Related
Welcome to HARMONY for JellyBean
This is my Harmony Kernel for Android OS 4.1 aka JellyBean
Most things are backported, but I need people to test this and give me a logcat for error reporting.
Please note ntfs will not work as of now, until I integrate it in an AOSP rom.
Features :
OC'able up to 1.6 GHZ
Static GPU OC for better grpahics performance on stock voltage
Simple I/O Scheduler added
Governors added : Intellidemand, SmartAssv2, Wheatly, Powersave
ReadAhead Value tweaked
Some boot speed optimizations
Some tweakings at compile time
Jelly Bean (4.1) ramdisk
VooDoo Sound Driver !
DOWNLOADS
Downloads at my GITHUB .
#stable (GitHub release)
Fixed power management
Fixes on SoD's and some ugly battery drain for governors
ramdisk modded
VooDoo sound integrated
#test
initial release for Android 4.1
Basic features ported, some exclusive ones added
New, selfmade ramdisk for JellyBean (DHCP should work now
Thats great, thanks! Will it work with CM10?
linuques said:
Thats great, thanks! Will it work with CM10?
Click to expand...
Click to collapse
You can try. But there's a chance of WiFi to be broken, because Rayman (formerly Rayman84) and his team use the old WEXT WiFi driver for some reason.
Every other AOSP-based rom uses the newer NLx WiFi driver. So this works on every AOSP rom, other than CM10 (unless they change WiFi driver or I get my hands on this)
If you report WiFi not to work, I will fix it.
Thank you sir you are the man keep kicking a##. No kernel to down load?
philseven said:
Thank you sir you are the man keep kicking a##. No kernel to down load?
Click to expand...
Click to collapse
http://goo.im/devs/rayman33/downloads/Transformer/Harmony-Kernel/Harmony-JELLY.zip
Try this.
Not working on CM10. Stuck at boot.
boooted with eos3 running max 1504 min 312 intelidemand with sio.
same issue as above post with cm10 stays at boot animation.
gonna run the eos setup for awhile will report back with any issues
linuques said:
Not working on CM10. Stuck at boot.
Click to expand...
Click to collapse
Then you have to help me.
Please grap a file over adb for me.
Code:
adb pull /proc/config.gz
Then upload the config.gz file for me and I'll get it working.
I would but I don't know how.
rayman33 said:
Then you have to help me.
Please grap a file over adb for me.
Code:
adb pull /proc/config.gz
Then upload the config.gz file for me and I'll get it working.
Click to expand...
Click to collapse
Eos 3 build #45 config.gz
rayman33 said:
Then you have to help me.
Please grap a file over adb for me.
Code:
adb pull /proc/config.gz
Then upload the config.gz file for me and I'll get it working.
Click to expand...
Click to collapse
Here is a link to the config.gz for cm10 preview:
http://db.tt/Ci17SXRX
sidneyk said:
Here is a link to the config.gz for cm10 preview:
http://db.tt/Ci17SXRX
Click to expand...
Click to collapse
k, thanks, now please extract the kernelblob file from the CM10 zip file and upload it for me (need the ramdisk).
rayman33 said:
k, thanks, now please extract the kernelblob file from the CM10 zip file and upload it for me (need the ramdisk).
Click to expand...
Click to collapse
Here is the link for the blob from cm10 preview:
http://db.tt/Xvqk6Dhi
ignore this problem fixed
Has the kernel been fixed for c10 yet
philseven said:
Has the kernel been fixed for c10 yet
Click to expand...
Click to collapse
not yet
Remember how I said that the harmony kernel was making my tablet panic and freeze with that loud buzzing sound with any frequency over 1200mhz? Well I flashed this just a while ago with your (raymans) jb asop #2 and I've been running at 1600mhz ever since. Thanks so freaking much!
