Hi everyone... I have an asus tf700t and I was wondering if I can charge it using the belkin mini surge protector with usb charger ( w**.belkin.com/us/p/P-BZ103050-TVL )? I just wanna make sure if it would be ok plugging the usb cord straight to the usb socket of this belkin usb socket. I carry a lot of gadgets with me whereever I go so I kinda feel that it would be bulky carryng a lot of chargers for my cellphone, laptop... etc. Would this be safe? I just experienced last week someone's charger got toasted using a public wall socket using the original charger. Thats why I thought of buying a surge protector as well. Thank you.
Depends on what you mean. Do you mean skip the Asus wall plug and use the usb ports on this protector? Then the answer is no. The usb ports on any device you use to charge the tablet needs to be usb 3.0 and supply the needed 15v of power. All of the usb plugs that are sold are made for 2-5v devices. If there is one that does supply the 15v then I have not seen it and many people using this forum would probably love to purchase it. You've stated one main reason to buy something like this, limiting the number of plugs to carry around, but it's also like $40 bucks to buy another plug from Asus.
That 2-5v is enough to charge cell phones, gps units, apple products, other tablets that don't use a proprietary power plug, etc. It may supply a small trickle of power similar to hooking up the device to a computer while the tablet is powered off. That would take hours to charge the device and not what you are looking for. I think one of the advantages Asus went for in using usb 3.0 and 15v is the speed of which the device can charge. It is pulling more power and able to delivery it to the battery faster. That is my guess but it is limiting our after market choices.
Now if you mean use that as added protection and have the Asus plug plugged into it, then yes it will work. If you are concerned about pulling too much power through it then don't have the device hooked up to it and use all of the other ports on the protector at the same time. That little device does seem neat. I lost an a/c adapter for my laptop when lightening struck really close to my hotel. Fried the power brick but luckily the laptop was not damaged. At work and at home I use a power strip/surge protector when plugging in the tablet to charge.
fsured said:
Depends on what you mean. Do you mean skip the Asus wall plug and use the usb ports on this protector? Then the answer is no. The usb ports on any device you use to charge the tablet needs to be usb 3.0 and supply the needed 15v of power. All of the usb plugs that are sold are made for 2-5v devices. If there is one that does supply the 15v then I have not seen it and many people using this forum would probably love to purchase it. You've stated one main reason to buy something like this, limiting the number of plugs to carry around, but it's also like $40 bucks to buy another plug from Asus.
That 2-5v is enough to charge cell phones, gps units, apple products, other tablets that don't use a proprietary power plug, etc. It may supply a small trickle of power similar to hooking up the device to a computer while the tablet is powered off. That would take hours to charge the device and not what you are looking for. I think one of the advantages Asus went for in using usb 3.0 and 15v is the speed of which the device can charge. It is pulling more power and able to delivery it to the battery faster. That is my guess but it is limiting our after market choices.
Now if you mean use that as added protection and have the Asus plug plugged into it, then yes it will work. If you are concerned about pulling too much power through it then don't have the device hooked up to it and use all of the other ports on the protector at the same time. That little device does seem neat. I lost an a/c adapter for my laptop when lightening struck really close to my hotel. Fried the power brick but luckily the laptop was not damaged. At work and at home I use a power strip/surge protector when plugging in the tablet to charge.
Click to expand...
Click to collapse
Ok tnx for the input. Just wanted to be sure if it would not harm the device if I use the usb wire without the charger adapter that came with asus but rather plug the usb cable directly to the belkin usb socket. Being stated that the tf700t is usb 3 and 15v is needed, will the belkin suffice to charge the device using its usb slot for charging without causing any harm? The spec says in belkin mini surge protector is 5V/500mA each usb port.
MasterYodaMD said:
Being stated that the tf700t is usb 3 and 15v is needed, will the belkin suffice to charge the device using its usb slot for charging without causing any harm? The spec says in belkin mini surge protector is 5V/500mA each usb port.
Click to expand...
