Related
I'm on CyanogenMod7-7.0.3-NS right now but want to go back to stock 2.3.4 as wavesecure is having issues with Cyanogen and can't verify my sim.
Baseband version: I9020XXKD1
Build Number:GRI40
Will this guide work for my Nexus S? http://forum.xda-developers.com/showthread.php?t=1061855
Sorry newbie here, just want to be really really sure as I followed a poor guide somewhere and got stuck up with the google logo and lock on boot, hence was forced to install cyanogen.
---
UPDATED: 7/8/11
Okay..so to close my question. I just followed this and everything went back to stock.
theunlockr.com/2011/01/20/how-to-unroot-the-nexus-s
1. followed the link above.
2. I remain rooted but recovery went back to stock. no more clockwork.
3. after booting, was alerted of a 2.3.4 update..so I updated again.
4. marketplace has been upgraded to the new interface (probably bec of the update)
5. to install screenshot app and fontchanger..I needed to have super user, so I just installed Clockwork (recovery-clockwork-3.0.2.4-) again and installed SU (su-2.3.6.1-ef-signed.zip) via SD card install.
6. so far, everything's good.
If you have some questions, feel free to ask.
Download a stock rom ( unless you made a nandroid backup)
Turn off you phone then start it while holding vol+
Do a factory reset, wipe cache and dalvik cache( found under advanved)
Flash your stock rom
Sent from my Nexus S using XDA App
Emhalwis said:
Download a stock rom ( unless you made a nandroid backup)
Turn off you phone then start it while holding vol+
Do a factory reset, wipe cache and dalvik cache( found under advanved)
Flash your stock rom
Click to expand...
Click to collapse
thanks! I have made a nandroid backup but I think I may have a corrupted boot.img.
Where can I get a stock rom? Is the one from the link I posted good enough?
Emhalwis said:
Download a stock rom ( unless you made a nandroid backup)
Click to expand...
Click to collapse
Is there a way to return to stock while keeping CWM ?
You can stay on stock rom while you are rooted. You can google it. I got my 2.3.4 from ardoid.com
Its a stock rom with added arabic support. Since you dont need arabic. It wont make any difference to you.
Sent from my Nexus S using XDA App
I'm not asking for keeping root, only to revert back to stock while keeping CWM
Clockworkmod will stay on your phone. As far as i know, all your phone recoveries will be done through cwm
Sent from my Nexus S using XDA App
Emhalwis said:
Clockworkmod will stay on your phone. As far as i know, all your phone recoveries will be done through cwm
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
I read somewhere that flashing a stock ROM will restore the stock boot/recovery. Is it true ?
That i cant answer u. But i can say that i went back and forth between roms. Reverting to stock when needed. CWM stayed on my phone.
Sent from my Nexus S using XDA App
Ok, will have try. Thanks
dude if install stock rom via odin then u will loss cwm bt iheard u cn gt .zip files of stock roms using tht u wont loss cwn
Thats what im trying to say. The only way (i think) to lose cwm is using odin. But you can find zip stock roms. Thats what i did
Sent from my Nexus S using XDA App
Okay..so to close my question. I just followed this and everything went back to stock.
theunlockr.com/2011/01/20/how-to-unroot-the-nexus-s
1. followed the link above.
2. I remain rooted but recovery went back to stock. no more clockwork.
3. after booting, was alerted of a 2.3.4 update..so I updated again.
4. marketplace has been upgraded to the new interface (probably bec of the update)
5. to install screenshot app and fontchanger..I needed to have super user, so I just installed Clockwork (recovery-clockwork-3.0.2.4-) again and installed SU (su-2.3.6.1-ef-signed.zip) via SD card install.
6. so far, everything's good.
If you have some questions, feel free to ask.
Thanks for the clarification !
I have a galaxy tab 2 7.0 [GT-P3113]
I just flashed cwm recovery on it and rooted it, I've just wanted to try and uninstall clockworkmod and go back to stock recovery, I searched everywhere but I couldn't find anything for my tab model.
I'm running android 4.0.4, didn't flash any ROMs yet.
http://forum.xda-developers.com/showthread.php?p=25892251
That should help you get back to stock.
Sent from my MB870 using xda app-developers app
Maximinus I said:
http://forum.xda-developers.com/showthread.php?p=25892251
That should help you get back to stock.
Sent from my MB870 using xda app-developers app
Click to expand...
