Database Info

[Governor] boostedASSv2 for your MS2 (20.02.2014: added files for czechop's build)

Disclaimer:
I'm not responsible for any damage of your device that may occur.
Prerequisites:
It's tested with tezet's builds and should also work with stock kernel. If not, please notify me and I will upload other versions.
For czechop's builds I added special files because the build uses a different kernel than tezet's. You do not break something if you install the wrong version, it just won't work.
You need CWM or TWRP of course...
Difference between the zip-files:
...active.zip: ...activates the governor on every boot.
...inactive.zip: ...installs the governor but you must choose it in settings.
You can (de-)activate the governor on boot by installing the corresponding version.
Information for users:
Boot to CWM/TWRP and flash the zip, that's it.
Information for devs:
You can pass parameter to the module. Read 99boostedASS. The values are sorted alphabetically:
Code:
awake_ideal_freq
down_rate_us
max_cpu_load
min_cpu_load
ramp_down_step
ramp_up_step
sample_rate_jiffies
sleep_ideal_freq
sleep_wakeup_freq
up_rate_us
If you want to change values, change them in 99boostedASS. If you want to use standard values of boostedASSv2 just leave the parameters away oder change the ones you want to be standard to negative values.
Credits:
Thanks to BMc08GT for source code of boostedASSv2
Thanks to ->--- for optimized values for the MS2

Thanks.. works fine..
Milestone_User / MS_User
Sent from my A953 using xda app-developers app

I had the Data-problem really heavy, so i will test, if this is the solution. Installed it a few minutes ago. will report in a few days my experience.

MS_User said:
Thanks.. works fine..
Milestone_User / MS_User
Sent from my A953 using xda app-developers app
Click to expand...
Click to collapse
Nice to see you!
carpet55 said:
I had the Data-problem really heavy, so i will test, if this is the solution. Installed it a few minutes ago. will report in a few days my experience.
Click to expand...
Click to collapse
If this governor really fixes problems with data connections with other governors, that would be great! Looking forward to hearing some positive reactions.

carpet55 said:
I had the Data-problem really heavy, so i will test, if this is the solution. Installed it a few minutes ago. will report in a few days my experience.
Click to expand...
Click to collapse
Me too..

SmartassV2
Any chance you do the same for SmartassV2? Would really appreciate it

Thanks for your work..
Which differences are about these ones? http://forum.xda-developers.com/showthread.php?t=1655480
Sorry for my English

JoseBerga said:
Thanks for your work..
Which differences are about these ones? http://forum.xda-developers.com/showthread.php?t=1655480
Sorry for my English
Click to expand...
Click to collapse
These don't work anymore due to 2nd-boot. You'll get bootloops, at least that is what I get and others.

Does it works on Danik's Ms2ginger version?
Thats my favorite rom.
Enviado de meu A953 usando o Tapatalk 2

Now i used it one day, and i never had data problems! Before this app my internet was not usable...
So, this app solved my connections problems! Thanks for Woody and the developers!

Alchedin said:
Any chance you do the same for SmartassV2? Would really appreciate it
Click to expand...
Click to collapse
boostedASSv2 is a modified smartASSv2 so I think it is not worth investigating in smartASSv2. If you can name good arguments for smartASSv2 I might look at it.
morcego.surf said:
Does it works on Danik's Ms2ginger version?
Thats my favorite rom.
Enviado de meu A953 usando o Tapatalk 2
Click to expand...
Click to collapse
Open "Settings/Phone Info". If it shows that you are using kernel 2.6.32.9 it should work. I would recommend an backup though. If it does not work please tell me which kernel you are using and I will upload a version for you.
carpet55 said:
Now i used it one day, and i never had data problems! Before this app my internet was not usable...
So, this app solved my connections problems! Thanks for Woody and the developers!
Click to expand...
Click to collapse
Great to hear! Besides, it is not an app, it is a governor...