Click to collapse
It should work and do no harm, but it will be very very slow - maybe 5% per hour...
fsured said:
Depends on what you mean. Do you mean skip the Asus wall plug and use the usb ports on this protector? Then the answer is no. The usb ports on any device you use to charge the tablet needs to be usb 3.0 and supply the needed 15v of power. All of the usb plugs that are sold are made for 2-5v devices. If there is one that does supply the 15v then I have not seen it and many people using this forum would probably love to purchase it. You've stated one main reason to buy something like this, limiting the number of plugs to carry around, but it's also like $40 bucks to buy another plug from Asus.
That 2-5v is enough to charge cell phones, gps units, apple products, other tablets that don't use a proprietary power plug, etc. It may supply a small trickle of power similar to hooking up the device to a computer while the tablet is powered off. That would take hours to charge the device and not what you are looking for. I think one of the advantages Asus went for in using usb 3.0 and 15v is the speed of which the device can charge. It is pulling more power and able to delivery it to the battery faster. That is my guess but it is limiting our after market choices.
Now if you mean use that as added protection and have the Asus plug plugged into it, then yes it will work. If you are concerned about pulling too much power through it then don't have the device hooked up to it and use all of the other ports on the protector at the same time. That little device does seem neat. I lost an a/c adapter for my laptop when lightening struck really close to my hotel. Fried the power brick but luckily the laptop was not damaged. At work and at home I use a power strip/surge protector when plugging in the tablet to charge.
Click to expand...
Click to collapse
One correction please. Its not usb 3.0. Its just usb 2.0. Check for the specs on asus site.
king231 said:
One correction please. Its not usb 3.0. Its just usb 2.0. Check for the specs on asus site.
Click to expand...
Click to collapse
It's a USB 3 plug, and the additional lines are somehow used by the Asus charger for detecting the tablet and switching the voltage.
_that said:
It's a USB 3 plug, and the additional lines are somehow used by the Asus charger for detecting the tablet and switching the voltage.
Click to expand...
Click to collapse
Oh! I was talking about the tablet. If the tablet had USB 2.0 why would the plug be of USB 3.0.
Related
As the cable is too short, I attached an extension cable.
However, now it does not charge. If i connect the short cable that came with the Transformer, it charges fine. Any suggestion?
The TF101 "short cable" as you call it, is a USB3 cable, what has +5 pins inside. One of these pins control the 15V charging (the tablet takes 15V from the charger instead of the usual 5V USB), if it can not send the signal through, it won't charge. You need a USB3 extension cable what's pretty expensive though.
Get this one or a similar one. As you can see, 2 reviewers vouch that this cable works.
http://www.amazon.com/StarTech-6-Fe...1?s=electronics&ie=UTF8&qid=1316952334&sr=1-1
ondoy1943 said:
Get this one or a similar one. As you can see, 2 reviewers vouch that this cable works.
http://www.amazon.com/StarTech-6-Fe...1?s=electronics&ie=UTF8&qid=1316952334&sr=1-1
Click to expand...
Click to collapse
I can vouch for it, too.
Got on of this USB 3 cable while at HK and work without any problem.
Thank you guys. Will be purchasing one. I am guessing Belkin F7C008QAF Conserve Valet USB Charging Station - Energy Saving wont be working with this :/
That is correct, because the transformer looks for termination of one of the usb 3 pins, if you plug it into a usb 2.0 or lower extension/hub it just wont work. You must have a usb 3 extension/hub, or, there are many DIY chargers that are probably cheaper than a usb 3 extension cable and definately cheaper than a usb 3 hub.
Even a usb 3.0 hub or charging station will not charge it. Usb does not provide the voltage required. Only the outlet adapter will work
Sent from my mopho
Are you saying that my cigarette outlet will be the only thing that charges this?
It won't charge it all with anything unless turned off. Guess I need to make a hybrid cable
Posted on the fly with my XPLOD Evo4G
I am going for a trip, and I want to reduce the number of things I carry with me, and I was wondering if I can use the Asus TF101 charger to charge other devices that plug to usb, like my mobile phone.
