What is this?
Well, when I stopped working on the QSD8K (Bravo, BravoC and Nexus One) CM(9/10) Ports, I did make a promise that I would make some support for the CDMA (BravoC) users that would enable them to use some of the other existing ICS/Jellybean ports for the Desire. This seams to be needed as developers in this section has abandoned any CDMA support a long time ago. So here it is. A CDMA Support Package which should be able to be flashed on top of any HTC Desire GSM ICS/Jellybean ROM that will enable support for HTC Desire CDMA.
What does it contain?
CDMA ICS/Jellybean Kernel forked from Evervolv
Key Layout files
Libraries for lights, gps, sensors and RIL
Firmware
Permissions needed for CDMA to replace GSM
CDMA APN Configurations
How to use
Download an GSM ICS/Jellybean ROM for HTC Desire
Extract the ZIP and remove the line
Code:
assert(getprop("ro.product.device") == "bravo" || getprop("ro.build.product") == "bravo");
from META-INF/com/google/android/updater-script if it exists, or simply change 'bravo' to 'bravoc' (Otherwise install will fail as you do not have a Bravo but a BravoC)
Repack and flash the ROM
Now flash either ICS or Jellybean Support Package
Well, reboot an hope that it works
Download
Version JB-1.2 from Mediafire.com or Sourceforge.net
Version ICS-1.0 from Mediafire.com or Sourceforge.net
Additional Downloads
Repacked ROM and Support Package by @inb22
Note
I do not have this device, so I cannot promise that it will work. I did however release a supporting ROM for this device for about a year and this package is build based on that. If it does not work, then write in this thread and we can make it work together. Just remember that a logcat helps a lot.
Sep 24, 2013
With some help from @grad_devil and he's CDMA device, we got the package to boot. A big thanks for he's time helping me test the changes needed.
Sep 24, 2013
Added Support Package for ICS based ROM's
Changelog
JB-1.2
-----
* Some small changes to the defconfig (Kernel config)
* Changed some vendor files
* Fixed some bugs in the installers build.prop update script
Click to expand...
Click to collapse
You absolute beast, you. My dev phone can finally HOLO on latest
Any possibility of a USB host driver on this, though?
-----------------------------
Reporting in: ParanoidAndroid/PIE is currently at a blank screen (surprisingly not HTC). May be the boot logo is messed up. Will give it some time and report back. Rebooting produces no change... will try an AOSP rom. Factory reset + dalvik cleared, will retry.
Same scenario for this ROM: http://forum.xda-developers.com/showthread.php?t=2070704
Odp: [KERNEL/MOD] BravoC Jellybean Support Package
OP was asking for logcat's if something goes wrong, just saying.
Sent from my HTC Desire using xda premium
"short" logcat: http://pastebin.com/AMQSLaG8
"long" logcat: http://pastebin.com/vf9byPpF
Looks like a bootloop, but hell, what do I know?
dwegiel said:
"short" logcat: http://pastebin.com/AMQSLaG8
"long" logcat: http://pastebin.com/vf9byPpF
Looks like a bootloop, but hell, what do I know?
Click to expand...
Click to collapse
I am already working on this issue, but thanks
Hopefully I will have something new uploaded in a short while
New update is out, this has been tested by @grad_devil hwo did manage to get it to boot Evervolv JellyBean
We still need someone to test the Telephony Service, but other than that it seams to be working just fine.
Edit:
I have also added an ICS Support Package that should work with most ICS Based ROM's for the GSM Desire. Note however that this has not been tested yet, but it has been build based on the Jellybean testing of the JB-1.2 version
assert(getprop("ro.product.device") == "bravo" || getprop("ro.build.product") == "bra
Hello! at me it doesn't turn out to begin in any way installation after removal of a line of assert (getprop ("ro.product.device") == "bravo" || getprop ("ro.build.product") == "bravo");
thus installation doesn't happen on any disks! ! !
there is also any solution of a problem?
forgive my English.
*klim* said:
Hello! at me it doesn't turn out to begin in any way installation after removal of a line of assert (getprop ("ro.product.device") == "bravo" || getprop ("ro.build.product") == "bravo");
thus installation doesn't happen on any disks! ! !
there is also any solution of a problem?
forgive my English.
Click to expand...
Click to collapse
Solution is RIGHT IN THE POST. Edit updater-script to say bravoc instead of bravo or delete the line...
---------- Post added at 02:28 AM ---------- Previous post was at 02:26 AM ----------
Thanks for the update will test on CM VJ 10.1 and report back.
BOOTSCREEN!!!
"Welcome
Just a sec..."
Wifi functional, phone not, but not needed for me
Will check the scenario for ParanoidAndroid now. Same case, all functional except for phone.
Also, sign me up for beta testing if you can.
dwegiel said:
Solution is RIGHT IN THE POST. Edit updater-script to say bravoc instead of bravo or delete the line...
---------- Post added at 02:28 AM ---------- Previous post was at 02:26 AM ----------
Thanks for the update will test on CM VJ 10.1 and report back.