blu2lz said:
boostedASSv2 is a modified smartASSv2 so I think it is not worth investigating in smartASSv2. If you can name good arguments for smartASSv2 I might look at it.
Click to expand...
Click to collapse
Well since you modified the BoostedAssV2 i was hoping you could tell me :silly:
But I searched about the differences between them and it seems you are right, there aren't any major differences between BoostedAss and SmartAss. Even seems boostedassv2 is more power efficient.
I used these links as reference:
link
and
link

@carpet55
You're welcome!
Here another note using boostedASSv2.
In the last days i got some randomly/variouse FCs without any clue what happens. Now i think i found it.
Before boostedASSv2 and the first days with, i used an "easy" lifewallpaper and sometimes, when the M2 wakes up from deepsleep it behaves strange.
After changing to a static wallpaper this is gone .
_WOODY_

Hi! i´m tryng to include the boostedASSv2 in a zip, a tezet´s cm10 nightly, but i´m a little lost. I´ve downloaded the zip file (the "active" one) finding 3 files inside. using the notepad++ found in the 99boostedASS that i should place the files symsearch.ko in /system/lib/modules/ and so the file cpufreq_boostedASS2.ko but there are some values at the end of the line that i dont´t know where and how they should be placed (i think in the cpufreq file , but...) And finaly, the last line, what does it means? Hope anybody can help me, and sorry for my english!

Thank for your work.
Dying to squeeze some more from the M2...

ramelco said:
Hi! i´m tryng to include the boostedASSv2 in a zip, a tezet´s cm10 nightly, but i´m a little lost. I´ve downloaded the zip file (the "active" one) finding 3 files inside. using the notepad++ found in the 99boostedASS that i should place the files symsearch.ko in /system/lib/modules/ and so the file cpufreq_boostedASS2.ko but there are some values at the end of the line that i dont´t know where and how they should be placed (i think in the cpufreq file , but...) And finaly, the last line, what does it means? Hope anybody can help me, and sorry for my english!
Click to expand...
Click to collapse
Read the information for devs in my first post. I explained the values there.
99boostedASS must be moved to /system/etc/init.d/.
Read the updater-script for further information on where to put files.

Now also available for czechop builds!
I just added files for czechop's builds. He uses a different kernel, so the old files are not working. It is tested with the most recent build of CM11, notify me if there are any problems.

Can't we use that governor on other devices?

It's not the first time I overclock one of my phones, but I'm stuck here. I'm on CM11 by czechop and flashed boostedASSv2_for_MS2_czechop_active.zip. Installed SetCPU, but can't choose more than 1000 MHz. I installed Aero Control, at least it shows I have boostedASSv2 installed. But can't change the MHz. Also tried Milestone Overclock, works temporarily (I know it says only for Stock ROM) and can see that change in the CM11 developer settings, but after a reboot, all is gone.
I went to the boot menu where I can change CLK 1 to 4. Changed 4 from 1000 to 1300 MHz but phone gets stuck during boot.
I know I'm doing something wrong . How can I get the boostedASS to work / run the phone with 1300 MHz (or less)? Thanks in advance.

[KERNEL][CM10.1][PA3+][Ubuntu 12.10] rtfpessoa [27/03]