I know that the TF101 charger gives more power than normal chargers through the USB3 cable (Required by the device, otherwise it will not charge), but if I plug a usb2 cable and plug my phone, will it charge or fry it?
I wouldn't use the charger, I'd use a usb port on the dock, personally. I'm just paranoid though, it should be fine since the limit on 2.0 is 5v
Thing O Doom said:
I wouldn't use the charger, I'd use a usb port on the dock, personally. I'm just paranoid though, it should be fine since the limit on 2.0 is 5v
Click to expand...
Click to collapse
I don't have the dock , that's why I am asking
Yes, I do that all the time to reduce the number of charging bricks I carry. If Asus only had the foresight to make it a dual port!
There is a DIY charger thread that also has lots of information about how the charger works. If I recall correctly, it puts out standard 5V normally. When the TF cable is plugged in, it actually shorts out certain pins in the USB 3.0 plug and that signals the power brick to kick up the voltage to 1.21 gigawatts that are needed to charge the TF. A standard USB 2.0 plug won't be able to short out the pins so the voltage will stay at 5V.
Edit: Here's the thread http://forum.xda-developers.com/showthread.php?t=1087321
Be sure to thank DevCake - he did a lot of great work in this thread.
I had read that at some point, but I wasn't 100% sure as I couldn't find it. Thanks for clarifying xB
Thanks, that's exactly what I wanted.
I read the charger post long ago, but I was unable to find it today.
Just using a lower power point to charged it...
I was planning on using my iPad charger to charge my phone, iPad, and TF700 while on the road. It puts out more than enough current at +5 volts but doesn't work with the TF700. The Asus charger outputs +15 and +5 and works with the Asus cable and an OEM cable, and also works charging my phone using a micro-B cable. Is the TF700 charged using +15 volts?
The TF700 booklet says it can be charged from a USB port, which is +5 volts. While that may be an impossible task on a PC, it still means that the TF700 can be charged using a USB cable and +5 volt charger. Why doesn't it work? Has anyone gotten a 2A +5V OEM charger to work with the TF700? Is there a pinout diagram for the Asus cable and charger anywhere? Thanks.
Not sure if this helps, but the keyboard dock (unlike the tablet itself) can only be charged from the charger, not usb, so it must draw more power than a standard usb.
It's also possible your Apple charger usb port is pinned to only work with "apple approved" products? Have you been able to charge other devices from it?
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
phiffoo st o
Studiozut said:
Not sure if this helps, but the keyboard dock (unlike the tablet itself) can only be charged from the charger, not usb, so it must draw more power than a standard usb.
It's also possible your Apple charger usb port is pinned to only work with "apple approved" products? Have you been able to charge other devices from it?
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
Click to expand...
Click to collapse
I don't have a dock nor am I trying to charge the TF700 from a PC USB port. The Apple charger puts out +5 volts to anything plugged into to it and the TF700 apparently "knows" when the Apple charger is connected to it because it turns on if it's off.
Haidozo said:
I was planning on using my iPad charger to charge my phone, iPad, and TF700 while on the road. It puts out more than enough current at +5 volts but doesn't work with the TF700. The Asus charger outputs +15 and +5 and works with the Asus cable and an OEM cable, and also works charging my phone using a micro-B cable. Is the TF700 charged using +15 volts?
The TF700 booklet says it can be charged from a USB port, which is +5 volts. While that may be an impossible task on a PC, it still means that the TF700 can be charged using a USB cable and +5 volt charger. Why doesn't it work? Has anyone gotten a 2A +5V OEM charger to work with the TF700? Is there a pinout diagram for the Asus cable and charger anywhere? Thanks.
Click to expand...
Click to collapse
It will charge VERY SLOWLY on 5v USB while turned off. Will not charge via 5v USB while on. The TF700 requires at least 12V/2A to charge while on. 15V/1.2A is what's recommended by Asus (based on their proprietary charger specs).