BOOTSCREEN!!!
"Welcome
Just a sec..."
Wifi functional, phone not, but not needed for me
Will check the scenario for ParanoidAndroid now. Same case, all functional except for phone.
Also, sign me up for beta testing if you can.
Click to expand...
Click to collapse
Are we talking about 3G connection or the phone in general? What about sound?
Sent from my GT-I9300 using xda premium
dk_zero-cool said:
Are we talking about 3G connection or the phone in general? What about sound?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Sound is functional, and the radio is completely crashed, CM VJ believes it has no sim card, PA doesn't know what is going on. So no radio at all, acts like airplane mode.
dwegiel said:
Sound is functional, and the radio is completely crashed, CM VJ believes it has no sim card, PA doesn't know what is going on. So no radio at all, acts like airplane mode.
Click to expand...
Click to collapse
Okay. Well at least we are close. Could you try the ICS version on an ICS Rom? The diffs between those will help me narrow down the possible issues.
Sent from my GT-I9300 using xda premium
Oh 6 disks already I tried, on one installation after change of a line of bravo on bravoC didn't go... in what problem?
dk_zero-cool said:
Okay. Well at least we are close. Could you try the ICS version on an ICS Rom? The diffs between those will help me narrow down the possible issues.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Sure, can do. Will report back on the 4.0.4 ROM with fixed camera
Good job! Does it support JB 4.2.2?
Sent from my Nexus 7 using xda app-developers app
gnokiar said:
Good job! Does it support JB 4.2.2?
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
4.0.x, 4.1.x and 4.2.x
Sent from my GT-I9300 using xda premium
dk_zero-cool said:
4.0.x, 4.1.x and 4.2.x
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Tks
Sent from my Nexus 7 using xda app-developers app
dk_zero-cool said:
4.0.x, 4.1.x and 4.2.x
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Do you know which GSM JB 4.1.x rom can be flashed? I have tried VJ and Evervolv, but can not booted.
Sent from my Nexus 7 using xda app-developers app
Hi, DK!
Thank you for your concern for us, CDMA Desire users.
I installed several GSM Roms with your packages. Not one of them is not working fully.
1. VJ Jelly Bean 4.2.2 v5.2 -
Mobile Network - not working
Calls - working, when mobile network switch is off. Notification icon is empty
3G/Data - not working
Wifi - working
WifI Tether - not tested
Bluetooth - not working and the switch is not active
GPS - working
Sound - working
USB - working
Camera - working, but requires restart application
Notification - artifacts remain on the screen after dropping
2. Evervolv Turba 3.3.0p1 Jelly Bean 4.2.2
Mobile Network - not working
Calls - working, when mobile network switch is off. Notification icon is empty
3G/Data - not working
Wifi - working
WifI Tether - not tested
Bluetooth - not working and the switch is not active
GPS - working
Sound - working
USB - working
Camera - working,
Notification - working
3. Marius.a ICS 4.0.4 with good video recording v3.5
Mobile Network - not working
Calls - working, when mobile network switch is off. Notification icon is empty
3G/Data - not working and the switch is not active
Wifi - not working and the switch is not active
WifI Tether - not tested
Bluetooth - working
GPS - working
Sound - working
USB - working
Camera - working,
I don't know how you'd go about it but the issue of radio is seriously it. After that, it's a perfect support package!! Also, i just noticed your thread says september when it should say february or march
dk, what help/logs do you need from me to help you out in getting the radio working? Thanks
Related
Hey everyone. This is a CyanogenMod 9 build for the U8150.
Working:
WiFi
Touchscreen - for Melfas and Synaptics
Smooth UI
Graphics
Booting
Bluetooth
RIL i.e. Phone and mobile network reception
Mobile data - 2G and 3G
Keyboard in landscape
USB Tethering
WiFi Tethering - with external apps
Camera
Audio
Not working:
Live Wallpapers - will pretty much never happen since we don't have a GPU
Hardware Video Decoding - without Qualcomm's help will pretty much never happen
Video recording - not much work
If you like my work and want to give a small amount of money for me please click the "Donate to me" button under my username. Otherwise I would be grateful if you can click the "Thanks" button on the bottom right of this post. Thanks
Bug reports - https://github.com/tilal6991/android_device_huawei_u8150/issues
Device repository - https://github.com/ColdFusionX/android_device_huawei_u8150
Kernel source - https://github.com/CommonFusionX/huawei-kernel-msm7x25
FLASH THIS RECOVERY BEORE FLASHING THE ROM - Thanks to alanorth http://www.mediafire.com/?bpjbc93xb7izits
FLASH ORDER:
1. ROM
2. Wipe Data
3. Boot into ROM
4. Reboot into recovery
5. GAPPS
Download:
23/05/2012 Nightly - download
GAPPS - market etc - download
Changelog:
03/12/2011:
Initial release
24/12/2011:
Fix Audio
Fix Mobile data
Make graphics smoother
Sync with CM repos
Notification power widgets
28/12/2012:
Fixed loads of stuff
29/01/2012 - WiFi Fix:
Fixed WiFi
13/02/2012
Properly fixed WiFi
Fixed Phone crash
Fixed keyboard
Multiple other graphical errors
23/05/2012
Pretty much fixed everything apart from what's on the broken list
The biggest update for a ROM you'll pretty much ever see.