*** DON'T FLASH THIS IF YOU ARE NOT COMFORTABLE WITH ANY PROBLEM IT MAY CAUSE ***
Goal:
This kernel is not intended to compete in any way with others. This kernel is a hobby that i'm in with the goal to provide two flavors of @rabits dualboot kernel,
one with pure CyanogenMod kernel and other with some tweaks. I'm not expert neither so this maibe dangerous stuff. Pay atention before continue. I'm making this
public because i think this can be usefull for others.
*** Backup your data before continuing! ***
Info:
This is a complementary project that uses @rabits work for TF700T Dualboot.
Here you can only get the Kernel and the installation zip, but you need to get the RooFS from @rabits work,
to get the complete funcionality. The link to the RootFS is provided here too near the below zips.
Changelog:
16/03
Android is the default boot option
CPU-GPU OC & UV, Governors Lagfree, Lulzactive, Pegasuq, IO Schedulers VR and SIO (thanks to Hundsbuah) [PATCH]
17/03
Lots of updates from franciscofranco [PATCH]
Interactive Governor Tweaks (bryce09)
24/03
Some ROW tweaks (thanks to Hundsbuah)
OC Optimizations (thanks to Hundsbuah)
26/03
Update installer(thanks to rabits)
27/03
Added a version without dualboot
Installation:
THIS KERNEL IS FOR AOSP ROMS ONLY
If you already have the dualboot setup you just need to flash the kernel.
If you don't have the dualboot setup yet you need to use the linux installer.
Downloads [DUALBOOT]:
RootFS
Download​
Ubuntu & rtfpessoa Kernel [26/3]
Download​
rtfpessoa Kernel [26/3]
Download​
Ubuntu & CM stock kernel [26/3]
Download​
CM stock kernel [26/3]
Download​
Downloads [CyanogenMOD / ParanoidAndroid]:
rtfpessoa Kernel [27/03]
Download​
Source(s):
https://github.com/rtfpessoa/android_kernel_asus_tf700t/tree/cm101-rtfpessoa
https://github.com/rtfpessoa/android_kernel_asus_tf700t/tree/stock-cm
https://github.com/rtfpessoa/android_kernel_asus_tf700t/tree/rtfpessoa-nodualboot
Donate:
If you enjoyed my work please donate, if you can't donate just press the thanks button
Thanks:
@rabits - TF700T Dualboot creator
@franciscofranco - Some help and a lot of patches
@Hundsbuah - Overclock and a lot other awesome improvements
@bryce09 - Some inspiration and help
@dasunsrule32 - TF700T Cyanogenmod maintainer

Good work. An info: is it possible to share a video during the bootstrap so i view the dualboot ?
Thanks a lot
Maframan

maframan said:
Good work. An info: is it possible to share a video during the bootstrap so i view the dualboot ?
Thanks a lot
Maframan
Click to expand...
Click to collapse
For related dualboot stuff check @rabits thread: http://forum.xda-developers.com/showthread.php?t=2014759
Here i just change the kernel the rest is his work. There you have a video with the boot.

Hi, I have just tried your new kernel with oc and everything worked just fine untill when in Ubuntu I tried to do a restart which resulted in Ubuntu shuting down for the restart and nothing else, so after 2mins I held the start button down for 15 secs when my tablet restarted again.
Thanks for all your hard work.

maxal said:
Hi, I have just tried your new kernel with oc and everything worked just fine untill when in Ubuntu I tried to do a restart which resulted in Ubuntu shuting down for the restart and nothing else, so after 2mins I held the start button down for 15 secs when my tablet restarted again.
Thanks for all your hard work.
Click to expand...
Click to collapse
I'm still figuring out why sometimes ubuntu take a lot to shutdown.
Sometimes it may take 5 minutes. Stays in a black screen for that time.

rtfpessoa Kernel Update:
17/03
Lots of updates from franciscofranco [PATCH]
Interactive Governor Tweaks (bryce09)

Hi mate, thanks for the new dualboot kernel, I have just tested it and all works good, ref the problem I had earlier with the restart taking an age, it now reboots in less than 2 mins.
Thanks :good:

Paranoid Android
Does this kernel work with Paranoid Android ROM? And if it does, which version - CM or stock?

snakerock said:
Does this kernel work with Paranoid Android ROM? And if it does, which version - CM or stock?
Click to expand...
Click to collapse
I did not tested it but it should work with any AOSP rom.
Both of them, one is a clean CM version the other has some tweaks.
I did not understand if you read that this is not simply a kernel. This is a kernel with dualboot, just for you dont get any problem flashing it without understand.

UPDATED DIRECTORY TREE, FILES MAY TAKE SOME TIME TO UPDATE
rtfpessoa Kernel Update:
24/03
Some ROW tweaks (thanks to Hundsbuah)
OC Optimizations (thanks to Hundsbuah)

Is there anybody, that reads this thread, that want a flashable from my tweaked kernel version without dualboot, just for CM or PA?

rtfpessoa said:
Is there anybody, that reads this thread, that want a flashable from my tweaked kernel version without dualboot, just for CM or PA?
Click to expand...
Click to collapse
Yes please

maxal said:
Yes please
Click to expand...
Click to collapse
I'm currently working on the next normal version based on rabits latest work and after that i will try to do this.

rtfpessoa said:
I'm currently working on the next normal version based on rabits latest work and after that i will try to do this.
Click to expand...
Click to collapse
Thanks mate :good:

UPDATED DIRECTORY TREE, FILES MAY TAKE SOME TIME TO UPDATE
Update:
26/03
Update installer(thanks to rabits)

Re: [KERNEL][CM10.1 & Ubuntu 12.10] rtfpessoa [26/03]
rtfpessoa said:
Update:
26/03
Update installer(thanks to rabits)
Downloads:
Ubuntu & rtfpessoa Kernel [26/3]
Download​
rtfpessoa Kernel [26/3]
Download​
Ubuntu & CM stock kernel [26/3]
Download​
CM stock kernel [26/3]
Download​
Click to expand...
Click to collapse
Usable in PA yet?
Sent from xda app-developers app

gvsukids said:
Usable in PA yet?
Sent from xda app-developers app
Click to expand...
Click to collapse
As i said before i did not tested but since it works on CM it is likely to work on PA. Just give it a try and report here its no big deal. Just have a rom to flash if there is a problem. You wont loose recovery, so you can always go back so the old kernel.

Re: [KERNEL][CM10.1 & Ubuntu 12.10] rtfpessoa [26/03]
rtfpessoa said:
As i said before i did not tested but since it works on CM it is likely to work on PA. Just give it a try and report here its no big deal. Just have a rom to flash if there is a problem. You wont loose recovery, so you can always go back so the old kernel.
Click to expand...
Click to collapse
Thanks, but file is not found
Sent from my Transformer Infinity using xda app-developers app

gvsukids said:
Thanks, but file is not found
Sent from my Transformer Infinity using xda app-developers app
Click to expand...
Click to collapse
Just wait a little bit and use the links in the first post.
I re-arranged the folder tree to be more explicit
EDIT: I think now all the links are fine.

Downloads [JUST CyanogenMOD]:
rtfpessoa Kernel [27/03]
Download​

Galaxy Y Stock Kernel compiled from source

Hello Guys, I would like to present you my first SGY kernel which I have compiled from source. This is only for Stock or Stock based ROMs.
Features :
1) Loads of governors like userspace,ondemand,powerspace,conservative etc. so that users will not get biased towards only one configuration
2) I/O schedulers like noop and cfq with cfq as a default scheduler
3) Max frquency 832 Mhz and min frequency 312 which I found the best in terms of battery and performance because Overclocking decreases the life of Phone.
I am currently lookoing forward to add Extra I/O Schedulers although cfq is best out there with Conservative governors in my opinion. CPU underclocking will be in my roadmap as well. I hope you guys will appreciate me.
Steps for Installing/Flashing :
1) First reboot into recovery and flash any CWM recovery(Note: don't flash it through stock recovery directly)
2) Go to mounts/Storage and mount everything system,cache,sd-card
3) Now flash the Zip I have provided
4) Now Wipe cache partition from Main menu
5) from Advanced option-> wipe dalvik cache and reboot
I have tested it myself.Please report in case you guys run into any issues.
Credits :
To me Of course
@google
@samsung for providing kernel source
GitHub :
https://github.com/lokesh3440/Galaxy_Y_Stock_Kernel
Kernel Sources :
https://github.com/lokesh3440/Galaxy_Y_Kernel_Source
Changelog:
V2 Build execution is in Progress.......I just checked. V1 works pretty well with Hyperion V9.
Initial Build
Here are few Screenshots :
Don't forget to submit logcats in case you run into any issues.

Testing now...
Sent from my GT-S5360 using Tapatalk 2

İ will test it
Sent from my GT-S5360 using xda app-developers app

Initial impressions
1)Performance seems decent.
2)No support for amarulzz a2sd
3)No CWM integrated
4)Deepsleep not working.
Cant talk about battery so soon.
Sent from my GT-S5360 using Tapatalk 2

Souroking said:
Initial impressions
1)Performance seems decent.
2)No support for amarulzz a2sd
3)No CWM integrated
4)Deepsleep not working.
Cant talk about battery so soon.
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
I will add amarullz a2Sd support and integrated CWM recovery very soon. I still need to check why deep sleep isn't working. Thanks for feedback.

lokesh.3440 said:
I will add amarullz a2Sd support and integrated CWM recovery very soon. I still need to check why deep sleep isn't working. Thanks for feedback.
Click to expand...
Click to collapse
İ'm waiting for CWM
Sent from my GT-S5360 using xda app-developers app

Hello,
According to XDA Rule on GPL and Apache Compilence
For kernel developers: You must provide FULL source code, not just the edits you made (reference here). Your source code must also be up-to-date with any binary releases. If in doubt, update your github first, then release the binary, NOT the other way round.
Click to expand...
Click to collapse
the stuff you have provided on your github is only the kernel.
You have to upload the whole source code you've used while compiling this kernel.Do it ASAP if you didnt knew it.Or your thread will be closed soon.
Take this as a suggestion :good:
Regards.

DC07 said:
Hello,
According to XDA Rule on GPL and Apache Compilence
the stuff you have provided on your github is only the kernel.
You have to upload the whole source code you've used while compiling this kernel.Do it ASAP if you didnt knew it.Or your thread will be closed soon.
Take this as a suggestion :good:
Regards.
Click to expand...
Click to collapse
Thanks for your suggestion brother. This is my first contribution,that's why i wasn't aware of it. Do you mean the Samsung open source update which i have used to compile it ?
can you guide me how exactly i need to update it ?

deep sleep is present in stock kernel too.
only states files is not enabled/present.
if cpu spy is displaying freq. usage and deepsleep is notshowing up then there is some problem.
else by default its enabled in stock kernel.

Nitzz said:
deep sleep is present in stock kernel too.
only states files is not enabled/present.
if cpu spy is displaying freq. usage and deepsleep is notshowing up then there is some problem.
else by default its enabled in stock kernel.
Click to expand...
Click to collapse
But CPU spy says "kernel is not compatible".......

lokesh.3440 said:
Thanks for your suggestion brother. This is my first contribution,that's why i wasn't aware of it. Do you mean the Samsung open source update which i have used to compile it ?
can you guide me how exactly i need to update it ?
Click to expand...
Click to collapse
in simple words,upload your whole directory i.e common and modules of your modified samsungopensource folder :good:

DC07 said:
in simple words,upload your whole directory i.e common and modules of your modified samsungopensource folder :good:
Click to expand...
Click to collapse
Thanks, I will upload it on my github in the evening.

Well anybody tried compiling the kernel on Ubuntu 14.04? Gonna try it today! xD

lokesh.3440 said:
But CPU spy says "kernel is not compatible".......
Click to expand...
Click to collapse
check again.
its says- states file not found.
kernel is not compatible with that app cz freq. states file is disabled by default.
but deepsleep is enabled in kernel.
also the kernel u build is having old source.
latest kernel from samsung in update like dxmj is best n having many changes.
just add init.d support in it and compare the battry life with ur kernel.
and that stock one is far more stable than urs.
no offense
but untill and unless u add some more features in it, stock kernel will still be my preferred choice.
add more featrs into it to make it better than stock one.

aniket.lamba said:
Well anybody tried compiling the kernel on Ubuntu 14.04? Gonna try it today! xD
Click to expand...
Click to collapse
I have built it on ubuntu 14 only
Sent from my GT-I9505 using Tapatalk

lokesh.3440 said:
I have built it on ubuntu 14 only
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
You serious?
That's good.Gonna try soon!

Good one... :good:
the problem is it seems to have update2 source.... :-/
can run newer firmwares (ddmd,dxmj, etc).
Looking forward to this one. Please use update3 in the next one. Best of luck
P.S. As @Nitzz Said, Deep sleep is pre-included. if u have used the defconfig command, it is included in the kernel. try adding cpu_stats file...

Nachiket.Namjoshi said:
Good one... :good:
the problem is it seems to have update2 source.... :-/
can run newer firmwares (ddmd,dxmj, etc).
Looking forward to this one. Please use update3 in the next one. Best of luck
P.S. As @Nitzz Said, Deep sleep is pre-included. if u have used the defconfig command, it is included in the kernel. try adding cpu_stats file...
Click to expand...
Click to collapse
@nachiket,,,I have used Update 3 only,,,,but i forgot to add cpu stats file i guess.......It will be included in the next build. Thanks for your suggestion

lokesh.3440 said:
@nachiket,,,I have used Update 3 only,,,,but i forgot to add cpu stats file i guess.......It will be included in the next build. Thanks for your suggestion
Click to expand...
Click to collapse
see..
told ya.
u can ask anyone of us(senior membrs of sgy section) or anyother kernel dev for help or any doubt if u want.

[Q] WIFI not working after flashing custom kernel in CM 11

I have tried flashing 2 kernels-
1. Render Kernel AOSP
2. Pink Kernel
After flashing the 1st kernel the phone was stuck at bootlogo.When I flashed the 2nd kernel the phone was working fine but when i turned on the wifi the toggle switch remained greyed out and was not sliding back to off position.I tried rebooting my phone,clearing the cache but nothing worked.Other features in the phone are working properly.
Please help.Thanks in advance.

dhananjay123 said:
I have tried flashing 2 kernels-
1. Render Kernel AOSP
2. Pink Kernel
After flashing the 1st kernel the phone was stuck at bootlogo.When I flashed the 2nd kernel the phone was working fine but when i turned on the wifi the toggle switch remained greyed out and was not sliding back to off position.I tried rebooting my phone,clearing the cache but nothing worked.Other features in the phone are working properly.
Please help.Thanks in advance.
Click to expand...
Click to collapse
I also have the same issues.
But the Linaro kernel forum.xda-developers.com/moto-g/orig-development/kernel-falcon-t2868126 works fine.

This issue is related to Kernel modules. That is why flashing a certain kernel can fix it.

Meuuks13 said:
I also have the same issues.
But the Linaro kernel forum.xda-developers.com/moto-g/orig-development/kernel-falcon-t2868126 works fine.
Click to expand...
Click to collapse
Can you suggest more kernels which work properly in moto g XT1033?

dhananjay123 said:
Can you suggest more kernels which work properly in moto g XT1033?
Click to expand...
Click to collapse
Both of them weren't updated for a longer period. All other should work. Like the green machine or xperience.

k-kuchen said:
Both of them weren't updated for a longer period. All other should work. Like the green machine or xperience.
Click to expand...
Click to collapse
The Insanity (linaro) kernel is updated frequently. Only the OP subject is not updated
You could try 1.7 or 1.8. Dont use 1.9

k-kuchen said:
Both of them weren't updated for a longer period. All other should work. Like the green machine or xperience.
Click to expand...
Click to collapse
Insanity is ipdatesd well, see the github.
I also flashed the green machine on my xt1033 , wifi doesn't work.
Experience causes lags!

justanicename said:
The Insanity (linaro) kernel is updated frequently. Only the OP subject is not updated
You could try 1.7 or 1.8. Dont use 1.9
Click to expand...
Click to collapse
Why I should not use 1.9 ?

dhananjay123 said:
Why I should not use 1.9 ?
Click to expand...
Click to collapse
The developer said that there were some bugs. But try 1.7 or 1.8, they work really good. I prefer 1.7 for now because 1.8 causes somehow more battery drain.

justanicename said:
The developer said that there were some bugs. But try 1.7 or 1.8, they work really good. I prefer 1.7 for now because 1.8 causes somehow more battery drain.
Click to expand...
Click to collapse
Why has the developer removed all the downloads ? Only 2.0 is available for download ! Please can you attach the zip file of 1.7 and post it ?

dhananjay123 said:
Why has the developer removed all the downloads ? Only 2.0 is available for download ! Please can you attach the zip file of 1.7 and post it ?
Click to expand...
Click to collapse
Not sure why he did that..... And now v2.0 is gone, there is a new one with the date as version number. The development of this kernel fast. I havent tried the new one yet
But here is the file for v1.7 (the link will be removed after 21 days)
http://www.fileconvoy.com/dfl.php?id=g7e19482d343b612a9995569008d1b7c821a44f24b
I might move over to Xperience kernel, since the developer is more informative And i also have no problems with wifi with that one.

[KERNEL] [MTD] [TW/CM9/CM11] [DEV] Watson Kernel (MTD support on Gingerbread!)

Hello guys,
This is a project I was working on for a kernel for our SGY.
I made it with a few things in mind:
>Improve it's performance
>Be universally compatible (after I nearly given up on trying to get a snappier CM11 and after the need for a snappier SGY, I decided to go back to GB. However, BML is terrible, and it is annoying to come back to. I decided to build a MTD kernel for Gingerbread then, and it works!)
>Experiment and upgrade as much as I can (thanks @robcore!!!!)
But since I lost my device, I cannot continue developing it. I am then releasing the source code (sorry, no flashable stuff, I deleted it long ago ) for any of you to continue(?) my work if your heart so desires.
If I ever get myself another SGY (or another BCM21553 device), I will gladly continue development (and support whoever does it too), but before I lose all my data and the kernel code alongside it, I am making it available.
This kernel features:
-OC up to 1040MHz (It's questionable even today if the bcm21553 OCs really work, but I tried hacking a way that works very similarly to MarocOS's one, maybe even better. Be warned though, the source around it is messy)
-GPU hacks for performance (Again, even I don't know if they do work, probably the values are just there to be seen, I'm not sure. I do know though that increasing the CPU speed will much likely increase the speed of V3D too)
-DVFS disabled (I found out DVFS is mostly the culpirit in the "832MHz crisis" where the kernel would forcefully scale itself to 832MHz, so I eliminated any reference to it in kernel code. Apparently DVFS on the processor is only available under the bcm21553 governor, but it is present on the other drivers as well. The idea for disabling DVFS came from my friend @robcore)
-A few additional governors and a buggy interactive governor (which is the default xd)
-MTD support for Gingerbread (Thanks Samsung Epic 4G! Although it only works on TouchWiz (I tried it with SL v2 and v2.1 and it works, but under NougatME(CM7) I got no success and loads of segfaults), it works ALMOST perfectly. See bugs for details )
-Some scraped source code from Samsung's FSR I found on the internet (barely compilable, though)
Bugs:
>Gingerbread version:
-IMEI won't appear in the Status screen, I also faced problems with non-working radio for calls. Data works just fine, but calling and receiving calls is unavailable. I believe it is EFS-related. My suggestion is backing up the EFS partition's file structure, then converting it to MTD, then restoring the backup.
-TWRP will crash and panic when exiting, a workaround is force rebooting
>ICS version:
-TWRP will crash and panic when exiting (I believe fixing it here will fix the bug above too)
>KitKat version:
-Flashing images fail randomly, you may also be unable to reboot normally if you do so. I tried addressing this but I couldn't get anywhere.
DOWNLOAD THE SOURCE: Here!
Thanks to:
 @robcore - his development on the Snapdragon S4 breathes life on my dev soul!
 @zman0900 - I saw his thread on an MTD TW kernel for the Samsung Epic 4G, which led me to believe MTD on GB is possible.

nice kernel
It sound nice. I'm a newbie developer, I'm building a kernel to fix audio bug on cm9, hope it work. And thank you for the source

vdhero said:
It sound nice. I'm a newbie developer, I'm building a kernel to fix audio bug on cm9, hope it work. And thank you for the source
Click to expand...
Click to collapse
Have you gathered enough info on it? I would like to fix it too, but I couldn't get any info on whether if the audio bug is a kernel-side issue or an OS -side issue.
Best of luck for you

Building and fixing
sonickles9 said:
Have you gathered enough info on it? I would like to fix it too, but I couldn't get any info on whether if the audio bug is a kernel-side issue or an OS -side issue.
Best of luck for you
Click to expand...
Click to collapse
I don't sure so I decided to build a kernel from your source and another cm9 version from Mohamad.Afaneh's source and I'll merge the audio on both of them for the best think to fix the bug.Thank you .