Here's a battery I use to charge my TF700 while on the go, and it also charges my phone, BT headsets and other devices. http://forum.xda-developers.com/showthread.php?t=1796750. Great battery, I highly recommend it.
AspenMan said:
It will charge VERY SLOWLY on 5v USB while turned off. Will not charge via 5v USB while on. The TF700 requires at least 12V/2A to charge while on. 15V/1.2A is what's recommended by Asus (based on their proprietary charger specs).
Here's a battery I use to charge my TF700 while on the go, and it also charges my phone, BT headsets and other devices. http://forum.xda-developers.com/showthread.php?t=1796750. Great battery, I highly recommend it.
Click to expand...
Click to collapse
You are correct. With the TF700 turned off, an hour of charging with the 2A Apple charger had increased the battery level from 29% to 34%. I expect the TF700 to be fully charged in only 14 hours!
Thanks.
Have you considered a power inverter? I use this one with my A100 though I use a FM transmitter to charge my phone.
Somewhat related to this: in the past, when using devices that have a power block with a USB port and a charge/sync cable, such as an iPod or even my Galaxy Nexus, I've used a USB extension cable to give me a little extra slack. For some reason, that doesn't seem to work with the Infinity. I've tried three different USB extension cables and the tablet never shows that it's charging. Is there a certain USB cable I can use for this?
AspenMan said:
It will charge VERY SLOWLY on 5v USB while turned off. Will not charge via 5v USB while on. The TF700 requires at least 12V/2A to charge while on. 15V/1.2A is what's recommended by Asus (based on their proprietary charger specs).
Here's a battery I use to charge my TF700 while on the go, and it also charges my phone, BT headsets and other devices. http://forum.xda-developers.com/showthread.php?t=1796750. Great battery, I highly recommend it.
Click to expand...
Click to collapse
I have that same exact charger. do you use the "I" or the "S" USB port?
I never knew what the difference between the two were
EDIT...i shouldve read the thread lol...you modified yours
I ordered a pair of cables from eBay item # 320942102464. A house charger and a car charger. I just plugged in the dock and seems to be working fine.
USB 3.0?
FrontRowJoe said:
Somewhat related to this: in the past, when using devices that have a power block with a USB port and a charge/sync cable, such as an iPod or even my Galaxy Nexus, I've used a USB extension cable to give me a little extra slack. For some reason, that doesn't seem to work with the Infinity. I've tried three different USB extension cables and the tablet never shows that it's charging. Is there a certain USB cable I can use for this?
Click to expand...
Click to collapse
Are you using a USB 2.0 or 3.0 extension cable? It's my understanding that the Infinity uses USB 3.0.
You need 15v to charge the Pad (I kept thinking 11, but the adapter says 5V or 15V output). This makes sense since there are more pins. Standard USB has 5v rails (ther are 4 pins, I 5v power, Data+, Data-, ground). Since our chargers are 40 pins, my assumption is that there are more pins dedicated to charging and multiple pins dedicated to data (possibly a few that are dedicated and some that are for whatever data is being passed through (assumption)). If the adapter is outputting 11v then it can send more power through the cord and multiple pins can push electricity through. When you are only pulling 5v (i.e. most AC->USB transformers) you will need a lot more time to charge, hence the trickle effect (and don't turn on the screen!)
It can be charged with 5v if the tablet is off.
There is a jumper in the USB cable itself that kicks the Asus charger into 15v mode so it doesnt accidentally fry your devices if you plug in, say, your cell phone to charge for a bit.
To make a custom cable just throw 15v across three pins in the connector (5v each). You can find all the info here: http://forum.xda-developers.com/showthread.php?t=1633747
Yes, i know its for the prime, the connector is exactly the same, the pinouts SHOULD be identical.
DIY approach?
I've got a TF700T and a TF201 dock and a misplaced charger. I ran into the same trouble that a lot of people here did ....... generic chargers not working, USB on my computer only trickle charges the tablet, nothing for the dock, etc.......
After much poking around I learned that both require 12 volts to charge. That said I dug thru my junk and found a 2.2a 12v DC wallwart. I hacked apart a USB extension cable for it's female end, broke out my breadboard and put together a 12v USB connector... that after several days of charging and draining.... charging and draining .... works like a champ.
So to be a bit more specific, pin 1 that's normally 5+ volts I'm supplying 12+. Pin 4 is ground same as always and that's it. If you wish let me know I can probably throw up a little illustration or something.
Since I did that I've refined the whole thing a bit, cleaned it up, wired everything directly and heat shrinked the whole assembly.
It will charge both together or either one by itself in just hours EVEN while using them..... heavily. No overheating, no troubles.
HTH
AnakiMana said:
Are you using a USB 2.0 or 3.0 extension cable? It's my understanding that the Infinity uses USB 3.0.
Click to expand...
Click to collapse
I think the cable type might only matter after the ics.30 update when I was on the ics.26 I could use a standard extention cable, I had my device plugged in when I updated and my device stopped charging, and I freaked out thinking I broke something. But after finally removing the extention my tablet would charge. I have not tried to use the extention cable since so I don't know if it works with jb.
Asus Transformer Infinity running CleanRom 2.7.x
Bluemgt06 said:
I think the cable type might only matter after the ics.30 update when I was on the ics.26 I could use a standard extention cable, I had my device plugged in when I updated and my device stopped charging, and I freaked out thinking I broke something. But after finally removing the extention my tablet would charge. I have not tried to use the extention cable since so I don't know if it works with jb.
Asus Transformer Infinity running CleanRom 2.7.x
Click to expand...
Click to collapse
The Asus charger switches its output to 15V from 5V when a USB3 plug is detected. If you need an extesion cable to charge the Transformer, you'll have to use USB3 extension cable. If you want to use this charger on other devices, be sure to use a USB2 cable to not to fry it with 15V.
Kraka said:
If you want to use this charger on other devices, be sure to use a USB2 cable to not to fry it with 15V.
Click to expand...
Click to collapse
Thanks for the warning - I hope there are no cables with USB3 and micro-USB2 plugs though.
I really like my Transformer, but the lack of charging options is an issue.
I'm looking for a dual usb port wall charger (a similar car charger would be great) that will output the 15v needed by the Asus tablets. I don't mind bringing extra cords, but don't want to carry a bunch of wall warts with me when I travel and I have a lot of other USB devices. I'd prefer one without a permanent cord. Anyone found one that works?
The trickle charge options aren't effective since even overnight I only get 20% or so of charge.
What exactly are you trying to do...
The supplied charger charges both dock & Tablet where as the usb will only charge tablet..
Am I missing something?
7495 said:
I really like my Transformer, but the lack of charging options is an issue.
I'm looking for a dual usb port wall charger (a similar car charger would be great) that will output the 15v needed by the Asus tablets. I don't mind bringing extra cords, but don't want to carry a bunch of wall warts with me when I travel and I have a lot of other USB devices. I'd prefer one without a permanent cord. Anyone found one that works?
The trickle charge options aren't effective since even overnight I only get 20% or so of charge.
Click to expand...
Click to collapse
You can safely use the Asus charger to charge all your other devices..
And if you have the tab with dock, you can hook another device to be charged up to the USB port of the dock. As long as the tab is docked and on, the dock USB will output 5V.
I believe He's asking if there are other USB chargers with more than one port that meet the TF700s power needs.
re: dual USB Port Chargers
BinaryW01f said:
I believe He's asking if there are other USB chargers with more than one port that meet the TF700s power needs.
Click to expand...
Click to collapse
That's it exactly. Previously I was able to travel with just a single 4 port USB charger (something like the Skiva PowerFlow QuadFire) which would charge my iPad, phone, camera, and a travel router while only taking up a single wall outlet (which also means only a single plug converter for overseas). I'd love to do the same with the TF700, but would settle for a dual USB port charger (one to port charging the TF700 and one to charge my phone, simultaneously).
While I can charge my phone from the dock's USB port I don't always have the dock with me and it doesn't allow me to maximize untethered usage. Generally I use the dock as an extended battery (assuming I'm not using remote desktop or the card reader) - docking the tablet to charge it, then plugging the dock into the charger while I continue to use the undocked tablet. If the dock supplied power to the USB port without the tablet attached I'd be fine, but no such luck.
Anyway, like many, the goal with the transformer is to minimize the weight and "stuff" I have to carry (in my case a laptop). If I could reduce things further by dropping a dedicated charger for one that served many purposes at the same time it would be great. Something like the Anker Astro3 battery back up but smaller and without the battery would work well.
Maybe, try this one...you could charge your Transformer, because of the DC Output, your Notebook and of course other USB Devices...
I think he mightve wanted something like thiswww.buy.com/prod/apricorn-ausb-y-usb-power-adapter-y-cable-3-28ft/q/loc/101/202641110.html. It doesnt give any tech specs, however it states that it would increase the output power. So I would assume the volts would stay the same, but you might get more amps from usb. Unfortunately, it would just be a faster trickle charge.
Sent from my SPH-L900 using xda app-developers app
7495 said:
I really like my Transformer, but the lack of charging options is an issue.
I'm looking for a dual usb port wall charger (a similar car charger would be great) that will output the 15v needed by the Asus tablets. I don't mind bringing extra cords, but don't want to carry a bunch of wall warts with me when I travel and I have a lot of other USB devices. I'd prefer one without a permanent cord. Anyone found one that works?
The trickle charge options aren't effective since even overnight I only get 20% or so of charge.
Click to expand...
Click to collapse
I got a couple of these from Meritline:
http://www.meritline.com/inland-nss13-wall-tap-surge-protectors---p-73426.aspx
I use my charger that came with the transformer in the main plug and the USB ports for my phone and Kindle. I got two from Meritline and brought a third at Target. You still need the Transformer charger but at least you get two more USB ports.
I'm using the stock charger but the cable is a bit short for me. I have two 3' USB extension cables but neither of them allow the tab to charge. The tab lights up as though I plugged the charger in but it doesn't ding nor does it actually charge. That are standard extensions and work with my Kindle & various HTC cell phones but not my TF300T. Anyone know why or could someone suggest a brand/type of USB extension cable that would work? I am also comfortable with buying a new one and rewiring or swapping wires on it if need be or buying wire and 2 ends and soldering it myself.
Since the tab is 15v and USB is 5v I'm guessing they swapped a wire somewhere in the plug to allow for more voltage.
Thoughts?
Kipper667 said:
I'm using the stock charger but the cable is a bit short for me. I have two 3' USB extension cables but neither of them allow the tab to charge. The tab lights up as though I plugged the charger in but it doesn't ding nor does it actually charge. That are standard extensions and work with my Kindle & various HTC cell phones but not my TF300T. Anyone know why or could someone suggest a brand/type of USB extension cable that would work? I am also comfortable with buying a new one and rewiring or swapping wires on it if need be or buying wire and 2 ends and soldering it myself.
Since the tab is 15v and USB is 5v I'm guessing they swapped a wire somewhere in the plug to allow for more voltage.
Thoughts?
Click to expand...
Click to collapse
You have to use a USB 3.0 extension cable.
Seriously? That's it? Man, I feel like a dummy. It never would have occurred to me that 3.0 was necessary. Thank you for the help!
Kipper667 said:
Seriously? That's it? Man, I feel like a dummy. It never would have occurred to me that 3.0 was necessary. Thank you for the help!
Click to expand...
Click to collapse
Yep that is it.
I bought my USB 3.0 extension cable from www.caseen.com. They also carry the stock chargers, cables and a couple other items that I was unaware even existed (a 2 port USB hub that plugs into the USB on your TF300T dock WITH an Ethernet port so you can connect DIRECTLY instead of staying wireless!). Fairly decent pricing and fast shipping.