I'm wondering about one thing though... and not surrounding if anyone has experienced this with the same kernel-rom combo. After waking up from deep sleep, wifi no longer works and requires reboot. Could this be due to the kernel or rom? Ill deal with it as long as I have to because even with that problem it is awesome.
Thanks!
Sent from my Transformer TF101 using Tapatalk 2
I tried messing with it and turned off the wifi in settings. Froze the tablet requiring a reboot. Ill get you a logcat tomorrow.
Sent from my Transformer TF101 using Tapatalk 2
bcrowie said:
I tried messing with it and turned off the wifi in settings. Froze the tablet requiring a reboot. Ill get you a logcat tomorrow.
Sent from my Transformer TF101 using Tapatalk 2
Click to expand...
Click to collapse
Ive experienced your issue and the one posted above.
Problem 1: When waking from deep sleep wifi sometimes will not work or tablet will not wake back up
Problem 2: When disabling wifi the tablet will freeze requiring a reboot
Problem 3: When moving from one access point to another on the same network, the wifi will stop working and requires a reboot.
Had this issue on this kernel and on the latest harmony for ICS.
Hi! This is the Acura Kernel for CyanogenMod or CyanogenMod Mod as Lewa Rom.
For me is the best kernel for Cyanogenmod, have a lot of features of the the great chef ACURA, from htcspain.
FEATURES:
- Updated all the kernel libraries.
- Oc to 1,300
- New frequencies added
- New Voltage
- Undervolt
- Minimum Frequency 100
- Frequency Series Max 1.3 GHz
- Ram at 450 MHz
- Bluetooth Settings
- Default Dealine
- Everything native EXT4
- Baseband Libraries Update
- Local Settings AND MORE ...
DOWNLOAD:
http://content.wuala.com/contents/infernum/Kernels/Kernel(AcuraTeam-LeWa).zip
HOW TO FLASH:
BEFORE FLASHING!: backing up of your applications and others with some program.
Log in recovery and make data / factory reset
wipe cache
Dalvik wipe
Now flash the kernel.
And does the super user
now restore applications and other
Original thread: http://www.htcspain.com/roms-lg-optimus-3d-384/acurateam-lewa-v1-espanol-53623/
Does this have 3D / HDMI? ( I hope so, as CMs do not have the 3D / HDMI features)
schubeir
the answer is no!!!! just realised that from the original spanish post.
schubeir said:
Does this have 3D / HDMI? ( I hope so, as CMs do not have the 3D / HDMI features)
schubeir
the answer is no!!!! just realised that from the original spanish post.
Click to expand...
Click to collapse
Just so you know, kernels don't control 3D.
HDMI to an extent only.
screenshots? and since this being a cyanogen type rom dare I ask about the wifi? is it stable?
sketch2k278, this is the kernel ONLY, so you cant really show screenshots, thats more for roms.
I have pandaballs CM 7.2+ U jelly v1.6 but when I put your kernel I lost root,and I cant install su again.
Sent from my LG-P920
roxito said:
I have pandaballs CM 7.2+ U jelly v1.6 but when I put your kernel I lost root,and I cant install su again.
Sent from my LG-P920
Click to expand...
Click to collapse
:S
It's true...
I don't know why...
I want to meet the person who packaged this kernel and slap him.
Try the package attached. Not sure if it will work, just quickly fixed the cwm zip to remove unnecessary flashing steps.
No idea how/why this breaks root. Nothing I saw can break root, unless it's kernel related (very unlikely).
No it doesnt work .no root.never mind i will stay as it is.
Sent from my LG-P920
How does it break root? su missing? Busybox missing? Superuser.apk missing?
pandaball said:
How does it break root? su missing? Busybox missing? Superuser.apk missing?
Click to expand...
Click to collapse
SU is missing.I open supersu and it says no su found.I unistall supersu and install it again but its the same.I made a folder with system/bin inside the zip with the kernel but nothing.
Bluetooth problems. Not turn on bluetooth. Very fast and fluid. Great job.