Click to collapse
Thanks, I have some questions because I coudln't post a reply to that post.
-I live in egypt and I bought my tab from the US, this rom is for the US so should I flash it normally? (will I get the OTA updates)?
-should I backup my data and so? (sorry it's my first device)
You should get ota's as its 100% stock. As far as flashing it no need to backup anything. You won't have root or cwr to use your backup. Flash via Odin and you should be good to go.
Sent from my GT-P3113 using xda premium
*I done that for my Galaxy Ace, I believe should be the same.
reverting back to Stock from CWM all you need is Odin and stock firmware which able to obtain from sammobile.
flash is with stock ROM via Odin will bring everything back to stock. *after flash, make sure swipe your data & cache OTHERWISE it will stuck and become boot-loop.
kimtatt said:
*I done that for my Galaxy Ace, I believe should be the same.
reverting back to Stock from CWM all you need is Odin and stock firmware which able to obtain from sammobile.
flash is with stock ROM via Odin will bring everything back to stock. *after flash, make sure swipe your data & cache OTHERWISE it will stuck and become boot-loop.
Click to expand...
Click to collapse
I did flash the stock ROM and recovery via odin, and it worked perfectly, thanks for the info thought because once I forgot to wipe data and it was stuck on boot-loop till I reached recovery mode.
I meant isn't there a normal way to go back to android recovery without flashing new ROM?
Can't really have stock recovery AND root... seeing as you install root via CWM
Besides you can do way more with CWM over stock.
Sent from my GT-P5113 using XDA Premium HD app
p3100
he any one knows the link for uninstalling cmw in p3100
and also the unroot package
Create a new thread,don't post on an old one.
If you are rooted with custom recovery you can flash only the stock recovery using mobile odin.
Sent from my GT-P3110 using Tapatalk 2
getting back to original recovery from twrp recovery
i have karbonn smart tab 10 (cosmic) .i have installed twrp recovery on my tab. but i cant find any zip files when i go into recovery and twrp is not working properly.i cant even root my tab. i want to go back to original recovery.please help.
Do you have a P5100 , P5110 or P5113 ? It don´t sounds like!
If not - don´t use this files! This might brick your device!
If you don´t have a P51XX you need to find a Stock-Recovery or Custom-Recovery for your Device.
If you have P51XX download and flash a StockRom - or extract the recover.img inside the XXX_HOME.tar.md5 and make it Odin-Flashable using this tool and flash it with Odin.
Help me pls
HI i have micromax a25 i root my phone using (Root+½-T) then i used mobile uncle app for cwm recover
but after this i cant even open recovery by vol up+power+menu key ............ so i cant even install update or backups................ please guide me to fix............. plz plz im in trouble............ shud i use this method????
how to remive cwm recovery from sony xperia m dual. please help me
Maximinus I said:
http://forum.xda-developers.com/showthread.php?p=25892251
That should help you get back to stock.
Sent from my MB870 using xda app-developers app
Click to expand...
Click to collapse
Please help me to remove cwm recovery from.sony xperia m dual to its stock
shamsul1993 said:
Please help me to remove cwm recovery from.sony xperia m dual to its stock
Click to expand...
Click to collapse
please find your correct thread.
Hey all , hope u rocking with your tabs.
anyway, I decided to move on and divorce my stock rom forever
I just would like to ask about a few little things before i get starting flashing.
1 - can i flash Panaroid(Cauz it's awesome and very fast software cycle) with the stock CWM?
2 - if i decided to return back to stock ICS, i will have to wipe data then and would that make me vulnerable to the famous brick bug?
3 - how to backup my stock rom just in case?
4 - what's the biggest sacrifices i will make due to this migration?
well, 2 days now and no one answers these questions :S
Well I have Paranoid installed and its perfect. I backed up my stock ICS and I have a backup. That's all.
Sent from my GT-P6800 using xda premium
samomamo said:
Well I have Paranoid installed and its perfect. I backed up my stock ICS and I have a backup. That's all.
Sent from my GT-P6800 using xda premium
Click to expand...
Click to collapse
okay, the question is: did you installed it with the stock cwm?
and should i back it up with stock cwm also?
bassem.mohsen said:
okay, the question is: did you installed it with the stock cwm?
and should i back it up with stock cwm also?
Click to expand...
Click to collapse
No I have TWRP recovery, I backed up with that and installed the PA.
Sent from my GT-P6800 using xda premium
Hi I am newbie as well. Still see and learn from this great helpful website. I would like to share my experience to play around with custom ROM. and so far still safe. These steps are from what I have done although I have not used the wonderful [ROM][JB : 4.1.2][CM10 Hybrid][P6800\P6810\i815] Paranoid Android v2.22 [17/10][WIP], I am still waiting for the nearly perfect of this rom. .
I am still satisfied with [ROM] Singha ROM Version 1.1.1 (SEP 26 2012). http://forum.xda-developers.com/showthread.php?t=1886370
bassem.mohsen said:
Hey all , hope u rocking with your tabs.
anyway, I decided to move on and divorce my stock rom forever
I just would like to ask about a few little things before i get starting flashing.
1 - can i flash Panaroid(Cauz it's awesome and very fast software cycle) with the stock CWM? It is better using CWM instead of Stock recovery. I am using old version Locerra's recovery at this http://forum.xda-developers.com/showthread.php?t=1542897&page=13. Works perfect so far.
2 - if i decided to return back to stock ICS, i will have to wipe data then and would that make me vulnerable to the famous brick bug? if you have downloaded stock ICS thenI would suggest using CWM when you are installing from zip file. So far I did the bellow steps if using CWM :
1) place on internal SD
2) reboot to CWM
3) wipe data/factory reset in CWM
4) wipe cache
5) advanced > wipe dalvik, wipe battery stats
6) install .zip from INTERNAL SD
7) reboot
Another method is using mobile odin or PC Odin to flash with Stock ICS. You can see at this http://forum.xda-developers.com/showthread.php?t=1469635
3 - how to backup my stock rom just in case? You have to install CWM Recoverry. TWRP http://forum.xda-developers.com/showthread.php?t=1809295 or Locerras' recoverry
4 - what's the biggest sacrifices i will make due to this migration? see The OP updated log. It is nearly perfect and there is still bug. But it depends on individual's opinion.
Click to expand...
Click to collapse
oh, thanks very much, cakrabayu.
much appreciate your help.
ok i have another quick question for people who tried PA roms.
did you tried intensive hd games .. does the performance is better?
Hi – I have a stubborn issue with my Blaze 4G not working on CM roms, I would appreciate any help you guys can provide. Below are the details:
I recently bought a T-Mobile Samsung Galaxy S Blaze 4G, and did the following:
- Rooted it using the following guide (it now has ICS)
- SIM Unlocked it using the following guide (now it works on other networks)
- Updated to CWM 6.0.3.8, since JB roms needs it
- Flashed the T769-UVLH5 modem, since CM support it
And now when I flash CM 10 stable or 10.2 nightly it gets stuck in booting and displaying the CM logo animation screen, after few minutes it reboots and does it all over again.
I remember when I upgraded to CM JB on my SGS3 I needed to flash a JB stock rom on it to get the new boot loaders for JB, but I saw no mention of this on this forum. What else am I missing?
Thanks.
TINGEA said:
Hi – I have a stubborn issue with my Blaze 4G not working on CM roms, I would appreciate any help you guys can provide. Below are the details:
I recently bought a T-Mobile Samsung Galaxy S Blaze 4G, and did the following:
-Rooted it using the following guide (it now has ICS)
-SIM Unlocked it using the following guide (now it works on other networks)
-Updated to CWM 6.0.3.8, since JB roms needs it
-Flashed the T769-UVLH5 modem, since CM support it
And now when I flash CM 10 stable or 10.2 nightly it gets stuck in booting and displaying the CM logo animation screen, after few minutes it reboots and does it all over again.
I remember when I upgraded to CM JB on my SGS3 I needed to flash a JB stock rom on it to get the new boot loaders for JB, but I saw no mention of this on this forum. What else am I missing?
Thanks.
Click to expand...
Click to collapse
You wiped data/cache/system? Reinstall it. Anyways use the new 6.0.4.4 recovery.
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Somcom3X said:
You wiped data/cache/system? Reinstall it. Anyways use the new 6.0.4.4 recovery.
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Click to expand...
Click to collapse
Thanks Somcom. I have to admit that I forgot to do the wipes. but even after doing the wipes (data/system/ factory rest/ cach/devalk) and reinstalling the CM nightly, I still have the same issue.
as for recovery, I updated to the latest version using the rom manager, and according to the official site clockworkmod[dot]com[slash]rommanager (can't post links) I have the latest version for Blaze. how do you get the 6.0.4.4 on blaze?
I still feel it's a ICS vs JB bootloaders issue, but not sure how to proceed next.
Thanks!
TINGEA said:
Thanks Somcom. I have to admit that I forgot to do the wipes. but even after doing the wipes (data/system/ factory rest/ cach/devalk) and reinstalling the CM nightly, I still have the same issue.
as for recovery, I updated to the latest version using the rom manager, and according to the official site clockworkmod[dot]com[slash]rommanager (can't post links) I have the latest version for Blaze. how do you get the 6.0.4.4 on blaze?
I still feel it's a ICS vs JB bootloaders issue, but not sure how to proceed next.
Thanks!
Click to expand...
Click to collapse
No boot loaders man. This is before Samsung's complications.
Recovery is here.
http://d-h.st/AFu
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Thanks Somcom3X, but still didn't work. When installing the CM room in recovery 6.0.4.4 I get a bunch of getprop assert failures. This used to work on the previous version (6.0.3.8). Now the Rom won't install.
Also, I'm curious what did you mean by this is before Samsung's complications?
Thanks
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
TINGEA said:
Thanks Somcom3X, but still didn't work. When installing the CM room in recovery 6.0.4.4 I get a bunch of getprop assert failures. This used to work on the previous version (6.0.3.8). Now the Rom won't install.
Also, I'm curious what did you mean by this is before Samsung's complications?
Thanks
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
After 2011 samsung began installing software and counters to try and prevent people from rooting and installing custom firmwares.
knox is an example of this.
These devices don't have any of that complicated security.
You handy with odin? Your recovery is not right. Just to be clear, what is your model number?
If it is T 7 6 9, your good to go to odin. I'd recommend going back to stock, and then install a recovery and you should be good to go.
Somcom3X said:
After 2011 samsung began installing software and counters to try and prevent people from rooting and installing custom firmwares.
knox is an example of this.
These devices don't have any of that complicated security.
You handy with odin? Your recovery is not right. Just to be clear, what is your model number?
If it is T 7 6 9, your good to go to odin. I'd recommend going back to stock, and then install a recovery and you should be good to go.
Click to expand...
Click to collapse
Thanks again, I use the guide here to convert the image into a tar.md5 to flash using odin, but after flashing successfully I still have the same issue when installing the CM zip file in recovery, and yes it is the T-mobile Samsung Galaxy S Blaze 4G T769.
any other possible causes?
BTW - when I was flashing via Odin my upload phone screen was showing that I have a custom rom and the counter was 1.... do I need to fix that?
TINGEA said:
Thanks again, I use the guide here to convert the image into a tar.md5 to flash using odin, but after flashing successfully I still have the same issue when installing the CM zip file in recovery, and yes it is the T-mobile Samsung Galaxy S Blaze 4G T769.
any other possible causes?
Click to expand...
Click to collapse
SOLUTION:
The reason your stock recovery system keeps getting overwritten at Android startup is because of a script that is being run.* All you need to do is either rename this script or simply delete it.
Please keep in mind that if you restore your stock ROM, this script will be restored with it so you will have to rename or delete it again.* Do the following:*
1.
Make sure your device is powered on and running normally,
2.
Make sure you have rooted your device and that you have all of the necessary permissions in order to manipulate system files.*
3.
In the root file system go to \system\etc
4.
Find the file named install-recovery.sh and either rename it or, as I did, delete it.*
That’s all there is to it.*
Please keep in mind that you will need to flash your custom system recovery one more time after modifying the script file.* After that, reboot away and you will always be able to get back into your new system recovery.
Good Luck and Happy Tweaking.
Click to expand...
Click to collapse
Try that.
Found it here http://mark.candleshoreblog.com/201...-factory-stock-roms-at-android-system-reboot/
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Somcom3X said:
Try that.
Found it here http://mark.candleshoreblog.com/201...-factory-stock-roms-at-android-system-reboot/
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Click to expand...
Click to collapse
Thanks Somcom3X - but I'm not sure this is needed for my case. I read the original blog post and my recovery does not get overwritten. I actually rebooted multiple times into CWM recovery and each time it is the same 6.0.4.4.
I also went into the /system/etc folder and there is no install_recovery.sh file.
to clarify, here is where I'm stuck now:
- when I use CWM 6.0.3.8 CM install completes successfully, but then CM will not boot, and will keep on cycling on the boot logo screen.
- when I use CWM 6.0.4.4 I can't start to install CM as it complained that my phone is not t769.
in all cases I'm using CM 10.2 nightly for T769.
Thanks for the help.
You should delete assert lines at the top of the zip's updater-script and it will let you flash it.
Sent from my SAMSUNG-SGH-T769 using Tapatalk
I removed the assert lines from the updater script, and it was able to complete the install process afterwards, however when I booted the new CM 10.0 system it got stuck on the cyanogenmod boot logo. I made sure I do a system/data rest, cleared cash, and cleared devalk.
I do not think it's an issue with my recovery as I'm getting the same result as I did with the official 6.0.3.8.
Something else is going on.
Any ideas?
Thanks.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
TINGEA said:
I removed the assert lines from the updater script, and it was able to complete the install process afterwards, however when I booted the new CM 10.0 system it got stuck on the cyanogenmod boot logo. I made sure I do a system/data rest, cleared cash, and cleared devalk.
I do not think it's an issue with my recovery as I'm getting the same result as I did with the official 6.0.3.8.
Something else is going on.
Any ideas?
Thanks.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Tar back to stock GB. Upgrade to ICS. Then root and install cwm. Flash away
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Somcom3X said:
You should delete assert lines at the top of the zip's updater-script and it will let you flash it.
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Click to expand...
Click to collapse
Thanks Somcom3X - but this is more trouble than what I wanted to put in - I'll stick with the rooted stock ROM I have. I was hoping the process was a little more straight forward, similar to my SGS3.
thanks for all your help thus far!
Somcom3X said:
Tar back to stock GB. Upgrade to ICS. Then root and install cwm. Flash away
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Click to expand...
Click to collapse
Ok, my rooted ICS stock is acting up (random shutdowns and such), so I need to give this another try and get this phone to CM.
I tared back to stock GB, skipped the upgrade to ICS (was not able to upgrade via the ROM software update option), flashed CWMR (5.0.4.x) via Odin, upgraded to CWMR 6.0.4.5, installed CM 11 nightly, and then wiped data/factory rest and Dalvik .... and ....
it is still stuck on the boot screen....
I seriously would appreciate a silver bullet right now!
TINGEA said:
Ok, my rooted ICS stock is acting up (random shutdowns and such), so I need to give this another try and get this phone to CM.
I tared back to stock GB, skipped the upgrade to ICS (was not able to upgrade via the ROM software update option), flashed CWMR (5.0.4.x) via Odin, upgraded to CWMR 6.0.4.5, installed CM 11 nightly, and then wiped data/factory rest and Dalvik .... and ....
it is still stuck on the boot screen....
I seriously would appreciate a silver bullet right now!
Click to expand...
Click to collapse
Hmm. Go back to stock ics, flash a 10.2 recovery, then flash whatever you desire.
Sent from my SAMSUNG-SGH-T769 using Tapatalk
What is a10.2 recovery? Is it a certain version of CWMR? And do I need to flash it via Odin? Thanks
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
TINGEA said:
What is a10.2 recovery? Is it a certain version of CWMR? And do I need to flash it via Odin? Thanks
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
It would be cwm 6.0.2.7
You can flash the img through a zip or by terminal on the phone.
Odin needs a tar'd recovery img
Sorry been very busy.
Have you tried this?
http://forum.xda-developers.com/showthread.php?t=2577265
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Thanks Somcom3X - I looked all over this forum and the internet, and could not find a link for a 6.0.2.7 CWM for Blaze - I found it for other phones but not Blaze. can you please point me to a link if you happen to know of one. the official site does not have an archived list of previous versions.
as for the provided link, I did follow it through, and downloaded the recovery Tar (it was CWM 5.5.04) but that yielded the same results after installing CM 10 and 10.2 - stuck at boot screen logo. I'm reasonably confident now that it is not a recovery issue, as I flashed half a dozen different versions and none worked with CM 10, 10.2, or 11.... it has to be something else!
Thanks.
TINGEA said:
Thanks Somcom3X - I looked all over this forum and the internet, and could not find a link for a 6.0.2.7 CWM for Blaze - I found it for other phones but not Blaze. can you please point me to a link if you happen to know of one. the official site does not have an archived list of previous versions.
as for the provided link, I did follow it through, and downloaded the recovery Tar (it was CWM 5.5.04) but that yielded the same results after installing CM 10 and 10.2 - stuck at boot screen logo. I'm reasonably confident now that it is not a recovery issue, as I flashed half a dozen different versions and none worked with CM 10, 10.2, or 11.... it has to be something else!
Thanks.
Click to expand...
Click to collapse
I'm very sorry for the delay. Been very very busy.
https://www.dropbox.com/s/awp1zy4u3x34a2v/CWM-cm-10.2-Recovery-t769.zip
That is my personal 10.2 recovery. Works fine for me.
The author is me, but I was too lazy to change the lines.
Sent from my SAMSUNG-SGH-T769 using Tapatalk
Hi Guys, Im on 4.1.2. Revently i flash a 4.3 mod 4 rom via odin(this rom dont update bootloader) and stuck in boot animation. Then i re flash a 4.1.2 stock rom via odin.. but didnt boot.. then i tick erase nand all.. and then flash again 4.1 then some how i manage to reboot phone. But unfortunatly efs was missing and sent to repair.. now my phone works and have imei
That was background and i dont know it awas impact for this or not. After i recive my phone i got nand backup and now when ever i flash rom via recovery or odin always stuck in the boot animation(AOSP and stock) even tried to wipe data after flashing . At onece phone got boot as normal after flashing 4.1.2 stock and again there was no Imei.. tried everthing at efs pro and xda other thread information no use.. so i revert back to nandroid backup and everything works again. So guys im stuck in 4.1.2
, befor this happen i was able to flash galaxy project 4.3 , xtream 4.3 and and all other roms without problem.. and now i cant flash anything always stuck in boot animation and cant do anthing.. tried evrything full wipes and after flashing data wipes etc.. but no use.. even i cant flash odian stock roms.. it always stuck in bootanimation...im stuck to this nandroid backup please guys help me. I want to flash roms as i was before..
Sent from my GT-I9305 using xda app-developers app
Reboot to recovery, Wipe cache.
I did it no use...
What about sending it for repair again, then when it comes back do a nandroid restore of your data only (not system and other partitions), see whether that works.
Off topic: This should be in Q&A?
Sent from my GT-I9305 using Tapatalk
Oha im sry I got crzy because to this prob ill re write thread in q and a.
Sent from my GT-I9305 using xda app-developers app
Well I was in the same pickle
whicever 4.3 rom i flashed through odin i got stuck in boot logo
Also tried customs 4.3 roms stuck a boot logo
Here what flashed philz recovery + 4.1.2 rom
no imei
flashed persues kenerl network + imei back
Backed up everything
Using Philz recovery wipe data factory reset + wipe cache + dalvik cache
in mount and storage section formated everything
Used odin to flash a 4.3 stock package it worked
AMoizK said:
Well I was in the same pickle
whicever 4.3 rom i flashed through odin i got stuck in boot logo
Also tried customs 4.3 roms stuck a boot logo
Here what flashed philz recovery + 4.1.2 rom
no imei
flashed persues kenerl network + imei back
Backed up everything
Using Philz recovery wipe data factory reset + wipe cache + dalvik cache
in mount and storage section formated everything
Used odin to flash a 4.3 stock package it worked
Click to expand...
Click to collapse
Well I try this.. I was so upset because of this problem.. ill check and tell you mate.. did u also wipe internal sd ?
Sent from my GT-I9305 using xda app-developers app
AMoizK said:
Well I was in the same pickle
whicever 4.3 rom i flashed through odin i got stuck in boot logo
Also tried customs 4.3 roms stuck a boot logo
Here what flashed philz recovery + 4.1.2 rom
no imei
flashed persues kenerl network + imei back
Backed up everything
Using Philz recovery wipe data factory reset + wipe cache + dalvik cache
in mount and storage section formated everything
Used odin to flash a 4.3 stock package it worked
Click to expand...
Click to collapse
Man you are a hero thank you very much... now my phone working.... love you man....
Sent from my GT-I9305 using xda app-developers app
1Ishara said:
Man you are a hero thank you very much... now my phone working.... love you man....
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Took me a more then a month to solve this
AMoizK said:
Took me a more then a month to solve this
Click to expand...
Click to collapse
Yes bro I was very upset and I gave up every hope.. I thougt Ill stuck in 4.1... but you save me... thanks bro thanks lot... no words to say...
Sent from my GT-I9305 using xda app-developers app