Completely update to CM9 repos - includes Theming
coool, looking forward to it
Nice... hope I can enjoy it soon..^_^
Sent from my U8150 using XDA App
cool
Cool eagerly waiting
Sent from my U8150 using XDA App
Excellent Tital!Keep up the Nice Work
every thing else don't work....cool looks like its built for my phone . i just droped my ideos and the digitizer is cracked .........cryingggggggggggggggggggg
and its not available in my country...
but suprisingly the top portion of the touch screen is still working and the hardware buttons are still working....so.....in short i need a rom that can be totally controlled by the d-pad / harware buttons................
can you help ..plzzzzzz
lol i suggest you get yourself a new phone
kriaz said:
every thing else don't work....cool looks like its built for my phone . i just droped my ideos and the digitizer is cracked .........cryingggggggggggggggggggg
and its not available in my country...
but suprisingly the top portion of the touch screen is still working and the hardware buttons are still working....so.....in short i need a rom that can be totally controlled by the d-pad / harware buttons................
can you help ..plzzzzzz
Click to expand...
Click to collapse
CyanogenMod 9
Good Job Tilal..nice work..
Can't wait to see
great waiting from mexico
wonderful
i want it
good luck
if you need i can be a beta tester
RIL is now working and graphics have been improved.
However mobile data is still not working but will be fixed.
tilal6991 said:
RIL is now working and graphics have been improved.
However mobile data is still not working but will be fixed.
Click to expand...
Click to collapse
Good
Still can't fix ril yet in my rom :'(
Great news! Keep up the good work!
what is RIL?
Giogts said:
what is RIL?
Click to expand...
Click to collapse
Radio Interface Layer. It's basically the part that is responsible for phones calls, text messages, mobile internet etc.
I can't flash your last update.
This is the error message:
Installing update...
assert failed: getprop("ro.product.device") == "u8150" || getprop("ro.build.product") == =u8150"
E:Error in /sdcard/cm_u8150-ota-eng-lalit.zip
(Status 7)
Installation aborted
What's wrong?
sette7nani said:
I can't flash your last update.
This is the error message:
Installing update...
assert failed: getprop("ro.product.device") == "u8150" || getprop("ro.build.product") == =u8150"
E:Error in /sdcard/cm_u8150-ota-eng-lalit.zip
(Status 7)
Installation aborted
What's wrong?
Click to expand...
Click to collapse
I think ... You are not using CWM v5.0.2.7?
Ryunosuke_Aozora said:
I think ... You are not using CWM v5.0.2.7?
Click to expand...
Click to collapse
Latest CWM for huawei ideos 8150 is 3.0.2.4
edit : downloaded again zip file....same error
sette7nani said:
Latest CWM for huawei ideos 8150 is 3.0.2.4
Click to expand...
Click to collapse
aorth has been build 5.0.2.7!
http://forum.xda-developers.com/showpost.php?p=19619557&postcount=2987
IMPORTANT
THREAD MOVED HERE
MOTIVATION
Welcome in the official thread of the project. This post is made to let discover you why this project is born. We are two universitary students that want more about a new branch of th IT Area, the Embedded OS Porting. We have a particular device, the HUAWEI IDEOS U8150, so our port is in this direction.
So don't ask to us why we are porting this version of Android with this device, because this project starts for educate ourself to the porting of Android OS, in particular we are oriented to port CyanogenMod ver 9. We made research to define a good porting for this device, so all the support ,moral, technical and economic(we need more RAM and CPU frequency) is really appreciated. We are also thinking to port, after this ROM Porting, the MIUI v4.
We work to create a stable ROM that could enjoy all great people that have this device. We think that newest releases of Android could run on this kind of mid-low level devices, so we make all the possible to complete this work.
The xDEOS team
raidenfox
sebaker
INFO ON THE STATUS OF PROJECT
Official Website: Here
G+ Page (daily updates) : Here
ABOUT THE ROM
This is the status of our working ROM:
ALPHA 2 (4.0.4)
CODENAME
xDEOS-9.0.0-RC0-u8150-UNOFFICIAL-alpha2-signed
Download
http://filevelocity.com/aw368vhr28qq/xDEOS-9.0.0-RC0-u8150-UNOFFICIAL-alpha2-signed.zip
Changelog
Update to 4.0.4 Distribution
Removed annoying Red Border
Modified codename
----------------------------------------------------------------------------------------------------
ALPHA 1 (4.0.3)
CODENAME
cm_u8150-9.0.0-KANG-alpha1-signed.raidenfox
WORK
USB
MMC
Browser
Gallery (without HW Acceleration)
Overclock
Thetering
Audio
GPS
Contacts
Wi-Fi
RIL (partially solved)
SENSORS (G - Sensor)
NOT WORK
Graphics Hardware Acceleration
Camera
Bluetooth
other bugs not known..