Tested with cm-7-20120729-NIGHTLY-p920 and cm-7-stable.
I asked the creator, to see what he says ...
Download the su flashable from here and flash it, see if it works: http://downloads.noshufou.netdna-cdn.com/superuser/Superuser-3.1.3-arm-signed.zip
insestito said:
Hi! This is the Acura Kernel for CyanogenMod or CyanogenMod Mod as Lewa Rom.
For me is the best kernel for Cyanogenmod, have a lot of features of the the great chef ACURA, from htcspain.
FEATURES:
- Updated all the kernel libraries.
- Oc to 1,300
- New frequencies added
- New Voltage
- Undervolt
- Minimum Frequency 100
- Frequency Series Max 1.3 GHz
- Ram at 450 MHz
- Bluetooth Settings
- Default Dealine
- Everything native EXT4
- Baseband Libraries Update
- Local Settings AND MORE ...
DOWNLOAD:
http://content.wuala.com/contents/infernum/Kernels/Kernel(AcuraTeam-LeWa).zip
HOW TO FLASH:
Flash like any other kernel, from Custom Recovery.
NOT DOWNLOAD!! SOME PEOPLE SAY THAT IF YOU INSTALL THIS KERNEL, YOU LOST SUPER USER.
Original thread: http://www.htcspain.com/roms-lg-optimus-3d-384/acurateam-lewa-v1-espanol-53623/
Click to expand...
Click to collapse
This is q beta kernel, is normal to fault...
No, I did that already it doesnt work.thanks anyway pandaball.I will wait for your next cm rom.
Sent from my LG-P920
The su binary doesn't flash properly?
In any case, I would advise people to stay away from this kernel given that it doesn't like root a lot.
pandaball said:
The su binary doesn't flash properly?
In any case, I would advise people to stay away from this kernel given that it doesn't like root a lot.
Click to expand...
Click to collapse
No it flashes ok but when I open superuser it says no su found.I go to system/ bin and its there.nevermind.hope for an update from your side for cm 7.2+ when you have time
Sent from my LG-P920
I know how you fix the problem of SU!
Look the first post
insestito said:
I know how you fix the problem of SU!
Look the first post
Click to expand...
Click to collapse
now work...i just install it. is the first time i install cm
I'm on SlimKat build 3 and I can't make work BLN/BLD on default kernel, even I activated from advanced option and I tried NStools.
The only way is by installing devil kernel+nstools, and BLN is working only on calls.
Can anyone fix this?
slik2 said:
I'm on SlimKat build 3 and I can't make work BLN/BLD on default kernel, even I activated from advanced option and I tried NStools.
The only way is by installing devil kernel+nstools, and BLN is working only on calls.
Can anyone fix this?
Click to expand...
Click to collapse
+1, i'd like it too!
slik2 said:
I'm on SlimKat build 3 and I can't make work BLN/BLD on default kernel, even I activated from advanced option and I tried NStools.
The only way is by installing devil kernel+nstools, and BLN is working only on calls.
Can anyone fix this?
Click to expand...
Click to collapse
I can`t confirm. Im running Stable (Version 3), too. Works like a charm for me for calls, whatsapp ....
I`m using BLN Control free from PlayStore. Try this....
Did you go to "Settings" -> "Advanced Options" -> "Device"? There`s a Notification Light Option as well...
richyg83 said:
Try this.....
Click to expand...
Click to collapse
don't quote without read first
yes, i tried that. default kernel + nstools/bln control free from market is not light'up my keys at all. devil kernel+nstools works only on cals, every other notifications - not.
i'm on slimkat v3, clean install (wipe all - system/data/cache)
slik2 said:
don't quote without read first
yes, i tried that. default kernel + nstools/bln control free from market is not light'up my keys at all. devil kernel+nstools works only on cals, every other notifications - not.
i'm on slimkat v3, clean install (wipe all - system/data/cache)
Click to expand...
Click to collapse
Wow....I hope you DO know, that People try to help....So do I! You did NOT say you tried BLN Control free, just NSTools....
Found this fix on SlimKat thread: BLN Fix for RC2. It's for RC2 but still worth a shot. Report the bug on SlimKat thread or in SlimCenter to help the devs.
ej8989 said:
Found this fix on SlimKat thread: BLN Fix for RC2. It's for RC2 but still worth a shot. Report the bug on SlimKat thread or in SlimCenter to help the devs.
Click to expand...
Click to collapse
BLN Fix for RC2 is not working on V3. I have same behavior width devil kernel, works only on calls.
I do not have permission to post on SlimKat thread.
On build 3.2 BLN is working width default kernel + NStools, but again only on calls.
No other complains about SlimKat
slik2 said:
On build 3.2 BLN is working width default kernel + NStools, but again only on calls.
No other complains about SlimKat
Click to expand...
Click to collapse
Can you tell me if there's also the option to enable BLD?
It's almost the only thing i miss from my previous ROM...
BLD is not implemented (i think) in default kernel, in NStools is not showing any options for BLD, only for BLN.
slik2 said:
BLD is not implemented (i think) in default kernel, in NStools is not showing any options for BLD, only for BLN.
Click to expand...
Click to collapse
Thank you!! so it's kernel related...
it's a pity cause it's the only feature i miss and i'm satisfied with the default kernel, i wouldn't like to change it just for one thing
I ported Sweep2Wake and DoubleTap2Wake features to CM11 kernel.
(S2W/DT2W kernel for Sense rom is here: http://forum.xda-developers.com/showthread.php?p=52678000)
Features:
- Sweep2Wake
Sweep2wake (S2W) allows you to wake up your device by swiping your finger across the capacitive buttons from left to right.
Swiping from right to left will put it back to sleep (sweep2sleep).
/sys/android_touch/sweep2wake
0=disabled
1=enable sweep2wake and sweep2sleep (default)
2=enable sweep2sleep only
- DoubleTap2Wake
DoubleTap2Wake (DT2W) allows you to wake the device by double tapping the screen.
/sys/android_touch/doubletap2wake
0=disabled
1=enable doubletap2wake (default)
Credits and Thanks:
All credits and thanks go to the original authors: CyanogenMod team and @flar2.
Disclaimer:
I am not responsible if you "brick" your device or in anyway damage it or void your warranty.
Proceed at your own risk.
Installation:
1. Install CM11.
2. Flash the attached boot-m4-cm11-s2w-2014mmdd.img which supports both old and new partition layouts.
# fastboot flash boot boot-m4-cm11-s2w-2014mmdd.img
Source:
The attached kernel_htc_msm8960-2014mmdd.patch is a patch to the CM11 source.
Enjoy!
Build Date: 2014-11-30
Created 2014-04-27
Last Updated 2014-11-30
Many thanks for your support of our One mini's. Would this work on other builds of CM11 like the SlimKat port that has just surfaced, or is this just for standalone CM11?
Sent from my GT-I9000 using Xparent Green Tapatalk 2
thanks! S2W and T2W are working just fine! but the cpu governor is stuck at performance, you can't change it.
Can you port your kernel to our sense 6 port ROM?
It would be awesome
Is this kernel are compatible with stock 4.4.2 ROM? If not, is possible to port it?
Im a big sense fan on 5.5....but these features along is really making me want to switch to c,11
another problem: I can't install any App. via play store and apks. "invalid file package" or something similar.
changed back to another kernel and everything was working. back to this and problem was back.
I also wiped play store cache & data - not helping.
RuffBuster said:
Many thanks for your support of our One mini's. Would this work on other builds of CM11 like the SlimKat port that has just surfaced, or is this just for standalone CM11?
Click to expand...
Click to collapse
MirageBlader said:
Can you port your kernel to our sense 6 port ROM?
It would be awesome
Click to expand...
Click to collapse
IncubusUA said:
Is this kernel are compatible with stock 4.4.2 ROM? If not, is possible to port it?
Click to expand...
Click to collapse
This kernel is just for standalone CM11 and is not compatible with stock 4.4.2 ROM. Sorry.
I have no plan to port S2W/DT2W to the stock 4.4.2 kernel. My patch will be helpful for porting.
By the way, stock Sense 6.0 will have Motion Launch gestures that support S2W/DT2W.
theodorius123 said:
thanks! S2W and T2W are working just fine! but the cpu governor is stuck at performance, you can't change it.
Click to expand...
Click to collapse
theodorius123 said:
another problem: I can't install any App. via play store and apks. "invalid file package" or something similar.
changed back to another kernel and everything was working. back to this and problem was back.
I also wiped play store cache & data - not helping.
Click to expand...
Click to collapse
I am using 0424 nightly with my kernel and there is no problem.
Please update to the latest nightly and retry.
I was using the same nightly.
maybe it's caused by flashify. just started to use this a week ago. will test with normal fastboot flashing when back home from work. I should really install ADB in our office
EDIT: the governor problem was only with CM internal settings. kernel tuner was able to change the gov.
theodorius123 said:
maybe it's caused by flashify.
Click to expand...
Click to collapse
yes, it was flashify! everything is working fine now after flashing via fastboot.
Do these features affect battery life somehow?
morschesholz said:
Do these features affect battery life somehow?
Click to expand...
Click to collapse
There seems to be no major negative impact on battery life.
Sync and build with the latest kernel source (2014-05-01). See the opening message.
Sync and build with the latest kernel source (2014-05-05). See the opening message.
kyasu said:
Sync and build with the latest kernel source (2014-05-05). See the opening message.
Click to expand...
Click to collapse
thanks! kernel works great so far. will flash the new version later!
I can confirm that this kernel works flawlessly!!!
I wish I had the same kernel for STOCK SENSE-based ROM.
Many thanks to @kyasu.
Sync and build with the latest kernel source (2014-05-15).
Source (patch) is slightly modified for working with m4 and m7.
See the opening message.
Czechnolog said:
I can confirm that this kernel works flawlessly!!!
I wish I had the same kernel for STOCK SENSE-based ROM.
Many thanks to @kyasu.
Click to expand...
Click to collapse
I ported S2W/DT2W to sense kernel.
See: http://forum.xda-developers.com/showthread.php?p=52678000
@kyasu - thanks for this kernel. I have a question - did you also experience this?
a) When I drive and have Google Maps on, the phone is constantly discharging even if it is connected to my car charger. (app. minus 5 % in 30 minutes)
b) When I do the same, but I am on any SENSE-based ROM, the phone is charging. (app. plus 7% in 30 minutes.)
Do you have any ideas?
LUTHFY CUSTOM KERNEL FOR CM 12.1
I just wanna share my first compiled custom kernel for cm12.1 Hope you like it.
Changelogs:
Re-compiled with toolchains Sabermod 4.8
Added more CPU Governor: smartassv2, lagfree, intellidemand, ondemandplus, smartmax, wheatley, alucard, lionheart
Added more I/OScheduler : zen, tripndroid, sio, vr, fifo
Added Power Suspend Mode
Fix auto reboot after select simple_ondemand gpu governor
Enable LZ4 zRAM compression (makes scrolling more smooth)
Download link: https://www.dropbox.com/s/mdk4y85ucntd20c/luthfy-boot-cm12.1-nokiax2.zip?dl=0
How to install: flash with twrp
Credits and thanks to:
- @zombah
- @vm03
- @y-bee4pda
- sabermod dev
UPDATE
Luthfy Kernel V2
Changelogs:
- Recompiled with Uber toolchains 5.3
- Fix slowmotion issue (since this kernel compiled till I write this post I'm not facing slowmotion issue)
- Other tweaks
Download link: https://db.tt/bWdNaz9p
Sorry for my bad english, this is my first thread, hit thanks if this makes you feel good :laugh:
any one have tried?
Good
Can you port this to our devices? https://forums.oneplus.net/threads/efidroid-the-new-multi-boot-era.437080/
It is same as a kernel
symbuzzer said:
Can you port this to our devices? https://forums.oneplus.net/threads/efidroid-the-new-multi-boot-era.437080/
It is same as a kernel
Click to expand...
Click to collapse
I'm a newbie on building kernel sir, I can't do it
hachiman21 said:
I'm a newbie on building kernel sir, I can't do it
Click to expand...
Click to collapse
Great work...what name is app you used?
@hachiman21, can you please build one for CM11 and CM11-based ROMs like PACman. Thanks.
y-bee4pda said:
Great work...what name is app you used?
Click to expand...
Click to collapse
Did you mean app for changing cpu governor? I use kernel auditor, sir
rahimali said:
@hachiman21, can you please build one for CM11 and CM11-based ROMs like PACman. Thanks.
Click to expand...
Click to collapse
hmm i'm was bored with cm11
hachiman21 said:
hmm i'm was bored with cm11
Click to expand...
Click to collapse
But still, it would be nice to have the same choices on CM11 as are now available on CM12.1 thanks to your kernel... :thumbup:
WiFi crashed!
Wifi won't turn on after I flashed it..(Cm12.1 Build 2) :crying: any solutions? (solved by flashing boot.img from build2)
thanks, need edit boot.img to disable internal memory.
what best config using this kernel for our device
StefyRox said:
Wifi won't turn on after I flashed it..(Cm12.1 Build 2) :crying: any solutions?
Click to expand...
Click to collapse
Oh sorry this kernel for latest version of cm12.1, build 5. Solutions:
1. Extract file boot.img from cm12.1 build 2 zip file
2. Extract folder meta-inf from my kernel zip file
3. Compress that boot.img and meta-inf folder to zip
4. Flash that compressed file with twrp
is it ok if i edit the boot.img and put an edited framwork in your zip to disable internal memory (for personal use) ????
souhail sboui said:
is it ok if i edit the boot.img and put an edited framwork in your zip to disable internal memory (for personal use) ????
Click to expand...
Click to collapse
It will be good if you share it in here too
hachiman21 said:
It will be good if you share it in here too
Click to expand...
Click to collapse
i am new here so i HOPE it will greatly work
there u go : https://drive.google.com/file/d/0B88-JzkMpzHRcG5oWUwxRmNuS1E/view?usp=drivesdk
Awesome work.....thanks for bulding the kernel now working smooth cm12.1 but need more improvements...... @hachiman21
Pawan987 said:
Awesome work.....thanks for bulding the kernel now working smooth cm12.1 but need more improvements...... @hachiman21
Click to expand...
Click to collapse
@pawan, hai I am now using cm 11. how to install this ? after I flash cm12.1 build 5 want to install this kernel. How it is slowdown ui fixed ?
dinesh1014 said:
@pawan, hai I am now using cm 11. how to install this ? after I flash cm12.1 build 5 want to install this kernel. How it is slowdown ui fixed ?
Click to expand...
Click to collapse
Flash cm12.1 then flash this kernel from twrp......this kernel can make your rom smooth........ slowdown still a bug for us
hachiman21 said:
Oh sorry this kernel for latest version of cm12.1, build 5. Solutions:
1. Extract file boot.img from cm12.1 build 2 zip file
2. Extract folder meta-inf from my kernel zip file
3. Compress that boot.img and meta-inf folder to zip
4. Flash that compressed file with twrp
Click to expand...
Click to collapse
Thanks @hachiman21 I'll try it :highfive::fingers-crossed: