FLASH RC 3!!)
DOWNLOAD SIRI KERNEL RC-3
------------ OLD DOWNLOADS ---------
Download- SIRI Kernel - RC 2-030113
Download- SIRI Kernel - RC 1-301212
-----------------------------------------------------------------------------------------------------------------------------------------------
Misc Notes
Notes-
Report bugs with logcat and dmesg. No log means it didn't happen.
Do NOT use THIRD PARTY Scripts/tweaks. If you do, I am not responsible for the **** that happens.
Follow Instructions and flash.
Any posts about Linux 3.x and its info about its progress will NOT BE ANSWERED here. (Remember, patience is a virtue ).
THIS KERNEL WILL WORK ONLY ON CYANOGENMOD 10, ALPHA 4 or any ROM based on ALPHA 4.
Enjoy!
reserve last one
MY FEELINGS FOR SAMSUNG!!
First thanks!
"...The child is grown, the dream is gone..." - Pink Floyd.
Adi_Pat said:
MY FEELINGS FOR SAMSUNG!!
Click to expand...
Click to collapse
Ah, anger, the best source of energy :laugh: thank you for this one
first of all, thanks Adi_pat for many developers for galaxy sl.. i have one question.. will it work if i use slim_bean ROM based on dhiru's alpha 4?
verbatim_pcs said:
first of all, thanks Adi_pat for many developers for galaxy sl.. i have one question.. will it work if i use slim_bean ROM based on dhiru's alpha 4?
Click to expand...
Click to collapse
Yes it will work since its based on CM10 A4 ROM.
Uploading the file.. in a few mins!
Adi_Pat said:
Yes it will work since its based on CM10 A4 ROM.
Uploading the file.. in a few mins!
Click to expand...
Click to collapse
Thanks Adi_pat!! :good:
after flashing your kernel my device is just rebooting again and again
tried to download..but failed.. google said... opps sory cannot found siri... :crying:
kindly provide me a flashable file which will fix back my rom to cm10 a4
rahul_rocks3 said:
kindly provide me a flashable file which will fix back my rom to cm10 a4
Click to expand...
Click to collapse
I also bootloop, for get back Crackerizer kernel R1
just flashed again with v2 signal fix kernel and my handset is now able to boot up normally but i guess the above provided kernel has bugs
Missing my old sl b/w nice work adi . This device is still alive because of the wotk have been done by Dhiru ,you and others
rahul_rocks3 said:
just flashed again with v2 signal fix kernel and my handset is now able to boot up normally but i guess the above provided kernel has bugs
Click to expand...
Click to collapse
Ok I re-uploaded the file. The download link was corrupted. Sorry for the inconvenience.
@krazzy We are working very hard on 3.x Kernel. Just need to fix-up all the bugs!
NEW-LINK
Grate thanks for your nice job!
And good luck in future devs
Sent from my GT-I9003
cukierkas said:
Grate thanks for your nice job!
And good luck in future devs
Sent from my GT-I9003
Click to expand...
Click to collapse
Great work Adi! This kernel is significantly faster then the stock A4 kernel without any overclock. If you added overclock to this kernel, it would be even better. Just a suggestion
@ adi
I know that coz i have seen some screens of 3.x kernel on the facebook community
Related
[CM10/ICS/MIUI][KERNEL][GPL][rc-3] ♫♫ Titanium.Kernel ♫♫ An All in one Kernel! ♫
Whats up guys!
So.. you'll already know me
SO no Introductions.
For those who don't know me, I am a Kernel Developer, Check the links in my signature to see my work
Now.. Getting back to topic!
Presenting.........
★★★ Titanium Kernel for Galaxy R - GT-I9103 ★★★
Remember,
Code:
[B]/* DISCLAIMER */ [/B]
[SIZE="5"][FONT="Arial Black"][COLOR="Red"][U]I do not own the device![/U][/COLOR][/FONT][/SIZE]
[COLOR="Red"][B][FONT="Arial Black"]You are choosing to make the modifications at your own risk.[/FONT][/B][/COLOR]
This Kernel is for Samsung ICS ROMs or any ROM based on Samsungs stock ROMs.
★ What my Kernel is made up of ★
★ This Kernel will work on every ROM, look into Downloads section and select your Kernel. ICS Kernel will work on Angeeks ROM
eMMC Brick bug cleaned up.
Based on Samsung ICS Update 2 Sources
Compiled with Linaro 4.6.2 toolchain
Overclock upto 1.2 Ghz
GPU Overclock upto 410 Mhz
All Linux memory Management Parameters tuned up for best performance.
Optimized ARM RWSEM Algorithms.
ARCH Power Enabled
JRCU (Joe's RCU, best suited for small SMP Systems!)
Proportional Rate Reduction for TCP by Google.
RAM Console Debugging Removed (More RAM)
Reclaimed RAM from Android Logger(logcat) (More RAM)
RAM Hack based on my old GB Kernel patch(+56 MB)
Voodoo Sound
Enabled NTFS Filesystem
Auto Brightness Fixes (ardatdat)
TCP/IP Tweaks
XZ Compression for Kernel (++speed,--size)
Using SLUB Memory Allocator (I always prefer this!)
Unneeded Stuff cleaned up in defconfig
EXT4 is default, EXT4 is used for mounting EXT2 and EXT3 (Faster)
NOATIME NODIRATIME Mounts set as default
Governers: Hotplug, Smartass2, Performance, Ondemand, Conservative.
IO Schedulers: Noop and CFQ (Default)
..
ROW IO Scheduler
BLN Support w/ liblights loaded from ramdisk
WIFI MAC Address Changing support
Lots of Makefile Optimizations + GCC 4.6 Optimizations
Dynamic FSYNC Control (faux123)
Stochastic Fair Blue Net Scheduler
Optimised swahb32() byteswap helper
Code cleanups done where necessary
IO Patches
TUN/TAP Driver built in
--
Cleancache Support
KSM Enabled
Disabled unnecessary drivers
LZMA Compressed Ramdisk (--size)
N1 Board and Touchscreen driver fully cleaned up of all Samsung **** ups and warnings!
Lots more stuff! Flash and see for yourself.
Ramdisk Mods:
Auto-root (SuperSU)
BLN Liblights loaded from ramdisk itself
Auto-EFS Backup
init.d scripts run on boot
Custom Bootanimation support (ICS ROM)
Other misc stuff.
TODO:
[*]Fix all Kernel warnings and crap samsung code.
[*]Get rid of TEGRA CPU LOCK.
[*]Set up Custom Voltage sysfs.
[*]Fix all game lags.(Which is present on stock Samsung sources and ROMS)
[*]Port some more Tegra specific mods from other Tegra devices.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
★ I plan to contribute a lot to this Kernel in the near future! Test it and let me know. ★
★ Also, I plan to clean up lots of Samsung **** code and **** ups in the source ★
★ Remember, I do not have the device so it will take me time to fix up bugs (If there are any) ★
Credits ,
☑ Many of the patches on my source which I have incorporated may not be programmed by me, I have credited them on my github.
☑ Adam77Root, ardatdat (Kernel patches, credited on my github)
☑ faux123
☑ parmarket,shaheen(For testing this first on their phone)
☑ and MEEEeeee .. of course!
Changelogs
Code:
[B]Kernel rc-1[/B]
Initial Release
[B]Kernel rc-2[/B]
CM10 Support
AOSP Vibrator fix
KXTF9 Sensor driver for CM10
BLN Support w/ liblights which will be loaded by ramdisk
Enabled Wifi MAC Address Changing ability
Makefile Optimizations
SYNC Frameworks and SW Sync
XZ Compression for Kernel
ARM CPU Topology
Dynamic FSYNC Control (faux123)
ROW IO Scheduler ~Enabled by default (Meant for mobile devices)
Added ARM NET JIT Compiler
Add optimised swahb32() byteswap helper
Lots more stuff, too technical to explain, check my github.
[B]Kernel rc-3[/B]
---COMING UP-----
Stability fixes, fixed hangs,lags from rc-2.
Lots of Code Cleanups for better optimized code!
Board-n1 cleaned up of all warnings
Atmel MXT-224E driver cleaned up of all warnings.
GCC 4.6 (Linaro) Optimizations
MIUI Support
Reverted SYNC,SW_SYNC,ARM NET JIT Compiler (Will have to do testing!)
Enabled KSM
Enabled CLEANCACHE
Disabled a lot of unnecessary drivers to reduce memory footprint in Kernel.
LZMA Compressed Ramdisk (--size)
Bumped reserved memory to 200MB
Asynchronous I/O latency to a solid-state disk greatly increased (cherry-picked)
Downloads
Download: Titanium Kernel rc-3 - ICS
Download: Titanium Kernel rc-3 - CM10
Download: Titanium Kernel rc-3 - MIUI
-------- OLD VERSIONS NOT RECOMMENDED! -------------
Download: Titanium Kernel rc-2 - ICS
Download: Titanium Kernel rc-2 - CM10
Download: Titanium Kernel rc-1
FAQ's
FAQ:
1) Do not use 3rd party init.d scripts! If you wish to use any ask in the thread. I will tell you if you can.
2) How to flash the Kernel?
A: Flash the zip via CWM ... duhhh! :victory:
3) Why only 4 governers ?
A: Too many Governers bloat the Kernel, many are quite similar.
Best Governer for Battery: Conservative
Best Governer for Performance: Smartass2 or Performance
4) Can you add support to turn off one cpu core?
A: You don't need to do it manually, Hotplug governer knows when to turn off one core.
5) Will you overclock more?
A: No, 1.2 Ghz is enough. We wan't stability and not problems.
6) I got X bug, I got Y bug.
A: I will fix it, recreate the problem and give me a logcat. Remember, it may take time and testing to fix a bug since I do not have the device.
7) Will this support CM in future?
A: Ofcourse! I will also be helping in CM development soon.
8) My phone does not enter deep sleep.
A: Some app is constantly waking up your phone.
9) DO NOT USE ANY SET CPU PROFILES! .
A note on How-to report bugs.
Great one buddy. Unfortunately over CM10. will b waiting for CM10 kernel. thanks again.:fingers-crossed:
Great work Buddy :good:. Cud u add the stopbootanimation service at end of script in init.rc so that v can use this kernel for custom bootanimation.:highfive:
thanks
thanks buddy, nice work, all feature sounds great :good:
I particularly like of have only 4 governers which is simple and useful , too much confuse most of the time. :laugh:
thanks again and keep it up :good:
I wish u had kept interactive governer. Anyways, will try this after college.
Sent from my GT-I9103 using xda app-developers app
kataria.vikesh said:
Great one buddy. Unfortunately over CM10. will b waiting for CM10 kernel. thanks again.:fingers-crossed:
Click to expand...
Click to collapse
Will add CM support post the CM10 boot.img here.
selva.simple said:
Great work Buddy :good:. Cud u add the stopbootanimation service at end of script in init.rc so that v can use this kernel for custom bootanimation.:highfive:
Click to expand...
Click to collapse
Yeah, can do it. Will build my own ramdisk in the next release.
gitanshu said:
I wish u had kept interactive governer. Anyways, will try this after college.
Sent from my GT-I9103 using xda app-developers app
Click to expand...
Click to collapse
I will drop ondemand and add interactive, Interactive governer is an improved version of ondemand.. anyways.. this is first release ... lots to come still!
will it work on angeeks rom??
kunaal2580 said:
will it work on angeeks rom??
Click to expand...
Click to collapse
No. Currently this does not support custom boot animation which if u flashed on angeek's rom will result in bootanimation loop.
Adi_Pat said:
Will add CM support post the CM10 boot.img here.
Click to expand...
Click to collapse
Edit: here is the link of cm10 kernel
http://db.tt/lrOpqrxL :victory:
kataria.vikesh said:
Edit: here is the link of cm10 kernel
http://db.tt/lrOpqrxL :victory:
Click to expand...
Click to collapse
Gimme a few mins, making it CM Compatible , just need to pack teh ramdisk with my Kernel .. (Hopefully nothing more, someone will have to test it)
kataria.vikesh said:
Edit: here is the link of cm10 kernel
http://db.tt/lrOpqrxL :victory:
Click to expand...
Click to collapse
Does it have bln mod?
Sent from my GT-I9103 using Tapatalk 2
Benchmarks
these are some benchmarks of this Kernel (With Geeky Engine)
CPU speed 1Ghz
Governer: smartass2
CPU speed 1.2Ghz
Governer: smartass2
Good work! Waiting for the anti boot loop kernel support for the angeeks ROM.
Enviado desde mi GT-I9103 usando Tapatalk 2
@Adi_Pat: To make the kernel compatible with CM10, do the followings:
1. Implement vibrator fix. (https://github.com/epsylon3/android...mmit/720914d5009039d3ba9898361eea1ad8ab09d326)
2. Add raw KXTF9 accelerometer sensor. (https://raw.github.com/epsylon3/android_kernel_samsung_i9103/gingerbread/drivers/input/misc/kxtf9.c Put it into drivers/sensors, modify Makefile and KConfig accordingly and enable it in defconfig.)
3. Take the ramdisk.
You don't have to compile two different kernels for the two roms, only change the ramdisk. The kernel works quite well in hybrid mode with the modifications included.
Also, if you have time please include these patches into your kernel. I'd really appreciate them. Thanks!
Adam77Root said:
@Adi_Pat: To make the kernel compatible with CM10, do the followings:
1. Implement vibrator fix. (https://github.com/epsylon3/android...mmit/720914d5009039d3ba9898361eea1ad8ab09d326)
2. Add raw KXTF9 accelerometer sensor. (https://raw.github.com/epsylon3/android_kernel_samsung_i9103/gingerbread/drivers/input/misc/kxtf9.c Put it into drivers/sensors, modify Makefile and KConfig accordingly and enable it in defconfig.)
3. Take the ramdisk.
You don't have to compile two different kernels for the two roms, only change the ramdisk. The kernel works quite well in hybrid mode with the modifications included.
Also, if you have time please include these patches into your kernel. I'd really appreciate them. Thanks!
Click to expand...
Click to collapse
Thanks! Sure I will. Will merge your patches soon.
Still studying the source.. looks like lots can be improved!
Super cool.. awesome kernel..
Working great.. thanks
Sent from my GT-I9103 using xda premium
parmarket said:
these are some benchmarks of this Kernel (With Geeky Engine)
CPU speed 1Ghz
Governer: smartass2
CPU speed 1.2Ghz
Governer: smartass2
Click to expand...
Click to collapse
Hi Ketan, Are you using Adi's kernel on miui rom? or CM10? was curious if it works fine on Paraj's miui rom.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Stable Release
Based on CyanogenMod source (www.github.com/CyanogenMod/android_kernel_samsung_n1)
Built with Linaro Toolchain 4.7.3
Governor (Powersave, Interactive, Performance, SmartAss2)
I/O - Scheduler (noop, deadline, row, sio)
GPU OC to 410 MHz
Backlight Notification (BLN) support (Thanks Adam!)
Ram Hack
Init.d scripts
Performace Tweaks
Great Battery Life
Weekly Release
Based on CyanogenMod source (www.github.com/CyanogenMod/android_kernel_samsung_n1)
Built with Linaro Toolchain 4.8.1
Governor (smartassV2, ondemand, powersave, interactive, performance)
I/O - Scheduler (noop, deadline, cfq, sio)
GPU OC to 410 MHz
ACPI from Linux Kernel 3.2
Lowmemorykiller from Linux Kernel 3.10rc-5
Zram from Linux Kernel 3.4
Backlight Notification (BLN) support (Thanks Adam!)
Fsync Control (Thanks Ezekeel!)
Battery Life Extender (BLX) support (Thanks Ezekeel!)
Ram Hack
Init.d scripts
Performace Tweaks
Great Battery Life
Weekly Release
Download v2.2.2
Stable Release
Download v1.3.2
Butter Updater
Download 0.9.8 beta
Can I try your Experimental Kernel?
Send me a PM.
Deep Sleep is not working! Help!
Wipe Cache + Dalvik.
Can it be used on pac man rom 20.0 Or 4.2.2?????
Yes, you can.
How do I return to the default 4.2.2 kernel?
Flash a AOSP Based Rom. for example CM 10.1
Grarak, can you add X or Y?
Just PM me for requests
My device rebooted or crashed, how can I help?
Give me /proc/last_kmsg or logcat.
Battery is bad! Help me!
Fix it yourself, it's an app waking your device up.
Signal is dropping since I flashed the kernel
Kernel has nothing to do with the the signal.
Does this kernel has X or Y mod?
Everything you need to know is in the features list, changelog or public repo.
Hi i have 4.0.4. Can i flash this safe?
No, read the title of the thread!
How can I build your Kernel from source?
Just download my source on Github and run "buildbutter.sh"
Adam77Root
karthik050782
Epsylon3
franciscofranco
r_data
dorimanx
Adi_Pat
pengus77
Ezekeel
halaszk
Stable Release
v1.3.2
support custom vibration intensity
v1.3.1
Full rebase (Adam77Root)
remove duplicated CONFIG_FSA9480 (Epsylon3)
Cleanup BT LPM, FM code cleanup (Adam77Root)
new build script
new butter logo in updater-script
ramdisk up to date
governors: add smartass2
removed a lot of governors and I /O schedulers
governor: interactive from butter weekly
v1.3
Fix restore mDNIe mode after screen unlock, removed hardcode for Dynamic mode (nRoof)
Enable Ad-Hoc (IBSS) mode for bcmdhd (Adam77Root)
ums: allow multiple lun files for n1 and bose (Epsylon3)
ADB fix
v1.0
Initial Release
Weekly Release
v2.2.2
Disable metal suppression check to fix touchscreen lags after screen On
led timeout fix (Adam77Root)
ramdisk: up to date
lowmemorykiller: lmk from linux kernel 3.10.0-rc5
toolchain: update to 13.05
linaro toolchain 4.8.1
v2.2.1
support custom vibration intensity
v2.2.0
Full rebase (Adam77Root)
disabled vsyscall
v2.1.3
back to linaro toolchain 4.7.3
new build script
lowmemorykiller from linux kernel 3.9
enabled zram
v2.1.2
linaro toolchain 4.8.1
keytimeout delay 3 sec
mm/page_alloc.c: min_free_kbytes to 8192
enable vsyscall
v2.1.1
added Fsync control
added BLN control
added BLX control
GPU overclock 410 MHz
added optimized CRC32 algorithm
added SLQB memory allocator
v2.1.0
removed I /O: row
removed Governors: userspace, hotplug, conservative
ram console backport from Linux Kernel 3.4
zram backport from Linux Kernel 3.4
binder backport from Linux Kernel 3.4
removed some tweaks
added Frandom
v2.0.1
ACPI from Linux Kernel 3.2
Lowmemorykiller from Linux Kernel 3.4
Wireless drivers from Linux Kernel 3.4
Enable Ad-Hoc (IBSS) mode for bcmdhd (Adam77Root)
Add some Governors
Revert GPU Overclock to 350MHz
GPU Overclock to 380MHz
Revert Random driver
Fix slow Wifi
Fix CPU set Freq
v1.2
GPU OC to 350MHz
Governor Smartassv2
Removed Governor (Performance, Conservative)
Memory Optimization
ADB Fix
v1.1
ums: allow multiple lun files for n1 and bose (Epsylon3)
Ram Tweaks
v0.2
Removed OC
Added ROW I/O
ZRam Optimization
Update GCC Version Linaro 4.7.3
v0.1
Initial Release
www.github.com/Grarak/ButterKernel-n1
Awesome buddy. Downloading now. On Vanilla Rom. Will use for a while and revert.
pulley06 said:
Awesome buddy. Downloading now. On Vanilla Rom. Will use for a while and revert.
Click to expand...
Click to collapse
Would be cool if you give me a feedback
I'm going to sleep and I hope a mod can move it to the development section.
Re: [KERNEL][Linaro][4.2.x]Butter Kernel v0.1 [2 March]
Grarak said:
Would be cool if you give me a feedback
I'm going to sleep and I hope a mod can move it to the development section.
Click to expand...
Click to collapse
:thumbup:
Flashed it. Battery a little low so will charge it for a while and revert.
Nokia 2110-->Sony Ericsson k750i -->Nokia 5233 --> Samsung Galaxy R
Re: [KERNEL][Linaro][4.2.x]Butter Kernel v0.1 [2 March]
Here is Geekbench 2 score
Sent from my GT-I9103 using xda premium
Re: [KERNEL][Linaro][4.2.x]Butter Kernel v0.1 [2 March]
Okay so used it for a while. Buttery smooth! Only one thing I found was that I set the maximum frequency to 1000 and still it's going to 1320.
Nokia 2110-->Sony Ericsson k750i -->Nokia 5233 --> Samsung Galaxy R
Re: [KERNEL][Linaro][4.2.x]Butter Kernel v0.1 [2 March]
Can it be used on pac man rom 20.0
Or 4.2.2?????
HIt tHnX iF i hElP u
Sent from my GALAXY RoYaL
Re: [KERNEL][Linaro][4.2.x]Butter Kernel v0.1 [2 March]
Yes, you can.
Sent from my GT-I9103 using xda premium
amar1548 said:
Can it be used on pac man rom 20.0
Or 4.2.2?????
HIt tHnX iF i hElP u
Sent from my GALAXY RoYaL
Click to expand...
Click to collapse
Yes. But take backup first.
This kernel is AWESOME!
Games started to run much more smoother
especially real racing 3
Thanks Grarak !
Re: [KERNEL][Linaro][4.2.x]Butter Kernel v0.1 [2 March]
One X still dominates.
Sent from my GT-I9103
Re: [KERNEL][Linaro][4.2.x]Butter Kernel v0.1 [2 March]
Yeh just flashed, works pretty good but battery life is decreased drastically and when the screen is on the cpu keeps running at 1ghz
HIt tHnX iF i hElP u
Sent from my GALAXY RoYaL
amar1548 said:
Yeh just flashed, works pretty good but battery life is decreased drastically and when the screen is on the cpu keeps running at 1ghz
HIt tHnX iF i hElP u
Sent from my GALAXY RoYaL
Click to expand...
Click to collapse
wiping cache & dalvik cache would help you. Also, take the battery out for 5-10 min then reinsert it. Revert then.:good:
v0.2 is up
I removed OC.
It's too unstable now. Some users always running 1.32 GHz although they set Max Freq to 1 GHz.
Re: [KERNEL][Linaro][4.2.x]Butter Kernel v0.1 [3 March]
How do I return to the default 4.2.2 kernel?
GeorgePB said:
How do I return to the default 4.2.2 kernel?
Click to expand...
Click to collapse
I was on vanilla rom when I flashed the kernel. When I wanted to go back I flashed the rom again. This worked for me.
Even though you removed ocing, freezing and stuttering is still there. This is caused by the cpu scaling mostly (only) between min and max. For example, Hill Climb Racing freezes a lot with default settings (interactive) but is just fine with performance. If you can, please have a look at the governors' parameters.
Re: [KERNEL][Linaro][4.2.x]Butter Kernel v0.2 [3 March]
I flashed the v0.2
My phone doesn't turn the screen on if I keep its screen off even for a couple of minutes.
Sent from my GT-I9103 using xda app-developers app
touch is better in first version
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WARNING :
This KERNEL is only for Galaxy S5 Plus LTE-A (SM-G901F/kccat6) version !
You will void your warranty after flashing this ROM (knox @ 0x1)
I'am not responsible of any damage caused to your device after flashing this KERNEL
Some reading..
First of all, I would like to thanks a lot my friend @xdamc2010 for his hard investment about making a kernel finally bootable and stable kernel for our G901F and tells me his solution to finally make this kernel living. Huge kudos to him, and also to @JDizzle80 to find the solution at the same time.
SimpleGX is only looking for simplicity and stability, trying to aim for best battery life, smoothness and performance experience, than a pure stock kernel.
I still don’t qualify myself as of a real developer, but just a basic person with some android/linux knowledge already.
As always, I’m enjoying sharing my contribution here on XDA for free, which taking me a lot of time to release, so if you can offer me a little beer, I will really appreciate that.
This kernel must be only flashed over an official Samsung ROM and not AOSP/AOKP !
Feel free to include my kernel to your ROMs / Threads but please don't forget to inform/ask first via PM and credit me in your original thread.
★ WHAT TO EXPECT ★ :
(over a pure stock kernel) :
Best battery life experience.
Much better overall performance.
Efficient (only proven to be good ones and not affecting battery life) tweaks.
Stay as close as possible from stock source.
★ FEATURES (up-to-date) ★ :
Base :
Directly based on "SM-G901F_KK_Opensource.zip" (XXU1ANH5) KitKat Android 4.4.4 source from Samsung (for clean work and stability)
Compiled with Linaro Cross Compiler (4.9.4 / 2015.06) toolchain (optimized for Cortex-A15) with optimization flags.
Ramdisk from XXU1ANK5
Main :
ZZMoove (v1.0 beta8) governor added
ZRAM enabled with LZ4 compression and set as default
TCP congestion control modules activated: Westwood (currently as default), reno, bic, cubic and htcp
SElinux set to "Permissive"
init.d support
DriveDroid support
Various tweaks :
Android logger disabled
Kernel logger disabled
CRC disabled
Doubled min-max ReadAhead
random: increase entropy levels (both read and write)
slub.c: little tweak for performance improvements
Set initial TCP window size to 64K
Removes the red message "KERNEL IS NOT SEANDROID ENFORCING" during boot stage
Samsung Root restriction disabled
Features that will NEVER be included in this kernel :
auto-root.
LED control.
Charge control.
Master sequence (screen calibrated).
ABB (Adaptive Body Bias).
Any upgrade of Linux kernel 3.1x
Dual-Boot Sammy/AOSP.
CyanogenMod compatibility.
MIUI compatibility.
etc.
★ PREREQUISITE ★ :
Your device must be on KitKat Samsung firmware.
A custom recovery (CWM recommanded) to flash the kernel.
★ SOURCE (up-to-date) ★ :
Github >> SimpleGX.
★ INSTALLATION PROCEDURES ★ :
- You freshly bought your new Galaxy S5 Plus device and want to install this kernel ? follow this :
At this point, be sure to already be in XXU1ANK5 firmware (otherwise, you will face bootloop due to unmatched ramdisk),
Backup everything you need (internal & external),
Reboot in Download mode,
Flash Chenglu's unofficial custom CWM based recovery via Odin (load as AP),
Reboot to your new CWM recovery,
Flash the KERNEL,
Reboot and enjoy !
- You already is on SimpleGX ROM ? follow this :
Reboot to your CWM recovery,
Flash the KERNEL,
Reboot and enjoy !
- If you want to update your current SimpleGX KERNEL :
Backup everything you need (internal & external).
Reboot to your CWM recovery,
Flash the KERNEL,
Reboot and enjoy !
- Want to switch back to stock KERNEL ? :
Grab your matched firmware HERE,
Reboot to your CWM recovery,
Flash the KERNEL,
Reboot and enjoy !
★ DOWNLOADS LINK ★
/!\ ALWAYS CHECK MD5 BEFORE FLASHING /!\
Need supports ? all kind of questions must be posted on this thread directly. Be sure to read at least completely this first post before asking any question.
If you enjoy this kernel, don't forget to rate this thread
stars, and clicking the 'thanks' button (right below) is always appreciated to keep this thread maintained
LIKE MY WORK ?
OFFER ME A
!
Changelog
★ CHANGELOG ★ :
01.09.2015 : v1.1.5 released.
simplegx_defconfig : Disable 'CONFIG_CC_OPTIMIZE_FOR_SIZE' so size optimization will finally get active (thx kykdev for the notification).
28.08.2015 : v1.1.4 released.
ZZMoove governor updated to v1.0 beta8 (including latest fix).
Makefile : disable inline functions and add no-pic switch.
tcp_output : set initial TCP window size to 64K (speed improvement).
23.07.2015 : v1.1.3 released.
Updated cross compiler toolchain from 4.9.3-2015.03 to 4.9.4-2015.06.
19.07.2015 : v1.1.2 released.
Add DriveDroid support (thanks to @DienoX for the git merge request).
10.06.2015 : v1.1.1 released.
simplegx_defconfig: Samsung Root restriction disabled.
05.06.2015 : v1.1.0 released.
ZZMoove governor updated to v1.0 beta7a.
Updated cross compiler toolchain from 4.7.4-2014.06 to 4.9.3-2015.03.
03.05.2015 : v1.0.3 released.
Removes the red message "KERNEL IS NOT SEANDROID ENFORCING" during boot (big thanks to @xdamc2010 for the tips).
23.03.2015 : v1.0.2 released.
Add init.d support (kernel side).
21.03.2015 : v1.0.1 released.
Now compiled with Linaro Cross Compiler (4.7.4 / 2014.06) toolchain (optimized for Cortex-A15) with optimization flags.
21.03.2015 : v1.0.0 released.
Initial release (check actual features).
Thanks & greetings
★ THANKS & GREETINGS ★ :
(by alphabetic order)
Christopher83
DienoX
Lord Boeffla
slim80
xdamc2010
ZaneZam
. . . and to all people credited in my commits
Donations
★ DONATIONS ★ :
None yet.. :[
Reserved
Reserved.
Thanks for the new kernel!! Great Job!! Is there also a kernel "management program / app" to control or adjust this kernel??
Handeman707 said:
Thanks for the new kernel!! Great Job!! Is there also a kernel "management program / app" to control or adjust this kernel??
Click to expand...
Click to collapse
TricksterMOD & SetCPU are your friend apps for that, so you can change governor, tcp congestion module, some slight values, etc, but do not expect more :good:
Will it work if I'm on FXXU1ANH6?
"Setcpu" old one... Was long time on Boeffla kernel at Samsumg S3, but enjoying the S5 Plus [G901F] v4.4.4 now, speccially with your great work here!!!
Lao Mayer said:
Will it work if I'm on FXXU1ANH6?
Click to expand...
Click to collapse
You can give and report, but normally it should not boot.
Make a stock ANH6 kernel flashable zip just in case, so you will be able to boot back if it don't work.
To make short: copy and past my flashable zip, rename it "stock_kernel.zip", open it and place it your "boot.img" from your actual firmware and place it in your sdcard just to be safe in case of problem :good:
Kernel is fast:
UPDATE
★ UPDATE ★ :
21.03.2015 : v1.0.1 released.
Now compiled with Linaro Cross Compiler (4.7.4 / 2014.06) toolchain (optimized for Cortex-A15) with optimization flags.
Enjoy :highfive:
With stock SimpleGX i get a score of 51544 anf with the first version of kernel 49968.
Now gonna try second version.
Still happy, great stuff DeV
I got 50k on 1.2.3 of the rom using interactive governor
just now tested 46k using new kernel and zzmoove governor
with new kernel and interactive governor, best score out of all 3 tests 51.4k.
I will post screenshots from phone so can see which part of tests change.
Stock kernel and interactive 1426997410034
New kernel and zzmoove 1426997459226
New kernel and interactive 1426997518625
Sent from my SM-G901F using XDA Free mobile app
For those who want to revert back to stock kernel, I added a procedure into first post :good:
Cheers'
AndroidGX said:
For those who want to revert back to stock kernel, I added a procedure into first post :good:
Cheers'
Click to expand...
Click to collapse
Thanks, but kernel v1.01 is running great!!
Unlikely I will revert but is good there is now a procedure thanks.
My initial report is the phone does feel smoother to use, and in particular the play store is way more responsive.
Also the phone probably had 6 hours or so sleep time since I turned screen off and no battery drain on battery page, is flat line, not sure if thats either excellent battery life during sleep or its not been updating.
and I am using zzmoove.
chrcol said:
Unlikely I will revert but is good there is now a procedure thanks.
My initial report is the phone does feel smoother to use, and in particular the play store is way more responsive.
Also the phone probably had 6 hours or so sleep time since I turned screen off and no battery drain on battery page, is flat line, not sure if thats either excellent battery life during sleep or its not been updating.
Click to expand...
Click to collapse
Do you mean you prefer stock kernel ?
I had some drain issues with v1.0.0 which is now solved in v1.0.1 :good:
No I prefer your kernel
no issues so far.
Hi guys, I have proposed to make a kernel for the falcon and here they have it <3
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Old builds:
http://pastebin.com/kDiQ8Hrr
Evolution Kernel -R6 build for MM Roms:
-Evolution_Kernel-R6 is unified for MM roms[/B], CM13/AOSP6/
- Linux code updated to lastest LineageOS source: 3.4.113
- Based on a new clean source for greater stability
- Compiled with LinaroTC 4.9 optimized cortex A7
- Many optimization for memory usage and reduce Lag
- Added TCP modes like westwood
- Lzma compression (very nice)
- No more useless mods
- Added SIO, VR, ZEN I/O schedulers
- Added toggles for wakelocks
- MSM Hotplug stable rules
- Powersuspend added and optimized
-Added Kcal v2 support
-DT2W/S2W features
-Selinux enabled in permissive mode by default
-WQ Power Efficient tweaks
-State notifier driver added
-Fix some memory leaks
-Many more optimizations for performance and battery saving (check source)
Important: use the kernel adiutor application to tune
Click to expand...
Click to collapse
Download:
https://www.androidfilehost.com/?fid=745425885120710252
**No mirrors please**
Click to expand...
Click to collapse
How to install:
-Paste the zip on internal memory
-Install zip with twrp recovery
-Reboot and Enjoy :good:
Click to expand...
Click to collapse
New Build Evolution Kernel_R10, FOR NOUGAT ROMS 7.1.x ONLY, NO MARSHMALLOW
-
Linux code updated to lastest LineageOS source: 3.4.113 :good:
- Based on a new clean source for greater stability
- Compiled with latest simple GCC 4.8 (great for this) :good:
- Some optimizations for kernel compression (lzma)
- Many optimization for memory usage and reduce Lag
- Added Customs TCP
- Lzma compression (very nice)
- No more useless mods
- Added and improved SIO, SIOPLUS, VR, ZEN v2 I/O schedulers and default BFQ, etc...
- Row I/O scheduler is recommended by me :good:
- Added toggles for wakelocks
- MSM Hotplug stable rules (Nice deep sleep Now)
- Powersuspend updated (Use in Hybrid mode)
- Kcal v2 support
-Dt2w added but does not work for the moment (disable)
- Selinux enabled in permissive mode by default
- WQ Power Efficient tweaks
- State notifier driver added
- Lcd notify driver Removed (NO MORE START SCREEN FREEZE)
- New Governors added: zzmoove, Xperience by @TeamMex , Bioshock, Lionheart and ElementalX (testing)
- Interactive and Ondemand governor updated for better efficiency
- Added Sound Control v3.6
- Fast Charge enable by default
- Fix memory leaks for better perfomance
- Many more optimizations for performance and battery saving (check source)
- New TCP congestion driver called AsCaRex by @TeamMex Added
AsCaRex employs end-to-end bandwidth measurements to set cwnd and ssthresh after packet loss. The probing phase is as the original Reno, have a modified control mechanism for use with large congestion windows. A table indicates how much to increase the congestion window when an ACK is received.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Important: Use the kernel adiutor application to tune this kernel
Evolution Turbo Kernel Oreo Updated
-Kernel build with QUVNTNN 6.4 2018.01 Custom ToolChain
-Improved Cortex-A7 configs
-Improved XZ kernel compression
-def_config regenerate
-Updated cpufreq and gpu drivers configs for better performance
-Welcome again MP_Decision Hotplug
-Spinlocks changes
-Significant lag in oreo reduced
-Simple Adreno GPU algorithm added
-New governors distribution: Default govs, XPerience, SmartMax and BioShock govs
-Out DT2W for now
-All TCP cong is activated (AsCaRex default)
-Many more changes for you..
Source: https://github.com/willizambrano/android_kernel_motorola_msm8226
If you like, support me with a small contribution : http://paypal.me/willizambrano
Download: https://www.androidfilehost.com/?fid=962187416754469095
How to install:
-Paste the zip on internal memory
-Install zip with twrp recovery
Backup of you stock boot.img
-Reboot and Enjoy :good:
If you like my work, contribute for more updates please:
Suggestions for balance perfomance/battery
-Use interactive gov with hispeedfreq on 787mhz and min freq 300mhz....
-For more conservative use Bioshock or SmartMax governor and min freq 300mhz
-Sheduler Maple, Row of BFQ
-In misc features select suspension mode on hybrid (default) and TCP select AsCaRex or westwood
Version Information
Status: Beta Evo Turbo for Oreo Roms
Release Date: 2018-03-19
thanks for your work. i will give it a try and will feedback.
Looks promising. Gonna try it
ralp88 said:
thanks for your work. i will give it a try and will feedback.
Click to expand...
Click to collapse
Thanks bro, waiting you feedback
FortoszoneID said:
Looks promising. Gonna try it
Click to expand...
Click to collapse
Thanks , enjoy!
great piece of work
pico hackr said:
great piece of work
Click to expand...
Click to collapse
Thanks for you feedback
Running smoothly on crDroid 7.1 :good:
Can it be used with slim 7.1 ?
justbfree said:
Can it be used with slim 7.1 ?
Click to expand...
Click to collapse
Yeah, work on slim 7.1
Thanks for the work!
Keep it up
Will try and report
What is the expected SoT
willizambrano01 said:
Yeah, work on slim 7.1
Click to expand...
Click to collapse
It doesn't work , system UI FC .
Very good kernel :good:
I only miss DT2W feature..
Edit: @willizambrano01 i like your kernel, but i'm on latest CM14.1 nightly so i can't use data tethering with your kernel. Default CM kernel, tether working fine. Could you fix? Thanks
Aguys said:
Very good kernel :good:
I only miss DT2W feature..
Edit: @willizambrano01 i like your kernel, but i'm on latest CM14.1 nightly so i can't use data tethering with your kernel. Default CM kernel, tether working fine. Could you fix? Thanks
Click to expand...
Click to collapse
That wasn't Kernel problem. Tethering was broken in CM build itself. I think they have fixed in latest build.
Megatron27 said:
That wasn't Kernel problem. Tethering was broken in CM build itself. I think they have fixed in latest build.
Click to expand...
Click to collapse
But, I already on 12/10 build. With default CM kernel tethering working fine, with this kernel broken...
Can u add double tap to wake feature?
Aguys said:
But, I already on 12/10 build. With default CM kernel tethering working fine, with this kernel broken...
Click to expand...
Click to collapse
Thanks bro, I fix on next build
Allstargaurav said:
Can u add double tap to wake feature?
Click to expand...
Click to collapse
In next build bro
I'll try it soon, but which ROM do you recomend for me to use with, focusing in performance?
Best hotplug?
.
.
.
.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This kernel focuses on STABILITY. I wont be adding things which I deem isn't necessary. Futher, there wont be false claim like epic battery or ultimate performance etc.
No ETA!!!
Compatibility:
Custom roms based on Orep and Pie
MIUI builds can be found below, but won't be supported.
Features:
Based on LA.UM.7.2.r1-05500-sdm660.0 caf tag
Up-to-date with latest linux kernel base (4.4.166)
Compiled with CLANG 7.0.x
"Legendary" battery life *Pun intended*
Double tap to wake [Thanks to @vasishath]
Sound Control (Thanks to @shekhawat2)
KCAL support
Added Adreno boost
WireGuard support
And many more!
I would like to thank these amazing people for all their help and contributions!
@Shahan_mik3
[* @vasishath
[* @frap129
[* @nathanchance
@akhilnarang
@AxelBlaz3
[* @shekhawat2
@Ajmy_znr
@Venu_GopalU (The Super Cool Logo)
All the devs from whom i kanged
This awesome community
Ping me if I missed anyone
Installation:
Download the zip
Flash it using any recovery
Tweak it as you like with kernel managers like EX Kernel Manager!
I would like to thank @nathanchance for his work on android-linux-stable which is of great help to noobs like me!
Download Link:
R2.4 Link : https://www.androidfilehost.com/?fid=11410963190603870739
https://drive.google.com/folderview?id=1O-s2sAj7-Y4VJfKK49RTbjbLjbfoTfxw
MIUI Builds : https://androidfilehost.com/user/?w=settings-dev-files&flid=279267
Spectrum App:https://www.androidfilehost.com/?fid=5862345805528051894
Note: I have changed some strings to change the profile naming. No other changes are there in the app
All credits for spectrum goes to @frap129 . I have uploaded the changes to my git.
Older Builds : https://www.androidfilehost.com/?w=files&flid=274260
Telegram Group: Invite Link
Like my work? Nice!
XDA:DevDB Information
NoName Kernel, Kernel for the Xiaomi Redmi Note 5 Pro
Contributors
mihran_thalhath
Source Code: [url]https://github.com/mihranz7/kernel_xiaomi_whyred[/URL]
Kernel Special Features: LEGENDARY BATTERY BACKUP if you connect to the charger!
Version Information
Status: Stable
Current Stable Version: v2.4
Stable Release Date: 2018-12-09
Beta Release Date: 2018-12-09
Created 2018-06-04
Last Updated 2018-12-09
Changelog r2.4
- Merge in linux-stable 4.4.166
- Merge latest caf tag LA.UM.7.2.r1-05500-sdm660.0
- Remove OC/UC
- Remove spectrum support for now
- Remove the extra governors
- Remove the extra IO scheds
- CPU Input Boost
- and many other things...
Changelog r2.2
- Merge in linux-stable 4.4.159
Changelog r2.1
- Merge in 4.4.158
- Merge latest caf tag LA.UM.7.2.r1-04900-sdm660.0
Changelog r2.0:
- Rebased on Pie caf tag
- Upstreamed to 4.4.157
- Enabled CPU Boost
- Many misc changes
Changelog r1.8:
- Upstream to 4.4.145
- Merge latest caf tag LA.UM.6.2.r2-04800-sdm660.0
- Add sound control (Thanks to @shekhawat2)
- Fix issues with spectrum profiles
Note: People on P Semi-GSI need to set profiles on each reboot because P Semi-GSI doesn't save the last used profiles for some reason.
Changelog r1.7:
- Upstream to 4.4.143
- Update spectrum profiles
- Reduce voltages a bit
Changelog r1.6:
- Add Spectrum support (Download Spectrum App from the link in OP as it has some strings modified)
- Upstream to 4.4.141
- Merged latest caf tag
- Remove CPU boost
- Add Simple GPU algorithm
Changelog r1.5:
- Upstreamed to 4.4.140
- Merged latest caf tag
- Fix issues with WiFi (Thanks to @akhilnarang)
- Move to SDFAT driver
- Other changes
OC version:
- Added 2.2Ghz step
Changelog r1.4:
*Add Darkness cpu governor
*Add Chill cpu governor
*Add row io sched
*Add more frequencies to both cluster [Only on OC version]
*Various other optimizations
Changelog r1.3:
*Upstream to 4.4.138
*Enforcing by default
*Add fingerprint boost driver
*Add Alucard governor
*Support for TTL fixation
*Various other changes
Changelog r1.2 :
*Merge latest LA.UM.6.2.r2-03900-sdm600.0 caf tag
*Merge latest kernel base (4.4.136) (Thanks to @Shahan_mik3)
*Add tripndroid governor
*Fix exfat support (Try and report)
* various other improvements
Changelog r1.1F :
*Fixes video focusing issues (thanks to miui devs for finally releasing the fix)
*Added Adreno Idler
*Disabled fsync by default
*Enabled a few tcp cong algo's and made westwood as default
*Various other improvements
This kernel is based on @Shahan_mik3 's and @vasishath 's amazing work!
https://github.com/Whyred-Dev/android_kernel_xiaomi_sdm660
I am using DERP kernel as the base now. Credits go to @akhilnarang
Gonna check if wifi is working. (some reports problems on other custom kernels).
Another custom kernel release
Thank you dev :good:
Will try it as soon as possible when link will be available
Is this a overclock kernel? Cause you say "adreno boost", I don't understand what it is…
OP updated with download links! Enjoy!
ZHQzhq087 said:
Is this a overclock kernel? Cause you say "adreno boost", I don't understand what it is…
Click to expand...
Click to collapse
Nop it doesn't support OC for now. Adreno boost means boosting gpu performance!
mihran_thalhath said:
OP updated with download links! Enjoy!
Nop it doesn't support OC for now. Adreno boost means boosting gpu performance!
Click to expand...
Click to collapse
Thanks. I know it's about GPU, but without overclocking, boosting performance seems difficult……
Small size comparing to most known.
ZHQzhq087 said:
Thanks. I know it's about GPU, but without overclocking, boosting performance seems difficult……
Click to expand...
Click to collapse
Even without overclocking, i don't have any issues with the performance of whyred.
mihran_thalhath said:
Even without overclocking, i don't have any issues with the performance of whyred.
Click to expand...
Click to collapse
That's true though
Nice work ?
**Legendary Battery backup **
Thank you so much for sharing .
nice work.....long list of features for a first build
Wifi, bluetooth, & Fingerprint works fine. Will report the battery life later
Nice work ??
Battery backup is noticable in just a few hours... literally good!!
Anyone experiencing Instagram keep crashing? Or it's rom related? I'm on AOSP extended.
edit : SOLVED
Is there anything that could be done to prevent the safetynet trip in the kernel?
Battery Backup is ?