All the details about the ROM (status of bugs in bugtracker section) is available on this site.
http://www.xdeos.eu
Sorry for my bad english
SCREENSHOT
CWM INSTALLATION
Boot in recovery mode
Flash CWM [http://www.mediafire.com/?esg18iw9lx9axol]
Reboot you Phone in recovery again
FLASH THE ROM
Select Install from zip
Select cm_8150 zip file downloaded on official site
Flash it
After flash do a wipe/cache
Clean cache
Reboot phone
You have installed xDEOS!
it's compiled from source or ported from other device ?
Compiled from source, obtained with git clone on official CM git repository.
tonystark88 said:
Compiled from source, obtained with git clone on official CM git repository.
Click to expand...
Click to collapse
hmm and where download link and can't open xdeos website it say website not found
Link in the page:
http://www.xdeos.eu/index.php/79-releases/76-alpha-1
or directly
http://www.mediafire.com/?e1hccwb1h7jk9yu
tonystark88 said:
Link in the page:
http://www.xdeos.eu/index.php/79-releases/76-alpha-1
or directly
http://www.mediafire.com/?e1hccwb1h7jk9yu
Click to expand...
Click to collapse
thanks i will try on my mom u8150
Read the issues and bugs first
xDEOS ICS 4.0.4 coming soon....
Thank you very much, WIFI can not connect
wi fi does not work that hangs acquisition inidrizzo IP
bluetooth does not work
the gallery is not working
every time you click somewhere in there the red outline of the screen and is very annoying
2g 3g works
the release is cut in the bottom
USB works
micro sd is read
The GAPPS not work
well, is very good for an alpha search of the red outline fixare unlock the wi fi and bluetooth
I must say that this rom is really very fluid
tonystark88 said:
All the details about the ROM (status of bugs in bugtracker section) is available on this site.
http://ww.xdeos.eu
Sorry for my bad english
Click to expand...
Click to collapse
correct the your site in main "www" not "ww"
Thanks for the great work, continue to work!
Thanks form the work
We investigate on the wifi and red square on the screen, we'll fix it in the nxt release
Some issues are reported in the official site
Sent from my GT-S5660 using xda premium
Red border fixed ... Wait for new build...
Sent from my GT-S5660 using xda premium
WIFI and GAPPS fix? Thank you.
Add multi touch in next release plz
Sent from my Huawei U8150 using xda premium
We have completed the building or new version of CyanogenMod that implements ICS 4.0.4. The new release improve the previous functionalities and some new fix like the RED BOX Fix and a new CODENAME. Unfortunately my friend sebaker is not here so if anyone of you want test rom can do it and write old/new bugs in this post
generalnikitos said:
Add multi touch in next release plz
Sent from my Huawei U8150 using xda premium
Click to expand...
Click to collapse
We are trying to solve4 first the main problems than we add all functionalities. In official site there's a buugtracker section and i'll unlock the possibility to write all bugs signaled and suggestion for new features
sdq928 said:
WIFI and GAPPS fix? Thank you.
Click to expand...
Click to collapse
Test the Wi-Fi, i can't test it now because i don't have device at this moment . GAPPS not included yet, will be in the next release. With time we include all , must be have only patience
Here we can talk about CM10/JB
Here you can post Questions/Bugs about CyanogenMod 10 for Galaxy 3 developed by Marcellusbe
Only Rule - Do not ask for ETA. We all are excited about this port, yet please be patient.
Will try to keep it updated frequently.
Please stop posting your Question in the DEV thread to keep it clean.
Working
- SDcard
- openfimg
- Wifi
- Vibrator
- Sensors
- GSM (need to disable pin code)
- Screenshot
- Sound
- Internet connection
- Deepsleep kernel panic
- Bluetooth (big thanks to pmanian!)
- DSPManager
- UMS
- Mobile data
- backported xt_qtaguid and xt_quota2 for data usage stats (Data usage) - I feel thats a little buggy. Please confirm
Non Working
- Camera
- Video codecs
- Battery statistics
- Location services
- GPS
- USB Tethering
- Ring Tone looping (i.e The incoming call will play the ring tone only once)
Downloads
Minimal JB Google apps - 26-July-2012 (Google Now not included) - Thanks to butler1233
App2SD
Google Now
Google Now
Its a kind of work around to get your google search bar with "Google Now cards", but without voice.
Install Titanium Back up, remove the existing search application. :angel:
Install the new Google Now attached here (thanks to ilievski.ace) Just copy this to your sdcard and open it :fingers-crossed:
Open the application, just give next,next ....
When it ask for you to signin click "No, may be later" something like that...
Now you will be able to get the Google Now cards, results without voice , but Im not sure what and how its happening ... :highfive:
You have to type the commands in the search bar but who wants to type them here instead of in the app
Working
Remind me in *** minutes - Set the alarm in *** mins
Weather in *** - Gives the weather card
math calculations - Gives answer
How old is *** - Give age with image
Send text to (number) message ****
Not Working
Note to self - Not Working - Able to sense the action, but fc in the end.
Call ***
Send text to (contact name like mummy) message ***
Send email to
Will update this post if i get more info on how to get Offline Voice Keyboard.
I believe Google Now depends on some libs and other stuff apart from the apk, will try to find out and update here
The main prob may/will be the system free space, GoogleNow, Offline voice Keyboard these stuffs requires a load of space
Anandababu153 said:
Reserved again
Click to expand...
Click to collapse
good one ....
Will Kelly bean run smooth on our phone is it possible , or do we definitely need 3.4 kernel for jb to run smoothly on our phone
Sent from my GT-I5800 using xda app-developers app
sudersanmurthy said:
Will Kelly bean run smooth on our phone is it possible , or do we definitely need 3.4 kernel for jb to run smoothly on our phone
Sent from my GT-I5800 using xda app-developers app
Click to expand...
Click to collapse
Jb is running pretty smoothly. Of course, kernel 3.4 would Be beter.
sudersanmurthy said:
Will Kelly bean run smooth on our phone is it possible , or do we definitely need 3.4 kernel for jb to run smoothly on our phone
Sent from my GT-I5800 using xda app-developers app
Click to expand...
Click to collapse
Hillbeast is working hard to port 3.4 kernel to our device, as he stated 3.4 is no where near to use.
Marce is right now porting it using CM7 kernel. We can get a smooth JB, but not the smoothest, take it with a pinch of salt there.
Can I know who are the devs helping marcel with jelly bean
Sent from my GT-I5800 using xda app-developers app
sudersanmurthy said:
Can I know who are the devs helping marcel with jelly bean
Sent from my GT-I5800 using xda app-developers app
Click to expand...
Click to collapse
I hope, once marcel able to provide a "Flash-able build" he would add the credit list and Dev-list.
When devs use ths samsung kernel for developing, they have to change the ROM source code extencively to work with the kernel. Also many features like data usage manager and bluetooth strongly rely on kernel, and needs more than just kernel or ROM modification to make it work.
For bluetooth, samsung had very different ROM and KERNEL working together and was engeneered by the devs as they had all the code and knew the system.
On other hand, our devs don't have access to the whole source, and can't make the perfect ROM.
once the kernel 3.x Project is finished, the standard drivers in android will be more usefull.
I guess marcel is quite busy these dayz... imho the working list is good enough for the rom to be released to the public.. but after all its marce's project and he is more experienced. Anywayz, does any one know what is planned to be fixed before the first release. Cause the working list is now the same as ics (except mobile data) so being on ics now is not worth as we have better.
nishant_713 said:
I guess marcel is quite busy these dayz... imho the working list is good enough for the rom to be released to the public.. but after all its marce's project and he is more experienced. Anywayz, does any one know what is planned to be fixed before the first release. Cause the working list is now the same as ics (except mobile data) so being on ics now is not worth as we have better.
Click to expand...
Click to collapse
I too wonder the same I think he should have created the thread after completing build 1 , because I cannot control the excitement , well I think just thinking that he will release after fixing mobile data because it is very important let's hope right only he knows when he is going to release it
Sent from my GT-I5800 using xda app-developers app
What is UMS?
Sent from my GT-I5800 using xda app-developers app
SamG3apollo said:
What is UMS?
Sent from my GT-I5800 using xda app-developers app
Click to expand...
Click to collapse
You can check this link for UMS http://forum.xda-developers.com/showthread.php?t=1389375
Thanks
Sent from my GT-I5800 using xda app-developers app
SamG3apollo said:
Thanks
Sent from my GT-I5800 using xda app-developers app
Click to expand...
Click to collapse
You should click thanks button instead of posting thanks in words that is how it works that encourages members to help others , i am just saying i am not asking youto click the thanks button :angel::fingers-crossed:
Since now moblie data is on working list
Anybody try compiling this?
Wow.. mobile data works... great work.. im finding marc post to thank him
Hi
I am worried about camera. It has been the pain in the a$$ since cyanogenmod ports. Even now its not completely working on CM7 and 9
Warning:
I have no GT-N7100, so I don't test it. You should backup your phone!
What's Working:
- Touchscreen and hardware keys
- Touch key lights
- 3G
- SMS
- MMS
- Calls
- Wifi
- Sound
- Cameras
- Internal / external storage
- GPS
- Wifi Hotspot
- Bluetooth
- Recorder
- Torch
- NFC
Installation:
- Download ROM kernel and gapps
- Place on SDCARD
- Wipe factory rest 2x
- Flash MIUI rom
- Reboot into rom
- Then Reboot into recovery
- Flash gapps
- Reboot
- Enjoy
Support language list:
English(iBotPeaches)
Polish(Acid-miuipolskapl)
Slovak(MIUICzech-Slovak)
Czech(MIUICzech-Slovak)
French(ingbrzy)
Hungaria(vagyula1)
Danish(1982Strand)
Holland(Redmaner)
German(Bitti09)
Spain(ingbrzy)
Italy(Mish)
Arabic(MIUI-Palestine)
Norway(ingbrzy)
JUden(HebMIUI)
Vietnam(HoangTuBot)
Indonesia(ingbrzy)
Turkish(ingbrzy)
Thai(rcset)
Russian(miuisu)
Ukrainian(KDGDev)
Swedish(ingbrzy)
Dutch(Redmaner)
Brazilian(ingbrzy)
Korean(nosoy1)
Romanian(ingbrzy)
Japanese(ingbrzy)
Portugal(miuiportugal)
ScreenShot:
View attachment 2509175
View attachment 2509176
View attachment 2509178
Thanks to @savadam
Quick Review:
Changelog:
Click me!
Download Link:
4.4.10
(choose n7100 in the aroma)
Mega
(All ROM & OTA will find in this folder)
Gapps: goo.im
Old version:
4.4.3
4.3.28
4.3.23
4.3.21
4.3.15
4.3.8
4.2.28
Credits:
CyanogenMod
MIUI Official Team
Psndna88
MIUI Port Team
Wow. Thanks so much for porting this over.
I use my phone for a lot of office work, so I am going to wait until a few folks try and talk about stability, battery life etc. Super happy that it is here though...
what is the android version?
2sovereign said:
what is the android version?
Click to expand...
Click to collapse
4.2.2
Sent from my iPhone using Tapatalk
Thanks a lot for lovely MIUI for our Note 2 on 4.2.2....thanks again...
After installation it's already asking for update..what to do? update it ?
PFA the Screenshot...
Bug : Internal and External SD cards mounted on PC does not showing contains at all or not showing properly (mainly the old contains)..
Multilang ?
Thanks
Sent from my GT-N7100 using XDA Premium 4 mobile app
lontu said:
Thanks a lot for lovely MIUI for our Note 2 on 4.2.2....thanks again...
After installation it's already asking for update..what to do? update it ?
PFA the Screenshot...
Bug : Internal and External SD cards mounted on PC does not showing contains at all or not showing properly (mainly the old contains)..
Click to expand...
Click to collapse
You must refresh gallery by yourself or restart media scan yourself.
Sent from my iPhone using Tapatalk
VuBoo said:
Multilang ?
Thanks
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Sorry. Not mutli language. If you use OTA ,I don't think you can OTA successful
Sent from my iPhone using Tapatalk
problem with calls
after I update to latest version i have no service, any fix.
we can update?
daproject said:
after I update to latest version i have no service, any fix.
we can update?
Click to expand...
Click to collapse
Please flash new version by mega.no.cz. Sorry for my wrong operator.
Sent from my iPhone using Tapatalk
jing95916 said:
You must refresh gallery by yourself or restart media scan yourself.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
How ? Can you please help?
daproject said:
after I update to latest version i have no service, any fix.
we can update?
Click to expand...
Click to collapse
Extract attached archive and Replace this build.prop in /system using root explorer or es file explorer or others and change the permission to rw-r--r-- and reboot
It will work..
thanks
One major problem is that...application not running long time in the backgroud...example is poweramp..I am listening music but it died after 10-15 minutes without reason..
Flashing 10.2 Agni kernel (lewa test kernel) makes incall other party voice muted...I am not able to hear other party though he is able to hear me clearly....
lontu said:
One major problem is that...application not running long time in the backgroud...example is poweramp..I am listening music but it died after 10-15 minutes without reason..
Flashing 10.2 Agni kernel (lewa test kernel) makes incall other party voice muted...I am not able to hear other party though he is able to hear me clearly....
Click to expand...
Click to collapse
I fixed now with 4.3.8. Please try again
Sent from my iPhone using Tapatalk
Latest version 4.3.8 while trying to install...failed with the following error..
SYNTAX ERROR!!!! aroma-config on line 55 col 2
E: Error in /external_sd/firmware/miui_nian_sc03e_4.3.8_054477d56d_4.2.zip
(Status 1)
Installation aborted.
Please advice with the solution..
lontu said:
Latest version 4.3.8 while trying to install...failed with the following error..
SYNTAX ERROR!!!! aroma-config on line 55 col 2
E: Error in /external_sd/firmware/miui_nian_sc03e_4.3.8_054477d56d_4.2.zip
(Status 1)
Installation aborted.
Please advice with the solution..
Click to expand...
Click to collapse
Oh. I will try to have a look
Sent from my iPhone using Tapatalk
Fixed.
Sent from my iPhone using Tapatalk
Did u added any special tweaks or anything? And whats Android version?
Sent from my GT-N7100 using Tapatalk
GonDr said:
Did u added any special tweaks or anything? And whats Android version?
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
it is 4.2.2 so cm or aosp based means you'll get the crappy aosp camera but otherwise it is really nice.
WiFi based location not working
I'm using the latest version of miui on my n7100 and WiFi based location detection is not working. Is there something wrong with my device or is this a known issue with miui? If it's a known issue, is someone working on a fix for this?
Hello Everyone,
First of all, I don't want to earn credits to making this guide on how to install CM 11 on Xperia E3 (d2203) I'm just translating the tutorial made by #moiremoi
Warning: This modification of your phone state will remove the warranty. Moiremoi, FXPTeam, xda developpers staff or even myself will decline any responsability on possibles issues you could get by using this ROM, flashing or any method used from this tutorial.
REVIEW:
This ROM is an unofficial CM11 ROM created from the FXP Team. It is stable and final (this mean that there would not be any update anymore)
Its is 4.4.4 based
SCREENSHOTS:
HOW TO INSTALL:
Requirements:
Sony Xperia E3 d2203 (i don't tested other versions so idk if it works or not)
Unlocked bootloader
CWM or Teamwin Recovery
Rooted android 4.4.4 firmware 18.5.C.0.19
Better do a recovery of your phone state before doing any modification
Things to download:
CM 11 ROM : http://uploaded.net/f/zx9n6h/
GAPPS : https://www.androidfilehost.com/?fid=95916177934553399 (please take these for CM11 or Android 4.4.4)
Updater-Script: http://www.mediafire.com/file/400vsdcaasc9619/updater-script (modified "Updater-script" to avoid ''Leo'' error)
How to do:
- First of all, open the CM11 archive without unzipin it and navigate to "META-INF/com/google/android" and replace the existing "updater-script" file to the one required (link to download required file just over there)
- Copy and paste the CM11 + gapps zip to your SD card (just place it to sd, do not make it in any folder to retrieve it faster)
- Turn you phone on (or reboot it) and press many times the Vol + and Vol - at the booting sony screen to go on recovery mode
- Navigate into the menu and choose Wipe cache/data (if you forget to do a wipe, you just can forget to install the ROM)
- Then;
install zip from sdcard >> choose zip from sdcard >> (select ROM .zip) >> Yes
install zip from sdcard >> choose zip from sdcard >> (select GAPPS .zip ) >> Yes
Now, you just have to wait untill finish and choose reboot now
BUGLIST:
No NFC
Not really listed as bug but I find the audio power a bit lowered compared to Stock
Time of the phone battery charge (from 0 to 100%) a bit longer (it can depend on which usb you use too, maybe not a bug)
Camera, audio and every other sony related things are 100% WORKING
I will not help you if you occurs any type of errors, I installed this ROM and its working, If you don't know how to... just go ahead
Thanks and credits to:
FXP team for the ROM
Moiremoi for the modified updater script which is making the rom working and tutorial (on another website)
Myself for testing, editing and for screenshots.
(If I forgot someone please tell it to me through MP)
Have fun and enjoy your new CM11 ROM !
Regards,
Exerath
Well, this changes many...
So the error was only in updater-script?? How? I see you added these lines, but they shouldn't take any effect.
Code:
getprop("ro.product.device") == "leo" ||
getprop("ro.build.product") == "leo" ||
In build.prop on D2203, there isn't ANY ro.product.device value
When there is a bad value, updater-script stops installing, but when there isn't any value, it fallsback (assumes a virtual value) to leo, am I right?
Why the hell is just our device so different , we don't even have last_kmsg where it is supposed to be
Vynikal said:
Well, this changes many...
So the error was only in updater-script?? How? I see you added these lines, but they shouldn't take any effect.
Code:
getprop("ro.product.device") == "leo" ||
getprop("ro.build.product") == "leo" ||
In build.prop on D2203, there isn't ANY ro.product.device value
When there is a bad value, updater-script stops installing, but when there isn't any value, it fallsback (assumes a virtual value) to leo, am I right?
Why the hell is just our device so different , we don't even have last_kmsg where it is supposed to be
Click to expand...
Click to collapse
Can i do this process for d2212 xperia e3 model
jayesp0411 said:
Can i do this process for d2212 xperia e3 model
Click to expand...
Click to collapse
porting in progress.
no network.
D2212
---------- Post added at 09:06 PM ---------- Previous post was at 09:03 PM ----------
Vynikal said:
Well, this changes many...
So the error was only in updater-script?? How? I see you added these lines, but they shouldn't take any effect.
Code:
getprop("ro.product.device") == "leo" ||
getprop("ro.build.product") == "leo" ||
In build.prop on D2203, there isn't ANY ro.product.device value
When there is a bad value, updater-script stops installing, but when there isn't any value, it fallsback (assumes a virtual value) to leo, am I right?
Why the hell is just our device so different , we don't even have last_kmsg where it is supposed to be
Click to expand...
Click to collapse
i downloaded cm11 from fxp and flashed it without editing updater-script it failed than i wipe data and cache then flashed it worked.
i was using my own latest cwm with fixed resolution.
(i have tested it with ported kernel)
device is leo bug was because old cwm was made for leo new fixed resolution is for flamingo.
so no bug,s
vinay said:
porting in progress.
no network.
D2212
---------- Post added at 09:06 PM ---------- Previous post was at 09:03 PM ----------
i downloaded cm11 from fxp and flashed it without editing updater-script it failed than i wipe data and cache then flashed it worked.
i was using my own latest cwm with fixed resolution.
(i have tested it with ported kernel)
device is leo bug was because old cwm was made for leo new fixed resolution is for flamingo.
so no bug,s
Click to expand...
Click to collapse
I seen that you did a lot of great work for the E3, now I am just curious to know if you (or someone else reading this) can make the volume of CM11 a bit louder (aka stronger)
I reflashed stock 4.4.2 with Viper4Android on my E3 and the sound is drastically higher as with CM11+Viper4Android (On 4.4.4 xLoud is missing too, idk why, I tought it were a stock official firmware ??)
I checked every setting about sound but I don't see any error, could it be the sony XLoud thing (absent on CM11) which could make this issue with lower powered sound?
Searching on Google to ''install or flash xLoud" but no hope atm, I found nothing working (a lot of error flashing .zip but none working) :/
This is known on almost all devices. The volume is always lower on AOSP ROMs than on stock. Xloud isn't easy to add, only very good themers are able to include it. You have to understand Xloud is proprietary and not open-sourced.
Trust me, it was truly a shock, when I heard silent speakers of my old LWW with CM just installed
Vynikal said:
This is known on almost all devices. The volume is always lower on AOSP ROMs than on stock. Xloud isn't easy to add, only very good themers are able to include it. You have to understand Xloud is proprietary and not open-sourced.
Trust me, it was truly a shock, when I heard silent speakers of my old LWW with CM just installed
Click to expand...
Click to collapse
Volume was higher with cm 10 on my xperia J as on Stock, on AOSP we have the possibility to disable audio security imposed from governments, on stock not, that's why I asked
Thanks Exerath for thé translation !
you guy,s are lucky.
i am thinking why did i bought this dual variiant even if rom get ported to non lte dual sim still gona need porting for second sim support.
never gonna buy non lte or dual sim again.
even tho there is no lte in my area.
all i get is no baseband.
vinay said:
you guy,s are lucky.
i am thinking why did i bought this dual variiant even if rom get ported to non lte dual sim still gona need porting for second sim support.
never gonna buy non lte or dual sim again.
even tho there is no lte in my area.
all i get is no baseband.
Click to expand...
Click to collapse
Why not release it for d2202? Network might work for us
Finally updated to 4.4.4 xD
hell_lock said:
Why not release it for d2202? Network might work for us
Finally updated to 4.4.4 xD
Click to expand...
Click to collapse
Well uday tested it.
No network on d2202 even. I will upload it in free time.
problem is with ril.
(and before flashing cm11 if your wifi is off then it won't turn on. That's what i found. And i gave up. i can't fix ril tried replacing libril.so, refrences_ril.so and one more lib i forgot name. And tried thousands of combination of stock and cm11)
(i am not experienced in porting uploading kernel soon on this thread.)
Sent from my D2212 using XDA Free mobile app
D2202,d2212 support.
Port moved here => http://forum.xda-developers.com/xperia-e3/general/d2203-testers-cm11-t3179189
vinay said:
@Exerath can you give a link to this post on OP so other,s can find it easily.
STEPS
* DOWNLOAD boot.zip attached below.
* flash cm11 then flash this boot.img inside boot.zip.
it will work on d2202 and d2212
BUG,s
NO RIL NO BASRBAND (mean no network)
who is gonna fix bug,s => probably not me.
warning make sure your wifi is on before flashing cm11 or you can,t turn on after flashing cm11.
Click to expand...
Click to collapse
I will but not today, it is late and Im freaking ko
btw: If we flash your kernel, install hudge game and go back to normal, it would be working ? or not ?
Exerath said:
I will but not today, it is late and Im freaking ko
btw: If we flash your kernel, install hudge game and go back to normal, it would be working ? or not ?
Click to expand...
Click to collapse
Nope this is a just port kernel for d2202 and d2212.
Sent from my D2212 using XDA Free mobile app
Can i flash this on d2212 if yes what are the bugs????
Plz provide direct download link
Sent from my Moto G 2014 using XDA Premium 4 mobile app
amritmalviya said:
Can i flash this on d2212 if yes what are the bugs????
Plz provide direct download link
Sent from my Moto G 2014 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
just see two posts up thare is written everything.
Exerath said:
I will but not today, it is late and Im freaking ko
btw: If we flash your kernel, install hudge game and go back to normal, it would be working ? or not ?
Click to expand...
Click to collapse
no ril working then what is use of flashing cm11
Sent from my Moto G 2014 using XDA Premium 4 mobile app
amritmalviya said:
no ril working then what is use of flashing cm11
Sent from my Moto G 2014 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ril problem is just in d2212 and d2202 so other,s are enjoying it with ril.
back button and menu not work, how to solve?
entony80 said:
back button and menu not work, how to solve?
Click to expand...
Click to collapse
--------------------------------------------------------------------------------------------
easy solution.
use a hammer to press back button with full force.
-------------------------------------------------------------------------------------------
hard solution
try re flashing whole rom and wipe data/cache
--------------------------------------------------------------------------------------------