Link for kernel?
(img files...)(stock/cm9/cm11)

TheRealModder said:
Link for kernel?
(img files...)(stock/cm9/cm11)
Click to expand...
Click to collapse
Compile one for yourself,man. It only takes like 15-25 mins

vdhero said:
Compile one for yourself,man. It only takes like 15-25 mins
Click to expand...
Click to collapse
I don't know how to compile....

TheRealModder said:
I don't know how to compile....
Click to expand...
Click to collapse
He wrote a script already, just add your toolchain and run the script. There's a guide in the readme

vdhero said:
He wrote a script already, just add your toolchain and run the script. There's a guide in the readme
Click to expand...
Click to collapse
Ok. The watson-kernel-bcm21553-src is used with other files?
Because i want to make cm9 mohhamad afaneh optimized version

TheRealModder said:
Ok. The watson-kernel-bcm21553-src is used with other files?
Because i want to make cm9 mohhamad afaneh optimized version
Click to expand...
Click to collapse
To make it, you have to sync the cm9 source code then add the files from his github to your localmanifest. This thing is not in anyway related to that except the MTD. This one is a kernel-compile only source

Oh man, i give up. I can't build a kernel from source, but i can modify a kernel.
Can someone give me the zimage for ics Please....
Sent from my Zenfone 2 Laser using XDA Labs

TheRealModder said:
Oh man, i give up. I can't build a kernel from source, but i can modify a kernel.
Can someone give me the zimage for ics Please....
Click to expand...
Click to collapse
zlimage? We don't have that here, we only have boot.img for kernel

vdhero said:
zlimage? We don't have that here, we only have boot.img for kernel
Click to expand...
Click to collapse
Or you can give me the extracted boot.img files. (ICS/KK)
I will rebuild it using dsixda's android kitchen.
Sent from my Zenfone 2 Laser using XDA Labs

TheRealModder said:
Or you can give me the extracted boot.img files. (ICS/KK)
I will rebuild it using dsixda's android kitchen.
Sent from my Zenfone 2 Laser using XDA Labs
Click to expand...
Click to collapse
Sorry but I can't because I'm bored of making ROMs so I switched back to Windows. I'm planning on making a ROM, I'll compile the kernel for you once I get linux installed

vdhero said:
Sorry but I can't because I'm bored of making ROMs so I switched back to Windows. I'm planning on making a ROM, I'll compile the kernel for you once I get linux installed
Click to expand...
Click to collapse
Ok. If you want to install linux i recommend using ubuntu or linux mint.
Ubuntu official website:https://www.ubuntu.com/
Linux mint official website:https://linuxmint.com/
Sent from my Zenfone 2 Laser using XDA Labs

VDHERO Please But a New Galaxy t Gt-S5360 and start the Development!
vdhero said:
To make it, you have to sync the cm9 source code then add the files from his github to your localmanifest. This thing is not in anyway related to that except the MTD. This one is a kernel-compile only source
Click to expand...
Click to collapse
VDHERO Please But a New Galaxy t Gt-S5360 and start the Development!

Assabtigle said:
VDHERO Please But a New Galaxy t Gt-S5360 and start the Development!
Click to expand...
Click to collapse
Sorry but I can't since my sgy is dead for a long time ago. I'll try to make one if I can find one. I've heard that there are some places that sell sgy for about 5 bucks, i'll find one ì possible

Be fast bro!!
vdhero said:
Sorry but I can't since my sgy is dead for a long time ago. I'll try to make one if I can find one. I've heard that there are some places that sell sgy for about 5 bucks, i'll find one ì possible
Click to expand...
Click to collapse
BE fast BRO Love U and Your WORK!!
All Your DEVELOPMENT are Faster than The ORIGINAL one Please Buy a NEW one!
and Yeah install the Stock Rom in your Phone by ODIN it will be fine!:laugh: